AB 1704: Greenhouse gases: embodied carbon building materials.
- Session Year: 2025-2026
- House: Assembly
- Latest Version Date: 2026-06-23
Current Status:
In Progress
(2026-08-13: In committee: Held under submission.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Existing law requires, by December 31, 2026, the State Air Resources Board, in consultation with relevant stakeholders, as provided, to develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses. Existing law requires, by December 31, 2028, the state board to develop a comprehensive strategy for the states building sector to achieve a 40% net reduction in greenhouse gas emissions of building materials, as specified, as soon as possible, but no later than December 31, 2035. Existing law authorizes the state board to establish an embodied carbon trading system, as defined, in compliance with these requirements, as provided.
This bill would require the state board to determine whether the cost of using building materials with lower embodied carbon have reached cost parity with would be cost effective during the first 2-year period of their use compared to using conventional building materials before implementing the above-described provisions. If the state board determines that using building materials with lower embodied carbon have not reached cost parity with would not be cost effective during the first 2-year period of their use compared to using conventional building materials, the bill would require the state board to delay or suspend, as applicable, implementation of those provisions for not less than 5 years, not to exceed 10 years in total.
Existing law requires, by December 31, 2026, the State Air Resources Board, in consultation with relevant stakeholders, as provided, to develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses. Existing law requires, by December 31, 2028, the state board to develop a comprehensive strategy for the states building sector to achieve a 40% net reduction in greenhouse gas emissions of building materials, as specified, as soon as possible, but no later than December 31, 2035. Existing law authorizes the state board to establish an embodied carbon trading system, as defined, in compliance with these requirements, as provided.
This bill would require the state board to determine whether the cost of building materials with lower embodied carbon have reached cost parity with conventional building materials before implementing the above-described provisions. If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the bill would require the state board to delay or suspend, as applicable, implementation of those provisions for not less than 5 years. The bill would authorize the state board to continue to make that determination and delay or suspend those provisions for not less than 5 years until the state board determines that building materials with lower embodied carbon have reached cost parity with conventional building materials, at which time the bill would require the state board to implement those provisions. The bill also would make conforming changes. years, not to exceed 10 years in total.
Existing law requires, by December 31, 2026, the State Air Resources Board, in consultation with relevant stakeholders, as provided, to develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses. Existing law requires, by December 31, 2028, the state board to develop a comprehensive strategy for the states building sector to achieve a 40% net reduction in greenhouse gas emissions of building materials, as specified, as soon as possible, but no later than December 31, 2035. Existing law authorizes the state board to establish an embodied carbon trading system, as defined, in compliance with these requirements, as provided.
This bill would require the state board to determine whether the cost of building materials with lower embodied carbon have reached cost parity with conventional building materials before implementing the above-described provisions. If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the bill would require the state board to delay or suspend, as applicable, implementation of those provisions for not less than 5 years. The bill would authorize the state board to continue to make that determination and delay or suspend those provisions for not less than 5 years until the state board determines that building materials with lower embodied carbon have reached cost parity with conventional building materials, at which time the bill would require the state board to implement those provisions. The bill also would make conforming changes.
Existing law establishes the California Conservation Corps in the Natural Resources Agency and requires the corps to implement and administer the conservation corps program. Existing law makes various findings and declarations relating to the corps.This bill would make a nonsubstantive change to those findings and declarations.Existing law establishes the California Conservation Corps in the Natural Resources Agency and requires the corps to implement and administer the conservation corps program. Existing law makes various findings and declarations relating to the corps.
This bill would make a nonsubstantive change to those findings and declarations.
(a)By December 31, 2026, the state board, in consultation with relevant stakeholders, including, but not limited to, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission, shall develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses.
(b)The state board shall also develop, by December 31, 2028, a comprehensive strategy for the states building sector to achieve a 40-percent net reduction in greenhouse gas emissions of building materials as soon as possible, but no later than December 31, 2035. The baseline for the 40-percent net reduction shall be established based on an industry average of environmental product declarations reported for the 2026 calendar year, or the most relevant, up-to-date data that is available, as determined by the state board.
(c)The framework developed pursuant to subdivision (a) shall include both of the following:
(1)A requirement for the submission by an entity undertaking the construction of a project with a minimum size of five new residential units or 10,000 square feet of nonresidential building space of a life-cycle life cycle assessment, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3), to determine the carbon intensity of the materials used in new residential and nonresidential buildings.
(2)A requirement for the submission by the manufacturer of a building material of an Environmental Product Declaration, Type III, as defined by the International Organization for Standardization (ISO) Standard 14025, or similarly robust material life-cycle life cycle assessment approaches that have uniform standards in data collection consistent with ISO Standard 14025, industry acceptance, and integrity for construction materials used for the building. The state board shall determine how to proceed in the event that insufficient material life-cycle life cycle assessments or Environmental Product Declarations exist, or in the event of significant supply chain issues.
(d)The framework developed pursuant to subdivision (a) may include a tracking and reporting mechanism in order to facilitate the reporting of data to the state board on the carbon intensity of buildings, and that would also allow tracking of progress toward the carbon intensity reduction targets set forth in this section. Except for a fee to reimburse the state board for any administrative costs incurred in administering the reporting mechanism, the state board shall not impose any other charges on the participants in the reporting mechanism authorized under this subdivision.
(e)Based on the information submitted by an entity undertaking the construction of a covered project pursuant to paragraph (2) of subdivision (i), as well as other relevant information as determined by the state board, the state board shall evaluate the cost impact and feasibility of implementation of the strategy developed pursuant to subdivision (b), for the purpose of developing recommendations for addressing known cost impact and feasibility issues in strategy implementation. This subdivision does not affect the projects status as deemed to comply with the applicable target based on the finding made solely by the entity undertaking the construction of a project pursuant to paragraphs (1) and (2) of subdivision (i).
(f)As used in this section the following terms have the following meanings:
(1)Feasibility, in regard to the use of a material, means all of the following:
(A)The material is capable of being installed in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(B)The material does not harm the health or safety of those who install the materials or occupy the building.
(C)The building using the material can be designed to provide an equivalent function and, at a minimum, the same useful life, performance, and durability as the building made with baseline materials.
(D)The material is commercially available to the region of the project.
(E)The material has not been involved in a claim for a construction or design defect, breach of express or implied warranty, fraud, or misrepresentation.
(F)The material provides an equivalent function and at least the same useful life, performance, and durability as the baseline material.
(2)(A)Cost impact means a significant overall material or operational cost increase or schedule delay resulting from incorporating the lower carbon material.
(B)As used in subparagraph (A), significant means an increase of 5 percent or more in the operational or overall material cost at the location of the project or time schedule delay that is attributable to incorporating a lower carbon material compared to the baseline material for which it is a substitute in the project. For purposes of this paragraph, the baseline material shall be the material that would have been used by the entity undertaking the construction of the project if this section did not apply to the project at the time the application for the building permit is submitted for a model home or project, as applicable.
(g)The state board shall allow the entity undertaking the construction of a project to use the same persons as those responsible for the Certificate of Installation pursuant to paragraph (3) of subdivision (a) of Section 10-103 of Title 24 of the California Code of Regulations in submitting, reporting, notifying, tracking, or otherwise conveying information to the state board.
(h)(1)The targets established by this section shall begin to apply no sooner than January 1, 2027, and two years after the baseline is established. The applicable target for each residential unit built within a project shall be the target that applied at the time the application was submitted for a building permit of the first model home in the project. For projects that do not use model homes, the applicable target shall be the target in effect at the time of submission of the application for the building permit.
(2)Notwithstanding paragraph (1), the state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(i)(1)For buildings covered by this section, the incorporation of lower carbon materials shall be limited or excluded to the extent that it has a cost impact or is unfeasible.
(2)An entity undertaking the construction of a project may seek to achieve the applicable target through the use of materials or methods pursuant to this section and, if an embodied carbon trading system is established or other alternative compliance method, pursuant to Section 38561.6, separately or in combination, as determined by the available compliance methods. If the entity undertaking the construction of a project uses materials or methods described in this section, Section 38561.6, or both, subject to the feasibility criteria and up to the cost impact limit, and the entity finds that it is still unable to achieve the applicable target due to unfeasibility or cost impact, then the project shall be deemed to comply with the applicable target. In that case, the entity undertaking the construction of a project shall provide the state board with documentation that shall be specified in the reporting and recordkeeping regulations that will be established by the state board.
(3)The state board shall consult experts, including, but not limited to, building product manufacturers, builders, and design professionals, to advise the state board on methods to reduce the carbon intensity of building materials and covered projects, while maintaining the avoidance of cost impact and their feasibility.
(4)The state board shall not have the authority to approve, deny, or delay the planning, use, development, design, or construction of a project.
(5)Manufacturers of building materials shall be required to report data to the state board to ensure that their products comply with applicable reduction targets in accordance with reporting and compliance requirements that will be established by the state board.
(j)This section does not apply to appliances.
(k)For purposes of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), no adverse environmental impact associated with the manufacture of building materials may be attributed, directly or indirectly, to the project incorporating the building material. This subdivision does not relieve the entity undertaking the construction of a covered project from complying with any other provision within this section.
(l)In developing the strategy pursuant to subdivision (b), the state board shall do all of the following:
(1)Research and prioritize actions and provisions that leverage state and federal incentives, where applicable, to reduce costs of implementing greenhouse gas emissions reduction technologies, processes, and materials used in construction-related projects for the construction industry, homeowners, and developers, and to increase economic value for the state.
(2)Evaluate measures to support market demand and financial incentives to encourage the production and use of materials used in construction-related projects with low greenhouse gas intensity, including, but not limited to, consideration of the following measures:
(A)Measures to expedite the adoption for use in projects undertaken by state agencies, including the Department of Transportation and the Department of General Services.
(B)Measures to provide financial support and incentives for research, development, and demonstration of technologies to mitigate emissions of greenhouse gases from the manufacture of materials used in construction-related projects, with the objective of accelerating commercial availability of those technologies.
(C)Measures to provide consumer access to building material embodied carbon data reported to the state board.
(m)The Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code) does not apply to reporting regulations and reporting standards promulgated pursuant to this section. Prior to adopting those reporting standards and regulations pursuant to this section, the proposed rulemaking shall be made available to the public and stakeholders for comment and workshopping. The state board, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission shall exchange technical information with each other as part of this process prior to the adoption of any reporting standard or regulation pursuant to this section. All other regulations adopted pursuant to this section are subject to the Administrative Procedure Act.
(n)Division 13 (commencing with Section 21000) of the Public Resources Code does not apply to the state boards development and approval of the framework and comprehensive strategy developed pursuant to this section.
(o)Paragraphs (1) and (2) of subdivision (i) apply when the state board adopts any mechanism, standard, requirement, regulation, rule, protocol, framework, strategy, credit, target, or establishes an embodied carbon trading system, or alternative incentives or compliance programs, whichever occurs first.
(p)Penalties relating to the use or failure to use low-carbon building materials, or the failure to achieve the applicable target, may not be applied to an entity undertaking the construction of a project that is deemed to comply pursuant to paragraphs (1) and (2) of subdivision (i).
(q)Except as otherwise provided in subdivision (p), penalties for a violation of this section are limited to the penalties described in subdivisions (a) and (d) of Section 42402, unless the violation shows a disregard for the regulations under this section, extreme negligence, or acts of deceit, in which case the penalties set forth in subdivision (b) of Section 42402 apply.
(r)Notwithstanding any other law, the penalties described in subdivision (q) are the exclusive enforcement mechanism against regulated entities for a violation of this section and Section 38561.6.
(s)As used in this section, entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
SEC. 2.Section 38561.4 is added to the Health and Safety Code, to read:38561.4.(a)The state board shall determine that building materials with lower embodied carbon have reached cost parity with would be cost effective during the first two-year period of their use compared to using conventional building materials before implementing paragraph (1) of subdivision (h) of Section 38561.3 and subparagraph (A) of paragraph (4) of subdivision (c) of, or paragraph (1) of subdivision (d) of, Section 38561.6.
(b)If the state board determines that using building materials with lower embodied carbon have not reached cost parity with would not be cost effective during the first two-year period of their use compared to using conventional building materials, the state board shall delay or suspend, as applicable, implementation of Sections 38561.3 and 38561.6 for not less than five years. At the end of the period of delay or suspension, the state board may determine whether using building materials with lower embodied carbon have reached cost parity with would be cost effective during the first two-year period of their use compared to using conventional building materials. If the state board determines that using building materials with lower embodied carbon have not reached cost parity with would not be cost effective within the first two-year period of their use compared to using conventional building materials, the state board shall again delay or suspend the implementation of those sections for not less than 5 years, not to exceed 10 years in total.
SEC. 3.Section 38561.6 of the Health and Safety Code is amended to read:38561.6.(a)For purposes of this section, the following definitions apply:
(1)Carbon intensity means the quantity of life-cycle life cycle greenhouse gas emissions per unit of building material, and specifically the ratio between the net upstream carbon dioxide impact (emissions minus storage) of a material and the weight of the material.
(2)Embodied carbon trading system means a market-based credit trading platform of greenhouse gas emissions exchanges, banking, credits, and other transactions, governed by rules and protocols established by the state board, that result in the same greenhouse gas emission reduction, over the same time period, as direct compliance with a greenhouse gas emission limit or emission reduction measure adopted by the state board pursuant to this division.
(3)Low-carbon building standard means a framework created pursuant to Section 38561.3 to reduce by 40 percent the carbon intensity of the materials used in newly constructed buildings identified in paragraph (1) of subdivision (c) of Section 38561.3 and within the embodied carbon trading system, to facilitate a credit trading platform for building materials along with other requirements as specified.
(4)Material life-cycle life cycle means the aggregate of greenhouse gas emissions associated with material production, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3).
(5)Entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
(b)The state board may establish an embodied carbon trading system in compliance with the requirements set forth in Section 38561.3 and this section that meets both of the following requirements:
(1)If the state board opts to establish an embodied carbon trading system, the system shall be designed to be used by entities undertaking a construction project and building material manufacturers.
(2)The embodied carbon trading system unit of measurement shall be Global Warming Potential (GWP) per gross square foot (kg CO2e/sq. ft.2).
(c)The state board shall have the flexibility to design the embodied carbon trading system and may do all of the following with respect to the embodied carbon trading system:
(1)(A)Adopt rules and regulations for the credit allocation approach, the anticipated carbon price in the scheme, and trading periods.
(B)In developing the rules and regulations for the credit allocation approach, including those governing any tradeable compliance instrument, make efforts to avoid an overabundance of compliance credits in the market, and, to this end, may consider setting an upper limit on amount of credits that can be generated per unit of material.
(2)Consider using the credits generated through the use of the embodied carbon trading system to help promote innovation and investment in building construction materials that reduce emissions of greenhouse gases.
(3)Consider all relevant information pertaining to low-carbon building materials reduction programs in other states, localities, and nations, including other states, Canada, and the European Union, and, in doing so, review existing and proposed international, federal, and state greenhouse gas emission reporting programs, make reasonable efforts to promote consistency among the programs established pursuant to this division and other programs, and streamline reporting requirements on greenhouse gas emission sources.
(4)(A)Except as provided in subparagraph (B), integrate the embodied carbon trading system with the framework described in Section 38561.3 on or before December 31, 2026, and shall implement that system on and after January 1, 2029.
(B)The state board shall delay or suspend the implementation of this paragraph and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(5)Consult with the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission in the development of building regulations, in order to minimize duplicate or inconsistent regulatory requirements.
(d)(1)Except as provided in paragraph (2), the state board shall have the discretion to adopt further greenhouse gas emission reduction targets within the scope of Section 38561.3 prior to December 31, 2035, or provide early reduction credit considering market adoption, if appropriate.
(2)The state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(e)In developing its plan, the state board shall identify opportunities for emission reduction measures from all verifiable and enforceable actions, and best management practices.
(f)(1)The state board may adopt rules and regulations to monitor, verify, and enforce reductions in embodied carbon in building materials pursuant to this section and Section 38561.3, consistent with the requirements of Section 38561.4.
(2)The state board shall minimize the administrative burden of implementing and complying with these regulations when possible.
(3)The state board shall design any rules and regulations to encourage manufacturers of building materials to produce low-carbon materials for sale in California to ensure that entities that undertake construction of projects identified in paragraph (1) of subdivision (c) of Section 38561.3 have an adequate supply of low-carbon materials that meet all of the feasibility and cost impact requirements of subdivision (f) of Section 38561.3 to meet the greenhouse gas reduction targets established in Section 38561.3.
(g)The state board may consider the use of third parties, such as verifiers, for purposes of implementing the requirements of this section.
(h)Compliance mechanisms, reporting requirements, and penalties for noncompliance with any compliance standards or an embodied carbon trading system established pursuant to this section or Section 38561.3 will be determined by the administrative process. The carbon trading system established pursuant to this section alone or in combination with Section 38561.3 shall not cause a project to have a cost impact or not comply with the term feasibility as those terms are defined in subdivision (f) of Section 38561.3.
(i)The state board shall periodically review and update its emission reporting and compliance standard requirements, as necessary.
(j)This section does not limit the state boards ability to establish alternative incentives or compliance programs aside from or in addition to an embodied carbon trading system.
(k)This section provides guidance only. This section does not limit or expand the authority of the state board.
(l)This section does not authorize the creation of a revenue-generating program or any other program that would result in moneys being paid to the state, other than penalties imposed for a violation of this section.
(m)Notwithstanding any other law, the penalties described in subdivision (q) of Section 38561.3 are the exclusive enforcement mechanism against regulated entities for a violation of this section.
(a)By December 31, 2026, the state board, in consultation with relevant stakeholders, including, but not limited to, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission, shall develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses.
(b)The state board shall also develop, by December 31, 2028, a comprehensive strategy for the states building sector to achieve a 40-percent net reduction in greenhouse gas emissions of building materials as soon as possible, but no later than December 31, 2035. The baseline for the 40-percent net reduction shall be established based on an industry average of environmental product declarations reported for the 2026 calendar year, or the most relevant, up-to-date data that is available, as determined by the state board.
(c)The framework developed pursuant to subdivision (a) shall include both of the following:
(1)A requirement for the submission by an entity undertaking the construction of a project with a minimum size of five new residential units or 10,000 square feet of nonresidential building space of a life-cycle assessment, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3), to determine the carbon intensity of the materials used in new residential and nonresidential buildings.
(2)A requirement for the submission by the manufacturer of a building material of an Environmental Product Declaration, Type III, as defined by the International Organization for Standardization (ISO) Standard 14025, or similarly robust material life-cycle assessment approaches that have uniform standards in data collection consistent with ISO Standard 14025, industry acceptance, and integrity for construction materials used for the building. The state board shall determine how to proceed in the event that insufficient material life-cycle assessments or Environmental Product Declarations exist, or in the event of significant supply chain issues.
(d)The framework developed pursuant to subdivision (a) may include a tracking and reporting mechanism in order to facilitate the reporting of data to the state board on the carbon intensity of buildings, and that would also allow tracking of progress toward the carbon intensity reduction targets set forth in this section. Except for a fee to reimburse the state board for any administrative costs incurred in administering the reporting mechanism, the state board shall not impose any other charges on the participants in the reporting mechanism authorized under this subdivision.
(e)Based on the information submitted by an entity undertaking the construction of a covered project pursuant to paragraph (2) of subdivision (i), as well as other relevant information as determined by the state board, the state board shall evaluate the cost impact and feasibility of implementation of the strategy developed pursuant to subdivision (b), for the purpose of developing recommendations for addressing known cost impact and feasibility issues in strategy implementation. This subdivision does not affect the projects status as deemed to comply with the applicable target based on the finding made solely by the entity undertaking the construction of a project pursuant to paragraphs (1) and (2) of subdivision (i).
(f)As used in this section the following terms have the following meanings:
(1)Feasibility, in regard to the use of a material, means all of the following:
(A)The material is capable of being installed in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(B)The material does not harm the health or safety of those who install the materials or occupy the building.
(C)The building using the material can be designed to provide an equivalent function and, at a minimum, the same useful life, performance, and durability as the building made with baseline materials.
(D)The material is commercially available to the region of the project.
(E)The material has not been involved in a claim for a construction or design defect, breach of express or implied warranty, fraud, or misrepresentation.
(F)The material provides an equivalent function and at least the same useful life, performance, and durability as the baseline material.
(2)(A)Cost impact means a significant overall material or operational cost increase or schedule delay resulting from incorporating the lower carbon material.
(B)As used in subparagraph (A), significant means an increase of 5 percent or more in the operational or overall material cost at the location of the project or time schedule delay that is attributable to incorporating a lower carbon material compared to the baseline material for which it is a substitute in the project. For purposes of this paragraph, the baseline material shall be the material that would have been used by the entity undertaking the construction of the project if this section did not apply to the project at the time the application for the building permit is submitted for a model home or project, as applicable.
(g)The state board shall allow the entity undertaking the construction of a project to use the same persons as those responsible for the Certificate of Installation pursuant to paragraph (3) of subdivision (a) of Section 10-103 of Title 24 of the California Code of Regulations in submitting, reporting, notifying, tracking, or otherwise conveying information to the state board.
(h)(1)The targets established by this section shall begin to apply no sooner than January 1, 2027, and two years after the baseline is established. The applicable target for each residential unit built within a project shall be the target that applied at the time the application was submitted for a building permit of the first model home in the project. For projects that do not use model homes, the applicable target shall be the target in effect at the time of submission of the application for the building permit.
(2)Notwithstanding paragraph (1), the state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(i)(1)For buildings covered by this section, the incorporation of lower carbon materials shall be limited or excluded to the extent that it has a cost impact or is unfeasible.
(2)An entity undertaking the construction of a project may seek to achieve the applicable target through the use of materials or methods pursuant to this section and, if an embodied carbon trading system is established or other alternative compliance method, pursuant to Section 38561.6, separately or in combination, as determined by the available compliance methods. If the entity undertaking the construction of a project uses materials or methods described in this section, Section 38561.6, or both, subject to the feasibility criteria and up to the cost impact limit, and the entity finds that it is still unable to achieve the applicable target due to unfeasibility or cost impact, then the project shall be deemed to comply with the applicable target. In that case, the entity undertaking the construction of a project shall provide the state board with documentation that shall be specified in the reporting and recordkeeping regulations that will be established by the state board.
(3)The state board shall consult experts, including, but not limited to, building product manufacturers, builders, and design professionals, to advise the state board on methods to reduce the carbon intensity of building materials and covered projects, while maintaining the avoidance of cost impact and their feasibility.
(4)The state board shall not have the authority to approve, deny, or delay the planning, use, development, design, or construction of a project.
(5)Manufacturers of building materials shall be required to report data to the state board to ensure that their products comply with applicable reduction targets in accordance with reporting and compliance requirements that will be established by the state board.
(j)This section does not apply to appliances.
(k)For purposes of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), no adverse environmental impact associated with the manufacture of building materials may be attributed, directly or indirectly, to the project incorporating the building material. This subdivision does not relieve the entity undertaking the construction of a covered project from complying with any other provision within this section.
(l)In developing the strategy pursuant to subdivision (b), the state board shall do all of the following:
(1)Research and prioritize actions and provisions that leverage state and federal incentives, where applicable, to reduce costs of implementing greenhouse gas emissions reduction technologies, processes, and materials used in construction-related projects for the construction industry, homeowners, and developers, and to increase economic value for the state.
(2)Evaluate measures to support market demand and financial incentives to encourage the production and use of materials used in construction-related projects with low greenhouse gas intensity, including, but not limited to, consideration of the following measures:
(A)Measures to expedite the adoption for use in projects undertaken by state agencies, including the Department of Transportation and the Department of General Services.
(B)Measures to provide financial support and incentives for research, development, and demonstration of technologies to mitigate emissions of greenhouse gases from the manufacture of materials used in construction-related projects, with the objective of accelerating commercial availability of those technologies.
(C)Measures to provide consumer access to building material embodied carbon data reported to the state board.
(m)The Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code) does not apply to reporting regulations and reporting standards promulgated pursuant to this section. Prior to adopting those reporting standards and regulations pursuant to this section, the proposed rulemaking shall be made available to the public and stakeholders for comment and workshopping. The state board, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission shall exchange technical information with each other as part of this process prior to the adoption of any reporting standard or regulation pursuant to this section. All other regulations adopted pursuant to this section are subject to the Administrative Procedure Act.
(n)Division 13 (commencing with Section 21000) of the Public Resources Code does not apply to the state boards development and approval of the framework and comprehensive strategy developed pursuant to this section.
(o)Paragraphs (1) and (2) of subdivision (i) apply when the state board adopts any mechanism, standard, requirement, regulation, rule, protocol, framework, strategy, credit, target, or establishes an embodied carbon trading system, or alternative incentives or compliance programs, whichever occurs first.
(p)Penalties relating to the use or failure to use low-carbon building materials, or the failure to achieve the applicable target, may not be applied to an entity undertaking the construction of a project that is deemed to comply pursuant to paragraphs (1) and (2) of subdivision (i).
(q)Except as otherwise provided in subdivision (p), penalties for a violation of this section are limited to the penalties described in subdivisions (a) and (d) of Section 42402, unless the violation shows a disregard for the regulations under this section, extreme negligence, or acts of deceit, in which case the penalties set forth in subdivision (b) of Section 42402 apply.
(r)Notwithstanding any other law, the penalties described in subdivision (q) are the exclusive enforcement mechanism against regulated entities for a violation of this section and Section 38561.6.
(s)As used in this section, entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
SEC. 2.Section 38561.4 is added to the Health and Safety Code, to read:38561.4.(a)The state board shall determine that building materials with lower embodied carbon have reached cost parity with conventional building materials before implementing paragraph (1) of subdivision (h) of Section 38561.3 and subparagraph (A) of paragraph (4) of subdivision (c) of, or paragraph (1) of subdivision (d) of, Section 38561.6.
(b)If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the state board shall delay or suspend, as applicable, implementation of Sections 38561.3 and 38561.6 for not less than five years. At the end of the period of delay or suspension, the state board may determine whether building materials with lower embodied carbon have reached cost parity with conventional building materials. If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the state board shall again delay or suspend the implementation of those sections for not less than five years. The state board may continue to make that determination and delay or suspend those provisions in accordance with this subdivision until subdivision (a) applies and, at that time, the state board shall implement Sections 38561.3 and 38561.6. 5 years, not to exceed 10 years in total.
SEC. 3.Section 38561.6 of the Health and Safety Code is amended to read:38561.6.(a)For purposes of this section, the following definitions apply:
(1)Carbon intensity means the quantity of life-cycle greenhouse gas emissions per unit of building material, and specifically the ratio between the net upstream carbon dioxide impact (emissions minus storage) of a material and the weight of the material.
(2)Embodied carbon trading system means a market-based credit trading platform of greenhouse gas emissions exchanges, banking, credits, and other transactions, governed by rules and protocols established by the state board, that result in the same greenhouse gas emission reduction, over the same time period, as direct compliance with a greenhouse gas emission limit or emission reduction measure adopted by the state board pursuant to this division.
(3)Low-carbon building standard means a framework created pursuant to Section 38561.3 to reduce by 40 percent the carbon intensity of the materials used in newly constructed buildings identified in paragraph (1) of subdivision (c) of Section 38561.3 and within the embodied carbon trading system, to facilitate a credit trading platform for building materials along with other requirements as specified.
(4)Material life-cycle means the aggregate of greenhouse gas emissions associated with material production, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3).
(5)Entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
(b)The state board may establish an embodied carbon trading system in compliance with the requirements set forth in Section 38561.3 and this section that meets both of the following requirements:
(1)If the state board opts to establish an embodied carbon trading system, the system shall be designed to be used by entities undertaking a construction project and building material manufacturers.
(2)The embodied carbon trading system unit of measurement shall be Global Warming Potential (GWP) per gross square foot (kg CO2e/sq. ft.2).
(c)The state board shall have the flexibility to design the embodied carbon trading system and may do all of the following with respect to the embodied carbon trading system:
(1)(A)Adopt rules and regulations for the credit allocation approach, the anticipated carbon price in the scheme, and trading periods.
(B)In developing the rules and regulations for the credit allocation approach, including those governing any tradeable compliance instrument, make efforts to avoid an overabundance of compliance credits in the market, and, to this end, may consider setting an upper limit on amount of credits that can be generated per unit of material.
(2)Consider using the credits generated through the use of the embodied carbon trading system to help promote innovation and investment in building construction materials that reduce emissions of greenhouse gases.
(3)Consider all relevant information pertaining to low-carbon building materials reduction programs in other states, localities, and nations, including other states, Canada, and the European Union, and, in doing so, review existing and proposed international, federal, and state greenhouse gas emission reporting programs, make reasonable efforts to promote consistency among the programs established pursuant to this division and other programs, and streamline reporting requirements on greenhouse gas emission sources.
(4)(A)Except as provided in subparagraph (B), integrate the embodied carbon trading system with the framework described in Section 38561.3 on or before December 31, 2026, and shall implement that system on and after January 1, 2029.
(B)The state board shall delay or suspend the implementation of this paragraph and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(5)Consult with the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission in the development of building regulations, in order to minimize duplicate or inconsistent regulatory requirements.
(d)(1)Except as provided in paragraph (2), the state board shall have the discretion to adopt further greenhouse gas emission reduction targets within the scope of Section 38561.3 prior to December 31, 2035, or provide early reduction credit considering market adoption, if appropriate.
(2)The state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(e)In developing its plan, the state board shall identify opportunities for emission reduction measures from all verifiable and enforceable actions, and best management practices.
(f)(1)The state board may adopt rules and regulations to monitor, verify, and enforce reductions in embodied carbon in building materials pursuant to this section and Section 38561.3, consistent with the requirements of Section 38561.4.
(2)The state board shall minimize the administrative burden of implementing and complying with these regulations when possible.
(3)The state board shall design any rules and regulations to encourage manufacturers of building materials to produce low-carbon materials for sale in California to ensure that entities that undertake construction of projects identified in paragraph (1) of subdivision (c) of Section 38561.3 have an adequate supply of low-carbon materials that meet all of the feasibility and cost impact requirements of subdivision (f) of Section 38561.3 to meet the greenhouse gas reduction targets established in Section 38561.3.
(g)The state board may consider the use of third parties, such as verifiers, for purposes of implementing the requirements of this section.
(h)Compliance mechanisms, reporting requirements, and penalties for noncompliance with any compliance standards or an embodied carbon trading system established pursuant to this section or Section 38561.3 will be determined by the administrative process. The carbon trading system established pursuant to this section alone or in combination with Section 38561.3 shall not cause a project to have a cost impact or not comply with the term feasibility as those terms are defined in subdivision (f) of Section 38561.3.
(i)The state board shall periodically review and update its emission reporting and compliance standard requirements, as necessary.
(j)This section does not limit the state boards ability to establish alternative incentives or compliance programs aside from or in addition to an embodied carbon trading system.
(k)This section provides guidance only. This section does not limit or expand the authority of the state board.
(l)This section does not authorize the creation of a revenue-generating program or any other program that would result in moneys being paid to the state, other than penalties imposed for a violation of this section.
(m)Notwithstanding any other law, the penalties described in subdivision (q) of Section 38561.3 are the exclusive enforcement mechanism against regulated entities for a violation of this section.
(a)By December 31, 2026, the state board, in consultation with relevant stakeholders, including, but not limited to, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission, shall develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings, including those for residential uses.
(b)The state board shall also develop, by December 31, 2028, a comprehensive strategy for the states building sector to achieve a 40-percent net reduction in greenhouse gas emissions of building materials as soon as possible, but no later than December 31, 2035. The baseline for the 40-percent net reduction shall be established based on an industry average of environmental product declarations reported for the 2026 calendar year, or the most relevant, up-to-date data that is available, as determined by the state board.
(c)The framework developed pursuant to subdivision (a) shall include both of the following:
(1)A requirement for the submission by an entity undertaking the construction of a project with a minimum size of five new residential units or 10,000 square feet of nonresidential building space of a life-cycle assessment, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3), to determine the carbon intensity of the materials used in new residential and nonresidential buildings.
(2)A requirement for the submission by the manufacturer of a building material of an Environmental Product Declaration, Type III, as defined by the International Organization for Standardization (ISO) Standard 14025, or similarly robust material life-cycle assessment approaches that have uniform standards in data collection consistent with ISO Standard 14025, industry acceptance, and integrity for construction materials used for the building. The state board shall determine how to proceed in the event that insufficient material life-cycle assessments or Environmental Product Declarations exist, or in the event of significant supply chain issues.
(d)The framework developed pursuant to subdivision (a) may include a tracking and reporting mechanism in order to facilitate the reporting of data to the state board on the carbon intensity of buildings, and that would also allow tracking of progress toward the carbon intensity reduction targets set forth in this section. Except for a fee to reimburse the state board for any administrative costs incurred in administering the reporting mechanism, the state board shall not impose any other charges on the participants in the reporting mechanism authorized under this subdivision.
(e)Based on the information submitted by an entity undertaking the construction of a covered project pursuant to paragraph (2) of subdivision (i), as well as other relevant information as determined by the state board, the state board shall evaluate the cost impact and feasibility of implementation of the strategy developed pursuant to subdivision (b), for the purpose of developing recommendations for addressing known cost impact and feasibility issues in strategy implementation. This subdivision does not affect the projects status as deemed to comply with the applicable target based on the finding made solely by the entity undertaking the construction of a project pursuant to paragraphs (1) and (2) of subdivision (i).
(f)As used in this section the following terms have the following meanings:
(1)Feasibility, in regard to the use of a material, means all of the following:
(A)The material is capable of being installed in a successful manner within a reasonable period of time, taking into account economic, environmental, legal, social, and technological factors.
(B)The material does not harm the health or safety of those who install the materials or occupy the building.
(C)The building using the material can be designed to provide an equivalent function and, at a minimum, the same useful life, performance, and durability as the building made with baseline materials.
(D)The material is commercially available to the region of the project.
(E)The material has not been involved in a claim for a construction or design defect, breach of express or implied warranty, fraud, or misrepresentation.
(F)The material provides an equivalent function and at least the same useful life, performance, and durability as the baseline material.
(2)(A)Cost impact means a significant overall material or operational cost increase or schedule delay resulting from incorporating the lower carbon material.
(B)As used in subparagraph (A), significant means an increase of 5 percent or more in the operational or overall material cost at the location of the project or time schedule delay that is attributable to incorporating a lower carbon material compared to the baseline material for which it is a substitute in the project. For purposes of this paragraph, the baseline material shall be the material that would have been used by the entity undertaking the construction of the project if this section did not apply to the project at the time the application for the building permit is submitted for a model home or project, as applicable.
(g)The state board shall allow the entity undertaking the construction of a project to use the same persons as those responsible for the Certificate of Installation pursuant to paragraph (3) of subdivision (a) of Section 10-103 of Title 25 24 of the California Code of Regulations in submitting, reporting, notifying, tracking, or otherwise conveying information to the state board.
(h)(1)The targets established by this section shall begin to apply no sooner than January 1, 2027, and two years after the baseline is established. The applicable target for each residential unit built within a project shall be the target that applied at the time the application was submitted for a building permit of the first model home in the project. For projects that do not use model homes, the applicable target shall be the target in effect at the time of submission of the application for the building permit.
(2)Notwithstanding paragraph (1), the state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(i)(1)For buildings covered by this section, the incorporation of lower carbon materials shall be limited or excluded to the extent that it has a cost impact or is unfeasible.
(2)An entity undertaking the construction of a project may seek to achieve the applicable target through the use of materials or methods pursuant to this section and, if an embodied carbon trading system is established or other alternative compliance method, pursuant to Section 38561.6, separately or in combination, as determined by the available compliance methods. If the entity undertaking the construction of a project uses materials or methods described in this section, Section 38561.6, or both, subject to the feasibility criteria and up to the cost impact limit, and the entity finds that it is still unable to achieve the applicable target due to unfeasibility or cost impact, then the project shall be deemed to comply with the applicable target. In that case, the entity undertaking the construction of a project shall provide the state board with documentation that shall be specified in the reporting and recordkeeping regulations that will be established by the state board.
(3)The state board shall consult experts, including, but not limited to, building product manufacturers, builders, and design professionals, to advise the state board on methods to reduce the carbon intensity of building materials and covered projects, while maintaining the avoidance of cost impact and their feasibility.
(4)The state board shall not have the authority to approve, deny, or delay the planning, use, development, design, or construction of a project.
(5)Manufacturers of building materials shall be required to report data to the state board to ensure that their products comply with applicable reduction targets in accordance with reporting and compliance requirements that will be established by the state board.
(j)This section does not apply to appliances.
(k)For purposes of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), no adverse environmental impact associated with the manufacture of building materials may be attributed, directly or indirectly, to the project incorporating the building material. This subdivision does not relieve the entity undertaking the construction of a covered project from complying with any other provision within this section.
(l)In developing the strategy pursuant to subdivision (b), the state board shall do all of the following:
(1)Research and prioritize actions and provisions that leverage state and federal incentives, where applicable, to reduce costs of implementing greenhouse gas emissions reduction technologies, processes, and materials used in construction-related projects for the construction industry, homeowners, and developers, and to increase economic value for the state.
(2)Evaluate measures to support market demand and financial incentives to encourage the production and use of materials used in construction-related projects with low greenhouse gas intensity, including, but not limited to, consideration of the following measures:
(A)Measures to expedite the adoption for use in projects undertaken by state agencies, including the Department of Transportation and the Department of General Services.
(B)Measures to provide financial support and incentives for research, development, and demonstration of technologies to mitigate emissions of greenhouse gases from the manufacture of materials used in construction-related projects, with the objective of accelerating commercial availability of those technologies.
(C)Measures to provide consumer access to building material embodied carbon data reported to the state board.
(m)The Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code) does not apply to reporting regulations and reporting standards promulgated pursuant to this section. Prior to adopting those reporting standards and regulations pursuant to this section, the proposed rulemaking shall be made available to the public and stakeholders for comment and workshopping. The state board, the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission shall exchange technical information with each other as part of this process prior to the adoption of any reporting standard or regulation pursuant to this section. All other regulations adopted pursuant to this section are subject to the Administrative Procedure Act.
(n)Division 13 (commencing with Section 21000) of the Public Resources Code does not apply to the state boards development and approval of the framework and comprehensive strategy developed pursuant to this section.
(o)Paragraphs (1) and (2) of subdivision (i) apply when the state board adopts any mechanism, standard, requirement, regulation, rule, protocol, framework, strategy, credit, target, or establishes an embodied carbon trading system, or alternative incentives or compliance programs, whichever occurs first.
(p)Penalties relating to the use or failure to use low-carbon building materials, or the failure to achieve the applicable target, may not be applied to an entity undertaking the construction of a project that is deemed to comply pursuant to paragraphs (1) and (2) of subdivision (i).
(q)Except as otherwise provided in subdivision (p), penalties for a violation of this section are limited to the penalties described in subdivisions (a) and (d) of Section 42402, unless the violation shows a disregard for the regulations under this section, extreme negligence, or acts of deceit, in which case the penalties set forth in subdivision (b) of Section 42402 apply.
(r)Notwithstanding any other law, the penalties described in subdivision (q) are the exclusive enforcement mechanism against regulated entities for a violation of this section and Section 38561.6.
(s)As used in this section, entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
SEC. 2.Section 38561.4 is added to the Health and Safety Code, to read:38561.4.(a)The state board shall determine that building materials with lower embodied carbon have reached cost parity with conventional building materials before implementing paragraph (1) of subdivision (h) of Section 38561.3 and subparagraph (A) of paragraph (4) of subdivision (c) of, or paragraph (1) of subdivision (d) of, Section 38561.6.
(b)If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the state board shall delay or suspend, as applicable, implementation of Sections 38561.3 and 38561.6 for not less than five years. At the end of the period of delay or suspension, the state board may determine whether building materials with lower embodied carbon have reached cost parity with conventional building materials. If the state board determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, the state board shall again delay or suspend the implementation of those sections for not less than five years. The state board may continue to make that determination and delay or suspend those provisions in accordance with this subdivision until subdivision (a) applies and, at that time, the state board shall implement Sections 38561.3 and 38561.6.
SEC. 3.Section 38561.6 of the Health and Safety Code is amended to read:38561.6.(a)For purposes of this section, the following definitions apply:
(1)Carbon intensity means the quantity of life-cycle greenhouse gas emissions per unit of building material, and specifically the ratio between the net upstream carbon dioxide impact (emissions minus storage) of a material and the weight of the material.
(2)Embodied carbon trading system means a market-based credit trading platform of greenhouse gas emissions exchanges, banking, credits, and other transactions, governed by rules and protocols established by the state board, that result in the same greenhouse gas emission reduction, over the same time period, as direct compliance with a greenhouse gas emission limit or emission reduction measure adopted by the state board pursuant to this division.
(3)Low-carbon building standard means a framework created pursuant to Section 38561.3 to reduce by 40 percent the carbon intensity of the materials used in newly constructed buildings identified in paragraph (1) of subdivision (c) of Section 38561.3 and within the embodied carbon trading system, to facilitate a credit trading platform for building materials along with other requirements as specified.
(4)Material life-cycle means the aggregate of greenhouse gas emissions associated with material production, as defined in the International Organization for Standardization (ISO) 14040 series of standards with a focus on the Product Stage phases (A1-A3).
(5)Entity undertaking the construction of a project means a person or entity who owns the real property that is the subject of a development agreement.
(b)The state board may establish an embodied carbon trading system in compliance with the requirements set forth in Section 38561.3 and this section that meets both of the following requirements:
(1)If the state board opts to establish an embodied carbon trading system, the system shall be designed to be used by entities undertaking a construction project and building material manufacturers.
(2)The embodied carbon trading system unit of measurement shall be Global Warming Potential (GWP) per gross square foot (kg CO2e/sq. ft.2).
(c)The state board shall have the flexibility to design the embodied carbon trading system and may do all of the following with respect to the embodied carbon trading system:
(1)(A)Adopt rules and regulations for the credit allocation approach, the anticipated carbon price in the scheme, and trading periods.
(B)In developing the rules and regulations for the credit allocation approach, including those governing any tradeable compliance instrument, make efforts to avoid an overabundance of compliance credits in the market, and, to this end, may consider setting an upper limit on amount of credits that can be generated per unit of material.
(2)Consider using the credits generated through the use of the embodied carbon trading system to help promote innovation and investment in building construction materials that reduce emissions of greenhouse gases.
(3)Consider all relevant information pertaining to low-carbon building materials reduction programs in other states, localities, and nations, including other states, Canada, and the European Union, and, in doing so, review existing and proposed international, federal, and state greenhouse gas emission reporting programs, make reasonable efforts to promote consistency among the programs established pursuant to this division and other programs, and streamline reporting requirements on greenhouse gas emission sources.
(4)Integrate (A)Except as provided in subparagraph (B), integrate the embodied carbon trading system with the framework described in Section 38561.3 on or before December 31, 2026, and shall implement that system on and after January 1, 2029.
(B)The state board shall delay or suspend the implementation of this paragraph and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(5)Consult with the California Building Standards Commission, the Department of Housing and Community Development, and the State Energy Resources Conservation and Development Commission in the development of building regulations, in order to minimize duplicate or inconsistent regulatory requirements.
(d)The (1)Except as provided in paragraph (2), the state board shall have the discretion to adopt further greenhouse gas emission reduction targets within the scope of Section 38561.3 prior to December 31, 2035, or provide early reduction credit considering market adoption, if appropriate.
(2)The state board shall delay or suspend the implementation of this subdivision and the targets established by this section shall not apply until the state board makes the determination required pursuant to Section 38561.4.
(e)In developing its plan, the state board shall identify opportunities for emission reduction measures from all verifiable and enforceable actions, and best management practices.
(f)(1)The state board may adopt rules and regulations to monitor, verify, and enforce reductions in embodied carbon in building materials pursuant to this section and Section 38561.3. 38561.3, consistent with the requirements of Section 38561.4.
(2)The state board shall minimize the administrative burden of implementing and complying with these regulations when possible.
(3)The state board shall design any rules and regulations to encourage manufacturers of building materials to produce low-carbon materials for sale in California to ensure that entities that undertake construction of projects identified in paragraph (1) of subdivision (c) of Section 38561.3 have an adequate supply of low-carbon materials that meet all of the feasibility and cost impact requirements of subdivision (f) of Section 38561.3 to meet the greenhouse gas reduction targets established in Section 38561.3.
(g)The state board may consider the use of third parties, such as verifiers, for purposes of implementing the requirements of this section.
(h)Compliance mechanisms, reporting requirements, and penalties for noncompliance with any compliance standards or an embodied carbon trading system established pursuant to this section or Section 38561.3 will be determined by the administrative process. The carbon trading system established pursuant to this section alone or in combination with Section 38561.3 shall not cause a project to have a cost impact or be unfeasible not comply with the term feasibility as those terms are defined in subdivision (f) of Section 38561.3.
(i)The state board shall periodically review and update its emission reporting and compliance standard requirements, as necessary.
(j)This section does not limit the state boards ability to establish alternative incentives or compliance programs aside from or in addition to an embodied carbon trading system.
(k)This section provides guidance only. This section does not limit or expand the authority of the state board.
(l)This section does not authorize the creation of a revenue-generating program or any other program that would result in moneys being paid to the state, other than penalties imposed for a violation of this section.
(m)Notwithstanding any other law, the penalties described in subdivision (q) of Section 38561.3 are the exclusive enforcement mechanism against regulated entities for a violation of this section.
SECTION 1.Section 14000 of the Public Resources Code is amended to read:14000.(a)The Legislature hereby finds and declares that every California youth should be encouraged to reach their full potential, but that many youths require guidance and support to reach their goals and make positive changes in their lives.(b)The Legislature finds and declares that conserving or developing natural resources, and enhancing and maintaining environmentally important lands and waters through the use of Californias young adults, is beneficial not only to the youth of the state by providing them with educational and work opportunities, but also is beneficial for the states economy and environment.(c)The Legislature further finds and declares that the California Conservation Corps continues to offer California a unique opportunity to meet both the goal of increasing understanding and appreciation of the environment and the goal of helping youths become productive adults.(d)The Legislature therefore reaffirms its intent that the corps mission includes increasing awareness of and improving our natural resources, but more importantly, includes instilling basic skills and a healthy work ethic in California youth, building their character, self-esteem, and self-discipline, and establishing within them a strong sense of civic responsibility and understanding of the value of a days work for a days wages.(e)It is the further intent of the Legislature that corpsmembers graduate from the corps with good work habits, positive attitudes, and broadened professional horizons. It is the intent of the Legislature that the corps blend academic and job skills training with personal growth opportunities in order to develop productive youths who can make substantial contributions as California workers and citizens.(f)It is the further intent of the Legislature, in memory of Brien Thomas B.T. Collins and John E. Jack Dugan, and on behalf of their passion, support, and commitment to the mission of the corps, to ensure that the corps is an entrepreneurial and incentive-based program with stable and predictable funding. In pursuit of that goal, it is the intent of the Legislature that all state agencies look to the corps first to perform those projects that meet the mission of the corps.(a)The Legislature hereby finds and declares that every California youth should be encouraged to reach their full potential, but that many youths require guidance and support to reach their goals and make positive changes in their lives.
(b)The Legislature finds and declares that conserving or developing natural resources, and enhancing and maintaining environmentally important lands and waters through the use of Californias young adults, is beneficial not only to the youth of the state by providing them with educational and work opportunities, but also is beneficial for the states economy and its environment.
(c)The Legislature further finds and declares that the California Conservation Corps continues to offer California a unique opportunity to meet both the goal of increasing understanding and appreciation of the environment and the goal of helping youths become productive adults.
(d)The Legislature therefore reaffirms its intent that the corps mission includes increasing awareness of and improving our natural resources, but more importantly, includes instilling basic skills and a healthy work ethic in California youth, building their character, self-esteem, and self-discipline, and establishing within them a strong sense of civic responsibility and understanding of the value of a days work for a days wages.
(e)It is the further intent of the Legislature that corpsmembers graduate from the corps with good work habits, positive attitudes, and broadened professional horizons. It is the intent of the Legislature that the corps blend academic and job skills training with personal growth opportunities in order to develop productive youths who can make substantial contributions as California workers and citizens.
(f)It is the further intent of the Legislature, in memory of Brien Thomas B.T. Collins and John E. Jack Dugan, and on behalf of their passion, support, and commitment to the mission of the corps, to ensure that the corps is an entrepreneurial and incentive-based program with stable and predictable funding. In pursuit of that goal, it is the intent of the Legislature that all state agencies look to the corps first to perform those projects that meet the mission of the corps.
|
Date
|
Status
|
|---|---|
| Aug 13, 2026 | In committee: Held under submission. |
| Aug 10, 2026 | In committee: Referred to APPR. suspense file. |
| Jul 29, 2026 | In committee: Hearing postponed by committee. |
| Jun 23, 2026 | Read second time and amended. Re-referred to Com. on APPR. |
| Jun 22, 2026 | From committee: Amend, and do pass as amended and re-refer to Com. on APPR. (Ayes 6. Noes 0.) (June 17). |
| May 27, 2026 | In committee: Set, first hearing. Hearing canceled at the request of author. |
| May 6, 2026 | Referred to Com. on E.Q. |
| Apr 28, 2026 | In Senate. Read first time. To Com. on RLS. for assignment. |
| Apr 27, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 59. Noes 0. Page 4836.) |
| Apr 27, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 59. Noes 0.) |
| Apr 23, 2026 | Read second time. Ordered to third reading. |
| Apr 22, 2026 | From committee: Do pass. (Ayes 13. Noes 0.) (April 22). |
| Apr 9, 2026 | Re-referred to Com. on APPR. |
| Apr 8, 2026 | Read second time and amended. |
| Apr 7, 2026 | From committee: Amend, and do pass as amended and re-refer to Com. on APPR. (Ayes 11. Noes 0.) (April 6). |
| Mar 3, 2026 | Re-referred to Com. on NAT. RES. |
| Mar 2, 2026 | From committee chair, with author's amendments: Amend, and re-refer to Com. on NAT. RES. Read second time and amended. |
| Mar 2, 2026 | Referred to Com. on NAT. RES. |
| Feb 5, 2026 | From printer. May be heard in committee March 7. |
| Feb 4, 2026 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 10, 2026 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Jun 17, 2026 | Do pass as amended, but first amend, and re-refer to the Committee on [Appropriations] | Senate Standing Committee on Environmental Quality |
Passed |
|
| Apr 27, 2026 | AB 1704 Mark González Assembly Third Reading | Assembly Floor |
Passed |
|
| Apr 22, 2026 | Do pass. | Assembly Standing Committee on Appropriations |
Passed |
|
| Apr 6, 2026 | Do pass as amended and be re-referred to the Committee on [Appropriations] | Assembly Standing Committee on Natural Resources |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| American Chemistry Council | ** Support | |
| American Concrete Pipe Association of California (ACPA-CA) | ** Support | |
| American Council for an Energy-efficient Economy | ** Against | |
| American Wood Council | ** Support | |
| Asphalt Roofing Manufacturers Association | ** Support | |
| Associated General Contractors, California Chapters | ** Support | |
| Association of California Water Agencies (ACWA) | ** Support | |
| Building Transparency | ** Against | |
| California Building Industry Association (CBIA) | ** Support | |
| California Chamber Of Commerce | ** Support | |
| CALIFORNIA CONSTRUCTION & INDUSTRIAL MATERIALS ASSOCIATION | ** Support | |
| California Council For Affordable Housing | ** Support | |
| California Legislative Conference Of Plumbing, Heating & Piping Industry | ** Support | |
| California Manufacturers & Technology Association | ** Support | |
| California YIMBY | ** Support | |
| Center for the Built Environment (CBE), UC Berkley | ** Against | |
| E2 | ** Against | |
| Ecological Building Network | ** Against | |
| Fortera | ** Against | |
| Gypsum Association | ** Support | |
| Gypsum Association | ** Support | |
| Housing Action Coalition | ** Support | |
| Industrious Labs | ** Against | |
| Leilac U.S., Inc. | ** Against | |
| National Electrical Contractors Association (NECA) | ** Support | |
| Natural Resources Defense Council (NRDC) | ** Against | |
| North American Insulation Manufacturers Association | ** Support | |
| North American Insulation Manufacturers Association (UNREG) | ** Support | |
| Northern California Allied Trades | ** Support | |
| Pci West | ** Support | |
| Polyisocyanurate Insulation Manufacturers Association | ** Support | |
| Polyisocyanurate Insulation Manufacturers Association, the (PIMA) | ** Support | |
| Project 2030 | ** Against | |
| Public Citizen | ** Against | |
| Resilient Floor Covering Institute (RFCI) | ** Support | |
| Sierra Club | ** Against | |
| SOUTHERN CALIFORNIA GLASS MANAGEMENT ASSOCIATION (SCGMA) | ** Support | |
| Spray Foam Coalition | ** Support | |
| Spray Foam Coalition | ** Support | |
| Structural Engineers Association of California | ** Against | |
| United Contractors (UCON) | ** Support | |
| USGBC California | ** Against | |
| U.S. Green Building Council | ** Against | |
| Wall and Ceiling Alliance | ** Support | |
| Western Painting and Coating Contractors Association | ** Support | |
| Western Wood Preservers Institute | ** Support |
SENATE COMMITTEE ON
Senator Sabrina Cervantes, Chair
2025 - 2026 Regular Session
AB 1704 (Mark González) - Greenhouse gases: embodied carbon building materials
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
This bill would delay implementation of the state's embodied carbon building material requirements until the California Air Resources Board (CARB) determines that lower embodied carbon materials would be cost effective compared to conventional materials, as specified.
Fiscal Impact:
- To the extent that greenhouse gas (GHG) emissions reductions would have otherwise been achieved under the embodied carbon framework and implementation of that framework is delayed or suspended as a result of this bill, unknown cost pressures (GHG Reduction Fund or other fund) to backfill these emission reductions elsewhere in order to maintain progress toward statewide targets.
- Potential deferred fee revenue of an unknown amount for each year in which the embodied carbon framework is not implemented (Cost of Implementation Account), as the reporting-mechanism fee authorized under existing law would not be collected. This would be offset by lower CARB administrative costs during the same period.
Background:
"Embodied carbon" refers to the GHG emissions arising from the manufacturing, transportation, installation, maintenance, and disposal of building materials — as distinct from the operational carbon of heating, cooling, and running a building. According to the 2021 Integrated Energy Policy Report, on average up to 50 percent of a new building's total GHG emissions over a 30-year life are embodied carbon from initial construction, with nearly 70 percent of that attributable to six materials, led by concrete and steel.
The framework and its deadlines. California's embodied carbon reduction framework, enacted by AB 2446 (Holden, 2022) and expanded by AB 43 (Holden, 2023), is codified in Health and Safety Code §§ 38561.3 and 38561.6 and is administered by the California Air Resources Board (CARB).Existing law requires CARB to develop a framework for measuring the average carbon intensity of materials used in the construction of new buildings by December 31, 2026, and to develop a comprehensive strategy for the building sector to achieve a 40 percent net reduction in GHG emissions of building materials as soon as possible, but no later than December 31, 2035, with the strategy due by December 31, 2028. These dates reflect delays enacted by SB 123 (2023), which moved the framework deadline from July 1, 2025 to December 31, 2026, the strategy deadline to December 31, 2028, and the feasibility and cost impact evaluation deadline by six months. The framework's targets apply no sooner than January 1, 2027, and two years after the baseline is established, with the baseline set from an industry average of environmental product declarations reported for the 2026 calendar year. Existing law also authorizes, but does not require, CARB to establish an embodied carbon trading system, to be integrated with the framework and implemented on and after January 1, 2029. CARB's embodied carbon program is in active development: staff's tentative timeline runs through workshops and a board hearing toward adoption of the reporting framework by December 31, 2026, with mandatory reporting to begin thereafter.
Compliance cost limits in existing law. The framework carries cost-containment features for covered projects: the incorporation of lower carbon materials must be limited or excluded to the extent it is unfeasible or has a "cost impact," defined as a significant — 5 percent or more — increase in operational or overall material cost or schedule delay attributable to the lower carbon material relative to the baseline material. A project that cannot achieve the applicable target within those limits is deemed to comply, and no penalties relating to the use or failure to use low-carbon materials may be applied to a deemed-compliant project. CARB has no authority to approve, deny, or delay the planning, use, development, design, or construction of a project.
State procurement and federal funding conditions. Separately from the CARB framework, the Buy Clean California Act requires the Department of General Services (DGS) to establish and publish maximum acceptable global warming potential limits for four eligible materials — structural steel, concrete reinforcing steel, flat glass, and mineral wool board insulation — used in public works projects, relying on environmental product declarations. At the federal level, the Inflation Reduction Act invested $350 million in grants, technical assistance, and tools to help manufacturers, buyers, and builders measure, report, and lower embodied carbon in construction materials; the Senate Environmental Quality Committee analysis notes that much, if not all, of that funding has not materialized following federal curtailment.
Proposed Law:
This bill would:
- Require CARB to delay implementation of specified elements of AB 2446/AB 43 until CARB determines that using building materials with lower embodied carbon would be cost effective during the first two-year period of their use compared to using conventional building materials.
- Stipulate that if CARB does not make the above finding, it must delay or suspend implementation for no less than five years, after which the same determination will still be required before implementation proceeds.
Related Legislation:
AB 43 (Holden, 2023) made a number of changes to the provisions created by AB 2446 (Holden, 2022), and expanded the framework created therein by including authority for CARB to establish an embodied carbon trading system.
AB 2446 (Holden, 2022) required CARB to develop a framework for measuring and reducing carbon emissions associated with new building construction.
Staff Comments:
Statewide climate targets. The California Global Warming Solutions Act of 2006 (AB 32, Núñez) required statewide greenhouse gas (GHG) emissions to return to 1990 levels by 2020, and SB 32 (Pavley, 2016) requires statewide emissions to be reduced to at least 40 percent below the 1990 level by 2030. The California Climate Crisis Act (AB 1279, Muratsuchi, 2022) declares the policy of the state to achieve net zero GHG emissions as soon as possible, but no later than 2045, to achieve and maintain net negative emissions thereafter, and to ensure that by 2045, statewide anthropogenic GHG emissions are reduced to at least 85 percent below 1990 levels — codifying the statewide carbon neutrality goal first established by a 2018 executive order. CARB's scoping plan, updated at least once every five years, identifies the measures for achieving these targets across sectors, including the building sector.
Fee and penalty revenue. Under existing law, the embodied carbon framework may include a tracking and reporting mechanism, and existing law (HSC § 38561.3) permits CARB to charge participants a fee only to reimburse its administrative costs of administering that reporting mechanism, prohibiting any other charges on participants. HSC § 38561.6 does not authorize the creation of a revenue-generating program or any other program resulting in moneys being paid to the state, other than penalties. Penalties are limited to the amounts described in specified subdivisions of § 42402, with higher penalties reserved for disregard of the regulations, extreme negligence, or acts of deceit, and these penalties are the exclusive enforcement mechanism against regulated entities. Absent the framework, these penalty revenues may also be forgone, although they would likely be minor.
-- END --
SENATE COMMITTEE ON ENVIRONMENTAL QUALITY
Senator Blakespear, Chair
2025 - 2026 Regular
Bill No: AB 1704
Author: | Mark González | ||
Version: | 4/8/2026 | Hearing Date: | 6/17/2026 |
Urgency: | No | Fiscal: | Yes |
Consultant: | Heather Walters | ||
SUBJECT: Greenhouse gases: embodied carbon building materials
DIGEST: This bill requires the California Air Resources Board to find that lower embodied carbon building materials have reached cost parity with conventional materials before implementing provisions of previous laws intended to achieve reductions in embodied carbon in building materials.
ANALYSIS:
Existing law:
- Establishes the California Energy Resources Conservation and Development Commission (CEC) within the California Natural Resources Agency (CNRA), as the state's primary energy policy and planning agency. (Public Resources Code (PRC) § 25200 et seq.)
- Establishes the Air Resources Board (CARB) as the air pollution control agency in California and requires CARB, among other things, to control emissions from a wide array of mobile sources and coordinate, encourage, and review the efforts of all levels of government as they affect greenhouse gases (GHG) emissions. (Health and Safety Code (HSC) § 39500 et seq.)
- Requires, under the Buy Clean California Act (BCCA), the Department of General Services (DGS), in consultation with CARB, to establish and publish the maximum acceptable Global Warming Potential (GWP) limit for four eligible materials: structural steel, concrete reinforcing steel, flat glass, and mineral wool board insulation. Further states that when used in public works projects, these eligible materials must have a GWP that does not exceed the limit set by DGS. (Public Contract Code § 3500-3505)
- Requires CARB to develop by July 1, 2023, a comprehensive strategy for the state's cement sector to achieve net-zero GHG emissions no later than December 31, 2045. (HSC § 38561.2)
- Under AB 2446 (Holden, Chapter 352, Statutes of 2022), and AB 43 (Holden, Chapter 316, Statutes of 2023) among other things:
- Authorized CARB to establish an embodied carbon trading system.
- Requires CARB to develop, in consultation with specified stakeholders, a framework for measuring and then reducing the average CI of the materials used in the construction of specified new buildings, towards the interim goal of a 20% net reduction by December 31, 2030 and the goal of a 40% net reduction by December 31, 2035.
- Defines the following terms:
- Feasibility with regards to impacts on project timing, economics, environmental impacts, health, safety, equivalent functions, commercial availability, reliability, and useful life, among other considerations; and
- “Cost impact” to mean an increase of 5% or more in the operational or overall material cost of a project because of the use of lower carbon material.
- Stipulates that if the entity undertaking the construction of a project finds that it is unable to achieve the applicable target due to unfeasibility or cost impacts, as defined, (and there are no alternative materials or methods that are feasible and without cost impact that would allow the project to achieve the target) then the project shall be deemed to comply with the applicable target. Directs CARB to form and maintain a technical advisory committee composed of representatives of building product manufacturers, builders, and design professionals.
This bill:
- Requires CARB to delay implementation of specified elements of AB 2446/AB 43 until CARB determines that building materials with lower embodied carbon have reached cost parity with conventional building materials.
- Stipulates that if CARB does not make the above finding, they must delay or suspend implementation for no less than five years, after which the same determination will still be required before implementation proceeds.
Background
- Embodied carbon. The term “embodied carbon” refers to the GHG emissions arising from the manufacturing, transportation, installation, maintenance, and disposal of building materials. The majority of a building’s total embodied carbon is released upfront at the beginning of a building’s life. Unlike with “operational carbon” (the emissions associated with heating, cooling, and otherwise operating a building), there is no chance to decrease embodied carbon with updates in efficiency after the building is constructed.
In order to determine the emissions associated with building materials, the entire life cycle of those products must be considered. Life cycle analysis (LCA) is a method of quantifying the environmental impacts associated with a given product. In LCA, researchers create an inventory of resources used and pollutants generated in product production and use. LCAs can vary depending on the assumptions made and the extent of the life cycle considered. Notably, for LCAs of building materials, assessments are usually either cradle-to-gate or cradle-to-grave. Cradle-to-gate LCAs consider the emissions associated from extraction up until arrival at the project site, while cradle-to-grave continue further to consider any emissions associated with the product’s use within the project and building and, ultimately, its end of life.
The CEC is required (by SB 1389, Bowen and Sher, Chapter 568, Statutes of 2002) to regularly produce an Integrated Energy Policy Report (IEPR) to assess and forecast all aspects of energy industry supply, production, transportation, delivery and distribution, demand, and prices.
The IEPR from 2021, within its volume on building decarbonization, had a section on embodied carbon, and a subsection on embodied carbon in building materials. It reported that in new building projects, on average, up to 50 percent of total GHG emissions, considered over a 30-year building life, are from the embodied carbon associated with the initial construction, and nearly 70 percent of that is from just six materials — concrete and steel (by far the most significant), flat glass, insulation, masonry, and wood products. There are, however, significant variations in estimations of the contribution of embodied carbon to the lifetime emissions from a building that warrant further analysis and contextualization for California.
Ultimately, the IEPR concluded that, “…there is enormous potential for innovation and use of low-carbon products in the built environment. Further research and development are needed, as well as collaboration with other jurisdictions, to develop best practices for reducing embodied carbon in buildings. Also, city planners, designers, and architects could benefit from greater clarity around low-carbon label claims and material-neutral embodied carbon standards.” - Buy Clean California Act. A first in the nation and widely emulated, the Buy Clean California Act (BCCA) is an innovative program establishing limits on embodied carbon emissions and construction materials procured by the state for public construction projects. The law requires the California Department of General Services (DGS) to publish, by January 1, 2022, acceptable maximum Global Warming Potential (GWP) limits for the following eligible materials: structural steel, concrete reinforcing steel (rebar), flat glass, and mineral wool board insulation. In order to determine and compare the GWPs of different products and materials, DGS relies on Environmental Product Declarations (EPDs).
An EPD tells the life cycle story of a product in a single, comprehensive report. The EPD provides information about a product’s impact upon the environment, such as global warming potential, smog creation, ozone depletion and water pollution. With an EPD, manufacturers report comparable, objective, and third-party verified data that helps purchasers better understand a product’s sustainable qualities and environmental repercussions so they can make more informed product selections. EPDs are typically cradle-to-gate analyses, which makes sense since they are used partly to determine which products to acquire for a given project. - Reducing embodied carbon with the Inflation Reduction Act. The Inflation Reduction Act (IRA) invests $350 million for grants, technical assistance and tools, including carbon labeling, to help manufacturers, institutional buyers, real estate developers, builders, and others measure, report, and substantially lower the levels of embodied carbon and other GHG emissions associated with all relevant stages of production, use and disposal of construction materials and products including steel, concrete, asphalt and glass. The IRA was significantly curtailed by the Trump administration, so much—if not all—of the $350 million intended for investments has not materialized.
Comments
- Purpose of Bill. According to the author, “AB 1704 balances housing affordability while maintaining the sustainability standards of California. With the ongoing housing crisis, California must act strategically when implementing policies that could increase housing costs. My district has a 23% poverty rate, and nearly 90% of the residents are renters. Most are already rent burdened, paying more than 30% of their income for rent. AB 1704 will help us avoid any unintended consequences of enforcing embodied carbon standards on our most vulnerable communities. California can’t just say ‘affordability,’ we have to execute it on every front.”
- Weighing priorities. The existing laws regarding California’s embodied carbon targets include an important offramp for compliance in the program. Specifically, “significant cost impacts” are defined as an increase of 5% or more in the operational or material costs attributable to lower-carbon materials, and the law stipulates that if the cost would exceed that 5% limit, the project will be deemed to comply with the law.
The real-world effect of these cost impact provisions can be viewed in multiple ways. On one hand, it means compliance with AB 2446/AB 43 cannot—no matter the cost of lower-carbon materials—increase the cost of a project by more than 5%. On the other hand, if lower-carbon materials are consistently more expensive, every building project in California could cost 5% more across the board. This is not a question of what is the “correct” amount of costs to be added to meet our carbon reduction goals; it is a judgement call to be made by policymakers and is likely to be shaped by the current political reality. Although an up-to-5% increase in costs seemed worth it for the carbon reductions in 2022, that may no longer be the case. California’s international leadership in this space is noteworthy and means the decision to shelve the program should not be taken lightly. Nevertheless, if the Legislature no longer feels these goals and protections are desirable, it is the Legislature’s prerogative to change them.
However, the above scenarios all assume lower-carbon building materials are significantly more expensive. Recent and ongoing research suggests that, in some circumstances, lower-carbon building materials may in fact be equivalent or less expensive. Particularly given the fact that more detailed information is expected to be available from work currently underway at the UC Berkeley Center for the Built Environment, it may be hasty and shortsighted to have CARB make strict determinations just on the basis of “cost parity”.
Given the extent to which material costs are more complicated than simply determining “cost parity”, the committee may wish to amend AB 1704 to have CARB instead make their determination on the basis of whether using lower embodied carbon materials would be cost effective during the first two-year period of their use compared to using conventional building materials. - Brick by brick. As written today, AB 1704 applies equally across the entirety of materials covered by AB 2446/AB 43. As noted above, new information coming to light suggests that for some product categories, cost parity may have already been achieved. Although care should be taken so as to not overcomplicate the regulatory process, there may be benefits to providing CARB greater latitude in determining which (if any) categories should be delayed. Given the complexity of the program and the evolving market, such tweaks may be better addressed through the regulatory process rather than enshrined in statute.
- Committee amendments. Committee staff recommends the bolded amendments in comment 2 above.
Related/Prior Legislation
AB 2446 (Holden, Chapter 352, Statutes of 2022) required CARB to develop a framework for measuring and reducing carbon emissions associated with new building construction.
AB 43 (Holden, Chapter 316, Statutes of 2023) made a number of changes to the provisions created by AB 2446, and expanded the framework created therein by including authority for CARB to establish an Embodied Carbon Trading System.
SOURCE:
Author
SUPPORT:
American Chemistry Council
American Concrete Pipe Association of California (ACPA-CA)
American Wood Council
Asphalt Roofing Manufacturers Association
Associated General Contractors, California Chapters
Association of California Water Agencies (ACWA)
California Building Industry Association (CBIA)
California Chamber of Commerce
California Construction & Industrial Materials Association
California Council for Affordable Housing
California Legislative Conference of Plumbing, Heating & Piping Industry
California Manufacturers & Technology Association (CMTA)
California Manufacturers and Technology Association
California Yimby
Gypsum Association
Housing Action Coalition
National Electrical Contractors Association (NECA)
North American Insulation Manufacturers Association
Northern California Allied Trades
Pci West
Polyisocyanurate Insulation Manufacturers Association
Resilient Floor Covering Institute (RFCI)
Southern California Glass Management Association (SCGMA)
Spray Foam Coalition
United Contractors (UCON)
Wall and Ceiling Alliance
Western Painting and Coating Contractors Association
Western Wood Preservers Institute
OPPOSITION:
American Council for an Energy-efficient Economy
Building Transparency
Center for the Built Environment (CBE), UC Berkley
E2
Fortera
Industrious Labs
Leilac U.s., INC.
Natural Resources Defense Council (NRDC)
Project 2030
Public Citizen
Sierra Club
Structural Engineers Association of California
U.s. Green Building Council
Usgbc California
-- END --
ASSEMBLY THIRD READING
ATR Bill Id:AB 1704
Author:(Mark González)
As Amended Ver:April 8, 2026
Majority vote
SUMMARY
Requires the Air Resources Board (ARB) to determine whether the cost of building materials with lower embedded carbon have reached cost parity with conventional building materials and to delay implementation of specified requirements to reduce the greenhouse gas (GHG) emissions of building materials and implementation of an embodied carbon trading system for building materials for at least five years, not to exceed 10 years, if parity is not achieved.
Major Provisions
- Requires ARB to delay or suspend the implementation of the targets established by ARB pursuant to House and Safety Code (HSC) 38561.3 and HSC 38561.6 until ARB makes a determination that building materials with lower embodied carbon have reached cost parity with conventional building materials.
- If ARB determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, authorizes ARB to delay or suspend, as applicable, implementation of HSC 38561.3 and 38561.6 for not less than five years, not to exceed 10 years.
COMMENTS
AB 2446 (Holden), Chapter 352, Statutes of 2022, requires ARB to develop a framework for measuring and reducing GHG emissions associated with new building construction. This bill requires the framework to include a comprehensive strategy to achieve a 40% net reduction in the carbon intensity of construction and materials used in new construction as soon as possible, but no later than December 31, 2035, and an interim target to achieve a 20% net reduction in carbon intensity by the end of 2030. AB 2446 requires ARB to evaluate the cost impact and feasibility of implementation of the strategy for the purpose of developing recommendations to address known cost impacts and feasibility issues and limits or excludes the incorporation of lower carbon materials to the extent that their use has a cost impact or is infeasible. The bill established parameters for feasibility, including consideration of material performance and availability, and cost impacts, which is defined as any cost increase of 5% or more.
AB 43 (Holden), Chapter 316, Statutes of 2023, requires ARB to develop a market-based embodied carbon trading system to facilitate compliance with the state’s strategy to reduce the carbon intensity of building materials by 40% by 2035.
ARB held its first workshop to begin implementing AB 2446 and AB 43 in September of 2024, and held additional workshops in March, September, and October of 2025. The meetings have covered information on building material reporting, project reporting, establishing methodologies to estimate a baseline, and provided an opportunity for stakeholder input and public comments.
As part of its implementation work, ARB has contracted with the UC Berkeley College of Environmental Design and the Center for the Built Environment to assess the GHG emission reduction potential and associated costs of material efficiency, reuse, and substitution strategies that can be incorporated into future decarbonization policy for the built environment. The project began in June of 2025, and is scheduled to be completed mid-2027.
This bill is intended to improve housing affordability by pausing the implementation of AB 2446 and AB 43 until ARB makes a determination that lower carbon intensity construction materials achieve cost parity with conventional building materials.
According to the Author
AB 1704 balances housing affordability while maintaining the sustainability standards of California. With the ongoing housing crisis, California must act strategically when implementing policies that could increase housing costs. My district has a 23% poverty rate, and nearly 90% of the residents are renters. Most are already rent burdened, paying more than 30% of their income for rent. AB 1704 will help us avoid any unintended consequences of enforcing embodied carbon standards on our most vulnerable communities. California can't just say ‘affordability,' we have to execute it on every front.
Arguments in Support
California YIMBY notes that as California continues to face a severe housing deficit that has driven up costs for renters and homebuyers, "climate policies must be implemented in ways that do not unintentionally increase housing construction costs or delay urgently needed housing production," and that by ensuring new regulatory requirements "align with market readiness, this bill helps prevent additional cost burdens that could otherwise make housing development more difficult or expensive."
Arguments in Opposition
A coalition of environmental organizations argues that the cost parity provision in the bill is unnecessary since regulations to implement AB 2446 already must consider costs, feasibility, and economic benefits. They further argue, among other things, that a strict cost parity requirement "sets a high bar for emerging materials at an early stage of market development," and that in other sectors, including solar and electric vehicles, "California has often prioritized early deployment and market formation, which in turn, helped drive down cost reductions and reach long-term affordability for these products."
FISCAL COMMENTS
ARB, the California Energy Commission (CEC), and the Building Standards Commission (BSC) anticipate minor and absorbable costs as a result of this bill.
Budget trailer language in 2023 changed the deadlines in AB 2446 from July 1, 2025, to December 31, 2026 (for the development of the framework) and to 2028 (for the comprehensive strategy.) In addition, the 2023 Budget Act included:
1) $5.7 million from the Cost of Implementation Account (COIA) in 2023-24 and 2024-25 (decreasing to $4.5 million in 2025-26 and ongoing) for 15 permanent positions and contract services to develop and implement a framework to reduce embodied carbon emissions from building materials, as required by AB 2446. According to ARB, all 15 positions have been filled. ARB will likely rely on a subset of these existing staff to conduct the cost parity analysis required by this bill.
2) $238,000 from COIA in 2023-24 and ongoing for one permanent position at the CEC to implement the requirements of AB 2446. CEC’s Efficiency Division has been in ongoing consultation with and providing technical assistance to ARB on AB 2446 implementation, including by attending ARB's embodied carbon workshops as ARB develops the carbon intensity measurement framework targeted for adoption later this year.
3) $596,000 in 2023-24 and $535,000 in 2024-25 and 2025-26 from the Building Standards Administration Special Revolving Fund for two positions at the BSC to meet numerous legislative mandates, including AB 2446. BSC partnered with the Division of the State Architect to form the California Carbon Reduction Collaborative and promulgate the nation's first mandatory embodied carbon reduction building standards for nonresidential construction. Accordingly, BSC has been coordinating with ARB on AB 2446 by attending ARB’s workshops and offering ARB its technical expertise.
Should ARB pause or suspend implementation of the embodied carbon laws, it is not clear if the ongoing funding and positions at the three agencies will be redirected to other internal priorities and programs.
VOTES
ASM NATURAL RESOURCES: 11-0-3
YES: Bryan, Ellis, Alanis, Garcia, Haney, Hoover, Macedo, Boerner, Pellerin, Schultz, Wicks
ABS, ABST OR NV: Connolly, Kalra, Zbur
ASM APPROPRIATIONS: 13-0-2
YES: Wicks, Hoover, Arambula, Caloza, Dixon, Fong, Mark González, Krell, Pacheco, Pellerin, Solache, Ta, Tangipa
ABS, ABST OR NV: Calderon, Muratsuchi
UPDATED
VERSION: April 8, 2026
CONSULTANT: Elizabeth MacMillan / NAT. RES. / (916)319- 2092 FN: 0002390
Date of Hearing: April 22, 2026
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
ABPCA Bill Id:AB 1704
Author:(Mark González) – As Amended Ver:March 2, 2026
Policy Committee: | Natural Resources | Vote: | 11 - 0 |
|
| ||
|
|
Urgency: No State Mandated Local Program: No Reimbursable: No
SUMMARY:
This bill requires the Air Resources Board (ARB) to (a) determine whether the cost of building materials with lower embodied carbon have reached cost parity with conventional building materials before implementing certain laws to reduce the greenhouse gas (GHG) emissions of building materials, and, if it finds that the materials have not reached cost parity, (b) to delay or suspend implementation of the laws for at least five years, not to exceed 10 years in total.
The two laws subject to pause or suspension are (1) the requirement that ARB develop a framework for measuring and then reducing the carbon intensity of the building materials used in the construction of new buildings (AB 2446 (Holden), Chapter 352, Statutes of 2022) and (2) authorization for ARB to create an embodied carbon trading system to implement the provisions of the law described above (AB 43 (Holden), Chapter 316, Statutes of 2023).
FISCAL EFFECT:
ARB, the California Energy Commission (CEC), and the Building Standards Commission (BSC) anticipate minor and absorbable costs as a result of this bill.
Budget trailer language in 2023 changed the deadlines in AB 2446 from July 1, 2025, to December 31, 2026 (for the development of the framework) and to 2028 (for the comprehensive strategy.) In addition, the 2023 Budget Act included:
1) $5.7 million from the Cost of Implementation Account (COIA) in 2023-24 and 2024-25 (decreasing to $4.5 million in 2025-26 and ongoing) for 15 permanent positions and contract services to develop and implement a framework to reduce embodied carbon emissions from building materials, as required by AB 2446. According to ARB, all 15 positions have been filled. ARB will likely rely on a subset of these existing staff to conduct the cost parity analysis required by this bill.
2) $238,000 from COIA in 2023-24 and ongoing for one permanent position at the CEC to implement the requirements of AB 2446. CEC’s Efficiency Division has been in ongoing consultation with and providing technical assistance to ARB on AB 2446 implementation, including by attending ARB’s embodied carbon workshops as ARB develops the carbon intensity measurement framework targeted for adoption later this year.
3) $596,000 in 2023-24 and $535,000 in 2024-25 and 2025-26 from the Building Standards Administration Special Revolving Fund for two positions at the BSC to meet numerous legislative mandates, including AB 2446. BSC partnered with the Division of the State Architect to form the California Carbon Reduction Collaborative and promulgate the nation’s first mandatory embodied carbon reduction building standards for nonresidential construction. Accordingly, BSC has been coordinating with ARB on AB 2446 by attending ARB’s workshops and offering ARB its technical expertise.
Should ARB pause or suspense implementation of the embodied carbon laws, it is not clear to the committee if the ongoing funding and positions at the three agencies will be redirected to other internal priorities and programs.
COMMENTS:
1) Purpose. According to the author:
AB 1704 balances housing affordability while maintaining the sustainability standards of California. With the ongoing housing crisis, California must act strategically when implementing policies that could increase housing costs. My district has a 23% poverty rate, and nearly 90% of the residents are renters. Most are already rent burdened, paying more than 30% of their income for rent. AB 1704 will help us avoid any unintended consequences of enforcing embodied carbon standards on our most vulnerable communities. California can’t just say ‘affordability,’ we have to execute it on every front.
2) Background. AB 2446 requires ARB, by July 1, 2025, to develop a framework for measuring and then reducing the carbon intensity of the building materials used in the construction of new buildings. AB 2446 requires ARB to develop a comprehensive strategy for the state’s building sector to achieve a 40% net reduction in GHGs of building materials no later than December 31, 2035, and requires ARB to take certain specified actions to facilitate the achievement of these goals. AB 43 authorizes ARB to create an embodied carbon trading system to implement provisions of AB 2446 and makes other revisions to the AB 2446 framework.
ARB held its first workshop to begin implementing AB 2446 and AB 43 in September of 2024, and held additional workshops in March, September, and October of 2025, to receive feedback from stakeholders. At these meetings, ARB staff presented information on the technical work being done to develop an embodied carbon reporting regulation pursuant to AB 2446 and AB 43, and to request feedback from interested parties who may have expertise in manufacturing, importing, or retailing of building materials, as well as those with expertise in planning, developing, designing, and constructing buildings.
As part of its implementation, ARB has contracted with the University of California, Berkeley College of Environmental Design and the Center for the Built Environment to assess the GHG emission reduction potential and associated costs of material efficiency, reuse, and substitution strategies that can be incorporated into future decarbonization policy for the built environment. The project began in June of 2025 and is scheduled to be completed in by the end of January 2027.
Among other organizations in support of the bill, California YIMBY notes that as California continues to face a severe housing deficit that has driven up costs for renters and homebuyers, “climate policies must be implemented in ways that do not unintentionally increase housing construction costs or delay urgently needed housing production,” and that by ensuring new regulatory requirements “align with market readiness, this bill helps prevent additional cost burdens that could otherwise make housing development more difficult or expensive.”
Writing in opposition, a coalition of environmental organizations argues that the cost parity provision in the bill is unnecessary since regulations to implement AB 2446 already must consider costs, feasibility, and economic benefits. They further argue, among other things, that a strict cost parity requirement “sets a high bar for emerging materials at an early stage of market development,” and that in other sectors, including solar and electric vehicles, “California has often prioritized early deployment and market formation, which in turn, helped drive down cost reductions and reach long-term affordability for these products.”
Analysis Prepared by: Nikita Koraddi / APPR. / (916) 319-2081
Date of Hearing: April 6, 2026
ASSEMBLY COMMITTEE ON NATURAL RESOURCES
Isaac G. Bryan, Chair
ABPCA Bill Id:AB 1704 (
Author:Mark González) – As Amended Ver:March 2, 2026
SUBJECT: Greenhouse gases: embodied carbon building materials
SUMMARY: Requires the Air Resources Board (ARB) to determine whether the cost of building materials with lower embedded carbon have reached cost parity with conventional building materials and to delay implementation of specified requirements to reduce the greenhouse gas (GHG) emissions of building materials and implementation of an embodied carbon trading system for building materials until cost parity is achieved.
EXISTING LAW:
- Requires ARB, pursuant to California Global Warming Solutions Act of 2006 [AB 32 (Núñez), Chapter 488, Statutes of 2006], to adopt a statewide GHG emissions limit equivalent to 1990 levels by 2020 and adopt regulations to achieve maximum technologically feasible and cost-effective GHG emission reductions. AB 32 authorizes ARB to permit the use of market-based compliance mechanisms to comply with GHG reduction regulations once specified conditions are met. Requires ARB to approve a statewide GHG emissions limit equivalent to 85% below the 1990 level by 2045. (Health and Safety Code (HSC) 38500-38599.11)
- Requires, under the Buy Clean California Act (BCCA) the Department of General Services (DGS), in consultation with ARB, to establish and publish the maximum acceptable Global Warming Potential (GWP) limit for eligible materials: carbon steel rebar, flat glass, insulation, and structural steel. Further states that when used in public works projects, these eligible materials must have a GWP that does not exceed the limit set by DGS. (Public Contract Code 3500-3505)
- Pursuant to HSC 38561.3:
- Requires ARB to develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings by December 31, 2026.
- Requires ARB to develop a comprehensive strategy, by December 31, 2028, to achieve a 40% net reduction in the carbon intensity of construction and materials used in new construction as soon as possible, but no later than December 31, 2035. Specifies that the targets begin to apply no sooner than January 1, 2027, and two years after the baseline is established.
- Authorizes ARB to include a tracking and reporting mechanism in the framework and charge a fee that may only cover ARB’s costs to administer the reporting mechanism.
- Requires ARB to evaluate the cost impact and feasibility of implementation of the strategy for the purpose of developing recommendations to address known cost impacts and feasibility issues. Specifies that the incorporation of lower carbon materials is limited or excluded to the extent that it as a cost impact or is infeasible, as specified.
- Defines “cost impact” as a significant overall material or operation cost increase, which is specified as any cost increase of 5% or more, or a schedule delay resulting from incorporating the lower carbon material, as specified. States that the incorporation of lower carbon materials shall be limited or excluded only to the extent that it has a cost impact or is infeasible.
- Requires ARB to develop a framework for measuring the average carbon intensity of the materials used in the construction of new buildings by December 31, 2026.
- Pursuant to HSC 38561.6:
- Authorizes ARB to establish an embodied carbon trading system in compliance with the requirements of HSC 38561.3.
- Integrate the embodied carbon trading system with the framework established pursuant to HSC 38561.3 on or before December 31, 2026, and implement the system on and after January 1, 2029.
- Authorizes ARB to adopt further GHG emissions reduction targets within the scope of HSC 38561.3 prior to December 31, 2035, or provide early reduction credit considering market adoption, if appropriate.
- Specifies that compliance mechanisms, reporting requirements, and penalties for noncompliance with any compliance standards or an embodied carbon trading system will be determined by the administrative process. Specifies that the carbon trading system shall not cause a project to have a cost impact or be unfeasible, as specified.
- Authorizes ARB to establish an embodied carbon trading system in compliance with the requirements of HSC 38561.3.
THIS BILL:
- Requires ARB to delay or suspend the implementation of the targets established by ARB pursuant to HSC 38561.3 and HSC 38561.6 until ARB makes a determination that building materials with lower embodied carbon have reached cost parity with conventional building materials.
- If ARB determines that building materials with lower embodied carbon have not reached cost parity with conventional building materials, authorizes ARB to delay or suspend, as applicable, implementation of HSC 38561.3 and 38561.6 for not less than five years. At the end of a period of delay or suspension, authorizes ARB to determine whether building materials with lower embedded carbon have reached cost parity with conventional building materials. If it again finds that the materials have not reached cost parity, requires ARB to again delay or suspend those requiements for not less than five years. Repeats this process until ARB determines that cost parity has been achieved.
FISCAL EFFECT: Unknown
COMMENTS:
- Embodied carbon. The term “embodied carbon” refers to the GHG emissions arising from the manufacturing, transportation, installation, maintenance, and disposal of building materials. The majority of a building’s total embodied carbon is released upfront at the beginning of a building’s life. Unlike with operational carbon, there is no opportunity to decrease embodied carbon with updates in efficiency after the building is constructed.
In California, according to ARB’s GHG Emission Inventory, residential and commercial buildings account for more than 10% of the state’s total GHG emissions. However, residential and commercial buildings are responsible for roughly 25% of California’s GHG emissions when accounting for fossil fuels consumed onsite and electricity demand. Refrigerants used in heating and cooling systems also contribute to building-related GHG emissions. It is unclear what the exact breakdown is between embodied and operating emissions, but due to California’s mild climate, increasing renewable electricity supply, and relatively efficient building stock, our state’s operational emissions may be a smaller percentage of total building energy use, compared to the embodied carbon in new construction. - Reducing building emissions. Achieving net zero GHG emissions – when GHG emissions are either zero or are offset by equivalent atmospheric GHG removal – is an important part of reducing GHG emissions and minimizing the effects of climate change. Net zero GHG emissions is also often used interchangeably with carbon neutrality; however, net zero GHG emissions includes GHGs other than those that contain carbon, such as nitrous oxide. Constructing buildings to be net zero will substantially reduce the state’s GHG emissions.
Building materials, depending on how they are manufactured, can be considered to sequester carbon. For example, the carbon that comprises wood (roughly 50% by weight) is from the carbon dioxide (CO₂) the tree absorbed from the air. California policies typically consider a 100-year time horizon for the sequestration to be considered permanent. Thus, if CO₂ could be reliably and accountably stored in building as wood for at least a century, those could potentially be counted as sequestered. Given California’s stated goal of net zero GHG emissions by 2045, there is a need for GHG emissions to be balanced by GHG sequestration. - California Green Building Standards Code. The California Green Building Standards Code (CalGreen) (Part 11, Title 24, California Code of Regulations) is the first mandatory green building standards code in the country. Developed in 2007 by the California Building Standards Commission (BSC), the code is an effort to meet the goals of California’s ambitious GHG emission reduction goals. CalGreen is updated every three years, with the most recent update going into effect on January 1, 2026, and establishes regulatory requirements for energy efficiency, water efficiency and conservation, material conservation and resource efficiency, and environmental quality. Mandatory requirements apply to commercial, residential, and public school buildings, while additional voluntary standards are included for these building types and hospitals.
- Buy Clean California Act. The BCCA establishes limits on embodied carbon emissions and construction materials procured by the state for public construction projects. By January 1, 2022, the law requires DGS to publish acceptable maximum GWP limits for structural steel, concrete reinforcing steel (rebar), flat glass, and mineral wool board insulation. In order to determine and compare the GWPs of different products and materials, DGS relies on environmental product declarations (EPDs).
- Environmental product declarations and life cycle assessments. An EPD is a widely-accepted, verified report of the ways in which a product affects the environment throughout its life cycle. It provides information such as GWP, air emissions, ozone depletion, and water pollution. EPDs allow purchasers to have comparable, objective, and third-party verified data to better understand a product’s environmental impacts so they can make more informed product selections.
Life cycle analyses attempt to quantify the environmental impacts associated with a given product. The analyses can vary depending on the assumptions made and the extent of the life cycle considered. For life cycle analyses of building materials, assessments are usually either cradle-to-gate or cradle-to-grave. Cradle-to-gate analyses consider the emissions associated from extraction up until arrival at the project site, while cradle-to-grave continue further to consider any emissions associated with the product’s use within the project and building and, ultimately, its end of life.
- Building decarbonization framework. AB 2446 (Holden), Chapter 352, Statutes of 2022, requires ARB to develop a framework for measuring and reducing GHG emissions associated with new building construction. This bill requires the framework to include a comprehensive strategy to achieve a 40% net reduction in the carbon intensity of construction and materials used in new construction as soon as possible, but no later than December 31, 2035, and an interim target to achieve a 20% net reduction in carbon intensity by the end of 2030. AB 2446 requires ARB to evaluate the cost impact and feasibility of implementation of the strategy for the purpose of developing recommendations to address known cost impacts and feasibility issues and limits or excludes the incorporation of lower carbon materials to the extent that their use has a cost impact or is infeasible. The bill established parameters for feasibility, including consideration of material performance and availability, and cost impacts, which is defined as any cost increase of 5% or more.
- Embodied carbon trading system. AB 43 (Holden), Chapter 316, Statutes of 2023, requires ARB to develop a market-based embodied carbon trading system to facilitate compliance with the state’s strategy to reduce the carbon intensity of building materials by 40% by 2035.
- Implementation. ARB held its first workshop to begin implementing AB 2446 and AB 43 in September of 2024, and held additional workshops in March, September, and October of 2025. The meetings have covered information on building material reporting, project reporting, establishing methodologies to estimate a baseline, and provided an opportunity for stakeholder input and public comments.
As part of its implementation work, ARB has contracted with the UC Berkeley College of Environmental Design and the Center for the Built Environment to assess the GHG emission reduction potential and associated costs of material efficiency, reuse, and substitution strategies that can be incorporated into future decarbonization policy for the built environment. The project began in June of 2025, and is scheduled to be completed mid-2027. - Housing affordability. California’s home prices are generally higher than the rest of the country. According to the Legislative Analyst’s Office, mid-tier homes in the state “are about $755,000—more than twice as expensive as the typical mid-tier US home.” Income levels have not kept pace with the rising costs of housing, making it more difficult for Californians to afford a home. As noted above, the state’s embodied carbon framework and trading system include standards for cost impacts and feasibility; however, a 5% cost increase is significant given the state’s already high housing costs.
- This bill. This bill is intended to improve housing affordability by pausing the implementation of AB 2446 and AB 43 until ARB makes a determination that lower carbon intensity construction materials achieve cost parity with conventional building materials.
- Author’s statement:
AB 1704 balances housing affordability while maintaining the sustainability standards of California. With the ongoing housing crisis, California must act strategically when implementing policies that could increase housing costs. My district has a 23% poverty rate, and nearly 90% of the residents are renters. Most are already rent burdened, paying more than 30% of their income for rent. AB 1704 will help us avoid any unintended consequences of enforcing embodied carbon standards on our most vulnerable communities. California can’t just say ‘affordability,’ we have to execute it on every front.
- Suggested amendments. In order to ensure that the Legislature has an opportunity to review these programs to ensure that they aren’t paused indefinitely, the committee may wish to amend the bill to limit the length of the delay to a maximum of 10 years.
REGISTERED SUPPORT / OPPOSITION:
Support
American Chemistry Council
American Wood Council
Asphalt Roofing Manufacturers Association
Associated General Contractors, California Chapters
California Building Industry Association
California Construction & Industrial Materials Association
California Legislative Conference of Plumbing, Heating & Piping Industry
California Manufacturers and Technology Association
California YIMBY
Gypsum Association
Housing Action Coalition
National Electrical Contractors Association (NECA)
North American Insulation Manufacturers Association (UNREG)
Northern California Allied Trades
Polyisocyanurate Insulation Manufacturers Association, the (PIMA)
Resilient Floor Covering Institute (RFCI)
Southern California Glass Management Association (SCGMA)
Spray Foam Coalition
United Contractors (UCON)
Wall and Ceiling Alliance
Western Painting and Coating Contractors Association
Opposition
American Council for an Energy-efficient Economy
Building Transparency
Ecological Building Network
Industrious Labs
Natural Resources Defense Council (NRDC)
Project 2030
Public Citizen
Sierra Club California
U.S. Green Building Council, California
Analysis Prepared by: Elizabeth MacMillan / NAT. RES. /
Discussed in Hearing
Senate Standing Committee on Environmental Quality
Assembly Floor
Assembly Standing Committee on Appropriations
Assembly Standing Committee on Natural Resources
Bill Author
Bill Co-Author(s):