AB 847: Electrically conductive balloons.
- Session Year: 2021-2022
- House: Assembly
- Latest Version Date: 2022-09-18
Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning consumers about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with lighter-than-air gas, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would require a person, as defined, who manufactures a foil balloon to permanently mark the balloon with additional specified information, including the dangers of releasing foil balloons that may come into contact with overhead power lines and that the balloon is in compliance with the provisions of this bill, as specified. The bill would define a foil balloon to mean a balloon that is constructed of electrically conductive material.
This bill would require a person who sells, offers for sale, or manufactures for sale any foil balloon to ensure that those foil balloons are manufactured to meet certain requirements, including passing a standard test that is approved by the Institute of Electrical and Electronics Engineers. The bill would require foil balloons to become compliant with that requirement pursuant to a prescribed phase-in period. The bill, following completion of the phase-in period, would prohibit a person from selling, offering for sale, or manufacturing for sale, a foil balloon, unless the balloon complies with these provisions. The bill would toll specified dates and time periods when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs.
This bill would define various terms for these purposes.
This bill would make a person who violates, or who attempts to violate, these provisions subject to liability for injunction and a civil penalty of $50 per noncompliant balloon, not to exceed $2,500 per day for a totality of violations. The bill would authorize the penalty to be assessed and recovered in a civil action brought in any court of competent jurisdiction by the Attorney General or local officials, as specified. The bill would require the civil penalties to be collected and retained by the office that brought the action.
Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning consumers about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with lighter-than-air gas, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would require a person, as defined, who manufactures a foil balloon to permanently mark the balloon with additional specified information, including the dangers of releasing foil balloons that may come into contact with overhead power lines and that the balloon is in compliance with the provisions of this bill, as specified. The bill would define a foil balloon to mean a balloon that is constructed of electrically conductive material.
This bill would require a person who sells, offers for sale, or manufactures for sale any foil balloon to ensure that those foil balloons are manufactured to meet certain requirements, including passing a standard test that is approved by the Institute of Electrical and Electronics Engineers. The bill would require foil balloons to become compliant with that requirement pursuant to a prescribed phase-in period. The bill, following completion of the phase-in period, would prohibit a person from selling, offering for sale, or manufacturing for sale, a foil balloon, unless the balloon complies with these provisions. The bill would toll specified dates and time periods when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs.
This bill would define various terms for these purposes.
This bill would make a person who violates, or who attempts to violate, these provisions subject to liability for injunction and a civil penalty of $50 per noncompliant balloon, not to exceed $2,500 per day for a totality of violations. The bill would authorize the penalty to be assessed and recovered in a civil action brought in any court of competent jurisdiction by the Attorney General or local officials, as specified. The bill would require the civil penalties to be collected and retained by the office that brought the action.
Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning consumers about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with lighter-than-air gas, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would require a person, as defined, who manufactures a foil balloon to permanently mark the balloon with additional specified information, including the dangers of releasing foil balloons that may come into contact with overhead power lines and that the balloon is in compliance with the provisions of this bill. bill, as specified. The bill would define a foil balloon to mean a balloon that is constructed of electrically conductive material and filled with lighter-than-air gas. material.
This bill would require a person who sells, offers for sale, or manufactures for sale any foil balloon to ensure that those foil balloons pass a standard test, are manufactured to meet certain requirements, including passing a standard test that is approved by the Institute of Electrical and Electronics Engineers (IEEE) standard test, once it is approved, that is performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels. Engineers. The bill would require foil balloons to become compliant with the provisions of this bill according to a phase-in period, as specified. that requirement pursuant to a prescribed phase-in period. The bill, following completion of the phase-in period, would prohibit a person from selling, offering for sale, or manufacturing for sale, a foil balloon, unless the balloon complies with these provisions. The bill would toll specified dates and time periods when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs.
This bill would define various terms for these purposes.
This bill would make a person who violates, or who threatens attempts to violate, these provisions subject to liability for injunction and a civil penalty of $50 per noncompliant balloon, not to exceed $2,500 per day. day for a totality of violations. The bill would authorize the penalty to be assessed and recovered in a civil action brought in any court of competent jurisdiction by the Attorney General or local officials, as specified. The bill would require the civil penalties to be collected and retained by the office that brought the action.
Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning consumers about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with lighter-than-air gas, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would make these provisions inoperative on September 1, 2026, and would repeal them on January 1, 2027.(2)Existing law establishes the Office of Energy Infrastructure Safety to ensure that the operations of energy and communication infrastructure within the state will be adequately managed, and establishes the Office of Emergency Services in the office of the Governor, which is responsible for the states emergency and disaster response services for natural, technological, or manmade disasters and emergencies.This bill would require, on or before September 1, 2024, or upon the issuance of a final standard, as approved by the Institute of Electrical and Electronics Engineers, whichever is later, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, to adopt regulations governing the sale or manufacture of celebratory balloons constructed of electrically conductive material and filled with lighter-than-air gas. The bill would require the regulations to ensure, among other things, that the balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels.This bill would provide that a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material is required to permanently mark the balloon with specified information, including the dangers of releasing balloons which may contact overhead power lines and the identity of the manufacturer. The bill would also require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material that is filled with lighter-than-air gas to affix an object of sufficient weight to the balloon or its appurtenance, as provided, and prohibits the business from attaching an electrically conductive string, or other object, to the balloon.The bill, on and after September 1, 2026, would prohibit a business from selling or offering for sale, and a manufacturer from manufacturing for sale, a celebratory balloon made of electrically conductive material filled with lighter-than-air gas, unless the balloon complies with these provisions.The bill would make a business or person violating these provisions subject to a civil penalty of $50 for each violation.This bill would require a person, as defined, who manufactures a foil balloon to permanently mark the balloon with additional specified information, including the dangers of releasing foil balloons that may come into contact with overhead power lines and that the balloon is in compliance with the provisions of this bill. The bill would define a foil balloon to mean a balloon that is constructed of electrically conductive material and filled with lighter-than-air gas.
This bill would require a person who sells, offers for sale, or manufactures for sale any foil balloon to ensure that those foil balloons pass a standard test, the Institute of Electrical and Electronics Engineers (IEEE) standard test, once it is approved, that is performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels. The bill would require foil balloons to become compliant with the provisions of this bill according to a phase-in period, as specified. The bill, following completion of the phase-in period, would prohibit a person from selling, offering for sale, or manufacturing for sale, a foil balloon, unless the balloon complies with these provisions.
This bill would define various terms for these purposes.
This bill would make a person who violates, or who threatens to violate, these provisions subject to liability for injunction and a civil penalty of $50 per noncompliant balloon, not to exceed $2,500 per day. The bill would authorize the penalty to be assessed and recovered in a civil action brought in any court of competent jurisdiction by the Attorney General or local officials, as specified. The bill would require the civil penalties to be collected and retained by the office that brought the action.
(1)Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning consumers about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air, filled with lighter-than-air gas, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would make these provisions inoperative on September 1, 2026. 2026, and would repeal them on January 1, 2027.
(2)Existing law establishes the Office of Energy Infrastructure Safety to ensure that the operations of energy and communication infrastructure within the state will be managed adequately, adequately managed, and establishes the Office of Emergency Services in the office of the Governor Governor, which is responsible for the states emergency and disaster response services for natural, technological, or manmade disasters and emergencies.
The bill would require the Office of Energy Infrastructure Safety, on or before September 1, 2024,This bill would require, on or before September 1, 2024, or upon the issuance of a final standard, as approved by the Institute of Electrical and Electronics Engineers, whichever is later, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, to adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air lighter-than-air gas. The bill would require the regulations to do certain things, including requiring that to ensure, among other things, that the balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, as provided. levels.
This bill would require provide that a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material is required to permanently mark the balloon with specified information, including the dangers of releasing balloons which may contact overhead power lines and the identity of the manufacturer. The bill would also require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material that is filled with lighter than air lighter-than-air gas to affix an object of sufficient weight to the balloon or its appurtenance, as provided, and prohibits the business from attaching an electrically conductive string, or other object, to the balloon.
The bill, on and after September 1, 2026, would prohibit a business from selling or offering for sale, and a manufacturer from manufacturing for sale, a celebratory balloon made of electrically conductive material material filled with lighter-than-air gas, unless the balloon complies with these provisions.
The bill would make a business or person violating these provisions subject to a civil penalty of $50 for each violation.
(1)Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would make these provisions inoperative on September 1, 2023. 2026.
(2)Existing law establishes the Office of Energy Infrastructure Safety to ensure that the operations of energy and communication infrastructure within the state will be managed adequately, and establishes the Office of Emergency Services in the office of the Governor which is responsible for the states emergency and disaster response services for natural, technological, or manmade disasters and emergencies.
The bill would require the Office of Energy Infrastructure Safety, on or before September 1, 2024, in consultation with the Office of Emergency Services, to adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The bill would require the regulations to do certain things, including requiring that the balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, as provided.
This bill would require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material to permanently mark the balloon with specified information, including the dangers of releasing balloons which may contact overhead power lines and the identity of the manufacturer. The bill would also require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material that is filled with lighter than air gas to affix an object of sufficient weight to the balloon or its appurtenance, as provided, and prohibits the business from attaching an electrically conductive string, or other object, to the balloon.
The bill, on and after September 1, 2025 2026, would prohibit a business from selling or offering for sale, and a manufacturer from manufacturing for sale, a celebratory balloon made of electrically conductive material unless the balloon complies with these provisions.
The bill would make a business or person violating these provisions subject to a civil penalty of $50 for each violation.
(1)Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would make these provisions inoperative on September 1, 2022. 2023.
(2)Existing law establishes the Office of Energy Infrastructure Safety to ensure that the operations of energy and communication infrastructure within the state will be managed adequately, and establishes the Office of Emergency Services in the office of the Governor which is responsible for the states emergency and disaster response services for natural, technological, or manmade disasters and emergencies.
The bill would require the Office of Energy Infrastructure Safety, on or before September 1, 2022, 2024, in consultation with the Office of Emergency Services, to adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The bill would require the regulations to do certain things, including requiring that the balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, as provided.
This bill would require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material to permanently mark the balloon with specified information, including the dangers of releasing balloons which may contact overhead power lines and the identity of the manufacturer. The bill would also require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material that is filled with lighter than air gas to affix an object of sufficient weight to the balloon or its appurtenance, as provided, and prohibits the business from attaching an electrically conductive string, or other object, to the balloon.
The bill, on and after September 1, 2023, 2025 would prohibit a business from selling or offering for sale, and a manufacturer from manufacturing for sale, a celebratory balloon made of electrically conductive material unless the balloon complies with these provisions.
The bill would make a business or person violating these provisions subject to a civil penalty of $50 for each violation.
(1)Existing law requires a person who manufactures a balloon in this state that is constructed of electrically conductive material to permanently mark each balloon with, among other things, a statement warning about the dangerous risk of fire if the balloon comes in contact with an electrical power line. Existing law also imposes specified requirements on a person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air, including prohibiting the person from attaching the balloon to an electrically conductive object.
This bill would make these provisions inoperative on September 1, 2022.
(2)Existing law establishes the Office of Energy Infrastructure Safety to ensure that the operations of energy and communication infrastructure within the state will be managed adequately, and establishes the Office of Emergency Services in the office of the Governor which is responsible for the states emergency and disaster response services for natural, technological, or manmade disasters and emergencies.
The bill would require the Office of Energy Infrastructure Safety, on or before September 1, 2022, in consultation with the Office of Emergency Services, to adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The bill would require the regulations to do certain things, including requiring that the balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, as provided.
This bill would require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material to permanently mark the balloon with specified information, including the dangers of releasing balloons which may contact overhead power lines and the identity of the manufacturer. The bill would also require a business that sells or manufactures a celebratory balloon that is constructed of electrically conductive material that is filled with lighter than air gas to affix an object of sufficient weight to the balloon or its appurtenance, as provided, and prohibits the business from attaching an electrically conductive string, or other object, to the balloon.
The bill, on and after September 1, 2023, would prohibit a business from selling or offering for sale, and a manufacturer from manufacturing for sale, a celebratory balloon made of electrically conductive material unless the balloon complies with these provisions.
The bill would make a business or person violating these provisions subject to a civil penalty of $50 for each violation.
(a)A person who manufactures a foil balloon in this state shall comply with all of the following:
(1)Permanently mark each foil balloon with a printed statement, written in a legible font size and located in a conspicuous area on the foil balloon, that warns the consumer of at least one of the following:
(A)The dangers of releasing balloons that may come into contact with overhead power lines.
(B)If the foil balloon is manufactured to meet the requirements described in subdivision (d), the consumers responsibilities when disposing of foil balloons.
(2)Permanently mark each foil balloon with the identity of the manufacturer.
(3)Permanently mark each foil balloon that it is in compliance with this section if the foil balloon is manufactured to meet the requirements described in subdivision (d). Markings prescribed under the final standard by the Institute of Electrical and Electronics Engineers (IEEE) shall be considered a suitable mark.
(b)A person who sells or distributes a foil balloon that is filled with lighter-than-air gas in this state shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each foil balloon or its appurtenance to counter the lift capability of the foil balloon.
(2)The person shall not attach the foil balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)A person that sells, offers for sale, or manufactures for sale, in this state, any foil balloon shall ensure that those foil balloons pass a standard test, as determined by an accredited testing facility capable of high-voltage testing.
(1)(A)The standard test shall be the IEEE 2845 standard when that standard is approved by the IEEE.
(B)The standard test shall be approved when the IEEE does all of the following:
(i)Publishes an interim standard.
(ii)Completes its trial of the interim standard.
(iii)Publishes the final approved standard, following materially substantive adjustments, if any, to the interim standard.
(2)This requirement is subject to the following phase-in period:
(A)At least 25 percent of the persons foil balloons shall comply no later than one year from the commencement date.
(B)At least 55 percent of the persons foil balloons shall comply no later than two years from the commencement date.
(C)At least 80 percent of the persons foil balloons shall comply no later than three years from the commencement date.
(D)One hundred percent of the persons foil balloons shall comply no later than four years from the commencement date.
(e)Following the completion of the phase-in period outlined in subdivision (d) and notwithstanding any other law, a person shall not sell, offer for sale, or manufacture for sale, in this state, any foil balloon, unless the balloon complies with this section.
(f)(1)All of the following dates and time periods shall be tolled when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs:
(A)The commencement date.
(B)The phase-in period outlined in paragraph (2) of subdivision (d).
(C)The prohibition against selling, offering for sale, and manufacturing for sale outlined in subdivision (e).
(2)Tolling shall last for a period of 24 months or until the serious development, manufacturing, production, or supply chain issue, or force majeure, is resolved, whichever occurs first.
(3)A serious development, manufacturing, production, or supply chain issue, or force majeure, shall be deemed to have occurred if both of the following are satisfied:
(A)The issue is outside of the control of the business that develops, manufactures, produces, or sells foil balloons.
(B)The issue makes it infeasible to develop, manufacture, produce, or sell foil balloons that otherwise would be subject to the requirement of paragraph (1) of subdivision (a).
(g)For the purposes of this section, the following terms apply:
(1)Commencement date means the date on which the IEEE approves the final standard for testing foil balloons at a level of electric distribution voltages without causing an electrical fault and all of the requirements of subparagraph (B) of paragraph (1) of subdivision (d) are met, or January 1, 2027, whichever is later.
(2)Foil balloon means a balloon that is constructed of electrically conductive material.
(3)Infeasible means incapable of being accomplished in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(4)Phase-in period means the gradual phase in of the restrictions on the sale, offer for sale, and manufacture for sale, in this state, of a foil balloon following the commencement date, as set forth in subdivision (d).
(5)Person means any individual, association, organization, partnership, business trust, limited liability company, corporation, or other entity.
SEC. 2.Section 22942.5 is added to the Business and Professions Code, to read:22942.5.(a)A person who violates or attempts to violate Section 22942 may be enjoined in any court of competent jurisdiction.
(b)(1)A person who has violated Section 22942 is liable for a civil penalty in the amount of fifty dollars ($50) for each foil balloon that was sold, offered for sale, manufactured for sale, or distributed in violation of Section 22942. This civil penalty shall not exceed two thousand five hundred dollars ($2,500) per day for a totality of violations of Section 22942, in addition to any other penalty established by law. This civil penalty may be assessed and recovered in a civil action brought in any court of competent jurisdiction.
(2)In assessing the amount of a civil penalty for a violation of this chapter, the court shall consider all of the following:
(A)The nature and extent of the violation.
(B)The number and severity of the violations.
(C)The economic effect of the penalty on the person who violated Section 22942.
(D)The persons annual revenue in both balloon sales and total sales.
(E)Whether the person who violated Section 22942 took good faith measures to comply with Section 22942 and when these measures were taken.
(F)The deterrent effect that the imposition of the penalty would have on both the person who violated Section 22942 and the regulated community as a whole.
(G)The willfulness of the persons responsible for the violation.
(H)Any other factors that justice may require.
(c)Actions pursuant to this section may be brought by the Attorney General in the name of the people of the state, by a district attorney, by a city attorney, or by a city prosecutor in a city or city and county having a full-time city prosecutor.
(d)Civil penalties collected pursuant to this section shall be paid to the office of the city attorney, city prosecutor, district attorney, or Attorney General, whichever office brought the action.
(a)A person who manufactures a foil balloon in this state shall comply with all of the following:
(1)Permanently mark each foil balloon with a printed statement, written in a legible font size and located in a conspicuous area on the foil balloon, that warns the consumer of at least one of the following:
(A)The dangers of releasing balloons that may come into contact with overhead power lines.
(B)If the foil balloon is manufactured to meet the requirements described in subdivision (d), the consumers responsibilities when disposing of foil balloons.
(2)Permanently mark each foil balloon with the identity of the manufacturer.
(3)Permanently mark each foil balloon that it is in compliance with this section if the foil balloon is manufactured to meet the requirements described in subdivision (d). Markings prescribed under the final standard by the Institute of Electrical and Electronics Engineers (IEEE) shall be considered a suitable mark.
(b)A person who sells or distributes a foil balloon that is filled with lighter-than-air gas in this state shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each foil balloon or its appurtenance to counter the lift capability of the foil balloon.
(2)The person shall not attach the foil balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)A person that sells, offers for sale, or manufactures for sale, in this state, any foil balloon shall ensure that those foil balloons pass a standard test, as determined by an accredited testing facility capable of high-voltage testing.
(1)(A)The standard test shall be the IEEE 2845 standard when that standard is approved by the IEEE.
(B)The standard test shall be approved when the IEEE does all of the following:
(i)Publishes an interim standard.
(ii)Completes its trial of the interim standard.
(iii)Publishes the final approved standard, following materially substantive adjustments, if any, to the interim standard.
(2)This requirement is subject to the following phase-in period:
(A)At least 25 percent of the persons foil balloons shall comply no later than one year from the commencement date.
(B)At least 55 percent of the persons foil balloons shall comply no later than two years from the commencement date.
(C)At least 80 percent of the persons foil balloons shall comply no later than three years from the commencement date.
(D)One hundred percent of the persons foil balloons shall comply no later than four years from the commencement date.
(e)Following the completion of the phase-in period outlined in subdivision (d) and notwithstanding any other law, a person shall not sell, offer for sale, or manufacture for sale, in this state, any foil balloon, unless the balloon complies with this section.
(f)(1)All of the following dates and time periods shall be tolled when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs:
(A)The commencement date.
(B)The phase-in period outlined in paragraph (2) of subdivision (d).
(C)The prohibition against selling, offering for sale, and manufacturing for sale outlined in subdivision (e).
(2)Tolling shall last for a period of 24 months or until the serious development, manufacturing, production, or supply chain issue, or force majeure, is resolved, whichever occurs first.
(3)A serious development, manufacturing, production, or supply chain issue, or force majeure, shall be deemed to have occurred if both of the following are satisfied:
(A)The issue is outside of the control of the business that develops, manufactures, produces, or sells foil balloons.
(B)The issue makes it infeasible to develop, manufacture, produce, or sell foil balloons that otherwise would be subject to the requirement of paragraph (1) of subdivision (a).
(g)For the purposes of this section, the following terms apply:
(1)Commencement date means the date on which the IEEE approves the final standard for testing foil balloons at a level of electric distribution voltages without causing an electrical fault and all of the requirements of subparagraph (B) of paragraph (1) of subdivision (d) are met, or January 1, 2027, whichever is later.
(2)Foil balloon means a balloon that is constructed of electrically conductive material.
(3)Infeasible means incapable of being accomplished in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(4)Phase-in period means the gradual phase in of the restrictions on the sale, offer for sale, and manufacture for sale, in this state, of a foil balloon following the commencement date, as set forth in subdivision (d).
(5)Person means any individual, association, organization, partnership, business trust, limited liability company, corporation, or other entity.
SEC. 2.Section 22942.5 is added to the Business and Professions Code, to read:22942.5.(a)A person who violates or attempts to violate Section 22942 may be enjoined in any court of competent jurisdiction.
(b)(1)A person who has violated Section 22942 is liable for a civil penalty in the amount of fifty dollars ($50) for each foil balloon that was sold, offered for sale, manufactured for sale, or distributed in violation of Section 22942. This civil penalty shall not exceed two thousand five hundred dollars ($2,500) per day for a totality of violations of Section 22942, in addition to any other penalty established by law. This civil penalty may be assessed and recovered in a civil action brought in any court of competent jurisdiction.
(2)In assessing the amount of a civil penalty for a violation of this chapter, the court shall consider all of the following:
(A)The nature and extent of the violation.
(B)The number and severity of the violations.
(C)The economic effect of the penalty on the person who violated Section 22942.
(D)The persons annual revenue in both balloon sales and total sales.
(E)Whether the person who violated Section 22942 took good faith measures to comply with Section 22942 and when these measures were taken.
(F)The deterrent effect that the imposition of the penalty would have on both the person who violated Section 22942 and the regulated community as a whole.
(G)The willfulness of the persons responsible for the violation.
(H)Any other factors that justice may require.
(c)Actions pursuant to this section may be brought by the Attorney General in the name of the people of the state, by a district attorney, by a city attorney, or by a city prosecutor in a city or city and county having a full-time city prosecutor.
(d)Civil penalties collected pursuant to this section shall be paid to the office of the city attorney, city prosecutor, district attorney, or Attorney General, whichever office brought the action.
(a)A person who manufactures a foil balloon in this state that is constructed of electrically conductive material shall comply with all of the following:
(1)Permanently mark each foil balloon with a printed statement, written in a legible font size and located in a conspicuous area on the foil balloon, that warns the consumer about the dangers of releasing balloons which may come into contact with overhead power lines. of at least one of the following:
(A)The dangers of releasing balloons that may come into contact with overhead power lines.
(B)If the foil balloon is manufactured to meet the requirements described in subdivision (d), the consumers responsibilities when disposing of foil balloons.
(2)Permanently mark each foil balloon with the identity of the manufacturer.
(3)Permanently mark each foil balloon that it is in compliance with this section. section if the foil balloon is manufactured to meet the requirements described in subdivision (d). Markings prescribed under the final standard by the Institute of Electrical and Electronics Engineers (IEEE) shall be considered a suitable mark.
(b)A person who sells or distributes a foil balloon that is filled with lighter-than-air gas in this state shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each foil balloon or its appurtenance to counter the lift capability of the foil balloon.
(2)The person shall not attach the foil balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)A person that sells, offers for sale, or manufactures for sale, in this state, any foil balloon shall ensure that those foil balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition. test, as determined by an accredited testing facility capable of high-voltage testing.
(1)(A)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) standard for testing foil balloons at electric distribution voltages without causing an electrical fault when the standard is approved by IEEE, or by an equivalent body. IEEE 2845 standard when that standard is approved by the IEEE.
(B)The standard test shall be approved when IEEE, or an equivalent body, the IEEE does all of the following:
(i)Publishes an interim standard.
(ii)Completes its two-year trial of the interim standard.
(iii)Publishes the final approved standard, following materially substantive adjustments, if any, to the interim standard.
(2)This requirement is subject to the following phase-in period:
(A)At least 20 25 percent of the persons foil balloons shall comply with this section no later than one year from the commencement date.
(B)At least 50 55 percent of the persons foil balloons shall comply with this section no later than two years from the commencement date.
(C)All At least 80 percent of the persons foil balloons shall comply no later than three years from the commencement date.
(D)One hundred percent of the persons foil balloons shall comply no later than four years from the commencement date.
(e)Following the completion of the phase-in period outlined in subdivision (d) and notwithstanding any other law, a person shall not sell, offer for sale, or manufacture for sale, in this state, any foil balloon, unless the balloon complies with this section.
(f)(1)All of the following dates and time periods shall be tolled when a serious development, manufacturing, production, or supply chain issue, or force majeure, occurs:
(A)The commencement date.
(B)The phase-in period outlined in paragraph (2) of subdivision (d).
(C)The prohibition against selling, offering for sale, and manufacturing for sale outlined in subdivision (e).
(2)Tolling shall last for a period of 24 months or until the serious development, manufacturing, production, or supply chain issue, or force majeure, is resolved, whichever occurs first.
(3)A serious development, manufacturing, production, or supply chain issue, or force majeure, shall be deemed to have occurred if both of the following are satisfied:
(A)The issue is outside of the control of the business that develops, manufactures, produces, or sells foil balloons.
(B)The issue makes it infeasible to develop, manufacture, produce, or sell foil balloons that otherwise would be subject to the requirement of paragraph (1) of subdivision (a).
(f)(g)For the purposes of this section, the following terms shall have the following meanings: apply:
(1)Commencement date means the date on which the IEEE, or an equivalent body, the IEEE approves the final standard for testing foil balloons at a level of electric distribution voltages without causing an electrical fault, fault and all of the requirements of subparagraph (B) of paragraph (1) of subdivision (d) are met, or January 1, 2027, whichever is later.
(2)Foil balloon means a balloon that is constructed of electrically conductive material filled with lighter-than-air gas. material.
(3)Infeasible means incapable of being accomplished in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(3)(4)Phase-in period means the gradual phase in of the restrictions on the sale, offer for sale, and manufacture for sale, in this state, of a foil balloon following the commencement date, as set forth in subdivision (d).
(4)(5)Person means any individual, association, organization, partnership, business trust, limited liability company, corporation, or other entity.
SEC. 2.Section 22942.5 is added to the Business and Professions Code, to read:22942.5.(a)A person who violates or threatens attempts to violate Section 22942 may be enjoined in any court of competent jurisdiction.
(b)(1)A person who has violated Section 22942 is liable for a civil penalty in the amount of fifty dollars ($50) for each foil balloon that was sold, offered for sale, manufactured for sale, or distributed in violation of Section 22942. This civil penalty shall not exceed two thousand five hundred dollars ($2,500) per day, day for a totality of violations of Section 22942, in addition to any other penalty established by law. This civil penalty may be assessed and recovered in a civil action brought in any court of competent jurisdiction.
(2)In assessing the amount of a civil penalty for a violation of this chapter, the court shall consider all of the following:
(A)The nature and extent of the violation.
(B)The number and severity of the violations.
(C)The economic effect of the penalty on the person who violated Section 22942.
(D)The persons annual revenue in both balloon sales and total sales.
(D)(E)Whether the person who violated Section 22942 took good faith measures to comply with Section 22942 and when these measures were taken.
(E)(F)The deterrent effect that the imposition of the penalty would have on both the person who violated Section 22942 and the regulated community as a whole.
(F)(G)The willfulness of the persons responsible for the violation.
(G)(H)Any other factors that justice may require.
(c)Actions pursuant to this section may be brought by the Attorney General in the name of the people of the state, by a district attorney, by a city attorney, or by a city prosecutor in a city or city and county having a full-time city prosecutor.
(d)Civil penalties collected pursuant to this section shall be paid to the office of the city attorney, city prosecutor, district attorney, or Attorney General, whichever office brought the action.
(a)A person who manufactures a balloon in this state that is constructed of electrically conductive material shall comply with both all of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangerous risk of fire if the balloon comes in contact with an electrical power line. dangers of releasing balloons which may come into contact with overhead power lines.
(2)Permanently mark each balloon with the identity of the manufacturer.
(3)Permanently mark each balloon that it is in compliance with this section.
(b)A person who sells or distributes a foil balloon constructed of electrically conductive material that is filled with a gas lighter than air shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The person shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)This section shall become inoperative on September 1, 2026, and, as of January 1, 2027, is repealed.(d)A person that sells, offers for sale, or manufactures for sale, in this state, any foil balloon shall ensure that those foil balloons pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.
(1)(A)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) standard for testing foil balloons at electric distribution voltages without causing an electrical fault when the standard is approved by IEEE, or by an equivalent body.
(B)The standard test shall be approved when IEEE, or an equivalent body, does all of the following:
(i)Publishes an interim standard.
(ii)Completes its two-year trial of the interim standard.
(iii)Publishes the final approved standard, following adjustments, if any, to the interim standard.
(2)This requirement is subject to the following phase-in period:
(A)At least 20 percent of the persons foil balloons shall comply with this section no later than one year from the commencement date.
(B)At least 50 percent of the persons foil balloons shall comply with this section no later than two years from the commencement date.
(C)All of the persons foil balloons shall comply no later than three years from the commencement date.
(e)Following the completion of the phase-in period outlined in subdivision (d) and notwithstanding any other law, a person shall not sell, offer for sale, or manufacture for sale, in this state, any foil balloon, unless the balloon complies with this section.
(f)For the purposes of this section, the following terms shall have the following meanings:
(1)Commencement date means the date on which the IEEE, or an equivalent body, approves the standard for testing foil balloons at a level of electric distribution voltages without causing an electrical fault, whichever is later.
(2)Foil balloon means a balloon that is constructed of electrically conductive material filled with lighter-than-air gas.
(3)Phase-in period means the gradual phase in of the restrictions on the sale, offer for sale, and manufacture for sale, in this state, of a foil balloon following the commencement date, as set forth in subdivision (d).
(4)Person means any individual, association, organization, partnership, business trust, limited liability company, corporation, or other entity.
SEC. 2.Section 15477 is added to the Government Code, to read:15477.(a)On or before September 1, 2024, or upon the issuance of a final standard, as approved by the Institute of Electrical and Electronics Engineers(IEEE), whichever is later, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, shall adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter-than-air gas. The regulations shall do both of the following:(1)Require that to be sold or manufactured in the state, celebratory balloons made of electrically conductive material and filled with lighter-than-air gas shall pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.(2)The standard test shall be the IEEE standard for testing celebratory balloons at electric distribution voltages without causing an electrical fault, only when that standard is approved by the IEEE or an equivalent body.(b)Pursuant to Section 22942 of the Business and Professions Code, a business that sells or manufactures in this state a celebratory balloon that is constructed of electrically conductive material shall comply with all of the following:(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangers of releasing balloons which may contact overhead power lines.(2)Permanently mark each balloon with the identity of the manufacturer.(3)Permanently mark each balloon that it complies with this section.(c)Pursuant to Section 22942 of the Business and Professions Code, a business that sells or distributes a celebratory balloon constructed of electrically conductive material that is filled with lighter-than-air gas shall comply with both of the following:(1)The business shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.(2)The business shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.(d)On and after September 1, 2026, and notwithstanding any other law, a business shall not sell or offer for sale, and a manufacturer shall not manufacture for sale, in this state, any celebratory balloon made of electrically conductive material filled with lighter-than-air gas, unless the balloon complies with this section.(e)A violation of this section by a business or person shall result in a civil penalty in the amount of fifty dollars ($50) for each violation.SEC. 2.Section 22942.5 is added to the Business and Professions Code, to read:22942.5.(a)A person who violates or threatens to violate Section 22942 may be enjoined in any court of competent jurisdiction.
(b)(1)A person who has violated Section 22942 is liable for a civil penalty in the amount of fifty dollars ($50) for each foil balloon that was sold, offered for sale, manufactured for sale, or distributed in violation of Section 22942. This civil penalty shall not exceed two thousand five hundred dollars ($2,500) per day, in addition to any other penalty established by law. This civil penalty may be assessed and recovered in a civil action brought in any court of competent jurisdiction.
(2)In assessing the amount of a civil penalty for a violation of this chapter, the court shall consider all of the following:
(A)The nature and extent of the violation.
(B)The number and severity of the violations.
(C)The economic effect of the penalty on the person who violated Section 22942.
(D)Whether the person who violated Section 22942 took good faith measures to comply with Section 22942 and when these measures were taken.
(E)The deterrent effect that the imposition of the penalty would have on both the person who violated Section 22942 and the regulated community as a whole.
(F)The willfulness of the persons responsible for the violation.
(G)Any other factors that justice may require.
(c)Actions pursuant to this section may be brought by the Attorney General in the name of the people of the state, by a district attorney, by a city attorney, or by a city prosecutor in a city or city and county having a full-time city prosecutor.
(d)Civil penalties collected pursuant to this section shall be paid to the office of the city attorney, city prosecutor, district attorney, or Attorney General, whichever office brought the action.
(a)A person who manufactures a balloon in this state that is constructed of electrically conductive material shall comply with both of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangerous risk of fire if the balloon comes in contact with an electrical power line.
(2)Permanently mark each balloon with the identity of the manufacturer.
(b)A person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The person shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)This section shall become inoperative on September 1, 2026, and, as of January 1, 2027, is repealed.
SEC. 2.Section 15477 is added to the Government Code, to read:15477.(a)On or before September 1, 2024, or upon the issuance of a final standard, as approved by the Institute of Electrical and Electronics Engineers(IEEE), whichever is later, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, shall adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air lighter-than-air gas. The regulations shall do all both of the following:
(1)Require that to be sold or manufactured in the state, celebratory balloons made of electrically conductive material and filled with lighter than air lighter-than-air gas shall pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.
(2)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) IEEE standard for testing celebratory balloons at electric distribution voltages without causing an electrical fault, only when that standard is approved by the institute or an equivalent. IEEE or an equivalent body.
(3)Until the standard test described in paragraph (2) is approved by (IEEE) or other entity, the regulations shall use the latest draft version of the standard.(b)A Pursuant to Section 22942 of the Business and Professions Code, a business that sells or manufactures in this state a celebratory balloon that is constructed of electrically conductive material shall comply with all of the following:(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangers of releasing balloons which may contact overhead power lines.
(2)Permanently mark each balloon with the identity of the manufacturer.
(3)Permanently mark each balloon that it complies with this section.
(c)A Pursuant to Section 22942 of the Business and Professions Code, a business that sells or distributes a celebratory balloon constructed of electrically conductive material that is filled with lighter than air lighter-than-air gas shall comply with both of the following:(1)The business shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The business shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(d)On and after September 1, 2026, and notwithstanding any other law, a business shall not sell or offer for sale, and a manufacturer shall not manufacture for sale, in this state, any celebratory balloon made of electrically conductive material filled with lighter than air gas lighter-than-air gas, unless the balloon complies with this section.
(e)A violation of this section by a business or person shall result in a civil penalty in the amount of fifty dollars ($50) for each violation.
(a)A person who manufactures a balloon in this state that is constructed of electrically conductive material shall comply with both of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangerous risk of fire if the balloon comes in contact with an electrical power line.
(2)Permanently mark each balloon with the identity of the manufacturer.
(b)A person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The person shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)This section shall become inoperative on September 1, 2024, 2026, and, as of January 1, 2025, 2027, is repealed.
SEC. 2.Section 15477 is added to the Government Code, to read:15477.(a)On or before September 1, 2024, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, shall adopt regulations governing the sale or manufacture in the state of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The regulations shall do all of the following:
(1)Require that to be sold or manufactured in the state, celebratory balloons made of electrically conductive material and filled with lighter than air gas shall pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.
(2)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) standard for testing celebratory balloons at electric distribution voltages without causing an electrical fault, when that standard is approved by the institute or an equivalent.
(3)Until the standard test described in paragraph (2) is approved by (IEEE) or other entity, the regulations shall use the latest draft version of the standard.
(b)A business that sells or manufactures in this state a celebratory balloon that is constructed of electrically conductive material shall comply with all of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangers of releasing balloons which may contact overhead power lines.
(2)Permanently mark each balloon with the identity of the manufacturer.
(3)Permanently mark each balloon that it complies with this section.
(c)A business that sells or distributes a celebratory balloon constructed of electrically conductive material that is filled with lighter than air gas shall comply with both of the following:
(1)The business shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The business shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(d)On and after September 1, 2025, 2026, a business shall not sell or offer for sale, and a manufacturer shall not manufacture for sale, in this state, any celebratory balloon made of electrically conductive material filled with lighter than air gas unless the balloon complies with this section.
(e)A violation of this section by a business or person shall result in a civil penalty in the amount of fifty ($50) for each violation.
(a)A person who manufactures a balloon in this state that is constructed of electrically conductive material shall comply with both of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangerous risk of fire if the balloon comes in contact with an electrical power line.
(2)Permanently mark each balloon with the identity of the manufacturer.
(b)A person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The person shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)This section shall become inoperative on September 1, 2022, 2024, and, as of January 1, 2023, 2025, is repealed.
SEC. 2.Section 15477 is added to the Government Code, to read:15477.(a)On or before September 1, 2022, 2024, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, shall adopt regulations governing the sale or manufacture in the State state of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The regulations shall do all of the following:
(1)Require that to be sold or manufactured in the State, state, celebratory balloons made of electrically conductive material and filled with lighter than air gas shall pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.
(2)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) standard for testing celebratory balloons at electric distribution voltages without causing an electrical fault, when that standard is approved by the institute or an equivalent.
(3)Until the standard test described in paragraph (2) is approved by (IEEE) or other entity, the regulations shall use the latest draft version of the standard.
(b)A business that sells or manufactures in this state a celebratory balloon that is constructed of electrically conductive material shall comply with all of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangers of releasing balloons which may contact overhead power lines.
(2)Permanently mark each balloon with the identity of the manufacturer.
(3)Permanently mark each balloon that it complies with this section.
(c)A business that sells or distributes a celebratory balloon constructed of electrically conductive material that is filled with lighter than air gas shall comply with both of the following:
(1)The business shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The business shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(d)On and after September 1, 2023, 2025, a business shall not sell or offer for sale, and a manufacturer shall not manufacture for sale, in this state, any celebratory balloon made of electrically conductive material filled with lighter than air gas unless the balloon complies with this section.
(e)A violation of this section by a business or person shall result in a civil penalty in the amount of fifty ($50) for each violation.
(a)A person who manufactures a balloon in this state that is constructed of electrically conductive material shall comply with both of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangerous risk of fire if the balloon comes in contact with an electrical power line.
(2)Permanently mark each balloon with the identity of the manufacturer.
(b)A person who sells or distributes a balloon constructed of electrically conductive material that is filled with a gas lighter than air shall comply with both of the following:
(1)The person shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The person shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(c)This section shall not apply to manned hot air balloons or to balloons used in governmental or scientific research projects.
(d)This section shall become inoperative on September 1, 2022, and, as of January 1, 2023, is repealed.
SEC. 2.Section 15477 is added to the Government Code, to read:15477.(a)On or before September 1, 2022, the Office of Energy Infrastructure Safety, in consultation with the Office of Emergency Services, shall adopt regulations governing the sale or manufacture in the State of celebratory balloons constructed of electrically conductive material and filled with lighter than air gas. The regulations shall do all of the following:
(1)Require that to be sold or manufactured in the State, celebratory balloons made of electrically conductive material and filled with lighter than air gas shall pass a standard test performed by a reputable electric testing center without causing a fault at high-voltage electric distribution levels, which could cause an outage or ignition.
(2)The standard test shall be the Institute of Electrical and Electronics Engineers (IEEE) standard for testing celebratory balloons at electric distribution voltages without causing an electrical fault, when that standard is approved by the institute or an equivalent.
(3)Until the standard test described in paragraph (2) is approved by (IEEE) or other entity, the regulations shall use the latest draft version of the standard.
(b)A business that sells or manufactures in this state a celebratory balloon that is constructed of electrically conductive material shall comply with all of the following:
(1)Permanently mark each balloon with a printed statement, written in a legible font size and located in a conspicuous area on the balloon, that warns the consumer about the dangers of releasing balloons which may contact overhead power lines.
(2)Permanently mark each balloon with the identity of the manufacturer.
(3)Permanently mark each balloon that it complies with this section.
(c)A business that sells or distributes a celebratory balloon constructed of electrically conductive material that is filled with lighter than air gas shall comply with both of the following:
(1)The business shall affix an object of sufficient weight to each balloon or its appurtenance to counter the lift capability of the balloon.
(2)The business shall not attach the balloon to an electrically conductive string, tether, or streamer, to a balloon constructed of electrically conductive material, or to any other electrically conductive object.
(d)On and after September 1, 2023, a business shall not sell or offer for sale, and a manufacturer shall not manufacture for sale, in this state, any celebratory balloon made of electrically conductive material filled with lighter than air gas unless the balloon complies with this section.
(e)A violation of this section by a business or person shall result in a civil penalty in the amount of fifty ($50) for each violation.
|
Date
|
Status
|
|---|---|
| Sep 18, 2022 | Chaptered by Secretary of State - Chapter 401, Statutes of 2022. |
| Sep 18, 2022 | Approved by the Governor. |
| Sep 7, 2022 | Enrolled and presented to the Governor at 4 p.m. |
| Aug 30, 2022 | Senate amendments concurred in. To Engrossing and Enrolling. (Ayes 78. Noes 0.). |
| Aug 30, 2022 | Read third time. Passed. Ordered to the Assembly. (Ayes 40. Noes 0. Page 5234.). |
| Aug 23, 2022 | Read second time. Ordered to third reading. |
| Aug 22, 2022 | Read third time and amended. Ordered to second reading. |
| Aug 2, 2022 | Read second time. Ordered to third reading. |
| Aug 1, 2022 | From committee: Be ordered to second reading pursuant to Senate Rule 28.8. |
| Jun 21, 2022 | Withdrawn from committee. |
| Jun 20, 2022 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on E., U. & C. |
| Jun 6, 2022 | From committee: Do pass and re-refer to Com. on E., U. & C. (Ayes 11. Noes 0.) (June 6). Re-referred to Com. on E., U. & C. |
| May 31, 2022 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on B., P. & E.D. |
| May 5, 2022 | Action rescinded whereby the bill was referred to Com. on JUD. |
| May 4, 2022 | Referred to Coms. on B., P. & E.D., E., U. & C. and JUD. |
| Jan 20, 2022 | In Senate. Read first time. To Com. on RLS. for assignment. |
| Jan 20, 2022 | Read third time. Passed. Ordered to the Senate. (Ayes 63. Noes 0. Page 3343.) |
| Jan 11, 2022 | From inactive file. |
| Jan 10, 2022 | Notice of intention to remove from inactive file given by Assembly Member Quirk. |
| Jun 2, 2021 | Ordered to inactive file at the request of Assembly Member Quirk. |
| May 25, 2021 | Read second time. Ordered to third reading. |
| May 24, 2021 | Read second time and amended. Ordered returned to second reading. |
| May 20, 2021 | From committee: Amend, and do pass as amended. (Ayes 16. Noes 0.) (May 20). |
| Apr 28, 2021 | In committee: Set, first hearing. Referred to APPR. suspense file. |
| Apr 14, 2021 | From committee: Do pass and re-refer to Com. on APPR. (Ayes 17. Noes 0.) (April 13). Re-referred to Com. on APPR. |
| Mar 26, 2021 | Re-referred to Com. on B. & P. |
| Mar 25, 2021 | From committee chair, with author's amendments: Amend, and re-refer to Com. on B. & P. Read second time and amended. |
| Feb 25, 2021 | Referred to Com. on B. & P. |
| Feb 18, 2021 | From printer. May be heard in committee March 20. |
| Feb 17, 2021 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 30, 2022 | Assembly 3rd Reading AB847 Quirk By Hueso | Senate Floor |
Passed |
|
| Aug 30, 2022 | AB 847 Quirk Concurrence in Senate Amendments | Assembly Floor |
Passed |
|
| Jan 20, 2022 | AB 847 Quirk Assembly Third Reading | Assembly Floor |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
Bill Author
Bill Co-Author(s):