AB 1915: Accelerated restaurant equipment permitting approval: retail food safety.
- Session Year: 2025-2026
- House: Assembly
- Latest Version Date: 2026-07-01
Current Status:
In Progress
(2026-08-13: In committee: Held under submission.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
(1)Existing law authorizes the legislative body of any county or city to adopt ordinances that regulate the use of buildings, structures, and land as between industry, business, residences, and open space, including agriculture, recreation, enjoyment of scenic beauty, use of natural resources, and other purposes. Existing law establishes a streamlined approval process for a local permit for a tenant improvement relating to a restaurant, as those terms are defined.
This bill would establish a streamlined approval process for a local permit for a like-for-like equipment installation relating to a restaurant, as those terms are defined. In this regard, the bill would require a local building department, upon the request and at the expense of the permit applicant, to allow a qualified licensed contractor certifier, defined as a licensed contractor that meets certain requirements, to submit a certification of the installations compliance with applicable codes. The bill would require a qualified licensed contractor certifier to prepare certain affidavits related to the equipment installation under penalty of perjury. The bill would require the local building department to approve or deny the permit application within 10 business days of receipt and would deem the plan approved for permitting purposes if the local building department does not approve or deny the application within that timeframe, provided that all required fees have been paid. The bill would make qualified licensed contractor certifiers liable for damages arising from negligent or false certification. The bill would also require the applicant to indemnify the local agency from any property damage or personal injury arising from construction performed under the above-described provisions.
(2)Existing law, the California Environmental Quality Act (CEQA), requires a lead agency, as defined, to prepare, or cause to be prepared, and certify the completion of, an environmental impact report on a project that it proposes to carry out or approve that may have a significant effect on the environment or to adopt a negative declaration if it finds that the project will not have that effect. CEQA does not apply to the approval of ministerial projects.
To the extent that the streamlined, ministerial review processes established by the bill would apply to final, discretionary approval of a like-for-like equipment installation, the bill would exempt those projects from CEQA.
(3)Existing law, the Contractors State License Law, provides for the licensure and regulation of contractors by the Contractors State License Board. Under existing law, willful or deliberate disregard by a licensed contractor of various state building, labor, and safety laws constitutes a cause for disciplinary action by the board. Existing law provides for related disciplinary proceedings and requires the board to promulgate regulations covering the assessment of civil penalties under those disciplinary provisions, as prescribed. Existing law, beginning on July 1, 2026, requires a civil penalty to be assessed of not less than $1,500 and not to exceed $30,000 for certain violations of the Contractors State License Law, as provided.
This bill would make a false statement made in a certification submitted pursuant to the above-described provisions grounds for disciplinary action by the Contractors State License Board and grounds for a conviction of perjury. The bill would also require that false statement to be assessed as a civil penalty in accordance with the amounts described above.
(4)Existing law, the California Building Standards Law, establishes the California Building Standards Commission within the Department of General Services. Existing law requires the commission to approve and adopt building standards and to codify those standards in the California Building Standards Code. Existing law authorizes local governments to enact ordinances or regulations that make building standards amendments to the California Building Standards Code, as specified.
This bill would require the commission, as a part of the next triennial update of the California Building Standards Code that occurs on or after January 1, 2027, to adopt building standards authorizing a business establishment to take various actions, including authorizing a business establishment that is takeout only to operate without providing customer restrooms.
(5)Existing law, the California Retail Food Code, establishes uniform health and sanitation standards for retail food facilities. Under existing law, local health agencies are primarily responsible for enforcing these standards. A person who violates any provision of the California Retail Food Code is guilty of a misdemeanor, except as otherwise provided.
This bill would make various changes to the standards for handwashing facilities, refrigeration units, grease traps, and passthrough window service openings. The bill would require raw animal foods that are cooked using noncontinuous cooking, as defined, to be subject to an initial heating process that is no longer than 60 minutes and cooled in a specified manner, among other things. The bill would revise the definition of limited food preparation to no longer include the handling of milk or milk products. The bill would change the temperature range for the definition of warm water from at least 100oF to at least 85oF but not greater than 108oF.
(6)Existing law requires a food facilitys walls and ceilings to be durable, smooth, nonabsorbent, and easily cleanable. Existing law exempts from this requirement walls and ceilings of bar areas in which alcoholic beverages are sold or served directly to the consumers, except wall areas adjacent to bar sinks and areas where food is prepared, among other things. Existing law also exempts from this requirement restrooms that are used exclusively by the consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
This bill would instead exempt walls and ceilings of bar areas in which any beverage is sold, served, or dispensed directly to the consumers. The bill would also exempt restrooms that are used exclusively by employees.
(7)Existing law requires temporary food facilities to be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Existing law requires overhead protection to be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants. Existing law exempts from these requirements a temporary food facility that is approved for limited food preparation if flying insects, vermin, birds, and other pests are absent due to the location of the facility or other limiting conditions.
This bill would additionally exempt a temporary food facility that is approved for limited food preparation from these requirements if environmental factors that could contaminate the food are absent due to the location of the facility or other limiting conditions.
(8)By revising the standards that are required to be enforced by local health agencies, by increasing the duties of local building officials, and by expanding the scope of existing crimes, the bill would impose a state-mandated local program.
(9)The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
(10)The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that with regard to certain mandates no reimbursement is required by this act for a specified reason.
With regard to any other mandates, this bill would provide that, if the Commission on State Mandates determines that the bill contains costs so mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
(1)Existing law authorizes the legislative body of any county or city to adopt ordinances that regulate the use of buildings, structures, and land as between industry, business, residences, and open space, including agriculture, recreation, enjoyment of scenic beauty, use of natural resources, and other purposes. Existing law establishes a streamlined approval process for a local permit for a tenant improvement relating to a restaurant, as those terms are defined.
This bill would establish a streamlined approval process for a local permit for a like-for-like equipment installation relating to a restaurant, as those terms are defined. In this regard, the bill would require a local building department, upon the request and at the expense of the permit applicant, to allow a qualified licensed contractor certifier, defined as a licensed commercial contractor that meets certain requirements, to submit a certification of the installations compliance with applicable codes. The bill would require a qualified licensed contractor certifier to prepare certain affidavits related to the equipment installation under penalty of perjury. The bill would require the local building department to approve or deny the permit application within 10 business days of receipt and would deem the plan approved for permitting purposes if the local building department does not approve or deny the application within that timeframe, provided that all required fees have been paid. The bill would make qualified licensed contractor certifiers liable for damages arising from negligent or false certification. The bill would also require the applicant to indemnify the local agency from any property damage or personal injury arising from construction performed under the above-described provisions.
(2)Existing law, the California Environmental Quality Act (CEQA), requires a lead agency, as defined, to prepare, or cause to be prepared, and certify the completion of, an environmental impact report on a project that it proposes to carry out or approve that may have a significant effect on the environment or to adopt a negative declaration if it finds that the project will not have that effect. CEQA does not apply to the approval of ministerial projects.
To the extent that the streamlined, ministerial review processes established by the bill would apply to final, discretionary approval of a like-for-like equipment installation, the bill would exempt those projects from CEQA.
(3)Existing law law, the Contractors State License Law, provides for the licensure and regulation of contractors by the Contractors State License Board. Under existing law, willful or deliberate disregard by a licensed contractor of various state building, labor, and safety laws constitutes a cause for disciplinary action by the board. Existing law provides for related disciplinary proceedings and requires the board to promulgate regulations covering the assessment of civil penalties under those disciplinary provisions, as prescribed. Existing law, beginning on July 1, 2026, requires a civil penalty to be assessed of not less than $1,500 and not to exceed $30,000 for certain violations of the Contractors State License Law, as provided.
This bill would make a false statement made in a certification submitted pursuant to the above-described provisions grounds for disciplinary action by the Contractors State License Board and grounds for a conviction of perjury. The bill would also require that false statement to be assessed as a civil penalty in accordance with the amounts described above.
(4)Existing law, the California Building Standards Law, establishes the California Building Standards Commission within the Department of General Services. Existing law requires the commission to approve and adopt building standards and to codify those standards in the California Building Standards Code. Existing law authorizes local governments to enact ordinances or regulations that make building standards amendments to the California Building Standards Code, as specified.
This bill would require the commission, as a part of the next triennial update of the California Building Standards Code that occurs on or after January 1, 2027, to adopt building standards authorizing a business establishment to take various actions, including authorizing a business establishment that is takeout only to operate without providing customer restrooms.
(5)Existing law, the California Retail Food Code, establishes uniform health and sanitation standards for retail food facilities. Under existing law, local health agencies are primarily responsible for enforcing these standards. A person who violates any provision of the California Retail Food Code is guilty of a misdemeanor, except as otherwise provided.
This bill would make various changes to the standards for handwashing facilities, refrigeration units, grease traps, and passthrough window service openings. The bill would require raw animal foods that are cooked using noncontinuous cooking, as defined, to be subject to an initial heating process that is no longer than 60 minutes and cooled in a specified manner, among other things. The bill would revise the definition of limited food preparation to no longer include the handling of milk or milk products. The bill would change the temperature range for the definition of warm water from at least 100oF to at least 85oF but not greater than 108oF.
(6)Existing law requires a food facilitys walls and ceilings to be durable, smooth, nonabsorbent, and easily cleanable. Existing law exempts from this requirement walls and ceilings of bar areas in which alcoholic beverages are sold or served directly to the consumers, except wall areas adjacent to bar sinks and areas where food is prepared, among other things. Existing law also exempts from this requirement restrooms that are used exclusively by the consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
This bill would instead exempt walls and ceilings of bar areas in which any beverage is sold, served, or dispensed directly to the consumers. The bill would also exempt restrooms that are used exclusively by employees.
(7)Existing law requires temporary food facilities to be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Existing law requires overhead protection to be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants. Existing law exempts from these requirements a temporary food facility that is approved for limited food preparation if flying insects, vermin, birds, and other pests are absent due to the location of the facility or other limiting conditions.
This bill would additionally exempt a temporary food facility that is approved for limited food preparation from these requirements if environmental factors that could contaminate the food are absent due to the location of the facility or other limiting conditions.
(8)By revising the standards that are required to be enforced by local health agencies, by increasing the duties of local building officials, and by expanding the scope of existing crimes, the bill would impose a state-mandated local program.
(9)The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
(10)The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that with regard to certain mandates no reimbursement is required by this act for a specified reason.
With regard to any other mandates, this bill would provide that, if the Commission on State Mandates determines that the bill contains costs so mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
(1)Existing law authorizes the legislative body of any county or city to adopt ordinances that regulate the use of buildings, structures, and land as between industry, business, residences, and open space, including agriculture, recreation, enjoyment of scenic beauty, use of natural resources, and other purposes. Existing law establishes a streamlined approval process for a local permit for a tenant improvement relating to a restaurant, as those terms are defined.
This bill would establish a streamlined approval process for a local permit for a like-for-like equipment installation relating to a restaurant, as those terms are defined. In this regard, the bill would require a local building department, upon the request and at the expense of the permit applicant, to allow a qualified licensed contractor certifier, defined as a licensed commercial contractor that meets certain requirements, to submit a certification of the installations compliance with applicable codes. The bill would require a qualified licensed contractor certifier to prepare certain affidavits related to the equipment installation under penalty of perjury. The bill would require the local building department to approve or deny the permit application within 10 business days of receipt and would deem the plan approved for permitting purposes if the local building department does not approve or deny the application within that timeframe, provided that all required fees have been paid. The bill would make qualified licensed contractor certifiers liable for damages arising from negligent or false certification. The bill would also require the applicant to indemnify the local agency from any property damage or personal injury arising from construction performed under the above-described provisions.
(2)Existing law, the California Environmental Quality Act (CEQA), requires a lead agency, as defined, to prepare, or cause to be prepared, and certify the completion of, an environmental impact report on a project that it proposes to carry out or approve that may have a significant effect on the environment or to adopt a negative declaration if it finds that the project will not have that effect. CEQA does not apply to the approval of ministerial projects.
To the extent that the streamlined, ministerial review processes established by the bill would apply to final, discretionary approval of a like-for-like equipment installation, the bill would exempt those projects from CEQA.
(3)Existing law provides for the licensure and regulation of contractors by the Contractors State License Board. Under existing law, willful or deliberate disregard by a licensed contractor of various state building, labor, and safety laws constitutes a cause for disciplinary action by the board.
This bill would make a false statement made in a certification submitted pursuant to the above-described provisions grounds for disciplinary action by the Contractors State License Board and grounds for a conviction of perjury.
(4)Existing law, the California Building Standards Law, establishes the California Building Standards Commission within the Department of General Services. Existing law requires the commission to approve and adopt building standards and to codify those standards in the California Building Standards Code. Existing law authorizes local governments to enact ordinances or regulations that make building standards amendments to the California Building Standards Code, as specified.
This bill would require the commission, as a part of the next triennial update of the California Building Standards Code that occurs on or after January 1, 2027, to adopt building standards authorizing a business establishment to take various actions, including authorizing a business establishment that is takeout only to operate without providing customer restrooms.
(5)Existing law, the California Retail Food Code, establishes uniform health and sanitation standards for retail food facilities. Under existing law, local health agencies are primarily responsible for enforcing these standards. A person who violates any provision of the California Retail Food Code is guilty of a misdemeanor, except as otherwise provided.
This bill would make various changes to the standards for handwashing facilities, refrigeration units, grease traps, and passthrough window service openings. The bill would require raw animal foods that are cooked using noncontinuous cooking, as defined, to be subject to an initial heating process that is no longer than 60 minutes and cooled in a specified manner, among other things. The bill would revise the definition of limited food preparation to no longer include the handling of milk or milk products. The bill would change the temperature range for the definition of warm water from at least 100oF to at least 85oF but not greater than 108oF.
(6)Existing law requires a food facilitys walls and ceilings to be durable, smooth, nonabsorbent, and easily cleanable. Existing law exempts from this requirement walls and ceilings of bar areas in which alcoholic beverages are sold or served directly to the consumers, except wall areas adjacent to bar sinks and areas where food is prepared, among other things. Existing law also exempts from this requirement restrooms that are used exclusively by the consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
This bill would instead exempt walls and ceilings of bar areas in which any beverage is sold, served, or dispensed directly to the consumers. The bill would also exempt restrooms that are used exclusively by employees.
(7)Existing law requires temporary food facilities to be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Existing law requires overhead protection to be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants. Existing law exempts from these requirements a temporary food facility that is approved for limited food preparation if flying insects, vermin, birds, and other pests are absent due to the location of the facility or other limiting conditions.
This bill would additionally exempt a temporary food facility that is approved for limited food preparation from these requirements if environmental factors that could contaminate the food are absent due to the location of the facility or other limiting conditions.
(8)By revising the standards that are required to be enforced by local health agencies, by increasing the duties of local building officials, and by expanding the scope of existing crimes, the bill would impose a state-mandated local program.
(9)The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
(10)The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that with regard to certain mandates no reimbursement is required by this act for a specified reason.
With regard to any other mandates, this bill would provide that, if the Commission on State Mandates determines that the bill contains costs so mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
Existing law, the California Retail Food Code, establishes uniform health and sanitation standards for, and provides for regulation by the State Department of Public Health of, retail food facilities, and requires local health agencies to enforce those provisions.This bill would declare the intent of the Legislature to enact subsequent legislation to support Californias neighborhood restaurants.Existing law, the California Retail Food Code, establishes uniform health and sanitation standards for, and provides for regulation by the State Department of Public Health of, retail food facilities, and requires local health agencies to enforce those provisions.
This bill would declare the intent of the Legislature to enact subsequent legislation to support Californias neighborhood restaurants.
(a)The board shall promulgate regulations covering the assessment of civil penalties under this article that give due consideration to the appropriateness of the penalty with respect to the following factors:
(1)The gravity of the violation.
(2)The good faith of the licensee or applicant for licensure being charged.
(3)The history of previous violations.
(b)(1)Notwithstanding Section 125.9, and except as otherwise provided by this chapter, a civil penalty shall be assessed in an amount not less than five hundred dollars ($500) nor greater than eight thousand dollars ($8,000). Notwithstanding Section 125.9, a civil penalty shall be assessed in an amount not less than one thousand five hundred dollars ($1,500) nor greater than thirty thousand dollars ($30,000) for a violation of Section 7110, 7110.2, 7114, or 7118.
(2)The board may adjust all minimum civil penalties imposed by this section for inflation every five years. The adjustment shall be equivalent to the percentage, if any, that the Consumer Price Index, as determined pursuant to Section 2212 of the Revenue and Taxation Code, exceeds the Consumer Price Index at the time this subdivision goes into effect. Any increase determined under this paragraph shall be rounded as follows:
(A)In multiples of one hundred dollars ($100) for penalties greater than one hundred dollars ($100) but less than or equal to one thousand dollars ($1,000).
(B)In multiples of one thousand dollars ($1,000) for penalties greater than one thousand dollars ($1,000).
(c)This section shall become operative on July 1, 2026.
SEC. 2.Section 7110.2 is added to the Business and Professions Code, to read:7110.2.A false statement made in a certification submitted pursuant to Chapter 16 (commencing with Section 66360) of Division 1 of Title 7 of the Government Code constitutes grounds for disciplinary action by the Contractors State License Board.
SEC. 3.Chapter 16 (commencing with Section 66360) is added to Division 1 of Title 7 of the Government Code, to read:16.Accelerated Restaurant Equipment Installation Approval66360.For purposes of this chapter, all the following definitions apply:
(a)Licensed contractor means a contractor, as defined in Section 7026 of the Business and Professions Code, licensed pursuant to Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, holding a valid and active license in good standing in the appropriate classification for the work performed.
(b)Like-for-like equipment installation means the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
(1)Change the use or occupancy classification of the building.
(2)Alter structural or load-bearing elements.
(3)Modify fire or life safety systems, except for direct connection to existing approved systems.
(4)Increase approved utility capacity.
(5)Require discretionary review.
(c)Qualified licensed contractor certifier means a licensed contractor who satisfies all the following:
(1)Does not contract for or perform initial installation of like-for-like equipment they are certifying.
(2)Is unaffiliated with the contractor performing the like-for-like equipment installation.
(1)(3)Holds a valid license in good standing in the appropriate classification for the work performed.
(2)(4)Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
(3)(5)Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
(4)(6)Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
(d)Restaurant means a retail food establishment that prepares, serves, and vends food directly to the consumer.
66360.1.(a)(1)Upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant, a local building department shall allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
(2)A certification submitted pursuant to this chapter shall satisfy the inspection requirement for the qualifying installation.
(3)Certification pursuant to this chapter shall be at the applicants expense and shall not exempt the project from permit requirements.
(b)A qualified licensed contractor certifier shall submit an affidavit, under penalty of perjury, attesting to both of the following:
(1)The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
(2)The work performed is limited to a like-for-like equipment installation.
(c)(1)The local building department shall approve or deny a complete permit application within 10 business days of receipt.
(2)If the local building department does not approve or deny the application within the timeframe specified in paragraph (1), the permit shall be deemed approved for permitting purposes, provided all required fees have been paid.
66360.2.(a)A qualified licensed contractor certifier shall be liable for damages arising from negligent or false certification under this chapter.
(b)The applicant shall indemnify the local agency from property damage or personal injury arising from construction performed pursuant to this chapter.
(c)A false statement made in a certification submitted pursuant to this chapter shall constitute grounds for disciplinary action by the Contractors State License Board, pursuant to Section 7710.2 of the Business and Professions Code, and may constitute grounds for a conviction of perjury.
66360.3.A city, county, or city and county shall adopt reasonable administrative requirements to implement this chapter.
SEC. 4.Section 18941.18 is added to the Health and Safety Code, to read:18941.18.(a)For the purposes of this section, alcohol has the same meaning as defined in Section 23003 of the Business and Professions Code.
(b)As a part of the next triennial update of the California Building Standards Code (Title 24 of the California Code of Regulations) that occurs on or after January 1, 2027, the commission shall adopt building standards that do all the following:
(1)Authorizes a business establishment that is takeout only to operate without providing customer restrooms.
(2)Authorizes a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
(3)Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
(4)Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
(5)Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
(6)Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood, as described in Section 508.0 of the California Mechanical Code (Part 4 of Title 24 of the California Code of Regulations) over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor.
(7)Authorizes a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
SEC. 5.Section 113818 of the Health and Safety Code is amended to read:113818.(a)Limited food preparation means food preparation that is restricted to one or more of the following:
(1)Heating, frying, baking, roasting, popping, shaving of ice, blending, steaming or boiling of hot dogs, or assembly of nonprepackaged food.
(2)Dispensing and portioning of nonpotentially hazardous food or dispensing and portioning for immediate service to a customer of food that has been temperature controlled until immediately prior to portioning or dispensing.
(3)Holding, portioning, and dispensing of any foods that are prepared for satellite food service by the onsite permanent food facility or prepackaged by another approved source.
(4)Holding, portioning, and dispensing of any foods that are prepared by a catering operation.
(5)Slicing and chopping of nonpotentially hazardous food or produce that has been washed at an approved facility or slicing and chopping of food on a heated cooking surface during the cooking process.
(6)Cooking and seasoning to order.
(7)Juicing or preparing beverages that are for immediate service, in response to an individual consumer order, that do not contain frozen milk products.
(8)Hot and cold holding of food that has been prepared at an approved permanent food facility.
(9)Reheating of food that has been previously prepared at an approved permanent food facility and held at temperatures required by this chapter.
(b)Limited food preparation does not include any of the following:
(1)Slicing and chopping potentially hazardous food, other than produce, unless it is on the heated cooking surface.
(2)Thawing.
(3)Cooling of cooked, potentially hazardous food.
(4)Grinding raw ingredients or potentially hazardous food.
(5)Washing of foods.
(6)Cooking of potentially hazardous foods for later use.
(7)Manufacturing, freezing, processing, or packaging of milk, milk products, or products resembling milk products subject to licensing under Division 15 (commencing with Section 32501) of the Food and Agricultural Code.
SEC. 6.Section 113838 is added to the Health and Safety Code, to read:113838.(a)Noncontinuous cooking, also known as par-cooking, means the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service.
(b)Noncontinuous cooking does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
SEC. 7.Section 113941 of the Health and Safety Code is amended to read:113941.Warm water means water that is supplied through a mixing valve or combination faucet at a temperature of at least 85oF but not greater than 108oF.
SEC. 8.Section 113953 of the Health and Safety Code is amended to read:113953.(a)Handwashing facilities shall be provided within or adjacent to toilet rooms. The number of handwashing facilities required shall be in accordance with local building and plumbing codes.
(b)(1)Except as otherwise provided in Section 114358, food facilities constructed or extensively remodeled after January 1, 1996, that handle nonprepackaged food, shall provide facilities exclusively for handwashing in food preparation areas and in warewashing areas that are not located within or immediately adjacent to food preparation areas. Handwashing facilities shall be sufficient in number and conveniently located so as to be accessible at all times for use by food employees.
(2)The handwashing facility shall be separated from the warewashing sink by a metal splashguard with a height of at least six inches, that extends from the back edge of the drainboard to the front edge of the drainboard, the corners of the barrier to be rounded. No splashguard is required if the distance between the handwashing sink and the warewashing sink drainboards is 24 inches or more.
(c)(1)Handwashing facilities shall be equipped to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet.
(2)A steam mixing valve shall not be used at a handwashing sink.
(3)A self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet.
(d)An automatic handwashing facility may be installed and used in accordance with the manufacturers instructions.
(e)Notwithstanding subdivision (b), the enforcement agency may allow handwashing facilities other than those required by this section when it deems that the alternate facilities are adequate.
SEC. 9.Section 114009 is added to the Health and Safety Code, to read:114009.Raw animal foods that are cooked using a noncontinuous cooking process shall be all of the following:
(a)Subject to an initial heating process that is no longer than 60 minutes in duration.
(b)Immediately after initial heating, cooled according to the time and temperature parameters specified under Section 114002 for cooked potentially hazardous foods.
(c)After cooling, held frozen or cold, as specified for potentially hazardous foods under subdivision (d) of Section 113996.
(d)Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under Section 114004.
(e)Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods under Section 114002 if not either hot held, as specified under subdivision (a) of Section 113996, served immediately, or held using time as a public health control, as specified under Section 114000, after complete cooking.
(f)Prepared and stored according to written procedures that meet all of the following conditions:
(1)Are maintained in the food facility and are available to the enforcement agency upon request.
(2)Describe how the requirements specified under subdivisions (a) to (e), inclusive, are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met.
(3)Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be cooked as specified under subdivision (d) prior to being offered for sale or service.
(4)Describe how the foods, after initial heating but prior to cooking as specified under subdivision (d), are to be separated from ready-to-eat foods.
SEC. 10.Section 114157 of the Health and Safety Code is amended to read:114157.(a)A temperature measuring device shall be provided for each refrigeration unit.
(b)The temperature measuring device shall be located to indicate the air temperature in the warmest part of the unit and, except for vending machines, the temperature reading shall be readily visible.
(c)Except as specified in subdivision (d), cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the devices temperature display. Alternative hot or cold holding equipment can be equipped with approved product mimicking sensors placed in devices located in the warmest part of the mechanically refrigerated unit in lieu of an ambient air sensor.
(d)Subdivision (c) shall not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bain-maries, steam tables, insulated food transport containers, and salad bars.
(e)Temperature measuring devices shall be easily readable and have a numerical scale, printed record, or digital readout in increments no greater than 2F or over the intended range of use.
SEC. 11.Section 114201 of the Health and Safety Code is amended to read:114201.(a)If provided, a grease trap or grease interceptor shall not be located in a food preparation or utensil handling area unless specifically approved by the enforcement agency.
(b)Grease traps and grease interceptors shall be easily accessible for servicing.
(c)Notwithstanding subdivision (a), this section shall not apply to either of the following:
(1)An aboveground grease trap installed under a three-compartment sink under the following conditions:
(A)A structural hardship can be determined preventing the grease trap from being installed in an area not designated for food preparation or storage or a utensil handling area.
(B)The site can provide a cleaning or maintenance plan that indicates how and when this grease trap will be accessed for service to prevent any cross contamination of food or food contact surfaces.
(C)The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
(2)Any food facility approved with a grease trap or grease interceptor that is in operation before the effective date of this part.
SEC. 12.Section 114259.2 of the Health and Safety Code is amended to read:114259.2.(a)Passthrough window service openings that are limited to no more than 216 square inches shall not be closer together than 18 inches and shall be provided with a solid or screened window that is closed when not in use. Screening shall be at least 16 mesh per square inch. The counter surface of the service openings shall be smooth and easily cleanable.
(b)A passthrough window service opening of up to 432 square inches is approved if equipped with an air curtain device or equipped with a self-closing device. The counter surface of the service opening shall be smooth and easily cleanable.
(c)At a drive-through, a passthrough window service opening that is larger than 432 square inches is approved if equipped with both a self-closing device and an air curtain device. The counter surface of the service opening shall be smooth and easily cleanable.
SEC. 13.Section 114271 of the Health and Safety Code is amended to read:114271.(a)Except as provided in subdivision (b), the walls and ceilings of all rooms shall be of a durable, smooth, nonabsorbent, and easily cleanable surface.
(b)This section shall not apply to any of the following areas:
(1)Walls and ceilings of bar areas in which beverages are sold, served, or dispensed directly to the consumers, except wall areas adjacent to bar sinks and areas where foods, including beverages, are prepared.
(2)Areas where food is stored only in unopened bottles, cans, cartons, sacks, or other original shipping containers.
(3)Dining and sales areas.
(4)Offices.
(5)Restrooms that are used exclusively by the employees or consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
(6)Dressing rooms, dressing areas, or locker areas.
(c)Acoustical paneling may be utilized if it is installed not less than six feet above the floor. The paneling shall meet the other requirements of this section.
(d)Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning.
(e)Attachments to walls and ceilings, such as light fixtures, mechanical room ventilation system components, vent covers, wall mounted fans, decorative items, and other attachments, shall be easily cleanable.
SEC. 14.Section 114349 of the Health and Safety Code is amended to read:114349.(a)Temporary food facilities shall be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Overhead protection shall be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants.
(b)Temporary food facilities that handle nonprepackaged food shall also protect food from contamination in one of the following ways:
(1)Enclosure of the food facility with 16 mesh per square inch screens.
(2)Limiting display and handling of nonprepackaged food in food compartments.
(3)Other alternative, effective means approved by the enforcement officer.
(c)Notwithstanding Section 113984, this section does not apply to temporary food facilities that are approved for limited food preparation if flying insects, vermin, birds, other pests, and environmental factors, including, but not limited to, precipitation and wind that could contaminate the food, are absent due to the location of the facility or other limiting conditions.
SEC. 15.The Legislature finds and declares that establishing a narrowly tailored, statewide framework for low-risk, like-for-like restaurant equipment installations, which furthers uniform standards for restaurant permitting, contractor licensing, and public safety responsibilities that are already governed by state law, is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 16 (commencing with Section 66360) to Division 1 of Title 7 of the Government Code applies to all cities, including charter cities.
SEC. 16.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because a local agency or school district has the authority to levy service charges, fees, or assessments sufficient to pay for the program or level of service mandated by this act or because costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
However, if the Commission on State Mandates determines that this act contains other costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
(a)The board shall promulgate regulations covering the assessment of civil penalties under this article that give due consideration to the appropriateness of the penalty with respect to the following factors:
(1)The gravity of the violation.
(2)The good faith of the licensee or applicant for licensure being charged.
(3)The history of previous violations.
(b)(1)Notwithstanding Section 125.9, and except as otherwise provided by this chapter, a civil penalty shall be assessed in an amount not less than five hundred dollars ($500) nor greater than eight thousand dollars ($8,000). Notwithstanding Section 125.9, a civil penalty shall be assessed in an amount not less than one thousand five hundred dollars ($1,500) nor greater than thirty thousand dollars ($30,000) for a violation of Section 7110, 7110.2, 7114, or 7118.
(2)The board may adjust all minimum civil penalties imposed by this section for inflation every five years. The adjustment shall be equivalent to the percentage, if any, that the Consumer Price Index, as determined pursuant to Section 2212 of the Revenue and Taxation Code, exceeds the Consumer Price Index at the time this subdivision goes into effect. Any increase determined under this paragraph shall be rounded as follows:
(A)In multiples of one hundred dollars ($100) for penalties greater than one hundred dollars ($100) but less than or equal to one thousand dollars ($1,000).
(B)In multiples of one thousand dollars ($1,000) for penalties greater than one thousand dollars ($1,000).
(c)This section shall become operative on July 1, 2026.
SECTION 1.SEC. 2.Section 7110.2 is added to the Business and Professions Code, to read:7110.2.A false statement made in a certification submitted pursuant to Chapter 16 (commencing with Section 66360) of Division 1 of Title 7 of the Government Code constitutes grounds for disciplinary action by the Contractors State License Board.
SEC. 2.SEC. 3.Chapter 16 (commencing with Section 66360) is added to Division 1 of Title 7 of the Government Code, to read:16.Accelerated Restaurant Equipment Installation Approval66360.For purposes of this chapter, all the following definitions apply:
(a)Licensed commercial contractor means a contractor, as defined in Section 7026 of the Business and Professions Code, licensed pursuant to Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, holding a valid and active license in good standing in the appropriate classification for the work performed.
(b)Like-for-like equipment installation means the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
(1)Change the use or occupancy classification of the building.
(2)Alter structural or load-bearing elements.
(3)Modify fire or life safety systems, except for direct connection to existing approved systems.
(4)Increase approved utility capacity.
(5)Require discretionary review.
(c)Qualified licensed contractor certifier means a licensed commercial contractor who satisfies all the following:
(1)Holds a valid license in good standing in the appropriate classification for the work performed.
(2)Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
(3)Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
(4)Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
(d)Restaurant has the same meaning as defined in subdivision (b) of Section 66345.1 of the Government Code. means a retail food establishment that prepares, serves, and vends food directly to the consumer.
66360.1.(a)(1)Upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant, a local building department shall allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
(2)A certification submitted pursuant to this chapter shall satisfy the inspection requirement for the qualifying installation.
(3)Certification pursuant to this chapter shall be at the applicants expense and shall not exempt the project from permit requirements.
(b)A qualified licensed contractor certifier shall submit an affidavit, under penalty of perjury, attesting to both of the following:
(1)The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
(2)The work performed is limited to a like-for-like equipment installation.
(c)(1)The local building department shall approve or deny a complete permit application within 10 business days of receipt.
(2)If the local building department does not approve or deny the application within the timeframe specified in paragraph (1), the permit shall be deemed approved for permitting purposes, provided all required fees have been paid.
66360.2.(a)A qualified licensed contractor certifier shall be liable for damages arising from negligent or false certification under this chapter.
(b)The applicant shall indemnify the local agency from property damage or personal injury arising from construction performed pursuant to this chapter.
(c)A false statement made in a certification submitted pursuant to this chapter shall constitute grounds for disciplinary action by the Contractors State License Board, pursuant to Section 7710.2 of the Business and Professions Code, and may constitute grounds for a conviction of perjury.
66360.3.A city, county, or city and county shall adopt reasonable administrative requirements to implement this chapter.
SEC. 3.SEC. 4.Section 18941.18 is added to the Health and Safety Code, to read:18941.18.(a)For the purposes of this section, alcohol has the same meaning as defined in Section 23003 of the Business and Professions Code.
(b)As a part of the next triennial update of the California Building Standards Code (Title 24 of the California Code of Regulations) that occurs on or after January 1, 2027, the commission shall adopt building standards that do all the following:
(1)Authorizes a business establishment that is takeout only to operate without providing customer restrooms.
(2)Authorizes a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
(3)Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
(4)Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
(5)Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
(6)Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood, as described in Section 508.0 of the California Mechanical Code (Part 4 of Title 24 of the California Code of Regulations) over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor.
(7)Authorizes a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
SEC. 4.SEC. 5.Section 113818 of the Health and Safety Code is amended to read:113818.(a)Limited food preparation means food preparation that is restricted to one or more of the following:
(1)Heating, frying, baking, roasting, popping, shaving of ice, blending, steaming or boiling of hot dogs, or assembly of nonprepackaged food.
(2)Dispensing and portioning of nonpotentially hazardous food or dispensing and portioning for immediate service to a customer of food that has been temperature controlled until immediately prior to portioning or dispensing.
(3)Holding, portioning, and dispensing of any foods that are prepared for satellite food service by the onsite permanent food facility or prepackaged by another approved source.
(4)Holding, portioning, and dispensing of any foods that are prepared by a catering operation.
(5)Slicing and chopping of nonpotentially hazardous food or produce that has been washed at an approved facility or slicing and chopping of food on a heated cooking surface during the cooking process.
(6)Cooking and seasoning to order.
(7)Juicing or preparing beverages that are for immediate service, in response to an individual consumer order, that do not contain frozen milk products.
(8)Hot and cold holding of food that has been prepared at an approved permanent food facility.
(9)Reheating of food that has been previously prepared at an approved permanent food facility and held at temperatures required by this chapter.
(b)Limited food preparation does not include any of the following:
(1)Slicing and chopping potentially hazardous food, other than produce, unless it is on the heated cooking surface.
(2)Thawing.
(3)Cooling of cooked, potentially hazardous food.
(4)Grinding raw ingredients or potentially hazardous food.
(5)Washing of foods.
(6)Cooking of potentially hazardous foods for later use.
(7)Manufacturing, freezing, processing, or packaging of milk, milk products, or products resembling milk products subject to licensing under Division 15 (commencing with Section 32501) of the Food and Agricultural Code.
SEC. 5.SEC. 6.Section 113838 is added to the Health and Safety Code, to read:113838.(a)Noncontinuous cooking, also known as par-cooking, means the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service.
(b)Noncontinuous cooking does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
SEC. 6.SEC. 7.Section 113941 of the Health and Safety Code is amended to read:113941.Warm water means water that is supplied through a mixing valve or combination faucet at a temperature of at least 85oF but not greater than 108oF.
SEC. 7.SEC. 8.Section 113953 of the Health and Safety Code is amended to read:113953.(a)Handwashing facilities shall be provided within or adjacent to toilet rooms. The number of handwashing facilities required shall be in accordance with local building and plumbing codes.
(b)(1)Except as otherwise provided in Section 114358, food facilities constructed or extensively remodeled after January 1, 1996, that handle nonprepackaged food, shall provide facilities exclusively for handwashing in food preparation areas and in warewashing areas that are not located within or immediately adjacent to food preparation areas. Handwashing facilities shall be sufficient in number and conveniently located so as to be accessible at all times for use by food employees.
(2)The handwashing facility shall be separated from the warewashing sink by a metal splashguard with a height of at least 6 six inches, that extends from the back edge of the drainboard to the front edge of the drainboard, the corners of the barrier to be rounded. No splashguard is required if the distance between the handwashing sink and the warewashing sink drainboards is 24 inches or more.
(c)(1)Handwashing facilities shall be equipped to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet.
(2)A steam mixing valve shall not be used at a handwashing sink.
(3)A self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet.
(d)An automatic handwashing facility may be installed and used in accordance with the manufacturers instructions.
(e)Notwithstanding subdivision (b), the enforcement agency may allow handwashing facilities other than those required by this section when it deems that the alternate facilities are adequate.
SEC. 8.SEC. 9.Section 114009 is added to the Health and Safety Code, to read:114009.Raw animal foods that are cooked using a noncontinuous cooking process shall be all of the following:
(a)Subject to an initial heating process that is no longer than 60 minutes in duration.
(b)Immediately after initial heating, cooled according to the time and temperature parameters specified under Section 114002 for cooked potentially hazardous foods.
(c)After cooling, held frozen or cold, as specified for potentially hazardous foods under subdivision (d) of Section 113996.
(d)Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under Section 114004.
(e)Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods under Section 114002 if not either hot held, as specified under subdivision (a) of Section 113996, served immediately, or held using time as a public health control, as specified under Section 114000, after complete cooking.
(f)Prepared and stored according to written procedures that meet all of the following conditions:
(1)Are maintained in the food facility and are available to the enforcement agency upon request.
(2)Describe how the requirements specified under subdivisions (a) to (e), inclusive, are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met.
(3)Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be cooked as specified under subdivision (d) prior to being offered for sale or service.
(4)Describe how the foods, after initial heating but prior to cooking as specified under subdivision (d), are to be separated from ready-to-eat foods.
SEC. 9.SEC. 10.Section 114157 of the Health and Safety Code is amended to read:114157.(a)A temperature measuring device shall be provided for each refrigeration unit.
(b)The temperature measuring device shall be located to indicate the air temperature in the warmest part of the unit and, except for vending machines, the temperature reading shall be readily visible.
(c)Except as specified in subdivision (d), cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the devices temperature display. Alternative hot or cold holding equipment can be equipped with approved product mimicking sensors placed in devices located in the warmest part of the mechanically refrigerated unit in lieu of an ambient air sensor.
(d)Subdivision (c) shall not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, bain-maries, steam tables, insulated food transport containers, and salad bars.
(e)Temperature measuring devices shall be easily readable and have a numerical scale, printed record, or digital readout in increments no greater than 2F or over the intended range of use.
SEC. 10.SEC. 11.Section 114201 of the Health and Safety Code is amended to read:114201.(a)If provided, a grease trap or grease interceptor shall not be located in a food preparation or utensil handling area unless specifically approved by the enforcement agency.
(b)Grease traps and grease interceptors shall be easily accessible for servicing.
(c)Notwithstanding subdivision (a), this section shall not apply to either of the following:
(1)An aboveground grease trap installed under a three-compartment sink under the following conditions:
(A)A structural hardship can be determined preventing the grease trap from being installed in an area not designated for food preparation or storage or a utensil handling area.
(B)The site can provide a cleaning or maintenance plan that indicates how and when this grease trap will be accessed for service to prevent any cross contamination of food or food contact surfaces.
(C)The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
(2)Any food facility approved with a grease trap or grease interceptor that is in operation before the effective date of this part.
SEC. 11.SEC. 12.Section 114259.2 of the Health and Safety Code is amended to read:114259.2.(a)Passthrough window service openings that are limited to no more than 216 square inches shall not be closer together than 18 inches and shall be provided with a solid or screened window that is closed when not in use. Screening shall be at least 16 mesh per square inch. The counter surface of the service openings shall be smooth and easily cleanable.
(b)A passthrough window service opening of up to 432 square inches is approved if equipped with an air curtain device or equipped with a self-closing device. The counter surface of the service opening shall be smooth and easily cleanable.
(c)At a drive-through, a passthrough window service opening that is larger than 432 square inches is approved if equipped with both a self-closing device and an air curtain device. The counter surface of the service opening shall be smooth and easily cleanable.
SEC. 12.SEC. 13.Section 114271 of the Health and Safety Code is amended to read:114271.(a)Except as provided in subdivision (b), the walls and ceilings of all rooms shall be of a durable, smooth, nonabsorbent, and easily cleanable surface.
(b)This section shall not apply to any of the following areas:
(1)Walls and ceilings of bar areas in which beverages are sold, served, or dispensed directly to the consumers, except wall areas adjacent to bar sinks and areas where foods, including beverages, are prepared.
(2)Areas where food is stored only in unopened bottles, cans, cartons, sacks, or other original shipping containers.
(3)Dining and sales areas.
(4)Offices.
(5)Restrooms that are used exclusively by the employees or consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
(6)Dressing rooms, dressing areas, or locker areas.
(c)Acoustical paneling may be utilized if it is installed not less than six feet above the floor. The paneling shall meet the other requirements of this section.
(d)Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning.
(e)Attachments to walls and ceilings, such as light fixtures, mechanical room ventilation system components, vent covers, wall mounted fans, decorative items, and other attachments, shall be easily cleanable.
SEC. 13.SEC. 14.Section 114349 of the Health and Safety Code is amended to read:114349.(a)Temporary food facilities shall be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Overhead protection shall be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants.
(b)Temporary food facilities that handle nonprepackaged food shall also protect food from contamination in one of the following ways:
(1)Enclosure of the food facility with 16 mesh per square inch screens.
(2)Limiting display and handling of nonprepackaged food in food compartments.
(3)Other alternative, effective means approved by the enforcement officer.
(c)Notwithstanding Section 113984, this section does not apply to temporary food facilities that are approved for limited food preparation if flying insects, vermin, birds, other pests, and environmental factors, including, but not limited to, precipitation and wind that could contaminate the food, are absent due to the location of the facility or other limiting conditions.
SEC. 14.SEC. 15.The Legislature finds and declares that establishing a narrowly tailored, statewide framework for low-risk, like-for-like restaurant equipment installations, which furthers uniform standards for restaurant permitting, contractor licensing, and public safety responsibilities that are already governed by state law, is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 16 (commencing with Section 66360) to Division 1 of Title 7 of the Government Code applies to all cities, including charter cities.
SEC. 15.SEC. 16.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because a local agency or school district has the authority to levy service charges, fees, or assessments sufficient to pay for the program or level of service mandated by this act or because costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
However, if the Commission on State Mandates determines that this act contains other costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
A false statement made in a certification submitted pursuant to Chapter 16 (commencing with Section 66360) of Division 1 of Title 7 of the Government Code constitutes grounds for disciplinary action by the Contractors State License Board.
SEC. 2.Chapter 16 (commencing with Section 66360) is added to Division 1 of Title 7 of the Government Code, to read:16.Accelerated Restaurant Equipment Installation Approval66360.For purposes of this chapter, all the following definitions apply:
(a)Licensed commercial contractor means a contractor, as defined in Section 7026 of the Business and Professions Code, licensed pursuant to Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, holding a valid and active license in good standing in the appropriate classification for the work performed.
(b)Like-for-like equipment installation means the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
(1)Change the use or occupancy classification of the building.
(2)Alter structural or load-bearing elements.
(3)Modify fire or life safety systems, except for direct connection to existing approved systems.
(4)Increase approved utility capacity.
(5)Require discretionary review.
(c)Qualified licensed contractor certifier means a licensed commercial contractor who satisfies all the following:
(1)Holds a valid license in good standing in the appropriate classification for the work performed.
(2)Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
(3)Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
(4)Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
(d)Restaurant has the same meaning as defined in subdivision (b) of Section 66345.1 of the Government Code.
66360.1.(a)(1)Upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant, a local building department shall allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
(2)A certification submitted pursuant to this chapter shall satisfy the inspection requirement for the qualifying installation.
(3)Certification pursuant to this chapter shall be at the applicants expense and shall not exempt the project from permit requirements.
(b)A qualified licensed contractor certifier shall submit an affidavit, under penalty of perjury, attesting to both of the following:
(1)The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
(2)The work performed is limited to a like-for-like equipment installation.
(c)(1)The local building department shall approve or deny a complete permit application within 10 business days of receipt.
(2)If the local building department does not approve or deny the application within the timeframe specified in paragraph (1), the permit shall be deemed approved for permitting purposes, provided all required fees have been paid.
66360.2.(a)A qualified licensed contractor certifier shall be liable for damages arising from negligent or false certification under this chapter.
(b)The applicant shall indemnify the local agency from property damage or personal injury arising from construction performed pursuant to this chapter.
(c)A false statement made in a certification submitted pursuant to this chapter shall constitute grounds for disciplinary action by the Contractors State License Board, pursuant to Section 7710.2 of the Business and Professions Code, and may constitute grounds for a conviction of perjury.
66360.3.A city, county, or city and county shall adopt reasonable administrative requirements to implement this chapter.
SEC. 3.Section 18941.18 is added to the Health and Safety Code, to read:18941.18.(a)For the purposes of this section, alcohol has the same meaning as defined in Section 23003 of the Business and Professions Code.
(b)As a part of the next triennial update of the California Building Standards Code (Title 24 of the California Code of Regulations) that occurs on or after January 1, 2027, the commission shall adopt building standards that do all the following:
(1)Authorizes a business establishment that is takeout only to operate without providing customer restrooms.
(2)Authorizes a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
(3)Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
(4)Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
(5)Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
(6)Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood, as described in Section 508.0 of the California Mechanical Code (Part 4 of Title 24 of the California Code of Regulations) over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor.
(7)Authorizes a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
SEC. 4.Section 113818 of the Health and Safety Code is amended to read:113818.(a)Limited food preparation means food preparation that is restricted to one or more of the following:
(1)Heating, frying, baking, roasting, popping, shaving of ice, blending, steaming or boiling of hot dogs, or assembly of nonprepackaged food.
(2)Dispensing and portioning of nonpotentially hazardous food or dispensing and portioning for immediate service to a customer of food that has been temperature controlled until immediately prior to portioning or dispensing.
(3)Holding, portioning, and dispensing of any foods that are prepared for satellite food service by the onsite permanent food facility or prepackaged by another approved source.
(4)Holding, portioning, and dispensing of any foods that are prepared by a catering operation.
(5)Slicing and chopping of nonpotentially hazardous food or produce that has been washed at an approved facility or slicing and chopping of food on a heated cooking surface during the cooking process.
(6)Cooking and seasoning to order.
(7)Juicing or preparing beverages that are for immediate service, in response to an individual consumer order, that do not contain frozen milk products.
(8)Hot and cold holding of food that has been prepared at an approved permanent food facility.
(9)Reheating of food that has been previously prepared at an approved permanent food facility and held at temperatures required by this chapter.
(b)Limited food preparation does not include any of the following:
(1)Slicing and chopping potentially hazardous food, other than produce, unless it is on the heated cooking surface.
(2)Thawing.
(3)Cooling of cooked, potentially hazardous food.
(4)Grinding raw ingredients or potentially hazardous food.
(5)Washing of foods.
(6)Cooking of potentially hazardous foods for later use.
(7)Handling, manufacturing, Manufacturing, freezing, processing, or packaging of milk, milk products, or products resembling milk products subject to licensing under Division 15 (commencing with Section 32501) of the Food and Agricultural Code.
SEC. 5.Section 113838 is added to the Health and Safety Code, to read:113838.(a)Noncontinuous cooking, also known as par-cooking, means the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service.
(b)Noncontinuous cooking does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
SEC. 6.Section 113941 of the Health and Safety Code is amended to read:113941.Warm water means water that is supplied through a mixing valve or combination faucet at a temperature of at least 100oF. 85oF but not greater than 108oF.
SEC. 7.Section 113953 of the Health and Safety Code is amended to read:113953.(a)Handwashing facilities shall be provided within or adjacent to toilet rooms. The number of handwashing facilities required shall be in accordance with local building and plumbing codes.
(b)(1)Except as otherwise provided in Section 114358, food facilities constructed or extensively remodeled after January 1, 1996, that handle nonprepackaged food, shall provide facilities exclusively for handwashing in food preparation areas and in warewashing areas that are not located within or immediately adjacent to food preparation areas. Handwashing facilities shall be sufficient in number and conveniently located so as to be accessible at all times for use by food employees.
(2)The handwashing facility shall be separated from the warewashing sink by a metal splashguard with a height of at least 6 inches, that extends from the back edge of the drainboard to the front edge of the drainboard, the corners of the barrier to be rounded. No splashguard is required if the distance between the handwashing sink and the warewashing sink drainboards is 24 inches or more.
(c)(1)Handwashing facilities shall be equipped to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet. If the temperature of water provided to a handwashing sink is not readily adjustable at the faucet, the temperature of the water shall be at least 100F, but not greater than 108F.
(2)A steam mixing valve shall not be used at a handwashing sink.
(3)A self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet.
(d)An automatic handwashing facility may be installed and used in accordance with the manufacturers instructions.
(e)Notwithstanding subdivision (b), the enforcement agency may allow handwashing facilities other than those required by this section when it deems that the alternate facilities are adequate.
SEC. 8.Section 114009 is added to the Health and Safety Code, to read:114009.Raw animal foods that are cooked using a noncontinuous cooking process shall be all of the following:
(a)Subject to an initial heating process that is no longer than 60 minutes in duration.
(b)Immediately after initial heating, cooled according to the time and temperature parameters specified under Section 114002 for cooked potentially hazardous foods.
(c)After cooling, held frozen or cold, as specified for potentially hazardous foods under subdivision (d) of Section 113996.
(d)Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under Section 114004.
(e)Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods under Section 114002 if not either hot held, as specified under subdivision (a) of Section 113996, served immediately, or held using time as a public health control, as specified under Section 114000, after complete cooking.
(f)Prepared and stored according to written procedures that meet all of the following conditions:
(1)Are maintained in the food facility and are available to the enforcement agency upon request.
(2)Describe how the requirements specified under subdivisions (a) to (e), inclusive, are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met.
(3)Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be cooked as specified under subdivision (d) prior to being offered for sale or service.
(4)Describe how the foods, after initial heating but prior to cooking as specified under subdivision (d), are to be separated from ready-to-eat foods.
SEC. 9.Section 114157 of the Health and Safety Code is amended to read:114157.(a)A thermometer temperature measuring device shall be provided for each refrigeration unit.
(b)The thermometer temperature measuring device shall be located to indicate the air temperature in the warmest part of the unit and, except for vending machines, shall be affixed to the temperature reading shall be readily visible.
(c)Except as specified in subdivision (d), cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the devices temperature display. Alternative hot or cold holding equipment can be equipped with approved product mimicking sensors placed in devices located in the warmest part of the mechanically refrigerated unit in lieu of an ambient air sensor.
(d)Subdivision (c) shall not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars.
(e)Temperature measuring devices shall be easily readable and have a numerical scale, printed record, or digital readout in increments no greater than 2F or over the intended range of use.
SEC. 10.Section 114201 of the Health and Safety Code is amended to read:114201.(a)If provided, a grease trap or grease interceptor shall not be located in a food preparation or utensil handling area unless specifically approved by the enforcement agency.
(b)Grease traps and grease interceptors shall be easily accessible for servicing.
(c)Notwithstanding subdivision (a), this section shall not apply to either of the following:
(1)An aboveground grease trap installed under a three-compartment sink under the following conditions:
(A)A structural hardship can be determined preventing the grease trap from being installed in an area not designated for food preparation or storage or a utensil handling area.
(B)The site can provide a cleaning or maintenance plan that indicates how and when this grease trap will be accessed for service to prevent any cross contamination of food or food contact surfaces.
(C)The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
(c)Notwithstanding subdivision (a), those(2)Any food facilities facility approved with a grease trap or grease interceptor that are is in operation before the effective date of this part are not required to comply with this section. part.
SEC. 11.Section 114259.2 of the Health and Safety Code is amended to read:114259.2.(a)Passthrough window service openings shall be that are limited to no more than 216 square inches each. The service openings shall not be closer together than 18 inches. Each opening inches and shall be provided with a solid or screened window, equipped with a self-closing device. window that is closed when not in use. Screening shall be at least 16 mesh per square inch. Passthrough windows of up to 432 square inches are approved if equipped with an air curtain device. The counter surface of the service openings shall be smooth and easily cleanable.
(b)A passthrough window service opening of up to 432 square inches is approved if equipped with an air curtain device or equipped with a self-closing device. The counter surface of the service opening shall be smooth and easily cleanable.
(c)At a drive-through, a passthrough window service opening that is larger than 432 square inches is approved if equipped with both a self-closing device and an air curtain device. The counter surface of the service opening shall be smooth and easily cleanable.
SEC. 12.Section 114271 of the Health and Safety Code is amended to read:114271.(a)Except as provided in subdivision (b), the walls and ceilings of all rooms shall be of a durable, smooth, nonabsorbent, and easily cleanable surface.
(b)This section shall not apply to any of the following areas:
(1)Walls and ceilings of bar areas in which alcoholic beverages are sold sold, served, or served dispensed directly to the consumers, except wall areas adjacent to bar sinks and areas where food is foods, including beverages, are prepared.
(2)Areas where food is stored only in unopened bottles, cans, cartons, sacks, or other original shipping containers.
(3)Dining and sales areas.
(4)Offices.
(5)Restrooms that are used exclusively by the employees or consumers, except that the walls and ceilings in the restrooms shall be of a nonabsorbent and washable surface.
(6)Dressing rooms, dressing areas, or locker areas.
(c)Acoustical paneling may be utilized if it is installed not less than six feet above the floor. The paneling shall meet the other requirements of this section.
(d)Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning.
(e)Attachments to walls and ceilings, such as light fixtures, mechanical room ventilation system components, vent covers, wall mounted fans, decorative items, and other attachments, shall be easily cleanable.
SEC. 13.Section 114349 of the Health and Safety Code is amended to read:114349.(a)Temporary food facilities shall be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Overhead protection shall be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants.
(b)Temporary food facilities that handle nonprepackaged food shall also protect food from contamination in one of the following ways:
(1)Enclosure of the food facility with 16 mesh per square inch screens.
(2)Limiting display and handling of nonprepackaged food in food compartments.
(3)Other alternative, effective means approved by the enforcement officer.
(c)Notwithstanding Section 113984, this section does not apply to temporary food facilities that are approved for limited food preparation if flying insects, vermin, birds, other pests, and other pests environmental factors, including, but not limited to, precipitation and wind that could contaminate the food, are absent due to the location of the facility or other limiting conditions.
SEC. 14.The Legislature finds and declares that establishing a narrowly tailored, statewide framework for low-risk, like-for-like restaurant equipment installations, which furthers uniform standards for restaurant permitting, contractor licensing, and public safety responsibilities that are already governed by state law, is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 16 (commencing with Section 66360) to Division 1 of Title 7 of the Government Code applies to all cities, including charter cities.
SEC. 15.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because a local agency or school district has the authority to levy service charges, fees, or assessments sufficient to pay for the program or level of service mandated by this act or because costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
However, if the Commission on State Mandates determines that this act contains other costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
SECTION 1.It is the intent of the Legislature to enact subsequent legislation to support Californias neighborhood restaurants. REVISIONS: HeadingLines 1 and 2.It is the intent of the Legislature to enact subsequent legislation to support Californias neighborhood restaurants.
|
Date
|
Status
|
|---|---|
| Aug 13, 2026 | In committee: Held under submission. |
| Aug 3, 2026 | In committee: Referred to APPR. suspense file. |
| Jul 1, 2026 | Read second time and amended. Re-referred to Com. on APPR. |
| Jun 30, 2026 | From committee: Amend, and do pass as amended and re-refer to Com. on APPR. (Ayes 11. Noes 0.) (June 29). |
| Jun 25, 2026 | From committee: Do pass and re-refer to Com. on B. P. & E.D. (Ayes 10. Noes 0.) (June 24). Re-referred to Com. on B. P. & E.D. |
| Jun 25, 2026 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on B. P. & E.D. |
| Jun 18, 2026 | From committee: Do pass and re-refer to Com. on HOUSING. (Ayes 11. Noes 0.) (June 17). Re-referred to Com. on HOUSING. |
| Jun 10, 2026 | Referred to Coms. on HEALTH, HOUSING and B. P. & E.D. |
| May 28, 2026 | In Senate. Read first time. To Com. on RLS. for assignment. |
| May 27, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 79. Noes 0. Page 5475.) |
| May 27, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 79. Noes 0.) |
| May 27, 2026 | Read third time. Passed. Ordered to the Senate. |
| May 18, 2026 | Read second time. Ordered to third reading. |
| May 14, 2026 | Joint Rule 62(a), file notice suspended. (Page 5030.) |
| May 14, 2026 | Coauthors revised. |
| May 14, 2026 | From committee: Do pass. (Ayes 15. Noes 0.) (May 14). |
| May 14, 2026 | Joint Rule 62(a), file notice suspended. |
| May 13, 2026 | In committee: Set, first hearing. Referred to APPR. suspense file. |
| Apr 21, 2026 | From committee: Do pass and re-refer to Com. on APPR. with recommendation: To Consent Calendar. (Ayes 18. Noes 0.) (April 21). Re-referred to Com. on APPR. |
| Apr 15, 2026 | From committee: Do pass and re-refer to Com. on B. & P. (Ayes 16. Noes 0.) (April 14). Re-referred to Com. on B. & P. |
| Apr 15, 2026 | Coauthors revised. |
| Mar 24, 2026 | Re-referred to Com. on HEALTH. |
| Mar 23, 2026 | From committee chair, with author's amendments: Amend, and re-refer to Com. on HEALTH. Read second time and amended. |
| Mar 23, 2026 | Referred to Coms. on HEALTH and B. & P. |
| Feb 13, 2026 | From printer. May be heard in committee March 15. |
| Feb 12, 2026 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 3, 2026 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Jun 29, 2026 | Do pass as amended, but first amend, and re-refer to the Committee on [Appropriations] | Senate Standing Committee on Business, Professions and Economic Development |
Passed |
|
| Jun 24, 2026 | Do pass, but first be re-referred to the Committee on [Business, Professions and Economic Development] | Senate Standing Committee on Housing |
Passed |
|
| Jun 17, 2026 | Do pass, but first be re-referred to the Committee on [Housing] | Senate Standing Committee on Health |
Passed |
|
| May 27, 2026 | AB 1915 Gabriel Assembly Third Reading | Assembly Floor |
Passed |
|
| May 14, 2026 | Do pass. | Assembly Standing Committee on Appropriations |
Passed |
|
| Apr 21, 2026 | Do pass and be re-referred to the Committee on [Appropriations] with recommendation: To Consent Calendar | Assembly Standing Committee on Business and Professions |
Passed |
|
| Apr 14, 2026 | Do pass and be re-referred to the Committee on [Business and Professions] | Assembly Standing Committee on Health |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| Betsy Restaurant | ** Support | |
| Bub and Grandma's | ** Support | |
| Burger She Wrote | ** Support | |
| Cafe Tropical Group LLC | ** Support | |
| California Association for Micro Enterprise Opportunity | ** Support | |
| California Association of Environmental Health Administrators | ** Support | |
| California Building Officials | ** Against | |
| California Chamber Of Commerce | ** Support | |
| California Community Foundation | ** Support | |
| California Contractors State License Board | ** Against | |
| California Restaurant Association | ** Support | |
| California Travel Association | ** Support | |
| Central City Association Of Los Angeles | ** Support | |
| Chick-fil-A | ** Support | |
| Civil Coffee | ** Support | |
| Contractors State License Board | ** Against | |
| Council of Infill Builders | ** Support | |
| Day by Day Hospitality | ** Support | |
| Ferrazzanis | ** Support | |
| Golden Gate Restaurant Association | ** Support | |
| Greater San Fernando Valley Chamber of Commerce | ** Support | |
| Guelaguetza Restaurant | ** Support | |
| Inclusive Action for the City | ** Support | |
| Independent Hospitality Association | ** Support | |
| Independent Hospitality Coalition | ** Support | |
| Jolie Limited Partnership | ** Support | |
| Last Word Hospitality | ** Support | |
| Latino Restaurant Association | ** Support | |
| Little Tokyo Service Center | ** Support | |
| Los Angeles Area Chamber Of Commerce | ** Support | |
| Los Angeles County Business Federation | ** Support | |
| Los Angeles County Business Federation (BIZ-FED) | ** Support | |
| Old Growth Hospitality, LLC | ** Support | |
| The Chocolate Dispensary | ** Support | |
| The Lucques Group | ** Support | |
| Truly Pizza | ** Support | |
| VALLEY INDUSTRY AND COMMERCE ASSOCIATION | ** Support | |
| Venice Chamber of Commerce | ** Support | |
| Westside Council Of Chambers Of Commerce | ** Support | |
| West Valley Warner Center Chamber of Commerce | ** Support | |
| Whole Cluster Hospitality | ** Support | |
| Woon | ** Support |
SENATE COMMITTEE ON
Senator Sabrina Cervantes, Chair
2025 - 2026 Regular Session
AB 1915 (Gabriel) - Accelerated restaurant equipment permitting approval: retail food safety
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
AB 1915 would establish a process for accelerated restaurant equipment installation approval, require the California Building Standards Commission to adopt specified building standards, and make changes to the California Retail Food Code.
Fiscal Impact:
- The Department of General Services (DGS) indicates that because the California Building Standards Commission currently lacks the authority and expertise for these types of building standards, the commission would need limited-term staff to research, develop, and propose the subject standards. This would result in costs of $296,000 in 2029-30 and $306,000 in 2030-31 (DGS Service Revolving Fund). Additionally, the commission may require access to consultants with expertise in public health at an unknown but likely significant additional cost. Current law requires state agencies to pay a proportionate share of the cost to review and publish California Building Standards Commission regulations, which is paid into the DGS Service Revolving Fund. According to DGS, implementation of this bill would necessitate a temporary increase to the revolving fund, which would result in a corresponding increase in costs to state agencies to pay their proportionate share during fiscal years 2029-30 and 2030-31.
- The Contractors State License Board estimates the following costs (Contractors License Fund):
- Costs of $365,000 in 2026-27 and $349,000 in 2027-28 and ongoing thereafter for staffing resources for workload related to an increase in the number of complaints filed by local building departments, other agencies, and consumers regarding negligent or false certifications of compliance with building codes. According to statewide data, more than 85,000 restaurants operate in California. Based on estimated data, the board projects an additional workload of at least 150 new complaints annually and 110 would require investigation and potential disciplinary action.
- The board anticipates that 25 percent of these cases (about 28 annually) may require referral to the Attorney General (AG) for potential perjury charges and half of those may be contested and proceed to trial with the Office of Administrative Hearings (OAH). This would result in an estimated $224,000 in additional AG costs and $280,000 in additional OAH costs, annually.
- The board anticipates that about half of the 110 annual cases would require an industry expert to inspect the equipment installed and testify at hearings. At an estimated average of $2,000 per inspection, the total costs would be approximately $110,000, annually.
- Revenues collected from civil penalties may be negligible. For an estimated 28 complaints referred to the AG for disciplinary action, and at $1,500 per citation, revenues could be approximately $42,000 annually.
- The California Department of Public Health anticipates no fiscal impact for state administration related to the California Retail Food Code provisions.
- Unknown, potential workload costs to the courts related to enforcement of civil penalties under the bill (Trial Court Trust Fund, General Fund). While the courts are not funded on a workload basis, an increase in workload could result in delayed court services and would put pressure on the General Fund to increase the amount appropriated for trial court operations.
- Unknown potential costs to local agencies. Costs would not be reimbursable by the state to the extent local agencies have the authority to levy fees to cover the costs of the required activities. Other costs may be potentially reimbursable by the state, subject to a determination by the Commission on State Mandates.
Background:
Accelerated Restaurant Building Plan Approval. Current law requires a local building department to allow, upon request from an applicant for a permit for a tenant improvement relating to a restaurant, a qualified professional certifier to certify compliance with all applicable building, health, and safety codes. The local building department must approve or deny the applications within specified timelines. An architect licensed by the California Architects Board or a professional engineer licensed by the Board for Professional Engineers, Land Surveyors and Geologists may serve as a qualified professional certifier, subject to specified conditions.
Contractors State License Board (CSLB). The CSLB is responsible for enforcing and administering the Contractors State License Law and regulations related to the licensure, practice and discipline of the construction industry in California. Current law provides that willful or deliberate disregard and violation of the building laws of the state, or of any political subdivision thereof, or of any of the following references to or provisions of law, constitutes a cause for disciplinary action against a licensee. Current law requires the CSLB to assess a civil penalty in an amount not less than $1,500 nor greater than $30,000 for certain violations.
California Building Standards Commission (CBSC). The CBSC is responsible for establishing the process for adopting state building standards under the California Building Standards Law. The CBSC’s duties include the following: receiving proposed building standards from state agencies for consideration in each triennial and intervening building code adoption cycle; reviewing and approving building standards submitted by state agencies; adopting building standards for state buildings where no other state agency is authorized by law; and publishing the approved building standards in the California Building Standards Code. Current law authorizes local governments to enact ordinances or regulations that make building standards amendments to the Building Standards Code, as specified.
California Retail Food Code. Current law establishes the California Retail Food Code (CalCode) to provide for the regulation of retail food facilities. Health and sanitation standards are established at the state level through the CalCode, while enforcement is charged to local agencies, carried out by the 58 county environmental health departments, and four city environmental health departments The CalCode includes some building specifications, including types of handwashing requirements, what surfaces are required to be made of, cooking vent hood requirements etc. Current law requires any construction, alteration, remodeling, or operation of a food facility to be approved by the local enforcement agency, and to be in accordance with all applicable local, state, and federal statutes, regulations, and ordinances, including fire, building, and zoning codes.
Proposed Law:
Specific provisions of the bill would:
- Define “like-for-like equipment installation” to mean the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
- Change the use or occupancy classification of the building.
- Alter structural or load-bearing elements.
- Modify fire or life safety systems, except for direct connection to existing approved systems.
- Increase approved utility capacity.
- Require discretionary review.
- Define “qualified licensed contractor certifier” to mean a licensed contractor who satisfies all the following:
- Does not contract for or perform initial installation of like-for-like equipment they are certifying.
- Is unaffiliated with the contractor performing the like-for-like equipment installation.
- Holds a valid license in good standing in the appropriate classification for the work performed.
- Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
- Maintains commercial general liability insurance in an amount not less than $2,000,000 per occurrence.
- Is not subject to any current suspension, probation, or enforcement action by the CSLB.
- Require, upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant, a local building department must allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes; require a certification submitted to satisfy the inspection requirement for the qualifying installation; and require certification to be at the applicant’s expense and cannot exempt the project from permit requirements.
- Require a qualified licensed contractor certifier to submit an affidavit, under penalty of perjury, attesting to both of the following:
- The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
- The work performed is limited to a like-for-like equipment installation.
- Require the local building department to approve or deny a complete permit application within 10 business days of receipt; and provide that if the local building department does not approve or deny the application within the timeframe, the permit must be deemed approved for permitting purposes, provided all required fees have been paid.
- Require that a qualified licensed contractor certifier is liable for damages arising from negligent or false certification; require the applicant to indemnify the local agency from property damage or personal injury arising from construction performed pursuant to these provisions chapter; require that a false statement made in a certification must constitute grounds for disciplinary action by the CSLB, and may constitute grounds for a conviction of perjury; and require the CSLB to assess a civil penalty in an amount not less than $1,500 nor greater than $30,000 for this violation.
- Require the CBSC as a part of the next triennial update of the California Building Standards Code that occurs on or after January 1, 2027, to adopt building standards that do all the following:
- Authorizes a business establishment that is takeout only to operate without providing customer restrooms.
- Authorizes a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
- Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
- Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
- Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
- Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood, as described, over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor.
- Authorizes a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
- Define “noncontinuous cooking,” also known as “par-cooking,” to mean the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service; provide that “noncontinuous cooking” does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process; and add requirements in the CalCode regarding raw animal foods that are cooked using a noncontinuous cooking process.
- Make changes to the CalCode related to handwashing facilities, grease traps, passthrough window service openings, and other requirements.
Related Legislation:
SB 918 (Seyarto) would make changes to requirements for retail food facilities related to “passthrough window service openings.” The bill is currently on the Senate floor.
AB 1693 (Zbur) would establish a process for accelerated retailer building plan approval. The bill is currently in this committee.
-- END --
SENATE COMMITTEE ON
BUSINESS, PROFESSIONS AND ECONOMIC DEVELOPMENT
Senator Dr. Aisha Wahab, Chair
2025 - 2026 Regular
Bill No: Hearing Date: June 29, 2026
Author: | |||
Version: |
| ||
Urgency: | Fiscal: | ||
Consultant: | |||
Subject:
SUMMARY:
Requires a local building department to allow a “qualified licensed contractor certifier,” as defined, to submit a certification of compliance with all applicable building codes upon the request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant to satisfy the inspection requirement. Requires a contractor to meet specified criteria to serve as a “qualified licensed contractor certifier” and sign the certification under penalty of perjury. Subjects the “qualified licensed contractor certifier” to disciplinary action or a fine by the Contractors State License Board (CSLB) for fraudulent statements made on a certification.
NOTE:
This bill is triple-referred. It was previously heard in the Senate Committee on Health on June 17, 2026, and passed with a vote of 11-0. It was also previously heard in the Senate Committee on Housing on June 24, 2026, and passed with a vote of 10-0.
Existing law:
- Establishes the CSLB to enforce and administer the Contractors State License Law (License Law). (Business and Professions Code (BPC) § 7000 et seq.)
- Defines “contractor” to include any person, consultant to an owner-builder, firm, association, organization, partnership, business trust, corporation, or company, who or which undertakes, offers to undertake, purports to have the capacity to undertake, or submits a bid to construct any building or home improvement project, or part thereof. (BPC § 7026.1(a)(2)(A))
- Establishes that, unless exempted from licensure, it is a misdemeanor for a person to engage in the business of, or act in the capacity of, a contractor if the person is not licensed in accordance with the License Law. (BPC § 7028(a)(1))
- States that are willful or deliberate disregard and violation of the building laws of the state, or of any political subdivision thereof, by a licensee is cause for disciplinary action and will result in a civil penalty assessed by CSLB in an amount not less than one thousand five hundred dollars ($1,500) nor greater than thirty thousand dollars ($30,000). (BPC §§ 7110, 7099.2(b)(1))
- Establishes the California Building Standards Commission (Commission) within the Department of General Services and requires the Commission to administer the processes related to the adoption, approval, publication, and implementation of California’s building codes, which serve as the basis for the design and construction of buildings in California. (Health and Safety Code (HSC) §§ 18901 et seq.)
- Requires a local agency to contract with or employ a private entity or persons on a temporary basis to perform plan checking functions upon the request of an applicant for a nonresidential permit for the remodeling or tenant improvements of a building, as specified, where there is an “excessive delay” in checking the plans and specifications that are submitted as a part of the application. (HSC § 19837)
- Establishes the California Retail Food Code (CRFC) to provide for the regulation of retail food facilities, establish health and sanitation standards at the state level through the CRFC, and assign enforcement to local agencies of the 58 county environmental health departments and four city environmental health departments (Berkeley, Long Beach, Pasadena, and Vernon). (HSC § 113700 et seq.)
- Defines “warm water” as water that is supplied through a mixing valve or combination faucet at a temperature of at least 100 degrees Fahrenheit. (HSC § 113941)
- Requires handwashing facilities to be equipped to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet; requires the temperature of the water to be at least 100°F, but not greater than 108°F if the temperature of water provided to a handwashing sink is not readily adjustable at the faucet. (HSC § 113953(c))
- Prohibits a grease trap interceptor, if provided, from being located in a food or utensil handling area unless specifically approved and requires grease traps and grease interceptors to be easily accessible for servicing. (HSC § 114201)
- Prohibits passthrough service windows limited to 216 square inches each from being closer than 18 inches and requires each opening to be provided with a solid or screened window equipped with a self-closing device. Approves passthrough windows of up to 432 square inches if equipped with an air curtain device. (HSC § 114259.2)
This bill:
- Requires a local building department to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant to satisfy the inspection requirement for the qualifying installation at the applicant’s expense.
- Defines a “licensed contractor” for the purposes of this bill as the same as defined in BPC § 7026, holding a valid and active license in good standing in the appropriate classification for the work performed.
- Defines “like-for-like equipment installation” as the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
a) Change the use or occupancy classification of the building.
b) Alter structural or load-bearing elements.
c) Modify fire or life safety systems, except for direct connection to existing approved systems.
c) Increase approved utility capacity.
d) Require discretionary review.
- Defines “qualified licensed contractor qualifier” as a licensed contractor who satisfies all the following:
- Holds a valid license in good standing in the appropriate classification for the work performed.
- Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
- Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
- Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
- Holds a valid license in good standing in the appropriate classification for the work performed.
- Defines “restaurant” to mean a retail food establishment that prepares, serves, and vends food directly to the consumer.
- Requires the qualified license contractor certifier to submit an affidavit, under penalty of perjury, attesting that the work performed is a like-for-like equipment installation and complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
- Requires the local building department to approve or deny the permit application withing 10 days of receipt or the application shall be deemed approved, provided all fees have been paid.
- Specifies that a qualified licensed contractor certifier is liable for damages arising from negligent or false certification under this chapter and the applicant is required to indemnify the local agency from property damage or personal injury arising from construction performed.
- Subjects a qualified licensed contractor certifier to disciplinary action by the Contractors State License Board for a false statement made in a certification and provides that the false statement may constitute grounds for a conviction of perjury.
- Authorizes CSLB to assess a fine of not less than one thousand five hundred dollars ($1,500) nor greater than thirty thousand dollars ($30,000) to a contractor acting as a qualified licensed contractor certifier for making a false statement on a certification.
- Requires a city, county, or city and county to adopt reasonable administrative requirements to implement the requirements of this bill.
- Requires the Commission to adopt building standards, as specified, related to business establishments, including those serving food and alcohol, as part of the next triennial update of the California Building Standards Code (Title 24 of the California Code of Regulations) that occurs on or after January 1, 2027.
- Defines “noncontinuous cooking,” also known as “par-cooking,” to mean the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service, but does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
- Clarifies that “warm water” means water that is supplied through a mixing valve or combination faucet at a temperature of at least 85 degrees Fahrenheit, but not greater than 108 degrees Fahrenheit.
- Prohibits a steam mixing valve from being used at a handwashing sink and requires a self-closing, slow-closing, or metering faucet to provide a flow of water for at least 15 seconds without the need to reactivate the faucet.
- Requires raw animal foods that are cooked using a noncontinuous cooking process, as specified.
- Specifies exemptions to grease trap and grease interceptor requirements.
- Allows a retail food facility to have a passthrough service opening of up to 432 square inches if equipped with a self-closing device and larger than 432 square inches if equipped with both a self-closing device and an air-curtain device.
- Makes technical and clarifying amendments to the CRFC.
- States Legislative findings and declarations that narrowly tailored, statewide framework for low-risk, like-for-like restaurant equipment installations, which furthers uniform standards for restaurant permitting, contractor licensing, and public safety responsibilities that are already governed by state law, is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution.
FISCAL EFFECT:
This bill is keyed fiscal by Legislative Counsel. According to the Assembly Committee on Appropriations, BSC would need to hire a two-year limited-term associate architect to research, develop, and propose the subject standards. BSC estimates costs of $296,000 in fiscal year (FY) 2029-30 and $306,000 in FY 2030-31 (Building Standards Administration Special Revolving Fund and Department of General Services (DGS) Service Revolving Fund). BSC explains this bill will also have an unknown fiscal impact to the State Fire Marshal, Department of Health Care Access and Information, Division of the State Architect, Energy Commission, and other agencies through its effects on the funds cited. The bill would also result in costs of an unknown but potentially significant amount to CSLB, which expects this bill will increase complaints from local building departments, other agencies, and consumers regarding negligent or false certifications of compliance with building codes. CSLB notes such cases require the same level of investigative work as other disciplinary matters, including reviewing certification packets submitted by local agencies, coordinating with local building departments to verify permit timelines, and determining whether misrepresentation or false statements warrant disciplinary action. CSLB states it will need an additional position for every additional 53 complaints per year. The bill will also result in costs of an unknown but likely absorbable amount to the California Department of Public Health and the California Conference of Directors of Environmental Health anticipates no costs to local environmental health agencies.
COMMENTS:
- Purpose. This bill is co-sponsored by the Author and the Independent Hospitality Coalition. According to the Author, "California's neighborhood restaurants are the heart of our communities, yet so many are fighting just to survive. AB 1915 is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, our communities are stronger for it."
- Background.
Delays in permitting. California has an extensive and lengthy permitting process for commercial facilities that need improvements. Frequent and common delays in municipal building plan review processes often place undue costs and pressure on small-business owners who face cumbersome hurdles to opening restaurants. Delays have also resulted in longer down times without revenue, longer unemployment periods for staff, and discouraged investment in restaurants that may need upgraded or new equipment.
Local building departments and environmental health agencies enforce state and local building standards and the CFRC and are responsible for evaluating permit applications for compliance. The local building department cannot issue a permit without approval from the local environmental health agency. Existing law allows building departments to contract with a private entity to provide plan-checking services and recent legislation allows applications for a permit to hire qualified professional certifiers to certify the plans comply with all building codes on their behalf.
Proponents of this bill state the burdens are similar even for restaurants that are simply replacing like-for-like equipment that is substantially similar in size, function, and utility demand to the existing equipment. After the work is completed, local building officials conduct various inspections to ensure it was done correctly. but there is no equivalent process to contract with private entities or qualified certifiers for the inspection process.
This bill would require a local building department to allow a “qualified licensed contractor certifier,” to submit a certification of compliance with all applicable building codes upon the request of an applicant for a permit for a like-for-like equipment replacement in a restaurant. The certification of compliance would satisfy the inspection requirement. This bill is intended to reduce delays in restaurant permitting associated with equipment replacement by allowing a qualified third-party contractor to verify the installation was performed correctly.
To serve as a “qualified licensed contractor certifier,” this bill would require a contractor to: 1) be a licensed contractor in good standing; 2) have five years of experience performing commercial food service equipment installation or commercial restaurant construction; maintain $2 million of liability insurance; and not be subject to disciplinary action by CSLB. The qualified licensed contractor certifier would submit an affidavit attesting under penalty of perjury that the equipment installation complies with all building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation and the work performed is a like-for-like equipment installation. If the “qualified licensed contractor certifier” makes a false statement on a certification, the contractor could be subject to discipline by CSLB and/or a civil penalty of $1,500 to $30,000.
Similar legislation allows architects and engineers to serve as plan certifiers. Last year, AB 671 (Wicks, Chapter 470, Statutes of 2025) enacted an expedited plan review program for restaurants. That bill requires a local building or permitting department to allow an applicant to have a qualified professional certifier certify that the plans for a tenant improvement relating to a restaurant comply with applicable building, health, and safety codes and approve the plans within specified timelines.
To implement an expedited review, AB 671 authorizes, upon request of the person seeking the permit, an architect licensed by the California Architects Board or a professional engineer licensed by the Board for Professional Engineers, Land Surveyors and Geologists to serve as a qualified professional certifier. The qualified professional certifier must meet specified requirements similar to this bill – license in good standing, five years of relevant experience, and $2 million of liability insurance – and is required to file an affidavit under penalty of perjury attesting that the plans comply with all building, health, and safety codes. AB 671 also subjects a qualified professional certifier to disciplinary action for making false statements on a certification by their respective licensing board. AB 1915 (Gabriel of 2026) would enact the same for retail establishments.
However, these similar bills require a third-party to certify the plan. In other words, the architect or professional engineer who developed and stamped the plans is not checking their own work. While this bill does not prohibit a third party, the language is not clear about the intent, whether the certifier is supposed to be the contractor who installed the equipment or a third party.
Amendments to Authorize CSLB Fine Authority. CSLB implements and enforces the License Law and regulations related to the licensure, practice and discipline of the construction industry in California. The CSLB licenses approximately 242,000 active contractors in 44 licensing classifications, issues two certifications, and registers approximately 30,000 home improvement salespersons.[1]
Unlike AB 671 (Wicks, Chapter 470, Statutes of 2025) and AB 1693 (Zbur of 2026) that authorize architects and professional engineers to act as qualified professional certifiers for plans and subject the licensees to disciplinary action for false statements on their certifications, this bill would authorize CSLB to take disciplinary action and issue civil penalties for making a false statement.
There are multiple reasons for including civil penalty authority for CSLB:
- The false statement on the installation of equipment can result in a minor and easily remedied error to a violation worthy of discipline, depending on the error and equipment installed. For those that are minor, suspending or revoking a license may not be an appropriate response. Conversely, an architect or professional engineer who makes a false statement regarding plans will likely have major implications for the project and the health and safety of consumers who enter the facility.
- When issuing a citation, CSLB has authority to order rework and/or restitution. This is a critical element considering restaurants may need to pay for another contractor to complete the work and complete a certification if a false statement is made on an affidavit.
- If a licensee does not comply with the terms and conditions of a citation, the license may be automatically suspended and subsequently revoked.
- Citations are disclosed to the public from the date of issuance and for five years after compliance. Disclosure can be longer if the licensee is subject to any other disciplinary action during that five-year period. Disclosure to the public may prevent others from using that contractor to perform similar services.
Willful disregard of the building laws of this state by a contractor are cause for disciplinary action under existing law. The same violation can also subject the contractor to a civil penalty of not less than $1,500 and not more than $30,000.
Although the civil penalties are wide-ranging, CSLB reports it has not yet imposed a maximum fine. That is due to criteria that must be considered when issuing citations, including the: 1) gravity of the violation; 2) the good faith of the licensee; and 3) the history of previous violations (BPC § 125.9). Regulations additionally require CSLB to consider if: 4) the citation includes multiple violations; 5) the violation is serious or harmful; 6) the violation is perpetuated against a senior citizen or disabled person; and 7) the violation involves a construction project in connection with repairs for damages caused by a natural disaster (Title 16 of the California Code of Regulations § 884(b)). Therefore, when fines are issued, the amounts are not arbitrary and are commensurate with the violation.
Additionally, CSLB has existing authority to address minor violations that CAB and BPELSG do not, such as the letter of admonishment, which is a corrective action that may be taken if the violation is considered minor or determined not to be willful. Letters of admonishment are subject to public disclosure of the violation for one or two years, depending on the gravity of the violation, the good faith of the licensee being charged, and the history of previous violations.
Updates to California Retail Food Code. The Author states amendments to the CRFC have been identified by the California Conference of Environmental Health Directors and its restaurant industry partners as sections that are confusing and/or outdated as regulators and restaurants work together to ensure food safety. The Author’s intent is to eliminate confusion, enable improved implementation of the retail food code, and decrease the risk of food borne illness.
- Related Legislation. AB 1693 (Zbur of 2026) would require a local building or permitting department to allow an applicant to have a qualified professional certifier certify that the plans for a tenant improvement relating to a retail establishment comply with applicable building, health, and safety codes and approve the plans within specified timelines; authorize an architect licensed by the California Architects Board or a professional engineer licensed by the Board for Professional Engineers, Land Surveyors and Geologists to serve as a qualified professional certifier after meeting specified requirements; and provide that making false statements on a certification is cause for disciplinary action by the qualified professional certifier’s respective licensing board. (Status: This bill is pending in the Senate Committee on Judiciary.)
AB 671 (Wicks, Chapter 470, Statutes of 2025) requires a local building or permitting department to allow an applicant to have a qualified professional certifier certify the plans for a restaurant tenant improvement comply with applicable building, health, and safety codes and approve the plans within specified timelines; authorizes an architect licensed by CAB or a professional engineer licensed by BPELSG to serve as a qualified professional certifier after meeting specified requirements; and subjects a qualified professional certifier to disciplinary action for making false statements on a certification by their respective licensing board.
- Arguments in Support. A.O.C. Wine Bar, Café Tropical, California Travel Association, Guelaguetza Restaurant, the Los Angeles Area Chamber of Commerce, Old Growth Hospitality, LLC, Pasjoli Restaurant, SELINE Restaurant, The Chocolate Dispensary, West Valley Warner Center Chamber of Commerce, Whole Cluster Hospitality, LLC, and Woon write, “The permitting process for equipment replacement in restaurants is equally burdensome: even a straightforward like-for-like equipment swap can trigger weeks-long delays and mandatory inspections that cash-strapped operators cannot afford to wait for. Many rules have had the unintended effect of preventing the renovation of older buildings or, when renovations proceed, imposing requirements that work against business survival, social progress, and sustainability objectives. AB 1915 would create a streamlined permitting pathway to allow qualified contractors to [certify] routine equipment installations, modernize California’s food facility codes to reflect realities of how small businesses operate, and cut red tape for small restaurants by amending outdated facility requirements around restrooms, ventilation, and equipment, making it less expensive to open and operate a restaurant.”
Los Angeles County Business Federation writes, “With more than 86,000 restaurant locations statewide and over 1.8 million jobs supported by the industry, restaurants remain among California’s largest private-sector employers.
Unfortunately, many restaurant operators — especially independently owned and small family-run establishments — face significant delays and costs when replacing or upgrading existing kitchen equipment due to inconsistent and lengthy local permitting processes. AB 1915 provides a commonsense solution by creating a more efficient and predictable framework for “like-for-like” restaurant equipment installations while maintaining important health and safety protections.”
Truly Pizza writes in support, “AB 1915 offers thoughtful, common-sense reforms that modernize outdated restaurant regulations while maintaining important health and safety standards. By streamlining permitting, creating flexibility for routine equipment replacements, and updating food facility requirements to better reflect how restaurants operate today, the bill will help independent operators invest more in their businesses and less in unnecessary bureaucracy.”
Valley Industry and Commerce Association writes, “AB 1915 helps restaurants and other food-serving businesses avoid unnecessary delays when replacing existing equipment with similar equipment that does not alter building occupancy, structural elements, fire and life safety systems, or approved utility capacity. By allowing qualified licensed contractors to certify compliance for these limited installations, the bill provides a practical way to reduce downtime, control costs, and help businesses reopen or continue operations more quickly.”
- Arguments in Opposition. California Building Officials writes, “Although “like for like” may seem like a simple change out, in the world of building codes, “like for like” seldom exists – particularly between a changeover in restaurant tenants. The Federal Office of Emergency Management (FEMA) conducted a study relative to restaurant fires and estimated that over 60% of restaurant fires are attributable to cooking equipment. The role of the local building department is to ensure the life-safety of those patrons that dine at restaurants and we take this role very seriously. Hence; our need to inspect equipment changes and ensure the proper adherence to federal, state, and local standards. Contractors conducting the work may be familiar with the application of building codes in construction, but this does not give them fair license to self-certify their own work particularly as a new restaurant welcomes patrons from the community. This responsibility is that of the local building department as the public safety fiduciaries of each local city and county.”
The Contractors State License Board is opposed unless amended, writing, “Under AB 1915, problems that a building inspector would typically identify during inspection(s) may go undetected, potentially creating hazardous conditions to the public and property owner. Safety or quality issues become apparent through building department inspections, and without that safeguard, issues might not emerge until after the contractor has completed and or left the project. CSLB respectfully requests you amend AB 1915 to remove provisions to self-certify that their installation of restaurant equipment complies with building standards and codes in lieu of an inspection by a local building official.” - Comments and Suggested Amendments. While the bill does not prohibit a third-party contractor, this bill does not require the certifier to be a separate contractor. CSLB raised concerns that this bill does not make clear that the person conducting the certification is a third party and proposed amendments to specify the contractor certifying that the work complies with all building codes is not the same contractor who performed the installation. The reluctance to accept clarifying amendments implies the intent of this bill is to allow self-certification, although that is not stated by the language. Self-certification would essentially exempt contractors from inspections so long as they have five years of experience and liability insurance, which raises the following concern: Is the person who performs the installation the same person who demonstrated knowledge of the building codes in order to get the contractor’s license?
CSLB ensures applicants for a contractor’s license have met minimum standards for licensure. To become licensed, a contractor must employ a qualifying individual with the knowledge of building laws of the state and administrative principles of the contracting business as demonstrated by passing a law and ethics examination, among other requirements. However, the qualifying individual who demonstrated knowledge of the building codes to obtain the license may not be the person who installed the equipment. Should an employee whose knowledge base is unknown be allowed to certify that their work complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation simply because their employer carries insurance and has the requisite experience? The Author may wish to consider amending the bill to require a third-party certifier to be the person who qualified the contractor’s license. This would ensure the individual signing the affidavit has demonstrated their knowledge of the building codes at a level sufficient to become licensed.
Is self-certification safe for the public? Following the building codes is a central tenet and primary requirement of the contracting profession. Despite this fact, the CSLB 2024 Sunset Report states the second most common violation found on a citation issued to a licensee during the four-year reporting period was willful departure from workmanship standards (BPC § 7109(a)) with 985 citations issued. Additionally, willful or deliberate violation of building laws of this state (BPC § 7110) was the fifth most common with 579 citations. Workmanship and following the building codes are germane to concerns about a contractor checking their own work. Even more striking, these violations are “willful,” indicating violations that could not be proven to be intentional are not accounted for in these data.
Does a contractor in any license classification have the knowledge to certify an installation? This bill states a qualified licensed contractor certifier “Holds a valid license in good standing in the appropriate classification for the work performed,” but is the appropriate classification required to perform the installation or is it meant to certify all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation are complied with?
CSLB issues licenses in 44 distinct classifications. A contractor may be licensed as a C-10 Electrical Contractor, but does that make them qualified to certify that an installation meets plumbing or fire codes? Is a C-36 Plumbing Contractor qualified to certify that an installation meets general building codes? Perhaps, but moving forward, the Author may wish to elaborate on what is meant by “appropriate classification”.
Should this bill be amended to prevent fraud or workmanship issues? The Author and CSLB have agreed on amendments to clarify that the qualified licensed contractor certifier is not the same person who performed the installation and that the certifier is not affiliated with the contractor.
Amend GC § 66360 as follows:
(a) “Qualified licensed contractor certifier” means a licensed commercial contractor who satisfies all the following:
(1) Does not contract for or perform initial installation of like-for-like commercial restaurant equipment they are certifying.
(2) Is unaffiliated with the contractor performing the like-for-like commercial restaurant equipment installation.
(3) (1) Holds a valid license in good standing in the appropriate classification for the work performed.
(4) (2) Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
(5) (3) Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
(6) (4) Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
SUPPORT AND OPPOSITION:
Support:
Bub and Grandma's
Cafe Tropical Group LLC
California Travel Association
Greater San Fernando Valley Chamber of Commerce
Guelaguetza Restaurant
Jolie Limited Partnership
Los Angeles Area Chamber of Commerce
Los Angeles County Business Federation
Old Growth Hospitality, LLC
The Chocolate Dispensary
The Lucques Group
Truly Pizza
Valley Industry and Commerce Association
West Valley Warner Center Chamber of Commerce
Whole Cluster Hospitality
Woon
Opposition:
California Building Officials
Contractors State License Board
-- END --
Data from Department of Consumer Affairs 2024-25 Annual Report. ↑
SENATE COMMITTEE ON HOUSING
Senator Jesse Arreguín, Chair
2025 - 2026 Regular
Bill No: AB 1915 Hearing Date: 6/24/2026
Author: | Gabriel | ||
Version: | 3/23/2026 Amended | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | Ryan Hardmeyer | ||
SUBJECT: Accelerated restaurant equipment permitting approval: retail food safety
DIGEST: This bill: 1) establishes a streamlined approval process for a local permit for a like-for-like restaurant equipment installation; and, 2) requires the California Building Standards Commission (CBSC), as part of its next triennial update of the Building Standards Code, to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers.
ANALYSIS:
Existing law:
- Establishes the CBSC within the Government Operations Agency and requires CBSC to receive proposed building standards from state agencies for consideration in on a 3-year code adoption cycle, with procedures that ensure adequate public participation, notice and justification, technical review, and opportunities for advisory input before adoption by CBSC.
- Authorizes local governments to enact ordinances or regulations that make building standards amendments to the Building Standards Code, as specified.
- Authorizes the legislative body of any county or city to adopt ordinances that regulate the use of buildings, structures, and land as between industry, business, residences, and open space, including agriculture, recreation, enjoyment of scenic beauty, use of natural resources, and other purposes.
- Establishes a streamlined approval process for a local permit for a tenant improvement relating to a restaurant, as defined.
- Provides for the licensure and regulation of contractors by the Contractors State License Board. Specifies willful or deliberate disregard by a licensed contractor of various state building, labor, and safety laws constitutes a cause for disciplinary action by the board.
- Establishes uniform health and sanitation standards for retail food facilities. Local health agencies are primarily responsible for enforcing these standards. A person who violates any provision of the California Retail Food Code is guilty of a misdemeanor, except as otherwise provided.
This bill:
Related to licensed contractors and like-for-like permits:
- Provides that a false statement made in a certification, as specified, constitutes grounds for disciplinary action by the Contractors State License Board.
- Defines “licensed commercial contractor” to mean a contractor holding a valid and active license in good standing in the appropriate classification for the work performed, as specified.
- Defines “like-for-like equipment installation” to mean the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
- Change the use or occupancy classification of the building.
- Alter structural or load-bearing elements.
- Modify fire or life safety systems, except for direct connection to existing approved systems.
- Increase approved utility capacity.
- Require discretionary review.
- Defines “qualified licensed contractor certifier” to mean a licensed commercial contractor who satisfies all the following:
- Holds a valid license in good standing in the appropriate classification for the work performed.
- Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
- Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence.
- Is not subject to any current suspension, probation, or enforcement action by the Contractors State License Board.
- Requires a local building department, upon request of an applicant for a permit for a like-for-like equipment installation within a restaurant, to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
- Provides a certification submitted pursuant to this bill shall satisfy the inspection requirement for the qualifying installation and shall be at the applicant’s expense and shall not exempt the project from permit requirements.
- Provides a qualified licensed contractor certifier shall submit an affidavit, under penalty of perjury, attesting to both of the following:
- The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
- The work performed is limited to a like-for-like equipment installation.
- Requires a local building department to approve or deny a complete permit application, consistent with 5), within 10 business days of receipt. If the local building department does not approve or deny the application within the specified timeframe, the permit shall be deemed approved, provided all required fees have been paid.
- Provides a qualified licensed contractor certifier shall be liable for damages arising from negligent or false certification, as specified.
- Provides a city, county, or city and county shall adopt reasonable administrative requirements to implement this chapter.
Related to building standards for business establishments:
- Requires the CBSC, as a part of the next triennial update of the Building Standards Code that occurs on or after January 1, 2027, to adopt building standards that do all the following:
- Authorizes a business establishment that is takeout only to operate without providing customer restrooms.
- Authorizes a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
- Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
- Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
- Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
- Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood, as described, over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor.
- Authorizes a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
Related to health and safety requirements:
- Defines “noncontinuous cooking,” also known as “par-cooking,” to mean the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service. Clarifies it does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
- Defines “warm water” as water that is supplied through a mixing valve or combination faucet at a temperature of at least 85ºF but not greater than 108ºF.
- Prohibits a steam valve from being used at a handwashing sink.
- Requires a self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet.
- Requires raw animal foods that are cooked using a noncontinuous cooking process to be all of the following, as specified.
- Changes “thermometer” to “temperature measuring device.”
- Prescribes certain conditions for which a grease trap is not required in a certain location or with certain levels of accessibility.
- Dictates size and placement requirements for passthrough window service openings, as specified.
- Provides that certain requirements for temporary food facilities are not required, if flying insects, vermin, birds, other pests, and environmental factors, including, but not limited to, precipitation and wind that could contaminate the food, are absent due to the location of the facility or other limiting conditions.
Background
The Building Standards Process. The California Building Standards Law establishes the process for adopting state building standards by the CBSC. Statewide building standards are intended to provide uniformity in building across the state. The CBSC’s duties include the following: receiving proposed building standards from state agencies for consideration in each triennial and intervening building code adoption cycle; reviewing and approving building standards submitted by state agencies; adopting building standards for state buildings where no other state agency is authorized by law; and publishing the approved building standards in the California Building Standards Code.
Most building standards currently in use in California are developed and vetted at the national level every three years by technical organizations, academics, and trade associations that develop consensus standards, which are then incorporated into the International Building Code (IBC), the national model code used by most U.S. jurisdictions. At the state level, agencies with jurisdictional authority then review the IBC and amend as necessary for California’s specific needs, e.g.,:
- Office of State Fire Marshall is responsible for the development of building standards that provide for fire and life safety within residential buildings, such as means of egress, fire alarm systems, and fire extinguishing systems.
- Department of Housing and Community Development (HCD) is responsible for the development of residential building standards, such as those in single-family and multifamily dwellings, as well as dormitories, hotels, motels, and accessibility in privately funded multifamily dwellings.
- Division of the State Architect is responsible for the development of building standards to promote structural safety and accessibility in public schools, essential service buildings, commercial facilities, and public housing.
After the proposal of building standards by state agencies, the proposals undergo a public vetting process. A code advisory committee composed of experts in a particular scope of code reviews the proposed standards, followed by public review. The proposing agency considers feedback and may then amend the standards and re-submit them to the CBSC for consideration. CBSC reviews and adopts the standards and files them with the Secretary of State for codification and publishing, and there is an 180-day period during which local agencies file modifications and changes to the state codes. The new codes then take effect January 1st of the subsequent year following publication.
Updates and changes to building standards are adopted on two timelines: through the triennial code adoption cycle which occurs every three years, and through the intervening code adoption cycle which provides an update to codes 18 months after the publication of the triennial codes. Regulatory activities for each cycle begin over two years before the effective date of the codes.
Comments
- Author’s statement. "California's neighborhood restaurants are the heart of our communities, yet so many are fighting just to survive. AB 1915 is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, our communities are stronger for it."
- Requiring vs. proposing building standards for adoption. As a matter of practice, the Legislature typically offers guidelines or directs agencies to consider certain standards, rather than requiring the adoption of specific standards, in order to provide flexibility and allow for subject matter experts to determine suitability and weigh the many considerations that must be evaluated when recommending new or modified building standards.
This bill would require the CBSC to adopt a variety of building standards for restaurants. While the proposed standards seem straightforward and reasonable to ease burdens on business owners without jeopardizing health and safety or harming patrons, it may be worth considering whether the bill instead instructs the CBSC to consider the proposed standards.
- Like-for-like permitting. Another provision of the bill requires local building departments, upon request of an applicant for a permit for a like-for-like equipment installation within a restaurant, to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes. This is intended to speed up the approval process for like-for-like permits, while ensuring safeguards are in place to ensure proper reviews are not forfeited. This could accomplish the author’s intent of easing stressors on the commercial business industry, including restaurants.
- Seeing double. This committee previously heard a substantially similar bill, AB 2550 (Gabriel, 2024). That bill contained similar provisions to ease building standards for certain restaurant establishments. This bill differs in that it also provides a like-for-like permitting process intended to speed up approval timelines for restaurants that apply for equipment installations. AB 2550 was held on suspense in the Senate Appropriations Committee.
- Opposition. The Contractors State License Board (CSLB) wrote in opposition with concern over allowing contractors to self-certify their installation of restaurant equipment and bypass review from local building inspectors. They anticipate a much greater workload due to a potential influx of complaints related to negligent or false self-certifications.
- Triple-referral. This bill will first be heard in the Senate Health Committee, which has jurisdiction over the bill’s health and safety provisions in commercial establishments, on June 17th. Should this bill pass out of that committee, it will next be heard by this committee due to its inclusion of provisions related to local building departments, as well as considerations for the CBSC. Should this bill pass out of this committee, this bill will be heard in the Senate Business and Professions Committee, which has jurisdiction over the bill’s provisions related to the Business & Professions Code, including licensure requirements.
Related/Prior Legislation
AB 2550 (Gabriel, 2024) — would have eased a set of building standards for restaurants that meet certain conditions, among other provisions not within this committee’s jurisdiction. This bill was held on suspense in Senate Appropriations.
FISCAL EFFECT: Appropriation: Fiscal Com.: Local:
POSITIONS: (Communicated to the committee before noon on Wednesday,
June 17th, 2026.)
SUPPORT:
Bub and Grandma's
Cafe Tropical Group LLC
California Chamber of Commerce
California Restaurant Association
California Travel Association (CALTRAVEL)
Greater San Fernando Valley Chamber of Commerce
Los Angeles County Business Federation (BIZ-FED)
Old Growth Hospitality, LLC
The Chocolate Dispensary
The Lucques Group
Truly Pizza
Valley Industry and Commerce Association (VICA)
West Valley Warner Center Chamber of Commerce
Whole Cluster Hospitality
Woon
OPPOSITION:
Contractors State License Board
-- END --
SENATE COMMITTEE ON HEALTH
Senator Akilah Weber Pierson, Chair
BILL NO: AB 1915
AUTHOR: | Gabriel and Wicks | ||
VERSION: | March 23, 2026 | ||
HEARING DATE: | June 17, 2026 | ||
CONSULTANT: | Vincent D. Marchand | ||
SUBJECT: Accelerated restaurant equipment permitting approval: retail food safety
SUMMARY:
Makes various changes to the California Retail Food Code, including establishing requirements for “par cooking” raw animal foods, revising grease trap requirements, and revising passthrough window requirements. Requires the Building Standards Commission, as part of its next triennial update, to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers. Establishes an accelerated local permitting process for like-for-like equipment installations in restaurants.
Existing law:
- Establishes the California Retail Food Code (CalCode) to provide for the regulation of retail food facilities. Health and sanitation standards are established at the state level through the CalCode, while enforcement is charged to local agencies, carried out by the 58 county environmental health departments, and four city environmental health departments (Berkeley, Long Beach, Pasadena, and Vernon). [HSC §113700, et seq.]
- Requires primary responsibility for the enforcement of the CalCode to be with the local enforcement agency, but provides that nothing prevents the California Department of Public Health (CDPH) from taking any necessary program or enforcement actions for the protection of public health and safety. Requires CDPH to provide technical assistance, training, standardization, program evaluation, and other services to local health agencies as necessary to ensure the uniform interpretation and application of the CalCode, when an appropriation is made for this purpose. [HSC §113713]
- Requires any construction, alteration, remodeling, or operation of a food facility to be approved by the local enforcement agency, and to be in accordance with all applicable local, state, and federal statutes, regulations, and ordinances, including fire, building, and zoning codes. [HSC §113715]
- Defines a “food facility” as an operation that stores, prepares, packages, serves, vends, or otherwise provides food for human consumption at the retail level. Excludes various entities from the definition of a “food facility,” including a cottage food operation, and a church, private club, or other nonprofit association that gives or sells food to its members and guests, and not to the general public, at an event that occurs no more than three days in any 90-day period. [HSC §113789]
- Requires food facilities to provide clean toilet rooms in good repair and conveniently located and accessible for use by employees during all hours of operation. Requires the number of toilet facilities to be in accordance with applicable local building and plumbing ordinances. [HSC §114250]
- Requires a food facility to provide clean toilet facilities in good repair for guests, consumers, or invitees when there is onsite consumption of food or when the food facility was constructed after July 1, 1984, and has more than 20,000 square feet of floor space. Requires a building with more than 20,000 square feet of floor space to provide at least one separate toilet facility for men and one separate toilet facility for women. Permits any city or county to enact ordinances that are more restrictive than these requirements. [HSC §114276]
- Provides that food facilities located within amusement parks, stadiums, arenas, food courts, fairgrounds, and similar premises are not required to provide toilet facilities for employee use within each food facility if approved toilet facilities are located within 200 feet of each food facility and are readily available for use by employees, as specified. [HSC §114250.1]
- Establishes the California Building Standards Law and California Building Standards Commission (BSC), and requires any building standard adopted or proposed by state agencies to be submitted to, and approved or adopted by, the BSC prior to codification. [HSC 18901 et seq. and §18930]
- Requires building standards adopted by state agencies and submitted to the BSC for approval to be accompanied by an analysis written by the adopting agency or state agency that proposes the standards, and requires this analysis to justify the approval, to the satisfaction of the BSC, by the following criteria:
- The proposed building standards do not conflict with, overlap, or duplicate other building standards;
- The proposed building standard is within the parameters established by enabling legislation and is not expressly within the exclusive jurisdiction of another agency;
- The public interest, as specified, requires the adoption of the building standards;
- The proposed building standard is not unreasonable, arbitrary, unfair, or capricious;
- The cost to the public is reasonable, based on the overall benefit to be derived from the building standards;
- The proposed building standard is not unnecessarily ambitious or vague;
- The applicable national specifications, published standards, and model codes have been incorporated, where appropriate;
- The format of the proposed building standards is consistent with that adopted by the BSC; and,
- The proposed building standard, if it promotes fire and panic safety, as determined by the State Fire Marshal, has the written approval of the State Fire Marshal. [HSC §18930]
This bill:
- Requires the BSC, as part of the next triennial update of the California Building Standards Code that occurs beginning January 1, 2027, to adopt building standards that:
- Permit a business establishment that is takeout-only to operate without providing customer restrooms;
- Permit a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons, to provide restrooms without urinals;
- Permit a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms;
- Permit a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders;
- Permit a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains;
- Authorize a business establishment to operate cooking equipment without installing a Type 1 hood, as defined, over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor; and,
- Permit a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
- Defines “noncontinuous cooking,” also known as “par-cooking,” as the cooking of food in a facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service. Excludes from this definition cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
- Requires raw animal foods that are cooked using a noncontinuous process, as defined in this bill, to be subject to all of the following requirements:
- By subject to an initial heating process that is no longer than 60 minutes in duration;
- Immediately after initial heating, cooled according to the time and temperature requirements for cooked potentially hazardous foods, as specified in existing law;
- After cooling, held frozen or cold, as specified under existing law for potentially hazardous foods;
- Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under existing law requirements for raw animal foods;
- Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods if not either hot held, as specified, served immediately, or held using time as a public health control, as specified, after complete cooking; and,
- Prepared and stored according to written procedures that meet all of the following conditions:
- Are maintained in the food facility and are available to the enforcement agency upon request;
- Describe how the requirements specified in this bill are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met;
- Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be further cooked as required by this bill prior to being offered for sale or service; and,
- Describe how the foods, after initial heating but prior to final cooking, are to be separated from ready-to-eat foods.
- Revises requirements pertaining to grease traps and grease interceptors at retail food facilities, which are currently prohibited from being located in a food or utensil handling area unless specifically approved by enforcement agency, to instead permit an aboveground grease trap installed under a three-compartment sink under the following conditions:
- A structural hardship can be determined preventing the grease trap from being installed in an area not designated for food preparation or storage or a utensil handling area;
- The site can provide a cleaning or maintenance plan that indicates how and when this grease trap will be accessed for service to prevent cross contamination of food or food contact surfaces; and,
- The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
- Revises the requirement for “pass-through window service openings” in retail food facilities, which are currently limited to being no more than 216 square inches and must be equipped with a self-closing device, or can be up to 432 square inches if equipped with an air curtain device, by allowing a window to be closed when not in use rather than having a self-closing device, and by permitting a pass-through window that is larger than 432 square inches if at a drive-through and it is equipped with both a self-closing device and an air curtain device.
- Revises the list of exemptions from a requirement that the walls and ceilings of all rooms in a retail food facility to be of a durable, smooth, nonabsorbent, and easily cleanable surface, which currently exempts bar areas where alcoholic beverages are sold, to apply this exemption to areas where any beverages are sold, served, or dispensed.
- Makes other minor, technical changes to provisions of law governing retail food facilities.
- Establishes a process to accelerate and streamline the local permitting process for “like-for-like” restaurant equipment installations, defined as the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility to existing approved equipment and does not change or modify things like structural elements or life safety systems. Limits this process to restaurants that are not fast food restaurants, which are defined in existing law as a limited-service restaurant that is part of a national fast food chain.
- Requires a local building department, under the accelerated like-for-like permitting process, to allow a qualified licensed contractor who meets specified requirements to be a “certifier,” including having at least five years of relevant experience and at least $2 million in general liability insurance, to submit a certification of compliance with applicable codes. Requires this certification to satisfy the inspection requirement for the qualifying installation.
- Specifies that the certification does not exempt the project from permit requirements, and requires the licensed contractor certifier to submit an affidavit, under penalty of perjury, attesting that the equipment installation complies with all applicable codes, and the work is limited to like-for-like equipment installation.
- Requires a local building department to approve or deny a complete permit application under the accelerated like-for-like permitting process within 10 business days of receipt, and if the building department does not approve or deny the application within the 10 days, requires the permit to be deemed approved provided all required fees have been paid.
- Provides that a false statement made by a licensed commercial contractor as part of the certification submitted under the accelerated local permitting process for like-for-like restaurant equipment installations, constitutes grounds for disciplinary action by the Contractors State License Board (CSLB).
- Requires the licensed contractor certifier to be liable for damages arising from negligent or false certification, and requires the applicant to indemnify the local agency from property damage or personal injury arising from construction performed under the accelerated permitting process.
- Requires a city or county to adopt reasonable administrative requirements to implement the like-for-like permitting process.
FISCAL EFFECT:
According to the Assembly Appropriations Committee, BSC would need to hire a two-year limited-term associate architect to research, develop, and propose the subject standards. BSC estimates costs of $296,000 in fiscal year (FY) 2029-30 and $306,000 in FY 2030-31 (Building Standards Administration Special Revolving Fund and Department of General Services Service Revolving Fund). BSC explains this bill will also have an unknown fiscal impact to the State Fire Marshal, Department of Health Care Access and Information (HCAI), Division of the State Architect, Energy Commission, and other agencies through its effects on the funds cited. Costs of an unknown but potentially significant amount to the CSLB, which expects this bill will increase complaints from local building departments, other agencies, and consumers regarding negligent or false certifications of compliance with building codes (Contractors License Fund). CSLB notes such cases require the same level of investigative work as other disciplinary matters, including reviewing certification packets submitted by local agencies, coordinating with local building departments to verify permit timelines, and determining whether misrepresentation or false statements warrant disciplinary action. CSLB states it will need an additional position for every additional 53 complaints per year. Costs of an unknown but likely absorbable amount to CDPH. The California Conference of Directors of Environmental Health anticipates no costs to local environmental health agencies.
PRIOR VOTES:
Assembly Floor: | 79 - 0 |
Assembly Appropriations Committee: | 15 - 0 |
Assembly Business and Professions Committee | 18 - 0 |
Assembly Health Committee: | 16 - 0 |
COMMENTS:
- Author’s statement. According to the author, California's neighborhood restaurants are the heart of our communities, yet so many are fighting just to survive. This bill is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, our communities are stronger for it.
- Background on process for adopting building standards. The California Building Standards Code is published on a triennial basis in Title 24 of the California Code of Regulations. There are also interim updates at 18 months between triennial cycles. According to the BSC, they are currently in the 2024 cycle of the triennial edition, which will be published as the 2025 edition of Title 24. Amendments to California’s building standards are subject to a lengthy and transparent public participation process throughout each code adoption cycle. Through this process, relevant state agencies propose amendments to building codes, which the BSC must then adopt, modify, or reject. The BSC is the “originating agency,” or the state agency responsible for proposing building standards, for only certain types of building codes, such as “green building standards” for nonresidential buildings, state buildings, and state university buildings. Some building standards are statutorily assigned to other departments, such as the HCAI as the responsible state agency for proposing hospital and clinic building standards. Where there is no state agency that is specifically designated as the responsible state agency to make alternative building standards proposals, the BSC adopts national model codes. The CalCode, which governs restaurants, includes some specific building specifications, including types of handwashing requirements, what surfaces are required to be made of, cooking vent hood requirements etc. Where there are not specific requirements in CalCode, whatever building standards have been adopted, which are often model codes, would be applied to the restaurant construction project.
- Restroom and drinking fountain requirements. Most of the changes to building standards that this bill is requiring the BSC to adopt, relating to restroom requirements and drinking fountains, are in the California Plumbing Code, and are based on model codes but with some BSC-adopted modifications. Requirements are specific to building types, and for purposes of this bill, the occupancy category is for “restaurants, pubs, lounges, nightclubs and banquet halls.” The code includes a chart showing the number of water closets, urinals, lavatories, and drinking fountain fixtures per person. For water closets (toilets) for men, there needs to be one toilet for men up to 50 people, two toilets for between 51 and 150 people, three for up to 300, and it goes up from there. For women, one toilet is required for up to 25 people, two for 26 to 50, three for 51 to 100, four for 101 to 200, and it goes up from there. One urinal is required for men for up to 200 people, and two for 201 to 300, and it goes up from there. At least one drinking fountain is required for the first 250 people, two for between 251 and 500, and it goes up from there. Building codes generally only apply going forward, so buildings constructed before a requirement was added to a code can continue operating without that requirement, unless otherwise required.
- Author’s explanation for the building code changes in this bill. With regard to the building code changes proposed by this bill, the author provided the following explanations:
- Eliminating customer restroom requirement for takeout-only operations. The author states that customers are not lingering on premises at takeout-only operations. Eliminating the requirement for takeout-only restaurants to provide a customer restroom reduces buildout costs dramatically, lowering the barrier to entry for entrepreneurs and allowing them to operate in smaller, more affordable spaces.
- Authorizing a business with up to 49 people to provide restrooms without urinals. The author states that urinals require additional plumbing rough-in, wall space, and installation cost, and that for restaurants with a maximum occupancy of 49 people, the volume of restroom use is low enough that a standard toilet-only restroom adequately services the population.
- Authorizing a business to install up to 1,000 square feet of patio seating without providing additional restrooms. The author states that outdoor dining has become essential to the viability of restaurants and cafes, but adding square footage even outdoors can trigger costly restroom expansion requirements under building codes. Outdoor patrons have access to the indoor restrooms, and the 1,000 square foot cap limits the additional patron load to a range that existing restroom capacity can reasonably provide.
- Authorizes a business that serves alcohol to satisfy restroom requirements with restrooms that can be used by all genders. The author states that traditional codes often require separate sex-designated restrooms, which effectively double the plumbing and square footage needed, which is especially impactful in urban markets where square footage is extremely expensive.
- Authorizes a business with a maximum occupancy of 100 people to operate without drinking fountains. The author states that the cost of drinking fountain installation is a disproportionate cost relative to the benefit, since water is already included as a part of a restaurant’s normal service.
- Explanation for retail food code changes. The most significant change to the CalCode by this bill is establishing regulatory parameters for “par cooking,” or non-continuous cooking of raw animal foods. The author notes that par cooking is a common food practice, especially in large hotel and catering operations. Because it is not defined in state law, however, jurisdictions have not been consistent in allowing the practice. This language already existed in the national Model Food Code that the CalCode is based on, and so this is just adopting the par cooking requirements from the Model Food Code. Other changes, including the grease trap requirements, pass-through windows, modifications to handwashing sinks, and others, are all relatively minor and technical modifications that have been agreed to between the restaurant industry and the local environmental health directors.
- Triple referral. This bill is triple referred. Should it pass out of this Committee, it will be referred to the Senate Committee on Housing, followed by the Senate Committee on Business, Professions, and Economic Development.
- Related legislation. SB 918 (Seyarto) revises the requirements for “passthrough window service openings” of a restaurant, by allowing local enforcement agencies to approve larger passthrough openings if the passthrough window opening is equipped with both a self-closing device and an air curtain device. SB 918 is very similar to one of the provisions of this bill. SB 918 is pending in the Assembly Appropriations Committee.
- Prior legislation. AB 671 (Wicks and Gabriel, Chapter 470, Statutes of 2025) establishes an accelerated planning process for non-fast food restaurants that require a local building department to allow an applicant to have a qualified professional certifier certify that the plans for a tenant improvement relating to the restaurant’s interior comply with applicable building, health, and safety codes. AB 671 specifies that certification under this process does not exempt a tenant improvement from other mandatory construction inspections, including various code inspections conducted during or after construction.
AB 1470 (Haney of 2025) would have modifying requirements pertaining to grease traps and pass-through windows in restaurants, and additionally exempted permanent outdoor dining structures from the California Environmental Quality Act and the California Coastal Commission. AB 1470 was held on the Senate Appropriations Committee suspense file.
AB 2550 (Gabriel of 2024) contained some of the same provisions of this bill, including the requirement that the BSC adopt building standards to permit restaurants to have more flexibility with restroom and drinking fountain requirements and other buildings standards, and the modifications pertaining to grease traps and pass-through windows in restaurants. AB 2550 was held on the Senate Appropriations Committee suspense file.
SB 1194 (Allen, Chapter 839, Statutes of 2022) permits a local government to require, by ordinance or resolution, that multi-stall public restroom facilities within its jurisdiction be designed, constructed, and identified for use by all genders.
AB 1632 (Weber, Chapter 893, Statutes of 2022) requires a place of business that has a toilet facility for its employees to allow an individual who is lawfully on the premises to use that toilet facility during normal business hours if the individual has an eligible medical condition or uses an ostomy device, and if specified conditions are met.
AB 1732 (Ting, Chapter 818, Statutes of 2016) requires all single-user toilet facilities in any business establishment, place of public accommodation, or government agency to be identified as all-gender toilet facilities, as specified.
- Support. This bill is sponsored by the Independent Hospitality Coalition (IHC), which states that this bill reduces barriers to entry, lowers the costs of doing business, and creates more opportunities for California’s small business community to thrive. IHC notes that prior to the pandemic, the restaurant and food service sector employed approximately 400,000 to 500,000 workers in the Greater Los Angeles region alone, yet today, the industry is facing sustained economic pressure. Across the United States, more than 72,000 restaurants closed in 2024, and restaurant bankruptcies reached their highest levels since the pandemic. According to the National Restaurant Association, 42% of operators reported that they were not profitable in 2025. In this environment, reducing the cost of opening and operating a business is not just helpful, it is essential. This bill represents a practical, consensus-driven solution, and is the result of ongoing collaboration between small business stakeholders, industry professionals, and public health regulators to identify areas where outdated or duplicative requirements can be modernized without compromising safety. The California Restaurant Association (CRA) makes similar arguments in support, and states that even a like-for-like equipment swap can trigger weeks-long delays and mandatory inspections that cash-strapped operators cannot afford to wait or pay for. CRA does request an amendment to remove the limitation on the like-for-like accelerated permitting process that prevents fast food restaurants from being able to participate.
- Oppose unless amended. The CSLB opposes this bill unless amended, stating that the permitting process provides essential oversight designed to protect the public and business owners from harm by requiring a contractor to comply with established building code requirements and resolve any non-compliant work before the final permit is approved. CSLB states that under this bill, problems that a building inspector would typically identify during inspections may go undetected, potentially creating hazardous conditions to the public and property owner. CSLB states that this bill diverts responsibility for code and trade-standard compliance from building departments to CSLB by allowing contractors to bypass inspection by local building officials. Restaurant owners who encounter subpar construction work will undoubtedly seek resolution by filing complaints with CSLB. CSLB anticipates a substantial increase in complaints from restaurant owners and local building departments, regarding negligent or false certifications resulting from this bill. CSLB is requesting that the provisions allowing contractors to self-certify that their installation of restaurant equipment complies with building standards in lieu of an inspection by a local building official be amended out of the bill.
- Policy comment. According to the BSC, they only have original jurisdiction, and therefore the ability to propose building standards, for certain types of buildings, and restaurants are not among them. Therefore, rather than require the BSC to adopt the building requirements as proposed in this bill, normally the department with jurisdiction over the building type would be assigned the responsibility for proposing these changes, which would then be submitted to BSC for approval and adoption. The challenge is that although retail food facilities fall under the overall jurisdiction of CDPH, local agencies are the primary enforcement entities, and to the extent there are specific building requirements for restaurants, they are spelled out in the CalCode. The California Conference of Directors of Environmental Health (CCDEH), which is the association of local enforcement agencies, has a Food Safety Policy Committee that works with various stakeholders, including the restaurant industry, to develop recommendations on amendments to the CalCode, which CCDEH would then seek legislation to implement. However, most of the changes that this bill is requiring the BSC to adopt are not requirements in the CalCode, but are requirements in the plumbing code that are typically derived from national model codes. To change these specifically for a type of establishment, such as restaurants, the BSC would typically look to the responsible department to propose standards. In this case, the closest department is CDPH, but as described above, CDPH typically has very little involvement in restaurant building requirements, deferring to CCDEH. The author may wish to consider requiring CDPH, after receiving input from local environmental enforcement agencies, to propose these changes to the BSC.
SUPPORT AND OPPOSITION:
Support: Independent Hospitality Coalition (sponsor)
Betsy Restaurant
Burger She Wrote
California Association of Environmental Health Administrators
California Community Foundation
California Restaurant Association
California Travel Association
California Association for Micro Enterprise Opportunity
Central City Association of Los Angeles
Chick-fil-a
Civil Coffee
Council of Infill Builders
Day by Day Hospitality
Ferrazzanis
Golden Gate Restaurant Association
Inclusive Action for the City
Last Word Hospitality
Latino Restaurant Association
Little Tokyo Service Center
Truly Pizza
Venice Chamber of Commerce
Westside Council of Chambers of Commerce
Oppose: California Contractors State License Board (unless amended)
-- END --
ASSEMBLY THIRD READING
ATR Bill Id:AB 1915
Author:(Gabriel and Wicks)
As Amended Ver:March 23, 2026
Majority vote
SUMMARY
Makes various changes to the California Retail Food Code (CRFC) related to milk, non-continuous cooking, raw animal foods, handwashing sinks, refrigeration, grease traps and grease incinerators, and passthrough windows. Requires the Building Standards Commission (BSC) as part of its next triennial update to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers. Establishes a streamlined approval process for a local permit for a like-for-like equipment installation (the installation or replacement of substantially similar existing approved equipment) for restaurants.
Major Provisions
COMMENTS
CRFC. The CRFC is modeled after the federal Food and Drug Administration's (FDA) Model Food Code (MFC), which is updated every four years to enhance food safety laws based on the best available science. Between each four-year period, the FDA makes available a Food Code Supplement that updates, modifies, or clarifies certain provisions. The Food Code assists food control jurisdictions at all levels of government by providing them with a scientifically sound technical and legal basis for regulating the retail and food service segment of the industry, such as restaurants, grocery stores, and institutions like nursing homes. Forty-eight states and territories have adopted food codes patterned after the MFC, representing 80% of the United States' population.
The CRFC is primarily enforced by 62 local environmental health regulatory agencies. The State Department of Public Health’s Food and Drug Branch plays a supporting role in the enforcement of the CRFC by providing technical expertise to evaluate processes and procedures and to answer technical and legal inquires for local agencies, industry and consumers.
Restaurant businesses. In their 2025 article titled "Los Angeles restaurants thought it couldn’t get any worse. Then 2025 happened," the Los Angeles (L.A.) Times reported that last year restaurateurs said that the state of the hospitality industry was untenable due to the loss of business from the entertainment-industry strikes, cost-of-labor increases, and repayment of COVID-era back rent and loans. In 2025 fires, Immigration and Customs Enforcement raids, neighborhood curfews, and tariffs added to the strain on L.A. restaurants. In a new industry survey, 84.8% of L.A. restaurants said business decreased in 2025.
Various changes to CRFC. This bill makes various changes to the CRFC related to the handling of milk, non-continuous cooking, raw animal foods, refrigeration, grease traps and grease incinerators, passthrough windows, and warm water at handwashing sinks. Some of the changes in this bill are substantially similar to provisions of the FDA's 2022 MFC, which is the most recent version.
- Milk Products. Under the CRFC, "handling" of milk or milk products is excluded from the definition of limited food preparation. The author states this means, for example, coffee carts are not technically allowed to serve milk although such handling is happening safely throughout California. Authorizing the handling of milk products under this bill would codify this practice.
- Non-Continuous Cooking. Non-continuous (or "par") cooking is a common food practice, especially in large hotel and catering operations. The author notes that because it is not defined in the CRFC, jurisdictions were not consistent in allowing the practice. The definition established in this bill is identical to the one within the FMC.
- Raw Animal Foods. Non-continuous cooking of raw animal foods is a process in which these foods are partially cooked, cooled, stored, and later finished to reach the required safe internal temperature in more than one heating step rather than in a single continuous cooking session. Some jurisdictions allow this practice, while others do not, as non-continuous cooking is not defined in the CRFC. This bill establishes a framework for the non-continuous cooking of raw animal foods within the CRFC and references several requirements for the cooking of potentially hazardous foods. This framework is substantially to the process for non-continuous cooking of raw animal foods within the MFC.
- Grease Traps and Grease Incinerators. This bill authorizes a grease trap or grease interceptor to be located in a food preparation or utensil handling area if specified conditions are met, including if the site can provide a plan and procedures to keep food surfaces clean and prevent cross-contamination. The author’s intent is to provide flexibility to restaurants while maintaining public health.
- Passthrough Windows. Currently, passthrough window service openings are limited to no more than 216 square inches, or up to 432 inches if equipped with an air curtain device. This bill gives flexibility to passthrough window service openings up to 432 inches to be either an air curtain device or self-closing device. Further, this bill authorizes larger passthrough window service openings but requires these windows to be equipped with both an air curtain device or self-closing device in order to protect public health (keeping the windows closed to prevent contamination of food).
- Warm Water. The changes in this bill relating to warm water and handwashing sinks align with the MFC which requires that handwashing sinks should be equipped to provide water at a temperature of at least 85 through a mixing valve or combination faucet and prohibits the use of a steam mixing valve.
Building Standards Code Adoption Process. The BSC is charged, in part, with the following tasks: administering California's building code adoption process; reviewing and approving building standards proposed and adopted by state agencies; codifying and publishing approved building standards in the California Building Code; and resolving conflict, duplication, and overlap in building standards. BSC's authority and expertise to develop and propose building standards (or, its "original jurisdiction") is limited to the following nonresidential occupancy types and subject areas:
- Specified state buildings as well as buildings constructed by the Trustees of the California State University (CSU) and the Regents of the University of California (UC).
- Seismic retrofit standards for state buildings including those owned by the UC and CSU.
- Standards for parking lot lighting systems for the UC, CSU, and California Community Colleges.
- Green building standards for nonresidential occupancy types for which no other state agency has authority.
Several other state agencies are tasked with developing building standards for various building occupancies and building uses. For example, the Office of Statewide Health Planning and Development does this for hospitals and clinics (among other facilities) and The State Department of Public Health (DPH) does this for public swimming pools, organized camps, and food establishments.
This bill requires BSC to adopt specific building standards related to retail food facilities (restaurants) that the author and sponsor believe will ease regulatory burdens and cut costs for small business owners.
Like-For-Like Equipment. This bill establishes a streamlined approval process for a local permit for a like-for-like equipment installation (the installation or replacement of substantially similar existing approved equipment) for restaurants. The author contends that restaurants seeking to replace outdated or broken commercial kitchen equipment are often required to navigate lengthy permitting and inspection processes, even when the replacement equipment is virtually identical to what already exists, causing delays and lost revenue. Please see the Business and Professions Committee analysis for additional background on these provisions.
According to the Author
California's neighborhood restaurants are the heart of California's communities, yet so many are fighting just to survive. The author states that this bill is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, California's communities are stronger for it.
Arguments in Support
The Independent Hospitality Coalition (IHC) is the sponsor of this bill and states that this bill is the result of ongoing collaboration between small business stakeholders, industry professionals, and public health regulators to identify areas where outdated or duplicative requirements can be modernized without compromising safety. IHC continues that this bill streamlines permitting for routine equipment installations, modernizes provisions of the CRFC to better reflect current operations, and reduces unnecessary regulatory triggers that increase costs without improving public outcomes. IHC states that by doing so, this bill will do the following: reduce barriers to entry for new and emerging small businesses; lower upfront and ongoing costs for operators; shorten permitting timelines and reduce delays in opening or reinvestment; support adaptive reuse of existing commercial spaces; and, create more opportunities for small businesses to succeed and grow. IHC continues that this bill maintains core public health and safety protections, that regulatory oversight focuses meaningful risks while eliminating outdated or redundant requirements that burden both businesses and agencies. IHC concludes that this bill is a commonsense reform that reflects how small businesses operate today and provides a clear pathway to reduce costs, remove unnecessary barriers, and expand economic opportunity.
Arguments in Opposition
None on file.
FISCAL COMMENTS
According to the Assembly Committee on Appropriations, BSC would need to hire a two-year limited-term associate architect to research, develop, and propose the subject standards. BSC estimates costs of $296,000 in fiscal year (FY) 2029-30 and $306,000 in FY 2030-31 (Building Standards Administration Special Revolving Fund and Department of General Services (DGS) Service Revolving Fund). BSC explains this bill will also have an unknown fiscal impact to the State Fire Marshal, Department of Health Care Access and Information, Division of the State Architect, Energy Commission, and other agencies through its effects on the funds cited. Costs of an unknown but potentially significant amount to the Contractors State License Board (CSLB), which expects this bill will increase complaints from local building departments, other agencies, and consumers regarding negligent or false certifications of compliance with building codes (Contractors License Fund). CSLB notes such cases require the same level of investigative work as other disciplinary matters, including reviewing certification packets submitted by local agencies, coordinating with local building departments to verify permit timelines, and determining whether misrepresentation or false statements warrant disciplinary action. CSLB states it will need an additional position for every additional 53 complaints per year. Costs of an unknown but likely absorbable amount to DPH. The California Conference of Directors of Environmental Health anticipates no costs to local environmental health agencies.
VOTES
ASM HEALTH: 16-0-0
YES: Bonta, Chen, Addis, Aguiar-Curry, Ahrens, Caloza, Carrillo, Mark González, Johnson, Patel, Patterson, Rogers, Sanchez, Schiavo, Sharp-Collins, Stefani
ASM BUSINESS AND PROFESSIONS: 18-0-1
YES: Berman, Johnson, Addis, Ahrens, Alanis, Bains, Bauer-Kahan, Chen, Elhawary, Hadwick, Haney, Hart, Irwin, Jackson, Lowenthal, Macedo, Nguyen, Pellerin
ABS, ABST OR NV: Caloza
ASM APPROPRIATIONS: 15-0-0
YES: Wicks, Hoover, Aguiar-Curry, Calderon, Caloza, Dixon, Fong, Mark González, Krell, Pacheco, Pellerin, Sharp-Collins, Solache, Ta, Tangipa
UPDATED
VERSION: March 23, 2026
CONSULTANT: Eliza Brooks / HEALTH / (916) 319-2097 FN: 0002896
Date of Hearing: May 13, 2026
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
ABPCA Bill Id:AB 1915
Author:(Gabriel) – As Amended Ver:March 23, 2026
Policy Committee: | Health | Vote: | 16 - 0 |
Business and Professions | 18 - 0 | ||
|
|
Urgency: No State Mandated Local Program: Yes Reimbursable: No
SUMMARY:
This bill makes changes to the California Retail Food Code (CRFC) related to food handling, equipment, and structures in restaurants. This bill also requires the Building Standards Commission (BSC), as part of the next triennial update of the California Building Standards Code, to adopt various building standards related to restrooms, cooking equipment, and dishwashers, among other things. The bill waives inspections for a like-for-like equipment installation in a restaurant and instead requires a local building department to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
FISCAL EFFECT:
- BSC would need to hire a two-year limited-term associate architect to research, develop, and propose the subject standards. BSC estimates costs of $296,000 in fiscal year (FY) 2029-30 and $306,000 in FY 2030-31 (Building Standards Administration Special Revolving Fund and Department of General Services (DGS) Service Revolving Fund). BSC explains this bill will also have an unknown fiscal impact to the State Fire Marshal, Department of Health Care Access and Information, Division of the State Architect, Energy Commission, and other agencies through its effects on the funds cited.
- Costs of an unknown but potentially significant amount to the Contractors State License Board (CSLB), which expects this bill will increase complaints from local building departments, other agencies, and consumers regarding negligent or false certifications of compliance with building codes (Contractors License Fund). CSLB notes such cases require the same level of investigative work as other disciplinary matters, including reviewing certification packets submitted by local agencies, coordinating with local building departments to verify permit timelines, and determining whether misrepresentation or false statements warrant disciplinary action. CSLB states it will need an additional position for every additional 53 complaints per year.
- Costs of an unknown but likely absorbable amount to the California Department of Public Health.
- The California Conference of Directors of Environmental Health anticipates no costs to local environmental health agencies.
COMMENTS:
- Purpose. This bill is sponsored by Independent Hospitality Coalition. According to the author:
California's neighborhood restaurants are the heart of our communities, yet so many are fighting just to survive. [This bill] is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, our communities are stronger for it.
- Background. The California Building Standards Code regulates the design, construction, quality of materials, use and occupancy, location, and maintenance of all buildings and structures in the state. The California Building Standards Code is published every three years, though intervening code adoption cycles produce supplements 18 months into each triennial period. The 2025 Building Standards Code took effect on January 1, 2026. Several state agencies are tasked with developing building standards for various building occupancies and building uses. For example, the California Department of Public Health is responsible for proposing building standards related to food establishments in the CRFC. The CRFC is modeled after the federal Food and Drug Administration’s Model Food Code, which is updated every four years to enhance food safety laws based on the best available science. Between each four-year period, the FDA makes available a Food Code Supplement that updates, modifies, or clarifies certain provisions.
Local building departments and environmental health agencies enforce state and local building standards and the CRFC and are responsible for evaluating permit applications for compliance. A local building department cannot issue a permit without approval from the local environmental health agency. Construction work requiring a permit cannot begin until a permit is issued. After the work is completed, local building officials conduct various inspections to ensure the construction work was done correctly.
- Related and Prior Legislation. AB 671 (Wicks and Gabriel), Chapter 470, Statutes of 2025, requires a local building department or permitting department to allow a qualified professional certifier to self-certify that tenant improvement plans relating to a restaurant comply with all applicable building, health, and safety codes, and requires local building departments to approve or reject those plans within 20 days.
AB 1470 (Haney), of the current legislative session, would have made substantially similar changes to the CRFC that this bill makes to structures in restaurants, and exemptions for temporary food facilities from overhead protections and other specified protections. AB 1470 was held on the Senate Appropriations Committee suspense file.
AB 2550 (Gabriel), of the 2023-24 Legislative Session, would have made substantially similar changes to the CRFC that this bill makes for structures in restaurants. AB 2550 would also have required the CBSC to adopt similar building standards for restrooms, drinking fountains, cooking equipment, and dishwashers. AB 2550 was held on the Senate Appropriations Committee suspense file.
Analysis Prepared by: Allegra Kim / APPR. / (916) 319-2081
Date of Hearing: April 21, 2026
ASSEMBLY COMMITTEE ON BUSINESS AND PROFESSIONS
Marc Berman, Chair
ABPCA Bill Id:AB 1915
Author:(Gabriel) – As Amended Ver:March 23, 2026
NOTE: This bill is double referred and passed the Assembly Health Committee on April 14, 2026, on a 16-0-0 vote.
SUBJECT: Accelerated restaurant equipment permitting approval: retail food safety.
SUMMARY: Establishes a streamlined permit approval process and waives inspections for a like-for-like equipment installations at restaurants; requires the Building Standards Commission (CBSC) to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers; and makes various changes to the California Retail Food Code (CRFC) related to milk, non-continuous cooking, raw animal foods, handwashing sinks, refrigeration, grease traps and grease incinerators, and passthrough windows.
EXISTING LAW:
- Establishes, until January 1, 2029, the Contractors State License Board (CSLB) under the Department of Consumer Affairs to implement and enforce the License Law, which includes the licensing and regulation of contractors and home improvement salespersons. (Business and Professions Code (BPC) §§ 7000 et seq.)
- Exempts from the License Law a work or operation on one undertaking or project by one or more contracts if the aggregate price for labor, materials, and all other items is less than $1,000 that work or operation being considered of casual, minor, or inconsequential nature, and the work or operation does not require a building permit. (BPC § 7048)
- Authorizes the CSLB to issue licenses to individual owners, partnerships, corporations, and limited liability companies. (BPC § 7065(b))
- Establishes the CBSC within the Department of General Services and requires the CBSC to administer the processes related to the adoption, approval, publication, and implementation of California’s building codes, which serve as the basis for the design and construction of buildings in California. (Health & Safety Code (HSC) §§ 18901 et seq.)
- Specifies that where no state agency has the authority to adopt building standards applicable to state buildings, the CBSC shall adopt, approve, codify, and publish building standards providing the minimum standards for the design and construction of state buildings, including buildings constructed by the Trustees of the California State University and, to the extent permitted by law, to buildings designed and constructed by the Regents of the University of California. (HSC § 18934.5)
- Requires the Department of Alcoholic Beverage Control to administer the provisions of the Alcoholic Beverage Control Act, including the licensing of individuals and businesses in the manufacture, importation, and sale of alcoholic beverages. (BPC § 23000 et seq.)
- Establishes the CRFC to provide for the regulation of retail food facilities. Establishes health and sanitation standards at the state level through the CRFC, while enforcement is charged to local agencies, carried out by the 58 county environmental health departments and four city environmental health departments (Berkeley, Long Beach, Pasadena, and Vernon). (HSC §§ 113700 et seq.)
- Defines a “food facility” as an operation that stores, prepares, packages, serves, vends, or otherwise provides food for human consumption at the retail level. Excludes various entities from the definition of a “food facility,” including a cottage food operation, and a church, private club, or other nonprofit association that gives or sells food to its members and guests, and not to the general public, at an event that occurs no more than three days in any 90-day period. (HSC § 113789)
- Establishes requirements for satellite food services, including requiring satellite food service only be operated by a fully enclosed permanent food facility that meets the requirements for food preparation and service and that is responsible for servicing the satellite food service operation; that the permit holder of the permanent food facility submit to the enforcement agency written standard operating procedures prior to conducting the service, as specified; that all food preparation be conducted within a food compartment or fully enclosed facility; and, that service areas have overhead protection that extends over all food handling areas. (HSC § 114067)
- Defines “limited food preparation” to mean food preparation that is restricted to specified methods, including, among other things, cooking and seasoning to order, hot and cold handling of food that has been prepared at an approved permanent food facility, and reheating of food that has previously been prepared at an approved permanent food facility, as specified. Excludes from the definition the following, among other things: handling, manufacturing, processing or packaging of milk, milk products, or products resembling milk products as specified. (HSC § 113818)
- Defines “warm water” to mean water that is supplied through a mixing valve or combination faucet at a temperature of at least 100ºF. (HSC § 113941)
- Requires handwashing facilities to be provided within or adjacent to toilet rooms in accordance with local building and plumbing codes. Requires food facilities that handle non-prepackaged food to provide handwashing facilities in food preparation areas and warewashing areas that are sufficient in number and conveniently located for use by food employees. Requires these handwashing facilities to be equipped with to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet. Requires, if the temperature of water provided to a handwashing sink is not readily adjustable at the faucet, the temperature of the water to be at least 100°F, but not greater than 108°F. Authorizes an automatic handwashing facility to be installed and used in accordance with the manufacturer’s instructions. Authorizes the enforcement agency to allow handwashing facilities other than those required by this section when it deems that the alternate facilities are adequate. (HSC § 113953)
- Requires a thermometer to be provided for each refrigeration unit. Requires the thermometer to be located to indicate the air temperature in the warmest part of the unit and, except for vending machines, to be affixed to be readily visible. (HSC § 114157)
- Prohibits a grease trap or grease interceptor from being located in a food preparation or utensil handling area unless specifically approved by the enforcement agency. Requires grease traps and grease incinerators to be easily accessible for servicing. (HSC § 114201)
- Limits passthrough window service openings to be limited to 216 square inches each. Prohibits service openings from being closer together than 18 inches. Requires each opening to be provided with a solid or screened window, equipped with a self-closing device. Requires screening to be at least 16 mesh per square inch. Approves passthrough windows of up to 432 square inches approved if equipped with an air curtain device. Requires the counter surface of the service openings to be smooth and easily cleanable. (HSC § 114259.2)
- Requires the walls and ceilings of all rooms within permanent food facilities to be of a durable, smooth, nonabsorbent, and easily cleanable surface, except as specified. (HSC § 114271)
- Requires temporary food facilities to be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Requires overhead protection to be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants. Requires temporary food facilities that handle nonprepackaged food to also protect food from contamination in one of the following ways:
- Enclosure of the food facility with 16 mesh per square inch screens;
- Limiting display and handling of nonprepackaged food in food compartments; or,
- Other alternative, effective means approved by the enforcement officer.
(HSC § 114349(a)-(b))
- Exempts temporary food facilities that are approved for limited food preparation from the requirements above if flying insects, vermin, birds, and other pests are absent due to the location of the facility or other limiting conditions. (HSC § 114349(c))
- Requires potentially hazardous food to be maintained at or above 135°F, or at or below 41°F, except during preparation, cooking, cooling, or transportation or from a food facility, or as otherwise specified. (HSC § 113996(a))
- Authorizes potentially hazardous foods, as specified, to be held at or below 45°F (HSC § 113996(c))
- Authorizes potentially hazardous foods held for dispensing in serving lines and salad bars to be maintained above 41°F, but not above 45°F, during periods not to exceed 12 hours in any 24-hour period only if the unused portions are disposed of at or before the end of this 24-hour period. Specifies that a display case is not a serving line. (HSC § 113996(d))
- Requires, except as specified, if time only, rather than time in conjunction with temperature, is used as the public health control for a working supply of potentially hazardous food before cooking or for ready-to-eat potentially hazardous food that is displayed or held for service for immediate consumption, the following to occur:
- The food to be marked or otherwise identified to indicate the time that is four hours past the point in time when the food is removed from temperature control;
- The food to be cooked and served, served if ready-to-eat, or discarded within four hours from the point in time when the food is removed from temperature control;
- The food in unmarked containers or packages or marked to exceed a four-hour limit to be discarded; and,
- Written procedures to be maintained in the food facility and made available to the enforcement agency upon request for food that is prepared, cooked, and refrigerated before time is used as a public health control.
(HSC § 114000)
- Requires, whenever food has been prepared or heated so that it becomes potentially hazardous, the food be rapidly cooled if not held at or above 135°F. Requires, after heating or hot holding, potentially hazardous food to be cooled rapidly from 135ºF to 41°F or below within six hours and, during this time the decrease in temperature from 135°F to 70°F is required to occur within two hours. Requires potentially hazardous food to be cooled within four hours to 41°F or less if prepared from ingredients at ambient temperature, such as reconstituted foods and canned tuna. Requires, except for a specified exemption of pasteurized milk, raw shell eggs and unshucked live molluscan shellfish, a potentially hazardous food received in compliance with laws allowing a temperature above 41°F during shipment from the supplier to be cooled within four hours to 41°F or less. (HSC § 114002)
- Requires, whenever food has been prepared or heated so that it becomes potentially hazardous, the food to be rapidly cooled if not held at or above 135°F. Requires, after heating or hot holding, potentially hazardous food to be cooled rapidly from 135ºF to 41°F or below within six hours and, during this time the decrease in temperature from 135°F to 70°F is required to occur within two hours.
- Requires potentially hazardous food to be cooled within four hours to 41°F or less if prepared from ingredients at ambient temperature, such as reconstituted foods and canned tuna;
- Requires a potentially hazardous food received in compliance with laws allowing a temperature above 41°F during shipment from the supplier to be cooled within four hours to 41°F or less; and,
- Exempts pasteurized milk in original, sealed containers, pasteurized milk products in original, sealed containers, raw shell eggs, and unshucked live molluscan shellfish from the requirements of a) and b) above if these foods are placed, immediately upon their receipt, in refrigerated equipment that maintains an ambient temperature of 45°F or less.
(HSC § 114002)
- Establishes specific requirements for the temperature and time for the cooking of raw animal foods such as eggs, fish, meat, poultry, and all foods containing these raw animal foods as specified. (HSC § 114004)
THIS BILL:
- Defines “licensed commercial contractor” to mean a contractor licensed pursuant to the Business and Professions Code holding a valid and active license in good standing in the appropriate classification for the work performed.
- Defines “like-for-like equipment installation” to mean the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
- Change the use or occupancy classification of the building.
- Alter structural or load-bearing elements.
- Modify fire or life safety systems, except for direct connection to existing approved systems.
- Increase approved utility capacity.
- Require discretionary review.
- Defines “qualified licensed contractor certifier” to mean a licensed commercial contractor who satisfies all the following:
- Holds a valid license in good standing in the appropriate classification for the work performed.
- Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience.
- Maintains commercial general liability insurance in an amount not less than $2,000,000 per occurrence.
- Is not subject to any current suspension, probation, or enforcement action by the CSLB.
- Defines “restaurant” to mean a retail food establishment that prepares, serves, and vends food directly to the consumer and is not a fast food restaurant.
- Requires, upon request of an applicant for a permit for a like-for-like equipment installation relating to a restaurant, a local building department to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
- Requires a certification submitted pursuant to this bill to satisfy the inspection requirement for the qualifying installation.
- Provides that certification shall be at the applicant’s expense and does not exempt the project from permit requirements.
- Requires a qualified licensed contractor certifier to submit an affidavit, under penalty of perjury, attesting to both of the following:
- The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation.
- The work performed is limited to a like-for-like equipment installation.
- Requires the local building department to approve or deny a complete permit application within 10 business days of receipt.
- Specifies that if the local building department does not approve or deny the application within 10 business days of receipt, the permit shall be deemed approved for permitting purposes, provided all required fees have been paid.
- Makes a qualified licensed contractor certifier liable for damages arising from negligent or false certification under this bill.
- Requires the applicant to indemnify the local agency from property damage or personal injury arising from construction performed pursuant to this bill.
- States that a false statement made in a certification submitted pursuant to this bill constitutes grounds for disciplinary action by the CSLB and may constitute grounds for a conviction of perjury.
- Requires a city, county, or city and county to adopt reasonable administrative requirements to implement this chapter.
- Requires, as a part of the next triennial update of the California Building Standards Code that occurs on or after January 1, 2027, the CBSC to adopt building standards that do all of the following:
- Authorize a business establishment that is takeout only to operate without providing customer restrooms.
- Authorize a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals.
- Authorize a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms.
- Authorize a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders.
- Authorize a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains.
- Authorize a business establishment to operate cooking equipment without installing a Type 1 hood, as described, over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and does not produce cooking odors, smoke, grease, or vapor.
- Authorize a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
- Defines “alcohol” to mean ethyl alcohol, hydrated oxide of ethyl, or spirits of wine, from whatever source or by whatever process produced.
- Includes the handling of milk, milk products, or products resembling milk products in the definition of limited food preparation.
- Defines “noncontinuous cooking,” also known as “par-cooking,” to mean the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service. Specifies that “noncontinuous cooking” does not include cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
- Changes the required temperature within the existing definition of “warm water” supplied through a mixing valve or combination faucet, from a temperature of at least 100 degrees (°) Fahrenheit (F), to a temperature of least 85° F but not greater than 100 °F and makes a conforming change as it relates to handwashing facilities which are required to be equipped with warm water.
- Prohibits a steam mixing valve from being used at a handwashing sink.
- Requires a self-closing, slow-closing, or metering faucet to provide a flow of water of at least 15 seconds without the need to reactivate the faucet.
- Requires raw animal foods that are cooked using a noncontinuous cooking process to be all of the following:
- Subject to an initial heating process that is no longer than 60 minutes in duration.
- Immediately after initial heating, cooled according to the time and temperature parameters as specified in existing law for cooked potentially hazardous foods.
- After cooling, held frozen or cold, as specified in existing law for potentially hazardous foods.
- Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under the existing requirements for cooked potentially hazardous foods.
- Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods under existing law if not either hot held, served immediately, or held using time as a public health control after complete cooking.
- Prepared and stored according to written procedures that meet all of the following conditions:
- Are maintained in the food facility and are available to the enforcement agency upon request.
- Describe how the requirements above are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met.
- Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be cooked prior to being offered for sale or service.
- Describe how the foods, after initial heating but prior to cooking, are to be separated from ready-to-eat foods.
- Replaces the term “thermometer” with “temperature measuring device,” thereby requiring a refrigeration unit to be equipped with a temperature measuring device rather than a thermometer.
- Modifies an existing prohibition on locating a grease trap or grease interceptor in a food or utensil handling area to specify that a grease trap or grease interceptor shall not be located in a food preparation or utensil handling area (emphasis added to distinguish from existing law).
- Specifies that the prohibition above does not apply to either of the following:
- An aboveground grease trap installed under a three-compartment sink under the following conditions:
- A structural hardship can be determined preventing the grease trap or grease interceptor from being installed in an area not designated for food preparation or food storage or a utensil handling area.
- The site can provide a cleaning or maintenance plan that indicates how and when the grease trap or grease interceptor will be accessed for service to prevent any cross contamination of food or food contact surfaces; and,
- The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
- An aboveground grease trap installed under a three-compartment sink under the following conditions:
- Provides that any food facility approved with a grease trap or grease interceptor that is in operation before the effective date of this new requirement is also exempt.
- Deletes the requirement that passthrough window service openings are limited to 216 square inches each.
- Deletes the requirement that passthrough window service openings be equipped with a self-closing device and instead specifies that the window is required to be closed when not in use.
- States that a passthrough window service opening of up to 432 square inches is approved if equipped with an air curtain device or a self-closing device (emphasis added to distinguish from existing law). Requires the counter surface of the service opening to be smooth and easily cleanable.
- Provides that at a drive-through, a passthrough service opening that is larger than 432 square inches is approved if equipped with both a self-closing device and an air curtain device. Requires the counter surface of the service opening to be smooth and easily cleanable.
- Exempts the following areas from the existing requirement that a food facility’s walls must be durable, smooth, nonabsorbent, and easily cleanable:
- Walls and ceilings of any areas in which beverages (not limited to alcoholic beverages) are sold, served, or dispensed directly to the consumers, except wall areas adjacent to bar sinks and areas where food, including beverages, are prepared (emphasis added to distinguish from existing law).
- Restrooms that are used exclusively by employees, except that the walls and ceilings in the restrooms must be a washable surface.
- Exempts a temporary food facility that is approved for limited food preparation from the existing requirement that temporary food facilities be equipped with overhead protection for all food preparation, food storage, and warewashing areas if environmental factors, including but not limited to precipitation and wind that could contaminate the food, are absent due to the location of the facility or other limiting conditions.
- Includes findings and declarations.
- Specifies that no reimbursement is required by this bill.
FISCAL EFFECT: Unknown; this bill is keyed fiscal by Legislative Counsel.
COMMENTS:
Purpose. This bill is sponsored by the Independent Hospitality Industry. According to the author, "California's neighborhood restaurants are the heart of our communities, yet so many are fighting just to survive. [This bill] is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, our communities are stronger for it."
Background.
Contractors State License Board. The CSLB is responsible for implementing and enforcing the License Law, which governs the licensure, practice, and discipline of contractors in California. A license is required for construction projects valued at $1,000 or more, including labor and materials. The CSLB issues licenses to business entities and sole proprietors. Each license requires a qualifying individual (a “qualifier”) who satisfies the experience and examination requirements for licensure and directly supervises and controls construction work performed under the license. The CSLB issues four types of licenses: “A” General Engineering Contractor; “B” General Building Contractor; “B-2” Residential Remodeling Contractor; and “C” Specialty Contractor, of which there are 42 classifications. Each licensing classification (i.e., electrical, drywall, plumbing, roofing, and fencing) authorizes a specific type of construction work.
Building Permit Process. Local building departments and environmental health agencies enforce state and local building standards and the CFRC, and are responsible for evaluating permit applications for compliance. The local building department cannot issue a permit without approval from the local environmental health agency. Building departments may contract with a private entity to provide plan-checking services. Construction work requiring a permit cannot begin until a permit is issued. After the work is completed, local building officials conduct various inspections to ensure it was done correctly.
This bill would allow a “qualified licensed contractor certifier” to self-certify that a permit for a like-for-like equipment installation relating to a restaurant complies with all applicable codes. This bill specifies that a “qualified licensed contractor certifier” is a licensed commercial contractor who holds a valid license in good standing from CSLB in the appropriate classification for the work performed, has five years of experience performing commercial food service equipment installation or commercial restaurant construction experience, maintains commercial liability insurance, as specified, and is not subject to current enforcement action by the CSBL. The “qualified licensed contractor certifier” must sign an affidavit, under penalty of perjury, attesting that the equipment installation complies with all building, electrical, mechanical, plumbing, fire, and health and safety codes, and the work performed is limited to a like-for-like equipment installation, as defined. The bill further waives the inspection requirement when a “qualified licensed contractor certifier” submits a certification and affidavit.
California Building Standards Code. The California Building Standards Code (Cal. Code Regs., Title 24) regulates the design, construction, quality of materials, use and occupancy, location, and maintenance of all buildings and structures in the state, and includes standards for building safety (the Building Code), fire safety standards (the Fire Code), energy efficiency standards (the Energy Code), and standards for green buildings (CalGreen). The California Building Standards Code is published every three years, though intervening code adoption cycles produce supplements 18 months into each triennial period. The adoption of building standards is subject to a lengthy, public process. The 2025 Building Standards Code took effect on January 1, 2026.
The CBSC is charged, in part, with administering California’s building code adoption process; reviewing and approving building standards proposed and adopted by state agencies; codifying and publishing approved building standards in the California Building Standards Code; and resolving conflicts, duplications, and overlaps in building standards. The California Building Standards Code comprises building standards adopted by state agencies; building standards adopted and adapted from national model codes; and building standards authorized by the California Legislature that address issues and concerns specific to California. Several state agencies are tasked with developing building standards for various building occupancies and building uses. For example, the California Department of Public Health is responsible for proposing building standards related to food establishments. The CBSC’s authority and expertise to develop and propose building standards are limited to the following nonresidential occupancy types and subject areas:
- Specified state buildings as well as buildings constructed by the Trustees of the California State University and the Regents of the University of California.
- Seismic retrofit standards for state buildings, including those owned by the University of California and California State University.
- Standards for parking lot lighting systems for the University of California, California State University, and California Community Colleges.
- Green building standards for nonresidential occupancy types for which no other state agency has authority.
This bill requires the CBSC to adopt specific building standards pertaining to restaurants as part of the next triennial update of the California Building Standards Code. Specifically, the building standards would authorize a takeout-only restaurants to operate without providing customer restrooms, authorize restaurants with a 49-person occupancy limit to provide restrooms without urinals, authorize restaurants to have 1,000 square feet of patio seating without providing additional restrooms, authorize restaurants with a 100-person occupancy limit to operate without drinking fountains, authorize restaurants to operate cooking equipment for baking without a hood, as specified, and authorize a restaurant to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
California Retail Food Code. The CFRC is intended to prevent and provide safeguards to minimize foodborne illness, protect employees' health, ensure food safety, require the use of nontoxic, cleanable equipment, and specify the level of sanitation necessary for food facilities. As noted in the Assembly Health Committee analysis of this bill:
The CRFC is modeled after the federal Food and Drug Administration’s (FDA) Model Food Code (Food Code), which is updated every four years to enhance food safety laws based on the best available science. Between each four-year period, the FDA makes available a Food Code Supplement that updates, modifies, or clarifies certain provisions. The Food Code assists food control jurisdictions at all levels of government by providing them with a scientifically sound technical and legal basis for regulating the retail and food service segment of the industry, such as restaurants, grocery stores, and institutions like nursing homes. Forty-eight states and territories have adopted food codes patterned after the Food Code, representing 80% of the US population.
Sixty-two local environmental health regulatory agencies enforce the CRFC. The California Department of Public Health, Food and Drug Branch, plays a supporting role in the enforcement of the CRFC by providing technical expertise to evaluate processes and procedures and to answer technical and legal inquiries for local agencies, industry, and consumers. These provisions are subject to the jurisdiction of the Assembly Health Committee, which previously heard this bill.
According to the author’s office, “many small business owners are people of color that depend on their business to bring food to the table. By reducing this unnecessary red tape more people from marginalized communities will be encouraged to own a small business that can also help diversify the community the business lives in.”
Current Related Legislation. AB 1963 (Zbur) would require a local building department to allow a “qualified professional certifier,” as specified, to certify compliance with appliance building, health, and safety codes for a tenant improvement plan related to a retailer, as defined, and require the local building department to approve or deny the permit application within 20 business days. AB 1963 is pending in this committee.
Prior Related Legislation. AB 671 (Wicks and Gabriel), Chapter 470, Statutes of 2025, requires a local building department or permitting department to allow a qualified professional certifier to self-certify that tenant improvement plans relating to a restaurant comply with all applicable building, health, and safety codes, and requires local building departments to approve or reject those plans within 20 days.
AB 1470 (Haney) of 2025 would have made substantially similar changes to the CRFC that this bill makes as it relates to grease traps and grease inceptors, passthrough window service openings, walls and ceilings in beverage areas and restrooms, and exemptions for temporary food facilities from overhead protections and other specified protections if environmental factors that would contaminate the food are absent. AB 1470 was held on the Senate Appropriations Committee Suspense File.
AB 2550 (Gabriel) of 2024 would have made substantially similar changes to the CRFC that this bill makes as it relates to grease traps and grease inceptors, passthrough window service openings, walls and ceilings in beverage areas and restrooms, and exemptions for temporary food facilities from overhead protections and other specified protections if environmental factors that would contaminate the food are absent. Additionally, AB 2550 would have similarly required the CBSC to adopt building standards for restrooms, drinking fountains, cooking equipment, and dishwashers. AB 2550 was held on the Senate Appropriations Committee Suspense File.
ARGUMENTS IN SUPPORT:
As the sponsor of this bill, the Independent Hospitality Association writes:
Restaurants and small food businesses are foundational to California’s economy, workforce, and neighborhood vitality. Prior to the pandemic, the restaurant and food service sector employed approximately 400,000–500,000 workers in the Greater Los Angeles region alone, and continues to generate significant local and state tax revenue. Yet today, the industry is facing sustained economic pressure. Across the United States, more than 72,000 restaurants closed in 2024, and restaurant bankruptcies reached their highest levels since the pandemic. According to the National Restaurant Association, 42% of operators reported that they were not profitable in 2025. At the same time, businesses are contending with rising food costs, increased labor expenses, higher rents, and ongoing economic uncertainty in many local markets. In this environment, reducing the cost of opening and operating a business is not just helpful—it is essential. One of the most immediate and solvable challenges facing small businesses today is the high cost and complexity of regulatory compliance. Even routine improvements—such as replacing equipment or making minor tenant improvements—can trigger lengthy permitting timelines, multiple agency reviews, and costly requirements that delay openings and strain already limited capital. For many entrepreneurs, these barriers function as a significant barrier to entry, preventing otherwise viable businesses from opening or expanding. For existing operators, these same inefficiencies make it more difficult to reinvest, adapt, and remain competitive.
ARGUMENTS IN OPPOSITION:
There is no opposition on file.
IMPLEMENTATION ISSUES:
Conflict of Interest. This bill allows “qualified licensed contractor certifiers” to sign off on their own work and waive inspection, eliminating any third-party, objective verification that their work was performed correctly.
“Qualified professional certifier” Eligibility Verification. There does not appear to be any mechanism to verify that a “qualified professional certifier” has at least five years of experience “performing commercial food service equipment installation or commercial restaurant construction experience.”
Enforcement. Although any false statement in a certification submission would be cause for disciplinary action by the Contractors State License Board, there is no requirement for either the licensee or the local building department to notify the CSLB.
Vagueness. Most notably, “commercial food service equipment” is not defined, leaving unclear which types of equipment would be covered by this bill. Additionally, this bill covers both the installation and replacement of equipment that is “substantially similar in size, function, and utility demand to existing approved equipment.” It is unclear whether “existing approved equipment” means equipment that was or is currently installed and being replaced, and, if so, how “installation” differs from “replacement.” It is also unclear what constitutes five years of “performing commercial food service equipment installation or commercial restaurant construction experience.”
Breadth. This bill requires a licensed contractor to have “a valid license in good standing in the appropriate classification for the work performed.” The author may wish to narrow the bill to specific contractor classifications, such as a General Engineering Contractor, General Building Contractor, C-4 - Boiler, Hot Water Heating and Steam Fitting Contractor, C-10 - Electrical Contractor, C-36 - Plumbing Contractor, or C-38 - Refrigeration Contractor license.
REGISTERED SUPPORT:
Independent Hospitality Association (Sponsor)
Betsy Restaurant
Burger She Wrote
California Association of Environmental Health Administrators
California Community Foundation
California Restaurant Association
California Travel Association
Central City Association of Los Angeles
Chick-fil-a
Civil Coffee
Council of Infill Builders
Ferrazzanis
Golden Gate Restaurant Association
Inclusive Action for the City
Little Tokyo Service Center
Venice Chamber of Commerce
REGISTERED OPPOSITION:
There is no opposition on file.
Analysis Prepared by: Kaitlin Curry / B. & P. / (916) 319-3301
Date of Hearing: April 14, 2026
ASSEMBLY COMMITTEE ON HEALTH
Mia Bonta, Chair
ABPCA Bill Id:AB 1915
Author:(Gabriel) – As Amended Ver:March 23, 2026
SUBJECT: Accelerated restaurant equipment permitting approval: retail food safety.
SUMMARY: Makes various changes to the California Retail Food Code (CRFC) related to milk, non-continuous cooking, raw animal foods, handwashing sinks, refrigeration, grease traps and grease incinerators, and passthrough windows. Requires the Building Standards Commission as part of its next triennial update to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers. Establishes a streamlined approval process for a local permit for a like-for-like equipment installation (the installation or replacement of substantially similar existing approved equipment) for restaurants. Specifically, this bill:
Limited Food Preparation
- Removes the existing exclusion of the handling of milk, milk products or products resembling milk products from the definition of limited food preparation.
Non-Continuous Cooking
- Establishes in the CRFC a definition for “noncontinuous cooking,” also known as “par-cooking,” to mean the cooking of food in a food facility using a process in which the initial heating of the food is intentionally halted so that it may be cooled and held for complete cooking at a later time prior to sale or service. Excludes from this definition cooking procedures that only involve temporarily interrupting or slowing an otherwise continuous cooking process.
- Requires raw animal foods that are cooked using a noncontinuous cooking process to be all of the following:
- Subject to an initial heating process that is no longer than 60 minutes in duration;
- Immediately after initial heating, cooled according to the time and temperature parameters as specified in existing law for cooked potentially hazardous foods;
- After cooling, held frozen or cold, as specified in existing law for potentially hazardous foods;
- Prior to sale or service, cooked using a process that heats all parts of the food to a temperature and for a time as specified under the existing requirements for cooked potentially hazardous foods; and,
- Cooled according to the time and temperature parameters specified for cooked potentially hazardous foods under existing law if not either hot held, served immediately, or held using time as a public health control after complete cooking.
- Requires all raw animal foods that are cooked using a noncontinuous cooking process to be prepared and stored according to written procedures that meet all of the following conditions:
- Are maintained in the food facility and are available to the enforcement agency upon request;
- Describe how the requirements in 1) above, are to be monitored and documented by the permitholder and the corrective actions to be taken if the requirements are not met;
- Describe how the foods, after initial heating, but prior to complete cooking, are to be marked or otherwise identified as foods that are required to be cooked prior to being offered for sale or service; and,
- Describe how the foods, after initial heating but prior to cooking are to be separated from ready-to-eat foods.
Warm Water & Handwashing
- Changes the required temperature within the existing definition of “warm water” supplied through a mixing valve or combination faucet, from a temperature of at least 100 degrees (°) Fahrenheit (F), to a temperature of least 85° F but not greater than 100 °F and makes a conforming change as it relates to handwashing facilities which are required to be equipped with warm water.
- Prohibits a steam mixing valve from being used at a handwashing sink.
- Requires a self-closing, slow-closing, or metering faucet to provide a flow of water of at least 15 seconds without the need to reactivate the faucet.
Refrigeration
- Replaces the term “thermometer” with “temperature measuring device” in existing law 4) below, thereby requiring a refrigeration unit to be equipped with a temperature measuring device rather than a thermometer.
Grease Traps and Grease Incinerators
- Authorizes a grease trap or grease interceptor to be located in a food preparation or utensil handling area if all of the following conditions are met:
- A structural hardship can be determined preventing the grease trap or grease interceptor from being installed in an area not designated for food preparation or food storage or a utensil handling area;
- The site can provide a cleaning or maintenance plan that indicates how and when the grease trap or grease interceptor will be accessed for service to prevent any cross contamination of food or food contact surfaces; and,
- The site can provide procedures that will be taken to properly clean and sanitize the area following servicing.
Passthrough Window Service Openings
- Deletes the requirement that passthrough window service openings are limited to 216 square inches each.
- Deletes the requirement that passthrough window service openings are required to be equipped with a self-closing device and instead specifies each opening, provided with a solid or screened window is required to be closed when not in use.
- States that a passthrough window service opening of up to 432 square inches is approved if equipped with an air curtain device or a self-closing device (rather than just an air curtain device as specified in existing law below). Requires the counter surface of the service opening to be smooth and easily cleanable.
- States that at a drive-through, a passthrough service opening that is larger than 432 square inches is approved if equipped with both a self-closing device and an air curtain device. Requires the counter surface of the service opening to be smooth and easily cleanable.
Walls, Ceilings, and Overhead Protection
- Changes the exemption from the existing requirement that walls and ceilings of all rooms within a permanent food facility to be of a durable, smooth, nonabsorbent and easily cleanable surface in the following ways:
- Extends this exemption to apply to walls and ceilings of bar areas in which beverages are sold, served, and dispensed; and,
- Deletes this exemption’s existing application to restrooms that are used exclusively by consumers and instead applies it to restrooms that are used exclusively by employees.
- Adds environmental factors including but not limited to precipitation and wind that could contaminate the food to the list of factors specified in existing law 9) below which exempts temporary food facilities from certain requirements including overhead protection and protection of nonpreckaged food, as specified in existing law 8) below.
Streamlined Permits for Like-for Like Equipment Installation
- Requires, upon request of an applicant for a permit for a like-for-like equipment installation (the installation or replacement of substantially similar existing equipment) relating to a restaurant, a local building department to allow a qualified licensed contractor certifier to submit a certification of compliance with applicable codes.
- Requires a certification submitted pursuant to this bill to satisfy the inspection requirement for the qualifying installation.
- Requires certification pursuant to this bill to be at the applicant’s expense.
- Prohibits certification pursuant to this bill from exempting the project from permit requirements.
- Requires a qualified licensed contractor certifier to submit an affidavit, under penalty of perjury, attesting to both of the following:
- The equipment installation complies with all applicable building, electrical, mechanical, plumbing, fire, and health and safety codes in effect at the time of installation; and,
- The work performed is limited to a like-for-like equipment installation.
- Requires the local building department to approve or deny a complete permit application within 10 business days of receipt.
- Requires the permit to be deemed approved for permitting purposes, provided all required fees have been paid, if the local building department does not approve or deny the application within 10 business days of receipt.
- Makes a qualified licensed contractor certifier liable for damages arising from negligent or false certification under this bill.
- Requires the applicant to indemnify the local agency from property damage or personal injury arising from construction performed pursuant to this bill.
- States that a false statement made in a certification submitted pursuant to this bill constitutes grounds for disciplinary action by the Contractors State License Board (CSLB) and may constitute grounds for a conviction of perjury.
- Requires a city, county, or city and county to adopt reasonable administrative requirements to implement this chapter.
Building Standards Updates
- Requires the Building Standards Commission (as a part of its next triennial update of the California Building Standards Code that occurs on or after January 1, 2027) to adopt building standards that do all the following:
- Authorize a business establishment that is takeout only to operate without providing customer restrooms;
- Authorize a business establishment, regardless of whether the business establishment sells alcohol, with a maximum occupancy of 49 persons to provide restrooms without urinals;
- Authorizes a business establishment to install up to 1,000 square feet of patio seating without providing additional restrooms;
- Authorizes a business establishment that serves alcohol to satisfy a requirement to provide restrooms by exclusively providing restrooms for use by all genders;
- Authorizes a business establishment with a maximum occupancy of 100 occupants to operate without drinking fountains;
- Authorizes a business establishment to operate cooking equipment without installing a Type 1 hood over the cooking equipment, provided that the cooking equipment is operated for the purpose of baking and the equipment does not produce cooking odors, smoke, grease, or vapor; and,
- Authorize a business establishment to operate an under-the-counter dishwasher without installing a mechanical exhaust system over the dishwasher.
- Defines, for purposes of this bill, the following:
- “Licensed commercial contractor” to mean a contractor licensed pursuant to the Business and Professions Code holding a valid and active license in good standing in the appropriate classification for the work performed.
- “Like-for-like equipment installation” to mean the installation or replacement of commercial food service equipment that is substantially similar in size, function, and utility demand to existing approved equipment and does not do any of the following:
- Change the use or occupancy classification of the building;
- Alter structural or load-bearing elements;
- Modify fire or life safety systems, except for direct connection to existing approved systems;
- Increase approved utility capacity; and,
- Require discretionary review.
- “Qualified licensed contractor certifier” to mean a licensed commercial contractor who satisfies all the following:
- Holds a valid license in good standing in the appropriate classification for the work performed;
- Has not less than five years of experience performing commercial food service equipment installation or commercial restaurant construction experience;
- Maintains commercial general liability insurance in an amount not less than two million dollars ($2,000,000) per occurrence; and,
- Is not subject to any current suspension, probation, or enforcement action by the CSLB.
- “Restaurant” to mean a retail food establishment that prepares, serves, and vends food directly to the consumer and is not a fast food restaurant.
- “Alcohol” to mean ethyl alcohol, hydrated oxide of ethyl, or spirits of wine, from whatever source or by whatever process produced.
EXISTING LAW:
- Establishes the California Retail Food Code (CRFC) to provide for the regulation of retail food facilities. Establishes health and sanitation standards at the state level through the CRFC, while enforcement is charged to local agencies, carried out by the 58 county environmental health departments and four city environmental health departments (Berkeley, Long Beach, Pasadena, and Vernon). [Health & Safety Code (HSC) § 113700, et seq.]
Handwashing Facilities and Warm Water
- Defines “warm water” to mean water that is supplied through a mixing valve or combination faucet at a temperature of at least 100ºF. [HSC § 113941]
- Requires handwashing facilities to be provided within or adjacent to toilet rooms in accordance with local building and plumbing codes. Requires food facilities that handle nonprepackaged to provide handwashing facilities in food preparation areas and warewashing areas that are sufficient in number and conveniently located for use by food employees. Requires these handwashing facilities to be equipped with to provide warm water under pressure for a minimum of 15 seconds through a mixing valve or combination faucet. Requires, if the temperature of water provided to a handwashing sink is not readily adjustable at the faucet, the temperature of the water to be at least 100°F, but not greater than 108°F. Authorizes an automatic handwashing facility to be installed and used in accordance with the manufacturer’s instructions. Authorizes the enforcement agency to allow handwashing facilities other than those required by this section when it deems that the alternate facilities are adequate. [HSC § 113953]
Time and Temperature Requirements for Potentially Hazardous Food
- Requires potentially hazardous food to be maintained at or above 135°F, or at or below 41°F, except during preparation, cooking, cooling, or transportation or from a food facility, or as otherwise specified. [HSC § 113996 (a)]
- Authorizes the following potentially hazardous foods to be held at or below 45°F:
- Raw shell eggs;
- Unshucked live molluscan shellfish;
- Pasteurized milk and pasteurized milk products in original, sealed containers;
- Potentially hazardous foods held for dispensing in vending machines;
- Potentially hazardous foods held for sampling at a certified farmers’ market; and,
- Potentially hazardous foods held during transportation. [HSC § 113996 (c)]
- Authorizes potentially hazardous foods held for dispensing in serving lines and salad bars to be maintained above 41°F, but not above 45°F, during periods not to exceed 12 hours in any 24-hour period only if the unused portions are disposed of at or before the end of this 24-hour period. Specifies that a display case is not a serving line. [HSC § 113996 (d)]
- Requires, except as specified, if time only, rather than time in conjunction with temperature, is used as the public health control for a working supply of potentially hazardous food before cooking or for ready-to-eat potentially hazardous food that is displayed or held for service for immediate consumption, the following to occur:
- The food to be marked or otherwise identified to indicate the time that is four hours past the point in time when the food is removed from temperature control;
- The food to be cooked and served, served if ready-to-eat, or discarded within four hours from the point in time when the food is removed from temperature control;
- The food in unmarked containers or packages or marked to exceed a four-hour limit to be discarded; and,
- Written procedures to be maintained in the food facility and made available to the enforcement agency upon request for food that is prepared, cooked, and refrigerated before time is used as a public health control. [HSC § 114000]
- Requires, whenever food has been prepared or heated so that it becomes potentially hazardous, the food be rapidly cooled if not held at or above 135°F. Requires, after heating or hot holding, potentially hazardous food to be cooled rapidly from 135ºF to 41°F or below within six hours and, during this time the decrease in temperature from 135°F to 70°F is required to occur within two hours. Requires potentially hazardous food to be cooled within four hours to 41°F or less if prepared from ingredients at ambient temperature, such as reconstituted foods and canned tuna. Requires, except for a specified exemption of pasteurized milk, raw shell eggs and unshucked live molluscan shellfish, a potentially hazardous food received in compliance with laws allowing a temperature above 41°F during shipment from the supplier to be cooled within four hours to 41°F or less. [HSC § 114002]
- Requires, whenever food has been prepared or heated so that it becomes potentially hazardous, the food to be rapidly cooled if not held at or above 135°F. Requires, after heating or hot holding, potentially hazardous food to be cooled rapidly from 135ºF to 41°F or below within six hours and, during this time the decrease in temperature from 135°F to 70°F is required to occur within two hours.
- Requires potentially hazardous food to be cooled within four hours to 41°F or less if prepared from ingredients at ambient temperature, such as reconstituted foods and canned tuna;
- Requires a potentially hazardous food received in compliance with laws allowing a temperature above 41°F during shipment from the supplier to be cooled within four hours to 41°F or less; and,
- Exempts pasteurized milk in original, sealed containers, pasteurized milk products in original, sealed containers, raw shell eggs, and unshucked live molluscan shellfish from the requirements of a) and b) above if these foods are placed, immediately upon their receipt, in refrigerated equipment that maintains an ambient temperature of 45°F or less. [HSC § 114002]
- Establishes specific requirements for the temperature and time for the cooking of raw animal foods such as eggs, fish, meat, poultry, and all foods containing these raw animal foods as specified. [HSC § 114004]
Refrigeration
- Requires a thermometer to be provided for each refrigeration unit. Requires the thermometer to be located to indicate the air temperature in the warmest part of the unit and, except for vending machines, to be affixed to be readily visible. [HSC § 114157]
Grease Traps
- Prohibits a grease trap or grease interceptor from being located in a food preparation or utensil handling area unless specifically approved by the enforcement agency. Requires grease traps and grease incinerators to be easily accessible for servicing. [HSC § 114201]
Passthrough Windows
- Limits passthrough window service openings to be limited to 216 square inches each. Prohibits service openings from being closer together than 18 inches. Requires each opening to be provided with a solid or screened window, equipped with a self-closing device. Requires screening to be at least 16 mesh per square inch. Approves passthrough windows of up to 432 square inches approved if equipped with an air curtain device. Requires the counter surface of the service openings to be smooth and easily cleanable. [HSC § 114259.2]
Walls, Ceilings, and Overhead Protection
- Requires the walls and ceilings of all rooms within permanent food facilities to be of a durable, smooth, nonabsorbent, and easily cleanable surface, with the exception of the below:
- Walls and ceilings of bar areas in which alcoholic beverages are sold or served directly to the consumers, except wall areas adjacent to bar sinks and areas where food is prepared;
- Areas where food is stored only in unopened bottles, cans, cartons, sacks, or other original shipping containers;
- Dining and sales areas;
- Offices;
- Restrooms that are used exclusively by the consumers, except that the walls and ceilings in the restrooms are required to be of a nonabsorbent and washable surface; and,
- Dressing rooms, dressing areas, or locker areas. [HSC § 114271]
- Requires temporary food facilities to be equipped with overhead protection for all food preparation, food storage, and warewashing areas. Requires overhead protection to be made of wood, canvas, or other materials that protect the facility from precipitation, dust, bird and insect droppings, and other contaminants. Requires temporary food facilities that handle nonprepackaged food to also protect food from contamination in one of the following ways:
- Enclosure of the food facility with 16 mesh per square inch screens;
- Limiting display and handling of nonprepackaged food in food compartments; or,
- Other alternative, effective means approved by the enforcement officer. [HSC § 114349]
- Exempts temporary food facilities that are approved for limited food preparation from the requirements of 15) above if flying insects, vermin, birds, and other pests are absent due to the location of the facility or other limiting conditions. [Ibid.]
Handling
- Defines “limited food preparation” to mean food preparation that is restricted to specified methods, including, among other things, coking and seasoning to order, hot and cold handling of food that has been prepared at an approved permanent food facility, and reheating of food that has previously been prepared at an approved permanent food facility, as specified. Excludes from the definition the following, among other things: handling, manufacturing, processing or packaging of milk, milk products, or products resembling milk products as specified. [HSC § 113818]
Contractors
- Defines a “contractor” to mean any person who undertakes to or offers to undertake to, or purports to have the capacity to undertake to, or submits a bid to, or does their self or by or through others, construct, alter, repair, add to, subtract from, improve, move, wreck or demolish any building, highway, road, parking facility, railroad, excavation or other structure, project, development or improvement, or to do any part thereof, including the erection of scaffolding or other structures or works in connection therewith, or the cleaning of grounds or structures in connection therewith, or the preparation and removal of roadway construction zones, lane closures, flagging, or traffic diversions, or the installation, repair, maintenance, or calibration of monitoring equipment for underground storage tanks, and whether or not the performance of work herein described involves the addition to, or fabrication into, any structure, project, development or improvement herein described of any material or article of merchandise. Specifies that subcontractors and specialty contractors are included in this definition. [Business and Professions Code § 7026]
FISCAL EFFECT: Unknown. This bill has not been analyzed by a fiscal committee.
COMMENTS:
- PURPOSE OF THIS BILL. According to the author, California's neighborhood restaurants are the heart of California’s communities, yet so many are fighting just to survive. The author states that this bill is a commitment to stand beside them, offering the support they need to launch, adapt, and thrive. When local restaurants succeed, California’s communities are stronger for it.
- BACKGROUND.
- CRFC. The CRFC is modeled after the federal Food and Drug Administration’s (FDA) Model Food Code (MFC), which is updated every four years to enhance food safety laws based on the best available science. Between each four-year period, the FDA makes available a Food Code Supplement that updates, modifies, or clarifies certain provisions. The Food Code assists food control jurisdictions at all levels of government by providing them with a scientifically sound technical and legal basis for regulating the retail and food service segment of the industry, such as restaurants, grocery stores, and institutions like nursing homes. Forty-eight states and territories have adopted food codes patterned after the MFC, representing 80% of the United States’ population.
- Restaurant businesses. In their 2025 article titled “Los Angeles restaurants thought it couldn’t get any worse. Then 2025 happened,” the Los Angeles Times reported that last year restaurateurs said that the state of the hospitality industry was untenable due to the loss of business from the entertainment-industry strikes, cost-of-labor increases and repayment of COVID-era back rent and loans. In 2025 fires, ICE raids, neighborhood curfews and tariffs added to the strain on Los Angeles (L.A.) restaurants. In a new industry survey, 84.8% of L.A. restaurants said business decreased in 2025.
- Various changes to CRFC. This bill makes various changes to the CRFC related to the handling of milk, non-continuous cooking, raw animal foods, refrigeration, grease traps and grease incinerators, passthrough windows, and warm water at handwashing sinks. Some of the changes in this bill are substantially similar to provisions of the FDA’s 2022 MFC, which is the most recent version.
- Milk Products. Under the CRFC, “handling” of milk or milk products is excluded from the definition of limited food preparation. The author states this means, for example, coffee carts are not technically allowed to serve milk although such handling is happening safely throughout California. Authorizing the handling of milk products under this bill would codify this practice.
- Non-Continuous Cooking. Non-continuous (or “par”) cooking is a common food practice, especially in large hotel and catering operations. The author notes that because it is not defined in the CRFC, jurisdictions were not consistent in allowing the practice. The definition established in this bill is identical to the one within the FMC.
- Raw Animal Foods. Non-continuous cooking of raw animal foods is a process in which these foods are partially cooked, cooled, stored, and later finished to reach the required safe internal temperature in more than one heating step rather than in a single continuous cooking session. Some jurisdictions allow this practice, while others do not, as non-continuous cooking is not defined in the CRFC. This bill establishes a framework for the non-continuous cooking of raw animal foods within the CRFC and references several requirements for the cooking of potentially hazardous foods. This framework is substantially to the process for non-continuous cooking of raw animal foods within the MFC.
- Grease Traps and Grease Incinerators. This bill authorizes a grease trap or grease interceptor to be located in a food preparation or utensil handling area if specified conditions are met, including if the site can provide a plan and procedures to keep food surfaces clean and prevent cross-contamination. The author’s intent is to provide flexibility to restaurants while maintaining public health.
- Passthrough Windows. Currently, passthrough window service openings are limited to no more than 216 square inches, or up to 432 inches if equipped with an air curtain device. This bill gives flexibility to passthrough window service openings up to 432 inches to be either an air curtain device or self-closing device. Further, this bill authorizes larger passthrough window service openings but requires these windows to be equipped with both an air curtain device or self-closing device in order to protect public health (keeping the windows closed to prevent contamination of food).
- Warm Water. The changes in this bill relating to warm water and handwashing sinks align with the MFC which requires that handwashing sinks should be equipped to provide water at a temperature of at least 85 through a mixing valve or combination faucet and prohibits the use of a steam mixing valve.
- Building Standards Code Adoption Process. The Building Standards Commission is charged, in part, with the following tasks: administering California’s building code adoption process; reviewing and approving building standards proposed and adopted by state agencies; codifying and publishing approved building standards in the California Building Code; and resolving conflict, duplication, and overlap in building standards. The Building Standards Commission’s authority and expertise to develop and propose building standards (or, its “original jurisdiction”) is limited to the following nonresidential occupancy types and subject areas:
- Specified state buildings as well as buildings constructed by the Trustees of the California State University (CSU) and the Regents of the University of California (UC).
- Seismic retrofit standards for state buildings including those owned by the UC and CSU.
- Standards for parking lot lighting systems for the UC, CSU, and California Community Colleges.
- Green building standards for nonresidential occupancy types for which no other state agency has authority.
Several other state agencies are tasked with developing building standards for various building occupancies and building uses. For example, the Office of Statewide Health Planning and Development does this for hospitals and clinics (among other facilities) and The State Department of Public Health does this for public swimming pools, organized camps, and food establishments.
This bill requires the Building Standards Commission to adopt specific building standards related to retail food facilities (restaurants) that the author and sponsor believe will ease regulatory burdens and cut costs for small business owners.
- Like-For-Like Equipment. This bill establishes a streamlined approval process for a local permit for a like-for-like equipment installation (the installation or replacement of substantially similar existing approved equipment) for restaurants. The author contends that restaurants seeking to replace outdated or broken commercial kitchen equipment are often required to navigate lengthy permitting and inspection processes, even when the replacement equipment is virtually identical to what already exists, causing delays and lost revenue. These provisions will be further analyzed by the Business and Professions Committee.
- SUPPORT. The Independent Hospitality Coalition (IHC) is the sponsor of this bill and states that this bill is the result of ongoing collaboration between small business stakeholders, industry professionals, and public health regulators to identify areas where outdated or duplicative requirements can be modernized without compromising safety. IHC continues that this bill streamlines permitting for routine equipment installations, modernizes provisions of the CRFC to better reflect current operations, and reduces unnecessary regulatory triggers that increase costs without improving public outcomes. IHC states that by doing so, this bill will do the following: reduce barriers to entry for new and emerging small businesses; lower upfront and ongoing costs for operators; shorten permitting timelines and reduce delays in opening or reinvestment; support adaptive reuse of existing commercial spaces; and, create more opportunities for small businesses to succeed and grow. IHC continues that this bill maintains core public health and safety protections, that regulatory oversight focuses meaningful risks while eliminating outdated or redundant requirements that burden both businesses and agencies. IHC concludes that this bill is a commonsense reform that reflects how small businesses operate today and provides a clear pathway to reduce costs, remove unnecessary barriers, and expand economic opportunity.
- PREVIOUS LEGISLATION.
- AB 1470 (Haney) of 2025 would have made substantially similar changes to the CRFC that this bill makes as it relates to grease traps and grease interceptors, passthrough window service openings, walls and ceilings in beverage areas and restrooms, and exemptions for temporary food facilities from overhead protections and other specified protections if environmental factors that would contaminate the food are absent. AB 1470 was held on the Senate Appropriations suspense file.
- AB 2550 (Gabriel) of 2024 would have made substantially similar changes to the CRFC that this bill makes as it relates to grease traps and grease interceptors, passthrough window service openings, walls and ceilings in beverage areas and restrooms, and exemptions for temporary food facilities from overhead protections and other specified protections if environmental factors that would contaminate the food are absent. AB 2550 also includes nearly identical requirements for the Building Standards Commission to adopt various building standards related to restrooms, drinking fountains, cooking equipment, and dishwashers. AB 2550 was held on the Senate Appropriations suspense file.
- AB 1217 (Gabriel), Chapter 569, Statutes of 2023 extends among other things, until July 1, 2026 the authority of the Department of Alcoholic Beverage Control (ABC) to permit licensees to exercise license privileges in an expanded license area authorized pursuant to a COVID-19 Temporary Catering Authorization approved in accordance with the Fourth Notice of Regulatory Relief issued by the department on May 15, 2020. A COVID-19 Temporary Catering Authorization authorizes the on-sale consumption of those alcoholic beverages for which the licensee has on-sale privileges on property adjacent to the licensed premises, under the control of the licensee.
- SB 1194 (Allen), Chapter 839, Statutes of 2022 authorizes a city, county, or city and county to require, by ordinance or resolution, that public restrooms constructed within its jurisdiction be designed to serve all genders, as specified, instead of complying with the plumbing standards set forth in the California Building Standards Code. Makes this authority inoperative and repealed on the date that standards that address all gender multiuser facilities take effect in the California Building Standards Code.
- AB 61 (Gabriel), Chapter, Statutes of 2021 authorized ABC for 365 days from the date the COVID-19 pandemic state of emergency proclaimed by the Governor is lifted, to allow licensees to continue to exercise license privileges in an expanded licensed area authorized pursuant to a COVID-19 Temporary Catering Authorization, as provided. In addition, AB 61 authorized a permitted food facility to prepare and serve food as a temporary satellite food service without obtaining a separate permit for up to one year after the end of the state of emergency declared in response to the COVID-19 pandemic or until January 1, 2024, whichever comes first.
- AB 1732 (Ting), Chapter 818, Statues of 2016 requires all single-user toilet facilities in any business establishment, place of public accommodation, or government agency to be identified as all-gender toilet facilities, as specified. Authorizes inspectors, building officials, or other local officials responsible for code enforcement to inspect for compliance with these provisions during any inspection.
- POLICY COMMENT. As noted in the Business and Professions Committee’s analysis of AB 2550 (Gabriel) of 2024, which proposes nearly identical changes to the Building Standards Code, building standards related to retail food establishments fall outside the scope of the Building Standards Commission’s authority. As this bill moves forward, the author may wish to consider whether another entity such as DPH would be better suited to propose the types of building standards contemplated by this bill.
- DOUBLE REFERRAL. This bill is double referred, upon passage in this Committee, it will be referred to the Assembly Committee on Business and Professions.
REGISTERED SUPPORT / OPPOSITION:
Support
Independent Hospitality Coalition (sponsor)
Betsy Restaurant
Burger She Wrote
California Association of Environmental Health Administrators (CAEHA)
California Community Foundation
California Restaurant Association
Central City Association of Los Angeles
Chick-fil-A
Civil Coffee
Council of Infill Builders
Golden Gate Restaurant Association (GGRA)
Inclusive Action for the City
Little Tokyo Service Center
Opposition
None on file
Analysis Prepared by: Eliza Brooks / HEALTH / (916) 319-2097
Discussed in Hearing
Senate Standing Committee on Appropriations
Senate Standing Committee on Business, Professions and Economic Development
Senate Standing Committee on Housing
Senate Standing Committee on Health
Assembly Floor
Assembly Standing Committee on Health
Bill Author
Bill Co-Author(s):