SB 220: Firearms dealers: storage and security.
- Session Year: 2019-2020
- House: Senate
- Latest Version Date: 2019-02-07
|
Date
|
Status
|
|---|---|
| Sep 9, 2019 | Ordered to inactive file on request of Assembly Member Calderon. |
| Jun 20, 2019 | Read second time. Ordered to third reading. |
| Jun 19, 2019 | From committee: Do pass. (Ayes 12. Noes 5.) (June 19). |
| Jun 11, 2019 | Coauthors revised. |
| May 16, 2019 | Referred to Com. on PUB. S. |
| May 2, 2019 | In Assembly. Read first time. Held at Desk. |
| May 2, 2019 | Read third time. Passed. (Ayes 26. Noes 10.) Ordered to the Assembly. |
| Apr 23, 2019 | Read second time. Ordered to third reading. |
| Apr 22, 2019 | From committee: Be ordered to second reading pursuant to Senate Rule 28.8. |
| Apr 5, 2019 | Set for hearing April 22. |
| Apr 2, 2019 | From committee: Do pass and re-refer to Com. on APPR. (Ayes 5. Noes 2.) (April 2). Re-referred to Com. on APPR. |
| Mar 21, 2019 | Set for hearing April 2. |
| Feb 21, 2019 | Referred to Com. on PUB. S. |
| Feb 8, 2019 | From printer. May be acted upon on or after March 10. |
| Feb 7, 2019 | Introduced. Read first time. To Com. on RLS. for assignment. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Jun 19, 2019 | Do pass. | Assembly Standing Committee on Appropriations |
Passed |
|
| Jun 11, 2019 | Do pass and be re-referred to the Committee on [Appropriations] | Assembly Standing Committee on Public Safety |
Passed |
|
| May 2, 2019 | Senate 3rd Reading SB220 Hill et al. | Senate Floor |
Passed |
|
| Apr 2, 2019 | Do pass, but first be re-referred to the Committee on [Appropriations] | Senate Standing Committee on Public Safety |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
SENATE THIRD READING
STR Bill Id:SB 220
Author:(Hill)
As Introduced Ver:February 7, 2019
Majority vote
SUMMARY:
Enhances the security requirements placed on the premises where a licensed firearms dealer conducts his or her business.
Major Provisions
- Provides that anytime a firearm licensee is not open for business, each particular firearm shall be stored in secure facility by one of the following methods, except as specified:
- Secured with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises;
- Stored in a locked fireproof safe or vault that meet the minimum safety standards developed by the Attorney General (AG) for gun safes, as specified;
- Stored in a firearms display case that is fitted with smash-proof polycarbonate panels that are at least one-quarter inch thick made with a steel frame that is no thinner than 12 gauge, and is fitted with a hardened steel lock where the case opens to access the firearm;
- Stored in a windowless room equipped with a steel security door fitted with a deadbolt lock, and that does not have a door exposed to the outside of the building; or
- Stored behind a steel roll-down door or security gate, or in a locked steel gun rack by use of a hardened steel bar.
- Requires a licensed firearms dealer, if the licensee's location is at street level, and firearms are secured by means of a hardened steel rod or cable, to install, or cause to be installed, concrete or hardened steel bollards, or other barriers, such as security planters or other devices with a similar structural integrity of bollards, to protect the location's front entrance, any floor to ceiling windows, and any other doors that can be breached by a vehicle. The bollards shall meet the following requirements:
- Be no less than four inches in diameter and 36 inches in height from the ground;
- Be spaced so as not to obstruct access so as not to obstruct accessible routes or accessible means of egress in compliance with the Americans with Disabilities Act; and,
- Be capable of stopping a 5,000-pound vehicle travelling at 30 miles per hour, in compliance with specified testing standards.
COMMENTS:
According to the Author:
According to the author, "Guns are stolen from gun stores due to a lack of adequate security. In some cases, guns are left in their display cases without suitable locking mechanisms, making them easy targets for burglars.
"In a series of robberies during 2016, hundreds of guns were stolen from guns stores in the cities of San Carlos, Folsom, Sunnyvale, Ceres, Petaluma, Ventura, Elk Grove, Rocklin, Grass Valley, and El Cerrito. In most of the burglaries, thieves used a vehicle as a battering ram to break into the gun store. Several of the stores left the guns in their glass display cases, making them easily accessible to the robbers. Similar smash and grab firearm thefts have occurred more recently in Loomis, Fairfield, Stockton, and Dixon.
"Across the nation, ATF data shows that gun story robberies are becoming an increasing occurrence. Burglaries of gun stores have increased by over 70 percent since 2013. The number of firearms stolen during burglaries has also increased by over 130%, from 3,355 in 2013 to 7,841 in 2017.
"SB 220 implements best practices for storing guns when a gun store is closed for business.
The bill strengthen gun dealer security standers, but also takes into consideration the impact on these businesses by providing several options for compliance."
Arguments in Support:
According to California Brady United Against Gun Violence, "Senate Bill 220 will help prevent 'crash and grab' and other FFL burglaries by expanding the requirements for securely storing firearms when the FFL is not open for business. Under existing law, all inventory firearms must be stored in the licensed location when the FFL is closed. Existing law requires only one of three security options, which has proven to be insufficient. SB 220 tightens security measures by requiring that that the licensed location be a secure facility with steel bars on the windows, deadbolts or a metal grate on doors, and steel bars, metal grating, or an alarm system to protect A/C vents. SB 220 also require FFLs to choose one of the eight additional security measures listed in the bill. These new requirements will help prevent entry in the first place, or prevent the theft of guns if entry is gained."
Arguments in Opposition:
According to the California Rifle and Pistol Association, "Although California already must store and secure firearms. SB 220 would increase the storage and security requirements of all firearms in the inventory of a licensed firearms dealer.
"California law already requires each firearm to be secured by storing the firearm in a secure facility that is a part of, or that constitutes, the firearms dealer’s business premises, and securing the firearm with a steel rod or cable with specified features, or storing the firearm in a locked fireproof safe or vault in the business premises."
FISCAL COMMENTS:
According to the Assembly Appropriations Committee, minor costs to the Department of Justice (DOJ) Records Management Branch to update the master offense tables.
VOTES:
SENATE FLOOR: 26-10-2
YES: Allen, Archuleta, Atkins, Beall, Bradford, Caballero, Dodd, Durazo, Galgiani, Glazer, Hertzberg, Hill, Hueso, Jackson, Leyva, McGuire, Mitchell, Monning, Pan, Portantino, Rubio, Skinner, Stern, Umberg, Wieckowski, Wiener
NO: Bates, Borgeas, Chang, Grove, Jones, Moorlach, Morrell, Nielsen, Stone, Wilk
ABS, ABST OR NV: Hurtado, Roth
ASM PUBLIC SAFETY: 6-2-0
YES: Jones-Sawyer, Bauer-Kahan, Kamlager-Dove, Quirk, Santiago, Wicks
NO: Lackey, Diep
ASM APPROPRIATIONS: 12-5-1
YES: Gonzalez, Bloom, Bonta, Calderon, Carrillo, Chau, Friedman, Gabriel, Maienschein, Petrie-Norris, Quirk, Robert Rivas
NO: Bigelow, Brough, Diep, Fong, Obernolte
ABS, ABST OR NV: Eduardo Garcia
UPDATED:
VERSION: February 7, 2019
CONSULTANT: Gregory Pagan (Counsel) / PUB. S. / (916) 319-3744 FN: 0001114
Date of Hearing: June 19, 2019
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Lorena Gonzalez, Chair
SBPCA Bill Id:SB 220
Author:(Hill) – As Introduced Ver:February 7, 2019
Policy Committee: | Public Safety | Vote: | 6 - 2 |
|
| ||
|
|
Urgency: No State Mandated Local Program: No Reimbursable: No
SUMMARY:
This bill requires, as of July 1, 2020, security measures on any premise where a licensed firearms dealer conducts business be enhanced by one of several methods. Specifically, this bill:
- Provides, with a few exceptions, that anytime a firearm licensee is not open for business, each particular firearm must be stored in secure facility by one of the five enhanced specified methods:
- Secured with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Stored in a locked fireproof safe or vault that meets the minimum safety standards developed by the Attorney General (AG) for gun safes, as specified.
- Stored in a firearms display case that is fitted with smash-proof polycarbonate panels that are at least one-quarter inch thick made with a steel frame that is no thinner than 12 gauge, and is fitted with a hardened steel lock where the case opens to access the firearm.
- Stored in a windowless room equipped with a steel security door fitted with a deadbolt lock, and that does not have a door exposed to the outside of the building.
- Stored behind a steel roll-down door or security gate, or in a locked steel gun rack by use of a hardened steel bar.
- Secured with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Requires a licensed firearms dealer, if the licensee's location is at street level and if firearms are secured by means of a hardened steel rod or cable, to install, or cause to be installed, concrete or hardened steel bollards, or other barriers, to protect the location's front entrance, any floor to ceiling windows and any other doors that can be breached by a vehicle.
FISCAL EFFECT:
Minor costs to the Department of Justice (DOJ) Records Management Branch to update the master offense tables.
COMMENTS:
- Purpose and Background. Current law requires that any time when a firearms licensee is not open for business, all inventory firearms must be stored in the licensed location. All firearms must be secured using one of three specified methods as to each particular firearm. SB 220 increases the current security standards for gun stores. According to the author:
Stolen guns often make their way into the hands of criminals. As an example, according to an NBC Bay Area report, which analyzed 70,000 lost or stolen guns between 2010 and 2015, 2,655 of the guns were connected to a crime. Further, stolen guns are unlikely to be found or recovered. According to a federal Department of Justice analysis of firearms stolen during household burglaries, no more than 20% are recovered within 6 months of being stolen.
- Support. According to California Brady United Against Gun Violence:
Senate Bill 220 will help prevent “crash and grab” and other FFL burglaries by expanding the requirements for securely storing firearms when the FFL is not open for business.
- Opposition. According to the California Rifle and Pistol Association:
SB 220 would impose unnecessary additional security requirements costing tens of thousands of dollars on most firearms dealers. Although some larger firearms dealers may be able to absorb these costs, SB 220 would have a devastating financial impact on smaller dealers, driving many of them out of business – with the greatest impact felt in rural areas.
- Prior Legislation. SB 464 (Hill), of the 2017-2018 Legislative Session, was identical to this bill and was vetoed.
Analysis Prepared by: Kimberly Horiuchi / APPR. / (916) 319-2081
Date of Hearing: June 11, 2019
Chief Counsel: Gregory Pagan
ASSEMBLY COMMITTEE ON PUBLIC SAFETY
Reginald Byron Jones-Sawyer, Sr., Chair
SBPCA Bill Id:SB 220
Author:(Hill) – As Introduced Ver:February 7, 2019
SUMMARY: Enhances the security requirements placed on the premises where a licensed firearms dealer conducts his or her business. Specifically, this bill:
- Provides that anytime a firearm licensee is not open for business, each particular firearm shall be stored in secure facility by one of the following methods, except as specified:
- Secured with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises;
- Stored in a locked fireproof safe or vault that meet the minimum safety standards developed by the Attorney General (AG) for gun safes, as specified;
- Stored in a firearms display case that is fitted with smash-proof polycarbonate panels that are at least one-quarter inch thick made with a steel frame that is no thinner than 12 gauge, and is fitted with a hardened steel lock where the case opens to access the firearm;
- Stored in a windowless room equipped with a steel security door fitted with a deadbolt lock, and that does not have a door exposed to the outside of the building; or
- Stored behind a steel roll-down door or security gate, or in a locked steel gun rack by use of a hardened steel bar.
- Secured with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises;
- Requires a licensed firearms dealer, if the licensee's location is at street level, and firearms are secured by means of a hardened steel rod or cable, to install, or cause to be installed, concrete or hardened steel bollards, or other barriers, such as security planters or other devices with a similar structural integrity of bollards, to protect the location's front entrance, any floor to ceiling windows, and any other doors that can be breached by a vehicle. The bollards shall meet the following requirements:
- Be no less than four inches in diameter and 36 inches in height from the ground;
- Be spaced so as not to obstruct access so as not to obstruct accessible routes or accessible means of egress in compliance with the Americans with Disabilities Act; and,
- Be capable of stopping a 5,000-pound vehicle travelling at 30 miles per hour, in compliance with specified testing standards.
- Be no less than four inches in diameter and 36 inches in height from the ground;
- Provides that the above provisions related to security barriers shall not apply to elevated loading docks, or to a licensee that is unable to comply due to local ordinances, covenants, lease conditions, or similar conditions not under the control of the licensee.
- States that bollards installed prior to September 1, 2017, shall be considered compliant if they are composed of concrete or hardened steel and do not obstruct accessible routes or accessible means of egress in compliance with the Americans with Disabilities Act, and have clear width of not less than 36 inches but no more than 60 inches.
- Provides that unless a licensee complies with the above interior and exterior security requirements, the licensee shall install locking steel roll-down doors on any perimeter doors and floor to ceiling windows. Emergency exits are exempt from the requirement where installation would be in violation of state or local fire code.
- Delays implementation of the above firearm licensee security requirement until July 1, 2020.
EXISTING LAW:
- States that, in general and subject to exceptions, the business of a firearms licensee shall be conducted only in the buildings designated by the business license. (Pen. Code, § 26805, subd. (a).)
- Provides that a licensed firearms dealer may take possession of firearms and commence preparation of registers for the sale, delivery, or transfer of firearms at any gun show or event if the gun show or event is not conducted from any motorized or towed vehicle. A person conducting business shall be entitled to conduct business as authorized at any gun show or event in the state, without regard to the jurisdiction within this state that issued the license provided the person complies with all applicable laws, including, but not limited to, the waiting period specified, and all applicable local laws, regulations, and fees, if any. (Pen. Code, § 26805, subd. (b)(1).)
- Allows a licensed firearms dealer to engage in the sale and transfer of firearms other than handguns, at specified events, subject to the prohibitions and restrictions contained in those sections. (Pen. Code, § 26805, subd. (c)(1).)
- Provides a licensed firearms dealer may also accept delivery of firearms other than handguns, outside the building designated in the license, provided the firearm is being donated for the purpose of sale or transfer at an auction or similar event specified. (Pen. Code, § 26805, subd. (c)(2).)
- Authorizes a licensed firearms dealer to deliver a firearm to a purchaser, transferee, or person being loaned the firearm at one of the following places:
- The building designated in the license;
- The places specified as express exemptions; and,
- The place of residence of, the fixed place of business of, or on private property owned or lawfully possessed by, the purchaser, transferee, or person being loaned the firearm. (Pen. Code § 26805, subd. (d).)
- The building designated in the license;
- Provides that a licensed firearms dealer conducting a firearms business shall publicly display that person's license issued, or a facsimile thereof, at any gun show or event, as specified. (Pen. Code § 26805, subd. (b)(2).)
- Requires that any time when the licensee is not open for business, all inventory firearms must be stored in the licensed location. All firearms must be secured using one of the following methods as to each particular firearm:
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensees business premises;
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a boltcutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises; or,
- Store the firearm in a locked fireproof safe or vault in the licensee's business premises. (Pen. Code, § 26890, subd. (a).)
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensees business premises;
- States that the licensing authority in an unincorporated area of a county or within a city may impose security requirements that are more strict or are at a higher standard than those that are required under state law. (Pen. Code, §26890, subd. (b).)
- Provides that upon written request from a licensee, the licensing authority may grant an exemption from compliance with storage requirements if the licensee is unable to comply with those requirements because of local ordinances, covenants, lease conditions, or similar circumstances not under the control of the licensee. (Pen. Code, § 26890, subd. (c).)
- States that specified storage requirements do not apply to a licensee organized as a nonprofit public benefit corporation, if both of the following conditions are satisfied:
- The nonprofit public benefit or mutual benefit corporation obtained the dealer s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation; and
- The firearms are not handguns. (Pen. Code, § 26890, subd. (d).)
- The nonprofit public benefit or mutual benefit corporation obtained the dealer s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation; and
- Requires all licensed firearms dealers to store in a secure facility all firearms manufactured and all barrels for firearms manufactured. (Pen. Code, § 29140.)
- Defines a "secure facility" to mean that the facility satisfies all of the following:
- The facility is equipped with a burglar alarm with central monitoring;
- All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry; and,
- All perimeter doorways are designed in one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock;
- A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door;
- A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe;
- Hinges and hasps installed so that they cannot be removed when the doors are closed and locked;
- Heating, ventilating, air conditioning, and service openings are secured with steel bars, metal grating, or an alarm system;
- No perimeter metal grates are capable of being entered by any person;
- Steel bars used to satisfy security requirements are not capable of being entered by any person;
- Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended;
- Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards; and,
- Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe. (Pen. Code, § 29141.)
FISCAL EFFECT: Unknown
COMMENTS:
- Authors Statement: According to the author, “Guns are stolen from gun stores due to a lack of adequate security. In some cases, guns are left in their display cases without suitable locking mechanisms, making them easy targets for burglars.
In a series of robberies during 2016, hundreds of guns were stolen from guns stores in the cities of San Carlos, Folsom, Sunnyvale, Ceres, Petaluma, Ventura, Elk Grove, Rocklin, Grass Valley, and El Cerrito. In most of the burglaries, thieves used a vehicle as a battering ram to break into the gun store. Several of the stores left the guns in their glass display cases, making them easily accessible to the robbers. Similar smash and grab firearm thefts have occurred more recently in Loomis, Fairfield, Stockton, and Dixon.
Across the nation, ATF data shows that gun story robberies are becoming an increasing occurrence. Burglaries of gun stores have increased by over 70 percent since 2013. The number of firearms stolen during burglaries has also increased by over 130%, from 3,355 in 2013 to 7,841 in 2017.
SB 220 implements best practices for storing guns when a gun store is closed for business.
The bill strengthen gun dealer security standers, but also takes into consideration the impact on these businesses by providing several options for compliance.
- Governor’s Veto: This bill is identical to SB 464 (Hill) of the 2017-18 Legislative Session which was vetoed by the Governor. In his veto message, Governor Brown stated, “This bill would require additional security enhancements on the premises of all licensed firearms dealers in California.
“State law already requires that firearms dealers enact security measures to avoid theft. Local jurisdictions can-and have- gone further by adding additional specific requirements. I believe local authorities are in the best position to determine what, of any additional measures are needed in their jurisdiction.”
- Firearms Dealers Thefts: There have been a number of firearms stolen from gun stores throughout California—many of these thefts are perpetrated by the offender driving a car through the front window of a firearm retailer to gain access to the store. For example:
When five juveniles used an SUV as a battering ram to slam through the front window and metal security gate of the Rocklin Armory gun shop on an early July morning, Walter Ford’s ultra-high-definition security cameras captured the entire incident in near perfect clarity.
The burglars stream into the store and begin searching for the cache of weapons they expect to find. One disappears from view, then reappears carrying a rifle and runs out of the store. The other four, though, can’t find any weapons to steal. They quickly check the shelves, find nothing and run back through the smashed entrance. The entire incident takes less than two minutes.
The brazen burglary was one of five Sacramento-area gun store thefts in less than three months this year. In all, more than 200 guns were stolen, but only one came from the Rocklin Armory.
That’s because Ford, one of the store’s two owners, takes precautions. Guns are high-value items, especially to criminals, and Ford knows he’s a target. Each night before closing, Ford locks up every gun in a safe. The one rifle he lost was left out because it was being worked on for a customer. But not every gun store takes those steps. Just two months earlier, a nearby gun store lost more than 100 guns in a single burglary. None of it was captured by surveillance cameras.
“I’m a responsible gun owner,” Ford said. “My guns at home, even though I live alone with no kids, they’re locked up. The ammo’s kept separate. There’s no reason I shouldn’t do the same here.”
The next morning, the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives was on the case. Graham Barlow, ATF special agent in charge of the agency’s Sacramento field office, said gun shops are increasingly becoming targets of criminals. For some gangs, gun theft has even become a specialty.
“They have a very unique way of doing it,” Barlow said. “That’s their business. Gun stores.”
The number of guns stolen from gun shops in California nearly doubled between 2013 and 2015. Last year, more than 400 guns were reported stolen from California gun stores, according to ATF data. And those are just a fraction of all guns stolen in California.
According to data from the California Department of Justice Bureau of Firearms, more than 70,000 guns were reported lost or stolen by gun owners in the past five years. A joint investigation by NBC stations across California found at least 4,000 of those lost or stolen guns were later seized by police in connection to crimes.
The national numbers are even more troubling. In the past 10 years, more than 2 million guns have been reported stolen in the United States, according to data from the Federal Bureau of Investigation.[1]
- Argument in Support: According to California Brady United Against Gun Violence, “California’s strong gun laws are helping to keep firearms out of dangerous hands and are saving lives. Our state’s firearm mortality rate has decreased 55% since the high in 1993 – almost four times the decrease in the rest of the nation. Illegal guns, however, continue to be a big problem that threatens public safety. Many illegal guns originate as stolen guns, which fuel the black market and are often used in crime. Firearms stolen in bulk from licensed firearm dealers (FFLs) exacerbates this problem and, unfortunately, is happening more frequently. According to the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), 9,281 firearms were reported stolen by FFLs in 2016. Of these, 7,488 were stolen during burglaries, whereby there was an unlawful entry to commit a theft. In California alone, 479 firearms were stolen during FFL burglaries in 2016. It is alarming that the number of firearms stolen this way has increased 72.53% since 2012. Moreover, media reports show that in a series of recent FFL burglaries in California, the thieves used vehicles to ram and smash into the gun stores. This so-called “crash and grab” needs to be prevented.
“Senate Bill 220 will help prevent “crash and grab” and other FFL burglaries by expanding the requirements for securely storing firearms when the FFL is not open for business. Under existing law, all inventory firearms must be stored in the licensed location when the FFL is closed. Existing law requires only one of three security options, which has proven to be insufficient. SB 220 tightens security measures by requiring that that the licensed location be a secure facility with steel bars on the windows, deadbolts or a metal grate on doors, and steel bars, metal grating, or an alarm system to protect A/C vents. SB 220 also require FFLs to choose one of the eight additional security measures listed in the bill. These new requirements will help prevent entry in the first place, or prevent the theft of guns if entry is gained.
“SB 220 provides a range of workable options and the enhanced security measures in the bill impose one-time costs on FFLs that will provide clear public safety benefits. The requirements in SB 220 are best practices that will prevent the theft of firearms from FFLS, many of which have big inventories of guns. Every manufactured gun starts out as a legal gun; once stolen, it becomes an illegal gun in the hands of a criminal. These stolen guns are often sold to other criminals or people who cannot pass a background check, which jeopardizes public safety. Preventing gun theft from FFLs furthers Brady California’s core goal of reducing firearm injury and death by keeping firearms out of dangerous hands.”
- Argument in Opposition: According to the California Rifle and Pistol Association, "Although California already must store and secure firearms. SB 220 would increase the storage and security requirements of all firearms in the inventory of a licensed firearms dealer.
"The CRPA does support making California communities safer and keeping firearms out of the hands of criminals. Unfortunately, this legislation will not accomplish that goal. Instead it is a knee jerk reaction to recent criminal activity involving a very small percentage of businesses. The long list of exemptions will only create confusion and a regulatory nightmare to enforce. Costs and red tape will make compliance by California’s small businesses impossible.
"California law already requires each firearm to be secured by storing the firearm in a secure facility that is a part of, or that constitutes, the firearms dealer’s business premises, and securing the firearm with a steel rod or cable with specified features, or storing the firearm in a locked fireproof safe or vault in the business premises.
"If the firearm dealer’s location is at street level, SB 220 would also require the business to install concrete or hardened steel bollards or other barriers capable of stopping a 5,000-pound vehicle traveling at 30 miles per hour to protect the location’s front entrance, any floor-to-ceiling windows, and any other doors, that could be breached by the vehicle.
"California already places severe security requirements on our firearms dealers, including storing their inventory in a “secure facility” which, as defined, includes numerous security precautions – all of which must be satisfied. SB 220 would impose unnecessary additional security requirements costing tens of thousands of dollars on most firearms dealers. Although some larger firearms dealers may be able to absorb these costs, SB 220 would have a devastating financial impact on most smaller dealers, driving many of them out of business – with the greatest impact felt in rural areas."
REGISTERED SUPPORT / OPPOSITION:
Support
Bay Area Student Activists
Brady California United Against Gun Violence
Giffords Law Center to Prevent Gun Violence
Youth ALIVE!
Oppose
Cal-Ore Wetlands and Waterfowl Council
California Bowmen Hunters/State Archery Association
California Chapter Wild Sheep Foundation
California Deer Association
California Houndsmen for Conservation
California Rifle and Pistol Association, Inc.
California Sportsman's Lobby, Inc.
California State Chapter - National Wild Turkey Federation
California Waterfowl Association
Congressional Sportsmen's Foundation
Crossroads of the West Gun Shows
National Rifle Association
National Shooting Sports Foundation, Inc.
Outdoor Sportsmen's Coalition of California
Rocky Mountain Elk Foundation
Safari Club International - California Chapters
San Diego County Wildlife Federation
San Francisco Bay Area Chapter - Safari Club International
The Black Brant Group
Tulare Basin Wetlands Association
Analysis Prepared by: Gregory Pagan / PUB. S. / (916) 319-3744
(Gun Stores in Northern California Getting Hit Harder by Thieves, http://www.nbcbayarea.com/news/local/Gun-Stores-in-Northern-California-Getting-Hit-Harder-by-Thieves-399573081.html#ixzz4aandO02M.) ↑
Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | SB 220 |
THIRD READING
Bill No: SB 220
Introduced: 2/7/19
SENATE PUBLIC SAFETY COMMITTEE: 5-2, 4/2/19
AYES: Skinner, Bradford, Jackson, Mitchell, Wiener
NOES: Moorlach, Morrell
SENATE APPROPRIATIONS COMMITTEE: Senate Rule 28.8
SUBJECT: Firearms dealers: storage and security
DIGEST:
This bill strengthens the storage requirements placed on firearms retailers, as specified.
Existing law:
- Requires the business of a firearms licensee be conducted only in the buildings designated in the license, except for: (Penal Code § 26805.)
- A licensed firearms dealer may take possession of firearms and commence preparation of registers for the sale, delivery, or transfer of firearms at any gun show or event, or its successor, if the gun show or event is not conducted from any motorized or towed vehicle. A person conducting business pursuant to this subdivision shall be entitled to conduct business as authorized herein at any gun show or event in the state, without regard to the jurisdiction within this state that issued the license, provided the person complies with all applicable laws, including, but not limited to, the waiting period, and all applicable local laws, regulations, and fees, if any. A person conducting business pursuant to this subdivision shall publicly display the person s license, or a facsimile thereof, at any gun show or event, as specified in this subdivision.
- A licensed firearms dealer may engage in the sale and transfer of firearms other than handguns at specified events. A licensed firearms dealer may also accept delivery of firearms other than handguns, outside the building designated in the license, provided the firearm is being donated for the purpose of sale or transfer at an auction or similar event, as specified.
- Requires, except as otherwise provided, that any time when the licensee is not open for business, all inventory firearms must be stored in the licensed location. All firearms must be secured using one of the following methods as to each particular firearm: (Penal Code § 26890(a) [emphasis added].)
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensees business premises.
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a boltcutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Store the firearm in a locked fireproof safe or vault in the licensee s business premises.
- States that the licensing authority in an unincorporated area of a county or within a city may impose security requirements that are more strict or are at a higher standard than those specified. (Penal Code § 26890(b).)
- States that upon written request from a licensee, the licensing authority may grant an exemption from compliance with the requirements storage requirements if the licensee is unable to comply with those requirements because of local ordinances, covenants, lease conditions, or similar circumstances not under the control of the licensee. (Penal Code § 26890(c).)
- Provides that specified storage requirements do not apply to a licensee organized as a nonprofit public benefit corporation, if both of the following conditions are satisfied: (Penal Code § 26890(d).)
- The nonprofit public benefit or mutual benefit corporation obtained the dealer s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation.
- The firearms are not handguns.
- Provides a “secure facility” means that the facility satisfies all of the following: (Penal Code § 29141.)
- The facility is equipped with a burglar alarm with central monitoring.
- All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
- All perimeter doorways are designed in one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock.
- A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half inch diameter or metal grating of at least nine-gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee's premises independent of the door and doorframe.
- Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
- Hinges and hasps installed so that they cannot be removed when the doors are closed and locked.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- No perimeter metal grates are capable of being entered by any person.
- Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
- Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
- Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
- Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
This bill:
- Provides, after July 1, 2020, firearms at firearms dealers must be stored in the following manner:
- Except as provided, any time when the licensee is not open for business, each particular firearm shall be secured by storing the firearm in a secure facility that is part of, or that constitutes, the licensee’s business premises.
- All firearms shall also be secured using one of the following methods as to each particular firearm, unless the licensee complies with the installation of a rolling locking still door (as provided within the provisions of this bill):
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter, and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Store the firearm in a locked fireproof safe or vault in the licensee’s business premises. The safe shall meet the safety standards established by the Attorney General.
- Store the firearm in a display case that is made with a steel frame that is no thinner than 12-gauge, is fitted with a hardened steel lock where the case opens to access the firearm, and that complies with one of the following:
- The display case is fitted with smash-proof polycarbonate panels that are at least one-quarter inch thick.
- The display case is fitted with glass that is protected with a security or protective laminate film that is specifically designed to delay entry and unauthorized access, with a minimum thickness of at least eight mils (eight-thousandths of an inch), and that includes an anchoring system on all seams of each glass panel and is also anchored to the frame.
- Store the firearm in a windowless room equipped with a steel security door fitted with a deadbolt lock, and that does not have a door exposed to the outside of the building.
- Store the firearm behind a steel roll-down door or security gate, or secure the firearm in a locked steel gun rack by use of a hardened steel bar.
- If the licensee’s location is at street level, the licensee shall install, or cause to be installed, concrete or hardened steel bollards, or other barriers, such as security planters or other devices with a similar structural integrity of bollards, to protect the location’s front entrance, any floor-to-ceiling windows, and any other doors, that could be breached by a vehicle. The bollards shall meet the following requirements:
- Be no less than four inches in diameter and 36 inches in height from the ground.
- Be spaced so as not to obstruct accessible routes or accessible means of egress, and have a clear width of not less than 36 inches but no more than 60 inches.
- Be capable of stopping a 5,000 pound vehicle traveling at 30 miles per hour, in compliance with ASTM International Standard Test Method F3016.
- Bollards installed prior to September 1, 2017, shall be considered compliant with this bill if they are composed of concrete or hardened steel, do not obstruct accessible routes or accessible means of egress in compliance with Standard 206.8 of Chapter 2 of the federal Americans with Disabilities Act of 1990 (42 U.S.C. Sec. 12101 et seq.), and have a clear width of not less than 36 inches but no more than 60 inches.
- Provides that unless the licensee chooses not to comply with the above provisions, the licensee shall install locking steel roll-down doors on any perimeter doors and floor-to-ceiling windows. Emergency exits are exempt from this requirement where installation would be in violation of a state or local fire code.
- Specifies that the licensing authority in an unincorporated area of a county or within a city may impose security requirements that are more strict or are at a higher standard than those specified.
- Provides that upon written request from a licensee, the licensing authority may grant an exemption from compliance with the requirements if the licensee is unable to comply with those requirements because of local ordinances, covenants, lease conditions, or similar circumstances not under the control of the licensee shall not apply to a licensee organized as a nonprofit public benefit corporation if both of the following conditions are satisfied
- The nonprofit public benefit or mutual benefit corporation obtained the dealer’s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation.
- The firearms are not handguns.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: No
Bay Area Student Activists
Brady California United Against Gun Violence
Giffords Law Center to Prevent Gun Violence
OPPOSITION: (Verified 4/22/19)
California Rifle and Pistol Association
California Sportsman’s Lobby
Crossroads of the West Gun Shows
Gun Owners of California
National Shooting Sports Foundation
Outdoor Sportsmen’s Coalition of California
PWG San Diego
Safari Club International
Safari Club International Foundation
ARGUMENTS IN SUPPORT: According to the Giffords Law Center to Prevent Gun Violence:
Giffords Law Center to Prevent Gun Violence supports strengthening California’s gun dealer security standards to more effectively deter and prevent firearm thefts. We believe SB 220 would meaningfully improve public safety while also taking into consideration the impact on gun dealers' business practices by allowing them several options for compliance. Now led by former Congresswoman and gun violence survivor, Gabby Giffords, Giffords Law Center provides legal and technical assistance in support of gun violence prevention to federal, state, and local legislators nationwide.
Gun dealers are a high-value target for criminals, and have often been magnets for break-ins, theft, and destruction of property. In 2017, ATF issued a report demonstrating that between
2015 and 2016, gun thefts from California federally licensed dealers increased by a staggering 173.8%. An increasing number of these incidents have been so-called “smash-and grab” robberies, where perpetrators drive their car into a gun store’s doors, front windows, or gates to gain entry.
ARGUMENTS IN OPPOSITION: According to the California Rifle and Pistol Association (CRPA):
Although California already has some of the strictest laws in the country regarding how dealers must store and secure firearms. SB 220 would increase the storage and security requirements of all firearms in the inventory of a licensed firearms dealer.
The CRPA does support making California communities safer and keeping firearms out of the hands of criminals. Unfortunately, this legislation will not accomplish that goal. Instead it is a knee jerk reaction to recent criminal activity involving a very small percentage of businesses. The long list of exemptions will only create confusion and a regulatory nightmare to enforce. Costs and red tape will make compliance by California’s small businesses impossible.
California law already requires each firearm to be secured by storing the firearm in a secure facility that is a part of, or that constitutes, the firearms dealer’s business premises, and securing the firearm with a steel rod or cable with specified features, or storing the firearm in a locked fireproof safe or vault in the business premises.
Prepared by: Gabe Caswell / PUB. S. /
4/24/19 15:15:15
**** END ****
SENATE COMMITTEE ON PUBLIC SAFETY
Senator Nancy Skinner, Chair
2019 - 2020 Regular
Bill No: SB 220 Hearing Date: April 2, 2019
Author: | Hill | ||
Version: | February 7, 2019 | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | GC | ||
Subject: Firearms Dealers: Storage and Security
HISTORY
Source: Author
Prior Legislation: SB 464 (Hill) Vetoed, 2017
Support: Bay Area Student Activists; Brady California United Against Gun Violence; Giffords Law Center to Prevent Gun Violence
Opposition: California Rifle and Pistol Association; California Sportsman’s Lobby; Crossroads of the West Gun Shows; National Shooting Sports Foundation; Outdoor Sportsmen’s Coalition of California; Safari Club International; Safari Club International Foundation
PURPOSE
The purpose of this legislation is to strengthen the storage requirements placed on firearms retailers, as specified.
Existing law requires the business of a firearms licensee be conducted only in the buildings designated in the license, except for: (Penal Code § 26805.)
- A licensed firearms dealer may take possession of firearms and commence preparation of registers for the sale, delivery, or transfer of firearms at any gun show or event, or its successor, if the gun show or event is not conducted from any motorized or towed vehicle. A person conducting business pursuant to this subdivision shall be entitled to conduct business as authorized herein at any gun show or event in the state, without regard to the jurisdiction within this state that issued the license, provided the person complies with all applicable laws, including, but not limited to, the waiting period, and all applicable local laws, regulations, and fees, if any. A person conducting business pursuant to this subdivision shall publicly display the person s license, or a facsimile thereof, at any gun show or event, as specified in this subdivision.
- A licensed firearms dealer may engage in the sale and transfer of firearms other than handguns at specified events. A licensed firearms dealer may also accept delivery of firearms other than handguns, outside the building designated in the license, provided the firearm is being donated for the purpose of sale or transfer at an auction or similar event, as specified.
Existing law, except as otherwise provided, requires that any time when the licensee is not open for business, all inventory firearms must be stored in the licensed location. All firearms must be secured using one of the following methods as to each particular firearm: (Penal Code §26890(a) [emphasis added].)
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensees business premises.
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a boltcutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Store the firearm in a locked fireproof safe or vault in the licensee s business premises.
Existing law states that the licensing authority in an unincorporated area of a county or within a city may impose security requirements that are more strict or are at a higher standard than those specified. (Penal Code §26890(b).)
Existing law states that upon written request from a licensee, the licensing authority may grant an exemption from compliance with the requirements storage requirements if the licensee is unable to comply with those requirements because of local ordinances, covenants, lease conditions, or similar circumstances not under the control of the licensee. (Penal Code §26890(c).)
Existing law provides that specified storage requirements do not apply to a licensee organized as a nonprofit public benefit corporation, if both of the following conditions are satisfied: (Penal Code §26890(d).)
- The nonprofit public benefit or mutual benefit corporation obtained the dealer s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation.
- The firearms are not handguns.
Existing law provides a “secure facility” means that the facility satisfies all of the following: (Penal Code § 29141.)
- The facility is equiped with a burglar alarm with central monitoring.
- All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
- All perimeter doorways are designed in one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock.
- A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee's premises independent of the door and doorframe.
- Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
- Hinges and hasps installed so that they cannot be removed when the doors are closed and locked.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- No perimeter metal grates are capable of being entered by any person.
- Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
- Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
- Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
- Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
This bill provides, after July 1, 2020, firearms at firearms dealers must be stored in the following manner:
- Except as provided, any time when the licensee is not open for business, each particular firearm shall be secured by storing the firearm in a secure facility that is part of, or that constitutes, the licensee’s business premises.
- All firearms shall also be secured using one of the following methods as to each particular firearm, unless the licensee complies with the installation of a rolling locking still door (as provided within the provisions of this bill):
Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter, and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
Store the firearm in a locked fireproof safe or vault in the licensee’s business premises. The safe shall meet the safety standards established by the Attorney General.
Store the firearm in a display case that is made with a steel frame that is no thinner than 12 gauge, is fitted with a hardened steel lock where the case opens to access the firearm, and that complies with one of the following:
The display case is fitted with smash-proof polycarbonate panels that are at least one-quarter inch thick.
The display case is fitted with glass that is protected with a security or protective laminate film that is specifically designed to delay entry and unauthorized access, with a minimum thickness of at least 8 mils (eight-thousandths of an inch), and that includes an anchoring system on all seams of each glass panel and is also anchored to the frame.
Store the firearm in a windowless room equipped with a steel security door fitted with a deadbolt lock, and that does not have a door exposed to the outside of the building.
Store the firearm behind a steel roll-down door or security gate, or secure the firearm in a locked steel gun rack by use of a hardened steel bar.
If the licensee’s location is at street level, the licensee shall install, or cause to be installed, concrete or hardened steel bollards, or other barriers, such as security planters or other devices with a similar structural integrity of bollards, to protect the location’s front entrance, any floor-to-ceiling windows, and any other doors, that could be breached by a vehicle. The bollards shall meet the following requirements:
Be no less than 4 inches in diameter and 36 inches in height from the ground.
Be spaced so as not to obstruct accessible routes or accessible means of egress, and have a clear width of not less than 36 inches but no more than 60 inches.
Be capable of stopping a 5,000 pound vehicle traveling at 30 miles per hour, in compliance with ASTM International Standard Test Method F3016.
Bollards installed prior to September 1, 2017, shall be considered compliant with this section if they are composed of concrete or hardened steel, do not obstruct accessible routes or accessible means of egress in compliance with Standard 206.8 of Chapter 2 of the federal Americans with Disabilities Act of 1990 (42 U.S.C. Sec. 12101 et seq.), and have a clear width of not less than 36 inches but no more than 60 inches.
This bill provides that unless the licensee chooses not to comply with the above provisions, the licensee shall install locking steel roll-down doors on any perimeter doors and floor-to-ceiling windows. Emergency exits are exempt from this requirement where installation would be in violation of a state or local fire code.
This bill specifies that the licensing authority in an unincorporated area of a county or within a city may impose security requirements that are more strict or are at a higher standard than those specified.
This bill provides that upon written request from a licensee, the licensing authority may grant an exemption from compliance with the requirements if the licensee is unable to comply with those requirements because of local ordinances, covenants, lease conditions, or similar circumstances not under the control of the licensee shall not apply to a licensee organized as a nonprofit public benefit corporation if both of the following conditions are satisfied:
The nonprofit public benefit or mutual benefit corporation obtained the dealer’s license solely and exclusively to assist that corporation or local chapters of that corporation in conducting auctions or similar events at which firearms are auctioned off to fund the activities of that corporation or the local chapters of the corporation.
The firearms are not handguns.
COMMENTS
1. Need for This Bill
According to the author:
Guns are stolen from gun stores due to a lack of adequate security. In some cases, guns are left in their display cases without suitable locking mechanisms, making them easy targets for burglars.
In a series of robberies during 2016, hundreds of guns were stolen from guns stores in the cities of San Carlos, Folsom, Sunnyvale, Ceres, Petaluma, Ventura, Elk Grove, Rocklin, Grass Valley, and El Cerrito. In most of the burglaries, thieves used a vehicle as a battering ram to break into the gun store. Several of the stores left the guns in their glass display cases, making them easily accessible to the robbers. Similar smash and grab firearm thefts have occurred more recently in Loomis, Fairfield, Stockton, and Dixon.
Data from the federal Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) show that between 2012 and 2017 over 1,600 guns were reported as stolen from federally licensed gun dealers in the state.
Across the nation, ATF data shows that gun story robberies are becoming an increasing occurrence. Burglaries of gun stores have increased by over 70 percent since 2013. The number of firearms stolen during burglaries has also increased by over 130%, from 3,355 in 2013 to 7,841 in 2017.
Stolen guns often make their way into the hands of criminals. As an example, according to an NBC Bay Area report, which analyzed 70,000 lost or stolen guns between 2010 and 2015, 2,655 of the guns were connected to a crime.
Further, stolen guns are unlikely to be found or recovered. According to a federal Department of Justice analysis of firearms stolen during household burglaries, no more than 20% are recovered within 6 months of being stolen.
Law enforcement agencies are hard at work to catch gun thieves. In 2016, the US Attorney for the Central District of California announced that a man plead guilty to stealing over 100 guns from gun stores. On February 13, 2017, it was revealed that federal authorities in the Bay Area had apprehended a group of eight men who were purportedly stealing guns from Northern California stores and selling them. But while law enforcement agencies are diligently working to recover stolen guns, the Legislature can and should act to prevent the thefts in the first place.
2. Gun Store Thefts
There have been a number of firearms stolen from gun stores throughout California—many of these thefts are perpetrated by the offender driving a car through the front window of a firearm retailer to gain access to the store. For example,
When five juveniles used an SUV as a battering ram to slam through the front window and metal security gate of the Rocklin Armory gun shop on an early July morning, Walter Ford’s ultra-high-definition security cameras captured the entire incident in near perfect clarity.
The burglars stream into the store and begin searching for the cache of weapons they expect to find. One disappears from view, then reappears carrying a rifle and runs out of the store. The other four, though, can’t find any weapons to steal. They quickly check the shelves, find nothing and run back through the smashed entrance. The entire incident takes less than two minutes.
The brazen burglary was one of five Sacramento-area gun store thefts in less than three months this year. In all, more than 200 guns were stolen, but only one came from the Rocklin Armory.
That’s because Ford, one of the store’s two owners, takes precautions. Guns are high-value items, especially to criminals, and Ford knows he’s a target. Each night before closing, Ford locks up every gun in a safe. The one rifle he lost was left out because it was being worked on for a customer. But not every gun store takes those steps. Just two months earlier, a nearby gun store lost more than 100 guns in a single burglary. None of it was captured by surveillance cameras.
“I’m a responsible gun owner,” Ford said. “My guns at home, even though I live alone with no kids, they’re locked up. The ammo’s kept separate. There’s no reason I shouldn’t do the same here.”
The next morning, the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives was on the case. Graham Barlow, ATF special agent in charge of the agency’s Sacramento field office, said gun shops are increasingly becoming targets of criminals. For some gangs, gun theft has even become a specialty.
“They have a very unique way of doing it,” Barlow said. “That’s their business. Gun stores.”
The number of guns stolen from gun shops in California nearly doubled between 2013 and 2015. Last year, more than 400 guns were reported stolen from California gun stores, according to ATF data. And those are just a fraction of all guns stolen in California.
According to data from the California Department of Justice Bureau of Firearms, more than 70,000 guns were reported lost or stolen by gun owners in the past five years. A joint investigation by NBC stations across California found at least 4,000 of those lost or stolen guns were later seized by police in connection to crimes.
The national numbers are even more troubling. In the past 10 years, more than 2 million guns have been reported stolen in the United States, according to data from the Federal Bureau of Investigation.[1]
3. Current Firearm Storage Requirements
Gun stores are currently allowed to store their inventory of firearms one of three ways:
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensee's business premises.
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a boltcutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Store the firearm in a locked fireproof safe or vault in the licensee's business premises.
This legislation goes further and requires that firearms retailers either install locking steel roll-down doors on any perimeter doors and floor-to-ceiling windows, or comply with stringent storage requirements mandating the use of steel rods, steel bollards, fireproof safes, and stringent display case requirements.
4. Veto Message for SB 464 (Hill), 2017
Governor Brown vetoed a substantially similar bill in 2017 with the following veto message:
This bill would require additional security enhancements on the premises of all licensed firearms dealers in California.
State law already requires that firearms dealers enact security measures to avoid theft. Local jurisdictions can-and have-gone further by adding additional specific requirements. I believe local authorities are in the best position to determine what, if any additional measures are needed in their jurisdictions.
5. Argument in Support
According to the Giffords Law Center to Prevent Gun Violence:
Giffords Law Center to Prevent Gun Violence supports strengthening California’s gun dealer security standards to more effectively deter and prevent firearm thefts. We believe SB 220 would meaningfully improve public safety while also taking into consideration the impact on gun dealers' business practices by allowing them several options for compliance. Now led by former Congresswoman and gun violence survivor, Gabby Giffords, Giffords Law Center provides legal and technical assistance in support of gun violence prevention to federal, state, and local legislators nationwide.
Gun dealers are a high-value target for criminals, and have often been magnets for break-ins, theft, and destruction of property. In 2017, ATF issued a report demonstrating that between
2015 and 2016, gun thefts from California federally licensed dealers increased by a staggering 173.8%. An increasing number of these incidents have been so-called “smash-and grab” robberies, where perpetrators drive their car into a gun store’s doors, front windows, or gates to gain entry. A sampling of these incidents from 2016 includes:
- 18 handguns stolen from Independence Armory in Petaluma, CA. March, 2016.
- Handguns and rifles stolen from Red Seal Arms Guns and Ammo in Ventura, CA. March, 2016.
- 107 guns stolen from Nor Cal Gun Vault, Rocklin, CA. May, 2016.
- Attempted smash-and-grab robberies from Laguna Guns and Accessories and CS Tactical/MTG Firearms in Elk Grove, CA. No guns stolen. May, 2016.
- 30 handguns stolen from American Firearms in Fresno, CA. June, 2016.
- Rifle stolen from Rocklin Armory in Rocklin, CA. July, 2016.
- More than 15 guns stolen from STS Guns in Folsom, CA. July, 2016.
- Approximately 20 handguns stolen from Mustang Firearms, Grass Valley, CA. August, 2016. At least 12 similar incidents have taken place in the greater Sacramento area in the six months prior, resulting in between 230 and 240 stolen firearms.
Existing California law provides some minimum standards regarding how dealers may secure their firearms inventory when they are not open for business. Currently, dealers with a firearms inventory may choose between one of three options. They may:
- Store their firearms in “a secure facility” (defined as a building that meets certain specifications, including certain types of locks on doors; steel bars on windows; and bars, grating, or an alarm system on other openings);
- Store their firearms in locked safes or vaults within the dealer’s premises; or
- Secure their firearms with a hardened steel rod or cable through the trigger guard of each firearm, as specified.
These current security standards have proven insufficient to guard against thefts, especially repeated “smash-and-grab” incidents involving the theft of hundreds of lethal weapons.
At least 34 local jurisdictions in California—including Oakland, Santa Ana, San Diego, San Jose, and Los Angeles County—have adopted ordinances requiring firearm dealers to meet additional site security and safe storage standards. Consistent with Giffords Law Center’s model gun dealer ordinance, some California jurisdictions require dealers to store their firearms in a “secure facility,” as defined by state law, and to either store their firearms in locked safes or vaults, or with a hardened steel rod or cable.
SB 220 (Hill) would incorporate this measure at the state level, requiring licensed gun dealers to store their firearms in a “secure facility” and also utilize one of several other options of securing their firearms including keeping them in locked safes or vaults, with hardened steel rods or cables, or behind locking steel roll-down doors. If a dealer secures their firearms with anchored steel rods or cables, SB 220 would additionally require the dealer to install barriers to protect the location’s front entrance, floor-to-ceiling windows, and any other doors that could be breached by a vehicle. Importantly, local licensing authorities are still authorized to exempt dealers who are unable to comply with this and other requirements due to local ordinances or conditions outside their control. ATF recommends that gun dealers incorporate these and other loss prevention measures, such as security cameras and alarm systems, to help reduce the number of firearms stolen from their inventory.
SB 220 (Hill) enacts modest, commonsense security measures already employed by responsible dealers. Moreover, they are reasonably calculated to prevent the thefts that supply the criminal marketplace with guns. Accordingly, we urge you to sign this important legislation.
6. Argument in Opposition
According to the California Rifle and Pistol Association:
Although California already has some of the strictest laws in the country regarding how dealers must store and secure firearms. SB 220 would increase the storage and security requirements of all firearms in the inventory of a licensed firearms dealer.
The CRPA does support making California communities safer and keeping firearms out of the hands of criminals. Unfortunately, this legislation will not accomplish that goal. Instead it is a knee jerk reaction to recent criminal activity involving a very small percentage of businesses. The long list of exemptions will only create confusion and a regulatory nightmare to enforce. Costs and red tape will make compliance by California’s small businesses impossible.
California law already requires each firearm to be secured by storing the firearm in a secure facility that is a part of, or that constitutes, the firearms dealer’s business premises, and securing the firearm with a steel rod or cable with specified features, or storing the firearm in a locked fireproof safe or vault in the business premises.
If the firearm dealer’s location is at street level, SB 220 would also require the business to install concrete or hardened steel bollards or other barriers capable of stopping a 5,000-pound vehicle traveling at 30 miles per hour to protect the location’s front entrance, any floor-to-ceiling windows, and any other doors, that could be breached by the vehicle.
California already places severe security requirements on our firearms dealers, including storing their inventory in a “secure facility” which, as defined, includes numerous security precautions – all of which must be satisfied. SB 220 would impose unnecessary additional security requirements costing tens of thousands of dollars on most firearms dealers. Although some larger firearms dealers may be able to absorb these costs, SB 220 would have a devastating financial impact on most smaller dealers, driving many of them out of business – with the greatest impact felt in rural areas.
Senator Hill authored similar legislation, SB 464, in 2017. That bill was passed by the State Legislature but vetoed by Governor Brown. In his veto message on SB 464, Governor Brown stated “This bill would require additional security enhancements on the premises of all licensed firearms dealers in California. State law already requires that firearms dealers enact security measures to avoid theft. Local jurisdictions can-and have-gone further by adding additional specific requirements. I believe local authorities are in the best position to determine what, if any additional measures are needed in their jurisdiction”
-- END –
(Gun Stores in Northern California Getting Hit Harder by Thieves, http://www.nbcbayarea.com/news/local/Gun-Stores-in-Northern-California-Getting-Hit-Harder-by-Thieves-399573081.html#ixzz4aandO02M.) ↑
Bill Author
Bill Co-Author(s):