AB 2: Recycling: solar photovoltaic modules.
- Session Year: 2023-2024
- House: Assembly
- Latest Version Date: 2023-06-28
Current Status:
Failed
(2023-09-01: In committee: Held under submission.)
Introduced
In Committee
First Chamber
In Committee
Second Chamber
Enacted
The Electronic Waste Recycling Act of 2003 (act) requires a retailer selling a covered electronic device in this state to collect from a consumer at the time of retail sale a covered electronic waste recycling fee or a covered battery-embedded waste recycling fee, as specified. The act defines covered electronic device to include certain video display devices and battery-embedded products. The act requires all charges collected pursuant to the act to be deposited into specified subaccounts within the Electronic Waste Recovery and Recycling Account, and outlines certain other requirements related to the establishment, adjustment, and administration of the charge. Moneys in the subaccounts are continuously appropriated for specified purposes, including, but not limited to, paying covered electronic waste recycling fee refunds and making electronic waste recovery and recycling payments. Moneys in the account may be expended, upon appropriation by the Legislature in the annual Budget Act, for other specified purposes, including the administration of the act by the Department of Resources Recycling and Recovery (CalRecycle) and the Department of Toxic Substances Control (DTSC) and to provide funding to DTSC to implement and enforce the hazardous waste control laws as they relate to covered electronic devices.
Existing law incorporates the requirements and other provisions of the act by reference as requirements and provisions of the hazardous waste control laws. The act also expressly authorizes DTSC to enforce the act, and all regulations adopted pursuant to the act, through the hazardous waste control laws. A violation of the hazardous waste control laws is a crime.
This bill would, among other things, expand the definition of covered electronic device to include a customer-owned solar PV module, as defined, thereby expanding the scope of the act to include covered solar photovoltaic (PV) module products, for limited purposes, as provided. The bill would also require, on or before October 1, 2026, and on or before October 1 each year thereafter, CalRecycle to establish a covered solar PV recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The bill would require the charge to be imposed upon a consumer or a service provider serving the consumer for the purchase of a new or refurbished covered solar PV module product. The bill would also require the charge to be adjusted annually based on the California Consumer Price Index. The bill would create the Covered Solar PV Module Recycling Fee Subaccount as a continuously appropriated fund in the Electronic Waste Recovery and Recycling Account. Because the funds deposited to the Covered Solar PV Module Recycling Fee Subaccount would be a new source of funds in the continuously appropriated subaccount within the continuously appropriated Electronic Waste Recovery and Recycling Account, the bill would make an appropriation. By expanding the scope of the act to make it applicable to covered solar PV module products, the bill would expand the scope of a crime, thereby imposing a state-mandated local program.
Existing law requires a manufacturer of a covered electronic device to maintain and keep accessible for a minimum of 3 years all records required to be kept or submitted pursuant to the act and, upon request, provide those records to CalRecycle. The act requires all reports and records provided to CalRecycle pursuant to the act to be provided under penalty of perjury.This bill, by expanding the definition of covered electronic device, would impose these requirements on manufacturers of covered solar PV module products. By expanding the scope of persons subject to the acts requirements and by expanding the scope of the crime of perjury, the bill would expand the scope of a crime, thereby imposing a state-mandated local program.Beginning January 1, 2028, the bill would require a solar photovoltaic module, that is not a customer-owned solar PV module, to be included in a plan that describes how the module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
The Electronic Waste Recycling Act of 2003 (act) requires a retailer selling a covered electronic device in this state to collect from a consumer at the time of retail sale a covered electronic waste recycling fee or a covered battery-embedded waste recycling fee, as specified. The act defines covered electronic device to include certain video display devices and battery-embedded products. The act requires all charges collected pursuant to the act to be deposited into specified subaccounts within the Electronic Waste Recovery and Recycling Account, and outlines certain other requirements related to the establishment, adjustment, and administration of the charge. Moneys in the subaccounts are continuously appropriated for specified purposes, including, but not limited to, paying covered electronic waste recycling fee refunds and making electronic waste recovery and recycling payments. Moneys in the account may be expended, upon appropriation by the Legislature in the annual Budget Act, for other specified purposes, including the administration of the act by the Department of Resources Recycling and Recovery (CalRecycle) and the Department of Toxic Substances Control (DTSC) and to provide funding to DTSC to implement and enforce the hazardous waste control laws as they relate to covered electronic devices.
Existing law incorporates the requirements and other provisions of the act by reference as requirements and provisions of the hazardous waste control laws. The act also expressly authorizes DTSC to enforce the act, and all regulations adopted pursuant to the act, through the hazardous waste control laws. A violation of the hazardous waste control laws is a crime.
This bill would, among other things, expand the definition of covered electronic device to include a customer-owned solar PV module, as defined, thereby expanding the scope of the act to include covered solar photovoltaic (PV) module products, as provided. The bill would also require, on or before October 1, 2026, and on or before October 1 each year thereafter, CalRecycle to establish a covered solar PV recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The bill would require the charge to be imposed upon a consumer or a service provider serving the consumer for the purchase of a new or refurbished covered solar PV module product. The bill would also require the charge to be adjusted annually based on the California Consumer Price Index. The bill would create the Covered Solar PV Module Recycling Fee Subaccount as a continuously appropriated fund in the Electronic Waste Recovery and Recycling Account. Because the funds deposited to the Covered Solar PV Module Recycling Fee Subaccount would be a new source of funds in the continuously appropriated subaccount within the continuously appropriated Electronic Waste Recovery and Recycling Account, the bill would make an appropriation. By expanding the scope of the act to make it applicable to covered solar PV module products, the bill would expand the scope of a crime, thereby imposing a state-mandated local program.
Existing law requires a manufacturer of a covered electronic device to maintain and keep accessible for a minimum of 3 years all records required to be kept or submitted pursuant to the act and, upon request, provide those records to CalRecycle. The act requires all reports and records provided to CalRecycle pursuant to the act to be provided under penalty of perjury.
This bill, by expanding the definition of covered electronic device, would impose these requirements on manufacturers of covered solar PV module products. By expanding the scope of persons subject to the acts requirements and by expanding the scope of the crime of perjury, the bill would expand the scope of a crime, thereby imposing a state-mandated local program.
Beginning January 1, 2028, the bill would require a solar photovoltaic module, that is not a customer-owned solar PV module, to be included in a plan that describes how the module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
The California Integrated Waste Management Act of 1989, administered by the Department of Resources Recycling and Recovery, generally regulates the disposal, management, and recycling of solid waste. The act establishes stewardship programs for various products, including, among others, carpet, mattresses, and pharmaceutical and sharps waste.This bill would require a manufacturer of solar photovoltaic panels sold or offered for sale in this state, or its agent, to develop an end-of-life management plan for the management and recycling of the solar photovoltaic panels it manufactured and the component materials. The bill would specify the required contents of an end-of-life management plan and would require the department to provide guidelines for developing an end-of-life management plan. The bill would require an end-of-life management plan be submitted to the department for approval or disapproval and would require a manufacturer to implement the plan as approved. The bill would require a manufacturer or its agent to report to the department annually regarding the implementation of its end-of-life management plan, as specified. The bill would require the department to adopt regulations for the implementation of these provisions and to impose an administrative fee to cover the departments full administrative and enforcement costs of these provisions. The bill would subject a manufacturer that violates the requirements of this bill to an administrative civil penalty of $500 for the first violation and $1,000 for a subsequent violation.The California Integrated Waste Management Act of 1989, administered by the Department of Resources Recycling and Recovery, generally regulates the disposal, management, and recycling of solid waste. The act establishes stewardship programs for various products, including, among others, carpet, mattresses, and pharmaceutical and sharps waste.
This bill would require a manufacturer of solar photovoltaic panels sold or offered for sale in this state, or its agent, to develop an end-of-life management plan for the management and recycling of the solar photovoltaic panels it manufactured and the component materials. The bill would specify the required contents of an end-of-life management plan and would require the department to provide guidelines for developing an end-of-life management plan. The bill would require an end-of-life management plan be submitted to the department for approval or disapproval and would require a manufacturer or its agent to implement the plan as approved. The bill would require a manufacturer or its agent to report to the department annually regarding the implementation of its end-of-life management plan, as specified. The bill would require the department to adopt regulations for the implementation of these provisions. provisions and to impose an administrative fee to cover the departments full administrative and enforcement costs of these provisions. The bill would subject a manufacturer that violates the requirements of this bill to an administrative civil penalty of $500 for the first violation and $1,000 for a subsequent violation.
The California Integrated Waste Management Act of 1989, administered by the Department of Resources Recycling and Recovery, generally regulates the disposal, management, and recycling of solid waste. The act establishes stewardship programs for various products, including, among others, carpet, mattresses, and pharmaceutical and sharps waste.
This bill would require a manufacturer of solar photovoltaic panels sold or offered for sale in this state, or its agent, to develop an end-of-life management plan for the management and recycling of the solar photovoltaic panels it manufactured and the component materials. The bill would specify the required contents of an end-life end-of-life management plan and would require the department to provide guidelines for developing an end-life end-of-life management plan. The bill would require an end-of-life management plan be submitted to the department for approval or disapproval and would require a manufacturer or its agent to implement the plan as approved. The bill would require a manufacturer or its agent to report to the department annually regarding the implementation of its end-of-life management plan, as specified. The bill would require the department to adopt regulations for the implementation of these provisions. The bill would subject a manufacturer that violates the requirements of this bill to an administrative civil penalty of $500 for the first violation and $1,000 for a subsequent violation.
The California Integrated Waste Management Act of 1989, administered by the Department of Resources Recycling and Recovery, generally regulates the disposal, management, and recycling of solid waste. The act establishes stewardship programs for various products, including, among others, carpet, mattresses, and pharmaceutical and sharps waste.
This bill would state the intent of the Legislature to enact future legislation that would create a convenient, safe, and environmentally sound system for the end-of-life management of photovoltaic modules, minimization of hazardous waste, and recovery of commercially valuable materials.This bill would require a manufacturer of solar photovoltaic panels sold or offered for sale in this state, or its agent, to develop an end-of-life management plan for the management and recycling of the solar photovoltaic panels it manufactured and the component materials. The bill would specify the required contents of an end-life management plan and would require the department to provide guidelines for developing an end-life management plan. The bill would require an end-of-life plan be submitted to the department for approval and would require a manufacturer or its agent to implement the plan as approved. The bill would require a manufacturer or its agent to report to the department annually regarding the implementation of its end-of-life management plan, as specified. The bill would require the department to adopt regulations for the implementation of these provisions.
The California Integrated Waste Management Act of 1989, administered by the Department of Resources Recycling and Recovery, generally regulates the disposal, management, and recycling of solid waste.
This bill would state the intent of the Legislature to enact future legislation that would create a convenient, safe, and environmentally sound system for the end-of-life management of photovoltaic modules, minimization of hazardous waste, and recovery of commercially valuable materials.
For purposes of this chapter, the following terms have the following meanings, unless the context clearly requires otherwise:
(a)Account means the Electronic Waste Recovery and Recycling Account created in the Integrated Waste Management Fund pursuant to Section 42476.
(b)Authorized collector means any of the following:
(1)A city, county, or district that collects covered electronic devices.
(2)A person or entity that is required or authorized by a city, county, or district to collect covered electronic devices pursuant to the terms of a contract, license, permit, or other written authorization.
(3)A nonprofit organization that collects or accepts covered electronic devices.
(4)A manufacturer or agent of the manufacturer that collects, consolidates, and transports covered electronic devices for recycling from consumers, businesses, institutions, and other generators.
(5)An entity that collects, handles, consolidates, and transports covered electronic devices and has filed applicable notifications with DTSC pursuant to Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(c)CalRecycle means the Department of Resources Recycling and Recovery.
(d)CDTFA means the California Department of Tax and Fee Administration.
(e)Consumer means a person who purchases a new or refurbished covered electronic device in a transaction that is a retail sale or in a transaction to which a use tax applies pursuant to Part 1 (commencing with Section 6001) of Division 2 of the Revenue and Taxation Code.
(f)(1)Covered battery-embedded product means a product containing a battery from which the battery is not designed to be easily removed from the product by the user of the product with no more than commonly used household tools.
(2)Covered battery-embedded product does not include any of the following:
(A)A medical device, as defined in Section 321(h) of Title 21 of the United States Code, if either of the following applies:
(i)It is a Class I device as defined in Section 360c of Title 21 of the United States Code, and either of the following applies:
(I)It is a device described in Section 414.202 of Title 42 of the Code of Federal Regulations.
(II)Either of the following applies:
(ia)The device is predominantly used in a health care setting by a provider.
(ib)The device is predominantly prescribed by a health care provider.
(ii)It is a Class II or Class III device as defined in Section 360c of Title 21 of the United States Code.
(B)A covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g).
(C)An energy storage system, as defined in subdivision (a) of Section 2835 of the Public Utilities Code.
(D)An electronic nicotine delivery system, as defined in Section 375(7) of Title 15 of the United States Code.
(3)CalRecycle may consult with other state agencies to determine if a product meets the definition of a covered battery-embedded product.
(4)Covered battery-embedded waste recycling fee means the fee imposed for covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) pursuant to Article 3 (commencing with Section 42464).
(g)(1)Covered electronic device means any of the following:
(A)Except as provided in paragraph (2), a video display device containing a screen greater than four inches, measured diagonally, that is identified in the regulations adopted by DTSC pursuant to subdivision (c) of Section 25214.10.1 of the Health and Safety Code.
(B)Any covered battery-embedded product, as defined in subdivision (f).
(C)A customer-owned solar PV module, as defined in subdivision (k). Notwithstanding subdivisions (h) and (i), a customer-owned solar PV module is only covered electronic waste for purposes of subdivisions (c) and (d) of Section 42464, Section 42464.2, subdivision (a) of Section 42476, and subdivision (a) of Section 42479.
(2)Covered electronic device, as defined in subparagraph (A) of paragraph (1), does not include any of the following:
(A)A video display device that is a part of a motor vehicle, as defined in Section 415 of the Vehicle Code, or any component part of a motor vehicle assembled by, or for, a vehicle manufacturer or franchised dealer, including replacement parts for use in a motor vehicle.
(B)A video display device that is contained within, or a part of a piece of industrial, commercial, or medical equipment, including monitoring or control equipment.
(C)A video display device that is contained within a clothes washer, clothes dryer, refrigerator, refrigerator and freezer, microwave oven, conventional oven or range, dishwasher, room air-conditioner, dehumidifier, or air purifier.
(D)An electronic device, on and after the date that it ceases to be a covered electronic device pursuant to subdivision (f) of Section 25214.10.1 of the Health and Safety Code.
(h)Covered electronic waste or covered e-waste means a covered electronic device that is discarded.
(i)Covered electronic waste recycling fee or covered e-waste recycling fee means the fee imposed for covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) pursuant to Article 3 (commencing with Section 42464).
(j)Covered electronic waste recycler or covered e-waste recycler means any of the following:
(1)A person who engages in the manual or mechanical separation of covered electronic devices to recover components and commodities contained therein for the purpose of reuse or recycling.
(2)A person who changes the physical or chemical composition of a covered electronic device, in accordance with the requirements of Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code and the regulations adopted pursuant to that chapter, by deconstructing, size reduction, crushing, cutting, sawing, compacting, shredding, or refining for purposes of segregating components, for purposes of recovering or recycling those components, and who arranges for the transport of those components to an end user.
(3)A manufacturer who meets any conditions established by this chapter and Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code for the collection or recycling of covered electronic waste.
(k)Customer-owned solar PV module means a solar photovoltaic module that is owned by the customer being directly served by that solar photovoltaic module and not otherwise covered by a service an agreement that includes a plan described in Section 42499.6.
(l)Director means the Director of Resources Recycling and Recovery.
(m)Discarded has the same meaning as set forth in subdivision (b) of Section 25124 of the Health and Safety Code.
(n)DTSC means the Department of Toxic Substances Control.
(o)Electronic waste recovery payment means an amount established and paid by CalRecycle pursuant to Section 42477.
(p)Electronic waste recycling payment means an amount established and paid by CalRecycle pursuant to Section 42478.
(q)Hazardous material has the same meaning as set forth in Section 25501 of the Health and Safety Code.
(r)(1)(A)Manufacturer means a person who manufactures a covered electronic device and who owns or is the exclusive licensee of the brand or trademark under which the covered electronic device is sold, offered for sale, or distributed in the state.
(B)If there is no person in the state who is the manufacturer for purposes of subparagraph (A), the manufacturer of the covered electronic device is the owner or licensee of a brand or trademark under which a covered electronic device is sold, offered for sale, or distributed in the state.
(C)If there is no person in the state who is the manufacturer for purposes of subparagraph (A) or (B), the manufacturer of the covered electronic device is the person who sells, offers for sale, or distributes the covered electronic device into the state for sale, offer for sale, or distribution in the state.
(2)For purposes of this chapter, the sale of a covered electronic device shall be deemed to occur in the state if the covered electronic device is delivered to the purchaser in the state.
(s)Person means an individual, trust firm, joint stock company, business concern, and corporation, including, but not limited to, a government corporation, partnership, limited liability company, and association. Notwithstanding Section 40170, person also includes a city, county, city and county, district, commission, the state or a department, agency, or political subdivision thereof, an interstate body, and the United States and its agencies and instrumentalities to the extent permitted by law.
(t)Recycling has the same meaning as set forth in subdivision (a) of Section 25121.1 of the Health and Safety Code.
(u)(1)Refurbished, when used to describe a covered electronic device, other than one defined in subparagraph (C) of paragraph (1) of subdivision (g), means a device that the manufacturer has tested and returned to a condition that meets factory specifications for the device, has repackaged, and has labeled as refurbished.
(2)Refurbished, when used to describe a covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g), means a device that the manufacturer or a third party has tested and returned to a condition that meets factory specifications for the device and has been labeled as refurbished.
(v)Retailer means a person who makes a retail sale of a new or refurbished covered electronic device. Retailer includes a manufacturer of a covered electronic device who sells that covered electronic device directly to a consumer through any means, including, but not limited to, a transaction conducted through a sales outlet, catalog, or the Internet, or any other similar electronic means.
(w)(1)Retail sale has the same meaning as set forth in Section 6007 of the Revenue and Taxation Code.
(2)Retail sale does not include the sale of a covered electronic device that is temporarily stored or used in the state for the sole purpose of preparing the covered electronic device for use thereafter solely outside the state, and that is subsequently transported outside the state and thereafter used solely outside the state.
(x)Vendor means a person that makes a sale of a covered electronic device for the purpose of resale to a retailer who is the lessor of the covered electronic device to a consumer under a lease that is a continuing sale and purchase pursuant to Part 1 (commencing with Section 6001) of Division 2 of the Revenue and Taxation Code.
(y)Video display device means an electronic device with an output surface that displays, or is capable of displaying, moving graphical images or a visual representation of image sequences or pictures, showing a number of quickly changing images on a screen in fast succession to create the illusion of motion, including, if applicable, a device that is an integral part of the display, in that it cannot be easily removed from the display by the consumer, that produces the moving image on the screen. A video display device may use, but is not limited to, a cathode ray tube (CRT), liquid crystal display (LCD), gas plasma, digital light processing, or other image projection technology.
SEC. 2.Section 42464 of the Public Resources Code is amended to read:42464.(a)On and after January 1, 2005, or as otherwise provided by Section 25214.10.1 of the Health and Safety Code, a consumer shall pay a covered electronic waste recycling fee upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 in the following amounts:
(1)Six dollars ($6) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size of less than 15 inches measured diagonally.
(2)Eight dollars ($8) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size greater than or equal to 15 inches but less than 35 inches measured diagonally.
(3)Ten dollars ($10) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size greater than or equal to 35 inches measured diagonally.
(b)(1)On and after January 1, 2026, a consumer shall pay a covered battery-embedded waste recycling fee in an amount determined by CalRecycle pursuant to paragraph (3) upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(2)Beginning on August 1, 2028, CalRecycle, in collaboration with DTSC, may establish more than one covered electronic waste recycling fee for covered battery-embedded waste recycling fee for covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, based on categories of covered battery-embedded products, as determined by CalRecycle in collaboration with DTSC.
(3)On or before October 1, 2025, and on or before October 1 each year thereafter, CalRecycle shall establish a covered electronic waste recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The fee shall be imposed upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463. The fee shall go into effect on January 1 of each calendar year after the fee is adopted. The maximum fee shall be adjusted annually based on the California Consumer Price Index as compiled and reported by the Department of Industrial Relations.
(c)(1)On and after January 1, 2028, a consumer or a service provider serving the consumer shall pay a covered solar PV recycling fee in an amount determined by CalRecycle pursuant to paragraph (2) upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463.
(2)On or before October 1, 2026, and on or before October 1 of each year thereafter, CalRecycle shall establish a covered solar PV recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The fee shall apply to the purchase of a new or refurbished covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463. The fee shall go into effect on January 1 of the year after the fee is adopted. The maximum fee shall be adjusted annually based on the California Consumer Price Index as compiled and reported by the Department of Industrial Relations.
(d)Except as provided in subdivision (f), a retailer shall collect from the consumer a covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, at the time of the retail sale of a covered electronic device.
(e)(1)A retailer may retain 3 percent of the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, as reimbursement for all costs associated with collecting the fee and shall transmit the remainder of the fee to the state pursuant to Section 42464.4.
(2)If a retailer makes an election pursuant to paragraph (2) of subdivision (f), and the conditions of subparagraphs (A), (B), and (C) of paragraph (2) of subdivision (f) are met, the vendor, in lieu of the retailer, may retain 3 percent of the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, as reimbursement for all costs associated with collecting the fee and the vendor shall transmit the remainder of the fee to the state pursuant to Section 42464.4.
(f)(1)If a retailer elects to pay the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on behalf of the consumer, the retailer shall provide an express statement to that effect on the receipt given to the consumer at the time of sale. If a retailer elects to pay the covered electronic waste recycling fee on behalf of the consumer, the fee is a debt owed by the retailer to the state, and the consumer is not liable for the fee.
(2)A retailer may elect to pay the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on behalf of the consumer by paying the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, to the retailers vendor, but only if all of the following conditions are met:
(A)The vendor is registered with CDTFA to collect and remit the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, pursuant to this chapter.
(B)The vendor holds a valid sellers permit pursuant to Article 2 (commencing with Section 6066) of Chapter 2 of Part 1 of Division 2 of the Revenue and Taxation Code.
(C)The retailer pays the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, to the vendor that is separately stated on the vendors invoice to the retailer.
(D)The retailer provides an express statement on the invoice, contract, or other record documenting the sale that is given to the consumer, that the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, has been paid on behalf of the consumer.
(3)For the purpose of making the election in paragraph (2), if the conditions set forth in subparagraphs (A), (B), (C), and (D) of paragraph (2), are met, the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, is a debt owed by the vendor to the state, and the retailer is not liable for the fee.
(g)The retailer shall separately state the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on the receipt given to the consumer at the time of sale.
(h)On or before August 1, 2005, and, thereafter, no more frequently than annually, and no less frequently than biennially, CalRecycle, in collaboration with DTSC, shall review, at a public hearing, the covered electronic waste recycling fee outlined in subdivision (a) and shall make any adjustments to the fee to ensure that there are sufficient revenues in the Covered Electronic Waste Recycling Fee Subaccount to fund the covered electronic waste recycling program, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 and the resulting covered e-waste, established pursuant to this chapter. Adjustments to the fee that are made on or before August 1, shall apply to the calendar year beginning the following January 1. CalRecycle shall base an adjustment of the covered electronic waste recycling fees on both of the following factors:
(1)The sufficiency, and any surplus, of revenues in the Covered Electronic Waste Recycling Fee Subaccount to fund the collection, consolidation, and recycling of covered electronic waste resulting from covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste, that is projected to be recycled in the state.
(2)The sufficiency of revenues in the Covered Electronic Waste Recycling Fee Subaccount for CalRecycle and DTSC to administer, enforce, and promote the program established pursuant to this chapter, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 and the resulting covered e-waste, plus a prudent reserve not to exceed 5 percent of the amount in the Covered Electronic Waste Recycling Fee Subaccount.
(i)Following the setting of the covered battery-embedded waste recycling fee pursuant to paragraph (3) of subdivision (b), on or before August 1, 2027, and, thereafter, no more frequently than annually, and no less frequently than biennially, CalRecycle, in collaboration with DTSC, shall review, at a public hearing, the covered battery-embedded waste recycling fee outlined in subdivision (b) and shall make any fair and reasonable adjustments to the fee to ensure that there are sufficient revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount to fund the covered electronic waste recycling program established pursuant to this chapter related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste. Adjustments to the fee fees that are made on or before August 1, shall apply to the calendar year beginning the following January 1. CalRecycle shall base an adjustment of the covered battery-embedded waste recycling fees on both of the following factors:
(1)The sufficiency, and any surplus, of revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount to fund the collection, consolidation, and recycling of covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, that is projected to be recycled in the state.
(2)The sufficiency of revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount for CalRecycle and DTSC to administer, enforce, and promote the program established pursuant to this chapter, related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste, plus a prudent reserve not to exceed 5 percent of the amount in the Covered Battery-Embedded Waste Recycling Fee Subaccount.
SEC. 3.Section 42464.2 of the Public Resources Code is amended to read:42464.2.CDTFA shall collect the covered electronic waste recycling fee, the covered battery-embedded waste recycling fee, and the covered solar PV recycling fee pursuant to the Fee Collection Procedures Law (Part 30 (commencing with Section 55001) of Division 2 of the Revenue and Taxation Code). For purposes of this section, the reference in the Fee Collection Procedures Law to feepayer shall include a retailer, a consumer, and a vendor, in the case of a retailers election pursuant to paragraph (2) of subdivision (f) of Section 42464.
SEC. 4.Section 42476 of the Public Resources Code is amended to read:42476.(a)The Electronic Waste Recovery and Recycling Account is hereby established in the Integrated Waste Management Fund. The Covered Electronic Waste Recycling Fee Subaccount, the Covered Battery-Embedded Waste Recycling Fee Subaccount, and the Covered Solar PV Module Recycling Fee Subaccount are hereby created in the Electronic Waste Recovery and Recycling Account. All covered electronic waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Electronic Waste Recycling Fee Subaccount. All covered battery-embedded waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Battery-Embedded Waste Recycling Fee Subaccount. All covered electronic waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Solar PV Module Recycling Fee Subaccount.
(1)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Electronic Waste Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered electronic waste recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers, for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(2)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Battery-Embedded Waste Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered battery-embedded waste recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(3)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Solar PV Module Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered solar PV recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(b)(1)The money in the Covered Electronic Waste Recycling Fee Subaccount may be expended for the following purposes only upon appropriation by the Legislature in the annual Budget Act:
(A)For the administration of this chapter by CalRecycle and DTSC, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(B)To reimburse CDTFA for its administrative costs of registering, collecting, making refunds, and auditing retailers and consumers in connection with the covered electronic waste recycling fee imposed under Section 42464.
(C)To provide funding to DTSC to implement and enforce Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, as and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, including any regulations adopted by DTSC pursuant to that chapter, as that chapter relates to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(D)To establish the public information program specified in subdivision (d), as it relates to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(E)For expenditure pursuant to paragraph (2) of subdivision (a) of, and paragraph (2) of subdivision (b) of, Section 17001.
(2)The money in the Covered Battery-Embedded Waste Recycling Fee Subaccount may be expended solely for the following purposes only upon appropriation by the Legislature in the annual Budget Act:
(A)For the administration of this chapter by CalRecycle and DTSC, as related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463 and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(B)To reimburse CDTFA for its administrative costs of registering, collecting, making refunds, and auditing retailers and consumers in connection with the covered battery-embedded waste recycling fee imposed under Section 42464.
(C)To provide funding to DTSC to implement and enforce Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code, as it relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and as it relates to covered electronic waste resulting from discarded covered electronic devices, defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, including any regulations adopted by DTSC pursuant to that chapter, as that chapter relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463 and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(D)To establish the public information program specified in subdivision (d), as it relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and as it relates to covered electronic waste resulting from covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(3)Any fines or penalties collected pursuant to this chapter shall be deposited in the Electronic Waste Penalty Subaccount, which is hereby established in the account. The funds in the Electronic Waste Penalty Subaccount may be expended by CalRecycle or DTSC only upon appropriation by the Legislature.
(c)Notwithstanding Section 16475 of the Government Code, any interest earned upon funds in the Electronic Waste Recovery and Recycling Account shall be deposited in that account for expenditure pursuant to this chapter.
(d)Not more than 2 percent of the funds annually deposited in the Covered Electronic Waste Recovery Recycling Fee Subaccount and not more than 2 percent of the funds annually deposited in the Covered Battery-Embedded Waste Recycling Fee Subaccount shall be expended for purposes of establishing the public information program to educate the public in the hazards of improper covered electronic device storage and disposal and on the opportunities to recycle covered electronic devices.
(e)CalRecycle shall adopt regulations specifying cancellation methods for the recovery, processing, or recycling of covered electronic waste.
(f)CalRecycle may pay an electronic waste recycling payment or electronic waste recovery payment only for covered electronic waste that meets all of the following conditions:
(1)(A)The covered electronic waste is demonstrated to have been generated by a person who used the covered electronic device while located in this state.
(B)Covered electronic waste generated outside of the state and subsequently brought into the state is not eligible for payment.
(C)CalRecycle shall establish documentation requirements for purposes of this paragraph that are necessary to demonstrate that the covered electronic waste was generated in the state and eligible for payment.
(2)The covered electronic waste, including any residuals from the processing of the waste, is handled in compliance with all applicable statutes and regulations.
(3)The manufacturer or the authorized collector or recycler of the electronic waste provides a cost-free and convenient opportunity to recycle electronic waste, in accordance with the legislative intent specified in subdivision (b) of Section 42461.
(4)If the covered electronic waste is processed, the covered electronic waste is processed in this state according to the cancellation method authorized by CalRecycle.
(g)The Legislature hereby declares that the state is a market participant in the business of the recycling of covered electronic waste for all of the following reasons:
(1)The covered electronic waste recycling fee or the covered battery-embedded waste recycling fee, as applicable, are collected from the states consumers for covered electronic devices sold for use in the state.
(2)The purpose of the covered electronic waste recycling fee and the covered battery-embedded waste recycling fee and subsequent payments is to prevent damage to the public health and the environment from waste generated in the state.
(3)The recycling system funded by the covered electronic waste recycling fee and the covered battery-embedded waste recycling fee ensures that economically viable and sustainable markets are developed and supported for recovered materials and components in order to conserve resources and maximize business and employment opportunities within the state.
(h)(1)CalRecycle may make a payment to a manufacturer that takes back a covered electronic device from a consumer in this state for purposes of recycling the device at a processing facility. The amount of the payment made by CalRecycle shall equal the value of the covered electronic waste recycling fee or the covered battery-embedded waste recycling fee, as applicable, paid for that device. To qualify for a payment pursuant to this subdivision, the manufacturer shall demonstrate both of the following to CalRecycle:
(A)The covered electronic device for which payment is claimed was used in this state.
(B)The covered electronic waste for which a payment is claimed, including any residuals from the processing of the waste, has been, and will be, handled in compliance with all applicable statutes and regulations.
(2)A covered electronic device for which a payment is made under this subdivision is not eligible for an electronic waste recovery payment or an electronic waste recycling payment under Section 42479.
SEC. 5.Section 42479 of the Public Resources Code is amended to read:42479.(a)(1)For covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on and after January 1, 2005, for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on or after January 1, 2026, and for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on or after January 1, 2028, CalRecycle shall make electronic waste recovery payments and electronic waste recycling payments for the collection and recycling of covered e-waste to an authorized collector or covered e-waste recycler, respectively, upon completion of the review by CalRecycle of a payment claim submitted to CalRecycle by the authorized collector or e-waste recycler in the form and manner determined by CalRecycle. CalRecycle may examine a payment claim for a period of not more than 90 days from the date of receipt of the payment claim to validate the claims completeness, accuracy, truthfulness, and compliance with applicable laws and regulations. All of the following shall be considered official records for purposes of Section 1280 of the Evidence Code:
(A)The results of a payment claim review or subsequent payment claim audit.
(B)Written information compiled by CalRecycle during a claim review or subsequent claim audit.
(2)To the extent authorized by Section 42477, a covered e-waste recycler shall make the electronic waste recovery payments to an authorized collector upon receipt of a completed and verified invoice submitted to the recycler by the authorized collector in the form and manner determined by CalRecycle.
(b)A covered e-waste recycler is eligible for a payment pursuant to this section only if the covered e-waste recycler meets all of the following requirements:
(1)The covered e-waste recycler is in compliance with applicable requirements of Article 6 (commencing with Section 66273.70) of Chapter 23 of Division 4.5 of Title 22 of the California Code of Regulations.
(2)The covered e-waste recycler demonstrates to CalRecycle that a facility utilized by the covered e-waste recycler for the handling, processing, refurbishment, or recycling of covered electronic devices meets all of the following standards:
(A)The facility has been inspected by DTSC within the past 12 months and had been found to be operating in conformance with all applicable laws, regulations, and ordinances.
(B)The facility is accessible during normal business hours for unannounced inspections by state or local agencies.
(C)The facility has health and safety, employee training, and environmental compliance plans and certifies compliance with the plans.
(D)The facility meets or exceeds the standards specified in Chapter 1 (commencing with Section 1171) of Part 4 of Division 2 of, Division 4 (commencing with Section 3200) of, and Division 5 (commencing with Section 6300) of, the Labor Code or, if all or part of the work is to be performed in another state, the equivalent requirements of that state.
(c)CalRecycle may conduct a selective audit of authorized collectors, covered e-waste recyclers, or manufacturers receiving payments from CalRecycle to determine whether electronic waste recovery payments, electronic waste recycling payments, or payments to manufacturers are being paid by CalRecycle according to the requirements of this chapter and the regulations adopted pursuant to this chapter. CalRecycle collect and recover from authorized collectors, covered e-waste recyclers, or manufacturers, with interest, any moneys improperly paid.
SEC. 6.Chapter 8.7 (commencing with Section 42499.6) is added to Part 3 of Division 30 of the Public Resources Code, to read:8.7.Non-Customer-Owned Solar Photovoltaic (PV) Module Recycling42499.6.(a)Except For purposes of this chapter, CalRecycle means the Department of Resources Recycling and Recovery.
(b)Except as provided in subdivision (c), (d), beginning January 1, 2028, a solar photovoltaic module shall be included in a plan that describes how the solar photovoltaic module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused. The plan shall identify a legitimate recycler, as described in Section 260.43 of Title 40 of the Code of Federal Regulations, membership in a national recycling program, or a comparable in-house recycling program, to be used or contracted with for the recycling of the solar photovoltaic module. The plan may also identify how the solar photovoltaic module will be refurbished and reused in the event that the solar photovoltaic module has remaining operating life.
(b)The department(c)CalRecycle shall develop guidelines for the plans described in subdivision (a). (b). The guidelines shall include selective auditing to be conducted by the department CalRecycle to ensure plans comply with the requirements in subdivision (a) (b) and other provisions to be included in the guidelines described therein. The department CalRecycle may delay development of all or part of the guidelines if it determines there is insufficient capacity to manage the requisite number of panels.
(c)(d)Subdivision (a) (b) shall not apply to a solar photovoltaic module that meets the definition of covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463.
SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
For purposes of this chapter, the following terms have the following meanings, unless the context clearly requires otherwise:
(a)Account means the Electronic Waste Recovery and Recycling Account created in the Integrated Waste Management Fund pursuant to Section 42476.
(b)Authorized collector means any of the following:
(1)A city, county, or district that collects covered electronic devices.
(2)A person or entity that is required or authorized by a city, county, or district to collect covered electronic devices pursuant to the terms of a contract, license, permit, or other written authorization.
(3)A nonprofit organization that collects or accepts covered electronic devices.
(4)A manufacturer or agent of the manufacturer that collects, consolidates, and transports covered electronic devices for recycling from consumers, businesses, institutions, and other generators.
(5)An entity that collects, handles, consolidates, and transports covered electronic devices and has filed applicable notifications with DTSC pursuant to Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(c)CalRecycle means the Department of Resources Recycling and Recovery. Recovery.
(d)CDTFA means the California Department of Tax and Fee Administration.
(e)Consumer means a person who purchases a new or refurbished covered electronic device in a transaction that is a retail sale or in a transaction to which a use tax applies pursuant to Part 1 (commencing with Section 6001) of Division 2 of the Revenue and Taxation Code.
(f)(1)Covered battery-embedded product means a product containing a battery from which the battery is not designed to be easily removed from the product by the user of the product with no more than commonly used household tools.
(2)Covered battery-embedded product does not include any of the following:
(A)A medical device, as defined in Section 321(h) of Title 21 of the United States Code, if either of the following applies:
(i)It is a Class I device as defined in Section 360c of Title 21 of the United States Code, and either of the following applies:
(I)It is a device described in Section 414.202 of Title 42 of the Code of Federal Regulations.
(II)Either of the following applies:
(ia)The device is predominantly used in a health care setting by a provider.
(ib)The device is predominantly prescribed by a health care provider.
(ii)It is a Class II or Class III device as defined in 360c of Title 21 of the United States Code.
(B)A covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g).
(C)An energy storage system, as defined in subdivision (a) of Section 2835 of the Public Utilities Code.
(D)An electronic nicotine delivery system, as defined in Section 375(7) of Title 15 of the United States Code.
(3)CalRecycle may consult with other state agencies to determine if a product meets the definition of a covered battery-embedded product.
(4)Covered battery-embedded waste recycling fee means the fee imposed for covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) pursuant to Article 3 (commencing with Section 42464).
(g)(1)Covered electronic device means either any of the following:
(A)Except as provided in paragraph (2), a video display device containing a screen greater than four inches, measured diagonally, that is identified in the regulations adopted by DTSC pursuant to subdivision (c) of Section 25214.10.1 of the Health and Safety Code.
(B)Any covered battery-embedded product, as defined in subdivision (f).
(C)A customer-owned solar PV module, as defined in subdivision (k).
(2)Covered electronic device, as defined in subparagraph (A) of paragraph (1), does not include any of the following:
(A)A video display device that is a part of a motor vehicle, as defined in Section 415 of the Vehicle Code, or any component part of a motor vehicle assembled by, or for, a vehicle manufacturer or franchised dealer, including replacement parts for use in a motor vehicle.
(B)A video display device that is contained within, or a part of a piece of industrial, commercial, or medical equipment, including monitoring or control equipment.
(C)A video display device that is contained within a clothes washer, clothes dryer, refrigerator, refrigerator and freezer, microwave oven, conventional oven or range, dishwasher, room air-conditioner, dehumidifier, or air purifier.
(D)An electronic device, on and after the date that it ceases to be a covered electronic device pursuant to subdivision (f) of Section 25214.10.1 of the Health and Safety Code.
(h)Covered electronic waste or covered e-waste means a covered electronic device that is discarded.
(i)Covered electronic waste recycling fee or covered e-waste recycling fee means the fee imposed for covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) pursuant to Article 3 (commencing with Section 42464).
(j)Covered electronic waste recycler or covered e-waste recycler means any of the following:
(1)A person who engages in the manual or mechanical separation of covered electronic devices to recover components and commodities contained therein for the purpose of reuse or recycling.
(2)A person who changes the physical or chemical composition of a covered electronic device, in accordance with the requirements of Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code and the regulations adopted pursuant to that chapter, by deconstructing, size reduction, crushing, cutting, sawing, compacting, shredding, or refining for purposes of segregating components, for purposes of recovering or recycling those components, and who arranges for the transport of those components to an end user.
(3)A manufacturer who meets any conditions established by this chapter and Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code for the collection or recycling of covered electronic waste.
(k)Customer-owned solar PV module means a solar photovoltaic module that is owned by the customer being directly served by that solar photovoltaic module and not otherwise covered by a service agreement that includes a plan described in Section 42499.6.
(k)(l)Director means the Director of Resources Recycling and Recovery.
(l)(m)Discarded has the same meaning as set forth in subdivision (b) of Section 25124 of the Health and Safety Code.
(m)(n)DTSC means the Department of Toxic Substances Control.
(n)(o)Electronic waste recovery payment means an amount established and paid by CalRecycle pursuant to Section 42477.
(o)(p)Electronic waste recycling payment means an amount established and paid by CalRecycle pursuant to Section 42478.
(p)(q)Hazardous material has the same meaning as set forth in Section 25501 of the Health and Safety Code.
(q)(r)(1)(A)Manufacturer means a person who manufactures a covered electronic device and who owns or is the exclusive licensee of the brand or trademark under which the covered electronic device is sold, offered for sale, or distributed in the state.
(B)If there is no person in the state who is the manufacturer for purposes of subparagraph (A), the manufacturer of the covered electronic device is the owner or licensee of a brand or trademark under which a covered electronic device is sold, offered for sale, or distributed in the state.
(C)If there is no person in the state who is the manufacturer for purposes of subparagraph (A) or (B), the manufacturer of the covered electronic device is the person who sells, offers for sale, or distributes the covered electronic device into the state for sale, offer for sale, or distribution in the state.
(2)For purposes of this chapter, the sale of a covered electronic device shall be deemed to occur in the state if the covered electronic device is delivered to the purchaser in the state.
(r)(s)Person means an individual, trust firm, joint stock company, business concern, and corporation, including, but not limited to, a government corporation, partnership, limited liability company, and association. Notwithstanding Section 40170, person also includes a city, county, city and county, district, commission, the state or a department, agency, or political subdivision thereof, an interstate body, and the United States and its agencies and instrumentalities to the extent permitted by law.
(s)(t)Recycling has the same meaning as set forth in subdivision (a) of Section 25121.1 of the Health and Safety Code.
(t)(u)(1)Refurbished, when used to describe a covered electronic device, other than one defined in subparagraph (C) of paragraph (1) of subdivision (g), means a device that the manufacturer has tested and returned to a condition that meets factory specifications for the device, has repackaged, and has labeled as refurbished.
(u)(2)Refurbished, when used to describe a covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g), means a device that the manufacturer or a third party has tested and returned to a condition that meets factory specifications for the device and has been labeled as refurbished.
(v)Retailer means a person who makes a retail sale of a new or refurbished covered electronic device. Retailer includes a manufacturer of a covered electronic device who sells that covered electronic device directly to a consumer through any means, including, but not limited to, a transaction conducted through a sales outlet, catalog, or the Internet, or any other similar electronic means.
(v)(w)(1)Retail sale has the same meaning as set forth in Section 6007 of the Revenue and Taxation Code.
(2)Retail sale does not include the sale of a covered electronic device that is temporarily stored or used in the state for the sole purpose of preparing the covered electronic device for use thereafter solely outside the state, and that is subsequently transported outside the state and thereafter used solely outside the state.
(w)(x)Vendor means a person that makes a sale of a covered electronic device for the purpose of resale to a retailer who is the lessor of the covered electronic device to a consumer under a lease that is a continuing sale and purchase pursuant to Part 1 (commencing with Section 6001) of Division 2 of the Revenue and Taxation Code.
(x)(y)Video display device means an electronic device with an output surface that displays, or is capable of displaying, moving graphical images or a visual representation of image sequences or pictures, showing a number of quickly changing images on a screen in fast succession to create the illusion of motion, including, if applicable, a device that is an integral part of the display, in that it cannot be easily removed from the display by the consumer, that produces the moving image on the screen. A video display device may use, but is not limited to, a cathode ray tube (CRT), liquid crystal display (LCD), gas plasma, digital light processing, or other image projection technology.
SEC. 2.Section 42464 of the Public Resources Code is amended to read:42464.(a)On and after January 1, 2005, or as otherwise provided by Section 25214.10.1 of the Health and Safety Code, a consumer shall pay a covered electronic waste recycling fee upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 in the following amounts:
(1)Six dollars ($6) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size of less than 15 inches measured diagonally.
(2)Eight dollars ($8) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size greater than or equal to 15 inches but less than 35 inches measured diagonally.
(3)Ten dollars ($10) for each covered electronic device, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, with a screen size greater than or equal to 35 inches measured diagonally.
(b)(1)On and after January 1, 2026, a consumer shall pay a covered battery-embedded waste recycling fee in an amount determined by CalRecycle pursuant to paragraph (3) upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(2)Beginning on August 1, 2028, CalRecycle, in collaboration with DTSC, may establish more than one covered electronic waste recycling fee for covered battery-embedded waste recycling fee for covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, based on categories of covered battery-embedded products, as determined by CalRecycle in collaboration with DTSC.
(3)On or before October 1, 2025, and on or before October 1 each year thereafter, CalRecycle shall establish a covered electronic waste recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The fee shall be imposed upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463. The fee shall go into effect on January 1 of each calendar year after the fee is adopted. The maximum fee shall be adjusted annually based on the California Consumer Price Index as compiled and reported by the Department of Industrial Relations.
(c)(1)On and after January 1, 2028, a consumer or a service provider serving the consumer shall pay a covered solar PV recycling fee in an amount determined by CalRecycle pursuant to paragraph (2) upon the purchase of a new or refurbished covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463.
(2)On or before October 1, 2026, and on or before October 1 of each year thereafter, CalRecycle shall establish a covered solar PV recycling fee based on the reasonable regulatory costs to administer covered electronic waste recycling. The fee shall apply to the purchase of a new or refurbished covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463. The fee shall go into effect on January 1 of the year after the fee is adopted. The maximum fee shall be adjusted annually based on the California Consumer Price Index as compiled and reported by the Department of Industrial Relations.
(c)(d)Except as provided in subdivision (e), (f), a retailer shall collect from the consumer a covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, at the time of the retail sale of a covered electronic device.
(d)(e)(1)A retailer may retain 3 percent of the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, as reimbursement for all costs associated with collecting the fee and shall transmit the remainder of the fee to the state pursuant to Section 42464.4.
(2)If a retailer makes an election pursuant to paragraph (2) of subdivision (e), (f), and the conditions of subparagraphs (A), (B), and (C) of paragraph (2) of subdivision (e) (f) are met, the vendor, in lieu of the retailer, may retain 3 percent of the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, as reimbursement for all costs associated with collecting the fee and the vendor shall transmit the remainder of the fee to the state pursuant to Section 42464.4.
(e)(f)(1)If a retailer elects to pay the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on behalf of the consumer, the retailer shall provide an express statement to that effect on the receipt given to the consumer at the time of sale. If a retailer elects to pay the covered electronic waste recycling fee on behalf of the consumer, the fee is a debt owed by the retailer to the state, and the consumer is not liable for the fee.
(2)A retailer may elect to pay the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on behalf of the consumer by paying the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, to the retailers vendor, but only if all of the following conditions are met:
(A)The vendor is registered with CDTFA to collect and remit the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, pursuant to this chapter.
(B)The vendor holds a valid sellers permit pursuant to Article 2 (commencing with Section 6066) of Chapter 2 of Part 1 of Division 2 of the Revenue and Taxation Code.
(C)The retailer pays the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, to the vendor that is separately stated on the vendors invoice to the retailer.
(D)The retailer provides an express statement on the invoice, contract, or other record documenting the sale that is given to the consumer, that the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, has been paid on behalf of the consumer.
(3)For the purpose of making the election in paragraph (2), if the conditions set forth in subparagraphs (A), (B), (C), and (D) of paragraph (2), are met, the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, is a debt owed by the vendor to the state, and the retailer is not liable for the fee.
(f)(g)The retailer shall separately state the covered electronic waste recycling fee or covered battery-embedded waste recycling fee, as applicable, on the receipt given to the consumer at the time of sale.
(g)(h)On or before August 1, 2005, and, thereafter, no more frequently than annually, and no less frequently than biennially, CalRecycle, in collaboration with DTSC, shall review, at a public hearing, the covered electronic waste recycling fee outlined in subdivision (a) and shall make any adjustments to the fee to ensure that there are sufficient revenues in the Covered Electronic Waste Recycling Fee Subaccount to fund the covered electronic waste recycling program, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 and the resulting covered e-waste, established pursuant to this chapter. Adjustments to the fee that are made on or before August 1, shall apply to the calendar year beginning the following January 1. CalRecycle shall base an adjustment of the covered electronic waste recycling fees on both of the following factors:
(1)The sufficiency, and any surplus, of revenues in the Covered Electronic Waste Recycling Fee Subaccount to fund the collection, consolidation, and recycling of covered electronic waste resulting from covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste, that is projected to be recycled in the state.
(2)The sufficiency of revenues in the Covered Electronic Waste Recycling Fee Subaccount for CalRecycle and DTSC to administer, enforce, and promote the program established pursuant to this chapter, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 and the resulting covered e-waste, plus a prudent reserve not to exceed 5 percent of the amount in the Covered Electronic Waste Recycling Fee Subaccount.
(h)(i)Following the setting of the covered battery-embedded waste recycling fee pursuant to paragraph (3) of subdivision (b), on or before August 1, 2027, and, thereafter, no more frequently than annually, and no less frequently than biennially, CalRecycle, in collaboration with DTSC, shall review, at a public hearing, the covered battery-embedded waste recycling fee outlined in subdivision (b) and shall make any fair and reasonable adjustments to the fee to ensure that there are sufficient revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount to fund the covered electronic waste recycling program established pursuant to this chapter related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste. Adjustments to the fee that are made on or before August 1, shall apply to the calendar year beginning the following January 1. CalRecycle shall base an adjustment of the covered battery-embedded waste recycling fees on both of the following factors:
(1)The sufficiency, and any surplus, of revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount to fund the collection, consolidation, and recycling of covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, that is projected to be recycled in the state.
(2)The sufficiency of revenues in the Covered Battery-Embedded Waste Recycling Fee Subaccount for CalRecycle and DTSC to administer, enforce, and promote the program established pursuant to this chapter, related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and the resulting covered e-waste, plus a prudent reserve not to exceed 5 percent of the amount in the Covered Battery-Embedded Waste Recycling Fee Subaccount.
SEC. 3.Section 42464.2 of the Public Resources Code is amended to read:42464.2.CDTFA shall collect the covered electronic waste recycling fee and fee, the covered battery-embedded waste recycling fee fee, and the covered solar PV recycling fee pursuant to the Fee Collection Procedures Law (Part 30 (commencing with Section 55001) of Division 2 of the Revenue and Taxation Code). For purposes of this section, the reference in the Fee Collection Procedures Law to feepayer shall include a retailer, a consumer, and a vendor, in the case of a retailers election pursuant to paragraph (2) of subdivision (e) (f) of Section 42464.
SEC. 4.Section 42476 of the Public Resources Code is amended to read:42476.(a)The Electronic Waste Recovery and Recycling Account is hereby established in the Integrated Waste Management Fund. The Covered Electronic Waste Recycling Fee Subaccount and Subaccount, the Covered Battery-Embedded Waste Recycling Fee Subaccount Subaccount, and the Covered Solar PV Module Recycling Fee Subaccount are hereby created in the Electronic Waste Recovery and Recycling Account. All covered electronic waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Electronic Waste Recycling Fee Subaccount. All covered battery-embedded waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Battery-Embedded Waste Recycling Fee Subaccount. All covered electronic waste recycling fees collected from sales of covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, shall be deposited into the Covered Solar PV Module Recycling Fee Subaccount.
(1)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Electronic Waste Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered electronic waste recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463 pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers, for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(2)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Battery-Embedded Waste Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered battery-embedded waste recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(3)Notwithstanding Section 13340 of the Government Code, the funds in the Covered Solar PV Module Recycling Fee Subaccount are hereby continuously appropriated, without regard to fiscal year, for the following purposes:
(A)To pay refunds of the covered solar PV recycling fee imposed under Section 42464.
(B)To make electronic waste recovery payments to an authorized collector of covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(C)To make electronic waste recycling payments to covered electronic waste recyclers for recycling covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to Section 42479.
(D)To make payments to manufacturers for covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, pursuant to subdivision (h).
(b)(1)The money in the Covered Electronic Waste Recycling Fee Subaccount may be expended for the following purposes only upon appropriation by the Legislature in the annual Budget Act:
(A)For the administration of this chapter by CalRecycle and DTSC, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(B)To reimburse CDTFA for its administrative costs of registering, collecting, making refunds, and auditing retailers and consumers in connection with the covered electronic waste recycling fee imposed under Section 42464.
(C)To provide funding to DTSC to implement and enforce Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code, as related to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, as and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, including any regulations adopted by DTSC pursuant to that chapter, as that chapter relates to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(D)To establish the public information program specified in subdivision (d), as it relates to covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, and as related to covered electronic waste, resulting from discarded covered electronic devices, defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463.
(E)For expenditure pursuant to paragraph (2) of subdivision (a) of, and paragraph (2) of subdivision (b) of, Section 17001.
(2)The money in the Covered Battery-Embedded Waste Recycling Fee Subaccount may be expended solely for the following purposes only upon appropriation by the Legislature in the annual Budget Act:
(A)For the administration of this chapter by CalRecycle and DTSC, as related to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463 and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(B)To reimburse CDTFA for its administrative costs of registering, collecting, making refunds, and auditing retailers and consumers in connection with the covered battery-embedded waste recycling fee imposed under Section 42464.
(C)To provide funding to DTSC to implement and enforce Chapter 6.5 (commencing with Section 25100) of Division 20 of the Health and Safety Code, as it relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and as it relates to covered electronic waste resulting from discarded covered electronic devices, defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, including any regulations adopted by DTSC pursuant to that chapter, as that chapter relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463 and covered electronic waste resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(D)To establish the public information program specified in subdivision (d), as it relates to covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, and as it relates to covered electronic waste resulting from covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463.
(3)Any fines or penalties collected pursuant to this chapter shall be deposited in the Electronic Waste Penalty Subaccount, which is hereby established in the account. The funds in the Electronic Waste Penalty Subaccount may be expended by CalRecycle or DTSC only upon appropriation by the Legislature.
(c)Notwithstanding Section 16475 of the Government Code, any interest earned upon funds in the Electronic Waste Recovery and Recycling Account shall be deposited in that account for expenditure pursuant to this chapter.
(d)Not more than 2 percent of the funds annually deposited in the Covered Electronic Waste Recovery Recycling Fee Subaccount and not more than 2 percent of the funds annually deposited in the Covered Battery-Embedded Waste Recycling Fee Subaccount shall be expended for purposes of establishing the public information program to educate the public in the hazards of improper covered electronic device storage and disposal and on the opportunities to recycle covered electronic devices.
(e)CalRecycle shall adopt regulations specifying cancellation methods for the recovery, processing, or recycling of covered electronic waste.
(f)CalRecycle may pay an electronic waste recycling payment or electronic waste recovery payment only for covered electronic waste that meets all of the following conditions:
(1)(A)The covered electronic waste is demonstrated to have been generated by a person who used the covered electronic device while located in this state.
(B)Covered electronic waste generated outside of the state and subsequently brought into the state is not eligible for payment.
(C)CalRecycle shall establish documentation requirements for purposes of this paragraph that are necessary to demonstrate that the covered electronic waste was generated in the state and eligible for payment.
(2)The covered electronic waste, including any residuals from the processing of the waste, is handled in compliance with all applicable statutes and regulations.
(3)The manufacturer or the authorized collector or recycler of the electronic waste provides a cost-free and convenient opportunity to recycle electronic waste, in accordance with the legislative intent specified in subdivision (b) of Section 42461.
(4)If the covered electronic waste is processed, the covered electronic waste is processed in this state according to the cancellation method authorized by CalRecycle.
(g)The Legislature hereby declares that the state is a market participant in the business of the recycling of covered electronic waste for all of the following reasons:
(1)The covered electronic waste recycling fee or the covered battery-embedded waste recycling fee, as applicable, are collected from the states consumers for covered electronic devices sold for use in the state.
(2)The purpose of the covered electronic waste recycling fee and the covered battery-embedded waste recycling fee and subsequent payments is to prevent damage to the public health and the environment from waste generated in the state.
(3)The recycling system funded by the covered electronic waste recycling fee and the covered battery-embedded waste recycling fee ensures that economically viable and sustainable markets are developed and supported for recovered materials and components in order to conserve resources and maximize business and employment opportunities within the state.
(h)(1)CalRecycle may make a payment to a manufacturer that takes back a covered electronic device from a consumer in this state for purposes of recycling the device at a processing facility. The amount of the payment made by CalRecycle shall equal the value of the covered electronic waste recycling fee or the covered battery-embedded waste recycling fee, as applicable, paid for that device. To qualify for a payment pursuant to this subdivision, the manufacturer shall demonstrate both of the following to CalRecycle:
(A)The covered electronic device for which payment is claimed was used in this state.
(B)The covered electronic waste for which a payment is claimed, including any residuals from the processing of the waste, has been, and will be, handled in compliance with all applicable statutes and regulations.
(2)A covered electronic device for which a payment is made under this subdivision is not eligible for an electronic waste recovery payment or an electronic waste recycling payment under Section 42479.
SEC. 5.Section 42479 of the Public Resources Code is amended to read:42479.(a)(1)For covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (A) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on and after January 1, 2005, and for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (B) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on or after January 1, 2026, and for covered electronic waste, resulting from discarded covered electronic devices, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463, collected for recycling on or after January 1, 2028, CalRecycle shall make electronic waste recovery payments and electronic waste recycling payments for the collection and recycling of covered e-waste to an authorized collector or covered e-waste recycler, respectively, upon completion of the review by CalRecycle of a payment claim submitted to CalRecycle by the authorized collector or e-waste recycler in the form and manner determined by CalRecycle. CalRecycle may examine a payment claim for a period of not more than 90 days from the date of receipt of the payment claim to validate the claims completeness, accuracy, truthfulness, and compliance with applicable laws and regulations. All of the following shall be considered official records for purposes of Section 1280 of the Evidence Code:
(A)The results of a payment claim review or subsequent payment claim audit.
(B)Written information compiled by CalRecycle during a claim review or subsequent claim audit.
(2)To the extent authorized by Section 42477, a covered e-waste recycler shall make the electronic waste recovery payments to an authorized collector upon receipt of a completed and verified invoice submitted to the recycler by the authorized collector in the form and manner determined by CalRecycle.
(b)A covered e-waste recycler is eligible for a payment pursuant to this section only if the covered e-waste recycler meets all of the following requirements:
(1)The covered e-waste recycler is in compliance with applicable requirements of Article 6 (commencing with Section 66273.70) of Chapter 23 of Division 4.5 of Title 22 of the California Code of Regulations.
(2)The covered e-waste recycler demonstrates to CalRecycle that a facility utilized by the covered e-waste recycler for the handling, processing, refurbishment, or recycling of covered electronic devices meets all of the following standards:
(A)The facility has been inspected by DTSC within the past 12 months and had been found to be operating in conformance with all applicable laws, regulations, and ordinances.
(B)The facility is accessible during normal business hours for unannounced inspections by state or local agencies.
(C)The facility has health and safety, employee training, and environmental compliance plans and certifies compliance with the plans.
(D)The facility meets or exceeds the standards specified in Chapter 1 (commencing with Section 1171) of Part 4 of Division 2 of, Division 4 (commencing with Section 3200) of, and Division 5 (commencing with Section 6300) of, the Labor Code or, if all or part of the work is to be performed in another state, the equivalent requirements of that state.
(c)CalRecycle may conduct a selective audit of authorized collectors, covered e-waste recyclers, or manufacturers receiving payments from CalRecycle to determine whether electronic waste recovery payments, electronic waste recycling payments, or payments to manufacturers are being paid by CalRecycle according to the requirements of this chapter and the regulations adopted pursuant to this chapter. CalRecycle collect and recover from authorized collectors, covered e-waste recyclers, or manufacturers, with interest, any moneys improperly paid.
SEC. 6.Chapter 8.7 (commencing with Section 42499.6) is added to Part 3 of Division 30 of the Public Resources Code, to read:8.7.Non-Customer-Owned Solar Photovoltaic (PV) Module Recycling42499.6.(a)Except as provided in subdivision (c), beginning January 1, 2028, a solar photovoltaic module shall be included in a plan that describes how the solar photovoltaic module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused. The plan shall identify a legitimate recycler, as described in Section 260.43 of Title 40 of the Code of Federal Regulations, or a comparable in-house recycling program, to be used or contracted with for the recycling of the solar photovoltaic module. The plan may also identify how the solar photovoltaic module will be refurbished and reused in the event that the solar photovoltaic module has remaining operating life.
(b)The department shall develop guidelines for the plans described in subdivision (a). The guidelines shall include selective auditing to be conducted by the department to ensure plans comply with the requirements in subdivision (a) and other provisions to be included in the guidelines described therein. The department may delay development of all or part of the guidelines if it determines there is insufficient capacity to manage the requisite number of panels.
(c)Subdivision (a) shall not apply to a solar photovoltaic module that meets the definition of covered electronic device, as defined in subparagraph (C) of paragraph (1) of subdivision (g) of Section 42463.
SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
SECTION 1.Chapter 8.7 (commencing with Section 42499.6) is added to Part 3 of Division 30 of the Public Resources Code, to read:8.7.Solar Panels42499.6.(a)Pursuant to this chapter, a manufacturer of solar photovoltaic panels sold or offered for sale in this state shall develop an end-of-life management plan for the safe, convenient, and environmentally sound management and recycling of the solar photovoltaic panels it manufactured and their component materials.(b)A manufacturer may designate an agent to act on behalf of the manufacturer to develop an end-of-life management plan provided that the designated agent provides the department with written notice of the arrangement within 60 days of the start of the agency. The written notice shall identify the manufacturer, the agent, and the brand names and model numbers of the solar photovoltaic panels for which the agent is responsible for developing an end-of-life management plan. An agent shall provide the department written notice within 60 days of the termination, expiration, or modification of its agency with a manufacturer.(c)An end-of-life management plan shall include, but not be limited to, all of the following:(1)A plan to minimize the release of hazardous substances into the environment.(2)A plan to maximize recovery of components, including rare earth metals and other commercially valuable materials.(3)A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar photovoltaic panels in a manner consistent with paragraphs (1) and (2). For purposes of this paragraph, relevant stakeholders includes, but is not limited to, consumers, installers, building demolition firms, and recycling and treatment facilities.(4)Performance goals, including, but not limited to, a goal for the rate of combined reuse and recycling of collected solar photovoltaic panels as a percentage of the total weight of solar photovoltaic panels collected, which rate shall be no less than 85 percent.(d)The department shall develop guidelines for the development of end-of-life management plans.(e)A manufacturer or its agent, as described in subdivision (b), shall develop an end-of-life management plan for each model of solar photovoltaic panel it manufactures and sells or offers for sale in this state and submit it to the department for approval or disapproval, based on the plans compliance with this section and any regulations or guidelines adopted by the department pursuant to this section. The end-of-life management plan shall be submitted by July 1, 2026, and for solar photovoltaic panels first sold or offered for sale after July 1, 2026, the end-of-life management plan shall be submitted no later than 30 days after the solar photovoltaic panel is first sold or offered for sale in this state.(f)A manufacturer or its agent, as described in subdivision (b), may amend an end-of-life management plan provided the amended plan is submitted to the department for approval or disapproval.(g)A manufacturer shall implement an end-of-life management plan, as it is approved by the department.(h)Beginning January 1, 2027, and by January 1 of each year thereafter, a manufacturer or its agent, as described in subdivision (b), shall provide the department with a written report for the prior calendar year documenting the implementation of its end-of-life management plan and assessing the achievement of the performance goals contained in the plan.(i)The manufacturer shall pay the department an administrative fee as specified in paragraph (2) of subdivision (j).(j)(1)The department shall adopt regulations for the implementation of this chapter with an effective date of no later than January 1, 2026.(2)The regulations shall impose a fee on manufacturers of solar photovoltaic panels sold or offered for sale in the state in an amount that is sufficient to cover the departments full administrative and enforcement costs of the requirements of this chapter, including, but not limited to, program development costs and regulatory costs incurred by the department before any end-of-life management plan is submitted. Fee revenues collected pursuant to this section shall only be used to administer and enforce this chapter.(k)A manufacturer that violates any requirement of this section is liable for an administrative civil penalty of five hundred dollars ($500) for the first violation and one thousand dollars ($1,000) for a subsequent violation.(a)Pursuant to this chapter, a manufacturer of solar photovoltaic panels sold or offered for sale in this state shall develop an end-of-life management plan for the safe, convenient, and environmentally sound management and recycling of the solar photovoltaic panels it manufactured and their component materials.
(b)A manufacturer may designate an agent to act on behalf of the manufacturer to develop an end-of-life management plan provided that the designated agent provides the department with written notice of the arrangement within 60 days of the start of the agency. The written notice shall identify the manufacturer, the agent, and the brand names and model numbers of the solar photovoltaic panels for which the agent is responsible for developing an end-of-life management plan. An agent shall provide the department written notice within 60 days of the termination, expiration, or modification of its agency with a manufacturer.
(c)An end-of-life management plan shall include, but not be limited to, all of the following:
(1)A plan to minimize the release of hazardous substances into the environment.
(2)A plan to maximize recovery of components, including rare earth metals and other commercially valuable materials.
(3)A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar photovoltaic panels in a manner consistent with paragraphs (1) and (2). For purposes of this paragraph, relevant stakeholders includes, but is not limited to, consumers, installers, building demolition firms, and recycling and treatment facilities.
(4)Performance goals, including, but not limited to, a goal for the rate of combined reuse and recycling of collected solar photovoltaic panels as a percentage of the total weight of solar photovoltaic panels collected, which rate shall be no less than 85 percent.
(d)The department shall develop guidelines for the development of end-of-life management plans.
(e)A manufacturer or its agent, as described in subdivision (b), shall develop an end-of-life management plan for each model of solar photovoltaic panel it manufactures and sells or offers for sale in this state and submit it to the department for approval or disapproval, based on the plans compliance with this section and any regulations or guidelines adopted by the department pursuant to this section. The end-of-life management plan shall be submitted by July 1, 2026, and for solar photovoltaic panels first sold or offered for sale after July 1, 2026, the end-of-life management plan shall be submitted no later than 30 days after the solar photovoltaic panel is first sold or offered for sale in this state.
(f)A manufacturer or its agent, as described in subdivision (b), may amend an end-of-life management plan provided the amended plan is submitted to the department for approval or disapproval.
(g)A manufacturer shall implement an end-of-life management plan, as it is approved by the department.
(h)Beginning January 1, 2027, and by January 1 of each year thereafter, a manufacturer or its agent, as described in subdivision (b), shall provide the department with a written report for the prior calendar year documenting the implementation of its end-of-life management plan and assessing the achievement of the performance goals contained in the plan.
(i)The manufacturer shall pay the department an administrative fee as specified in paragraph (2) of subdivision (j).
(i)(j)(1)The department shall adopt regulations for the implementation of this chapter with an effective date of no later than January 1, 2026.
(2)The regulations shall impose a fee on manufacturers of solar photovoltaic panels sold or offered for sale in the state in an amount that is sufficient to cover the departments full administrative and enforcement costs of the requirements of this chapter, including, but not limited to, program development costs and regulatory costs incurred by the department before any end-of-life management plan is submitted. Fee revenues collected pursuant to this section shall only be used to administer and enforce this chapter.
(j)(k)A manufacturer that violates any requirement of this section is liable for an administrative civil penalty of five hundred dollars ($500) for the first violation and one thousand dollars ($1,000) for a subsequent violation.
(a)Pursuant to this chapter, a manufacturer of solar photovoltaic panels sold or offered for sale in this state shall develop an end-of-life management plan for the safe, convenient, and environmentally sound management and recycling of the solar photovoltaic panels it manufactured and their component materials.
(b)A manufacturer may designate an agent to act on behalf of the manufacturer to develop an end-of-life management plan provided that the designated agent provides the department with written notice of the arrangement within 60 days of the start of the agency. The written notice shall identify the manufacturer, the agent, and the brand names and model numbers of the solar photovoltaic panels for which the agent is responsible for developing an end-of-life management plan. An agent shall provide the department written notice within 60 days of the termination, expiration, or modification of its agency with a manufacturer.
(c)An end-of-life management plan shall include, but not be limited to, all of the following:
(1)A plan to minimize the release of hazardous substances into the environment.
(2)A plan to maximize recovery of components, including rare earth metals and other commercially valuable materials.
(3)A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar photovoltaic panels in a manner consistent with paragraphs (1) and (2). For purposes of this paragraph, relevant stakeholders includes, but is not limited to, consumers, installers, building demolition firms, and recycling and treatment facilities.
(4)Performance goals, including, but not limited to, a goal for the rate of combined reuse and recycling of collected solar photovoltaic panels as a percentage of the total weight of solar photovoltaic panels collected, which rate shall be no less than 85 percent.
(d)The department shall develop guidelines for the development of end-of-life management plans.
(e)A manufacturer or its agent, as described in subdivision (b), shall develop an end-of-life management plan for each model of solar photovoltaic panel it manufactures and sells or offers for sale in this state and submit it to the department for approval. approval or disapproval, based on the plans compliance with this section and any regulations or guidelines adopted by the department pursuant to this section. The end-of-life management plan shall be submitted by July 1, 2026, and for solar photovoltaic panels first sold or offered for sale after July 1, 2026, the end-of-life management plan shall be submitted no later than 30 days after the solar photovoltaic panel is first sold or offered for sale in this state.
(f)A manufacturer or its agent, as described in subdivision (b), may amend an end-of-life management plan provided the amended plan is submitted to the department for approval. approval or disapproval.
(g)A manufacturer shall implement an end-of-life management plan, as it is approved by the department.
(h)Beginning January 1, 2027, and by January 1 of each year thereafter, a manufacturer or its agent, as described in subdivision (b), shall provide the department with a written report for the prior calendar year documenting the implementation of its end-of-life management plan and assessing the achievement of the performance goals contained in the plan.
(i)The department shall adopt regulations for the implementation of this chapter with an effective date of no later than January 1, 2026.
(j)A manufacturer that violates any requirement of this section is liable for an administrative civil penalty of five hundred dollars ($500) for the first violation and one thousand dollars ($1,000) for a subsequent violation.
(a)Pursuant to this chapter, a manufacturer of solar photovoltaic panels sold or offered for sale in this state shall develop an end-of-life management plan for the safe, convenient, and environmentally sound management and recycling of the solar photovoltaic panels it manufactured and their component materials.
(b)A manufacturer may designate an agent to act on behalf of the manufacturer to develop an end-of-life management plan provided that the designated agent provides the department with written notice of the arrangement within 60 days of the start of the agency. The written notice shall identify the manufacturer, the agent, and the brand names and model numbers of the solar photovoltaic panels for which the agent is responsible for developing an end-of-life management plan. An agent shall provide the department written notice within 60 days of the termination, expiration, or modification of its agency with a manufacturer.
(c)An end-of-life management plan shall include, but not be limited to, all of the following:
(1)A plan to minimize the release of hazardous substances into the environment.
(2)A plan to maximize recovery of components, including rare earth metals and other commercially valuable materials.
(3)A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar photovoltaic panels in a manner consistent with paragraphs (1) and (2). For purposes of this paragraph, relevant stakeholders includes, but is not limited to, consumers, installers, building demolition firms, and recycling and treatment facilities.
(4)Performance goals, including, but not limited to, a goal for the rate of combined reuse and recycling of collected solar photovoltaic panels as a percentage of the total weight of solar photovoltaic panels collected, which rate shall be no less than 85 percent.
(d)The department shall develop guidelines for the development of end-of-life management plans.
(e)A manufacturer or its agent, as described in subdivision (b), shall develop an end-of-life management plan for each model of solar photovoltaic panel it manufactures and sells or offers for sale in this state and submit it to the department for approval. The end-of-life management plan shall be submitted by July 1, 2026, and for solar photovoltaic panels first sold or offered for sale after July 1, 2026, the end-of-life management plan shall be submitted no later than 30 days after the solar photovoltaic panel is first sold or offered for sale in this state.
(f)A manufacturer or its agent, as described in subdivision (b), may amend an end-of-life management plan provided the amended plan is submitted to the department for approval.
(g)A manufacturer shall implement an end-of-life plan, as it is approved by the department.
(h)Beginning January 1, 2027, and by January 1 of each year thereafter, a manufacturer or its agent, as described in subdivision (b), shall provide the department with a written report for the prior calendar year documenting the implementation of its end-of-life management plan and assessing the achievement of the performance goals contained in the plan.
(i)The department shall adopt regulations for the implementation of this chapter with an effective date of no later than January 1, 2026.
SECTION 1.(a)The Legislature finds and declares the following:(1)Solar photovoltaic (PV) deployment has grown at unprecedented rates since the early 2000s. In the last decade alone, solar has experienced an average annual growth rate of 33 percent.(2)Thanks to strong federal policies like the solar investment tax credit, rapidly declining costs, and increasing demand across the private and public sector for clean electricity, there are now more than 130.9 gigawatts (GW) of solar capacity installed nationwide, enough to power 23,000,000 homes.(3)California has been and continues to be a leader in the national transition to solar energy. In 2021, California produced 32 percent, or 28,000 megawatts, of the nations total solar PV electricity generation, more than any other state.(4)As the PV market increases, so will the volume of decommissioned PV panels. Given an average panel lifetime of 30 years, large amounts of annual waste are anticipated by the early 2030s. According to the International Renewable Energy Agency (IRENA), by 2030, the United States is expected to have as much as 1,000,000 total tons of solar panel waste. By 2050, the United States is expected to have the second largest number of end-of-life panels in the world, with as many as an estimated 10,000,000 total tons of panels.(5)Hazardous waste testing on solar panels in the marketplace has indicated that different varieties of solar panels have different metals present in the semiconductor and solder. Some of these metals, like lead and cadmium, are harmful to human health and the environment at high levels. If these metals are present in high enough quantities in the solar panels, solar panel waste could become harmful to the environment if improperly disposed of.(6)Growing PV panel waste presents not only a new environmental challenge, but also unprecedented opportunities to create value and pursue new economic avenues. These include recovery of raw material and the emergence of new solar PV end-of-life industries.(7)Sectors like PV recycling will be essential in Californias transition to a sustainable, economically viable, and increasingly renewable-based energy future. To unlock the benefits of those industries, the institutional groundwork needs to be laid in time to meet the expected surge in panel waste.(8)With the right conditions in place, end-of-life industries for solar PV can thrive as an important pillar of a sustainable solar industry in California.(b)It is the intent of the Legislature to enact future legislation that would create a convenient, safe, and environmentally sound system for the end-of-life management of PV modules, minimization of hazardous waste, and recovery of commercially valuable materials.(a)The Legislature finds and declares the following:
(1)Solar photovoltaic (PV) deployment has grown at unprecedented rates since the early 2000s. In the last decade alone, solar has experienced an average annual growth rate of 33 percent.
(2)Thanks to strong federal policies like the solar investment tax credit, rapidly declining costs, and increasing demand across the private and public sector for clean electricity, there are now more than 130.9 gigawatts (GW) of solar capacity installed nationwide, enough to power 23,000,000 homes.
(3)California has been and continues to be a leader in the national transition to solar energy. In 2021, California produced 32 percent, or 28,000 megawatts, of the nations total solar PV electricity generation, more than any other state.
(4)As the PV market increases, so will the volume of decommissioned PV panels. Given an average panel lifetime of 30 years, large amounts of annual waste are anticipated by the early 2030s. According to the International Renewable Energy Agency (IRENA), by 2030, the United States is expected to have as much as 1,000,000 total tons of solar panel waste. By 2050, the United States is expected to have the second largest number of end-of-life panels in the world, with as many as an estimated 10,000,000 total tons of panels.
(5)Hazardous waste testing on solar panels in the marketplace has indicated that different varieties of solar panels have different metals present in the semiconductor and solder. Some of these metals, like lead and cadmium, are harmful to human health and the environment at high levels. If these metals are present in high enough quantities in the solar panels, solar panel waste could become harmful to the environment if improperly disposed of.
(6)Growing PV panel waste presents not only a new environmental challenge, but also unprecedented opportunities to create value and pursue new economic avenues. These include recovery of raw material and the emergence of new solar PV end-of-life industries.
(7)Sectors like PV recycling will be essential in Californias transition to a sustainable, economically viable, and increasingly renewable-based energy future. To unlock the benefits of those industries, the institutional groundwork needs to be laid in time to meet the expected surge in panel waste.
(8)With the right conditions in place, end-of-life industries for solar PV can thrive as an important pillar of a sustainable solar industry in California.
(b)It is the intent of the Legislature to enact future legislation that would create a convenient, safe, and environmentally sound system for the end-of-life management of PV modules, minimization of hazardous waste, and recovery of commercially valuable materials.
|
Date
|
Status
|
|---|---|
| Sep 1, 2023 | In committee: Held under submission. |
| Aug 14, 2023 | In committee: Referred to APPR suspense file. |
| Jul 12, 2023 | From committee: Do pass and re-refer to Com. on APPR. (Ayes 5. Noes 0.) (July 12). Re-referred to Com. on APPR. |
| Jun 28, 2023 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on E.Q. |
| Jun 28, 2023 | In committee: Set, first hearing. Hearing canceled at the request of author. |
| Jun 22, 2023 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on E.Q. |
| Jun 7, 2023 | Referred to Com. on E.Q. |
| May 26, 2023 | In Senate. Read first time. To Com. on RLS. for assignment. |
| May 25, 2023 | Read third time. Passed. Ordered to the Senate. (Ayes 66. Noes 4. Page 1775.) |
| May 22, 2023 | Read second time. Ordered to third reading. |
| May 18, 2023 | Read second time and amended. Ordered returned to second reading. |
| May 18, 2023 | From committee: Amend, and do pass as amended. (Ayes 12. Noes 2.) (May 18). |
| May 10, 2023 | In committee: Set, first hearing. Referred to APPR. suspense file. |
| Apr 27, 2023 | Re-referred to Com. on APPR. |
| Apr 26, 2023 | Read second time and amended. |
| Apr 25, 2023 | From committee: Amend, and do pass as amended and re-refer to Com. on APPR. (Ayes 10. Noes 0.) (April 24). |
| Mar 29, 2023 | From committee: Do pass and re-refer to Com. on NAT. RES. (Ayes 8. Noes 0.) (March 28). Re-referred to Com. on NAT. RES. |
| Mar 20, 2023 | Re-referred to Com. on E.S. & T.M. |
| Mar 16, 2023 | From committee chair, with author's amendments: Amend, and re-refer to Com. on E.S. & T.M. Read second time and amended. |
| Mar 16, 2023 | Referred to Coms. on E.S. & T.M. and NAT. RES. |
| Dec 6, 2022 | From printer. May be heard in committee January 5. |
| Dec 5, 2022 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 14, 2023 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Jul 12, 2023 | Do pass, but first be re-referred to the Committee on [Appropriations] | Senate Standing Committee on Environmental Quality |
Passed |
|
| May 25, 2023 | AB 2 Ward Assembly Third Reading | Assembly Floor |
Passed |
|
| May 18, 2023 | Do pass as amended. | Assembly Standing Committee on Appropriations |
Passed |
|
| Apr 24, 2023 | Do pass as amended and be re-referred to the Committee on [Appropriations] | Assembly Standing Committee on Natural Resources |
Passed |
|
| Mar 28, 2023 | Do pass and be re-referred to the Committee on [Natural Resources] | Assembly Standing Committee on Environmental Safety and Toxic Materials |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| Californians Against Waste | ** Support | |
| California Product Stewardship Council | ** Support | |
| California Solar & Storage Association | ** Support |
SENATE COMMITTEE ON APPROPRIATIONS
Senator Anthony Portantino, Chair
2023 - 2024 Regular Session
AB 2 (Ward) - Recycling: solar photovoltaic modules
Version: June 28, 2023 | Policy Vote: E.Q. 5 - 0 |
Urgency: No | Mandate: Yes |
Hearing Date: August 14, 2023 | Consultant: Ashley Ames |
Bill Summary:
This bill would add customer-owned solar panels to the existing electronic waste recycling program, establish a recycling fee on covered solar panels, and require solar panels not owned by customers to be included in an end-of-life plan.
Fiscal Impact:
- The Department of Resources Recycling and Recovery (CalRecycle) estimates one-time costs of about $2 million each year in 2024-25 and 2025-26 (General Fund or Covered Solar PV Module Recycling Fund) for 14 positions to promulgate regulations, develop guidelines, and receive written notices. CalRecycle also estimates ongoing annual costs of $3.3 million beginning in 2026-27 for 23 positions to review plans and reports and to provide ongoing assistance. CalRecycle notes that this bill as currently written would provide the department with only limited enforcement authority, and therefore its estimate does not include enforcement costs.
- The Department of Toxic Substances Control (DTSC) estimates ongoing costs of $2.4 million (General Fund or Covered Solar PV Module Recycling Fund) for 12 positions to conduct annual inspections, provide process management and oversight, and enforce the bill’s provisions.
- Unknown, potentially significant costs (Covered Solar PV Module Recycling Fund) for the California Department of Tax and Fee Administration to start collecting the fee from solar panel customers.
Background:
California has established an ambitious path toward solar energy deployment, aiming for 100% clean energy, including solar, by 2045. To reach this goal, the state has enacted various policies and laws to foster residential and commercial solar energy development. Key initiatives include the 1978 Solar Energy Development Act, targeting 20% solar energy by 2020; the 2006 Solar Initiative, offering incentives for solar panel installations; the 2018 Self-Generation Incentive Program (SGIP), promoting self-generated electricity, including from solar; and AB 1414 (Friedman, Chapter 849, Statutes of 2017), requiring new homes to have proper infrastructure for solar installation. As a result, about 1.5 million homes and businesses have installed rooftop solar systems. California leads the nation in solar power generation, accounting for approximately 13% of the state's electricity in 2018. The burgeoning solar industry supports a growing number of businesses and jobs, with 403 manufacturers, 1103 installers/developers, and 874 other solar-related businesses recorded in the first quarter of 2023.
End-of-life solar panels. According to a 2020 report by SEIA, there are an estimated 100,000 metric tons of solar panels in landfills in the United States. The majority of these panels are located in California, which has the largest solar market in the country. These numbers will grow at an increasing rate to reflect the increase in solar panel deployment over the last decades. The SEIA report estimates that between 200,000 and 300,000 metric tons of solar panels will reach the end of their lifespan and be headed to landfills in the next ten years.
Extended producer responsibility (EPR). EPR refers to a waste management strategy that makes the manufacturer of a product responsible for the products’ entire life–cycle costs including its end–of–life costs associated with recycling or disposal. These costs have traditionally been borne by local governments (and ultimately tax payers) through municipal waste disposal programs. This traditional structure results in an “externality” or a situation where the costs of recycling or disposal are not paid by the buyer or seller of the product, but rather by a third party (such as tax payers). EPR shifts the costs of managing a product at its end of life from waste disposal programs to the manufacturer of the product. By requiring manufacturers to cover end–of–life costs, these costs are incorporated or “internalized” into the total cost of the product when it is sold. Therefore, the price that consumers pay reflects the entire cost of the product—its production and disposal. This means that the people making and using the product cover all of its costs, rather than local governments and taxpayers covering a share of disposal costs. Moreover, manufacturers have a financial incentive to design products that are inexpensive to recycle. In California, EPR is already used for carpet, mattresses, and paint.
Mixed results for California EPR programs. To date, the Legislature has enacted four EPR programs of which CalRecycle has enforcement authority – paint, carpet, mattresses, and pharmaceutical and sharps waste – showing varying degrees of success. While CalRecycle does not appear to have oversight issues with the paint stewardship program, CalRecycle was subject to an audit for its oversight of the mattress recycling program. The carpet recycling program has encountered the most challenges of the EPR programs with the enforcement history of the carpet stewardship organization being extensive and complicated. Only enacted in 2018, the pharmaceutical and sharps waste program is still in development.
Existing Solar Panel Management Policies. In 2017, Washington State passed legislation that established an EPR program for solar PV modules. Under this law, manufacturers or other producers of solar panels are responsible for developing and implementing a stewardship plan that, among other things, sets a combined reuse and recycling rate of at least 85% by weight of solar PVs. The program will begin July 1, 2025. Washington is the first state in the nation to develop an EPR program for solar panels. In the European Union, regulations have required an 85% collection and 80% recycling rate of the materials used in PVs under the Waste Electrical and Electronic Equipment Directive since 2012.
Proposed Law:
This bill would add consumer-owned solar panels to the existing electronic waste recycling program, establish a recycling fee on covered solar panels, and require solar panels not owned by customers to be included in an end-of-life plan. Specifically, this bill would:
- Add customer-owned solar photovoltaic (PV) modules as a covered electronic device under the Electronic Waste Recycling Act.
- Require CalRecycle to establish a covered solar PV recycling fee by October 1, 2026 and adjust the fee on or before October 1 of every year based on the Consumer Price Index in order to cover the regulatory and administrative costs of covered electronic waste recycling.
- Require consumers to pay the fee on the purchase of a new or refurbished covered solar PV module product.
- Require noncustomer-owned solar PV modules be included in a plan that describes how the module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused by January 1, 2028.
- Require CalRecycle to develop guidelines for the development of the plan, and adopt regulations to implement the bill by January 1, 2026.
- Require that all records provided to CalRecycle pursuant to these provisions be under penalty of perjury.
Related Legislation:
AB 1215 (Newman, Chapter 370, Statutes of 2022) expanded the Electronic Waste Recycling Act to include battery-embedded products.
AB 2440 (Irwin, Chapter 351, Statutes of 2022) required producers of covered batteries, as defined, to establish a stewardship program for the collection and recycling of covered batteries.
SB 244 (Archuleta, 2021) would have required CalRecycle, in consultation with DTSC, to develop guidance for the proper handling and disposal of lithium-ion batteries and would have required the Department of Forestry and Fire Protection to develop protocols and training for the detection, safe-handling, and suppression of fires started from discarded lithium-ion batteries in the waste-handling system to be adopted by solid waste enterprises. SB 244 was vetoed by the Governor.
Staff Comments:
CalRecycle notes that this bill as currently written would provide limited enforcement authority, and therefore its estimate does not include enforcement costs. Any amendments that add or expand CalRecycle’s enforcement authority could result in higher costs. As noted in the Senate Environmental Quality Committee analysis, this bill does not have an enforcement mechanism to ensure that the end-of-life management plans for non-customer-owned solar panels are actually developed, that they align with the plans developed in CalRecycle’s guidelines, or that they are implemented. While CalRecycle is authorized to develop guidelines for writing a plan, and this includes selective auditing by the department, it is unclear what entities CalRecycle would be auditing, what rubric CalRecycle would bring to inform the audit, or what the consequence would result if an audit found plans lacking. Without this enforcement mechanism, there is no way of ensuring that the provisions in the bill will be followed or that the policy goals of the measure will be achieved. As there is currently no requirement that the plans be implemented, the process for enforcing such a requirement is also not stipulated.
CalRecycle also notes that this bill would not establish a traditional EPR program, as its structure is open-ended and would allow manufactures to develop their own end-of-life plans. This issue is discussed in greater detail in the Senate Environmental Quality Committee analysis.
DTSC notes that, as currently written, the bill does not include provisions that would provide funding from the Covered Solar PV Module Recycling Fund to DTSC to implement and enforce these provisions. Absent an appropriation from the Fund, DTSC would have to absorb this workload within HWCA. The HWCA is predominantly funded by the Generation and Handling (G&H) Fee. The Board of Environmental Safety annually sets the G&H Fee rate equal to the DTSC’s level of appropriation within specified statutory caps. As a result, DTSC cannot specify the exact rate increase the implementation of this bill may result in. However, based on the current rate an increased appropriation of approximately $2.4 million would result in an increase of $2-4 per ton.
-- END –
SENATE COMMITTEE ON ENVIRONMENTAL QUALITY
Senator Allen, Chair
2023 - 2024 Regular
Bill No. | AB 2 | Hearing Date: | 7/12/2023 |
Author: | Ward | ||
Version: | 06/28/2023 | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | Brynn Cook | ||
SUBJECT: Recycling: solar photovoltaic modules
DIGEST: This bill adds consumer-owned solar panels as a covered product under the Electronic Waste Recycling Act of 2003 and establishes a fee on consumers to achieve the safe end-of-life of these panels. The bill also requires that solar panels that are not consumer-owned be part of a solar panel end-of-life plan.
ANALYSIS:
Existing law:
- The California Integrated Waste Management Act (IWMA) of 1989, administered by the Department of Resources Recycling and Recovery (CalRecycle), generally regulates the disposal, management, and recycling of solid waste. (Public Resources Code (PRC) §§ 40000 et. seq.) Among other things, the act:
- Establishes state recycling goal that 75% of solid waste generated is to be diverted from landfill disposal through source reduction, recycling, and composting by 2020. (PRC § 41780.01)
- Establishes extended producer responsibility (EPR) programs for various products, including, among others, carpet, mattresses, and pharmaceutical and sharps waste. (PRC §§ 40000 et. seq.)
- Pursuant to the Electronic Waste Recycling Act of 2003 (Act) (PRC §§ 42476 et seq.):
- Establishes processes for consumers to return, recycle, and ensure the safe and environmentally sound disposal of video display devices that are hazardous wastes when discarded.
- Requires fees collected on covered products to be deposited in the Electronic Waste Recovery and Recycling Account for covered electronic waste recycling fee refunds and making electronic waste recovery and recycling payments.
- Requires manufacturers of covered electronic devices to submit a report to CalRecycle that describes where and how to return, recycle, and dispose of the covered product.
- Requires 60% of total retail sales of electricity in California to be generated from eligible renewable energy resources, including solar, by December 31, 2030, and creates the policy of planning to meet all of the state’s retail electricity supply with a mix of renewable and zero-carbon resources, as specified, by December 31, 2045. (Public Utilities Code (PUC) § 399.11 et seq.)
- Requires, by December 31, 2030, 50% of total retail sales of electricity in California to be generated from eligible renewable energy resources, including from solar energy. (PUC § 399.11-399.32)
This bill:
- Adds customer-owned solar photovoltaic (PV) modules as a covered electronic device under the Electronic Waste Recycling Act.
- Requires CalRecycle to establish a covered solar PV recycling fee by October 1, 2026, to cover the regulatory and administrative costs of covered electronic waste recycling. This fee will be put on consumers and CalRecycle will adjust the fee on or before October 1 of every year based on the Consumer Price Index.
- Requires noncustomer-owned solar PV modules be included in a plan that describes how the module will be managed at the end of its useful life, who is responsible for managing it, and how it will be recycled, refurbished, or reused by January 1, 2028.
- Requires CalRecycle to develop guidelines for the development of the plan, and adopt regulations to implement the bill by January 1, 2026.
- Requires all records provided to CalRecycle under the provisions of this act be provided under penalty of perjury.
Background
- California’s waste goals and EPR. Under the IWMA, CalRecycle is tasked with reducing the amount of waste that gets landfilled in California. The IWMA establishes a goal that 75% of solid waste generated in the state be diverted from landfills through source reduction, recycling, and composting by 2020. However, in 2021, the state’s recycling rate was just 41%, falling far short of the state’s goal.
To advance California’s recycling goals, the Legislature has directed CalRecycle to establish several EPR programs. EPR is a strategy that places shared responsibility for end-of-life product management on producers and all entities involved in the product chain, instead of on the general public and local governments. EPR programs rely on industry, often via a product stewardship organization (PRO), to develop and implement approaches to create a circular economy with oversight and enforcement provided by the government. EPR programs have traditionally been used to improve the recapture and recycling rate for challenging-to-recycle materials that can pose a risk to the waste stream, like pharmaceuticals and sharps, paints, and batteries. The state also oversees EPR programs for high-volume products including mattresses, carpets, packaging, and single-use plastic food ware items.
- Solar by the Numbers. California has set ambitious goals for deploying solar energy. By 2045, the state aims to generate 100% of its electricity from clean energy sources, including solar. In pursuit of this goal, California has introduced numerous policies, including grants and rebate programs, to advance the deployment of residential and commercial solar energy. In 1978, the state passed the Solar Energy Development Act, which established a goal of generating 20% of the state's electricity from solar by 2020. In 2006, California passed the Solar Initiative, which provided a number of incentives for the installation of solar panels. These incentives helped to make solar panels more affordable and accessible and led to a surge in solar panel installations. In 2018, California passed the Self-Generation Incentive Program (SGIP), which provides financial incentives for homeowners and businesses to generate their own electricity, including from solar panels. In 2017, California passed AB 1414 (Friedman, Chapter 849, Statutes of 2017), which requires all new homes be constructed with the proper infrastructure for solar installation.
About 1.5 million homes and businesses have installed rooftop solar systems in California. California is the highest solar power generating state in the nation, with approximately 13% of the State’s electric generation coming from solar arrays in 2018 according to the California Energy Commission. The growing solar energy industry supports an increasing number of businesses and workers. According to the Solar Energy Industries Association (SEIA), there were 403 Manufacturers, 1103 Installers/Developers, 874 Other solar businesses in California in the first quarter of 2023.
- Solar Panels Incoming (to a Landfill Near You). According to a 2020 report by SEIA, there are an estimated 100,000 metric tons of solar panels in landfills in the United States. The majority of these panels are located in California, which has the largest solar market in the country. These numbers will grow at an increasing rate to reflect the increase in solar panel deployment over the last decades. The SEIA report estimates that between 200,000 and 300,000 metric tons of solar panels will reach the end of their lifespan and be headed to landfills in the next ten years, and the International Renewable Energy Agency (IRENA) estimates that by 2030, the United States is expected to have a million tons of solar panel waste.
- Solar Panels Waste Classification. On January 1, 2021, Department of Toxic Substances Control (DTSC) re-classified solar panels as universal waste instead of hazardous waste relaxing criteria on how solar panels can be handled in the waste stream. Universal wastes are hazardous wastes that are widely produced by households and many different types of businesses. Universal wastes include televisions, computers, other
electronic devices, batteries, fluorescent lamps, mercury thermostats, and other mercury-containing equipment, among others. Under the new universal waste requirements, solar panel handlers may accumulate solar PV panels for up to one year, while under the previous general hazardous waste requirements, handlers could only accumulate solar panels for 90 days (for large quantity generators). The longer accumulation period now allowed under law will allow handlers to transport the solar panels to destination facilities in bulk rather than on a more frequent basis. DTSC estimated that streamlining the regulations for collecting, recycling, and treating solar panels would result in cost savings of nearly $18 million per year. In addition, DTSC estimated the total statewide benefits from this regulation at more than $91 million. This estimate is partially based on e-recyclers expressing interest in expanding their businesses in light of solar panels being regulated as universal waste.
- Repair, Reuse, and Recycle. Solar panels can be repaired or reused to extend their life, or recycled, at the end of their life.
- Repair. Solar panels are typically sold under warranty, with a guarantee of 90% production at 10 years and 80% production at 25 years. During this time, and barring accidents, solar panels require very little maintenance, needing only cleaning to remove dirt and debris that could obstruct incoming sunlight. Currently, if a solar panel is damaged, it is typically not repaired, and instead is recycled or disposed of.
- Reuse. There is little data on the scale of the second-hand solar PV market. According to a report by Bloomberg, solar panels that are at the end or have surpassed their warranty in the US are sold to markets in other countries. While a number of businesses have emerged specifically in the reuse space, decommissioning solar installations and redirecting the used panels to other customers, the committee is not aware of any specific data on second-hand solar panel sales in California.
- Recycling. Although 80% of a typical photovoltaic panel is made of recyclable materials, disassembling them and recovering the glass, silver and silicon is extremely difficult. During recycling, the panels undergo a series of steps such as mechanical shredding, thermal treatment, and chemical processing to separate the materials. Silicon-based PV cells, containing high-purity silicon, are the most valuable component of the solar panel. Glass, constituting a significant portion of the panel, is also relatively valuable and recyclable. Estimates on the value of recovered material for solar panels range based on industry estimates from $2- $7. Currently, solar panel recycling options are limited: according to the California Solar Storage Association (CSSA) as of July 2022, California had just one recycling plant accepting solar panels.
6) Existing Solar Panel Management Policies. In 2017, Washington State passed legislation that established an EPR program for solar PV modules. Under this law, manufacturers or other producers of solar panels are responsible for developing and implementing a stewardship plan that, among other things, sets a combined reuse and recycling rate of at least 85% by weight of solar PVs. The program will begin July 1, 2025. Washington is the first state in the nation to develop an EPR program for solar panels.
In the European Union, regulations have required an 85% collection and 80% recycling rate of the materials used in PVs under the Waste Electrical and Electronic Equipment (WEEE) Directive since 2012.
Comments
- Purpose of Bill. According to the author, "In 2006, California launched the Million Solar Roofs Initiative to incentivize consumers and businesses to invest in solar. As of 2022, California has the largest solar market in the United States, supplying over 20% of its electricity. Unfortunately, given a 20-30 year life span, many of these panels are beginning to reach the end of their lifecycle. Assembly Bill (AB) 2 will establish the foundation for a convenient, safe, and environmentally sustainable system for the end-of-life management of solar photovoltaic (PV) panels. With the right conditions in place, end-of-life industries for PV panels can thrive as an important pillar of a sustainable solar industry in California."
- What’s the Plan? AB 2 would require solar panels that are not owned by consumers to have a safe end-of-life plan. However, the measure does not describe what strategies or information must go into such a plan, or what entity will be responsible for developing the plan. It also does not specify that the plan must be implemented, or put the onus of implementing the plan on any entity. The process and timelines by which the plan will be developed (and who will be at the table during that process) and evaluated are not provided in the bill, posing a challenge to implementation.
- What Goes into the Plan? AB 2 does not specify what kind of strategies or parameters must be considered when developing a safe end-of-life management plan for solar panels. A good end-of-life management plan would consider criteria such as how to:
- Prioritize reuse and then recycling of solar panels;
- Establish a high recapture rate of deployed solar panels;
- Establish a high recycling efficiency rate for solar panels;
- Minimize transportation and related emissions associated with the collection of solar panels;
- Identify a mechanism for successfully tracking solar panels through to the end of their life;
- Ensure there is a responsible party for stranded solar panels;
- Support business and labor in all aspects of recovery and recycling of solar panels;
- Establish enforceable and quantifiable goals; and
- Develop an education campaign to standardize procedures across stakeholders.
- What Goes into the Plan? AB 2 does not specify what kind of strategies or parameters must be considered when developing a safe end-of-life management plan for solar panels. A good end-of-life management plan would consider criteria such as how to:
AB 2 does not weigh in on these elements of the plan. Instead, it requires CalRecycle to develop guidelines on what should go into such a plan. While deferring to CalRecycle to develop guidelines based on their experience creates an opportunity to include data-informed nuance, it does not necessarily recognize or advance the policy goals of the Legislature.
- Who Develops the Plan? It is unclear in the current language what entity is responsible for developing the end-of-life management plan for non-consumer-owned solar panels. Manufacturers, owners, or other entities along the product chain may be responsible in part or in whole for these plans.
In addition, it is not clear whether individual responsible entities would develop their own plans, or whether there would be one plan developed by many responsible entities. Some EPR programs in California allow individual producers to develop their own plans. However, EPR programs also create PROs, comprised of numerous entities, to develop product stewardship plans. Establishing a PRO ensures that all responsible producers are at the table when developing the end-of-life management plan for a covered product.
If individual responsible entities are large and covered products do not change hands many times, authorizing those responsible entities to develop their own individual plans may be more tailored and efficient than working through a larger PRO. In the case of the solar industry in California, however, with hundreds of manufacturers and thousands of installers and solar adjacent businesses, requiring one plan per responsible entities may result in a plethora of plans that would need to be reviewed to ensure they are effective. There would also need to be a clear protocol for identifying the responsibility entity to prevent “gaps” where no one steps forward to develop a plan, or overlap, with multiple entities preparing a plan for the same solar panels.
- What Will the Plan Accomplish? Currently, there is no requirement that the plan developed pursuant to this measure would be implemented. Without this important specification, developing a plan is an important thought exercise, but is unlikely to accomplish policy goals that prioritize recycling or ensure the safe end of life of solar panels.
Given these uncertainties in the current language, the committee may wish to consider what entities should be responsible for developing a solar plan, what the primary policy objectives of such a plan could be, what requirements would fall on responsible entities to develop and implement these plans, and what enforcement mechanisms would be sufficient to ensure these goals are met.
- Enforcement Needed. AB 2 does not have an enforcement mechanism to ensure that the end-of-life management plans for non-customer-owned solar panels are actually developed, that they align with the plans developed in CalRecycle’s guidelines, or that they are implemented. While CalRecycle is authorized to develop guidelines for writing a plan, and this includes selective auditing by the department, it is unclear what entities CalRecycle would be auditing, what rubric CalRecycle would bring to inform the audit, or what the consequence would result if an audit found plans lacking. Without this enforcement mechanism, there is no way of ensuring that the provisions in the bill will be followed or that the policy goals of the measure will be achieved. As there is currently no requirement that the plans be implemented, the process for enforcing such a requirement is also not stipulated.
- Missing Guardrails. AB 2 addresses a real concern that without proper end-of-life management plans, solar panels will end up in landfills, and the high cost of managing these universal waste products will be absorbed by local governments, and ultimately by ratepayers. To make the solar industry overall more sustainable, this status quo needs to shift to prioritize the longevity of solar panels, followed by reuse and recycling before landfilling. To make these policy outcomes achievable, manufacturers and other producers along the product chain, not just consumers, should be financially invested in those outcomes. The question remains how the end-of-life management plans outlined in AB 2 achieve these objectives.
Numerous guardrails could be deployed to help ensure those objectives are met, including putting solar panels under warranty, requiring labeling for solar panels, setting explicit reuse and recycling goals, and requiring reporting and enforcement for all these measures.
Warranty. While individual contracts may provide warranties on solar panels, there is no federal or state warranty requirement. For lithium-ion car batteries, the federal government requires manufacturers offer an eight-year/100,000-mile warranty on all electric vehicles (EV) batteries. California sets an even higher standard, mandating a warranty of 10 years or 150,000 miles. Warranties ensure that manufacturers are invested in making durable products with long lifespans, which keeps those same products out of landfills longer.
Labeling. Different solar panels have slightly different compositions, depending on the manufacturer. Some solar panels contain materials that are hazardous at some concentrations, including, lead, cadmium, and arsenic. Labeling these solar panels with information that identifies the composition of the solar panel could help easily identify to consumers and waste managers whether or not a solar panel has hazardous material and needs to be treated differently from other solar panels. It could also assist recyclers in recovering material from a solar panel at the end of its life.
Repair/Reuse/Recycling Hierarchy. Typically, stewardship plans consider how to prioritize reuse and recycling, before landfilling, for a covered product. This could look like establishing, or having the industry establish, specific performance goals for rates of reuse and recycling of collected (or deployed) solar panels. For instance, in Washington State’s Solar Panel EPR program, at least 85% of PV modules, by weight, must be reused or recycled.
Enforcement. As described above, AB 2 currently does not have an explicit enforcement mechanism. Without an enforcement mechanism, there is no guarantee that the objectives, or any guardrails adopted to meet those objectives, will be met.
While these guardrails could apply to all solar panels, they may be especially important to the extent such end-of-life management cost are passed directly along to consumers. Because the cost of the program is put directly on Californians rather than being shared with industry, there is less economic incentive for producers to invest in solar panels with longer lifetimes or that they are more reusable or recyclable compared to other programs where there are explicit requirements on producers.
In moving forward with this legislation, the author and committee may wish to consider how to incorporate guardrails such as the ones described above to steer towards a circular economy for solar panels, prioritizing safe end-of-life, reuse, and recycling.
Related/Prior Legislation
AB 1215 (Newman Chapter 370, Statutes of 2022.) expands the Electronic Waste Recycling Act (EWRA) to include battery-embedded products.
AB 2440 (Creates the Responsible Battery Recycling Act (Act) of 2022 which requires producers of covered batteries, as defined, to establish a stewardship program for the collection and recycling of covered batteries.
SB 244 (Archuleta, 2021) would have required CalRecycle, in consultation with DTSC, to develop guidance for the proper handling and disposal of lithium-ion batteries and would have required the Department of Forestry and Fire Protection to develop protocols and training for the detection, safe-handling, and suppression of fires started from discarded lithium-ion batteries in the waste-handling system to be adopted by solid waste enterprises. SB 244 was vetoed by the Governor.
SOURCE:
Author
SUPPORT:
California Product Stewardship Council
California Solar & Storage Association
Californians Against Waste
OPPOSITION:
None received
-- END --
ASSEMBLY THIRD READING
ATR Bill Id:AB 2
Author:(Ward)
As Amended Ver:May 18, 2023
Majority vote
SUMMARY
Requires manufacturers of solar photovoltaic (PV) panels to develop and implement an end-of-life management plan (Plan) for the safe, convenient, and environmentally sound management and recycling of solar PV panels. Requires the Department of Resources, Recycling and Recovery (CalRecycle) to adopt regulations for the implementation of a Plan that includes the adoption of an administrative fee, paid by manufacturers of solar PV panels to CalRecycle to cover their administrative costs.
Major Provisions
COMMENTS
Life expectancy of a solar panel: According to the Solar Energy Industries Association, "[Solar panels] are designed to last more than 25 years, and many manufacturers back their products with performance guarantees backed by warranties. The lifespan of a [solar panel] is approximately 20-30 years, while the lifetime of an inverter is approximately 10 years. Therefore, many solar products have not yet reached end-of-life, and in fact, panels installed in the early 1980s are still performing at levels nearly equal to the installation performance level. Thus, even accounting for the dramatic growth of the industry, annual [solar panel] waste will not exceed 10,000 tons until after 2014, and will not exceed 100,000 tons until after 2017."
Right now, solar panel recycling suffers from a chicken-or-egg problem: there currently are not many places to recycle old solar panels, and there are not enough defunct solar panels to make recycling them economically attractive.
Solar energy is ever-growing: Under California law, SB 350 (De León, Chapter 547, Statutes of 2015), the renewable portfolio standard (RPS) requires 50% of all of California's energy to be generated from eligible renewable energy resources, including solar energy, by 2030. Solar power will be an integral part in reaching the RPS requirements for 2030.
Are solar panels hazardous? End-of-life disposal of solar products in the United States is governed by the federal Resource Recovery and Conservation Act (RCRA), and the state hazardous waste control law (HWCL). Under RCRA, solar panels may be classified as hazardous waste if the solar PV panel fails to pass the Toxicity Characteristics Leach Procedure (TCLP) test. Many solar PV panels pass the TCLP test, and thus are classified as non-hazardous and are not regulated as a hazardous waste under RCRA. However, the production of solar PV panels involves toxic heavy metals, such as cadmium, copper, lead, and selenium; therefore, some solar panels are likely to exhibit the characteristic of toxicity that have adverse environmental and public health effects and could become hazardous waste under the HWCL.
On October 1, 2015, SB 489 (Monning), Chapter 419, Statutes of 2015, was enacted to add Section 25259 to Health and Safety Code, which authorizes the department of Toxic Substances Control (DTSC) to adopt regulations to designate end-of-life PV modules that are identified as hazardous waste as a universal waste and subject those modules to universal waste management.
Universal waste: Universal wastes are hazardous wastes that are widely produced by households and many different types of businesses. Universal wastes include televisions, computers, other electronic devices, batteries, fluorescent lamps, mercury thermostats, and other mercury containing equipment, among others.
The hazardous waste regulations (California Code of Regulations (CCR), Title 22, Division 4.5, Chapter 11, Section 66261.9) establishes California's Universal Waste Rule, which identifies seven categories of hazardous wastes that can be managed as universal wastes. Any unwanted item that falls within one of these waste streams can be handled, transported, and recycled following the simple requirements set forth in the universal waste regulations (CCR, Title 22, Division 4.5, Chapter 23) versus the more stringent requirements for hazardous waste. The more relaxed requirements for managing universal wastes were adopted to ensure that they are managed safely and are not disposed of in the trash. The universal waste requirements are also less complex and easier to comply with, thereby increasing compliance.
Product stewardship (stewardship): Product stewardship, also known as Extended Producer Responsibility (EPR), is a strategy to place a shared responsibility for end-of-life product management on the producers, and all entities involved in the product chain, instead of the general public. Product stewardship encourages product design changes that minimize negative impacts on human health and the environment, at every stage of the product's lifecycle. This allows the costs of treatment and disposal to be incorporated into the total cost of a product. It places primary responsibility on the producer, or brand owner, who makes design and marketing decisions. It also creates a setting for markets to emerge that truly reflect the environmental impacts of a product, and to which producers and consumers respond.
Current state stewardship programs: There are several statewide EPR programs in California, all of which are overseen by the CalRecycle. They include: carpet materials management, paint product management, household batteries, mattress product management, and home-generated pharmaceutical waste and sharps waste.
This bill: It is important to note that this bill does not enact an EPR program for solar PV panels; however, AB 2 does enact one element of a solar PV panel EPR program by requiring manufacturers of solar panels to develop and implement an end-of-life management plan for solar PV panels. This bill is designed to work in tandem with AB 1238 (Ward) that is currently moving through the legislative process. AB 1238 requires DTSC to develop alternative management standards that are both protective of human health and the environment and that create flexibility for the solar PV panel recycling industry to recycle solar panels in California.
According to the Author
"In 2006, California launched the Million Solar Roofs Initiative to incentivize consumers and businesses to invest in solar. As of 2022, California has the largest solar market in the United States, supplying over 20% of its electricity. Unfortunately, given a 20-30 year life span, many of these panels are beginning to reach the end of their lifecycle. Assembly Bill (AB) 2 will establish the foundation for a convenient, safe, and environmentally sustainable system for the end-of-life management of solar photovoltaic (PV) panels. With the right conditions in place, end-of-life industries for PV panels can thrive as an important pillar of a sustainable solar industry in California."
Arguments in Support
According to Sierra Club California, "The International Renewable Energy Agency (IRENA) estimates that solar panel waste could total 78 million tons by 2050. Solar panel waste is expected to rise in the early 2030s as manufacturing innovation increases solar photovoltaic conversion efficiency and residential solar panel owners opt to replace their panels before the end of their 30-year lifetime.
Prioritizing the development of PV end-of-life management will help reduce the environmental impacts of solar energy, such as groundwater and soil contamination, and ultimately make solar energy more affordable.
As we continue to make the transition from fossil fuels to renewable energy alternatives, it is essential that the state lead by example in building upon existing PV module waste management regulations for the benefit of people and the planet."
Arguments in Opposition
None on file.
FISCAL COMMENTS
According to the Assembly Appropriations Committee, enactment of this bill could result in costs to CalRecycle of approximately $1.7 million in fiscal year (FY) 2024-25, $2.8 million in FY 2025-26, and $3.0 million in FY 2026-27 and ongoing for new staff positions to develop regulations and guidelines, review and evaluate notices, plans, and reports from manufacturers, and provide ongoing assistance. These costs would be fully covered by fees paid to CalRecycle by manufacturers of PV panels.
VOTES
ASM ENVIRONMENTAL SAFETY AND TOXIC MATERIALS: 8-0-1
YES: Lee, Hoover, Arambula, Bauer-Kahan, Connolly, McKinnor, Pacheco, Zbur
ABS, ABST OR NV: Ta
ASM NATURAL RESOURCES: 10-0-1
YES: Luz Rivas, Addis, Friedman, Hoover, Mathis, Muratsuchi, Pellerin, Ward, Wood, Zbur
ABS, ABST OR NV: Flora
ASM APPROPRIATIONS: 12-2-2
YES: Holden, Bryan, Calderon, Wendy Carrillo, Mike Fong, Hart, Lowenthal, Mathis, Papan, Pellerin, Weber, Ortega
NO: Megan Dahle, Dixon
ABS, ABST OR NV: Robert Rivas, Sanchez
UPDATED
VERSION: May 18, 2023
CONSULTANT: Josh Tooker / E.S. & T.M. / (916) 319-3965 FN: 0000732
Date of Hearing: May 10, 2023
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Chris Holden, Chair
ABPCA Bill Id:AB 2
Author:(Ward) – As Amended Ver:April 26, 2023
Policy Committee: | Environmental Safety and Toxic Materials | Vote: | 8 - 0 |
Natural Resources | 10 - 0 | ||
|
|
Urgency: No State Mandated Local Program: No Reimbursable: No
SUMMARY:
This bill requires a manufacturer of solar panels to develop and implement an end-of-life management plan (plan) for the recycling of solar panels.
Specifically, this bill, among other things:
- Requires the Department of Resources Recycling and Recovery (CalRecycle) to develop guidelines for the development of manufacturer plans for the safe, convenient, and environmentally sound management and recycling of the manufacturer’s solar panels and component materials and requires CalRecycle, by January 1, 2026, to adopt regulations to implement this bill.
- Requires a manufacturer or its agent to develop a plan for each model of solar panel it manufactures and sells or offers for sale in the state and submit it, by July 1, 2026, to CalRecycle for approval or disapproval. For solar panels first sold on or after July 1, 2026, requires the manufacturer submit a plan to CalRecycle no later than 30 days after the solar panels are first sold or offered for sale in the state.
- Requires a manufacturer or agent to implement the plan, as approved by CalRecycle.
- Requires a manufacturer or agent, beginning January 1, 2027, and annually thereafter, to provide CalRecycle with a written report for the prior calendar year documenting the implementation of the plan and assessing the achievement of the performance goals.
- Provides that a manufacturer that violates any requirement of this bill is liable for an administrative civil penalty of $500 for the first violation and $1,000 for a subsequent violation.
FISCAL EFFECT:
1) CalRecycle estimates costs of approximately $1.7 million in fiscal year (FY) 2024-25, $2.8 million in FY 2025-26, and $3.0 million in FY 2026-27 (General Fund or special fund) and ongoing for new staff positions to develop regulations and guidelines, review and evaluate notices, plans, and reports from manufacturers, and provide ongoing assistance.
2) Civil penalty revenue of an unknown but likely minor amount from violations of this bill.
COMMENTS:
1) Purpose. According to the author:
In 2006, California launched the Million Solar Roofs Initiative to incentivize consumers and businesses to invest in solar. As of 2022, California has the largest solar market in the United States, supplying over 20% of its electricity. Unfortunately, given a 20-30 year life span, many of these panels are beginning to reach the end of their lifecycle. Assembly Bill (AB) 2 will establish the foundation for a convenient, safe, and environmentally sustainable system for the end-of-life management of solar photovoltaic (PV) panels. With the right conditions in place, end-of-life industries for PV panels can thrive as an important pillar of a sustainable solar industry in California.
2) Background.
Recycling Solar Panels. California is the largest solar market in the United States. According to the Solar Energy Industries Association (SEIA), solar panels have a lifespan between 20 and 30 years. According to the United States Environmental Protection agency, “waste from end-of-life solar panels presents opportunities to recover valuable materials and create jobs through recycling.” By 2030, the International Renewable Energy Agency estimates that the cumulative value of recoverable materials from solar panels globally will be approximately $450 million. While solar panels are recyclable, their long lifespan means there are not enough panels in the market yet to support a robust recycling system. This results in too many solar panels being disposed in landfills. Experts estimate that only 1 in 10 solar panels is currently recycled in California. This lack of recycling capacity and increase in solar panel installation is going to result in a deluge of waste in coming years. SEIA established a national solar panel recycling program in 2016 and states it is working with its members to create a robust network of recycling and refurbishment providers that offer end-of-life management services for solar panels.
Extended Producer Responsibility (EPR). According to CalRecycle, EPR is a strategy that places shared responsibility for end-of-life product management on the producers, and all entities involved in the product chain, instead of on the general public and local governments, with oversight and enforcement provided by a governmental agency. This approach provides flexibility for manufacturers, based on their expertise in designing products and the systems that bring these products to market, to design systems to capture those products at the end-of-life to meet statutory goals. Currently there are four statewide EPR programs: paint, carpet, mattresses, and pharmaceutical and sharps waste. Additionally, last year, the Legislature adopted an expansive EPR program for single-use packaging and foodware that will be implemented over the next several years.
This bill establishes a framework for the management of solar panel waste in California. While not a true EPR program, this bill begins the process of requiring solar panel manufacturers to plan for the end-of-life management for the materials they generate. The author indicates he is working with stakeholders on a number of issues.
Of particular note to this committee, the EPR programs currently overseen by CalRecycle require covered entities, either individually or through a stewardship organization, to pay administrative fees that cover all costs incurred by CalRecycle in administering and enforcing the program. As noted, while this bill is not a true EPR program, the author may wish to consider including a cost recovery mechanism in this bill to cover CalRecycle’s administrative costs.
3) Related Legislation. AB 1238 (Ward) requires the Department of Toxic Substances Control, by January 1, 2026, to adopt alternative management standards for the management of solar panels. AB 1238 is pending in this committee.
Analysis Prepared by: Nikita Koraddi / APPR. / (916) 319-2081
Date of Hearing: April 24, 2023
ASSEMBLY COMMITTEE ON NATURAL RESOURCES
Luz Rivas, Chair
ABPCA Bill Id:AB 2 (
Author:Ward) – As Amended Ver:March 16, 2023
SUBJECT: Recycling: solar photovoltaic modules
SUMMARY: Requires a manufacturer of solar photovoltaic panels (solar panels) to develop and implement an end-of-life management plan (plan) for the safe, convenient, and environmentally sound management and recycling of the solar panels.
EXISTING LAW:
- Requires 60% of total retail sales of electricity in California to be generated from eligible renewable energy resources, including solar, by December 31, 2030, and creates the policy of planning to meet all of the state’s retail electricity supply with a mix of renewable and zero-carbon resources, as specified, by December 31, 2045. (Public Utilities Code 399.11 et seq.)
- Establishes the California Integrated Waste Management Act of 1989 (IWMA), administered by the Department of Resources Recycling and Recovery (CalRecycle), to generally regulate the disposal, management, and recycling of solid waste. Requires each city, county, and regional agency, if any, to divert 50% of all solid waste from landfill disposal or transformation by January 1, 2000, through source reduction, recycling, and composting activities. (Public Resources Code (PRC) 40000 et seq.)
- Declares that it is the policy goal of the state that, annually, not less than 75% of solid waste generated be source reduced, recycled, or composted. (PRC 41780.01)
- Establishes an expanded producer responsibility (EPR) program for pharmaceutical and sharps waste for the collection and proper disposal of home-generated drug and sharps waste. (PRC 42030 et seq.)
- Establishes an EPR program for packaging and foodware, including minimum recycling requirements, source reduction targets. (PRC 42040 et seq.)
- Establishes an EPR program for the proper collection and recycling of batteries. (PRC 42451 et seq.)
- Establishes an EPR program for the collection and recycling of carpet. (PRC 42970 et seq.)
- Establishes the Hazardous Waste Control Law, administered by the Department of Toxic Substances Control (DTSC), to govern the management of hazardous waste in California. (Health and Safety Code 25100 et seq.)
THIS BILL:
- Requires manufacturers of solar panels sold or offered for sale in the state to develop and plan for the safe, convenient, and environmentally sound management and recycling of the solar panels it manufactures and their component materials.
- Authorizes a manufacturer to designate an agent to act on behalf of the manufacturer to develop the plan provided that the agent provides CalRecycle with written notice of the arrangement within 60 days of the start of the agency. Requires the written notice to identify the brand names and model numbers of the solar panels for which the agent is developing the plan. Requires the agent to provide CalRecycle with 60 days’ written notice of the termination, expiration, or modification of its agency with a manufacturer.
- Requires the plan to include:
- A plan to minimize the release of hazardous substances into the environment;
- A plan to maximize the recovery of components, including rare earth metals and other commercially valuable materials;
- A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar panels, as specified.
- Performance goals, including, but not limited to, a goal for the rate of combined reuse and recycling of collected solar panels as a percentage of the total weight of solar panels collected, which shall be no less than 85%.
- Requires CalRecycle to develop guidelines for the development of the plans.
- Requires a manufacturer or its agent to develop a plan for each model of solar panel it manufactures and sells or offers for sale in the state and submit it to CalRecycle for approval. The plan shall be submitted by July 1, 2026. For solar panels first sold on or after that date, requires the plan to be submitted no later than 30 days after the solar panel is first sold or offered for sale in the state.
- Authorizes a manufacturer or its agent to amend the plan provided the amended plan is submitted to CalRecycle for approval.
- Requires a manufacturer or agent to implement the plan, as approved by CalRecycle.
- Requires a manufacturer or agent, beginning January 1, 2027, and annually thereafter, to submit a written report for the prior calendar year documenting the implementation of the plan and assessing the achievement of the performance goals.
- Requires CalRecycle to adopt regulations to implement the bill no later than January 1, 2026.
FISCAL EFFECT: Unknown
COMMENTS:
- Author’s statement:
In 2006, California launched the Million Solar Roofs Initiative to incentivize consumers and businesses to invest in solar. As of 2022, California has the largest solar market in the United States, supplying over 20% of its electricity. Unfortunately, given a 20-30 year life span, many of these panels are beginning to reach the end of their lifecycle. Assembly Bill (AB) 2 will establish the foundation for a convenient, safe, and environmentally sustainable system for the end-of-life management of solar photovoltaic (PV) panels. With the right conditions in place, end-of-life industries for PV panels can thrive as an important pillar of a sustainable solar industry in California.
- Solar panels. California is the largest solar market in the United States. According to the Solar Energy Industries Association (SEIA), California has installed nearly 40,000 megawatts of solar, which is enough to power over 10 million homes. Currently, the state generates approximately 27% of its power from solar. SEIA also states that solar panels have a lifespan between 20-30 years. It is not clear how much solar panel waste is currently generated in California.
The state’s Renewables Portfolio Standard requires that 60% of California’s energy be generated from eligible renewable energy, including solar, by 2030. Since 2020, California has required all new homes to have solar or be served by community solar projects, generating clean power for the state, but also ensuring that there will be a long-term need for end-of-life management for solar panels. - Recycling. According to the United States Environmental Protection agency, “waste from end-of-life solar panels presents opportunities to recover valuable materials and create jobs through recycling.” The most common solar panel (crystalline-silicone) is constructed of an aluminum frame, glass, copper wire, polymer layers and backsheet, silicon solar cells, and a plastic junction box. Most solar panels that have been tested are not classified as hazardous waste; however, their production involves the use of toxic heavy metals, like cadmium, copper, lead, and selenium. Nearly all of these materials are recyclable. By 2030, the International Renewable Energy Agency estimates that the cumulative value of recoverable materials from solar panels globally will be approximately $450 million.
While solar panels are recyclable, their long lifespan means that there are not enough of them in the market yet to support a robust recycling system. This results in too many being disposed in California’s landfills. Experts estimate that only 1 in 10 solar panels is currently recycled in California. This lack of recycling capacity and increase in solar panel installation is going to result in a deluge of waste in coming years.
SEIA established the National PV (solar panel) Recycling Program in 2016. SEIA states, “SEIA is working with its members to create a robust recycling network to ensure the clean energy economy remains sustainable for years to come.” The program includes a network of recycling and refurbishment providers that provide end-of-life management services for solar and storage installers, project and system owners, developers, distributors, and other parties. These organizations are capable of repairing, refurbishing, reselling, and/or recycling solar panels, inverters, and other solar equipment. The program’s website currently lists five recycling and repair and resale facilities.
- Extended Producer Responsibility (EPR) Programs. According to CalRecycle, EPR is a strategy that places shared responsibility for end-of-life product management on the producers, and all entities involved in the product chain, instead of on the general public and local governments, with oversight and enforcement provided by a governmental agency. This approach provides flexibility for manufacturers, based on their expertise in designing products and the systems that bring these products to market, to design systems to capture those products at the end-of-life to meet statutory goals. Currently there are four statewide EPR programs: paint, carpet, mattresses, and pharmaceutical and sharps waste. Additionally, last year the Legislature adopted an expansive EPR program for single-use packaging and food ware that will be implemented over the next several years.
- This bill. This bill establishes a framework for the management of solar panel waste in California. While not a true EPR program, this bill begins the process of requiring solar panel manufacturers to plan for the end-of-life management for the materials they generate. The author indicates that he is working with stakeholders on a number of issues.
- Suggested amendments.
This bill requires CalRecycle to approve the plan, but does not establish specific requirements for approval. The committee may wish to amend the bill to clarify CalRecycle’s authority to approve or disapprove a plan, based on the plan’s compliance with the bill and related CalRecycle regulations and guidelines.
This bill currently lacks enforcement provisions for violations. The committee may wish to amend the bill to establish administrative civil penalty authority in the amount of up to $1,000 for an initial violation and up to $5,000 for subsequent violations.
- Related legislation.
AB 1238 (Ward) requires DTSC to adopt, by January 1, 2026, alternative management standards for the management of solar panels. This bill has been referred to the Assembly Appropriations Committee.
- Double referred. This bill was approved by the Environmental Safety and Toxic Materials Committee on March 28th 8-0.
REGISTERED SUPPORT / OPPOSITION:
Support
None on file
Opposition
None on file
Analysis Prepared by: Elizabeth MacMillan / NAT. RES. /
Date of Hearing: March 28, 2023
ASSEMBLY COMMITTEE ON ENVIRONMENTAL SAFETY AND TOXIC MATERIALS
Alex Lee, Chair
ABPCA Bill Id:AB 2 (
Author:Ward) – As Amended Ver:March 16, 2023
SUBJECT: Recycling: solar photovoltaic modules
SUMMARY: Requires manufacturers of solar photovoltaic (PV) panels to develop and implement an end-of-life management plan (Plan) for the safe, convenient, and environmentally sound management and recycling of solar PV modules. Specifically, this bill:
1) Requires a manufacturer of solar PV panels sold or offered for sale in this state to develop a Plan for the safe, convenient, and environmentally sound management and recycling of the solar PV panels it manufactured and their component materials.
2) Authorizes a manufacturer of solar PV panels to designate an agent to act on its behalf to develop a Plan for solar panels.
3) Requires the Plan for solar PV panels to include, but is not limited to, the following:
a) A plan to minimize the release of hazardous substances into the environment;
b) A plan to maximize recovery of components, including rare earth metals and other commercially valuable materials;
c) A plan to disseminate to relevant stakeholders information necessary for the proper dismantling, transportation, and treatment of solar PV panels; and,
d) Performance goals, including but not limited to, a goal for the rate of combined reuse and recycling of collected solar PV panels.
4) Requires the Department of Resources, Recycling, and Recovery (CalRecycle) to develop guidelines for the development of the Plan.
5) Requires a manufacturer or its agent to submit to CalRecycle a Plan by July 1, 2026, for solar PV panels to be sold after July 1, 2026.
6) Requires a manufacturer of solar PV panels to implement a Plan that is approved by CalRecycle.
7) Requires a manufacturer or its agent, beginning on January 1, 2027, and by January 1, of each year thereafter, to provide CalRecycle with a written report for the prior calendar year documenting the implementation of its Plan and assessing the achievement of the performance goals contained in the Plan.
8) Requires, by January 1, 2026, CalRecycle to adopt regulations for the development and implementation of Plans.
EXISTING LAW:
1) Creates the Hazardous Waste Control Law (HWCL) and provides the Department of Toxic Substances Control (DTSC) with responsibility for overseeing the management of hazardous waste in California. (Health and Safety Code § 25100 et seq).
2) Defines hazardous wastes as those identified in regulation by DTSC; wastes categorized as hazardous under the federal Resource Conservation and Recovery Act (RCRA); and, extremely hazardous waste and acutely hazardous waste. (Health & Safety Code § 25117)
3) Regulates seven categories of hazardous wastes that can be managed as universal wastes. (California Code of Regulations, Title 22, Division 4.5, Ch. 22)
4) Requires the California Department of Resources Recycling and Recovery (CalRecycle) to coordinate with DTSC to develop and implement a public information program to provide uniform and consistent information on the proper disposal of hazardous substances found in and around homes, and to assist the efforts of counties required to provide household hazardous waste collection, recycling, and disposal programs. (Public Resources Code § 47050 - 47051)
5) Requires, by December 31, 2030, 50% of total retail sales of electricity in California to be generated from eligible renewable energy resources, including from solar energy. (Public Utilities Code (PUC) § 399.11-399.32)
6) Defines "solar energy system" as a solar energy device that has the primary purpose of providing for the collection and distribution of solar energy for the generation of electricity, that produces at least one kilowatt, and produces not more than five megawatts, alternating current rated peak electricity, and that meets or exceeds the eligibility criteria established by the Public Utilities Commission or the California Energy Commission. (PUC § 2852)
FISCAL EFFECT: Unknown.
COMMENTS:
Need for the bill: According to the author, "In 2006, California launched the Million Solar Roofs Initiative to incentivize consumers and businesses to invest in solar. As of 2022, California has the largest solar market in the United States, supplying over 20% of its electricity. Unfortunately, given a 20-30 year life span, many of these panels are beginning to reach the end of their lifecycle. Assembly Bill (AB) 2 will establish the foundation for a convenient, safe, and environmentally sustainable system for the end-of-life management of solar photovoltaic (PV) panels. With the right conditions in place, end-of-life industries for PV panels can thrive as an important pillar of a sustainable solar industry in California."
Life expectancy of a solar panel: According to the Solar Energy Industries Association, "[Solar panels] are designed to last more than 25 years, and many manufacturers back their products with performance guarantees backed by warranties. The lifespan of a [solar panel] is approximately 20-30 years, while the lifetime of an inverter is approximately 10 years. Therefore, many solar products have not yet reached end-of-life, and in fact, panels installed in the early 1980s are still performing at levels nearly equal to the installation performance level. Thus, even accounting for the dramatic growth of the industry, annual [solar panel] waste will not exceed 10,000 tons until after 2014, and will not exceed 100,000 tons until after 2017."
Right now, solar panel recycling suffers from a chicken-or-egg problem: there currently are not many places to recycle old solar panels, and there are not enough defunct solar panels to make recycling them economically attractive.
Solar energy is ever-growing: Under California law, SB 350 (De León, Chapter 547, Statutes of 2015), the renewable portfolio standard (RPS) requires 50% of all of California's energy to be generated from eligible renewable energy resources, including solar energy, by 2030. Solar power will be an integral part in reaching the RPS requirements for 2030.
Are solar panels hazardous? End-of-life disposal of solar products in the United States is governed by RCRA, and state policies that govern waste. To be governed by RCRA, solar panels must be classified as hazardous waste. To be classified as hazardous, panels must fail to pass the Toxicity Characteristics Leach Procedure (TCLP) test. Most solar panels pass the TCLP test, and thus are classified as non-hazardous and are not federally regulated. However, the production of solar panels involves toxic heavy metals, such as cadmium, copper, lead, and selenium; therefore, some solar panels are likely to exhibit the characteristic of toxicity that have adverse environmental and public health effects.
On October 1, 2015, SB 489 (Monning, Chapter 419, Statutes of 2015) was enacted to add Section 25259 to Health and Safety Code, which authorizes DTSC to adopt regulations to designate end-of-life photovoltaic modules that are identified as hazardous waste as a universal waste and subject those modules to universal waste management.
Universal waste: Universal wastes are hazardous wastes that are widely produced by households and many different types of businesses. Universal wastes include televisions, computers, other electronic devices, batteries, fluorescent lamps, mercury thermostats, and other mercury containing equipment, among others.
The hazardous waste regulations (CCR, Title 22, Division 4.5, Chapter 11 Section 66261.9) identify seven categories of hazardous wastes that can be managed as universal wastes. Any unwanted item that falls within one of these waste streams can be handled, transported, and recycled following the simple requirements set forth in the universal waste regulations (CCR, Title 22, Division 4.5, Chapter 23) versus the more stringent requirements for hazardous waste.
California’s Universal Waste Rule (CCR, Title 22, Division 4.5, Chapter 11 Section 66261.9) allows individuals and businesses to transport, handle, and recycle certain common hazardous wastes, termed universal wastes, in a manner that differs from the requirements for most hazardous wastes. The more relaxed requirements for managing universal wastes were adopted to ensure that they are managed safely and are not disposed of in the trash. The universal waste requirements are also less complex and easier to comply with, thereby increasing compliance.
Product stewardship (stewardship): Product stewardship, also known as Extended Producer Responsibility (EPR), is a strategy to place a shared responsibility for end-of-life product management on the producers, and all entities involved in the product chain, instead of the general public. Product stewardship encourages product design changes that minimize a negative impact on human health and the environment at every stage of the product's lifecycle. This allows the costs of treatment and disposal to be incorporated into the total cost of a product. It places primary responsibility on the producer, or brand owner, who makes design and marketing decisions. It also creates a setting for markets to emerge that truly reflect the environmental impacts of a product, and to which producers and consumers respond.
Current state stewardship programs: There are several statewide EPR programs in California, all of which are overseen by CalRecycle. They include: carpet materials management, paint product management, household batteries, mattress product management, and home-generated pharmaceutical waste and sharps waste.
This bill: It is important to note that this bill does not enact an EPR program for solar panels; however, AB 2, does enact one element of a solar panel EPR program by requiring manufacturers of solar panels to develop and implement an end-of-life management plan for solar panels. This bill is designed to work in tandem with AB 1238 (Ward) that is being heard in the Assembly Environmental Safety and Toxic Materials Committee the same day as this bill. AB 1238 requires DTSC to develop alternative management standards that are both protective of human health and the environment and that create flexibility for the solar panel recycling industry to recycle solar panels in California. While AB 2 does have a clear policy goal, it is still a work in progress. The author is working with stakeholders on a number of issues including how to best define "manufacturer" and what the elements of the end-of-life management plan should include.
Double-referral: Should this bill pass out of the Assembly Environmental Safety and Toxic Materials Committee, it will be re-referred to the Assembly Natural Resources Committee.
Arguments in support:
None on file.
Arguments in opposition:
None on file.
Related legislation:
1) AB 1238 (Ward). Requires DTSC to adopt, by January 1, 2026, alternative management standards for the management of solar panels. This bill is pending action before the Assembly Environmental Safety and Toxic Materials Committee.
2) AB 2440 (Irwin, Chapter 351, Statutes of 2022). Creates the Responsible Battery Recycling Act (Act) of 2022, which requires producers of covered batteries, as defined, to establish a stewardship program for the collection and recycling of covered batteries and covered battery-embedded products.
3) SB 289 (Newman, 2021). Would have enacted the Battery and Battery-Embedded Product Recycling and Fire Risk Reduction Act of 2021, which would have required the producers of batteries and battery-embedded products to establish a stewardship program for those products, with full implementation on or before June 30, 2025. This bill held on the suspense file in the Senate Appropriations Committee.
4) SB 212 (Jackson, Chapter 1004, Statutes of 2018). Requires entities that sell drugs or sharps in the state to individually, or with other entities, develop and implement a statewide home-generated drug stewardship plan, or a home-generated sharps waste stewardship plan, or both, for the collection and proper disposal of home-generated drug and sharps waste. Requires CalRecycle to oversee and enforce each stewardship plan.
REGISTERED SUPPORT / OPPOSITION:
Support
None on file.
Opposition
None on file.
Analysis Prepared by: Josh Tooker / E.S. & T.M. /
Discussed in Hearing
Senate Standing Committee on Environmental Quality
Assembly Floor
Assembly Standing Committee on Natural Resources
Bill Author
Bill Co-Author(s):