AB 2047: Firearms: 3-dimensional printing blocking technology.
- Session Year: 2025-2026
- House: Assembly
- Latest Version Date: 2026-09-26
Current Status:
Passed
(2026-09-26: Chaptered by Secretary of State - Chapter 461, Statutes of 2026.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
Existing law authorizes a civil action against a person who knowingly distributes or causes to be distributed any digital firearm manufacturing code to any person, except as specified. Existing law authorizes the Attorney General, county counsel, or city attorney to bring an action against this person and seek a civil penalty, as specified, for each violation, as well as injunctive relief.
This bill would require the Department of Justice to check on a quarterly basis beginning no later than July 1, 2027, whether ASTM International has published industry standards for equipping 3-dimensional printers with firearm blocking technology. The bill would require, if the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for 3-dimensional printers, that the department publish written guidance or regulations within 24 months after making that determination. The bill would require, among other things, the written guidance or regulations to describe minimum performance standards for 3-dimensional printer firearm blocking technology before a printer can lawfully be sold or offered for sale in the state. If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for 3-dimensional printers, the bill would relieve the department of any further responsibility to ascertain whether ASTM International has published or adopted industry standards. The bill would make it unlawful to sell, offer for sale, or transfer for consideration, a 3-dimensional printer in the State of California that is not equipped with firearm blocking technology that also meets the above-described industry standards. The bill would exempt printers used exclusively for the manufacturing of properties (props) in the entertainment industry, and would authorize the department to adopt regulations that provide for additional exceptions to these provisions.
This bill would also exempt a person who distributes, or causes the distribution of, digital firearm manufacturing code, solely for the bona fide purpose of, among other things, developing, refining, and testing the functionality of a firearm blocking technology from civil liability.
This bill would make these provisions severable.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
Existing law authorizes a civil action against a person who knowingly distributes or causes to be distributed any digital firearm manufacturing code to any person, except as specified. Existing law authorizes the Attorney General, county counsel, or city attorney to bring an action against this person and seek a civil penalty, as specified, for each violation, as well as injunctive relief.
This bill would require the Department of Justice to check on a quarterly basis beginning no later than July 1, 2027, whether ASTM International has published industry standards for equipping 3-dimensional printers with firearm blocking technology. The bill would require, if the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for 3-dimensional printers, that the department publish written guidance or regulations within 24 months after making that determination. The bill would require, among other things, the written guidance or regulations to describe minimum performance standards for 3-dimensional printer firearm blocking technology before a printer can lawfully be sold or offered for sale in the state. If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for 3-dimensional printers, the bill would relieve the department of any further responsibility to ascertain whether ASTM International has published or adopted industry standards. The bill would make it unlawful to sell, offer for sale, or transfer for consideration, a 3-dimensional printer in the State of California that is not equipped with firearm blocking technology that also meets the above-described industry standards. The bill would exempt printers used exclusively for the manufacturing of properties (props) in the entertainment industry, and would authorize the department to adopt regulations that provide for additional exceptions to these provisions.
This bill would also exempt a person who distributes, or causes the distribution of, digital firearm manufacturing code, solely for the bona fide purpose of, among other things, developing, refining, and testing the functionality of a firearm blocking technology from civil liability.
This bill would make these provisions severable.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
Existing law authorizes a civil action against a person who knowingly distributes or causes to be distributed any digital firearm manufacturing code to any person, except as specified. Existing law authorizes the Attorney General, county counsel, or city attorney to bring an action against this person and seek a civil penalty, as specified, for each violation, as well as injunctive relief.
This bill would require the Department of Justice to check on a quarterly basis beginning no later than July 1, 2027, whether ASTM International has published industry standards for firearm blocking technology for 3-dimensional printers. equipping 3-dimensional printers with firearm blocking technology. The bill would require, if the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for 3-dimensional printers, that the department publish written guidance or regulations within 24 months after making that determination. The bill would require, among other things, the written guidance or regulations to describe minimum performance standards for 3-dimensional printer firearm blocking technology necessary to safely, fairly, and effectively implement the technology at a state level. before a printer can lawfully be sold or offered for sale in the state. If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for 3-dimensional printers, the bill would relieve the department of any further responsibility to ascertain whether ASTM International has published or adopted industry standards. The bill would make it unlawful to sell, offer for sale, or transfer for consideration, a 3-dimensional printer in the State of California that is not equipped with firearm blocking technology that also meets the above-described industry standards. The bill would exempt printers used exclusively for the manufacturing of properties (props) in the entertainment industry, and would authorize the department to adopt regulations that provide for additional exceptions to these provisions.
This bill would also exempt a person who distributes, or causes the distribution of, digital firearm manufacturing code, solely for the bona fide purpose of, among other things, developing, refining, and testing the functionality of a firearm blocking technology from civil liability.
This bill would make these provisions severable.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
This bill would require, on or before September 1, 2028, the department to publish written guidance on performance standards for firearm blueprint detection algorithm for use by 3-dimensional printer manufacturers, as specified.This bill would require, on or before March 1, 2029, any business that produces or manufactures 3-dimensional printers for sale or transfer in California to submit to the department an attestation for each make and model of printer they intend to make available for sale or transfer in California, confirming, among other things, that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm. The bill would require, on or before June 1, 2029, the department to publish a list of all the makes and models of 3-dimensional printers whose manufacturers have submitted complete self-attestations and would require the department to update the list no less frequently than on a quarterly basis and to make the list available on the departments internet website. The bill, beginning on December 1, 2029, would prohibit the sale or transfer of 3-dimensional printers that are not equipped with firearm blocking technology and that are not listed on the departments list, except as specified. The bill would authorize a civil action to be brought against a person who sells, offers to sell, or transfers a printer without the firearm blocking technology.This bill would require the Department of Justice to check on a quarterly basis beginning no later than July 1, 2027, whether ASTM International has published industry standards for firearm blocking technology for 3-dimensional printers. The bill would require, if the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for 3-dimensional printers, that the department publish written guidance or regulations within 24 months after making that determination. The bill would require, among other things, the written guidance or regulations to describe minimum performance standards for 3-dimensional printer firearm blocking technology necessary to safely, fairly, and effectively implement the technology at a state level. If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for 3-dimensional printers, the bill would relieve the department of any further responsibility to ascertain whether ASTM International has published or adopted industry standards.
This bill would make these provisions severable.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
This bill would require, on or before September 1, 2028, the department to publish written guidance on performance standards for firearm blueprint detection algorithm for use by 3-dimensional printer manufacturers, as specified.
This bill would require, on or before March 1, 2029, any business that produces or manufactures 3-dimensional printers for sale or transfer in California to submit to the department an attestation for each make and model of printer they intend to make available for sale or transfer in California, confirming, among other things, that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm. The bill would require, on or before June 1, 2029, the department to publish a list of all the makes and models of 3-dimensional printers whose manufacturers have submitted complete self-attestations and would require the department to update the list no less frequently than on a quarterly basis and to make the list available on the departments internet website. The bill, beginning on December 1, 2029, would prohibit the sale or transfer of 3-dimensional printers that are not equipped with firearm blocking technology and that are not listed on the departments list, except as specified. The bill would authorize a civil action to be brought against a person who sells, offers to sell, or transfers a printer without the firearm blocking technology.
This bill would also make it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a 3-dimensional printer identified on the Department of Justices list of 3-dimensional printers eligible for sale in California, with the intent to facilitate the unlawful manufacture of firearms. By creating a new crime, this bill would impose a state-mandated local program.This bill would make these provisions severable.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.This bill would provide that no reimbursement is required by this act for a specified reason.Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
This bill would require the Department of Justice or other relevant state agency to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms, as defined. TheThis bill would require, on or before January September 1, 2028, the department or other relevant state agency to publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithm for use by 3-dimensional printer manufacturers, as specified. The bill would, on or before March 1, 2028, require the department or other relevant state agency to publish written guidance on how to equip 3-dimensional printers with firearm blocking technology, as defined, and would require the performance standards to be publicly available on the department or other relevant state agencys internet website.
This bill would require, on or before July 1, 2028, March 1, 2029, any business that produces or manufactures 3-dimensional printers for sale or transfer in California to submit to the department an attestation for each make and model of printer they intend to make available for sale or transfer in California, confirming, among other things, that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm. The bill would require, on or before September 1, 2028, June 1, 2029, the department to publish a list of all the makes and models of 3-dimensional printers whose manufacturers have submitted complete self-attestations and would require the department to update the list no less frequently than on a quarterly basis and to make the list available on the departments internet website. The bill, beginning on March December 1, 2029, would prohibit the sale or transfer of 3-dimensional printers that are not equipped with firearm blocking technology and that are not listed on the departments list of manufacturers with a certificate of compliance verification, list, except as specified. The bill would authorize a civil action to be brought against a person who sells, offers to sell, or transfers a printer without the firearm blocking technology.
This bill would also make it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a 3-dimensional printer identified on the Department of Justices list of 3-dimensional printers eligible for sale in California, with the intent to facilitate the unlawful manufacture of firearms. By creating a new crime, this bill would impose a state-mandated local program.
This bill would make these provisions severable.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
This bill would require the Department of Justice or other relevant state agency to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms, as defined. The bill would require, on or before July 1, 2027, January 1, 2028, the department or other relevant state agency to publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithm to be certified for use by 3-dimensional printer manufacturers, as specified. The bill would require the department or other relevant state agency that prepared the written guidance on performance standards to accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards on or before January 1, 2028, and would specify the grounds for revocation of certification pursuant to these provisions. The bill would would, on or before March 1, 2028, require the department or other relevant state agency to publish written guidance on how to equip 3-dimensional printers with firearm blocking technology, as defined, and would require the performance standards to be publicly available on the department or other relevant state agencys internet website.
This bill would require, on or before July 1, 2028, any business that produces or manufactures 3-dimensional printers for sale or transfer in California to submit to the department an attestation for each make and model of printer they intend to make available for sale or transfer in California, confirming, among other things, that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm. If the department verifies a printer make and model is properly equipped, the bill would require the department to issue a notice of compliance, as specified. The bill would require, on or before September 1, 2028, the department to publish a list of all the makes and models of 3-dimensional printers whose manufacturers have submitted complete self-attestations and would require the department to update the list no less frequently than on a quarterly basis and to make the list available on the departments internet website. The bill, beginning on March 1, 2029, would prohibit the sale or transfer of 3-dimensional printers that are not equipped with firearm blocking technology and that are not listed on the departments list of manufacturers with a certificate of compliance verification, except as specified. The bill would authorize a civil action to be brought against a person who sells, offers to sell, or transfers a printer without the firearm blocking technology.
This bill would also make it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a 3-dimensional printer identified on the Department of Justices list of 3-dimensional printers eligible for sale in California. California, with the intent to facilitate the unlawful manufacture of firearms. By creating a new crime, this bill would impose a state-mandated local program.
This bill would make these provisions severable.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law makes it a crime to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3-dimensional printer, as specified.
This bill would require the Department of Justice or other relevant state agency to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms, as defined. The bill would require, on or before July 1, 2027, the department or other relevant state agency to publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithm to be certified for use by 3-dimensional printer manufacturers, as specified. The bill would require the department or other relevant state agency that prepared the written guidance on performance standards to accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards on or before January 1, 2028, and would specify the grounds for revocation of certification pursuant to these provisions. The bill would require the department or other relevant state agency to publish written guidance on how to equip 3-dimensional printers with firearm blocking technology, as defined, and would require the performance standards to be publicly available on the department or other relevant state agencys website.
This bill would require, on or before July 1, 2028, any business that produces or manufactures 3-dimensional printers for sale or transfer in California to submit to the department an attestation for each make and model of printer they intend to make available for sale or transfer in California, confirming, among other things, that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm. If the department verifies a printer make and model is properly equipped, the bill would require the department to issue a notice of compliance, as specified. The bill would require, on or before September 1, 2028, the department to publish a list of all the makes and models of 3-dimensional printers whose manufacturers have submitted complete self-attestations and would require the department to update the list no less frequently than on a quarterly basis and to make the list available on the departments internet website. The bill, beginning on March 1, 2029, would prohibit the sale or transfer of 3-dimensional printers that are not equipped with firearm blocking technology and that are not listed on the departments list of manufacturers with a certificate of compliance verification, except as specified. The bill would authorize a civil action to be brought against a person who sells, offers to sell, or transfers a printer without the firearm blocking technology.
This bill would also make it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3-dimensional printer with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of a 3-dimensional printer identified on the Department of Justices list of 3-dimensional printers eligible for sale in California. By creating a new crime, this bill would impose a state-mandated local program.
This bill would make these provisions severable.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)ASTM International means ASTM International, formerly American Society for Testing and Materials.
(b)Department means the Department of Justice.
(c)Firearm has the same meaning as defined in subdivisions (a) and (b) of Section 16520 of the Penal Code.
(d)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or a machine gun conversion device.
(e)Machine gun conversion device means a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun. The term includes a pistol converter as defined in Section 17015 of the Penal Code.
(f)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)Beginning no later than July 1, 2027, and quarterly thereafter, the department shall check whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology.
(b)If the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers, and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, all of the following shall apply:
(1)The department shall publish written guidance or regulations within 24 months after determining that ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
(2)The written guidance or regulations shall describe minimum performance standards for firearm blocking technology that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. In accordance with the Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code), the written guidance or regulations shall be developed in consultation with stakeholders.
(3)The departments written guidance or regulations shall be informed by the ASTM International industry standards and may incorporate some or all of the ASTM International industry standards.
(4)The departments guidance or regulations may provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of this title.
(5)The departments written guidance or regulations may consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside California, as applicable.
(6)The departments written guidance or regulations may provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers are required to certify to the department that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the department.
(c)Commencing one year after the department has published written guidance or regulations for firearm blocking technology pursuant to subdivision (b), both of the following shall apply:
(1)Before a manufacturer of any three-dimensional printer sells, offers to sell, or transfers for consideration a three-dimensional printer to any person or business in California, the manufacturer shall ensure that the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(2)It shall be unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in the State of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(d)This section does not apply to printers used exclusively for the manufacturing of properties (props) in the entertainment industry.
(e)Section 3273.61 does not apply to a person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined in Section 3273.60, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
(f)If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the department shall not be required to make any further determinations under this section.
3273.634.(a)The department may promulgate regulations and develop forms and publications to implement this title.
(b)The department may update the minimum performance standards adopted pursuant to this title, including to reflect any future updates ASTM International makes to the industry standards described in Section 3273.633. The department may also adopt regulations that provide for additional exceptions to this title, if those exceptions are consistent with the purpose of this title to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
SEC. 2.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)ASTM International means ASTM International, formerly American Society for Testing and Materials.
(b)Department means the Department of Justice.
(c)Firearm has the same meaning as defined in subdivisions (a) and (b) of Section 16520 of the Penal Code.
(d)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or a machine gun conversion device.
(e)Machine gun conversion device means a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun. The term includes a pistol converter as defined in Section 17015 of the Penal Code.
(f)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)Beginning no later than July 1, 2027, and quarterly thereafter, the department shall check whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology.
(b)If the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers, and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, all of the following shall apply:
(1)The department shall publish written guidance or regulations within 24 months after determining that ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
(2)The written guidance or regulations shall describe minimum performance standards for firearm blocking technology that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. In accordance with the Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code), the written guidance or regulations shall be developed in consultation with stakeholders.
(3)The departments written guidance or regulations shall be informed by the ASTM International industry standards and may incorporate some or all of the ASTM International industry standards.
(4)The departments guidance or regulations may provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of this title.
(5)The departments written guidance or regulations may consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside California, as applicable.
(6)The departments written guidance or regulations may provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers are required to certify to the department that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the department.
(c)Commencing one year after the department has published written guidance or regulations for firearm blocking technology pursuant to subdivision (b), both of the following shall apply:
(1)Before a manufacturer of any three-dimensional printer sells, offers to sell, or transfers for consideration a three-dimensional printer to any person or business in California, the manufacturer shall ensure that the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(2)It shall be unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in the State of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(d)This section does not apply to printers used exclusively for the manufacturing of properties (props) in the entertainment industry.
(e)Section 3273.61 does not apply to a person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined in Section 3273.60, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
(f)If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the department shall not be required to make any further determinations under this section.
3273.634.(a)The department may promulgate regulations and develop forms and publications to implement this title.
(b)The department may update the minimum performance standards adopted pursuant to this title, including to reflect any future updates ASTM International makes to the industry standards described in Section 3273.633. The department may also adopt regulations that provide for additional exceptions to this title, if those exceptions are consistent with the purpose of this title to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
SEC. 2.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)ASTM International means ASTM International, formerly American Society for Testing and Materials.
(b)Department means the Department of Justice.
(c)Firearm has the same meaning as defined in subdivision subdivisions (a) and (b) of Section 16520 of the Penal Code.
(d)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts. a machine gun conversion device.
(e)Machine gun conversion device means a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun. The term includes a pistol converter as defined in Section 17015 of the Penal Code.
(e)(f)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)Beginning no later than July 1, 2027, and quarterly thereafter, the department shall check whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology for three-dimensional printers. technology.
(a)(b)If the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers, and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, all of the following shall apply:
(1)The department shall publish written guidance or regulations within 24 months after determining that ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
(2)The written guidance or regulations shall describe minimum performance standards for three-dimensional printer firearm blocking technology necessary to safely, fairly, and effectively implement the technology at a statewide level. that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. In accordance with the Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code), the written guidance or regulations shall be developed in consultation with stakeholders.
(3)The departments written guidance or regulations shall be informed by the ASTM International industry standards and may incorporate some or all of the ASTM International industry standards.
(4)The departments guidance or regulations may provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of this title.
(5)The departments written guidance or regulations may consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside California, as applicable.
(6)The departments written guidance or regulations shall include both of the following requirements:(6)The departments written guidance or regulations may provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers are required to certify to the department that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the department.
(c)Commencing one year after the department has published written guidance or regulations for firearm blocking technology pursuant to subdivision (b), both of the following shall apply:
(A)(1)Before a manufacturer of any three-dimensional printer is offered, sold, transferred, or distributed sells, offers to sell, or transfers for consideration a three-dimensional printer to any person or business in California, the manufacturer shall equip ensure that the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(B)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit to the department a self-attestation confirming the installation and functionality of firearm blocking technology on the three-dimensional printer.(2)It shall be unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in the State of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the departments guidance or regulations.
(d)This section does not apply to printers used exclusively for the manufacturing of properties (props) in the entertainment industry.
(e)Section 3273.61 does not apply to a person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined in Section 3273.60, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
(b)(f)If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the department shall not be required to make any further determinations under this section.
3273.634.(a)The department may promulgate regulations and develop forms and publications to implement this title.
(b)The department may update the minimum performance standards adopted pursuant to this title, including to reflect any future updates ASTM International makes to the industry standards described in Section 3273.633. The department may also adopt regulations that provide for additional exceptions to this title, if those exceptions are consistent with the purpose of this title to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
SEC. 2.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)ASTM International means ASTM International, formerly American Society for Testing and Materials.
(a)(b)Department means the Department of Justice.
(b)(c)Firearm has the same meaning as defined in subdivision (a) of Section 16520 of the Penal Code.
(c)(d)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(d)Firearm blueprint detection algorithm means a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.(e)Firearm precursor part has the same meaning as defined in Section 16531 of the Penal Code.(f)Firmware design means integration of a firearms blueprint detection algorithm directly into a three-dimensional printers firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.(g)Illegal firearm parts means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.(h)Integrated pre-print software design means a limitation of a three-dimensional printers operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturers proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.(i)Pistol convertor has the same meaning as defined in Section 17015 of the Penal Code.(j)Software controls process means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.(k)(e)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)(1)On or before September 1, 2028, the department shall publish written guidance on performance standards for firearm blueprint detection algorithms for three-dimensional printer manufacturer use in complying with Sections 3273.635 and 3272.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.(2)The department may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.(b)The performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:(1)Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.(2)Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.(3)Flag any disallowed files for print rejection by a software control process.(c)The performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly shared on internet forums to detect those files and modified versions of those files.(1)In order to meet the requirements of this subdivision, the standards may require blueprint detection algorithms to receive updated information from an inventory of firearm blueprint files and illegal firearm parts blueprint files, including, but not limited to, a library maintained by any state agency or out-of-state agency, academic institution, or nongovernmental entity.(2)An individual with authorized access to a file library identified in paragraph (1) for the purpose of developing or vetting firearm blocking technology shall be immune from liability for violation of subdivision (a) of Section 3273.61 for reviewing or testing files in the file library. (d)The performance standards shall include standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a false-negative rate of zero corresponding to a perfect success rate at detecting disallowed files, using standardized test methodologies and benchmark datasets where applicable.(e)The performance standards shall require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency that reasonably considers the rate of innovation for the design and availability of new firearm blueprint files, consistent with evolving threat landscapes, technology maturity, and operational feasibility.(f)The performance standards shall include a process for periodically reviewing emerging detection software techniques, including, but not limited to, advanced forms of image recognition and volumetric search functionality.3273.634.(a)(1)On or before September 1, 2028, the department shall publish written guidance on performance standards for software controls processes for three-dimensional printer manufacturer use in complying with Sections 3273.635 and 3273.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.(2)The department may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.(b)The performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm.(c)The performance standards shall include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, but shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.(d)The performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including that the standards-setting process shall consider all of the following: (1)Firmware design.(2)Integrated preprint software design.(3)Any other form, including, but not limited to, handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the software controls process meets all performance requirements of the standard and is both of the following: (A)At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described in paragraphs (1) and (2).(B)At least as resistant to being defeated by a technically skilled user as the design forms described in paragraphs (1) and (2).(e)The performance standards shall include both of the following: (1)For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.(2)For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively through authorized and validated software systems and will not accept print jobs from unauthorized software pathways, including attempts by users seeking to evade a detection algorithm.3273.635.(a)(1)On or before March 1, 2029, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the department an attestation form for each make and model of printer they intend to make available for sale or transfer in California. (2)The self-attestation shall include all of the following information:(A)The make and model of the three-dimensional printer.(B)Confirmation that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm.(C)Confirmation that the manufacturer has equipped that make and model with a software controls process.(D)Confirmation of testing the functionality of the firearm blocking technology once installed according to paragraph (4).(3)If the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer. Any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list described in subdivision (b).(4)The self-attestation form may include instructions to manufacturers of three-dimensional printers on how to test functionality of firearm blocking technology, how to affirm that testing has occurred on a specified percentage of printers for each model, and how to submit the self-attestation form to the department.(b)(1)On or before June 1, 2029, the department shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations pursuant to subdivision (a) and any makes and models of three-dimensional printers that have an incomplete attestation on file.(2)The list shall be updated no less frequently than on a quarterly basis and made accessible on the departments internet website. Retailers or distributors of three-dimensional printers shall consult the list posted on the departments internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.(3)It shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of Section 3273.636 that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation. 3273.636.(a)Any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps: (1)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with firearm blocking technology, as described in Sections 3273.633 and 3273.634.(2)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described in Section 3273.635.(b)Any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the department described in subdivision (b) of Section 3273.635.(c)It shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:(1)The three-dimensional printer shall be equipped with firearm blocking technology.(2)The three-dimensional printer shall be listed by the department on the published list described in subdivision (b) of Section 3273.635 as having a complete attestation on file.(d)This section shall not apply to the following products: (1)Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined in subdivision (g) of Section 29185 of the Penal Code. (2)Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.(3)Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.(4)Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.(5)Printers sold or transferred in private transactions that were originally purchased before the publication of the list described in paragraph (1) of subdivision (b) of Section 3273.635.(e)A civil action may be brought against a person who does either of the following:(1)(A)Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology. (B)It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation. (2)Knowingly files an attestation in subdivision (a) of Section 3273.635 containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined in Section 118 of the Penal Code. (f)(1)A person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.(2)The Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.(3)A prevailing plaintiff shall be entitled to recover reasonable attorneys fees and costs.(g)The remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.(h)This section shall become operative on December 1, 2029.3273.633.Beginning no later than July 1, 2027, and quarterly thereafter, the department shall check whether ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
(a)If the department determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers, all of the following shall apply:
(1)The department shall publish written guidance or regulations within 24 months after determining that ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
(2)The written guidance or regulations shall describe minimum performance standards for three-dimensional printer firearm blocking technology necessary to safely, fairly, and effectively implement the technology at a statewide level. In accordance with the Administrative Procedure Act (Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code), the written guidance or regulations shall be developed in consultation with stakeholders.
(3)The departments written guidance or regulations shall be informed by the ASTM International industry standards and may incorporate some or all of the ASTM International industry standards.
(4)The departments guidance or regulations may provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of this title.
(5)The departments written guidance or regulations may consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside California, as applicable.
(6)The departments written guidance or regulations shall include both of the following requirements:
(A)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with firearm blocking technology that meets the minimum performance standards set forth in the guidance or regulations.
(B)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit to the department a self-attestation confirming the installation and functionality of firearm blocking technology on the three-dimensional printer.
(b)If, as of July 1, 2029, the department determines that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the department shall not be required to make any further determinations under this section.
3273.637.3273.634.The department may promulgate regulations and develop forms and publications to implement this title.
SEC. 2.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)Department means the Department of Justice.
(b)Firearm has the same meaning as defined in subdivision (a) of Section 16520 of the Penal Code.
(c)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(d)Firearm blueprint detection algorithm means a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
(e)Firearm precursor part has the same meaning as defined in Section 16531 of the Penal Code.
(f)Firmware design means integration of a firearms blueprint detection algorithm directly into a three-dimensional printers firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(g)Illegal firearm parts means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
(h)Integrated pre-print software design means a limitation of a three-dimensional printers operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturers proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(i)Pistol convertor has the same meaning as defined in Section 17015 of the Penal Code.
(j)Software controls process means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(k)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)(1)On or before September 1, 2028, the department shall publish written guidance on performance standards for firearm blueprint detection algorithms for three-dimensional printer manufacturer use in complying with Sections 3273.635 and 3272.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.
(2)The department may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.
(b)The performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
(1)Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
(2)Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
(3)Flag any disallowed files for print rejection by a software control process.
(c)The performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly shared on internet forums to detect those files and modified versions of those files.
(1)In order to meet the requirements of this subdivision, the standards may require blueprint detection algorithms to receive updated information from an inventory of firearm blueprint files and illegal firearm parts blueprint files, including, but not limited to, a library maintained by any state agency or out-of-state agency, academic institution, or nongovernmental entity.
(2)An individual with authorized access to a file library identified in paragraph (1) for the purpose of developing or vetting firearm blocking technology shall be immune from liability for violation of subdivision (a) of Section 3273.61 for reviewing or testing files in the file library.
(d)The performance standards shall include standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a false-negative rate of zero corresponding to a perfect success rate at detecting disallowed files, using standardized test methodologies and benchmark datasets where applicable.
(e)The performance standards shall require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency that reasonably considers the rate of innovation for the design and availability of new firearm blueprint files, consistent with evolving threat landscapes, technology maturity, and operational feasability. feasibility.
(f)The performance standards shall include a process for periodically reviewing emerging detection software techniques, including, but not limited to, advanced forms of image recognition and volumetric search functionality.
3273.634.(a)(1)On or before September 1, 2028, the department shall publish written guidance on performance standards for software controls processes for three-dimensional printer manufacturer use in complying with Sections 3273.635 and 3273.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.
(2)The department may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
(b)The performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm.
(c)The performance standards shall include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, but shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
(d)The performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including that the standards-setting process shall consider all of the following:
(1)Firmware design.
(2)Integrated preprint software design.
(3)Any other form, including, but not limited to, handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the software controls process meets all performance requirements of the standard and is both of the following:
(A)At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described in paragraphs (1) and (2).
(B)At least as resistant to being defeated by a technically skilled user as the design forms described in paragraphs (1) and (2).
(e)The performance standards shall include both of the following:
(1)For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
(2)For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively through authorized and validated software systems and will not accept print jobs from unauthorized software pathways, including attempts by users seeking to evade a detection algorithm.
3273.635.(a)(1)On or before March 1, 2029, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the department an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
(2)The self-attestation shall include all of the following information:
(A)The make and model of the three-dimensional printer.
(B)Confirmation that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm.
(C)Confirmation that the manufacturer has equipped that make and model with a software controls process.
(D)Confirmation of testing the functionality of the firearm blocking technology once installed according to paragraph (4).
(3)If the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer. Any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list described in subdivision (b).
(4)The self-attestation form may include instructions to manufacturers of three-dimensional printers on how to test functionality of firearm blocking technology, how to affirm that testing has occurred on a specified percentage of printers for each model, and how to submit the self-attestation form to the department.
(b)(1)On or before June 1, 2029, the department shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations pursuant to subdivision (a) and any makes and models of three-dimensional printers that have an incomplete attestation on file.
(2)The lists list shall be updated no less frequently than on a quarterly basis and made accessible on the departments internet website. Retailers or distributors of three-dimensional printers shall consult the lists list posted on the departments internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
(3)It shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of Section 3273.636 that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
3273.636.(a)Any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
(1)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with firearm blocking technology, as described in Sections 3273.633 and 3273.634.
(2)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described in Section 3273.635.
(b)Any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the department described in subdivision (b) of Section 3273.635.
(c)It shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
(1)The three-dimensional printer shall be equipped with firearm blocking technology.
(2)The three-dimensional printer shall be listed by the department on the published list described in subdivision (b) of Section 3273.635 as having a complete attestation on file.
(d)This section shall not apply to the following products:
(1)Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined in subdivision (g) of Section 29185 of the Penal Code.
(2)Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
(3)Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
(4)Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
(5)Printers sold or transferred in private transactions that were originally purchased before the publication of the list described in paragraph (1) of subdivision (b) of Section 3273.635.
(e)A civil action may be brought against a person who does either of the following:
(1)(A)Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
(B)It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
(2)Knowingly files an attestation in subdivision (a) of Section 3273.635 containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined in Section 118 of the Penal Code.
(f)(1)A person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(2)The Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(3)A prevailing plaintiff shall be entitled to recover reasonable attorneys fees and costs.
(g)The remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
(h)This section shall become operative on December 1, 2029.
3273.637.The department may promulgate regulations and develop forms and publications to implement this title.
SEC. 2.Section 29187 is added to the Penal Code, to read:29187.(a)It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justices list of three-dimensional printers eligible for sale in California, as described in Section 3273.635 of the Civil Code, with the intent to facilitate the unlawful manufacture of firearms, as defined in Section 29186.(b)A violation of this section is a misdemeanor.(c)This section does not preclude prosecution under any other law providing for a greater penalty.SEC. 3.SEC. 2.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
SEC. 4.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)Department means the Department of Justice.
(b)Firearm has the same meaning as defined in subdivision (a) of Section 16520 of the Penal Code.
(c)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(d)Firearm blueprint detection algorithm means a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
(e)Firearm precursor part has the same meaning as defined in Section 16531 of the Penal Code.
(f)Firmware design means integration of a firearms blueprint detection algorithm directly into a three-dimensional printers firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(g)Illegal firearm parts means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
(h)Integrated pre-print software design means a limitation of a three-dimensional printers operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturers proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(i)Pistol convertor has the same meaning as defined in Section 17015 of the Penal Code.
(j)Software controls process means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(k)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)The department or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms. The department or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency, academic consortium, or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.(b)3273.633.(a)(1)On or before January September 1, 2028, the department or other relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637. 3273.635 and 3272.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.
(2)The department or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.
(3)(b)The performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
(A)(1)Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
(B)(2)Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
(C)(3)Flag any disallowed files for print rejection by a software control process.
(4)(c)The performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
(1)In order to meet the requirements of this subdivision, the standards may require blueprint detection algorithms to receive updated information from an inventory of firearm blueprint files and illegal firearm parts blueprint files, including, but not limited to, a library maintained by any state agency or out-of-state agency, academic institution, or nongovernmental entity.
(2)An individual with authorized access to a file library identified in paragraph (1) for the purpose of developing or vetting firearm blocking technology shall be immune from liability for violation of subdivision (a) of Section 3273.61 for reviewing or testing files in the file library.
(5)(d)The department or other relevant state agency shall set performance standards shall include standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a false-negative rate of zero corresponding to perfect success rate at detecting disallowed files. files, using standardized test methodologies and benchmark datasets where applicable.
(6)(e)The department or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring shall require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for reasonably considers the rate of innovation for the design and availability of new firearm blueprint files. files, consistent with evolving threat landscapes, technology maturity, and operational feasability.
(7)(f)The department or other relevant state agency preparing the written guidance on performance standards shall include a process for periodically review reviewing emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as and volumetric search functionality. If, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithm developers, the department or other relevant agency shall issue an update to the written guidance on performance standards.
(8)The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.3273.634.(a)The department or relevant state agency shall engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.(b)3273.634.(a)(1)On or before January September 1, 2028, the department or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637. 3273.635 and 3273.636. The department may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit, including, for example, ASTM International. To the extent performance standards created by a nongovernmental entity meet all the requirements set forth in this section, the departments performance standards may provide that compliance with the nongovernmental entitys standards shall constitute compliance with this title.
(2)The department or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
(3)(b)The performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm.
(4)(c)The department performance standards shall set include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, but shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
(5)(d)The performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including that the standards-setting process shall consider all of the following:
(A)(1)Firmware design.
(B)(2)Integrated preprint software design.
(C)(3)Any other form, including, but not limited to, handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the department first determines that the software controls process meets all performance requirements of the standard and is both of the following:
(i)(A)At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described in subparagraphs (A) and (B). paragraphs (1) and (2).
(ii)(B)At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B). paragraphs (1) and (2).
(6)(e)The written guidance performance standards shall include both of the following:
(A)(1)For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
(B)(2)For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software through authorized and validated software systems and will not accept print jobs from any other preprint software, including from a user unauthorized software pathways, including attempts by users seeking to evade a detection algorithm.
(7)The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.3273.635.(a)On or before March 1, 2028, the department or other relevant state agency shall publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include performance standards on how to test functionality of the firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.(b)The performance standards described in subdivision (a) shall be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section. 3273.636.3273.635.(a)(1)On or before July 1, 2028, March 1, 2029, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the department an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
(2)The self-attestation shall include all of the following information:
(A)The make and model of the three-dimensional printer.
(B)Confirmation that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm.
(C)Confirmation that the manufacturer has equipped that make and model with a software controls process.
(D)Confirmation of testing the functionality of the firearm blueprint detection algorithm and software controls process blocking technology once installed according to performance standards issued by the department pursuant to Section 3273.635. paragraph (4).
(3)If the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer. Any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list described in subdivision (b).
(4)The self-attestation form may include instructions to manufacturers of three-dimensional printers on how to test functionality of firearm blocking technology, how to affirm that testing has occurred on a specified percentage of printers for each model, and how to submit the self-attestation form to the department.
(b)(1)On or before September 1, 2028, June 1, 2029, the department shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations pursuant to subdivision (a) and any makes and models of three-dimensional printers that have an incomplete attestation on file.
(2)The lists shall be updated no less frequently than on a quarterly basis and made accessible on the departments internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the departments internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
(3)It shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of Section 3273.637 3273.636 that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
3273.637.3273.636.(a)Any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
(1)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described in Sections 3273.633 and 3273.634.
(2)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described in Section 3273.636. 3273.635.
(b)Any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the department described in subdivision (b) of Section 3273.636. 3273.635.
(c)It shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
(1)The three-dimensional printer shall be equipped with firearm blocking technology.
(2)The three-dimensional printer shall be listed by the department on the published list described in subdivision (b) of Section 3273.636 3273.635 as having a complete attestation on file.
(d)This section shall not apply to the following products:
(1)Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined in subdivision (g) of Section 29185 of the Penal Code.
(2)Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
(3)Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
(4)Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
(5)Printers sold or transferred in private transactions that were originally purchased before the publication of the list described in paragraph (1) of subdivision (b) of Section 3273.635.
(e)A civil action may be brought against a person who does either of the following:
(1)(A)Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
(B)It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
(2)Knowingly files an attestation in subdivision (a) of Section 3273.636 3273.635 containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined in Section 118 of the Penal Code.
(f)(1)A person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(2)The Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(3)A prevailing plaintiff shall be entitled to recover reasonable attorneys fees and costs.
(g)The remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
(h)This section shall become operative on March December 1, 2029.
3273.638.3273.637.The department may promulgate regulations and develop forms and publications necessary to implement this title.
SEC. 2.Section 29187 is added to the Penal Code, to read:29187.(a)It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justices list of three-dimensional printers eligible for sale in California, as described in Section 3273.636 3273.635 of the Civil Code, with the intent to facilitate the unlawful manufacture of firearms, as defined in Section 29186.
(b)A violation of this section is a misdemeanor.
(c)This section does not preclude prosecution under any other law providing for a greater penalty.
SEC. 3.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
SEC. 4.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)Department means the Department of Justice.
(b)Firearm has the same meaning as defined in subdivision (a) of Section 16520 of the Penal Code.
(c)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(d)Firearm blueprint detection algorithm means a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
(e)Firearm precursor part has the same meaning as defined in Section 16531 of the Penal Code.
(f)Firmware design means integration of a firearms blueprint detection algorithm directly into a three-dimensional printers firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(g)Illegal firearm parts means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
(h)Integrated pre-print software design means a limitation of a three-dimensional printers operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturers proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(i)Pistol convertor has the same meaning as defined in Section 17015 of the Penal Code.
(j)Software controls process means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(k)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)The department or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms. The department or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency agency, academic consortium, or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
(b)(1)On or before July 1, 2027, January 1, 2028, the department or other relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637.
(2)The department or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.
(3)The performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
(A)Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
(B)Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
(C)Flag any disallowed files for rejection by a software control process.
(4)The performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
(5)The department or other relevant state agency shall set standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files.
(6)The department or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files.
(7)The department or other relevant state agency preparing the written guidance on performance standards shall periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality. If, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified under subdivision (c), the department or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique. Any vendor with a previously qualified algorithm who is required to make that update shall have a reasonable period of time, not less than three months, to update their previously qualified algorithm. algorithm developers, the department or other relevant agency shall issue an update to the written guidance on performance standards.
(8)The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
(c)(1)On or before January 1, 2028, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards described in subdivision (b).(2)For purposes of evaluating applications for firearm blueprint detection algorithm certification, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall require applicants to satisfy both of the following:(A)Identify the inventory of firearm blueprint files used to design the algorithm so that the department or other relevant state agency evaluating applicants may assess and confirm that the file inventory is sufficiently thorough.(B)Provide access for testing, as well as schematics or other detailed explanation of their technology sufficient for the department or other relevant state agency evaluating applicants to evaluate its suitability for certification.(3)The list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.(d)The department or other relevant state agency issuing certification shall revoke certification for a firearms blueprint detection algorithm if, at any time, it fails to meet the performance standards for certification, including, without limitation, failure by a certified algorithm to implement regular updates to its inventory of disallowed files as required by the department or relevant state agency, or to update its technology to match the state-of-the-art performance of an emerging detection technique as required by the department in paragraph (7) of subdivision (b). In the event of a revocation pursuant to this section, the department or relevant state agency shall notify relevant printer manufacturers with printer models known to use that algorithm that an algorithm they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described in Section 3273.636.3273.634.(a)The department or relevant state agency shall engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
(b)(1)On or before July 1, 2027, January 1, 2028, the department or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes to be certified for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637.
(2)The department or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
(3)The performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
(4)The department shall set minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, but shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
(5)The performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
(A)Firmware design.
(B)Integrated preprint software design.
(C)Any other form, including, but not limited to, handshake authentication design, design or other design forms directed towards compatibility with open-source architecture, if the department first determines that the software controls process is both of the following:
(i)At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described in subparagraphs (A) and (B).
(ii)At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B).
(6)The written guidance shall include both of the following:
(A)For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
(B)For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
(7)The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
(c)On or before January 1, 2028, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards described in subdivision (b).(d)For purposes of evaluating applications for certification, the department or other relevant state agency evaluating applicants shall require applicants to provide software and hardware, as applicable, for testing by regulators, as well as schematics or other detailed explanation of their technology sufficient for the department to evaluate its suitability for certification.(e)The list of software controls processes that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.(f)The department or other state agency that issued certification shall revoke certification for a software controls process if, at any time, it fails to meet the performance standards for certification. In that case, the department or other state agency that issued certification shall notify relevant printer manufacturers with printer models known to use that software controls process that a software controls process they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described in Section 3273.636.3273.635.(a)On or before March 1, 2028, the department or other relevant state agency shall publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include all of the following: performance standards on how to test functionality of the firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
(1)Performance standards for equipping three-dimensional printers with a certified firearm blueprint detection algorithm and where to find updated lists of certified firearm blueprint detection algorithms published by the department.(2)Performance standards for equipping three-dimensional printers with a certified software controls process and where to find updated lists of certified software controls processes published by the department.(3)Performance standards on how to test functionality of the certified firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.(b)The performance standards described in subdivision (a) shall be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section.
3273.636.(a)(1)On or before July 1, 2028, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the department an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
(2)The self-attestation shall include all of the following information:
(A)The make and model of the three-dimensional printer.
(B)Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm and which certified firearm blueprint detection algorithm from the list published pursuant to Section 3273.633 was used. algorithm.
(C)Confirmation that the manufacturer has equipped that make and model with a certified software controls process and which certified software controls process from the list published pursuant to Section 3273.634 was used. software controls process.
(D)Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the department pursuant to Section 3273.635.
(3)If the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance. compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer. Any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list described in subdivision (c). (b).
(b)(1)On or before July 1, 2028, the department shall begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the department to inspect and confirm that a specific make and model of printer complies with the performance standards described in subdivision (a). (2)If the department verifies a printer make and model is properly equipped with firearm blocking technology, the department shall issue to the manufacturer a written notice of compliance verification for the make and model, which shall constitute compliance with subdivision (a) of Section 3273.637. (3)No manufacturer of a printer for which a written notice of compliance verification has been issued under this subdivision shall be subject to civil actions under Section 3273.637. This subdivision does not apply to a manufacturer who received notice from the department that the previously verified model contained a firearms blueprint detection algorithm for which certification was revoked pursuant to subdivision (d) of Section 3273.633 or a software controls process for which certification was revoked under subdivision (d) of Section 3273.634, until the manufacturer updates their model and resubmits the model for an updated compliance verification. (c)(b)(1)On or before September 1, 2028, the department shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations pursuant to subdivision (a), (a) and any makes and models of three-dimensional printers that have an incomplete attestation on file, any makes and models that have submitted for and received the voluntary compliance verification described in subdivision (b), and any makes and models that have a pending submission for voluntary compliance verification under subdivision (b). file.
(2)The lists shall be updated no less frequently than on a quarterly basis and made accessible on the departments internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the departments internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
(3)It shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of Section 3273.637 that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
3273.637.(a)Any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
(1)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described in Sections 3273.633 and 3273.634.
(2)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described in Section 3273.636.
(b)Any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the department described in subdivision (c) (b) of Section 3273.636.
(c)It shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
(1)The three-dimensional printer shall be equipped with firearm blocking technology.
(2)The three-dimensional printer shall be listed by the department on the published list described in subdivision (c) (b) of Section 3273.636 as having a complete attestation on file, having received a certificate of compliance verification, or having a pending application for a certificate of compliance verification. file.
(d)This section shall not apply to the following products:
(1)Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined in subdivision (g) of Section 29185 of the Penal Code.
(2)Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
(3)Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
(4)Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
(e)A civil action may be brought against a person who does either of the following:
(1)(A)Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
(B)It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
(C)It shall be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.(2)Knowingly files an attestation in subdivision (a) of Section 3273.636 containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined in Section 118 of the Penal Code.
(f)(1)A person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(2)The Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(3)A prevailing plaintiff shall be entitled to recover reasonable attorneys fees and costs.
(g)The remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
(h)This section shall become operative on March 1, 2029.
3273.638.The department may promulgate regulations and develop forms and publications necessary to implement this title.
SEC. 2.Section 29187 is added to the Penal Code, to read:29187.(a)It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justices list of three-dimensional printers eligible for sale in California, as described in Section 3273.636 of the Civil Code. Code, with the intent to facilitate the unlawful manufacture of firearms, as defined in Section 29186.
(b)A violation of this section is a misdemeanor.
(c)This section does not preclude prosecution under any other law providing for a greater penalty.
SEC. 3.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
SEC. 4.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
This title shall be known, and may be cited, as the California Firearm Printing Prevention Act.
3273.632.As used in this title, the following definitions shall apply:
(a)Department means the Department of Justice.
(b)Firearm has the same meaning as defined in subdivision (a) of Section 16520 of the Penal Code.
(c)Firearm blocking technology means hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(d)Firearm blueprint detection algorithm means a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
(e)Firearm precursor part has the same meaning as defined in Section 16531 of the Penal Code.
(f)Firmware design means integration of a firearms blueprint detection algorithm directly into a three-dimensional printers firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(g)Illegal firearm parts means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
(h)Integrated pre-print software design means a limitation of a three-dimensional printers operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturers proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
(i)Pistol convertor has the same meaning as defined in Section 17015 of the Penal Code.
(j)Software controls process means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
(k)Three-dimensional printer has the same meaning as subdivision (d) of Section 3273.60.
3273.633.(a)The department or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms. The department or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
(b)(1)On or before July 1, 2027, the department or other relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637.
(2)The department or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms.
(3)The performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
(A)Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
(B)Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
(C)Flag any disallowed files for rejection by a software control process.
(4)The performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
(5)The department or other relevant state agency shall not require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files.
(6)The department or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files.
(7)The department or other relevant state agency preparing the written guidance on performance standards shall periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality. If, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified under subdivision (c), the department or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique. Any vendor with a previously qualified algorithm who is required to make that update shall have a reasonable period of time, not less than three months, to update their previously qualified algorithm.
(c)(1)On or before January 1, 2028, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards described in subdivision (b).
(2)For purposes of evaluating applications for firearm blueprint detection algorithm certification, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall require applicants to satisfy both of the following:
(A)Identify the inventory of firearm blueprint files used to design the algorithm so that the department or other relevant state agency evaluating applicants may assess and confirm that the file inventory is sufficiently thorough.
(B)Provide access for testing, as well as schematics or other detailed explanation of their technology sufficient for the department or other relevant state agency evaluating applicants to evaluate its suitability for certification.
(3)The list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.
(d)The department or other relevant state agency issuing certification shall revoke certification for a firearms blueprint detection algorithm if, at any time, it fails to meet the performance standards for certification, including, without limitation, failure by a certified algorithm to implement regular updates to its inventory of disallowed files as required by the department or relevant state agency, or to update its technology to match the state-of-the-art performance of an emerging detection technique as required by the department in paragraph (7) of subdivision (b). In the event of a revocation pursuant to this section, the department or relevant state agency shall notify relevant printer manufacturers with printer models known to use that algorithm that an algorithm they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described in Section 3273.636.
3273.634.(a)The department or relevant state agency shall engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
(b)(1)On or before July 1, 2027, the department or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes to be certified for three-dimensional printer manufacturer use in complying with Sections 3273.636 and 3273.637.
(2)The department or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
(3)The performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
(4)The department shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
(5)The performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
(A)Firmware design.
(B)Integrated preprint software design.
(C)Any other form, including, but not limited to, handshake authentication design, if the department first determines that the software controls process is both of the following:
(i)At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described in subparagraphs (A) and (B).
(ii)At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B).
(6)The written guidance shall include both of the following:
(A)For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
(B)For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
(c)On or before January 1, 2028, the department or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards described in subdivision (b).
(d)For purposes of evaluating applications for certification, the department or other relevant state agency evaluating applicants shall require applicants to provide software and hardware, as applicable, for testing by regulators, as well as schematics or other detailed explanation of their technology sufficient for the department to evaluate its suitability for certification.
(e)The list of software controls processes that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.
(f)The department or other state agency that issued certification shall revoke certification for a software controls process if, at any time, it fails to meet the performance standards for certification. In that case, the department or other state agency that issued certification shall notify relevant printer manufacturers with printer models known to use that software controls process that a software controls process they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described in Section 3273.636.
3273.635.(a)On or before March 1, 2028, the department or other relevant state agency shall publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include all of the following:
(1)Performance standards for equipping three-dimensional printers with a certified firearm blueprint detection algorithm and where to find updated lists of certified firearm blueprint detection algorithms published by the department.
(2)Performance standards for equipping three-dimensional printers with a certified software controls process and where to find updated lists of certified software controls processes published by the department.
(3)Performance standards on how to test functionality of the certified firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
(b)The performance standards described in subdivision (a) shall be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section.
3273.636.(a)(1)On or before July 1, 2028, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the department an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
(2)The self-attestation shall include all of the following information:
(A)The make and model of the three-dimensional printer.
(B)Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm and which certified firearm blueprint detection algorithm from the list published pursuant to Section 3273.633 was used.
(C)Confirmation that the manufacturer has equipped that make and model with a certified software controls process and which certified software controls process from the list published pursuant to Section 3273.634 was used.
(D)Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the department pursuant to Section 3273.635.
(3)If the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance. Any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list described in subdivision (c).
(b)(1)On or before July 1, 2028, the department shall begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the department to inspect and confirm that a specific make and model of printer complies with the performance standards described in subdivision (a).
(2)If the department verifies a printer make and model is properly equipped with firearm blocking technology, the department shall issue to the manufacturer a written notice of compliance verification for the make and model, which shall constitute compliance with subdivision (a) of Section 3273.637.
(3)No manufacturer of a printer for which a written notice of compliance verification has been issued under this subdivision shall be subject to civil actions under Section 3273.637. This subdivision does not apply to a manufacturer who received notice from the department that the previously verified model contained a firearms blueprint detection algorithm for which certification was revoked pursuant to subdivision (d) of Section 3273.633 or a software controls process for which certification was revoked under subdivision (d) of Section 3273.634, until the manufacturer updates their model and resubmits the model for an updated compliance verification.
(c)(1)On or before September 1, 2028, the department shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations pursuant to subdivision (a), any makes and models of three-dimensional printers that have an incomplete attestation on file, any makes and models that have submitted for and received the voluntary compliance verification described in subdivision (b), and any makes and models that have a pending submission for voluntary compliance verification under subdivision (b).
(2)The lists shall be updated no less frequently than on a quarterly basis and made accessible on the departments internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the departments internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
(3)It shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of Section 3273.637 that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
3273.637.(a)Any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
(1)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described in Sections 3273.633 and 3273.634.
(2)Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described in Section 3273.636.
(b)Any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the department described in subdivision (c) of Section 3273.636.
(c)It shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
(1)The three-dimensional printer shall be equipped with firearm blocking technology.
(2)The three-dimensional printer shall be listed by the department on the published list described in subdivision (c) of Section 3273.636 as having a complete attestation on file, having received a certificate of compliance verification, or having a pending application for a certificate of compliance verification.
(d)This section shall not apply to the following products:
(1)Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined in subdivision (g) of Section 29185 of the Penal Code.
(2)Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
(3)Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
(e)A civil action may be brought against a person who does either of the following:
(1)(A)Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
(B)It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
(C)It shall be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.
(2)Knowingly files an attestation in subdivision (a) of Section 3273.636 containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined in Section 118 of the Penal Code.
(f)(1)A person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(2)The Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
(3)A prevailing plaintiff shall be entitled to recover reasonable attorneys fees and costs.
(g)The remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
(h)This section shall become operative on March 1, 2029.
3273.638.The department may promulgate regulations and develop forms and publications necessary to implement this title.
SEC. 2.Section 29187 is added to the Penal Code, to read:29187.(a)It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justices list of three-dimensional printers eligible for sale in California, as described in Section 3273.636 of the Civil Code.
(b)A violation of this section is a misdemeanor.
(c)This section does not preclude prosecution under any other law providing for a greater penalty.
SEC. 3.The provisions of this act are severable. If any provision of this act or its application is held invalid, that invalidity shall not affect other provisions or applications that can be given effect without the invalid provision or application.
SEC. 4.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
|
Date
|
Status
|
|---|---|
| Sep 26, 2026 | Chaptered by Secretary of State - Chapter 461, Statutes of 2026. |
| Sep 26, 2026 | Approved by the Governor. |
| Sep 14, 2026 | Enrolled and presented to the Governor at 1:30 p.m. |
| Aug 31, 2026 | Senate amendments concurred in. To Engrossing and Enrolling. (Ayes 60. Noes 18. Page 7035.). |
| Aug 31, 2026 | Senate amendments concurred in. To Engrossing and Enrolling. (Ayes 60. Noes 18.). |
| Aug 31, 2026 | Senate amendments concurred in. To Engrossing and Enrolling. |
| Aug 31, 2026 | In Assembly. Concurrence in Senate amendments pending. |
| Aug 31, 2026 | Read third time. Passed. Ordered to the Assembly. (Ayes 29. Noes 10.). |
| Aug 30, 2026 | Read second time. Ordered to third reading. |
| Aug 28, 2026 | Read third time and amended. Ordered to second reading. |
| Aug 18, 2026 | Read second time. Ordered to third reading. |
| Aug 17, 2026 | Read second time and amended. Ordered returned to second reading. |
| Aug 17, 2026 | From committee: Amend, and do pass as amended. (Ayes 5. Noes 2.) (August 13). |
| Aug 3, 2026 | In committee: Referred to APPR. suspense file. |
| Jul 2, 2026 | Read second time and amended. Re-referred to Com. on APPR. |
| Jul 1, 2026 | From committee: Amend, and do pass as amended and re-refer to Com. on APPR. (Ayes 5. Noes 1.) (June 30). |
| Jun 24, 2026 | From committee: Do pass and re-refer to Com. on PUB. S. (Ayes 11. Noes 2.) (June 23). Re-referred to Com. on PUB. S. |
| Jun 15, 2026 | From committee chair, with author's amendments: Amend, and re-refer to committee. Read second time, amended, and re-referred to Com. on JUD. |
| Jun 3, 2026 | Referred to Coms. on JUD. and PUB. S. |
| May 27, 2026 | In Senate. Read first time. To Com. on RLS. for assignment. |
| May 26, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 58. Noes 19. Page 5372.) |
| May 26, 2026 | Read third time. Passed. Ordered to the Senate. (Ayes 58. Noes 19.) |
| May 26, 2026 | Read third time. Passed. Ordered to the Senate. |
| May 19, 2026 | Read second time. Ordered to third reading. |
| May 18, 2026 | Read second time and amended. Ordered returned to second reading. |
| May 14, 2026 | Joint Rule 62(a), file notice suspended. (Page 5030.) |
| May 14, 2026 | From committee: Amend, and do pass as amended. (Ayes 11. Noes 4.) (May 14). |
| May 14, 2026 | Joint Rule 62(a), file notice suspended. |
| May 13, 2026 | In committee: Set, first hearing. Referred to APPR. suspense file. |
| Apr 15, 2026 | From committee: Do pass and re-refer to Com. on APPR. (Ayes 9. Noes 3.) (April 14). Re-referred to Com. on APPR. |
| Mar 25, 2026 | From committee: Do pass and re-refer to Com. on JUD. (Ayes 6. Noes 0.) (March 24). Re-referred to Com. on JUD. |
| Mar 9, 2026 | Referred to Coms. on PUB. S. and JUD. |
| Feb 18, 2026 | From printer. May be heard in committee March 20. |
| Feb 17, 2026 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 31, 2026 | AB 2047 Bauer-Kahan Concurrence in Senate Amendments | Assembly Floor |
Passed |
|
| Aug 31, 2026 | Assembly 3rd Reading AB2047 Bauer-Kahan et al. By Blakespear | Senate Floor |
Passed |
|
| Aug 13, 2026 | Do pass as amended | Senate Standing Committee on Appropriations |
Passed |
|
| Aug 3, 2026 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Jun 30, 2026 | Do pass as amended, but first amend, and re-refer to the Committee on [Appropriations] | Senate Standing Committee on Public Safety |
Passed |
|
| Jun 23, 2026 | Do pass, but first be re-referred to the Committee on [Public Safety] | Senate Standing Committee on Judiciary |
Passed |
|
| May 26, 2026 | AB 2047 Bauer-Kahan Assembly Third Reading | Assembly Floor |
Passed |
|
| May 14, 2026 | Do pass as amended. | Assembly Standing Committee on Appropriations |
Passed |
|
| Apr 14, 2026 | Do pass and be re-referred to the Committee on [Appropriations] | Assembly Standing Committee on Judiciary |
Passed |
|
| Mar 24, 2026 | Do pass and be re-referred to the Committee on [Judiciary] | Assembly Standing Committee on Public Safety |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| 3d Printing Nerd | ** Against | |
| 4 Private Individuals | ** Against | |
| 57 Private Individuals | ** Support | |
| Aclu California Action | ** Against | |
| American Academy of Pediatrics | ** Support | |
| Asian American Christian Collaborative | ** Support | |
| Beverly Hills High School Students Demand Action | ** Support | |
| Brady California | ** Support | |
| Brady United Against Gun Violence | ** Support | |
| California Chapter of the American College of Emergency Physicians | ** Support | |
| California Medical Association (CMA) | ** Support | |
| Californians United for a Responsible Budget | ** Against | |
| California Police Chiefs Association | ** Support | |
| California Rifle And Pistol Association, Inc. | ** Against | |
| CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO | ** Support | |
| Chapman University Students Demand Action | ** Support | |
| Citizens Privacy Coalition of Santa Clara County | ** Against | |
| Citizens Privacy Coalition of Santa Clara County | ** Against | |
| City of Alameda | ** Support | |
| City Of Los Angeles | ** Support | |
| City of Santa Rosa | ** Support | |
| Community Manufacturing Initiative | ** Against | |
| Consumer Protection Policy Center/USD School of Law | ** Support | |
| Democratic Socialists of America - San Diego | ** Against | |
| Democratic Socialists of America, San Diego | ** Against | |
| Electronic Frontier Foundation | ** Against | |
| Esaero, Inc. | ** Against | |
| ESAero, INC | ** Against | |
| Everytown for Gun Safety | ** Support | |
| Everytown for Gun Safety Action Fund | ** Support | |
| Everytown for Gun Safety Action Fund (Sponsor) | ** Support | |
| Fight For The Future | ** Against | |
| Former City Attorney Mike Feuer, City of Los Angeles | ** Support | |
| Free Software Foundation | ** Against | |
| Fulu Foundation | ** Against | |
| Giffords | ** Support | |
| GLMA: Health Professionals Advancing LGBTQ Equality | ** Support | |
| Gray Area | ** Against | |
| GUN OWNERS OF CALIFORNIA, INC. | ** Against | |
| Ifixit | ** Against | |
| Indivisible Mid-Peninsula | ** Support | |
| Initiate Justice | ** Against | |
| Inspired Flight Technologies | ** Against | |
| Invisible Pack | ** Against | |
| Invisible Pack Inc. | ** Against | |
| Jewish California | ** Support | |
| Leafeye | ** Against | |
| Make Good Inc. | ** Against | |
| Mantis Composites | ** Against | |
| Mantis Composites Inc. | ** Against | |
| Matterhackers | ** Against | |
| Moms Demand Action for Gun Sense in America | ** Support | |
| Moms Demand Action for Gun Sense in America (Sponsor) | ** Support | |
| National Rifle Association - Institute For Legislative Action | ** Against | |
| National Rifle Association Institute For Legislative Action | ** Against | |
| Newtown Action Alliance | ** Support | |
| Noisebridge Hackerspace | ** Against | |
| Oakland Privacy | ** Against | |
| Pivotal Design, INC. | ** Against | |
| Privacy Rights Clearinghouse | ** Against | |
| Prosecutors Alliance Action | ** Support | |
| Prusa Usa, Inc. | ** Against | |
| Repair.org | ** Against | |
| riverside county democratic party | ** Support | |
| Root Access Hackerspace | ** Against | |
| San Diegans For Gun Violence Prevention | ** Support | |
| San Diego City Attorney | ** Support | |
| San Diego City Attorney's Office | ** Support | |
| San Diego County School Board Association | ** Support | |
| Secure Resilient Future Foundation | ** Against | |
| See3d, Inc. | ** Against | |
| Software Freedom Conservancy | ** Against | |
| Streamline Aerospace | ** Against | |
| Students Demand Action at U.C. Davis | ** Support | |
| Students Demand Action At UC Davis | ** Support | |
| Students Demand Action for Gun Sense in America | ** Support | |
| Students Demand Action for Gun Sense in America (Sponsor) | ** Support | |
| Sudo Room Hackerspace | ** Against | |
| Thangs Inc. | ** Against | |
| Trust Automation | ** Against | |
| Ucla Students Demand Action | ** Support | |
| West3d | ** Against | |
| West3d LLC | ** Against | |
| Youth ALIVE! | ** Support | |
| Zone 5 Technologies | ** Against |
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-4171 | AB 2047 |
THIRD READING
Bill No: AB 2047
Author: Bauer-Kahan (D), et al.
Amended: 9/4/26
Vote: 21
SENATE JUDICIARY COMMITTEE: 11-2, 6/23/26
AYES: Umberg, Allen, Ashby, Caballero, Durazo, Laird, Reyes, Stern, Wahab, Weber Pierson, Wiener
NOES: Niello, Valladares
SENATE PUBLIC SAFETY COMMITTEE: 5-1, 6/30/26
AYES: Arreguín, Caballero, Cortese, Pérez, Wiener
NOES: Seyarto
SENATE APPROPRIATIONS COMMITTEE: 5-2, 8/13/26
AYES: Cervantes, Cabaldon, Grayson, Richardson, Wahab
NOES: Seyarto, Dahle
ASSEMBLY FLOOR: 58-19, 5/26/26 - See last page for vote
SUBJECT: Firearms: 3-dimensional printing blocking technology
SOURCE: Everytown for Gun Safety Action Fund
DIGEST:
This bill 1) makes it unlawful to sell or transfer a three-dimensional printer in California that is not equipped with firearm blocking technology that meets minimum performance standards developed by the Department of Justice (DOJ); 2) requires the DOJ, beginning July 1, 2027, to check on a quarterly basis whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology, and if the DOJ determines that ASTM International has published or adopted such industry standards, requires the DOJ to publish written guidance or regulations within 24 months after making that determination; and 3) requires this guidance to describe minimum performance standards for three-dimensional printer firearm blocking technology before a printer can lawfully be sold or offered for sale in the state; specifies that, if the DOJ determines as of July 1, 2029 that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the DOJ has no further responsibility to ascertain whether ASTM International has published or adopted industry standards; exempts from its provisions printers used exclusively for the manufacturing of properties (props) in the entertainment industry or a person who distributes or causes the distribution of digital firearm manufacturing codes solely for the bona fide purpose of, among other things, developing refining and testing the functionality of a firearm blocking technology; and permits the DOJ to adopt regulations that provide for additional exceptions, as specified.
Senate Floor Amendments of 8/28/26 amend the definitions of “firearm” and “firearm blocking technology”, as a definition for “machine gun conversion device” clarify that the requirements upon the Department of Justice (DOJ) apply when it determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers that demonstrate that it is technologically feasible to equip three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California; permit, rather than require, the DOJ to provide for a self-attestation or self-certification process by which manufactures must certify that the three-dimensional printers they sell in California incorporate firearm blocking technology that meets the DOJ’s minimum performance standards; makes it unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology that meets the minimum performance standards; clarifies that these provisions do not apply to printer used exclusively for manufacturing props for the entertainment industry and to a person who distributes or causes to be distributed a digital firearm manufacturing code solely for the bona fide purpose of developing or testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
ANALYSIS:
Existing law:
- Establishes the Firearm Industry Responsibility Act (FIRA) to prohibit firearm industry members from dealing in abnormally dangerous firearm-related products. Requires a firearm industry member to comply with the firearm industry standard of conduct, and makes it a violation of the firearm industry standard of conduct for a firearm industry member to fail to comply with specified provisions, including establishing, implementing, and enforcing reasonable controls. (Civil [Civ.] Code, §§ 3273.50 et seq.)
- Specifies that a firearm-related product includes a “firearm manufacturing machine,” and defines, for the purposes of FIRA, “firearm manufacturing machine” to mean a three-dimensional printer, as defined, a computer numerical control (CNC) milling machine, or a similar machine, that is marketed or sold, or is reasonably designed or intended to be used, to manufacture or produce firearms, firearm components, or firearm accessories. (Civ. Code § 32783.50(d).)
- Authorizes a person who has suffered harm because of a firearm industry member’s conduct, the Attorney General, a city attorney, and a county counsel to bring an action in court under FIRA for a violation of the firearm industry standard of conduct. (Civ. Code § 3273.52.)
- Permits a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means, including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, a member of the Armed Forces, or any law enforcement agency or forensic laboratory, as specified, or who commits specified criminal acts related to firearms. (Civ. Code § 3273.61.)
- Prohibits a person from selling, offering to sell, transferring, advertising, or marketing a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in the state to engage in conduct prohibited by Penal Code section 29185, or in a manner that otherwise knowingly or recklessly aids, abets, promotes, or facilitates conduct prohibited by that section.
- Creates a rebuttable presumption that a person is engaged in this prohibited conduct if they offer to sell, advertise, or market a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s ability to manufacture firearms, and the person sells or transfers the CNC milling machine or three-dimensional printer without verifying that the purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited, as specified. (Civ. Code § 3273.62.)
- Makes it unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civ. Code § 3273.625.)
- Defines “firearm” to mean a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion. (Pen. Code § 16520.)
This bill:
- Establishes the “California Firearm Printing Prevention Act,” and defines for the Act the following:
- “ASTM International” to mean ASTM International, formerly American Society for Testing Materials;
- “Department” to mean the Department of Justice;
- “firearm” to mean the definition of firearm in subdivisions (a) and (b) of Penal Code section 16520;
- “firearm blocking technology” to mean hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or a machine gun conversion device;
- “machine gun conversion device” to mean a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun, to include a “pistol converter” as defined in Penal Code section 17015; and
- “Three-dimensional printer” to have the same meaning as defined in Civil Code section 3273.60.
- Requires, no later than July 1, 2027, that the DOJ check on a quarterly basis whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology.
- Requires the DOJ, if the DOJ determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, to publish written guidance or regulations within 24 months, and requires this written guidance or regulations to describe minimum performance standards for firearm blocking technology that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. Requires, in accordance with the California Administrative Procedure Act, that this written guidance or regulations be developed in consultation with stakeholders.
- Requires the DOJ’s written guidance or regulations pursuant to 12), above, to be informed by the ASTM International industry standards, and permits the written guidance or regulations to incorporate some or all of the ASTM International industry standards. Permits the DOJ’s written guidance or regulations to provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of these provisions, and permits them to consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside of California, as applicable.
- Permits the DOJ’s written guidance or regulations to provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers must certify to the DOJ that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the DOJ.
- Requires, commencing one year after the DOJ has published its written guidance or regulations for firearm blocking technology, that a manufacturer of any three-dimensional printer ensure that the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards in the DOJ’s guidance or regulations before the manufacturer sells, offers to sell, or transfers for consideration a three-dimensional printer to any person in California.
- Makes unlawful, commencing one year after the DOJ has published is written guidance or regulations for firearm blocking technology, to sell, offer for sale, or transfer for consideration a three-dimensional printer in the state of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the DOJ’s guidance or regulations.
- Exempts from these provisions:
- Printers used exclusively for the manufacturing of properties (props) in the entertainment industry; or
- A person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined in Section 3273.60, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
- Specifies that, if the DOJ determines on July 1, 2029 that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the DOJ shall not be required to make any further determinations under these provisions.
- Permits the DOJ to promulgate regulations and develop forms and publications to implement the requirements of this bill, and permits the DOJ to update the minimum performance standards, including to reflect any future updates ASTM International makes to the industry standards described in Section 3273.633. Permits the DOJ to adopt regulations that provide for exceptions to these provisions, if those exceptions are consistent with the purpose of these provisions to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: No
According to the Senate Appropriations Committee:
Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund).
SUPPORT: (Verified 8/28/26)
Everytown for Gun Safety Action Fund (source)
American Academy of Pediatrics
Asian American Christian Collaborative
Beverly Hills High School Students Demand Action
Brady California
Brady United Against Gun Violence
California Chapter of the American College of Emergency Physicians
California Medical Association (CMA)
California Police Chiefs Association
CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO
Chapman University Students Demand Action
City of Alameda
City of Los Angeles
City of Santa Rosa
Former City Attorney Mike Feuer, City of Los Angeles
Giffords
GLMA: Health Professionals Advancing LGBTQ Equality
Indivisible Mid-peninsula
Jewish California
Moms Demand Action for Gun Sense in America
Newtown Action Alliance
Prosecutors Alliance Action
Riverside County Democratic Party
San Diegans for Gun Violence Prevention
San Diego City Attorney
San Diego County School Board Association
Students Demand Action At UC Davis
Students Demand Action for Gun Sense in America
UCLA Students Demand Action
Youth Alive!
OPPOSITION: (Verified 8/28/26)
3D Printing Nerd
ACLU California Action
California Rifle and Pistol Association, Inc.
Citizens Privacy Coalition of Santa Clara County
Community Manufacturing Initiative
Democratic Socialists of America - San Diego
Electronic Frontier Foundation
Esaero, Inc.
Fight for the Future
Free Software Foundation
Fulu Foundation
Gray Area
Gun Owners of California, Inc.
Ifixit
Inspired Flight Technologies
Invisible Pack Inc.
Make Good Inc.
Mantis Composites Inc.
Matterhackers
National Rifle Association - Institute for Legislative Action
Noisebridge Hackerspace
Oakland Privacy
Privacy Rights Clearinghouse
Prusa Usa, Inc.
Root Access Hackerspace
Secure Resilient Future Foundation
See3d, Inc.
Software Freedom Conservancy
Streamline Aerospace
Sudo Room Hackerspace
Thangs Inc.
Trust Automation
Zone 5 Technologies
West3d LLC
ARGUMENTS IN SUPPORT: According to Everytown for Gun Safety, the sponsor of this bill:
The 3D printed gun crisis is not a faraway or abstract problem. It’s happening here in California, right now. And at the rate it’s increasing, this crisis will get much worse if we don’t use every tool we have. In just the six month span between September 2025 - February 2026, numerous instances of 3-D printed firearm manufacturing were uncovered by law enforcement agencies all around California. These incidents often include teenagers too young to legally purchase the types of firearms they are printing at home.
- In September 2025, Yuba County Sheriffs uncovered a “fully operational 3D-printing workshop” run by three men aged 19-38 and seized 8 handguns, several 3-D printed handgun frames, four assault weapons, one rifle, and assorted firearms parts.
- In October 2025, the Santa Clara County DA’s Gun Violence Task Force arrested a man who was on probation for domestic violence running a ghost gun manufacturing operation out of his apartment. The press release paints an alarming picture: “When task force members entered the prohibited person’s home, they found the 3D gun printer still working inside a closet, two loaded weapons, three nearly finished weapons, and 35 machine gun conversion devices. All of the weapons were considered “ghost guns” – made and sold with no serial number to avoid tracing and detection.”
- In November 2025, Santa Rosa Police detectives found an 18-year-old running a ghost gun manufacturing operation in his apartment, less than two years after arresting a 14-year-old illegally manufacturing a ghost gun with a 3-D printer.
- In February 2026, 3D-printed firearms were recovered in at least four more newsworthy incidents, spread around the state:
- Law enforcement in Santa Rosa seized over 165 guns and three 3D printers from a 22-year-old ghost guns manufacturer.18
- Victor Valley sheriffs found a 3D-printed assault rifle, over 130 Polymer80 jigs, 3D printer materials and a 3D printing guide for different firearms in a Lucerne Valley ghost guns arrest involving a man who was previously indicted and pled guilty for manufacturing guns for a gun trafficker.19
- A San Jose teenager was arrested with 27 finished or near-finished 3D-printed firearms, including DIY machine guns, and two 3D printers near his sneaker collection in his bedroom.
- A Daly City narcotics and identity theft investigation led to uncovering a San Francisco residence with several 3D-printed firearms, rifle components, and a 3D printer. […]
3D-printing firearms is the next wave of the ghost guns crisis, a problem California has been battling for years. The threat is evolving and our policy solutions need to evolve too. AB 2047 gives us a chance to get a step ahead of the criminals running underground ghost gun selling operations and the teenagers tempted to use a home 3-D printer in their bedroom or basement to print a deadly weapon. […]
While California’s recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without an intervention at the manufacturing stage. And there’s good news on this front: the technology already exists to equip printers to identify and block these dangerous firearm print jobs. AB 2047 will simply ensure that printer manufacturers actually deploy these technological solutions and stop the spread of DIY firearms before it accelerates any further.
Specifically, AB 2047 creates a new requirement that 3D printers sold in California must be equipped with firearm printing blocking technology by March 2029. The law will primarily be enforced through civil mechanisms similar to the existing Firearm Industry Responsibility Act (Civil Code section 3273.50 et seq.) and existing laws allowing for civil actions to enjoin Unlawful Firearm Manufacturing (Civil Code section 3273.60). The bill sets out a staged implementation process to evaluate and certify the underlying components of firearm printing blocking technology before imposing any kind of requirement on 3D printer manufacturers.
ARGUMENTS IN OPPOSITION: According to the California Rifle & Pistol Association, which opposes this bill:
While framed as preventing unlawful manufacturing, this bill represents a costly, impractical, and constitutionally problematic burden on innovation, small businesses, and lawful hobbyists.
Key concerns:
- Technological Impracticality and Ineffectiveness: Detection algorithms and software controls can be evaded by technically skilled individuals through modifications, open-source alternatives, or altered files. Criminals will simply ignore the mandates or obtain printers out-of-state, while law-abiding makers and innovators face unnecessary barriers.
- Burdensome Regulation and Costs: Mandatory certification, attestations, testing, and quarterly DOJ lists will drive up prices for 3D printers, harm small businesses and California’s emerging tech sector, and stifle hobbyist innovation in areas far beyond firearms (prototyping, education, manufacturing).
- Constitutional Issues: The bill imposes prior restraints and technological mandates on tools that have substantial lawful uses, raising serious Second Amendment concerns under Bruen and due process issues. It effectively creates a de facto ban on non-compliant printers for most consumers.
- Bureaucratic Overreach: Placing the DOJ in charge of certifying complex software algorithms and policing printer sales adds layers of red tape without meaningfully addressing criminal activity, which is already illegal under existing manufacturing prohibitions.
ASSEMBLY FLOOR: 58-19, 5/26/26
AYES: Addis, Aguiar-Curry, Ahrens, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Bennett, Berman, Boerner, Bonta, Bryan, Calderon, Caloza, Carrillo, Connolly, Elhawary, Fong, Gabriel, Garcia, Gipson, Mark González, Haney, Harabedian, Hart, Irwin, Jackson, Kalra, Krell, Lee, Lowenthal, McKinnor, Nguyen, Ortega, Pacheco, Papan, Patel, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Michelle Rodriguez, Rogers, Blanca Rubio, Schiavo, Schultz, Sharp-Collins, Solache, Soria, Stefani, Valencia, Ward, Wicks, Wilson, Zbur, Rivas
NOES: Alanis, Castillo, Chen, Davies, DeMaio, Dixon, Ellis, Flora, Gallagher, Jeff Gonzalez, Hadwick, Hoover, Johnson, Macedo, Patterson, Sanchez, Ta, Tangipa, Wallis
NO VOTE RECORDED: Lackey, Muratsuchi, Celeste Rodriguez
Prepared by: Ian Dougherty / JUD. / (916) 651-4113
9/14/26 12:56:17
**** END ****
CONCURRENCE IN SENATE AMENDMENTS
CSA1 Bill Id:AB 2047
Author:(Bauer-Kahan)
As Amended Ver:August 28, 2026
Majority vote
SUMMARY
Requires the Department of Justice (DOJ), among other things, to check whether ASTM International, formerly the American Society for Testing and Materials has published industry standards for firearm blocking technology for three-dimensional printers.
Senate Amendments
- State that beginning no later than July 1, 2027, and quarterly thereafter, the DOJ shall check whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology.
- Establish that if DOJ determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers, and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, all of the following shall apply:
- DOJ shall publish written guidance or regulations within 24 months after determining that ASTM International has published industry standards for firearm blocking technology for three-dimensional printers.
- The written guidance or regulations shall describe minimum performance standards for firearm blocking technology necessary that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. The written guidance or regulations shall be developed in consultation with stakeholders, as specified.
- DOJ's written guidance or regulations shall be informed by the ASTM International industry standards and may incorporate some or all of the ASTM International industry standards.
- DOJ's guidance or regulations may provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of this title.
- DOJ's written guidance or regulations may consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside California, as applicable.
- DOJ's written guidance or regulations may provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers are required to certify to the department that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the department.
- Provide that commencing one year after DOJ has published written guidance or regulations for firearm blocking technology, as specified, both of the following shall apply:
- Before a manufacturer of any three-dimensional printer sells, offers to sell, or transfers for consideration a three-dimensional printer in California, the manufacturer shall ensure the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards set forth in DOJ's guidance or regulations.
- It shall be unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in the State of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the department's guidance or regulations.
- State that this bill does not apply to printers used exclusively for the manufacturing of properties (props) in the entertainment industry.
- Provide that existing law that authorizes a civil action does not apply does not apply to a person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
- Provide that if, as of July 1, 2029, DOJ determines that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the department shall not be required to make any further determinations under this section.
- State that DOJ may update the minimum performance standards adopted pursuant to this title, including to reflect any future updates ASTM International makes to the industry standards, as described. DOJ may also adopt regulations that provide for additional exceptions to this title, if those exceptions are consistent with the purpose of this title to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
- Define "firearm" to include the frame or receiver of the weapon, including both a completed frame or receiver, or a firearm precursor part, as defined.
- Define "firearm blocking technology" to include a machine gun conversion device.
- Define "machine gun conversion device" as a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun. The term includes a "pistol converter," as defined.
- Define "ASTM International" as ASTM International, formerly the American Society for Testing and Materials.
- Delete all other provisions of the bill, except specified definitions.
COMMENTS
As Passed by the Assembly, this bill: Required the Department of Justice (DOJ) or other relevant state agency, among other things, to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms and any business that produces or manufactures three-dimensional printers for sale or transfer in California to submit to the DOJ an attestation for each make and model of printer they intend to make available for sale or transfer in California, as defined.
Major Provisions
- Stated that the DOJ or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms.
- Stated that the DOJ or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency, academic consortium, or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
- Required on or before January 1, 2028, the DOJ or other relevant state agency should publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with specified laws.
- Stated that the DOJ or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.
- Provided that the performance standards should require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
- Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
- Flag any disallowed files for rejection by a software control process.
- Provided that the performance standards should require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
Stated that the DOJ or other relevant state agency set standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files. - Stated that the DOJ or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files. If the written guidance on performance standards determines that a novel technique with a substantially higher degree is available to be utilized by algorithm developers, the DOJ or other relevant agency shall issue an update to the written guidance on performance standards.
- The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
- Stated that the DOJ or other relevant state agency preparing the written guidance on performance standards shall periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality.
- Provided that if, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified, as specified, the DOJ or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique.
- Provided that any vendor with a previously qualified algorithm who is required to make that update should have a reasonable period of time, not less than three months, to update their previously qualified algorithm.
- Stated that the DOJ or relevant state agency should engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
- Requires that on or before January 1, 2028, the DOJ or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes for three-dimensional printer manufacturer use in complying defined laws.
- Stated that the DOJ or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
- Established that the performance standards should set minimum standards on developer testing but should not require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
- Stated that the DOJ should not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Provided that the performance standards should set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
- Firmware design.
- Integrated preprint software design.
- Any other form, including, but not limited to, handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the department first determines that the software controls process is both of the following:
- At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described.
- At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B).
- Provided that the written guidance should include both of the following:
- For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
- For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
- Stated that DOJ or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
- Required on or before March 1, 2028, the DOJ or other relevant state agency should publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include: Performance standards performance standards on how to test functionality of the firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
- Established that the performance standards described above should be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section.
- Required on or before July 1, 2028, any business that produces or manufactures three-dimensional printers for sale or transfer in California should submit to the DOJ an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
- Stated that the self-attestation should include all of the following information:
- The make and model of the three-dimensional printer.
- Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm.
- Confirmation that the manufacturer has equipped that make and model with a certified software controls process.
- Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the DOJ, as specified.
- Stated that if the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer.
- Stated that any make and model of three-dimensional printer actively under investigation and inspection should be identified as having an incomplete attestation on the list, as described.
- Required that on or before September 1, 2028, DOJ shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestation on file.
- Specified that the lists should be updated no less frequently than on a quarterly basis and made accessible on the DOJ's internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the department's internet website to ensure their inventory for sales in California consists of compliant three-dimensional printers.
- Provided that it should be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged, specified violation that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the DOJ on the published list described, and not designated as having an incomplete attestation.
- Stated that any business that produces or manufactures three-dimensional printers for sale or transfer in California should take both of the following steps:
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described.
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described.
- Stated that any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California should consult the list published by the DOJ, as described.
- Provided that it should be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
- The three-dimensional printer shall be equipped with firearm blocking technology.
- The three-dimensional printer shall be listed by the DOJ on the published list specified as having a complete attestation on file.
- Established that this section should not apply to the following products:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined.
- Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
- Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
- Provided that a civil action may be brought against a person who does either of the following:
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
- Knowingly files an attestation containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined.
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- Stated that a person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Provided that the Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed $25,000 for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Stated that a prevailing plaintiff shall be entitled to recover reasonable attorney's fees and costs.
- Stated that the remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
- Stated that the DOJ may promulgate regulations and develop forms and publications necessary to implement this title.
- Provided that it is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the DOJ's list of three-dimensional printers eligible for sale in California with the intent to facilitate the unlawful manufacture of firearms, as defined, as described. States that a violation of this section is a misdemeanor and does not preclude prosecution under any other law providing for a greater penalty.
- Removed the requirement that on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards, among other related requirements.
- Removed requirement that the list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of DOJ or other relevant state agency issuing certification, among other related requirements.
- Removed requirement that required on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described shall accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards described, among other related requirements.
- Removed requirement that on or before July 1, 2028, the DOJ shall begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the DOJ to inspect and confirm that a specific make and model of printer complies with the performance standards, among other related requirements.
- Removed requirement stating that it should be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.
- Defined "department" as the Department of Justice.
- Defined "firearm" as a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion.
- Defined "firearm blocking technology" as hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defined "firearm blueprint detection algorithm" as a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
- Defined "firearm precursor part" as any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted.
- Defined "firmware design" as integration of a firearms blueprint detection algorithm directly into a three-dimensional printer's firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defined "illegal firearm parts" as a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
- Defined "integrated pre-print software design" as a limitation of a three-dimensional printer's operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer's proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defined "pistol convertor" as any device or instrument that when installed in or attached to the rear of the slide of a semiautomatic pistol, replaces the backplate, and interferes with the trigger mechanism and thereby enables the pistol to shoot automatically more than one shot by a single function of the trigger. A pistol converter includes, but is not limited to, a pistol converter manufactured using a three-dimensional printer, as defined.
- Defined "software controls process" means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defined "three-dimensional printer" as a computer-aided manufacturing device capable of producing a three-dimensional object from a three-dimensional digital model through an additive manufacturing process that involves the layering of two-dimensional cross sections formed of a resin or similar material that are fused together to form a three-dimensional object.
According to the Author
"California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional (3D) printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
"There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child.
"As technology evolves, it's important that consumer protections change with it to ensure the safety of our communities."
Arguments in Support
According to Brady United Against Gun Violence, "The Firearm Printing Prevention Act, which will combat the emerging crisis of 3D printed firearms by requiring that every 3D printer sold in our state comes with technology that will block 3D print jobs for firearms and illegal firearm parts that turn pistols into machine guns (machinegun-conversion devices, commonly called "switches" or "MCDs").
"Rapid evolution in the printing industry in recent years has radically increased the threat from 3D printed firearms. Over the past decade, 3D printers have improved in capabilities, dropped in price, and exploded in popularity. Entry-level models now cost as little as $250 and are capable of printing the critical components of firearms. Anyone with internet access can find thousands of digital instructional files for guns and illegal gun parts online.
"California's status as the state with the strongest gun laws makes 3D printing all the more appealing for people prohibited from owning firearms. In 2025, domestic abusers, teenagers, and large-scale criminal suppliers were found manufacturing 3D-printed firearms in California. Just in February 2026:
- Law enforcement in Santa Rosa seized over 165 guns and 3D printers from a 22-year-old ghost guns manufacturer.
- Victor Valley sheriffs arrested two men with a 3D-printed assault rifle, over 130 Polymer80 jigs (ghost gun making tools), 3D printer materials and a 3D printing guide for different firearms.
- A San Jose teen was caught with 27 finished or near-finished 3D-printed firearms, including [do it yourself] (DIY) machine guns, and two 3D printers.
"3D-printed firearms undermine our state's entire gun safety apparatus. Skip-the-background-check gun printing upends the entire system of gun safety laws - circumventing California's laws that seek to ensure guns don't end up in the hands of people with dangerous histories and that extremely dangerous weapons don't end up in our state.
"The good news is: the technology already exists to equip printers to identify and block these dangerous print jobs—this new legislation will simply ensure that printer manufacturers actually deploy these solutions and stop the spread of DIY firearms before it accelerates any further. The Firearm Printing Prevention Act is an upstream solution that builds on California's legacy of combating emerging firearm threats, like the first wave of ghost guns and DIY machine guns.
"California has taken early steps to prohibit personal manufacturing of firearms with a 3D printer and created pathways to civil liability for people who aid and abet illegal 3D firearm manufacturing. While those recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can't fully address this emerging threat to our foundational gun laws and public safety without this intervention at the manufacturing stage.
"We can help prevent illegal guns flowing into California communities and thwart gun traffickers trying to flout California's strong gun safety laws by ensuring that all 3D printers sold on the California household consumer retail market have firearm printing blocking technology installed. For these reasons, we strongly support AB 2047 and we urge the legislature to stand with us in combatting the emerging threat of 3D-printed firearms."
Arguments in Opposition
According to the National Rifle Association Institute for Legislative Action, "On the outset, the NRA has consistently opposed efforts to ban or restrict the use of 3D printing technology as it relates to the lawful exercise of the right to keep and bear arms. AB 2047 represents a significant expansion of such efforts, establishing an unprecedented regulatory regime that conditions the sale and use of 3D printers on state-approved software designed to detect and block firearm-related digital files.
"As a matter of policy, this approach raises significant constitutional and practical concerns. The bill implicates the Second Amendment by placing prospective restrictions on self-manufacture of firearms. By conditioning access to commonly available tools on government-imposed technology, the bill further burdens and prohibits the ability of law-abiding individuals to exercise a constitutional right.
"AB 2047 also raises serious First Amendment concerns. By mandating the use of state-approved filtering mechanisms to monitor and restrict digital files and code, the bill extends regulation into areas of protected expression. Requiring manufacturers to embed such controls, and penalizing their circumvention, introduces a government directed role in regulating the dissemination and use of information.
"In addition, the bill's reliance on evolving detection standards, that are not required to achieve complete accuracy, creates a substantial risk of overbreadth, potentially restricting lawful and unrelated digital content. At the same time, individuals' intent on unlawful activity remain unlikely to be deterred by software-based restrictions that can be modified or circumvented.
"For those reasons, we respectably encourage that the Committee reject Assembly Bill 2047."
FISCAL COMMENTS
According to the Senate Appropriations Committee, "Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund)."
VOTES:
ASM PUBLIC SAFETY: 6-0-3
YES: Schultz, Mark González, Harabedian, Nguyen, Ramos, Sharp-Collins
ABS, ABST OR NV: Alanis, Haney, Lackey
ASM JUDICIARY: 9-3-0
YES: Kalra, Bauer-Kahan, Bryan, Connolly, Harabedian, Pacheco, Papan, Stefani, Zbur
NO: Macedo, Dixon, Sanchez
ASM APPROPRIATIONS: 11-4-0
YES: Wicks, Aguiar-Curry, Calderon, Caloza, Fong, Mark González, Krell, Pacheco, Pellerin, Sharp-Collins, Solache
NO: Hoover, Dixon, Ta, Tangipa
ASSEMBLY FLOOR: 58-19-3
YES: Addis, Aguiar-Curry, Ahrens, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Bennett, Berman, Boerner, Bonta, Bryan, Calderon, Caloza, Carrillo, Connolly, Elhawary, Fong, Gabriel, Garcia, Gipson, Mark González, Haney, Harabedian, Hart, Irwin, Jackson, Kalra, Krell, Lee, Lowenthal, McKinnor, Nguyen, Ortega, Pacheco, Papan, Patel, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Michelle Rodriguez, Rogers, Blanca Rubio, Schiavo, Schultz, Sharp-Collins, Solache, Soria, Stefani, Valencia, Ward, Wicks, Wilson, Zbur, Rivas
NO: Alanis, Castillo, Chen, Davies, DeMaio, Dixon, Ellis, Flora, Gallagher, Jeff Gonzalez, Hadwick, Hoover, Johnson, Macedo, Patterson, Sanchez, Ta, Tangipa, Wallis
ABS, ABST OR NV: Lackey, Muratsuchi, Celeste Rodriguez
UPDATED
VERSION: August 28, 2026
CONSULTANT: Dustin Weber / PUB. S. / (916) 319-3744 FN: 0004563
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-4171 | AB 2047 |
THIRD READING
Bill No: AB 2047
Author: Bauer-Kahan (D), et al.
Amended: 8/28/26 in Senate
Vote: 21
SENATE JUDICIARY COMMITTEE: 11-2, 6/23/26
AYES: Umberg, Allen, Ashby, Caballero, Durazo, Laird, Reyes, Stern, Wahab, Weber Pierson, Wiener
NOES: Niello, Valladares
SENATE PUBLIC SAFETY COMMITTEE: 5-1, 6/30/26
AYES: Arreguín, Caballero, Cortese, Pérez, Wiener
NOES: Seyarto
SENATE APPROPRIATIONS COMMITTEE: 5-2, 8/13/26
AYES: Cervantes, Cabaldon, Grayson, Richardson, Wahab
NOES: Seyarto, Dahle
ASSEMBLY FLOOR: 58-19, 5/26/26 - See last page for vote
SUBJECT: Firearms: 3-dimensional printing blocking technology
SOURCE: Everytown for Gun Safety Action Fund
DIGEST:
This bill makes it unlawful to sell or transfer a three-dimensional printer in California that is not equipped with firearm blocking technology that meets minimum performance standards developed by the Department of Justice (DOJ); requires the DOJ, beginning July 1, 2027, to check on a quarterly basis whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology, and if the DOJ determines that ASTM International has published or adopted such industry standards, requires the DOJ to publish written guidance or regulations within 24 months after making that determination; requires this guidance to describe minimum performance standards for three-dimensional printer firearm blocking technology before a printer can lawfully be sold or offered for sale in the state; specifies that, if the DOJ determines as of July 1, 2029 that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the DOJ has no further responsibility to ascertain whether ASTM International has published or adopted industry standards; exempts from its provisions printers used exclusively for the manufacturing of properties (props) in the entertainment industry or a person who distributes or causes the distribution of digital firearm manufacturing codes solely for the bona fide purpose of, among other things, developing refining and testing the functionality of a firearm blocking technology; and permits the DOJ to adopt regulations that provide for additional exceptions, as specified.
Senate Floor Amendments of 8/28/26 amend the definitions of “firearm” and “firearm blocking technology”, ass a definition for “machine gun conversion device” clarify that the requirements upon the Department of Justice (DOJ) apply when it determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers that demonstrate that it is technologically feasible to equip three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California; permit, rather than require, the DOJ to provide for a self-attestation or self-certification process by which manufactures must certify that the three-dimensional printers they sell in California incorporate firearm blocking technology that meets the DOJ’s minimum performance standards; makes it unlawful to sell, offer for sale, or transfer for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology that meets the minimum performance standards; clarifies that these provisions do not apply to printer used exclusively for manufacturing props for the entertainment industry and to a person who distributes or causes to be distributed a digital firearm manufacturing code solely for the bona fide purpose of developing or testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
ANALYSIS:
Existing law:
- Establishes the Firearm Industry Responsibility Act (FIRA) to prohibit firearm industry members from dealing in abnormally dangerous firearm-related products. Requires a firearm industry member to comply with the firearm industry standard of conduct, and makes it a violation of the firearm industry standard of conduct for a firearm industry member to fail to comply with specified provisions, including establishing, implementing, and enforcing reasonable controls. (Civil [Civ.] Code, §§ 3273.50 et seq.)
- Specifies that a firearm-related product includes a “firearm manufacturing machine,” and defines, for the purposes of FIRA, “firearm manufacturing machine” to mean a three-dimensional printer, as defined, a computer numerical control (CNC) milling machine, or a similar machine, that is marketed or sold, or is reasonably designed or intended to be used, to manufacture or produce firearms, firearm components, or firearm accessories. (Civ. Code § 32783.50(d).)
- Authorizes a person who has suffered harm because of a firearm industry member’s conduct, the Attorney General, a city attorney, and a county counsel to bring an action in court under FIRA for a violation of the firearm industry standard of conduct. (Civ. Code § 3273.52.)
- Permits a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means, including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, a member of the Armed Forces, or any law enforcement agency or forensic laboratory, as specified, or who commits specified criminal acts related to firearms. (Civ. Code § 3273.61.)
- Prohibits a person from selling, offering to sell, transferring, advertising, or marketing a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in the state to engage in conduct prohibited by Penal Code section 29185, or in a manner that otherwise knowingly or recklessly aids, abets, promotes, or facilitates conduct prohibited by that section.
- Creates a rebuttable presumption that a person is engaged in this prohibited conduct if they offer to sell, advertise, or market a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s ability to manufacture firearms, and the person sells or transfers the CNC milling machine or three-dimensional printer without verifying that the purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited, as specified. (Civ. Code § 3273.62.)
- Makes it unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civ. Code § 3273.625.)
- Defines “firearm” to mean a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion. (Pen. Code § 16520.)
This bill:
- Establishes the “California Firearm Printing Prevention Act,” and defines for the Act the following:
- “ASTM International” to mean ASTM International, formerly American Society for Testing Materials;
- “Department” to mean the Department of Justice;
- “firearm” to mean the definition of firearm in subdivisions (a) and (b) of Penal Code section 16520;
- “firearm blocking technology” to mean hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or a machine gun conversion device;
- “machine gun conversion device” to mean a part or combination of parts designed for use in converting a semiautomatic weapon into a machine gun, to include a “pistol converter” as defined in Penal Code section 17015; and
- “Three-dimensional printer” to have the same meaning as defined in Civil Code section 3273.60.
- Requires, no later than July 1, 2027, that the DOJ check on a quarterly basis whether ASTM International has published industry standards for equipping three-dimensional printers with firearm blocking technology.
- Requires the DOJ, if the DOJ determines that ASTM International has published or adopted industry standards for firearm blocking technology for three-dimensional printers and that those standards demonstrate that it is technologically feasible to equip three-dimensional printers with firearm blocking technology, to publish written guidance or regulations within 24 months, and requires this written guidance or regulations to describe minimum performance standards for firearm blocking technology that shall be equipped in three-dimensional printers in order for those printers to be lawfully sold or offered for sale in California. Requires, in accordance with the California Administrative Procedure Act, that this written guidance or regulations be developed in consultation with stakeholders.
- Requires the DOJ’s written guidance or regulations pursuant to 12), above, to be informed by the ASTM International industry standards, and permits the written guidance or regulations to incorporate some or all of the ASTM International industry standards. Permits the DOJ’s written guidance or regulations to provide additional or alternative definitions, standards, processes, or requirements other than what is included in the industry standards published by ASTM International to promote the purposes of these provisions, and permits them to consider and incorporate industry standards for firearm blocking technology for three-dimensional printers published or adopted by a state governmental entity outside of California, as applicable.
- Permits the DOJ’s written guidance or regulations to provide for a self-attestation or self-certification process by which manufacturers of three-dimensional printers must certify to the DOJ that each three-dimensional printer make and model that the manufacturer sells, offers for sale, or intends to sell in California incorporates firearm blocking technology that meets the minimum performance standards published by the DOJ.
- Requires, commencing one year after the DOJ has published its written guidance or regulations for firearm blocking technology, that a manufacturer of any three-dimensional printer ensure that the three-dimensional printer is equipped with firearm blocking technology that meets the minimum performance standards in the DOJ’s guidance or regulations before the manufacturer sells, offers to sell, or transfers for consideration a three-dimensional printer to any person in California.
- Makes unlawful, commencing one year after the DOJ has published is written guidance or regulations for firearm blocking technology, to sell, offer for sale, or transfer for consideration a three-dimensional printer in the state of California that is not equipped with firearm blocking technology that meets the minimum performance standards set forth in the DOJ’s guidance or regulations.
- Exempts from these provisions:
- Printers used exclusively for the manufacturing of properties (props) in the entertainment industry; or
- A person who distributes, or causes the distribution of, digital firearm manufacturing code, as defined in Section 3273.60, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
- Specifies that, if the DOJ determines on July 1, 2029 that ASTM International has not published industry standards for firearm blocking technology for three-dimensional printers, the DOJ shall not be required to make any further determinations under these provisions.
- Permits the DOJ to promulgate regulations and develop forms and publications to implement the requirements of this bill, and permits the DOJ to update the minimum performance standards, including to reflect any future updates ASTM International makes to the industry standards described in Section 3273.633. Permits the DOJ to adopt regulations that provide for exceptions to these provisions, if those exceptions are consistent with the purpose of these provisions to prevent the use of three-dimensional printers to illegally produce firearms and machine gun conversion devices.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: No
According to the Senate Appropriations Committee:
Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund).
SUPPORT: (Verified 8/28/26)
Everytown for Gun Safety Action Fund (source)
American Academy of Pediatrics
Asian American Christian Collaborative
Beverly Hills High School Students Demand Action
Brady California
Brady United Against Gun Violence
California Chapter of the American College of Emergency Physicians
California Medical Association (CMA)
California Police Chiefs Association
CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO
Chapman University Students Demand Action
City of Alameda
City of Los Angeles
City of Santa Rosa
Former City Attorney Mike Feuer, City of Los Angeles
Giffords
GLMA: Health Professionals Advancing LGBTQ Equality
Indivisible Mid-peninsula
Jewish California
Moms Demand Action for Gun Sense in America
Newtown Action Alliance
Prosecutors Alliance Action
Riverside County Democratic Party
San Diegans for Gun Violence Prevention
San Diego City Attorney
San Diego County School Board Association
Students Demand Action At UC Davis
Students Demand Action for Gun Sense in America
UCLA Students Demand Action
Youth Alive!
OPPOSITION: (Verified 8/28/26)
3D Printing Nerd
ACLU California Action
California Rifle and Pistol Association, Inc.
Citizens Privacy Coalition of Santa Clara County
Community Manufacturing Initiative
Democratic Socialists of America - San Diego
Electronic Frontier Foundation
Esaero, Inc.
Fight for the Future
Free Software Foundation
Fulu Foundation
Gray Area
Gun Owners of California, Inc.
Ifixit
Inspired Flight Technologies
Invisible Pack Inc.
Make Good Inc.
Mantis Composites Inc.
Matterhackers
National Rifle Association - Institute for Legislative Action
Noisebridge Hackerspace
Oakland Privacy
Privacy Rights Clearinghouse
Prusa Usa, Inc.
Root Access Hackerspace
Secure Resilient Future Foundation
See3d, Inc.
Software Freedom Conservancy
Streamline Aerospace
Sudo Room Hackerspace
Thangs Inc.
Trust Automation
Zone 5 Technologies
West3d LLC
ARGUMENTS IN SUPPORT:
According to Everytown for Gun Safety, the sponsor of this bill:
The 3D printed gun crisis is not a faraway or abstract problem. It’s happening here in California, right now. And at the rate it’s increasing, this crisis will get much worse if we don’t use every tool we have. In just the six month span between September 2025 - February 2026, numerous instances of 3-D printed firearm manufacturing were uncovered by law enforcement agencies all around California. These incidents often include teenagers too young to legally purchase the types of firearms they are printing at home.
- In September 2025, Yuba County Sheriffs uncovered a “fully operational 3D-printing workshop” run by three men aged 19-38 and seized 8 handguns, several 3-D printed handgun frames, four assault weapons, one rifle, and assorted firearms parts.
- In October 2025, the Santa Clara County DA’s Gun Violence Task Force arrested a man who was on probation for domestic violence running a ghost gun manufacturing operation out of his apartment. The press release paints an alarming picture: “When task force members entered the prohibited person’s home, they found the 3D gun printer still working inside a closet, two loaded weapons, three nearly finished weapons, and 35 machine gun conversion devices. All of the weapons were considered “ghost guns” – made and sold with no serial number to avoid tracing and detection.”
- In November 2025, Santa Rosa Police detectives found an 18-year-old running a ghost gun manufacturing operation in his apartment, less than two years after arresting a 14-year-old illegally manufacturing a ghost gun with a 3-D printer.
- In February 2026, 3D-printed firearms were recovered in at least four more newsworthy incidents, spread around the state:
- Law enforcement in Santa Rosa seized over 165 guns and three 3D printers from a 22-year-old ghost guns manufacturer.18
- Victor Valley sheriffs found a 3D-printed assault rifle, over 130 Polymer80 jigs, 3D printer materials and a 3D printing guide for different firearms in a Lucerne Valley ghost guns arrest involving a man who was previously indicted and pled guilty for manufacturing guns for a gun trafficker.19
- A San Jose teenager was arrested with 27 finished or near-finished 3D-printed firearms, including DIY machine guns, and two 3D printers near his sneaker collection in his bedroom.
- A Daly City narcotics and identity theft investigation led to uncovering a San Francisco residence with several 3D-printed firearms, rifle components, and a 3D printer. […]
3D-printing firearms is the next wave of the ghost guns crisis, a problem California has been battling for years. The threat is evolving and our policy solutions need to evolve too. AB 2047 gives us a chance to get a step ahead of the criminals running underground ghost gun selling operations and the teenagers tempted to use a home 3-D printer in their bedroom or basement to print a deadly weapon. […]
While California’s recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without an intervention at the manufacturing stage. And there’s good news on this front: the technology already exists to equip printers to identify and block these dangerous firearm print jobs. AB 2047 will simply ensure that printer manufacturers actually deploy these technological solutions and stop the spread of DIY firearms before it accelerates any further.
Specifically, AB 2047 creates a new requirement that 3D printers sold in California must be equipped with firearm printing blocking technology by March 2029. The law will primarily be enforced through civil mechanisms similar to the existing Firearm Industry Responsibility Act (Civil Code section 3273.50 et seq.) and existing laws allowing for civil actions to enjoin Unlawful Firearm Manufacturing (Civil Code section 3273.60). The bill sets out a staged implementation process to evaluate and certify the underlying components of firearm printing blocking technology before imposing any kind of requirement on 3D printer manufacturers.
ARGUMENTS IN OPPOSITION:
According to the California Rifle & Pistol Association, which opposes AB 2047:
While framed as preventing unlawful manufacturing, this bill represents a costly, impractical, and constitutionally problematic burden on innovation, small businesses, and lawful hobbyists.
Key concerns:
- Technological Impracticality and Ineffectiveness: Detection algorithms and software controls can be evaded by technically skilled individuals through modifications, open-source alternatives, or altered files. Criminals will simply ignore the mandates or obtain printers out-of-state, while law-abiding makers and innovators face unnecessary barriers.
- Burdensome Regulation and Costs: Mandatory certification, attestations, testing, and quarterly DOJ lists will drive up prices for 3D printers, harm small businesses and California’s emerging tech sector, and stifle hobbyist innovation in areas far beyond firearms (prototyping, education, manufacturing).
- Constitutional Issues: The bill imposes prior restraints and technological mandates on tools that have substantial lawful uses, raising serious Second Amendment concerns under Bruen and due process issues. It effectively creates a de facto ban on non-compliant printers for most consumers.
- Bureaucratic Overreach: Placing the DOJ in charge of certifying complex software algorithms and policing printer sales adds layers of red tape without meaningfully addressing criminal activity, which is already illegal under existing manufacturing prohibitions.
ASSEMBLY FLOOR: 58-19, 5/26/26
AYES: Addis, Aguiar-Curry, Ahrens, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Bennett, Berman, Boerner, Bonta, Bryan, Calderon, Caloza, Carrillo, Connolly, Elhawary, Fong, Gabriel, Garcia, Gipson, Mark González, Haney, Harabedian, Hart, Irwin, Jackson, Kalra, Krell, Lee, Lowenthal, McKinnor, Nguyen, Ortega, Pacheco, Papan, Patel, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Michelle Rodriguez, Rogers, Blanca Rubio, Schiavo, Schultz, Sharp-Collins, Solache, Soria, Stefani, Valencia, Ward, Wicks, Wilson, Zbur, Rivas
NOES: Alanis, Castillo, Chen, Davies, DeMaio, Dixon, Ellis, Flora, Gallagher, Jeff Gonzalez, Hadwick, Hoover, Johnson, Macedo, Patterson, Sanchez, Ta, Tangipa, Wallis
NO VOTE RECORDED: Lackey, Muratsuchi, Celeste Rodriguez
Prepared by: Ian Dougherty / JUD. / (916) 651-4113
8/30/26 14:16:30
**** END ****
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-4171 | AB 2047 |
THIRD READING
Bill No: AB 2047
Author: Bauer-Kahan (D), et al.
Amended: 8/17/26 in Senate
Vote: 21
SENATE JUDICIARY COMMITTEE: 11-2, 6/23/26
AYES: Umberg, Allen, Ashby, Caballero, Durazo, Laird, Reyes, Stern, Wahab, Weber Pierson, Wiener
NOES: Niello, Valladares
SENATE PUBLIC SAFETY COMMITTEE: 5-1, 6/30/26
AYES: Arreguín, Caballero, Cortese, Pérez, Wiener
NOES: Seyarto
SENATE APPROPRIATIONS COMMITTEE: 5-2, 8/13/26
AYES: Cervantes, Cabaldon, Grayson, Richardson, Wahab
NOES: Seyarto, Dahle
ASSEMBLY FLOOR: 58-19, 5/26/26 - See last page for vote
SUBJECT: Firearms: 3-dimensional printing blocking technology
SOURCE: Everytown for Gun Safety Action Fund
DIGEST:
This bill makes it unlawful to sell or transfer a three-dimensional (3-D) printer in California that is not equipped with firearm blocking technology or not listed on the Department of Justice’s (DOJ) list of three-dimensional printers for which the manufacturer has submitted a complete self-attestation that the printer is equipped with firearm blocking technology; requests that ASTM International develop industry standards for firearm blocking technology for three-dimensional printer manufacture use; requires the DOJ to quarterly check whether ASTM International has published industry standards, as specified; requires the DOJ to publish guidance or regulations for firearm blocking technology adopting some or all of ASTM International’s industry standards, if the DOJ determines that ASTM International published such industry standards by July 1, 2029, or guidance or regulations adopting some or all of industry standards from another state governmental entity if ASTM International does not publish industry standards by the date and the DOJ determines that a state governmental entity outside of California has published such standards; requires the DOJ to publish a list of three-dimensional printers for which the manufacturers have submitted a self-attestation that the printer is equipped with firearm blocking technology; and provides a cause of action for a violation of these provisions, as specified.
ANALYSIS:
Existing law:
- Establishes the Firearm Industry Responsibility Act (FIRA) to prohibit firearm industry members from dealing in abnormally dangerous firearm-related products. Requires a firearm industry member to comply with the firearm industry standard of conduct, and makes it a violation of the firearm industry standard of conduct for a firearm industry member to fail to comply with specified provisions, including establishing, implementing, and enforcing reasonable controls. (Civil (Civ.) Code, §§ 3273.50 et seq.)
- Specifies that a firearm-related product includes a “firearm manufacturing machine,” and defines, for the purposes of FIRA, “firearm manufacturing machine” to mean a three-dimensional printer, as defined, a computer numerical control (CNC) milling machine, or a similar machine, that is marketed or sold, or is reasonably designed or intended to be used, to manufacture or produce firearms, firearm components, or firearm accessories. (Civ. Code § 32783.50(d).)
- Authorizes a person who has suffered harm because of a firearm industry member’s conduct, the Attorney General, a city attorney, and a county counsel to bring an action in court under FIRA for a violation of the firearm industry standard of conduct. (Civ. Code § 3273.52.)
- Permits a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means, including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, a member of the Armed Forces, or any law enforcement agency or forensic laboratory, as specified, or who commits specified criminal acts related to firearms. (Civ. Code § 3273.61.)
- Prohibits a person from selling, offering to sell, transferring, advertising, or marketing a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in the state to engage in conduct prohibited by Penal Code section 29185, or in a manner that otherwise knowingly or recklessly aids, abets, promotes, or facilitates conduct prohibited by that section.
- Creates a rebuttable presumption that a person is engaged in this prohibited conduct if they offer to sell, advertise, or market a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s ability to manufacture firearms, and the person sells or transfers the CNC milling machine or three-dimensional printer without verifying that the purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited, as specified. (Civ. Code § 3273.62.)
- Makes it unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civ. Code § 3273.625.)
- Defines “firearm” to mean a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion. (Pen. Code § 16520.)
This bill:
- Establishes the “California Firearm Printing Prevention Act,” and defines for the Act the following:
- “Department” to mean the Department of Justice;
- “firearm” to mean the definition of firearm in Penal Code section 16520;
- “firearm blocking technology” to mean hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts;
- “firearm blueprint detection algorithm” to mean a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flags any such files to prevent their use to manufacture a firearm or illegal firearm parts;
- “firearm precursor part” to have the same meaning as it is defined in Penal Code section 16531;
- “firmware design” to mean integration of a firearms blueprint detection algorithm directly into a three-dimensional printer’s firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts;
- “illegal firearm parts” to mean a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor;
- “integrated pre-print software design” to mean a limitation of a three-dimensional printer’s operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer’s proprietary software, and integration of a firearm blueprint detection algorithm into that pre-print software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts;
- “Pistol convertor” to have the same meaning as it is defined in Penal Code section 17015;
- “Software controls process” to mean a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearm blueprint detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts; and
- “Three-dimensional printer” to have the same meaning as defined in Civil Code section 3273.60.
- Requests ASTM International to develop industry standards for firearms blocking technology consistent with this section for three-dimensional printer manufacturer use in order to comply with these sections, and encourages these industry standards to require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code;
- Detect and identify any such files that can be used to instruct a three-dimensional printer to produce a firearm or illegal firearm parts; and
- Flag any disallowed files for print rejection by a software control process.
- Specifies that the industry standards for firearm blueprint detection algorithms are encouraged to require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly shared on internet forums to detect those files and modified versions of those files, and, in order to meet these requirements, permits the standards to require blueprint detection algorithms to receive updated information from an inventory of firearm blueprint files and illegal firearm parts blueprint files, including but not limited to, a library maintained by any state agency or out-of-state agency, academic institution, or nongovernmental entity.
- Specifies that Civil Code section 3273.61 does not apply to a person or entity who distributes, or causes the distribution of, a digital firearm manufacturing code, including firearms blueprint files and illegal firearm parts blueprint files, solely for the bona fide purpose of developing, refining, and testing the functionality of firearm blocking technology or maintaining an updated library of digital firearm manufacturing code files solely for that bona fide purpose.
- Encourages the industry standards for firearm blueprint algorithms to include standards for acceptable false-positive and false-negative rates in detection algorithm performance, but prohibits the standards from requiring that a firearm blueprint detection algorithm produce a false-negative rate of zero corresponding to a perfect success rate at detecting disallowed files, as specified.
- Encourages the industry standards for firearm blueprint detection algorithms to require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and frequency that reasonably considers the rate of innovation for the design and availability of new firearm blueprint files, as specified, and encourages the industry standards to include a process for periodically reviewing emerging detection software techniques, including advanced forms of image recognition and geometric search functionality.
- Encourages the industry standards for software controls processes to include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, and prohibits the industry standards from requiring that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Encourages the industry standards for software controls processes to set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including that the standards-setting process shall consider: firmware design; integrated pre-print software design; and any other form, including handshake authentication design or other design forms directed towards open-source compatibility, if the software controls process meets all performance requirements of the standard and is either at least as effective or at least as resistant to being defeated by a technically skilled user as the above-listed design forms, as specified.
- Encourages the industry standards for software controls processes to include both: for firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing; and for integrated pre-print software design, guidance for how vendors must demonstrate that printers will accept print jobs exclusively through authorized and validated software systems, as specified.
- Encourages the industry standards for software controls processes to require that software controls processes have the capacity, to a high degree of reliability, to substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm.
- Requires, from July 1, 2027 to July 1, 2029, that the DOJ check on a quarterly basis whether ASTM International has published industry standards for firearm blocking technology.
- If the DOJ determines by July 1, 2029 that ASTM International has published or adopted industry standards for firearm blocking technology, requires the DOJ to publish written guidance or regulations within 18 months after determining that ASTM International has published industry standards for firearm blocking technology. Requires this written guidance or regulations to incorporate some or all of the industry standards published by ASTM International, and to establish that compliance with the industry standards constitutes compliance with the requirement that manufacturers equip three-dimensional printers sold in California with firearm blocking technology, except as otherwise required.
- If the DOJ determines ASTM International has not published such industry standards by July 1, 2029, requires the DOJ to determine, on or before August 1, 2029, whether a state governmental entity outside California has published or adopted industry standards for firearm blocking technology after a good-faith investigation of the available technology. If the DOJ determines by August 1, 2029 that another state governmental entity has published or adopted industry standards for firearm blocking technology, requires the DOJ to publish written guidance or regulations no later than 18 months that describe the minimum performance standards for firearm blocking technology that a three-dimensional printer manufacturer must meet to comply with these provisions. Requires that this guidance or regulations incorporate some or all of the industry standards, and establishes that compliance with those industry standards constitutes compliance with the requirement that manufacturers equip three-dimensional printers sold in California with firearm blocking technology, except as otherwise required.
- If the DOJ determines on July 1, 2029 that ASTM International did not publish industry standards for firearm blocking technology because ASTM International determined that it is not technologically feasible for three-dimensional printers to be equipped with firearm blocking technology, prohibits the DOJ from making any further determinations regarding whether a state governmental entity outside California has published or adopted industry standards, as specified.
- Requires, six months after the publication of DOJ’s performance standards or regulations, as specified, that any business that produces or manufactures three-dimensional printers for sale or transfer in California to submit to the DOJ an attestation, for each make and model of printer they intend to sell in California, that the manufacturer has equipped the printer with a firearm blueprint detection algorithm and a software controls process, and which confirms that the manufacturer tested and confirmed the functionality of the firearm blocking technology.
- Provides the Attorney General with the authority to investigate and inspect the submission and the models if the attestation is incomplete or there exists information that indicates that the make and model may not be effectively equipped with firearm blocking technology, as specified. Specifies that any make and model of three-dimensional printer under investigation and inspection may be identified as having an incomplete attestation.
- Permits a self-attestation form to include instructions to manufacturers on how to test the functionality of firearm blocking technology and how to submit the self-attestation form.
- Requires the self-attestation to include: the make and model of the three-dimensional printer; confirmation that the manufacturer has equipped that make and model with a firearm blocking technology; confirmation of testing the functionality of the firearm blocking technology once installed as specified; and confirmation that the attestation form is submitted under penalty of perjury.
- Requires the DOJ, nine months after the publication of the DOJ’s performance standards or regulations, as specified, to publish a list of the makes and models of three-dimensional printers that have complete attestations, and of any makes and models that have an incomplete attestation. Requires this list to be updated no less frequently than on a quarterly basis and be made accessible on the DOJ’s website, and requires the retailers and distributors of three-dimensional printers to consult the list to ensure their inventory consists of compliant three-dimensional printers.
- Requires a business that produces or manufactures three-dimensional printers to, before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California:
- equip the printer with firearm blocking technology that meets the performance standards published by the DOJ;
- submit a self-attestation of installation of the firearm blocking technology to the DOJ.
- Specifies that any business that sells, offers to sell, distributes, or transfers a three-dimensional printer in California must consult the DOJ’s list. Makes it unlawful to sell or transfer a three-dimensional printer in California that is not equipped with a firearm blocking technology and is not listed on the DOJ’s list.
- Does not apply the requirements described in 15) through 16), above, to:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined;
- Printers manufactured for and sold exclusively to the state or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes;
- Printers manufactured exclusively for or sold directly to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors, except that software required by these provisions must be installed prior to the resale of the printer to a user outside of these exempted industries;
- Printers used exclusively for the manufacture of properties (props) in the entertainment industry; or
- Printers sold or transferred in private transactions that were originally purchased before the publication of the DOJ’s list.
- Permits a civil action against a person who sells, offers to sell, or transfers a three-dimensional printer in California that is not equipped with firearm blocking technology, and against a person who knowingly files an attestation containing false information. For a civil action for selling a printer without firearm blocking technology, it is an affirmative defense against a retailer, distributor, wholesaler, importer, or other transferor that they only sold or transferred the three-dimensional printer after verifying that that it was on the DOJ’s list as having a complete attestation.
- Permits a person who suffers harm in California as a result of a violation of these provisions to bring a civil action pursuant to 18), above, and permits such a person to seek compensatory damages as well as injunctive relief. Additionally permits the Attorney General, county counsel, or a city attorney to bring an action for a violation of these provisions, and permits them to seek a civil penalty of no more than $25,000 for each violation as well as injunctive relief. Specifies that a prevailing plaintiff is entitled to recover reasonable attorney’s fees and costs.
- Makes the provisions described in 15) through 18), above, operative six months after the publication of the list of three-dimensional printers whose manufacturers have submitted complete self-attestations.
- Permits the DOJ to promulgate regulations and develop forms and publications to implement the requirements of this bill, including but not limited to, procedures for manufacturers to update their attestation forms when industry standards have been updated and to specify the process for submitting attestation forms for new models of three-dimensional printers introduced after the timeline for self-attestations, and permits the DOJ to adopt regulations that provide for exceptions to these provision that is consistent with the purpose of these provisions.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: No
According to the Senate Appropriations Committee:
Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund).
SUPPORT: (Verified 8/14/26)
Everytown for Gun Safety Action Fund (source)
American Academy of Pediatrics
Asian American Christian Collaborative
Beverly Hills High School Students Demand Action
Brady California
Brady United Against Gun Violence
California Chapter of the American College of Emergency Physicians
California Medical Association
California Police Chiefs Association
CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO
Chapman University Students Demand Action
City of Alameda
City of Los Angeles
City of Santa Rosa
Former City Attorney Mike Feuer, City of Los Angeles
Giffords
GLMA: Health Professionals Advancing LGBTQ Equality
Indivisible Mid-peninsula
Jewish California
Moms Demand Action for Gun Sense in America
Newtown Action Alliance
Prosecutors Alliance Action
Riverside County Democratic Party
San Diegans for Gun Violence Prevention
San Diego City Attorney
San Diego County School Board Association
Students Demand Action At UC Davis
Students Demand Action for Gun Sense in America
UCLA Students Demand Action
Youth Alive!
OPPOSITION: (Verified 8/14/26)
3D Printing Nerd
ACLU California Action
California Rifle and Pistol Association, Inc.
Citizens Privacy Coalition of Santa Clara County
Community Manufacturing Initiative
Democratic Socialists of America - San Diego
Electronic Frontier Foundation
Esaero, Inc.
Fight for the Future
Free Software Foundation
Fulu Foundation
Gray Area
Gun Owners of California, Inc.
Ifixit
Inspired Flight Technologies
Invisible Pack Inc.
Make Good Inc.
Mantis Composites Inc.
Matterhackers
National Rifle Association - Institute for Legislative Action
Noisebridge Hackerspace
Oakland Privacy
Privacy Rights Clearinghouse
Prusa Usa, Inc.
Root Access Hackerspace
Secure Resilient Future Foundation
See3d, Inc.
Software Freedom Conservancy
Streamline Aerospace
Sudo Room Hackerspace
Thangs Inc.
Trust Automation
Zone 5 Technologies
West3d LLC
ARGUMENTS IN SUPPORT:
According to Everytown for Gun Safety, the sponsor of this bill:
The 3D printed gun crisis is not a faraway or abstract problem. It’s happening here in California, right now. And at the rate it’s increasing, this crisis will get much worse if we don’t use every tool we have. In just the six month span between September 2025 - February 2026, numerous instances of 3-D printed firearm manufacturing were uncovered by law enforcement agencies all around California. These incidents often include teenagers too young to legally purchase the types of firearms they are printing at home.
- In September 2025, Yuba County Sheriffs uncovered a “fully operational 3D-printing workshop” run by three men aged 19-38 and seized 8 handguns, several 3-D printed handgun frames, four assault weapons, one rifle, and assorted firearms parts.
- In October 2025, the Santa Clara County DA’s Gun Violence Task Force arrested a man who was on probation for domestic violence running a ghost gun manufacturing operation out of his apartment. The press release paints an alarming picture: “When task force members entered the prohibited person’s home, they found the 3D gun printer still working inside a closet, two loaded weapons, three nearly finished weapons, and 35 machine gun conversion devices. All of the weapons were considered “ghost guns” – made and sold with no serial number to avoid tracing and detection.”
- In November 2025, Santa Rosa Police detectives found an 18-year-old running a ghost gun manufacturing operation in his apartment, less than two years after arresting a 14-year-old illegally manufacturing a ghost gun with a 3-D printer.
- In February 2026, 3D-printed firearms were recovered in at least four more newsworthy incidents, spread around the state:
- Law enforcement in Santa Rosa seized over 165 guns and three 3D printers from a 22-year-old ghost guns manufacturer.18
- Victor Valley sheriffs found a 3D-printed assault rifle, over 130 Polymer80 jigs, 3D printer materials and a 3D printing guide for different firearms in a Lucerne Valley ghost guns arrest involving a man who was previously indicted and pled guilty for manufacturing guns for a gun trafficker.19
- A San Jose teenager was arrested with 27 finished or near-finished 3D-printed firearms, including DIY machine guns, and two 3D printers near his sneaker collection in his bedroom.
- A Daly City narcotics and identity theft investigation led to uncovering a San Francisco residence with several 3D-printed firearms, rifle components, and a 3D printer. […]
3D-printing firearms is the next wave of the ghost guns crisis, a problem California has been battling for years. The threat is evolving and our policy solutions need to evolve too. AB 2047 gives us a chance to get a step ahead of the criminals running underground ghost gun selling operations and the teenagers tempted to use a home 3-D printer in their bedroom or basement to print a deadly weapon. […]
While California’s recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without an intervention at the manufacturing stage. And there’s good news on this front: the technology already exists to equip printers to identify and block these dangerous firearm print jobs. AB 2047 will simply ensure that printer manufacturers actually deploy these technological solutions and stop the spread of DIY firearms before it accelerates any further.
Specifically, AB 2047 creates a new requirement that 3D printers sold in California must be equipped with firearm printing blocking technology by March 2029. The law will primarily be enforced through civil mechanisms similar to the existing Firearm Industry Responsibility Act (Civil Code section 3273.50 et seq.) and existing laws allowing for civil actions to enjoin Unlawful Firearm Manufacturing (Civil Code section 3273.60). The bill sets out a staged implementation process to evaluate and certify the underlying components of firearm printing blocking technology before imposing any kind of requirement on 3D printer manufacturers.
ARGUMENTS IN OPPOSITION:
According to the California Rifle & Pistol Association, which opposes AB 2047:
While framed as preventing unlawful manufacturing, this bill represents a costly, impractical, and constitutionally problematic burden on innovation, small businesses, and lawful hobbyists.
Key concerns:
- Technological Impracticality and Ineffectiveness: Detection algorithms and software controls can be evaded by technically skilled individuals through modifications, open-source alternatives, or altered files. Criminals will simply ignore the mandates or obtain printers out-of-state, while law-abiding makers and innovators face unnecessary barriers.
- Burdensome Regulation and Costs: Mandatory certification, attestations, testing, and quarterly DOJ lists will drive up prices for 3D printers, harm small businesses and California’s emerging tech sector, and stifle hobbyist innovation in areas far beyond firearms (prototyping, education, manufacturing).
- Constitutional Issues: The bill imposes prior restraints and technological mandates on tools that have substantial lawful uses, raising serious Second Amendment concerns under Bruen and due process issues. It effectively creates a de facto ban on non-compliant printers for most consumers.
- Bureaucratic Overreach: Placing the DOJ in charge of certifying complex software algorithms and policing printer sales adds layers of red tape without meaningfully addressing criminal activity, which is already illegal under existing manufacturing prohibitions.
ASSEMBLY FLOOR: 58-19, 5/26/26
AYES: Addis, Aguiar-Curry, Ahrens, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Bennett, Berman, Boerner, Bonta, Bryan, Calderon, Caloza, Carrillo, Connolly, Elhawary, Fong, Gabriel, Garcia, Gipson, Mark González, Haney, Harabedian, Hart, Irwin, Jackson, Kalra, Krell, Lee, Lowenthal, McKinnor, Nguyen, Ortega, Pacheco, Papan, Patel, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Michelle Rodriguez, Rogers, Blanca Rubio, Schiavo, Schultz, Sharp-Collins, Solache, Soria, Stefani, Valencia, Ward, Wicks, Wilson, Zbur, Rivas
NOES: Alanis, Castillo, Chen, Davies, DeMaio, Dixon, Ellis, Flora, Gallagher, Jeff Gonzalez, Hadwick, Hoover, Johnson, Macedo, Patterson, Sanchez, Ta, Tangipa, Wallis
NO VOTE RECORDED: Lackey, Muratsuchi, Celeste Rodriguez
Prepared by: Ian Dougherty / JUD. / (916) 651-4113
8/18/26 13:05:12
**** END ****
SENATE COMMITTEE ON
Senator Sabrina Cervantes, Chair
2025 - 2026 Regular Session
AB 2047 (Bauer-Kahan) - Firearms: 3-dimensional printing blocking technology
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
AB 2047 would require the Department of Justice (DOJ) to publish guidance on performance standards for firearm printing detection algorithm for use by three-dimensional printer manufacturers.
*********** ANALYSIS ADDENDUM – SUSPENSE FILE ***********
The following information is revised to reflect amendments
adopted by the committee on August 13, 2026
Fiscal Impact:
Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund).
Author Amendments:
Require the Attorney General to check on a quarterly basis, whether ASTM International has published standards as specified, and if so, to publish written guidance if ASTM International has published industry standards for firearm blocking technology, as specified.
Committee Amendments:
Delete enforcement provisions and narrow scope of the bill.
-- END --
SENATE COMMITTEE ON
Senator Sabrina Cervantes, Chair
2025 - 2026 Regular Session
AB 2047 (Bauer-Kahan) - Firearms: 3-dimensional printing blocking technology
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
AB 2047 would require the Department of Justice (DOJ) to publish guidance on performance standards for firearm printing detection algorithm for use by three-dimensional printer manufacturers.
Fiscal Impact:
Major costs over a 20 month period to meet the September 1, 2028 deadline for the publishing of performance standards. Major cost over the following 15 months to establish an attestation regulatory process to allow three dimensional printers to be sold or transferred beginning December 1, 2029. Costs to DOJ to establish and operate this program overall are unquantifiable and will require the hiring of personnel and securing technological expertise outside DOJ’s existing scope and capabilities (General Fund).
Potentially significant court cost pressure for civil enforcement actions brought by the Attorney General, county counsel, city attorneys, and private plaintiffs under the bill’s civil penalty and private right of action provisions. An eight-hour court day costs approximately $10,500 based on the hourly rate of court personnel including at minimum the judge, clerk, bailiff, court reporter, jury administrator, administrative staff, and jury per-diems. While the courts are not funded on a workload basis, an increase in workload could result in delayed court services and would put pressure on the General Fund to fund additional staff and resources. The FY 2026-27 Budget appropriated $70 million General Fund for this purpose (Trial Court Trust Fund, General Fund).
Proposed Law:
By September 1, 2028, DOJ shall publish guidance on performance standards for firearm blueprint detection algorithms and for software control processes for three-dimensional printer manufacturers.
By March 1, 2029, any business that produces or manufactures three-dimensional printers for sale or transfer in California would be required to submit to DOJ an attestation for each make and model of printer, confirming, among other things, that the manufacturer has equipped that make and model with a firearm blueprint detection algorithm.
By June 1, 2029, DOJ would publish a list of makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations. The list shall be updated quarterly and made available on the DOJ website.
Beginning December 1, 2029, the sale or transfer of three-dimensional printers that are not equipped with firearm blocking technology and that are not on the DOJ list would be prohibited.
Staff Comments:
Three dimensional printers manufactured for and sold exclusively to specified agencies and industries, that are not sold on the consumer retail market, would be exempt from the provisions of the bill.
A civil action may be brought against a person who does either of the following:
Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
It would be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the DOJ list and not designated as having an incomplete attestation.
Knowingly files an attestation to DOJ containing false information. The filing of a civil action under this section would not preclude potential criminal prosecution for perjury.
A person who has suffered harm in California as a result of a violation of Civil Code 3273.636 may bring an action in a court of competent jurisdiction to establish that a person has violated this section and may seek compensatory damages as well as injunctive relief sufficient to prevent further violation of the law.
The Attorney General, a county counsel, or a city attorney may bring an action to establish that a person has violated Civil Code 3273.636 and may seek a civil penalty not to exceed $25,000 for each violation, as well as injunctive relief sufficient to prevent further violation of the law. A prevailing plaintiff shall be entitled to recover reasonable attorney’s fees and costs.
SENATE COMMITTEE ON PUBLIC SAFETY
Senator Jesse Arreguín, Chair
2025 - 2026 Regular
Bill No: AB 2047 Hearing Date: June 30, 2026
Author: | Bauer-Kahan | ||
Version: | June 15, 2026 | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | AB | ||
Subject: Firearms: 3-dimensional printing blocking technology
HISTORY
Source: Everytown for Gun Safety Action Fund; Moms Demand Action for Gun Sense in America; Students Demand Action for Gun Sense in America
Prior Legislation: AB 1127 (Gabriel) Ch. 572, Stats. of 2025
AB 1263 (Gipson), Ch. 636, Stats. of 2025
AB 97 (Rodriguez), Ch. 233, Stats. of 2023
AB 1089 (Gipson), Ch. 243, Stats. of 2023
AB 1420 (Berman), Ch. 245, Stats. of 2023
AB 1594 (Ting), Ch. 98, Stats. of 2022
AB 857 (Cooper), Ch. 60, Stats. of 2016
Support: Asian American Christian Collaborative; Beverly Hills High School Students Demand Action; California Chapter of the American College of Emergency Physicians; California Moms Demand Action; California Police Chiefs Association; CFT – A Union of Educators & Classified Professionals, AFT, AFL-CIO; Chapman University Students Demand Action; Former City Attorney Mike Feuer, City of Los Angeles; GLMA: Health Professionals Advancing LGBTQ Equality; Indivisible Mid-Peninsula; Newtown Action Alliance; Prosecutors Alliance Action; San Diegans for Gun Violence Prevention; San Diego County School Board Association; Students Demand Action at U.C. Davis; UCLA Students Demand Action; Youth Alive!
Opposition: 3d Printing Nerd; ACLU California Action; California Rifle and Pistol Association; Californians United for a Responsible Budget; Citizens Privacy Coalition of Santa Clara County; Community Manufacturing Initiative; Democratic Socialists of America, San Diego; Electronic Frontier Foundation; ESAero, INC;. Fight for the Future; Free Software Foundation; FULU Foundation; Gray Area; Gun Owners of California; iFixit; Initiate Justice; Inspired Flight Technologies; Invisible Pack; Leafeye; Mantis Composites; Matterhackers; National Rifle Association-Institute for Legislative Action; Noisebridge Hackerspace; Oakland Privacy; Privacy Rights Clearinghouse; Repair.org; Root Access Hackerspace; Secure Resilient Future Foundation; Software Freedom Conservancy; Streamline Aerospace; Sudo Room Hackerspace; Trust Automation; West3d; Zone 5 Technologies
Assembly Floor Vote: 58 - 19
PURPOSE
The purpose of this bill is to require the Department of Justice (DOJ) to publish written guidance on performance standards for firearm blueprint detection algorithms for use by 3Dimensional (3D) printer manufacturers; to require, on or before March 1, 2029, any business that produces or manufactures 3D printers to submit to the DOJ an attestation for each make and model they intend to sell or transfer in California, and retain a list of such manufacturers; to make it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3D printer with the intent to manufacture firearms or to knowingly transfer a modified 3D printer, as specified with the intent to facilitate the unlawful manufacture of firearms.
Existing law establishes the “Firearm Industry Responsibility Act” (hereinafter, “FIRA”) which allows for civil actions to be brought against firearm industry members who deal in abnormally dangerous firearm-related products. (Civ. Code, §§ 3273.50 et seq.)
Existing law provides that a firearm industry member must comply with the firearm industry standard of conduct; and makes it a violation of the firearm industry standard of conduct for a firearm industry member to fail to comply with any requirement below:
- A firearm industry member shall do both of the following:
- Establish, implement, and enforce reasonable controls.
- Take reasonable precautions to ensure that the firearm industry member does not sell, distribute, or provide a firearm-related product to a downstream distributor or retailer of firearm-related products who fails to establish, implement, and enforce reasonable controls.
- A firearm industry member shall not manufacture, market, import, offer for wholesale, or offer for retail sale a firearm-related product that is likely to create an unreasonable risk of harm to public health and safety, as provided.
- A firearm industry member shall not engage in any conduct related to the sale or marketing of firearm-related products, as specified. (Civ. Code, § 3273.51, subds. (a)-(d).)
Existing law provides that prior to completing the sale or delivery in California or to a California resident of a firearm accessory or a firearm manufacturing machine, as defined, or of a firearm barrel unattached to a firearm, a firearm industry member shall comply with specified notice and age-verification requirements. (Civ. Code, § 3273.51, subd. (e)(1).)
Existing law provides that a civil action may be brought against a person who knowingly does either of the following:
Distributes or causes to be distributed, by any means including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, member of the Armed Forces of the United States or the National Guard, while on duty and acting within the scope and course of employment, or any law enforcement agency or forensic laboratory.
Commits an act that violates prohibitions related to manufacturing firearms using a computer numerical control (CNC) milling machine or 3D printer, regardless of whether the act results in a conviction. (Civ. Code. § 3273.61, subd. (a).)
Existing law provides that it is unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms, punishable civilly, and that the Attorney General, county counsel, city attorney, or a person who has suffered harm as a result of a violation may bring an action against the violating party. (Civ. Code. § 3273.625, subd. (a), (c).)
Existing law provides that, except as provided, any person who, with knowledge of any change, alteration, removal or obliteration of a specified identifying mark on a firearm, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturer’s number or other mark of identification, including any distinguishing number or mark assigned by the DOJ, changed, altered, removed, or obliterated (hereinafter, an “unserialized firearm”) is guilty of a misdemeanor. (Pen. Code, § 23920, subd. (a).)
Existing law defines “firearm precursor part” as any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted. (Pen. Code, § 16531.)
Existing law defines a “pistol converter” as any device or instrument that when installed in or attached to the rear of the slide of a semiautomatic pistol, replaces the backplate, and interferes with the trigger mechanism and thereby enables the pistol to shoot automatically more than one shot by a single function of the trigger, and includes a device manufactured using a 3D printer. (Pen. Code, § 17015.)
Existing law sets forth a process for the licensing of firearms manufacturers by the DOJ. (Pen. Code, §§ 29050, et. seq.)
Existing law prohibits the manufacture of more than 3 firearms within the state in a calendar year unless the person is licensed to manufacture firearms pursuant to California law. (Pen. Code, § 29010.)
Existing law provides that no person, other than a state-licensed firearms manufacturer, shall use a CNC machine or 3D printer to manufacture a firearm, and that it is unlawful to sell, offer to sell, transfer, possess, purchase, or receive a CNC milling machine or 3D printer that has the sole or primary function of manufacturing firearms, as specified. (Pen. Code, § 29185, subds. (a)-(c).)
Existing law defines “3D printer” as a computer-aided manufacturing device capable of producing a 3D object from a 3D digital model through an additive manufacturing process that involves the layering of two-dimensional cross sections formed of a resin or similar material that are fused together to form a 3D object. (Pen. Code, § 29185, subd. (g).)
Existing law provides that it is unlawful to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms, or to knowingly or willfully aid, abet, promote, or facilitate the unlawful manufacture of firearms, punishable as a misdemeanor. (Pen. Code, § 29186, subds. (a), (c).)
Existing law specifies that the “the unlawful manufacture of firearms” includes any of the following:
- The manufacture of a firearm by a minor, or by a person who is prohibited from owning or possessing firearms under California law.
- The manufacture of four or more firearms within the state in the same calendar year by an individual who is not licensed to manufacture firearms pursuant to California law.
- The manufacture of any firearm using a 3D printer or CNC milling machine by an individual who is not licensed to manufacture firearms pursuant to California law.
- The manufacture of a firearm by a person who is not a federally licensed firearms manufacturer, for the purpose of selling or transferring ownership of that firearm to another person who is not a federally licensed firearms manufacturer.
- The manufacture of a firearm for the purpose of selling, loaning, or transferring the firearm to another person, with the intent to complete the sale, loan, or transfer without a required background check on the transferee initiated by a licensed firearms dealer.
- The manufacture of specified prohibited firearms. (Pen. Code, § 29186, subd. (b).)
This bill defines the following terms as follows:
- “Firearm blocking technology” means hardware, firmware, or other integrated technological measures capable of ensuring a 3D printer will not proceed to any print job unless the underlying 3D printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- “Firearm blueprint detection algorithm” means a software service that evaluates 3D printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a 3D printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
- “Firmware design” means integration of a firearms blueprint detection algorithm directly into a 3D printer’s firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- “Illegal firearm parts” means a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
- “Integrated pre-print software design” means a limitation of a 3D printer’s operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer’s proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- “Software controls process” means a system designed to stop a 3D printer from initiating any print job unless the underlying 3D printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
This bill requires the DOJ, on or before September 1, 2028, to publish written guidance on performance standards for firearm blueprint detection algorithms for 3D printer manufacturer use in complying with other provisions of this bill, as specified, and provides that the DOJ may seek input from relevant stakeholders and technical experts in this task.
This bill specifies that the performance standards must require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to complete specified tasks.
This bill provides that the performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly shared on internet forums to detect those files and modified versions of those files, as specified.
This bill provides that the performance standards shall require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency that reasonably considers the rate of innovation for the design and availability of new firearm blueprint files, consistent with evolving threat landscapes, technology maturity, and operational feasibility.
This bill requires the DOJ, on or before September 1, 2028, to publish written guidance on performance standards for software controls processes for 3D printer manufacturer use in complying with other sections of this bill, subject to requirements similar to those for firearm blueprint detection algorithms.
This bill provides that the performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm, and shall include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, as specified.
This bill provides that the performance standards shall set out options for design forms that may be used for a software controls process integration into a 3D printer, as specified.
This bill provides that on or before March 1, 2029, any business that produces or manufactures 3D printers for sale or transfer in California shall submit to the DOJ an attestation form for each make and model of printer they intend to make available for sale or transfer in California, which must include specified information.
This bill provides that if the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, as specified.
This bill provides that on or before June 1, 2029, the DOJ shall publish a list (hereinafter “the list”) of all the makes and models of 3D printers whose manufacturers have submitted complete self-attestations and any makes and models of 3D printers that have an incomplete attestation on file.
This bill provides that the list shall be updated no less frequently than on a quarterly basis and be made accessible on the DOJ website.
This bill requires, commencing December 1, 2029, any business that produces or manufactures 3D printers for sale in California to take both of the following steps:
- Before any 3D printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the 3D printer with firearm blocking technology, as provided.
- Before any 3D printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the DOJ.
This bill provides that any business that sells, offers to sell, distributes, or transfers for consideration a 3D printer in California shall consult the list published by the DOJ.
This bill provides that it shall be unlawful to sell or transfer for consideration a 3D printer in California that is not equipped with firearm blocking technology and on the list published by DOJ.
This bill provides that the above requirements shall not apply to the following printers:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined.
- Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
- Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
- Printers sold or transferred in private transactions that were originally purchased before the publication of the list.
This bill provides that a civil action may be brought against a person who either sells or offers to sell a 3D printer in California that is not equipped with firearm blocking technology or knowingly files an attestation containing false information, and that such action may be brought by a private individual who has suffered harm as the result of a violation, or by the Attorney General, county counsel, or city attorney, as specified.
This bill makes it a crime, punishable as a misdemeanor, to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justice’s list of three-dimensional printers eligible for sale in California, as provided, with the intent to facilitate the unlawful manufacture of firearms.
This bill includes a severability clause.
COMMENTS
- Need for This Bill
According to the author:
California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child. As technology evolves, it’s important that consumer protections change with it to ensure the safety of our communities.
- 3D Printed Firearms and the Ghost Gun Crisis
In the United States, traditional firearms are generally produced by licensed manufacturers and sold through licensed gun dealers. Federal law requires all guns manufactured in the United States and imported from abroad to have serial numbers, typically displayed on the back of the frame.[1] By contrast, “ghost guns” are manufactured in parts – designated “firearm precursor parts” under California law – which can be acquired without a background check and can easily be assembled by an unlicensed buyer.[2] Ghost guns are designed to avoid regulation by being sold in DIY kits containing their component parts, which, individually, are unregulated, but when assembled form a fully functional firearm. Ghost guns are also unserialized, meaning they do not possess any identifying marks that allow them to be traced by law enforcement.
Advances in technology have led to an increasing number of ghost guns being produced via consumer-level computer operated machines such as 3D printers and CNC milling machines. CNC milling machines are machines capable of automatically processing raw materials such as metal, plastic, wood or composite into digitally modeled shapes based solely on programed instructions, without the need for a human operator. CNC milling machines use subtractive manufacturing: essentially breaking down a raw material until the desired product is created. 3D printers, by contrast, use an additive manufacturing process which lays down consecutive layers of material to generate various products. 3D printers have grown significantly in popularity in recent years - the first 3D-printed gun, the “Liberator,” was produced in 2013, and since then its design has become widely available online.[3] Since 2013, however, the quality and design of 3D printed firearms have improved significantly, and the process has become more widespread. For instance, a company known as “Ghost Gunner” is currently marketing its latest CNC milling machine, the Ghost Gunner 3-S, which costs only $3,250 and comes programmed to complete several fully functional assault-style weapons.[4]
In recent years, advocates for the 3-D printing of firearms have coalesced into the 3d-printed gun rights movement, also known as 3D2A (referring to the Second Amendment), which generally believes in unfettered freedom to print firearms and has flourished in online communities.[5] 3D2A generally uses online platforms, such as “the Gatalog” and “DEFCAD,” to host and distribute digital firearm blueprints, which can often be downloaded and integrated into the software for 3D printers.[6] Some 3D2A designers have even gone as far as to mock gun reform advocacy groups – including one of this bill’s co-sponsors – with the names and logos associated with their designs. In 2021, Everytown for Gun Safety sued DEFCAD and the Gatalog after one designer named a firearm magazine “the Everytown Mag” and another designer used the Everytown logo on a firearm. The lawsuit eventually settled, with the defendants agreeing to remove the infringing files from both platforms, but the lawsuit revealed several details about the figures involved, collaboration within the movement, and tensions between different camps of 3D2A.[7]
In October 2024, the DOJ’s Office of Gun Violence Prevention released a report examining the impact of ghost guns in California, including statistics on ghost guns recovered by law enforcement agencies. Notably, from 2013 to 2021, the number of ghost guns recovered by law enforcement from suspected criminal activity increased dramatically every year, from just three in 2013 (.01% of all reported crime guns) to nearly 11,000 in 2021 (18.5% of reported crime guns).[8] Between 2019 and 2021 in particular, amid gun violence spikes nationwide, law enforcement agencies reported a 30% increase in the total number of recovered crime guns, with a staggering 592% increase in unserialized ghost guns.[9] Since the number of recovered ghost guns peaked in late 2021into early 2022, however, the state has seen a consistent decline in that statistic – from 2021 to 2023, law enforcement agencies reported a 23% overall decrease in the number of recovered ghost guns, and the fourth quarter of 2023 (the most recent year analyzed by the report) saw the lowest number of recovered ghost guns since early 2020.[10]
Nevertheless, the author cites several recent incidents involving seizures of ghost guns, including 3D printed firearms, highlighting the need for additional reform. These incidents include the seizure of over 165 guns and 3D printing equipment from a single manufacturer in Santa Rosa, a previously convicted gun trafficker caught with a 3D printed assault rifle, ghost gun parts and a firearm printing guide in San Bernardino County, and the arrest of a San Jose teenager with two 3D weapon printers and 27 finished or near-finished 3D printed guns in his bedroom[11]
- Relevant Federal and State Law Regarding Ghost Guns and Firearm Manufacturing
Existing federal law requires all federally licensed firearms dealers (FFLs) to conduct background checks on prospective firearm purchasers.[12] In order to process those background checks, the Federal Bureau of Investigation (FBI) created the National Instant Criminal Background Check System (NICS), a digital catalog of records integrating three separate national databases which FFLs can query when processing the purchase of a firearm.[13] Existing federal law also requires FFLs to “identify by means of a serial number engraved or cast on the receiver or frame of the weapon” each firearm manufactured in, or imported into, the United States.[14]
These requirements, part of the Gun Control Act of 1968 (GCA), apply exclusively to “firearms,” a term defined broadly under federal law to include “(A) any weapon (including a starter gun) which will or is designed to or may readily be converted to expel a projectile by the action of an explosive; (B) the frame or receiver of any such weapon; (C) any firearm muffler or firearm silencer; or (D) any destructive device.”[15] However, the definitions and regulations set forth in the GCA have not kept pace with advances in gun manufacturing technology, rendering many privately manufactured firearms (PMFs) not subject to these serialization and background check requirements. Consequently, in April 2022 the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) adopted Final Rule 2021R-05F, which, among other provisions, revised the definition of “firearm” under the GCA to include parts kits that can be readily converted into a fully assembled firearm, and expanded the definition of “frame or receiver” to include a partially complete, disassembled, or nonfunctional frame or receiver – including a frame or receiver parts kit – that is designed to or may readily be turned into a functioning frame or receiver. The rule also required FFLs that have, or take into inventory, any PMFs (including kit-built firearms and 3D printed firearms), to serialize the firearms.[16] However, it should be noted that the rule does not restrict a person’s ability to make a PMF if they are otherwise eligible to purchase and possess firearms, and does not prevent an unlicensed person from selling a PMF without a background check.[17] Critically, Final Rule 2021R-05F was recently upheld as consistent with the GCA by the United States Supreme Court in Bondi v. VanDerStok (2025) 604 U.S. 458.
In order to address California’s ghost gun epidemic, the Legislature passed AB 1621 (Gipson) Chapter 76, Statutes of 2022, which enacted a host of reforms related to the regulation of firearm “precursor parts,” which, as mentioned above, are components that may be readily convertible into usable firearms, as well as to the manufacture and assembly of firearms. Generally, AB 1621 rendered the sale, transfer and manufacture of both completed and unfinished frames and receivers subject to the same rules as fully assembled firearms, meaning that they generally must be sold by or through a licensed firearm dealer.[18] AB 1621 also enacted a prohibition against the knowing possession of any firearm that does not have a valid state or federal serial number or mark of identification.[19] Further, AB 1621 prohibited the sale or transfer of manufactured or assembled firearms by entities that are not federally licensed and prohibited any person or entity from knowingly manufacturing or assembly, or aiding and abetting the manufacture or assembly of a firearm that is not properly serialized.[20] The measure also established several provisions of law limiting the acquisition, possession, purchase and use of CNC milling machines that have the sole or primary function of manufacturing firearms by any entity except for a state licensed firearms manufacturer or importer.[21] In 2023, AB 1089 (Gipson), Chapter 243, Statutes of 2023, extended the manufacturing and assembly limitations enacted by AB 1621 to three-dimensional printers.[22]
Last year, the Legislature passed AB 1263 (Gipson), Chapter 636, Statutes of 2025, which, among other things, made it unlawful to knowingly or willfully cause another person to engage in the unlawful manufacture of firearms, and to knowingly or willfully aid, abet, promote or facilitate the unlawful manufacture of firearms. To effectuate this prohibition, the bill specified various conduct prohibited under existing law that constitutes the definition of the “unlawful manufacture of firearms,” such as the manufacture of firearms by a minor, the manufacture of four or more firearms by an unlicensed party, the manufacture of any firearm using a 3D printer or CNC milling machine, and the manufacture of any number of prohibited weapons and firearm devices.[23]
- Effect of This Bill
This bill seeks to address the sharp rise in 3D-printed ghost guns by establishing a rigorous regulatory framework applying to all 3D printers sold or leased in California which would require all such 3D printers to come factory-equipped with software that automatically detects and prevents the printing of firearms and illegal firearm components such as firearm precursor parts and machinegun conversion devices.[24] The bill achieves this via provisions that generally fall into two categories: 1) the development and publication by DOJ of “performance standards” for both 3D printer firearm blueprint detection algorithms and software controls processes, and 2) the creation of a list by DOJ of all makes and models of 3D printers whose manufacturers have submitted documentation to DOJ attesting that they have installed so-called “firearm blocking technology,” as required by the bill.[25] The bill prohibits the sale or transfer of any 3D printer in California that does not have such technology installed and does not appear on the DOJ’s list of approved printers (both requirements must be satisfied), a violation of which can be enforced civilly by a person who has suffered harm as a result of a violation or the Attorney General, a county counsel or city attorney. However, the bill includes exemptions for printers sold to a state-licensed firearm manufacturer, to law enforcement agencies, to aerospace, biomedical, engineering and other industries for commercial uses, for certain entertainment and propmaking uses, and for those purchased prior to the effective date of the prohibition. Of particular relevance to this Committee, the bill includes a misdemeanor criminal penalty for disabling firearm blocking technology or transferring a 3D printer that has been modified, which will be discussed in greater detail below.
This is a complex measure that includes a multitude of highly technical requirements, most of which must be met by DOJ on a very aggressive timeline. Many of the bill’s provisions raise questions that the author and Committee may wish to consider. Chiefly, 3D-printing advocates argue that this bill threatens innovation in the field of 3D printing, as well as the free expression and privacy rights of users, by criminalizing “open-source” technology and burdening consumer choice with a burdensome bureaucratic process.[26] Committee staff were unable to identify any examples of so-called “performance standards” for firearm blueprint detection algorithms or software controls processes, but as with any new technology, despite the granularity and accuracy with which such software is able to discern prohibited vs. permissible print jobs, the Committee should be cognizant that there will likely be some number of both false positives (i.e. preventing a job that is not intended to produce a firearm or firearm parts) and false negatives (allowing a job that produces a firearm or firearm part).
Additionally, regarding the performance standards required to be published by DOJ, the bill permits DOJ to adopt any set of performance standards created by a non-governmental entity, including ASTM International.[27] DOJ must publish these standards by September 1, 2028, roughly 1 year after the bill is signed by the Governor, should it be. However, it is unclear whether DOJ possesses the technical capacity to develop and publish such standards internally, or even determine whether those developed by ASTM International, for instance, comply with the requirements of the bill. Moreover, information provided to Committee staff indicates that ASTM International will not publish the relevant standards until a few months prior to the September 2028 deadline, leaving DOJ even less time to make this determination. Accordingly, the author and Committee may wish to extend this implementation timeline to ensure that DOJ has adequate time to publish thorough and accurate performance standards.
As mentioned previously, the bill includes misdemeanor penalties for what appear to be two distinct crimes. The conduct described is set forth in a single provision, but the author and Committee may wish to amend the bill to separate it into different provisions that each apply to one course of conduct (per the italicized and bolded text below):
It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justice’s list of three-dimensional printers eligible for sale in California […] with the intent to facilitate the unlawful manufacture of firearms […]
This criminal provision also raises certain questions that the Committee should consider, such as what conduct is intended to be included in the term “circumvent” in the provision above. Would any modification of a 3D printer qualify as “circumvention” of firearm blocking technology? Given, it is unlikely that this provision could inadvertently sweep up hobbyists, innovators and other non-criminal users given the requirement of a specific intent to manufacture firearms. Additionally, the latter portion of this penalty appears to apply to any modified 3D printer, not just printers that have had their firearm blocking technology circumvented, though again, given the intent requirement, the breadth of such application is unlikely to sweep up users who modify a printer for non-criminal purposes.
- Double Referral
This bill passed out of the Senate Judiciary Committee on June 23rd. For a more in-depth discussion of the bill’s provisions not within the jurisdiction of this Committee, see the analysis prepared by the Senate Judiciary Committee.
- Argument in Support
According to the California Police Chiefs Association:
AB 2047 addresses one of the fastest-growing threats to California's firearm regulatory framework: the increasing availability of three-dimensional printed firearms and firearm components that can be manufactured outside traditional regulatory channels. Advances in consumer-grade three-dimensional printing technology have made it easier than ever for individuals to manufacture unserialized firearms and firearm parts, often referred to as "ghost
guns," that are difficult to trace and frequently fall outside existing safeguards designed to prevent prohibited persons from obtaining weapons.
Law enforcement agencies throughout California continue to encounter illegally manufactured firearms in criminal investigations, gang activity, prohibited possessor cases, and violent crime incidents. The rapid evolution of three-dimensional printing technology has created new challenges for public safety, allowing individuals to produce firearm components using commercially available equipment that was not originally designed with these risks in mind. As technology evolves, California's public safety laws must evolve as well. AB 2047 takes a proactive approach by requiring manufacturers of three-dimensional printers sold in California to equip those printers with certified firearm blueprint detection and blocking technology designed to prevent the manufacture of firearms and illegal firearm parts. The bill directs the Department of Justice to establish performance standards, certify qualifying detection technologies, and create a compliance framework for manufacturers. By addressing the issue at the point of manufacture, the bill seeks to prevent unlawful firearm production before it occurs rather than relying solely on criminal enforcement after a weapon has already been produced and potentially used in a crime.
Importantly, AB 2047 does not prohibit lawful ownership or use of three-dimensional printers. Nor does it restrict the many legitimate educational, commercial, industrial, and creative applications of additive manufacturing technology. Instead, the bill establishes reasonable safeguards intended to reduce the ability of individuals to utilize these devices to manufacture firearms and firearm components unlawfully. The measure recognizes both the tremendous benefits of emerging technology and the need to address foreseeable public safety risks associated with its misuse. The bill also strengthens accountability by prohibiting the intentional circumvention, disabling, or modification of required firearm blocking technology when done for the purpose of manufacturing firearms. These provisions help ensure that the technological safeguards established by the bill remain effective and cannot be easily defeated by those seeking to evade California law. As California continues to confront the growing challenge posed by unserialized firearms and emerging methods of firearm manufacturing, AB 2047 represents a thoughtful and forward looking
response. By leveraging existing technology to prevent unlawful firearm production, the bill will help protect communities, support law enforcement investigations, and strengthen California's existing efforts to combat ghost guns and illegal firearm trafficking.
- Argument in Opposition
According to a coalition of technology and civil rights groups:
This approach is not only ineffective and easily bypassed, but it also has several harmful impacts on consumer choice, privacy, and free expression. Before speaking on our objections, we note that unlicensed firearm production and sale, including the production of “ghost guns,” is already illegal in California, as well as many other states. Therefore, the harms this bill wishes to address are already covered by existing law.
AB 2047 would require 3D printers to have a pre-approved algorithm that can “print block” a supposed firearm-related print job by comparing it to a pre-approved list of banned print jobs. While this may appear sound in theory, in practice it will be ineffective because the algorithms will be over- and underinclusive. They will be over-inclusive because these algorithms may mistake simple geometric shapes or innocuous film props and toys as firearm parts, thereby harming everyday creators. They will also be under-inclusive by the very nature of most 3D printers, which can be thought of as hot glue guns on a motion platform that follow basic instructions to build a model layer by layer. It takes very little skill for someone to tweak a model or the instructions so that they deviate enough from an existing model to evade detection by any print-blocking algorithms. Even if prints assumed to represent firearm parts are blocked, there are still a number of ways to use conventional means to physically reshape or combine printed pieces into firearm parts after printing. It would likewise take little skill to widely disseminate these new print designs, instructions, or methodologies. The same applies to bypassing the algorithms all together through device modifications or building DIY printers with commonly available components. In practice, then, this bill sets up a cat-and-mouse game for detection that defeats its very purpose.
On the other hand, what AB 2047 will demonstrably do is create a system in which every 3D print job is scanned to determine if it is acceptable, implicating the privacy of all 3D printer users while also laying the groundwork for future censorship. Due to the hardware limitations of 3D printers, this algorithmic scanning cannot be handled locally on-device. The only feasible way to compare a print job to an updated database of prohibited files would be to give manufacturers access to prints through cloud-based or cloud enabled first party software. That means that AB 2047 mandates the creation of a system in which every print job an individual runs, whether that be for a medical device or protest equipment, becomes susceptible to surveillance by the vendor of their 3D printer.
This mass surveillance is worrying on its own, but the harms don’t end there: Once the print-blocking infrastructure is in place, it can be broadened and abused. By expanding the use of this proprietary code, (and because altering this code is criminalized), vendors can lock consumers into predatory practices similar to what is seen with Digital Rights Management (DRM) technologies—which attempt to control what you can and can't do with the media and hardware you've purchased, and bar consumers from ever truly owning their devices. This framework allows governments and corporations alike to exercise granular control over 3D printing—potentially censoring socially or politically sensitive 3D-printed designs, or enabling abusive enforcement of patents and copyrights that does not account for defenses and legal safeguards like fair use.
-- END --
See 27 CFR § 479.102 ↑
Under Pen. Code, § 16532, “firearm precursor part” means “any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted.” ↑
“The Liberator – the world’s first 3d printed handgun.” https://www.vam.ac.uk/articles/the-liberator-the-worlds-first-3d-printed-handgun ↑
https://ghostgunner.net ↑
“Radical gun rights movement “3D2A” and 3D printers spark rapid rise in ghost guns, NYPD say.” CBS News. 9 December 2025. https://www.cbsnews.com/news/3d2a-group-3d-printers-spark-rapid-rise-in-ghost-guns-nypd-says/ ↑
DEFCAD boasts the “world’s largest open source repo for 3D2A files and small arms technical data, established by Defense Distributed in 2012.” https://defcad.com ; “Lawsuits, Rivalries, and Trolls: Examining the Behaviour of the 3D-Printed Gun Movement.” Global Network on Extremism and Technology. 10 September 2024. https://gnet-research.org/2024/09/10/lawsuits-rivalries-and-trolls-examining-the-behaviour-of-the-3d-printed-gun-movement/ ↑
Ibid. “Gun-control group Everytown settles with 'ghost gun' sites over logo.” Reuters. 3 March 2023. https://www.reuters.com/legal/litigation/gun-control-group-everytown-settles-with-ghost-gun-sites-over-logo-2023-03-03/ ↑
“California’s Fight Against The Ghost Gun Crisis: Progress and New Challenges.” California Department of Justice Office of Gun Violence Prevention. October 2024, at p. 4. https://oag.ca.gov/system/files/media/ogvp-report-ghost-guns.pdf A “crime gun” is a firearm that was recovered by a law enforcement agency after it was (1) used in a crime, (2) suspected to have been used in a crime, or (3) illegally possessed. ↑
Ibid. ↑
Ibid, at pp. 5-6. ↑
“Santa Rosa police seize over 165 firearms, arrest suspected ghost gun manufacturer.” CBS News. 11 February 2026. https://www.cbsnews.com/sanfrancisco/news/santa-rosa-167-guns-seized-cloverdale-suspected-ghost-gun-manufacturer-arrested/ ; “3D-Printed Firearm Recovered After Man with a Gun Call in Lucerne Valley, Two Men Arrested.” Victor Valley News Group. 17 February 2026. https://www.vvng.com/3d-printed-firearm-recovered-after-man-with-a-gun-call-in-lucerne-valley-two-men-arrested/ ; “DA task force seizes ghost gun arsenal from San Jose teen.” Santa Clara County District Attorneys Office. 26 February 2026. https://da.santaclaracounty.gov/da-task-force-seizes-ghost-gun-arsenal-san-jose-teen ↑
18 U.S.C. § 922, subd. (t). ↑
For more information on NICS, see: https://www.fbi.gov/how-we-can-help-you/more-fbi-services-and-information/nics ↑
18 U.S.C. §923, subd. (i). ↑
18 U.S.C. § 921, subd. (a)(3). ↑
The rule is codified at 27 CFR, Parts 447, 478, and 479. ↑
“Ghost Guns.” Giffords Law Center to Prevent Gun Violence.https://giffords.org/lawcenter/gun-laws/policy-areas/hardware-ammunition/ghost-guns/#footnote_23_565; Though not critical to the analysis of this bill, it should be noted that Final Rule 2021R-05F was recently upheld by the Supreme Court in Bondi v. VanDerStok (2025) 604 U.S. ___, a ruling handed down just last month. ↑
Pen. Code, § 30400. ↑
Pen. Code, § 23920(b). A similar prohibition is operative in existing law in PC § 23920(a). ↑
Pen. Code, § 29180(d), (f). ↑
Pen. Code, § 29185. ↑
Ibid. ↑
Pen. Code, § 29186. ↑
Pursuant to Pen. Code, § 17015, a “pistol converter” is any device or instrument that when installed in or attached to the rear of the slide of a semiautomatic pistol, replaces the backplate, and interferes with the trigger mechanism and thereby enables the pistol to shoot automatically more than one shot by a single function of the trigger, and includes a device manufactured using a 3D printer. ↑
The bill defines “firearm blocking technology,” as hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts. ↑
“The Dangers of California’s Legislation to Censor 3D Printing.” Electronic Frontier Foundation. 13 April 2026. https://www.eff.org/deeplinks/2026/04/dangers-californias-legislation-censor-3d-printing. ↑
ASTM International is a standards organization that develops and publishes consensus technical international standards for a wide range of materials, products, systems and services, and additionally operates several global initiatives advancing additive manufacturing. See https://www.astm.org/about ↑
Senator Thomas Umberg, Chair
2025-2026 Regular Session
Bill No: AB 2047 (Author:Bauer-Kahan)
Version: June 15, 2026
Hearing Date: June 23, 2026
Fiscal: Yes
Urgency: No
Consultant: ID
SUBJECT
Firearms: 3-dimensional printing blocking technology
DIGEST
This bill makes it unlawful to sell or transfer a three-dimensional (3-D) printer in California that is not equipped with firearm blocking technology or not listed on the Department of Justice’s (DOJ) list of 3-D printers for which the manufacturer has submitted a complete attestation that the printer is equipped with firearm blocking technology; requires the DOJ to publish guidance on performance standards for firearm blueprint detection algorithms and software control processes for 3-D printers; requires the DOJ to publish a list of 3-D printers for which the manufacturers have not submitted a required attestation that the printer is equipped with firearm blocking technology; and provides a cause of action for a violation of these provisions, as specified.
EXECUTIVE SUMMARY
3-D printers use an additive manufacturing process that lays down consecutive layers of material to generate various three-dimensional products. 3-D printers have grown significantly in popularity in recent years, and designs for guns built through 3-D printers have consequently also become widely available online. As the prevalence of 3-D printed guns have grown, the state has enacted various laws to prohibit the manufacture of 3-D printed guns without a gun manufacturing license. AB 2047 aims to prevent 3-D printers from being capable of unlawfully printing firearms, by requiring 3-D printer manufacturers to equip the 3-D printers they sell or transfer with firearm blocking technology. To accomplish this, it requires the DOJ to publish guidance for 3-D printer manufacturers specified performance standards for firearm blocking technology for 3-D printers, and requires manufacturers of 3-D printers to provide the DOJ with an attestation that the 3-D printers they sell are equipped with firearm blocking technology. The DOJ must then publish a list of the makes and models of 3-D printers for which it has received a complete attestation, and of those for which it has received an incomplete attestation. AB 2047 provides a cause of action against a person who sells, offers to sell, or transfers a 3-D printer in California that is not equipped with a firearm blocking technology, and against a person who knowingly files an attestation containing false information, and permits a person harmed as a result of a violation, the Attorney General, county counsel, or a city attorney to file such a cause of action. Lastly, AB 2047 makes it a misdemeanor to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3-D printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer in California a modified 3-D printer, as specified.
AB 2047 is sponsored by Everytown for Gun Safety, and is supported by a diverse coalition of groups and nonprofits. It is opposed by the California Rifle and Pistol Association, a number of other organizations, and several individuals. Should it pass this Committee, AB 2047 will then be referred to the Senate Public Safety Committee.
PROPOSED CHANGES TO THE LAW
Existing law:
- Establishes the Firearm Industry Responsibility Act (FIRA) to prohibit firearm industry members from dealing in abnormally dangerous firearm-related products. Requires a firearm industry member to comply with the firearm industry standard of conduct, and makes it a violation of the firearm industry standard of conduct for a firearm industry member to fail to comply with specified provisions, including establishing, implementing, and enforcing reasonable controls. (Civ. Code, §§ 3273.50 et seq.)
- Specifies that a firearm-related product includes a “firearm manufacturing machine,” and defines, for the purposes of FIRA, “firearm manufacturing machine” to mean a three-dimensional printer, as defined, a computer numerical control (CNC) milling machine, or a similar machine, that is marketed or sold, or is reasonably designed or intended to be used, to manufacture or produce firearms, firearm components, or firearm accessories. (Civ. Code § 32783.50(d).)
- Authorizes a person who has suffered harm because of a firearm industry member’s conduct, the Attorney General, a city attorney, and a county counsel to bring an action in court under FIRA for a violation of the firearm industry standard of conduct. (Civ. Code § 3273.52.)
- Permits a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means, including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, a member of the Armed Forces, or any law enforcement agency or forensic laboratory, as specified, or who commits specified criminal acts related to firearms. (Civ. Code § 3273.61.)
- Prohibits a person from selling, offering to sell, transferring, advertising, or marketing a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in the state to engage in conduct prohibited by Penal Code section 29185, or in a manner that otherwise knowingly or recklessly aids, abets, promotes, or facilitates conduct prohibited by that section.
- Creates a rebuttable presumption that a person is engaged in this prohibited conduct if they offer to sell, advertise, or market a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s ability to manufacture firearms, and the person sells or transfers the CNC milling machine or three-dimensional printer without verifying that the purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited, as specified. (Civ. Code § 3273.62.)
- Makes it unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civ. Code § 3273.625.)
- Defines “firearm” to mean a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion. (Pen. Code § 16520.)
This bill:
- Establishes the “California Firearm Printing Prevention Act,” and defines for the Act the following:
- “Department” to mean the Department of Justice;
- “firearm” to mean the definition of firearm in Penal Code section 16520;
- “firearm blocking technology” to mean hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts;
- “firearm blueprint detection algorithm” to mean a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flags any such files to prevent their use to manufacture a firearm or illegal firearm parts;
- “firearm precursor part” to have the same meaning as it is defined in Penal Code section 16531;
- “firmware design” to mean integration of a firearms blueprint detection algorithm directly into a three-dimensional printer’s firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts;
- “illegal firearm parts” to mean a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor;
- “integrated pre-print software design” to mean a limitation of a three-dimensional printer’s operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer’s proprietary software, and integration of a firearm blueprint detection algorithm into that pre-print software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts;
- “Pistol convertor” to have the same meaning as it is defined in Penal Code section 17015;
- “Software controls process” to mean a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearm blueprint detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts; and
- “Three-dimensional printer” to have the same meaning as defined in Civil Code section 3273.60.
- Requires, on or before September 1, 2028, the DOJ to publish written guidance on performance standards for firearm blueprint detection algorithms and for software controls processes for three-dimensional printer manufacturer use, as specified, and permits the DOJ to adopt some or all of any set of performance standards created by a nongovernmental entity, including an academic consortium or a global standard-setting nonprofit, including ASTM International, and specifies that, to the extent performance standards created by a nongovernmental entity meet all the requirements of the bill’s provisions, the DOJ’s performance standards may provide that compliance with the nongovernmental entity’s standards shall constitute compliance. Permits the DOJ to seek input from relevant stakeholders and technical experts, as specified.
- Specifies that the performance standards must require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code;
- Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts; and
- Flag any disallowed files for print rejection by a software control process.
- Specifies that the performance standards must require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize information from an inventory of disallowed firearm blueprint files that have been commonly shared on internet forums to detect those files and modified versions of those files, and, in order to meet these requirements, permits the standards to require blueprint detection algorithms to receive updated information from an inventory of firearm blueprint files and illegal firearm parts blueprint files, including but not limited to, a library maintained by any state agency or out-of-state agency, academic institution, or nongovernmental entity. Specifies that an individual authorized to access such a file library for developing or vetting firearm blocking technology is immune from liability under the FIRA.
- Requires the performance standards to include standards for acceptable false-positive and false-negative rates in detection algorithm performance, but prohibits the standards from requiring that a firearm blueprint detection algorithm produce a false-negative rate of zero corresponding to a perfect success rate at detecting disallowed files, as specified.
- Specifies that the performance standards must require that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and frequency that reasonably considers the rate of innovation for the design and availability of new firearm blueprint files, as specified, and requires the performance standards to include a process for periodically reviewing emerging detection software techniques, including advanced forms of image recognition and volumetric search functionality.
- Specifies that the performance standards must require software control processes have the capacity, to a high degree of reliability, to substantially reduce the likelihood of foreseeable circumvention attempts intended to evade a firearms blueprint detection algorithm, and requires the performance standards to include minimum standards on developer testing to confirm an acceptably low level of evasion with identified design files for firearms and illegal firearm parts, but prohibits the standards from requiring that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Requires the performance standards to set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including that the standards-setting process shall consider: firmware design; integrated pre-print software design; and any other form, including handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the software controls process meets all performance requirements of the standard and is at least as effective and resistant to being defeated as the above-listed design forms.
- Requires the design standards to include: for firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing; and for integrated pre-print software design, guidance for how vendors must demonstrate that printers will accept print jobs exclusively through authorized and validated software systems, as specified.
- Prohibits, on or before March 1, 2029, any business that produces or manufactures three-dimensional printers for sale or transfer in California to submit to the DOJ an attestation, for each make and model of printer they intend to sell in California, that the manufacturer has equipped the printer with a firearm blueprint detection algorithm and a software controls process, and which confirms that the manufacturer tested and confirmed the functionality of the firearm blocking technology.
- Provides the Attorney General with the authority to investigate and inspect the submission and the models if the attestation is incomplete or contains information that indicates that the make and model may not be effectively equipped with firearm blocking technology.
- Permits a self-attestation form to include instructions to manufacturers on how to test the functionality of firearm blocking technology, how to affirm that testing has occurred on a specified percentage of printers, and how to submit the self-attestation form.
- Requires the DOJ, on or before June 1, 2029, to publish a list of the makes and models of three-dimensional printers that have complete attestations, and of any makes and models that have an incomplete attestation. Requires this list to be updated no less frequently than on a quarterly basis and be made accessible on the DOJ’s website, and requires the retailers and distributors of three-dimensional printers to consult the list to ensure their inventory consists of compliant three-dimensional printers.
- Requires a business that produces or manufactures three-dimensional printers to, before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California:
- equip the printer with firearm blocking technology;
- submit a self-attestation of installation of the firearm blocking technology to the DOJ.
- Specifies that any business that sells, offers to sell, distributes, or transfers a three-dimensional printer in California must consult the DOJ’s list. Makes it unlawful to sell or transfer a three-dimensional printer in California that is not equipped with a firearm blocking technology and is not listed on the DOJ’s list.
- Does not apply the requirements described in 12) through 13), above, to:
- Printers manufactured for and sold exclusively to the state or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes;
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors, if not also sold on the consumer retail market;
- Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios; or
- Printers sold or transferred in private transactions that were originally purchased before the publication of the DOJ’s list.
- Permits a civil action against a person who sells, offers to sell, or transfers a three-dimensional printer in California that is not equipped with firearm blocking technology, and against a person who knowingly files an attestation containing false information. For a civil action for selling a printer without firearm blocking technology, it is an affirmative defense against a retailer, distributor, wholesaler, importer, or other transferor that they only sold or transferred the three-dimensional printer after verifying that that it was on the DOJ’s list as having a complete attestation.
- Permits a person who suffers harm in California as a result of a violation of these provisions to bring a civil action pursuant to 15), above, and permits such a person to seek compensatory damages as well as injunctive relief. Additionally permits the Attorney General, county counsel, or a city attorney to bring an action for a violation of these provisions, and permits them to seek a civil penalty of no more than $25,000 for each violation as well as injunctive relief. Specifies that a prevailing plaintiff is entitled to recover reasonable attorney’s fees and costs.
- Makes the provisions described in 12) through 16), above, operative on December 1, 2029.
- Permits the DOJ to promulgate regulations and develop forms and publications to implement the requirements of this bill.
- Makes it unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer in California one or more modified versions of a three-dimensional printer identified on the DOJ’s list, with the intent to facilitate the unlawful manufacture of firearms, and makes a violation of this provision a misdemeanor. Specifies that this does not preclude prosecution under any other law providing for a greater penalty.
COMMENTS
- Author’s statement
In support of AB 2047, the author states:
California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child.
As technology evolves, it’s important that consumer protections change with it to ensure the safety of our communities.
- The epidemic of gun violence in the U.S.
For many years now, gun violence and mass shootings have been a major issue in the United States, and gun violence has surged in recent years. The United States saw a record number of mass shootings in 2023, with the Gun Violence Archive reporting 659 mass shootings, and 503 in 2024.[1] Moreover, there were 44,447 gun deaths in the United States in 2024, which is the highest rate of recent years with complete data.[2] So far in 2026, there have been 5,599 gun homicides, and 180 mass shootings.[3]
Part of this overwhelming epidemic of gun violence is the ubiquitous prevalence of firearms in the United States. Some estimates place the current number of firearms in civilian possession in the United States at 433.9 million, and both possession and production have been growing in recent years.[4] In 2019 and 2020, 40 million guns were sold in the United States.
- “Ghost guns” and 3-D printed guns are a new threat
Historically, firearms have been produced by licensed manufacturers in factories and sold through licensed gun dealers. Federal law requires all guns manufactured in the United States and imported from abroad to have serial numbers, typically displayed on the back of the frame. Serial numbers and extensive regulations on manufacturers help ensure firearms can be traceable, and are only sold to those legally able to possess them. Thus, those intending to avoid the licensing of firearms or to evade firearms being traced back to the owner have historically attempted to file off the serial number from a firearm’s frame.
However, “ghost guns” have provided an incredibly easy avenue for such individuals to evade firearm licensing and other regulations. Such “ghost guns” can be manufactured by an unlicensed buyer with parts that can be acquired without a background check or manufacturing license. Because of this, ghost guns are also unserialized and therefore untraceable by law enforcement.
One way in which “ghost guns” are produced is through computer numerical control (CNC) milling machines. CNC milling machines are machines capable of automatically processing raw materials such as metal, plastic, wood or composite into digitally modeled shapes based solely on programed instructions, without the need for a human operator. CNC milling machines use subtractive manufacturing: essentially breaking down a raw material until the desired product is created.
3-D printers, by contrast, use an additive manufacturing process that lays down consecutive layers of material to generate various products. Typically, someone uses a 3-D printer by providing a 3-D model (usually in CAD (Computer-Aided Design) format) to a particular software program that “slices” the model into horizontal layers that it then converts into code for the printer to read. When the printer receives this code for the printing job, its own firmware processes that code to instruct the printer to print the horizontal layers of the design with the raw processing material. 3-D printers have grown significantly in popularity in recent years, with the designs for guns built through 3-D printers becoming widely available online.
There has been an explosion in the use and proliferation of such ghost guns. In Los Angeles alone, the LAPD recovered 1,921 ghost guns in 2021, more than double the amount recovered in 2020.[5] Since 2017, the department has seen a 400% increase in ghost gun seizures. In 2022, in Sacramento, a man used an unregistered homemade automatic rifle to kill his three daughters, a chaperone, and himself in a local church.[6] Just this year, a San Jose teenager was found with two 3-D weapons printers and 27 3-D printed guns.[7] Data suggests that there has been an almost 1,000% increase in recoveries of 3-D printed guns at crime scenes in major cities over the past five years.[8]
- California has tried to regulate ghost guns and 3-D printers
In 2022, the state passed AB 1621 (Gipson, Ch. 76, Stats. 2022) to take major steps to rein in ghost gun manufacturers and CNC milling machines and 3-D printers used to manufacture ghost guns by establishing various restrictions on the possession, sale, transfer, import, manufacture, and assembly of serialized and unserialized firearms, and firearm precursor parts, subject to exceptions. A year later, AB 1089 (Gipson, Ch. 243, Stats. 2023) amended these laws to include 3-D printers and CNC milling machines, and created two new causes of action against persons who knowingly distribute a digital firearm manufacturing code or commit an act that violates the Penal Code on unlawfully using or selling CNC milling machines and 3-D printers. These provisions were further expanded last year by AB 1263 (Gipson, Ch. 636, Stats. 2025).
- AB 2047 would require the creation of guidelines regarding firearm blocking technology for 3-D printers, and the use of such technology in 3-D printers
AB 2047 attempts to address 3-D printed guns at the source in three main ways. First, it requires a regulatory process in which the DOJ must publish by September 1, 2028, guidance on performance standards for firearm blueprint detection algorithms and software controls processes for 3-D printers. This guidance and the performance standards would need to meet certain requirements and include specified information, but can be adopted from any standards created by another entity or standards-setting nonprofit like ASTM International. AB 2047 would encourage the DOJ to engage relevant stakeholder input.
Second, AB 2047 would, beginning December 1, 2029, prohibit the sale or transfer of 3-D printers not equipped with firearm blocking technology and not listed on a DOJ list of manufacturers in compliance. For this second provision, AB 2047 requires manufacturers of 3-D printers for sale or transfer to California to submit to the DOJ an attestation that the manufacturer equipped the printer with a firearm blueprint detection algorithm, and requires the DOJ to compile and publish a list of the makes and models of 3-D printers whose manufacturers submitted this required attestation.
If a person sells, offers to sell, or transfers a 3-D printer without firearm blocking technology, or knowingly files an attestation containing false information, AB 2047 permits a person who suffered harm in California due to that violation to bring a civil action for compensatory damages and injunctive relief. The Attorney General, a county counsel, or a city attorney also may bring an action for a violation, for which the Attorney General may seek a civil penalty of $25,000 per violation. A prevailing plaintiff would be entitled to reasonable attorney’s fees and costs. However, AB 2047 provides an affirmative defense for a seller who verified that the 3-D printer was on the DOJ’s list of 3-D printers with attestations that they contain firearm blocking technology.
In addition, AB 2047 provides some narrow exceptions to its requirement that 3-D printers have firearm blocking technology. Those include printers sold to: state-licensed firearms manufacturers; state or law enforcement agencies; and aerospace, automotive, or chemical or mechanical engineering companies or government contractors; as well as those manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
- AB 2047 makes tampering with or disabling firearm blocking technology a crime
AB 2047 makes it a crime to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed on a 3-D printer with intent to manufacture firearms, or to knowingly distribute, sell, or transfer in California a modified 3-D printer with the intent to facilitate the unlawful manufacture of firearms. These provisions are outside the scope of this Committee’s jurisdiction, but will be addressed in the Senate Public Safety Committee should the bill pass out of this Committee.
- Second Amendment considerations
The Second Amendment to the United States Constitution states that “a well-regulated militia, being necessary to the security of a free State, the right of the people to keep and bear arms, shall not be infringed.” (U.S. Const., Amend. II.) For 217 years after the Second Amendment’s ratification, United States Supreme Court jurisprudence did not provide an individual right to possess a firearm. However, that changed in 2008 when the Supreme Court ruled in D.C. v. Heller that a District of Columbia law banning the possession of handguns violated the Second Amendment. (District of Columbia v. Heller, 554 U.S. 570 (2008).) Two years later, the Supreme Court reaffirmed, again along ideological lines, that the Second Amendment protected the right to keep and bear arms for the purpose of self-defense, and further held that the Second Amendment was fully applicable to the states. (McDonald v. City of Chicago, 561 U.S. 742 (2010).)
In D.C. v. Heller, the Supreme Court devised a two-step analysis. The analysis required that first it must be determined whether the law at issue regulates activity that falls within the scope of the Second Amendment right as originally understood, and if so, then the court is to determine how close the law comes to the core of the Second Amendment right, and the severity of the law’s burden on that right. However, the Court also stated in Heller that its opinion should “not be taken to cast doubt on longstanding prohibitions on the possession of firearms by felons and the mentally ill, or laws forbidding the carrying of firearms in sensitive places such as schools and government buildings, or laws imposing conditions and qualifications on the commercial sale of arms.” (Heller, 554 U.S. at 626.) The Court further notes in a footnote that these “presumptively lawful regulatory measures” are examples and not meant to be exhaustive. (Id., at 626, n. 26.) Under this precedent, the Tenth Circuit Court of Appeal determined that the National Firearms Act’s requirements that firearms dealers and manufacturers register and pay taxes annually was constitutional under this category of “presumptively lawful regulatory measures.” (U.S. v. Cox, 906 F.3d 1170 (10th Cir. 2018).)
The Supreme Court revisited its Second Amendment jurisprudence in the case New York State Rifle & Pistol Association v. Bruen. In that case, the Court determined that the two-step analysis it had previously outlined in Heller was “one step too many.” (N.Y. State Rifle & Pistol Ass’n v. Bruen, 142 U.S. 2111 (2022).) Instead, the Court created a new standard: if the Second Amendment’s plain text covers the individual’s conduct, it is presumptively protected, and the government must demonstrate that the regulation is consistent with the nation’s historical tradition of firearm regulation. (N.Y. State Rifle & Pistol Ass’n, 142 U.S. at 2126.)
The Court’s assertions in Heller that its decisions should not cast doubt on the legality of conditions and qualifications on the commercial sale of arms was not disturbed by the Court’s New York State Rifle & Pistol Association decision. That case does not mention regulations on the sale of arms at all. Thus, as a threshold matter, the restrictions set by AB 2047 on manufacturers and sellers of 3-D printers relate solely to the commercial sale and production of machines that can manufacture firearms, and the Supreme Court’s jurisprudence casts little doubt on whether AB 2047 provisions violate the Second Amendment. Its provisions are analogous to the provisions of the National Firearms Act that were upheld as constitutional under U.S. v. Cox. Moreover, unlike the laws at issue in Heller or New York State Rifle & Pistol Association, the laws created by AB 2047 deal with the machines that can be used to manufacture firearms, and not specifically with firearms themselves.
- First Amendment questions
The First Amendment of the United States Constitution protects an individual’s freedom of speech, as well as freedom from compelled speech. Under the First Amendment, any restriction on speech that is based on the content of the speech is presumptively unconstitutional and subject to strict scrutiny. (Reed v. Town of Gilbert (2015), 576 U.S. 155, 163.) However, when the speech involved is commercial speech, in that it solely relates to the economic interests of the speaker and its audience, it is less protected than other forms of speech. (Central Hudson Gas & Elec. Corp. v. Public Svc. Comm’n of N.Y. (1980) 447 U.S. 557, 562.) Limitations on commercial speech is generally upheld if the law advances a substantial government interest and directly advances that interest.
Because this bill requires 3-D printers to have specific software, it may implicate the first amendment as compelled speech. The question of whether computer code should be considered speech for the purposes of the First Amendment has been debated by the courts over the last few decades. The issue was examined by an en banc panel of the Ninth Circuit in Bernstein v. United States Dept. of Justice in 1999, by the Sixth Circuit in Junger v. Daley in 2000, and by the Second Circuit in Universal City Studios, Inc. v. Corley in 2001. While all three cases acknowledged that code can be free speech, the courts varied in their approaches and determination of when code is considered speech and when it may not be.
In the Ninth Circuit, the court recognized a distinction between source code and object code, in which source code is the text of a program written in a programming language and object code is the code in a machine language read by computers, finding that source code is expressive content, while object code is not. (Bernstein v. U.S. Dept. of Justice (1999) 176 F.3d 1132, reh’g granted, opinion withdrawn.) The Sixth Circuit went beyond the Ninth Circuit’s reasoning, finding that source code is protected by the First Amendment, while the Second Circuit evaluated whether the code was used to communicate to the computer, or to the user of the program. (Junger v. Daley (2000) 209 F.3d 481, Universal City Studios, Inc. v. Corley (2001) 273 F.3d 429.)
More recently, the Third Circuit looked at this question in a more relevant context. Plaintiffs in that case challenged New Jersey’s law that prohibited the distribution of 3-D printer files for the printing of a firearm, alleging it violated the plaintiff’s First Amendment rights to distribute 3-D printer files for firearms. (Def. Distributed v. Atty. Gen. of N.J. (2026) 167 F.4th 65.) The Court there determined that, while computer code can be covered by the First Amendment, it is inherently functional, and thus a plaintiff must show that the code involves an expressive purpose or communication of ideas to be protected. (Id. at 82.) A U.S. District Court in Florida recently ruled on California’s law prohibiting the selling or transfer of a CNC milling machine or 3-D printer relying on the Third Circuit’s reasoning, finding that there was not enough evidence to show that the defendant’s digital firearm manufacturing code was expressive content covered by the First Amendment. (CTRLPew LLC v. Chiu 2026 U.S. Dist. LEXIS 40455.)
Under these cases, it is unclear whether AB 2047’s requirement that 3-D printers contain firearm blocking technologies would be considered speech for First Amendment protection. The algorithms used in such technology are arguably functional, as its purpose is to direct the printer on what to or not to print. Furthermore, the code a user inputs into slicer software is to communicate with the printer, giving it directions to print. Moreover, the prohibited act by the blocking technology is the printing of a firearm that would already be illegal under California law. Yet the caselaw does make it clear that there is still uncertainty regarding how courts will treat code in the context of the First Amendment. Moreover, there are some overarching questions relating to free speech presented by this bill, given the scope of its limitation on 3-D printers. While manufacturing firearms without a manufacturer’s license is already illegal in California, placing a limiting device on machines that can manufacture more than firearms is a new step. The state certainly has a valid and substantial policy interest in preventing the illegal production of 3-D-printed firearms; what more could the state do to prevent 3-D printers from being able to print firearms via blocking technology?
- Arguments in support
According to Everytown for Gun Safety, the sponsor of this bill:
The 3D printed gun crisis is not a faraway or abstract problem. It’s happening here in California, right now. And at the rate it’s increasing, this crisis will get much worse if we don’t use every tool we have. In just the six month span between September 2025 - February 2026, numerous instances of 3-D printed firearm manufacturing were uncovered by law enforcement agencies all around California. These incidents often include teenagers too young to legally purchase the types of firearms they are printing at home.
- In September 2025, Yuba County Sheriffs uncovered a “fully operational 3D-printing workshop” run by three men aged 19-38 and seized 8 handguns, several 3-D printed handgun frames, four assault weapons, one rifle, and assorted firearms parts.
- In October 2025, the Santa Clara County DA’s Gun Violence Task Force arrested a man who was on probation for domestic violence running a ghost gun manufacturing operation out of his apartment. The press release paints an alarming picture: “When task force members entered the prohibited person’s home, they found the 3D gun printer still working inside a closet, two loaded weapons, three nearly finished weapons, and 35 machine gun conversion devices. All of the weapons were considered “ghost guns” – made and sold with no serial number to avoid tracing and detection.”
- In November 2025, Santa Rosa Police detectives found an 18-year-old running a ghost gun manufacturing operation in his apartment, less than two years after arresting a 14-year-old illegally manufacturing a ghost gun with a 3-D printer.
- In February 2026, 3D-printed firearms were recovered in at least four more newsworthy incidents, spread around the state:
- Law enforcement in Santa Rosa seized over 165 guns and three 3D printers from a 22-year-old ghost guns manufacturer.18
- Victor Valley sheriffs found a 3D-printed assault rifle, over 130 Polymer80 jigs, 3D printer materials and a 3D printing guide for different firearms in a Lucerne Valley ghost guns arrest involving a man who was previously indicted and pled guilty for manufacturing guns for a gun trafficker.19
- A San Jose teenager was arrested with 27 finished or near-finished 3D-printed firearms, including DIY machine guns, and two 3D printers near his sneaker collection in his bedroom.
- A Daly City narcotics and identity theft investigation led to uncovering a San Francisco residence with several 3D-printed firearms, rifle components, and a 3D printer. […]
3D-printing firearms is the next wave of the ghost guns crisis, a problem California has been battling for years. The threat is evolving and our policy solutions need to evolve too. AB 2047 gives us a chance to get a step ahead of the criminals running underground ghost gun selling operations and the teenagers tempted to use a home 3-D printer in their bedroom or basement to print a deadly weapon. […]
While California’s recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without an intervention at the manufacturing stage. And there’s good news on this front: the technology already exists to equip printers to identify and block these dangerous firearm print jobs. AB 2047 will simply ensure that printer manufacturers actually deploy these technological solutions and stop the spread of DIY firearms before it accelerates any further.
Specifically, AB 2047 creates a new requirement that 3D printers sold in California must be equipped with firearm printing blocking technology by March 2029. The law will primarily be enforced through civil mechanisms similar to the existing Firearm Industry Responsibility Act (Civil Code section 3273.50 et seq.) and existing laws allowing for civil actions to enjoin Unlawful Firearm Manufacturing (Civil Code section 3273.60). The bill sets out a staged implementation process to evaluate and certify the underlying components of firearm printing blocking technology before imposing any kind of requirement on 3D printer manufacturers.
- Arguments in opposition
According to the California Rifle & Pistol Association, which opposes AB 2047:
While framed as preventing unlawful manufacturing, this bill represents a costly, impractical, and constitutionally problematic burden on innovation, small businesses, and lawful hobbyists.
Key concerns:
- Technological Impracticality and Ineffectiveness: Detection algorithms and software controls can be evaded by technically skilled individuals through modifications, open-source alternatives, or altered files. Criminals will simply ignore the mandates or obtain printers out-of-state, while law-abiding makers and innovators face unnecessary barriers.
- Burdensome Regulation and Costs: Mandatory certification, attestations, testing, and quarterly DOJ lists will drive up prices for 3D printers, harm small businesses and California’s emerging tech sector, and stifle hobbyist innovation in areas far beyond firearms (prototyping, education, manufacturing).
- Constitutional Issues: The bill imposes prior restraints and technological mandates on tools that have substantial lawful uses, raising serious Second Amendment concerns under Bruen and due process issues. It effectively creates a de facto ban on non-compliant printers for most consumers.
- Bureaucratic Overreach: Placing the DOJ in charge of certifying complex software algorithms and policing printer sales adds layers of red tape without meaningfully addressing criminal activity, which is already illegal under existing manufacturing prohibitions.
SUPPORT
Everytown for Gun Safety (sponsor)
Asian American Christian Collaborative
Beverly Hills High School Students Demand Action
California Chapter of the American College of Emergency Physicians
CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO
Chapman University Students Demand Action
Everytown for Gun Safety Action Fund
Former City Attorney Mike Feuer, City of Los Angeles
GLMA: Health Professionals Advancing LGBTQ Equality
Indivisible Mid-peninsula
Moms Demand Action for Gun Sense in America
Newtown Action Alliance
Prosecutors Alliance Action
San Diegans for Gun Violence Prevention
San Diego County School Board Association
Students Demand Action At UC Davis
Students Demand Action for Gun Sense in America
UCLA Students Demand Action
OPPOSITION
California Rifle and Pistol Association, Inc.
Community Manufacturing Initiative
Esaero, Inc.
Gun Owners of California, Inc.
Inspired Flight Technologies
Invisible Pack Inc.
Mantis Composites Inc.
Matterhackers
National Rifle Association - Institute for Legislative Action
Streamline Aerospace
Trust Automation
Zone 5 Technologies
Five individuals
RELATED LEGISLATION
Pending Legislation: None known.
Prior Legislation:
AB 1263 (Gipson, Ch. 636, Stats. 2025) prohibited a person from knowingly or willfully causing another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of a firearm using a 3-D printer or CNC milling machine, and included computer-aided manufacturing files as a digital instruction and the manufacture of a machinegun and specified firearm components in provisions that authorizes civil actions against a person who knowingly distributes or causes to be distributed any digital firearm manufacturing code or digital instructions. See Comment 4.
AB 1089 (Gipson, Ch. 243, Stats. 2023) regulated three-dimensional printers and CNC milling machines as firearms related products, and required anybody who uses a three-dimensional printer or CNC milling machine to manufacture a firearm to be a state-licensed manufacturer. See Comment 4.
SB 1327 (Hertzberg, Ch. 146, Stats. 2022) established privately-enforced civil causes of action against any person who manufactures or causes to be manufactured, distributes, transports, or imports into the state, or causes to be distributed or transported or imported into the state, keeps for sale or offers or exposes for sale, or gives or lends any firearm lacking a required serial number, assault weapon, .50 BMG rifle, or firearm precursor part, as specified.
AB 2571 (Bauer-Kahan, Ch. 77, Stats. 2022) prohibited firearm industry members from advertising or marketing, as defined, firearm-related products to minors. The bill restricted the use of minors’ personal information in connection with marketing or advertising firearm-related products to those minors.
AB 1621 (Gipson, Ch. 76, Stats. 2022), among other things, prohibited the sale, transfer, or possession of an unserialized firearm precursor part, except as specified, and explicitly prohibited the possession or transfer of a firearm without a serial number or mark of identification.
AB 1594 (Ting, Ch. 98, Stats. 2022) established the Firearm Industry Responsibility Act to create a firearm industry standard of conduct, and prohibited a firearm industry member from manufacturing, marketing, importing, offering for wholesale sale, or offering for retail sale a firearm-related product that is abnormally dangerous and likely to create an unreasonable risk of harm to public health and safety. Also authorized a person harmed in California, the Attorney General, or city or county attorneys to bring civil action against firearm industry member for an act or omission in violation of the firearm industry standard of conduct.
AB 2156 (Wicks, Ch. 142, Stats. 2022) expanded the prohibitions on the manufacture of firearms without a state license including reducing the number of guns a person may manufacture without a license and prohibiting the use of a three-dimensional printer to manufacture any firearm without a license from the California Department of Justice. Chaptered.
PRIOR VOTES:
Assembly Floor (Ayes 58, Noes 19)
Assembly Appropriations Committee (Ayes 11, Noes 4)
Assembly Judiciary Committee (Ayes 9, Noes 3)
Assembly Public Safety Committee (Ayes 6, Noes 0)
**************
Gun Violence Archive, available at https://www.gunviolencearchive.org/. ↑
John Gramlich, “What the data says about gun deaths in the U.S.” Pew Research Center (Apr. 28, 2026), https://www.pewresearch.org/short-reads/2026/04/28/what-the-data-says-about-gun-deaths-in-the-us/. ↑
Gun Violence Archive, “Gun violence archive 2026” (Jun. 10, 2026) available at https://www.gunviolencearchive.org/. ↑
Jennifer Mascia, “How Many Guns are Circulating in the U.S.?” The Trace (Mar. 6, 2023), available at https://www.thetrace.org/2023/03/guns-america-data-atf-total/#:~:text=In%202020%2C%20the%20group%20reported,civilian%20possession%20is%20433.9%20million.%E2%80%9D. ↑
“Ghost Guns in California,” Giffords Law Center (Jun. 30, 2023), available at https://giffords.org/lawcenter/state-laws/ghost-guns-in-california/. ↑
Don Thompson, “Man Used ‘ghost gun’ to kill 3 daughters in church,” NBC Bay Area (Mar. 6, 2022 at 6:11 pm), available at https://www.nbcbayarea.com/news/california/man-used-ghost-gun-to-kill-3-daughters-in-church/2829422/. ↑
Office of District Attorney of the County of Santa Clara, “DA task force seizes ghost gun arsenal from San Jose teen,” (Feb. 26, 2026) https://da.santaclaracounty.gov/da-task-force-seizes-ghost-gun-arsenal-san-jose-teen. ↑
Meg Anderson, “Thousands of guns are found at crime scenes. What do they tell us?” NPR (Dec. 17, 2025) https://www.npr.org/2025/12/17/nx-s1-5641154/crime-guns-database-everytown-report. ↑
ASSEMBLY THIRD READING
ATR Bill Id:AB 2047
Author:(Bauer-Kahan)
As Amended Ver:May 18, 2026
Majority vote
SUMMARY
Requires the Department of Justice (DOJ) or other relevant state agency, among other things, to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms and any business that produces or manufactures three-dimensional printers for sale or transfer in California to submit to the DOJ an attestation for each make and model of printer they intend to make available for sale or transfer in California, as defined.
Major Provisions
- States that the DOJ or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms.
- States that the DOJ or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency, academic consortium, or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
- Requires on or before January 1, 2028, the DOJ or other relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with specified laws.
- States that the DOJ or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms. Stakeholder input may include, but is not limited to, identification of design files that should be used to evaluate if an algorithm is reaching a false-positive result that erroneously identifies the design file as a firearm or illegal firearm part blueprint.
- Provides that the performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
- Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
- Flag any disallowed files for rejection by a software control process.
- Provides that the performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
- States that the DOJ or other relevant state agency set standards for acceptable false-positive and false-negative rates in detection algorithm performance but shall not require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files. If the written guidance on performance standards determines that a novel technique with a substantially higher degree is available to be utilized by algorithm developers, the DOJ or other relevant agency shall issue an update to the written guidance on performance standards.
- The department or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards shall periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality.
- Provides that if, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified, as specified, the DOJ or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique.
- Provides that any vendor with a previously qualified algorithm who is required to make that update shall have a reasonable period of time, not less than three months, to update their previously qualified algorithm.
- States that the DOJ or relevant state agency shall engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
- Requires that on or before January 1, 2028, the DOJ or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes for three-dimensional printer manufacturer use in complying defined laws.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
- Establishes that the performance standards shall set minimum standards on developer testing but shall not require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
- States that the DOJ shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Provides that the performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
- Firmware design.
- Integrated preprint software design.
- Any other form, including, but not limited to, handshake authentication design or other design forms directed towards compatibility with open-source architecture, if the department first determines that the software controls process is both of the following:
- At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described.
- At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B).
- Provides that the written guidance shall include both of the following:
- For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
- For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
- States that DOJ or other relevant state agency preparing the written guidance on performance standards may adopt some or all of any set of performance standards created by a nongovernmental entity, including, but not limited to, an academic consortium or a global standard-setting nonprofit.
- Requires on or before March 1, 2028, the DOJ or other relevant state agency shall publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include: Performance standards performance standards on how to test functionality of the firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
- Establishes that the performance standards described above shall be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section.
- Requires on or before July 1, 2028, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the DOJ an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
- States that the self-attestation shall include all of the following information:
- The make and model of the three-dimensional printer.
- Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm.
- Confirmation that the manufacturer has equipped that make and model with a certified software controls process.
- Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the DOJ, as specified.
- States that if the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance and requesting further information about the type of firearm blueprint detection algorithm or software controls process used by the manufacturer.
- States that any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list, as described.
- Requires that on or before September 1, 2028, DOJ shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestation on file.
- Specifies that the lists shall be updated no less frequently than on a quarterly basis and made accessible on the DOJ's internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the department's internet website to ensure their inventory for sales in California consists of compliant three-dimensional printers.
- Provides that it shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged, specified violation that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the DOJ on the published list described, and not designated as having an incomplete attestation.
- States that any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described.
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described.
- States that any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the DOJ, as described.
- Provides that it shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
- The three-dimensional printer shall be equipped with firearm blocking technology.
- The three-dimensional printer shall be listed by the DOJ on the published list specified as having a complete attestation on file.
- Establishes that this section shall not apply to the following products:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined.
- Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
- Printers manufactured for and sold exclusively to entertainment industry stagecraft and propmaking studios.
- Provides that a civil action may be brought against a person who does either of the following:
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
- Knowingly files an attestation containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined.
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- States that a person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Provides that the Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed $25,000 for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- States that a prevailing plaintiff shall be entitled to recover reasonable attorney's fees and costs.
- States that the remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
- States that the DOJ may promulgate regulations and develop forms and publications necessary to implement this title.
- Provides that it is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to knowingly distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the DOJ's list of three-dimensional printers eligible for sale in California with the intent to facilitate the unlawful manufacture of firearms, as defined, as described. States that a violation of this section is a misdemeanor and does not preclude prosecution under any other law providing for a greater penalty.
- Removes the requirement that on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards, among other related requirements.
- Removes requirement that the list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of DOJ or other relevant state agency issuing certification, among other related requirements.
- Removes requirement that requires on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described shall accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards described, among other related requirements.
- Removes requirement that on or before July 1, 2028, the DOJ shall begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the DOJ to inspect and confirm that a specific make and model of printer complies with the performance standards, among other related requirements.
- Removes requirement stating that it shall be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.
- Defines "department" as the Department of Justice.
- Defines "firearm" as a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion.
- Defines "firearm blocking technology" as hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defines "firearm blueprint detection algorithm" as a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
- Defines "firearm precursor part" as any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted.
- Defines "firmware design" as integration of a firearms blueprint detection algorithm directly into a three-dimensional printer's firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defines "illegal firearm parts" as a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
- Defines "integrated pre-print software design" as a limitation of a three-dimensional printer's operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer's proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defines "pistol convertor" as any device or instrument that when installed in or attached to the rear of the slide of a semiautomatic pistol, replaces the backplate, and interferes with the trigger mechanism and thereby enables the pistol to shoot automatically more than one shot by a single function of the trigger. A pistol converter includes, but is not limited to, a pistol converter manufactured using a three-dimensional printer, as defined.
- Defines "software controls process" means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defines "three-dimensional printer" as a computer-aided manufacturing device capable of producing a three-dimensional object from a three-dimensional digital model through an additive manufacturing process that involves the layering of two-dimensional cross sections formed of a resin or similar material that are fused together to form a three-dimensional object.
COMMENTS
According to the Author
"California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional (3D) printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
"There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child.
"As technology evolves, it's important that consumer protections change with it to ensure the safety of our communities."
Arguments in Support
According to Brady United Against Gun Violence, "The Firearm Printing Prevention Act, which will combat the emerging crisis of 3D printed firearms by requiring that every 3D printer sold in our state comes with technology that will block 3D print jobs for firearms and illegal firearm parts that turn pistols into machine guns (machinegun-conversion devices, commonly called "switches" or "MCDs").
"Rapid evolution in the printing industry in recent years has radically increased the threat from 3D printed firearms. Over the past decade, 3D printers have improved in capabilities, dropped in price, and exploded in popularity. Entry-level models now cost as little as $250 and are capable of printing the critical components of firearms. Anyone with internet access can find thousands of digital instructional files for guns and illegal gun parts online.
"California's status as the state with the strongest gun laws makes 3D printing all the more appealing for people prohibited from owning firearms. In 2025, domestic abusers, teenagers, and large-scale criminal suppliers were found manufacturing 3D-printed firearms in California. Just in February 2026:
- Law enforcement in Santa Rosa seized over 165 guns and 3D printers from a 22-year-old ghost guns manufacturer.
- Victor Valley sheriffs arrested two men with a 3D-printed assault rifle, over 130 Polymer80 jigs (ghost gun making tools), 3D printer materials and a 3D printing guide for different firearms.
- A San Jose teen was caught with 27 finished or near-finished 3D-printed firearms, including [do it yourself] (DIY) machine guns, and two 3D printers.
"3D-printed firearms undermine our state's entire gun safety apparatus. Skip-the-background-check gun printing upends the entire system of gun safety laws - circumventing California's laws that seek to ensure guns don't end up in the hands of people with dangerous histories and that extremely dangerous weapons don't end up in our state.
"The good news is: the technology already exists to equip printers to identify and block these dangerous print jobs—this new legislation will simply ensure that printer manufacturers actually deploy these solutions and stop the spread of DIY firearms before it accelerates any further. The Firearm Printing Prevention Act is an upstream solution that builds on California's legacy of combating emerging firearm threats, like the first wave of ghost guns and DIY machine guns.
"California has taken early steps to prohibit personal manufacturing of firearms with a 3D printer and created pathways to civil liability for people who aid and abet illegal 3D firearm manufacturing. While those recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can't fully address this emerging threat to our foundational gun laws and public safety without this intervention at the manufacturing stage.
"We can help prevent illegal guns flowing into California communities and thwart gun traffickers trying to flout California's strong gun safety laws by ensuring that all 3D printers sold on the California household consumer retail market have firearm printing blocking technology installed. For these reasons, we strongly support AB 2047 and we urge the legislature to stand with us in combatting the emerging threat of 3D-printed firearms."
Arguments in Opposition
According to the National Rifle Association Institute for Legislative Action, "On the outset, the NRA has consistently opposed efforts to ban or restrict the use of 3D printing technology as it relates to the lawful exercise of the right to keep and bear arms. AB 2047 represents a significant expansion of such efforts, establishing an unprecedented regulatory regime that conditions the sale and use of 3D printers on state-approved software designed to detect and block firearm-related digital files.
"As a matter of policy, this approach raises significant constitutional and practical concerns. The bill implicates the Second Amendment by placing prospective restrictions on self-manufacture of firearms. By conditioning access to commonly available tools on government-imposed technology, the bill further burdens and prohibits the ability of law-abiding individuals to exercise a constitutional right.
"AB 2047 also raises serious First Amendment concerns. By mandating the use of state-approved filtering mechanisms to monitor and restrict digital files and code, the bill extends regulation into areas of protected expression. Requiring manufacturers to embed such controls, and penalizing their circumvention, introduces a government directed role in regulating the dissemination and use of information.
"In addition, the bill's reliance on evolving detection standards, that are not required to achieve complete accuracy, creates a substantial risk of overbreadth, potentially restricting lawful and unrelated digital content. At the same time, individuals' intent on unlawful activity remain unlikely to be deterred by software-based restrictions that can be modified or circumvented.
"For those reasons, we respectably encourage that the Committee reject Assembly Bill 2047."
FISCAL COMMENTS
According to the Assembly Appropriations Committee:
- Ongoing costs (General Fund, special funds) of an unknown but potentially significant amount to the Department of Justice (DOJ) to establish and operate a new multi-component regulatory program. DOJ's responsibilities include investigating firearm blueprint files and detection algorithms; maintaining a library of blueprint files (alone or in coordination with an academic partner); publishing performance standards for detection algorithms and software controls processes; publishing manufacturer guidance; processing manufacturer self-attestations; conducting voluntary compliance verifications; maintaining a quarterly-updated public list of printer makes and models; investigating questionable attestations; promulgating regulations; and enforcing civil penalties. These functions require technical expertise in 3D printing, software engineering, and algorithm evaluation that may be outside DOJ's existing capabilities, and implementation may require specialized staff or contracted technical expertise in addition to attorneys, investigators, and administrative support. The bill's authorization for DOJ to adopt performance standards developed by a nongovernmental entity may reduce standards-development workload.
- Cost pressures (Trial Court Trust Fund, General Fund) of an unknown but potentially significant amount to the courts for civil enforcement actions brought by the Attorney General, county counsel, city attorneys, and private plaintiffs under the bill's civil penalty and private right of action provisions. Actual costs will depend on the number of cases filed and the amount of court time needed to resolve each case. It generally costs approximately $1,000 to operate a courtroom for one hour. Although courts are not funded on the basis of workload, increased pressure on the Trial Court Trust Fund may create a demand for increased funding for courts from the General Fund. The state budget provides annual General Fund backfills to the Trial Court Trust Fund to offset revenue reductions, totaling approximately $117.3 million in 2025-26.
The Legislative Analyst's Office recently warned of General Fund structural deficits of around $35 billion per year beginning in the 2027-28 fiscal year.
VOTES
ASM PUBLIC SAFETY: 6-0-3
YES: Schultz, Mark González, Harabedian, Nguyen, Ramos, Sharp-Collins
ABS, ABST OR NV: Alanis, Haney, Lackey
ASM JUDICIARY: 9-3-0
YES: Kalra, Bauer-Kahan, Bryan, Connolly, Harabedian, Pacheco, Papan, Stefani, Zbur
NO: Macedo, Dixon, Sanchez
ASM APPROPRIATIONS: 11-4-0
YES: Wicks, Aguiar-Curry, Calderon, Caloza, Fong, Mark González, Krell, Pacheco, Pellerin, Sharp-Collins, Solache
NO: Hoover, Dixon, Ta, Tangipa
UPDATED
VERSION: May 18, 2026
CONSULTANT: Dustin Weber / PUB. S. / (916) 319-3744 FN: 0002915
Date of Hearing: May 13, 2026
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
ABPCA Bill Id:AB 2047
Author:(Bauer-Kahan) – As Introduced Ver:February 17, 2026
Policy Committee: | Public Safety | Vote: | 6 - 0 |
Judiciary | 9 - 3 | ||
|
|
Urgency: No State Mandated Local Program: Yes Reimbursable: No
SUMMARY:
This bill, the Firearm Printing Prevention Act, requires manufacturers of three-dimensional (3D) printers sold or transferred in California to equip those printers with firearm blocking technology, and establishes a Department of Justice (DOJ) regulatory program to investigate, certify, and oversee firearm blueprint detection algorithms, software controls processes, and manufacturer compliance.
Specifically, this bill:
- Requires DOJ to investigate known firearm blueprint design files and existing firearm blueprint detection algorithms, and authorizes DOJ to create and maintain, or coordinate with a University of California academic department to create and maintain, a library of firearm blueprint files.
- Requires DOJ, by July 1, 2027, to publish performance standards for firearm blueprint detection algorithms and software controls processes, and by January 1, 2028, to begin accepting applications and issuing certifications for both.
- Requires DOJ, by March 1, 2028, to publish guidance for 3D printer manufacturers on equipping printers with firearm blocking technology, and by July 1, 2028, to begin accepting manufacturer self-attestations and voluntary compliance verifications.
- Requires DOJ, by September 1, 2028, to publish and quarterly update a public list of printer makes and models with complete self-attestations, incomplete attestations, or compliance verifications.
- Prohibits the sale or transfer of 3D printers in California that are not equipped with certified firearm blocking technology and not listed on the DOJ public list, with exemptions for printers sold to state-licensed firearms manufacturers, specified law enforcement and military uses, and industrial users in aerospace, biomedical, automotive, and engineering sectors.
- Authorizes civil enforcement by the Attorney General, county counsel, city attorneys, and private individuals, with civil penalties up to $25,000 per violation, injunctive relief, and attorney's fees for prevailing plaintiffs.
- Makes it a misdemeanor to knowingly disable, deactivate, or circumvent firearm blocking technology in a 3D printer with intent to manufacture firearms, or to distribute modified versions of printers identified on the DOJ list.
FISCAL EFFECT:
- Significant ongoing costs (General Fund, special funds) to the Department of Justice (DOJ) to establish and operate a new multi-component regulatory program. DOJ has indicated that the costs are unquantifiable but very significant, and that the workload required under the bill is complex and requires technological expertise outside DOJ’s existing scope and capabilities, leaving DOJ unable to determine how it would implement the bill and what implementation would cost. DOJ’s responsibilities under the bill include: investigating existing firearm blueprint files and detection algorithms, developing and maintaining a library of firearm blueprint files (or coordinating with a University of California (UC) academic department to do so), publishing performance standards for detection algorithms and software controls processes by July 1, 2027, certifying and recertifying detection technology beginning January 1, 2028, publishing manufacturer guidance and processing manufacturer self-attestations on rolling deadlines through 2028, conducting voluntary compliance verifications and sample testing, maintaining a quarterly-updated public list of compliant and non-compliant printer makes and models, investigating questionable attestations, promulgating regulations, and enforcing civil penalties. These functions require technical expertise in 3D printing, firearms manufacturing, software engineering, and algorithm evaluation that DOJ has indicated is outside its existing scope. Implementation would require new specialized staff or contracted technical expertise, as well as additional attorneys, investigators, and administrative support. Partnership with a UC academic department for library maintenance, if pursued, would involve additional interagency or contract costs.
- Cost pressures (Trial Court Trust Fund, General Fund) of an unknown but potentially significant amount to the courts for civil enforcement actions brought by the Attorney General, county counsel, city attorneys, and private plaintiffs under the bill’s civil penalty and private right of action provisions. Actual costs will depend on the number of cases filed and the amount of court time needed to resolve each case. It generally costs approximately $1,000 to operate a courtroom for one hour. Although courts are not funded on the basis of workload, increased pressure on the Trial Court Trust Fund may create a demand for increased funding for courts from the General Fund. The state budget provides annual General Fund backfills to the Trial Court Trust Fund to offset revenue reductions, totaling approximately $117.3 million in 2025-26.
The Legislative Analyst’s Office recently warned of General Fund structural deficits of around $35 billion per year beginning in the 2027-28 fiscal year.
COMMENTS:
- Purpose. According to the author:
California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child. As technology evolves, it’s important that consumer protections change with it to ensure the safety of our communities.
- Background. Ghost guns — firearms manufactured without serial numbers by persons not licensed to manufacture firearms — have been a growing enforcement concern in California. According to DOJ, California law enforcement agencies recorded a 1,236% increase in the number of ghost guns recovered from crimes involving family violence between 2019 and 2021. As highlighted by the Judiciary Committee’s analysis, enforcement activity in early 2026 illustrates the scope of the problem: in February 2026, Santa Rosa police seized over 165 firearms and multiple 3D printers from a suspected ghost gun manufacturer, and a San Jose teenager was found with 27 finished or near-finished 3D-printed firearms and two printers.
Existing law already prohibits the use of a 3D printer to manufacture a firearm by any person other than a state-licensed firearms manufacturer, prohibits selling, transferring, or possessing a 3D printer whose sole or primary function is manufacturing firearms, authorizes civil actions against persons who knowingly distribute digital firearm manufacturing code, and creates a rebuttable presumption of unlawful conduct for certain targeted marketing of 3D printers for firearm manufacture.
This bill shifts enforcement upstream by requiring printer manufacturers to build detection and blocking technology into consumer 3D printers. Under the bill, DOJ or another designated state agency develops performance standards for detection algorithms and software controls processes, certifies qualifying technologies through an application and testing process, publishes manufacturer guidance, accepts manufacturer self-attestations, conducts voluntary compliance verifications, and maintains a public list of compliant and non-compliant printer models. Exemptions apply to printers sold exclusively to state-licensed firearms manufacturers, specified state and federal law enforcement users, and non-consumer industrial applications (aerospace, biomedical, automotive, and chemical/mechanical engineering). Operative dates for the sale and transfer prohibitions are delayed to provide time for the regulatory framework to be established.
Both the Public Safety and Judiciary Committee analyses discuss the bill’s constitutional exposure, including Second Amendment and dormant Commerce Clause issues. To the extent the bill is challenged in court, any defense costs would be borne by the Department of Justice.
Analysis Prepared by: Shiran Zohar / APPR. / (916) 319-2081
Date of Hearing: April 14, 2026
ASSEMBLY COMMITTEE ON JUDICIARY
Ash Kalra, Chair
ABPCA Bill Id:AB 2047
Author:(Bauer-Kahan) – As Introduced Ver:February 17, 2026
SUBJECT: Firearms: 3-dimensional printing blocking technology
KEY ISSUE: Should the legislature require manufacturers of 3-dimensional printers to install technology in those printers that blocks the printing of illegal ghost guns?
SYNOPSIS
To stem the proliferation of “ghost guns” in California communities, the Legislature has enacted a series of common-sense measures to prevent manufacturing and distribution of these unlawful firearms. With the increase in the availability of three-dimensional printers, law enforcement agencies have noticed a significant increase in individuals using these printers to unlawfully manufacture their own ghost guns. While using a three-dimensional printer to manufacture a firearm without a license is unlawful, there are no true barriers to doing so in the first instance. This bill addresses this issue by requiring manufacturers of three-dimensional printers to install a “firearm blocking technology” on printers sold or transferred in the state to prevent a user from printing a firearm altogether.
Additionally, the bill requires the California Department of Justice or another relevant agency to develop performance standards and written guidance to ensure quality and consistency in connection with the use of the firearm blocking technology. Further, the bill makes these entities responsible for certifying that a manufacturer has complied with the bill. Finally, the bill would impose civil penalties on those found in violation of the bill’s provisions and provides a civil cause of action for those harmed as the result of a violation of the bill.
This bill, sponsored by Everytown USA, is supported by a number of gun violence prevention organizations, health professional organizations, district attorney offices, among others. These groups contend that this bill provides a means to prevent the further spread of unlawful and dangerous firearms. The bill is opposed by guns’ rights advocacy organizations, privacy experts, and many individuals. These groups contend that the bill is unconstitutional, impedes privacy rights, and is unlikely to be successful at reducing the spread of ghost guns. This bill was approved by the Assembly Public Safety Committee, where it passed out with 6 aye votes.
SUMMARY: Requires the installation of firearm blocking technology on three-dimensional printers sold or transferred in the state, and designates the Department of Justice or another state agency to develop performance standards, written guidance, among other things, to ensure the efficacy, quality, and consistency of firearm blocking technologies used for this purpose. Specifically, this bill:
- Requires the Department of Justice or other relevant state agency to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms.
- Allows the Department of Justice or other relevant state agency to create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or to coordinate with another government agency or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
- Requires the Department of Justice or other relevant state agency, on or before July 1, 2027, to publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with this bill’s provisions.
- Allows the Department of Justice or other relevant state agency to seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms.
- Provides that the performance standards described in 3) must require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
- Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
- Flag any disallowed files for rejection by a software control process.
- Specifies that the performance standards described in 3) must require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
- Specifies that the Department of Justice or other relevant state agency cannot require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files.
- Requires the Department of Justice or other relevant state agency preparing the written guidance on performance standards described in 3) to include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files.
- Requires the Department of Justice or other relevant state agency preparing the written guidance on performance standards described above to periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality.
- Provides that if, at any time, the Department of Justice or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified pursuant to the provisions of this bill the department or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique. Specifies that any vendor with a previously qualified algorithm who is required to make that update will have a reasonable period of time, not less than three months, to update their previously qualified algorithm.
- Requires the Department of Justice or other relevant state agency that prepared the written guidance on performance standards described above to, on or before January 1, 2028, accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards.
- Requires the Department of Justice or other relevant state agency that prepared the written guidance on performance standards described above, for purposes of evaluating applications for firearm blueprint detection algorithm certification, to require applicants to satisfy both of the following:
- Identify the inventory of firearm blueprint files used to design the algorithm so that the department or other relevant state agency evaluating applicants may assess and confirm that the file inventory is sufficiently thorough.
- Provide access for testing, as well as schematics or other detailed explanation of their technology sufficient for the department or other relevant state agency evaluating applicants to evaluate its suitability for certification.
- Requires the list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards to be made publicly available on the internet website of the department or other relevant state agency issuing certification.
- Requires the Department of Justice or other relevant state agency issuing the certification described in 11) to revoke certification for a firearms blueprint detection algorithm if, at any time, it fails to meet the performance standards for certification, including, without limitation, failure by a certified algorithm to implement regular updates to its inventory of disallowed files as required by the department or relevant state agency, or to update its technology to match the state-of-the-art performance of an emerging detection technique as required by the Department of Justice.
- Requires the Department of Justice or relevant state agency, in the event of a revocation described in 14), to notify relevant printer manufacturers with printer models known to use that algorithm that an algorithm they have deployed is no longer certified. Provides that the manufacturer will have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology.
- Requires the Department of Justice or relevant state agency to engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
- Requires the Department of Justice or relevant agency to publish, on or before July 1, 2027, written guidance on performance standards for persons or entities engaged in the creation of software controls processes to be certified for three-dimensional printer manufacturer use in complying with the bill’s provisions.
- Allows the Department of Justice or other relevant state agency preparing the written guidance on performance standards described in 17) to seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
- Specifies that the performance standards described in 17) must require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
- Provides that the Department of Justice cannot require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Requires the performance standards described in 17) to set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
- Firmware design.
- Integrated preprint software design.
- Any other form, including, but not limited to, handshake authentication design, if the department first determines that the software controls process is both of the following:
- At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described above 21 a) and b).
- At least as resistant to being defeated by a technically skilled user as the design forms described above 21 a) and b)
- Requires the written guidance described in 17) to include both of the following:
- For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
- For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
- Requires the Department of Justice or other relevant state agency that prepared the written guidance on performance standards described in 17) to, on or before January 1, 2028, accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards.
- Requires the Department of Justice or other relevant state agency, for purposes of evaluating applications for certification, to require applicants to provide software and hardware, as applicable, for testing by regulators, as well as schematics or other detailed explanation of their technology sufficient for the department to evaluate its suitability for certification.
- Requires the list of software controls processes that have received certification as meeting or exceeding performance standards to be made publicly available on the internet website of the Department of Justice or other relevant state agency issuing certification.
- Requires the Department of Justice or other state agency that issued certification to revoke certification for a software controls process if, at any time, it fails to meet the performance standards for certification.
- Requires the Department of Justice or other state agency that issued a certification, in cases where the certification for a software controls process has been revoked for failure to meet performance standards, to notify relevant printer manufacturers with printer models known to use that software controls process that a software controls process they have deployed is no longer certified. Specifies that a manufacturer will have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, in these cases.
- Requires the Department of Justice or other relevant state agency to, on or before March 1, 2028, publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance must include all of the following:
- Performance standards for equipping three-dimensional printers with a certified firearm blueprint detection algorithm and where to find updated lists of certified firearm blueprint detection algorithms published by the department.
- Performance standards for equipping three-dimensional printers with a certified software controls process and where to find updated lists of certified software controls processes published by the department.
- Performance standards on how to test functionality of the certified firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
- Requires the performance standards described in 28) to be made publicly available on the internet website of the Department of Justice or the state agency that prepared the written guidance on performance standards.
- Requires any business that produces or manufactures three-dimensional printers for sale or transfer in California to, on or before July 1, 2028, submit to the Department of Justice an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
- Requires the self-attestation described in 30) to include all of the following information:
- The make and model of the three-dimensional printer.
- Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm and which certified firearm blueprint detection algorithm from the list published was used.
- Confirmation that the manufacturer has equipped that make and model with a certified software controls process and which certified software controls process from the list published was used.
- Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the Department of Justice.
- Authorizes the Attorney General to investigate and inspect the submission of a self-attestation form that is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance.
- Provides that any make and model of three-dimensional printer actively under investigation and inspection must be identified as having an incomplete attestation on the list.
- Requires the Department of Justice to, on or before July 1, 2028, begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the department to inspect and confirm that a specific make and model of printer complies with the performance standards described above.
- Requires the Department of Justice to issue to a manufacturer a written notice of compliance verification for a given make and model, if the department verifies a printer make and model is properly equipped with firearm blocking technology.
- Provides that no manufacturer of a printer for which a written notice of compliance verification has been issued under this bill’s provisions is subject to civil actions brought pursuant to this bill. Specifies that this does not apply to a manufacturer who received notice from the Department of Justice that the previously verified model contained a firearms blueprint detection algorithm for which certification was revoked or a software controls process for which certification was revoked, until the manufacturer updates their model and resubmits the model for an updated compliance verification.
- Requires the Department of Justice to, on or before September 1, 2028, publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations, any makes and models of three-dimensional printers that have an incomplete attestation on file, any makes and models that have submitted for and received the voluntary compliance verification, and any makes and models that have a pending submission for voluntary compliance verification.
- Requires the lists to be updated no less frequently than on a quarterly basis and made accessible on the Department of Justice’s internet website.
- Requires retailers or distributors of three-dimensional printers to consult the lists posted on the department’s internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
- Provides an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged violation of this bill that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
- Requires any business that produces or manufactures three-dimensional printers for sale or transfer in California to do the following:
- Equip the three-dimensional printer with certified firearm blocking technology before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California.
- Submit a self-attestation of installation of firearm blocking technology to the Department of Justice before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California.
- Requires any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California to consult the list published by the Department of Justice.
- Provides that it is unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
- The three-dimensional printer is equipped with firearm blocking technology.
- The three-dimensional printer is listed by the Department of Justice on the published list described above as having a complete attestation on file, having received a certificate of compliance verification, or having a pending application for a certificate of compliance verification.
- Exempts the following products from specified provisions of the bill:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer.
- Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
- Allows a civil action to be brought against a person who does either of the following:
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- Knowingly files an attestation containing false information. Specifies that the filing of this civil action does not preclude criminal prosecution for perjury.
- Specifies that it shall be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.
- Authorizes a person who has suffered harm in California as a result of a violation of this section to bring an action in a court of competent jurisdiction to establish that a person has violated specified provisions of this bill, and seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Provides that the Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this bill’s provisions, and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Provides that a prevailing plaintiff is entitled to recover reasonable attorney’s fees and costs.
- Specifies that the remedies provided by this bill are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
- Provides that 42) through 50) will become operative on March 1, 2029.
- Authorizes the Department of Justice to promulgate regulations and develop forms and publications necessary to implement this bill.
- Prohibits knowingly disabling, deactivating, uninstalling, or otherwise circumventing any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the Department of Justice’s list of three-dimensional printers eligible for sale in California. Specifies that doing so is a misdemeanor.
- Specifies that provisions of this bill are severable, and that if any provision of this bill or its application are held invalid, that invalidity does not affect other provisions or applications that can be given effect without the invalid provision or application.
- Defines all of the following for the purpose of the bill:
- “Firearm blocking technology” to mean hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- “Firearm blueprint detection algorithm” to mean a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
- “Firmware design” to mean integration of a firearms blueprint detection algorithm directly into a three-dimensional printer’s firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- “Illegal firearm parts” to mean a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
- “Integrated pre-print software design” to mean a limitation of a three-dimensional printer’s operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer’s proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- “Software controls process” to mean a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- “Three-dimensional printer” to mean a computer-aided manufacturing device capable of producing a three-dimensional object from a three-dimensional digital model through an additive manufacturing process that involves the layering of two-dimensional cross sections formed of a resin or similar material that are fused together to form a three-dimensional object.
EXISTING LAW:
- Prohibits a person, other than a state-licensed firearms manufacturer, from using a computer numerical control (CNC) milling machine or three-dimensional printer to manufacture a firearm. (Penal Code Section 29185 (a).)
- Provides that it is unlawful to sell, offer to sell, or transfer a CNC milling machine or three-dimensional printer that has the sole or primary function of manufacturing firearms to any person in this state, other than a state-licensed firearms manufacturer. (Penal Code Section 29185 (b).)
- Provides that it is unlawful for any person in this state other than a state-licensed firearms manufacturer to possess, purchase, or receive a CNC milling machine or three-dimensional printer that has the sole or primary function of manufacturing firearms. (Penal Code Section 29185 (c).)
- Authorizes a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, member of the Armed Forces of the United States or the National Guard, while on duty and acting within the scope and course of employment, or any law enforcement agency or forensic laboratory. (Civil Code Section 3273.61 (a).)
- Provides a rebuttable presumption that a person has engaged in the sale, offering to sell, transferring, advertising, or marketing of a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in this state to engage in conduct prohibited by 1) if both of the following are true:
- The person offers to sell, advertises, or markets a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s utility in manufacturing firearms, regardless of whether the machine or printer is otherwise described or classified as having any other capabilities.
- The person sells or transfers the CNC milling machine or three-dimensional printer without verifying that a purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited from purchasing or using the machine or printer to manufacture firearms. (Civil Code Section 3273.62 (b).)
- Provides that it is unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civil Code Section 3273.625 (a).)
- Defines the “unlawful manufacture or firearms” to include any of the following:
- The manufacture of a firearm by a minor, or by a person who is prohibited from owning or possessing firearms under California law.
- The manufacture of four or more firearms within the state in the same calendar year by an individual who is not licensed to manufacture firearms pursuant to California law.
- The manufacture of any firearm using a three-dimensional printer or computer numerical control (CNC) milling machine by an individual who is not licensed to manufacture firearms pursuant to California law. (Penal Code Section 29186 (b); Civil Code Section 3273.625 (b).)
FISCAL EFFECT: As currently in print this bill is keyed fiscal.
COMMENTS: “Ghost guns” or firearms manufactured without valid serial numbers by individuals not licensed to manufacture firearms have become an increasing threat to California communities. The ghost gun market allows individuals who are prohibited from accessing firearms to evade the background check process and more easily acquire firearms, ultimately hampering law enforcement efforts to disarm perpetrators of violence and abuse. From 2019 to 2021, California law enforcement agencies recorded a “1,236% increase in the number of ghost guns recovered from crimes involving violence or abuse against a family member.” (California Department of Justice, California’s Fight Against the Ghost Gun Crisis: Progress and New Challenges, (Oct. 2024).)
Unfortunately, with the widespread availability and use of three-dimensional printers, individuals are increasingly using them to print ghost guns in their own homes. Just this February, there have been multiple reports of individuals allegedly using three-dimensional printers to print ghost guns. In San Jose, an 18-year-old male is accused of using two three-dimensional printers to create 27 finished or almost finished firearms. (County of Santa Clara Office of the District Attorney, DA task force seizes ghost gun arsenal from San Jose teen, (Feb. 26, 2026), available at: https://da.santaclaracounty.gov/da-task-force-seizes-ghost-gun-arsenal-san-jose-teen.) In another case, Sonoma County police seized firearms, high-capacity magazines, multiple three-dimensional printers, as well as a laptop believed to be associated with the manufacturing of illegal firearms. (Tim Fang, Santa Rosa police seize over 165 firearms, arrest suspected ghost gun manufacturer, (Feb. 11, 2026), CBS News available at: https://www.cbsnews.com/sanfrancisco/news/santa-rosa-167-guns-seized-cloverdale-suspected-ghost-gun-manufacturer-arrested/.)
Because of stories like these and others, California has enacted a series of common-sense measures to stem the proliferation of these unlawful weapons. This bill is the latest in that series. According to the author:
California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child.
As technology evolves, it’s important that consumer protections change with it to ensure the safety of our communities.
This bill adopts a comprehensive approach to preventing the further spread of ghost guns through three principal approaches.
First, the bill requires any business that produces or manufactures three-dimensional printers for sale or transfer in the state to equip those printers with firearm blocking technology to prevent users from printing their own firearms. These businesses and manufacturers would similarly be required to submit a self-attestation specifying that its printers were equipped with that technology. The bill also makes it a misdemeanor to knowingly disable, deactivate, or uninstall this technology when it is installed on a printer.
Second, the bill tasks the Department of Justice or another relevant agency with undertaking several steps to ensure quality and consistency in connection with the firearm detection technologies required by this bill. Specifically, the bill requires the Department of Justice or another relevant agency to, among other things, investigate the known firearm blueprint design files and existing firearm blueprint detection algorithms, publish written guidance an performance standards regarding those detection algorithms, periodically review emerging detection software techniques, and issue certifications of detection algorithms that meet or exceed the performance standards developed by these entities.
Finally, the bill provides for civil enforcement of the bill’s provisions. Specifically, the bill allows for civil action to be brought if a person sells, offers to sell, or transfers a three-dimensional printer in the state that is not equipped with firearm blocking technology. The Attorney General, a county counsel, or a city attorney can bring an action to enforce specified provisions of this bill and may seek a civil penalty of up to $25,000 per violation as well as injunctive relief, and may recover reasonable attorney’s fees. Similarly, a person who has suffered harm because of a violation of this bill’s provisions can bring an action to seek compensatory damages and injunctive relief.
The bill delays implementation of all of the above provisions until May 1, 2029, giving ample time for manufacturers to comply with its provisions.
Given the ease with which individuals can access three-dimensional printers and use those printers to create their own firearms or firearm precursor parts, the bill’s preventative approach seems reasonable. While existing laws criminalize the use of three-dimensional printers for the printing of ghost guns, nothing in reality stops a user from doing so. Physically limiting the ability of users of three-dimensional printers from printing ghost guns may be one of the best ways to reduce the prevalence of ghost guns in our communities. Of course, as with any gun violence prevention legislation, opponents and critics have raised many constitutional concerns.
The Second Amendment & Ghost Guns. Because this bill seeks to prevent the production of firearms and firearm precursor parts, it arguably implicates the Second Amendment of the U.S. Constitution. However, under the test articulated by the U.S. Supreme Court in New York State Rifle & Pistol Association v. Bruen, ((2022) 597 U.S. 1, 24), it is unlikely that this bill violates the Second Amendment. First, to fall within the purview of the Second Amendment, a law must target conduct that is covered by the plain text of the amendment. (Id.) If the conduct is covered, then the government is required to justify the law by “demonstrating that it is consistent with the Nation’s historical tradition of firearm regulation.” (Id.)
In the first instance, the provisions of this bill are unlikely to be covered by the plain text of the Second Amendment, which simply provides individuals with the right to “keep and bear arms.” At its core, the bill prevents commercial manufacturers of three-dimensional printers from selling printers capable of printing firearms or firearm precursor parts, with some exceptions for specified industries. This commercial activity is likely outside of the conduct covered by the Second Amendment, as the plain text focuses on possession of an actual firearm, as opposed to the possession of one means of manufacturing a firearm. Because the bill’s restrictions are arguably not covered by the Second Amendment’s plain text, there is no need to analyze whether the law is consistent with this Nation’s tradition of firearm regulation.
Moreover, existing California law already prohibits the unlawful manufacturer of firearms using three-dimensional printers. (Penal Code Section 29185 (a)), and courts have yet to strike this prohibition down on Second Amendment grounds.
Privacy & Surveillance Concerns. Finally, a number of opponents have expressed privacy concerns about the use of government-mandated technology on three-dimensional printers. Specifically, these groups appear to take issue with how firearm blocking technology will be used to scan and review print jobs in three-dimensional printers, and the potential for such technology to be exploited to conduct mass surveillance and censorship by government entities.
It is unclear whether the use of firearm blocking technology as proposed by this bill can be fully reconciled with these issues. Fundamentally, it seems like individual users of three-dimensional printers on the whole will have to endure some reduction in their privacy rights for this bill to achieve its purpose, though there may be ways to incentivize manufacturers and businesses to not abuse any additional access they may have to user’s information, and similarly limit unreasonable government access to that information.
ARGUMENTS IN SUPPORT: This bill enjoys the support of several gun violence prevention organizations, district attorney offices, health-professional organizations, student organizations, and individuals, among others. In support of the bill, Everytown for Gun Safety, Moms Demand Action for Gun Sense in America, and Students Demand Action for Gun Sense in America state:
While California’s recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without an intervention at the manufacturing stage. And there’s good news on this front: the technology already exists to equip printers to identify and block these dangerous firearm print jobs. AB 2047 will simply ensure that printer manufacturers actually deploy these technological solutions and stop the spread of DIY firearms before it accelerates any further.
Similarly, the California Police Chiefs Association writes:
The rapid advancement and accessibility of 3D printing technology has fundamentally changed the landscape of firearm production. These 3D printers have become more affordable and capable, while digital blueprints for firearms and illegal conversion devices are widely accessible online. This combination creates a pathway for individuals—including those prohibited from possessing firearms—to manufacture dangerous weapons outside of California’s regulatory framework.
From a public safety perspective, this trend is deeply concerning. Law enforcement agencies across California are encountering cases involving 3D-printed firearms, including those produced by individuals engaged in criminal activity, firearm trafficking, and other illegal conduct. These weapons undermine California’s comprehensive gun safety laws and increase risks to officers and the communities they serve.
AB 2047 takes a forward-looking and preventative approach to this problem. Rather than relying solely on enforcement after illegal firearms are produced, the bill seeks to intervene earlier in the process by requiring manufacturers to incorporate existing technology that can detect and block the printing of firearm components. This upstream solution is both practical and necessary to keep pace with evolving technology and emerging threats.
ARGUMENTS IN OPPOSITION: This bill is opposed by several guns’ rights advocacy organizations. In opposition to the bill, the National Rifle Association – Institute for Legislative Action writes:
On the outset, the NRA has consistently opposed efforts to ban or restrict the use of 3D printing technology as it relates to the lawful exercise of the right to keep and bear arms. AB 2047 represents a significant expansion of such efforts, establishing an unprecedented regulatory regime that conditions the sale and use of 3D printers on state-approved software designed to detect and block firearm-related digital files.
As a matter of policy, this approach raises significant constitutional and practical concerns. The bill implicates the Second Amendment by placing prospective restrictions on self-manufacture of firearms. By conditioning access to commonly available tools on government-imposed technology, the bill further burdens and prohibits the ability of law-abiding individuals to exercise a constitutional right.
AB 2047 also raises serious First Amendment concerns. By mandating the use of state-approved filtering mechanisms to monitor and restrict digital files and code, the bill extends regulation into areas of protected expression. Requiring manufacturers to embed such controls, and penalizing their circumvention, introduces a government directed role in regulating the dissemination and use of information.
Additionally, several individuals and organizations oppose the bill, in part, because it presents a threat to the privacy of individual users of three-dimensional printers. For example, the Electronic Frontier Foundation and Privacy Rights Clearinghouse note:
What A.B. 2047 will demonstrably do, however, is create a system in which every 3D print job is scanned to determine if it is acceptable, implicating the privacy of all 3D printer users while also laying the groundwork for future censorship. Due to hardware limitations of 3D printers, this cannot be handled locally on-device. The only feasible ways to compare a print job to an updated database of prohibited files would be to give manufacturers access to prints through cloud-based or cloud-enabled first party software. That is, a system is created in which every print job an individual runs, whether that be for a medical device or protest equipment, becomes susceptible to surveillance by the vendor of their 3D printer. This mass surveillance is worrying on its own. Once the infrastructure is in place however, it can be broadened and abused by governments and corporations to prevent socially or politically sensitive 3D printed designs, or enable abusive enforcement of patents and copyrights that does not account for defenses like fair use.
As written, A.B. 2047 would not prevent the creation of ghost guns, violates the privacy
of users of 3D printers, and creates a dangerous precedent through which other actors may use to prevent legitimate forms of expression.
REGISTERED SUPPORT / OPPOSITION:
Support
American Academy of Pediatrics, California
Asian American Christian Collaborative
Beverly Hills High School Students Demand Action
Brady California
Brady Campaign
Brady United Against Gun Violence
CA Moms Demand Action
California Chapter of the American College of Emergency Physicians
California Police Chiefs Association
CFT – a Union of Educators & Classified Professionals, AFT, AFL-CIO
Chapman University Students Demand Action
Consumer Protection Policy Center/USD School of Law
Everytown for Gun Safety Action Fund
Former City Attorney Mike Feuer, City of Los Angeles
Giffords
GLMA: Health Professionals Advancing LGBTQ Equality
Moms Demand Action for Gun Sense in America
Newtown Action Alliance
Prosecutors Alliance Action
San Diego City Attorney's Office
Students Demand Action At UC Davis
Students Demand Action for Gun Sense in America
UCLA Students Demand Action
Youth Alive!
32 individuals
Opposition
ACLU California Action
California Rifle and Pistol Association, INC.
Californians United for a Responsible Budget
Community Manufacturing Initiative
Electronic Frontier Foundation
Gun Owners of California, INC.
National Rifle Association - Institute for Legislative Action
Pivotal Design, INC.
Privacy Rights Clearinghouse
254 individuals
Analysis Prepared by: Kristian Wright / JUD. / (916) 319-2334
Date of Hearing:
Counsel: Dustin Weber
ASSEMBLY COMMITTEE ON
Nick Schultz, Chair
ABPCA Bill Id:
Author:() – As Ver:
SUMMARY:
Requires the Department of Justice (DOJ) or other relevant state agency, among other things, to engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms and any business that produces or manufactures three-dimensional printers for sale or transfer in California to submit to the DOJ an attestation for each make and model of printer they intend to make available for sale or transfer in California, as defined. Specifically, this bill:
- States that the DOJ or other relevant state agency shall engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms.
- States that the DOJ or other relevant state agency may create, maintain, and regularly update a library of firearm blueprint files and illegal firearm parts blueprint files for use by firearm blueprint detection algorithm designers, or may coordinate with another government agency or major research institution, including, but not limited to, a University of California academic department, to create, maintain, and regularly update a library with safeguards to prevent unauthorized access to, or misuse of, the library.
- Requires on or before July 1, 2027, the DOJ or other relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for three-dimensional printer manufacturer use in complying with specified laws.
- States that the DOJ or other relevant state agency may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for firearm blueprint detection algorithms.
- Provides that the performance standards shall require that firearm blueprint detection algorithms have the capacity, with a high degree of accuracy, to do all of the following:
- Evaluate three-dimensional printing files, whether in the form of STL files or other computer-aided design files or geometric code.
- Detect and identify any such files that can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts.
- Flag any disallowed files for rejection by a software control process.
- Provides that the performance standards shall require that, at a minimum, firearm blueprint detection algorithms have the capacity to utilize an inventory of disallowed firearm blueprint files that have been commonly downloaded or shared on public internet forums to detect those files and modified versions of those files.
- States that the DOJ or other relevant state agency shall not require that a firearm blueprint detection algorithm produce a perfect success rate at detecting disallowed files.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards shall include performance standards requiring that the firearm blueprint detection algorithm have the capacity to implement regular updates to the set of disallowed firearm files it has the capacity to detect, to an extent and with a frequency to be determined by the department that accounts for the rate of innovation for the design and availability of new firearm blueprint files.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards shall periodically review emerging detection software techniques, including, but not limited to, advanced forms of image recognition and pattern analysis as well as volumetric search functionality.
- Provides that if, at any time, the department or other relevant state agency preparing the written guidance on performance standards determines that a novel technique with a substantially higher degree of performance is available to be utilized by algorithms already certified, as specified, the DOJ or other relevant state agency preparing the written guidance on performance standards may require that previously certified algorithms update their technology to match or exceed the performance of that novel technique.
- Provides that any vendor with a previously qualified algorithm who is required to make that update shall have a reasonable period of time, not less than three months, to update their previously qualified algorithm.
- Requires that on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described in this section shall accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed the performance standards, as described.
- States that for purposes of evaluating applications for firearm blueprint detection algorithm certification, the DOJ or other relevant state agency that prepared the written guidance on performance standards described in this section shall require applicants to satisfy both of the following:
- Identify the inventory of firearm blueprint files used to design the algorithm so that the department or other relevant state agency evaluating applicants may assess and confirm that the file inventory is sufficiently thorough.
- Provide access for testing, as well as schematics or other detailed explanation of their technology sufficient for the department or other relevant state agency evaluating applicants to evaluate its suitability for certification.
- Provides that the list of firearm blueprint detection algorithms that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.
- Requires the DOJ or other relevant state agency issuing certification to revoke certification for a firearms blueprint detection algorithm if, at any time, it fails to meet the performance standards for certification, including, without limitation, failure by a certified algorithm to implement regular updates to its inventory of disallowed files as required by the DOJ or relevant state agency, or to update its technology to match the state-of-the-art performance of an emerging detection technique as required.
- States that in the event of a specified revocation, the DOJ or relevant state agency shall notify relevant printer manufacturers with printer models known to use that algorithm that an algorithm they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described.
- States that the DOJ or relevant state agency shall engage in an investigation of existing software controls processes available for use in three-dimensional printers for the purpose of preventing three-dimensional printing of firearms and illegal firearm parts.
- Requires that on or before July 1, 2027, the DOJ or relevant state agency shall publish written guidance on performance standards for persons or entities engaged in the creation of software controls processes to be certified for three-dimensional printer manufacturer use in complying defined laws.
- States that the DOJ or other relevant state agency preparing the written guidance on performance standards may seek input from relevant stakeholders and technical experts in the process of preparing written guidance on performance standards for software controls processes, including from persons who provide software, firmware, or other services integral to establishing software controls processes for three-dimensional printers.
- Establishes that the performance standards shall require that software controls processes have the capacity, to a high degree of reliability, to effectively prevent a technically skilled user from evading a firearms blueprint detection algorithm.
- States that the DOJ shall not require that a software controls process produces a perfect success rate at preventing a user from evading a firearms blueprint detection algorithm.
- Provides that the performance standards shall set out options for design forms that may be used for a software controls process integration into a three-dimensional printer, including all of the following:
- Firmware design.
- Integrated preprint software design.
- Any other form, including, but not limited to, handshake authentication design, if the department first determines that the software controls process is both of the following:
- At least as effective in ensuring no print jobs can proceed unless they are evaluated by a firearm blueprint detection algorithm as the design forms described.
- At least as resistant to being defeated by a technically skilled user as the design forms described in subparagraphs (A) and (B).
- Provides that the written guidance shall include both of the following:
- For firmware design, guidance for how vendors are required to demonstrate that their technology will ensure a printer directs potential print jobs to the algorithm before printing can occur.
- For integrated preprint software design, guidance for how vendors shall demonstrate that printers will accept print jobs exclusively from a single preprint software and will not accept print jobs from any other preprint software, including from a user seeking to evade a detection algorithm.
- Requires that on or before January 1, 2028, the DOJ or other relevant state agency that prepared the written guidance on performance standards described shall accept applications for certification of software controls processes and begin issuing certifications of software controls processes that meet or exceed the performance standards described.
- Provides that for purposes of evaluating applications for certification, the department or other relevant state agency evaluating applicants shall require applicants to provide software and hardware, as applicable, for testing by regulators, as well as schematics or other detailed explanation of their technology sufficient for the DOJ to evaluate its suitability for certification.
- Establishes that the list of software controls processes that have received certification as meeting or exceeding performance standards shall be made publicly available on the internet website of the department or other relevant state agency issuing certification.
- States that the DOJ or other state agency that issued certification shall revoke certification for a software controls process if, at any time, it fails to meet the performance standards for certification. In that case, the DOJ or other state agency that issued certification shall notify relevant printer manufacturers with printer models known to use that software controls process that a software controls process they have deployed is no longer certified, and the manufacturer shall have a reasonable period, not less than three months, to update their model and resubmit their attestation of use of certified blocking technology, as described.
- Requires on or before March 1, 2028, the DOJ or other relevant state agency shall publish written guidance on performance standards for manufacturers of three-dimensional printers on how to equip printers with firearm blocking technology. This guidance shall include all of the following:
- Performance standards for equipping three-dimensional printers with a certified firearm blueprint detection algorithm and where to find updated lists of certified firearm blueprint detection algorithms published by the department.
- Performance standards for equipping three-dimensional printers with a certified software controls process and where to find updated lists of certified software controls processes published by the department.
- Performance standards on how to test functionality of the certified firearm blueprint detection algorithm and software controls process to meet a specified degree of reliability in blocking the printing of firearms or illegal firearm parts.
- Establishes that the performance standards described above shall be made publicly available on the internet website of the department or the state agency that prepared the written guidance on performance standards described in this section.
- Requires on or before July 1, 2028, any business that produces or manufactures three-dimensional printers for sale or transfer in California shall submit to the DOJ an attestation form for each make and model of printer they intend to make available for sale or transfer in California.
- States that the self-attestation shall include all of the following information:
- The make and model of the three-dimensional printer.
- Confirmation that the manufacturer has equipped that make and model with a certified firearm blueprint detection algorithm and which certified firearm blueprint detection algorithm from the list published, as specified.
- Confirmation that the manufacturer has equipped that make and model with a certified software controls process and which certified software controls process from the list published.
- Confirmation of testing the functionality of the certified firearm blueprint detection algorithm and software controls process once installed according to performance standards issued by the DOJ, as specified.
- States that if the self-attestation form is incomplete or contains information indicating the make and model of printer identified may not be effectively equipped with firearm blocking technology, the Attorney General has authority to investigate and inspect the submission, including, but not limited to, requesting sample models from the manufacturer to verify the attestation of compliance.
- States that any make and model of three-dimensional printer actively under investigation and inspection shall be identified as having an incomplete attestation on the list, as described.
- Requires on or before July 1, 2028, the DOJ shall begin accepting applications from three-dimensional printer manufacturers for a voluntary verification of their self-attestation, allowing the DOJ to inspect and confirm that a specific make and model of printer complies with the performance standards, as described.
- Provides that if the DOJ verifies a printer make and model is properly equipped with firearm blocking technology, the DOJ shall issue to the manufacturer a written notice of compliance verification for the make and model, which shall constitute compliance with specified laws.
- Establishes that no manufacturer of a printer for which a written notice of compliance verification has been issued shall be subject to defined civil actions. This does not apply to a manufacturer who received notice from the DOJ that the previously verified model contained a firearms blueprint detection algorithm for which certification was revoked pursuant or a software controls process for which certification was revoked, as defined, until the manufacturer updates their model and resubmits the model for an updated compliance verification.
- Requires that on or before September 1, 2028, the DOJ shall publish a list of all the makes and models of three-dimensional printers whose manufacturers have submitted complete self-attestations, any makes and models of three-dimensional printers that have an incomplete attestation on file, any makes and models that have submitted for and received the voluntary compliance verification described, and any makes and models that have a pending submission for voluntary compliance verification, as specified.
- Specifies that the lists shall be updated no less frequently than on a quarterly basis and made accessible on the DOJ’s internet website. Retailers or distributors of three-dimensional printers shall consult the lists posted on the department’s internet website to ensure their inventory for sales in California consists of three-dimensional printers in compliance with this title.
- Provides that it shall be an affirmative defense to any action against a retailer, distributor, importer, wholesaler, or other individual transferor of a three-dimensional printer for an alleged, specified violation that the retailer, distributor, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the DOJ on the published list described, and not designated as having an incomplete attestation.
- States that any business that produces or manufactures three-dimensional printers for sale or transfer in California shall take both of the following steps:
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall equip the three-dimensional printer with certified firearm blocking technology, as described.
- Before any three-dimensional printer is offered, sold, transferred, or distributed to any person or business in California, the manufacturer shall submit a self-attestation of installation of firearm blocking technology to the department, as described.
- States that any business that sells, offers to sell, distributes, or transfers for consideration a three-dimensional printer in California shall consult the list published by the DOJ, as described.
- Provides that it shall be unlawful to sell or transfer for consideration a three-dimensional printer in California that does not meet both of the following requirements:
- The three-dimensional printer shall be equipped with firearm blocking technology.
- The three-dimensional printer shall be listed by the DOJ on the published list specified as having a complete attestation on file, having received a certificate of compliance verification, or having a pending application for a certificate of compliance verification.
- Establishes that this section shall not apply to the following products:
- Printers manufactured for and sold exclusively to a state-licensed firearms manufacturer, as defined.
- Printers manufactured for and sold exclusively to the State of California or law enforcement agencies of the United States for the manufacturing of firearms for law enforcement or military purposes.
- Printers manufactured for and sold exclusively to aerospace, biomedical, automotive, or chemical or mechanical engineering companies or government contractors that are not also sold on the consumer retail market.
- Provides that a civil action may be brought against a person who does either of the following:
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- It shall be an affirmative defense to any action against a retailer, distributor, wholesaler, importer, or other individual transferor of a three-dimensional printer for an alleged violation of this section that the retailer, distributor, wholesaler, importer, or other individual transferor only sold or transferred the three-dimensional printer after verifying that the make and model was listed by the department on the published list described in this section, and not designated as having an incomplete attestation.
- It shall be an affirmative defense to any action for violation of this paragraph that the department issued a written notice of compliance verification for the make and model of printer at issue.
- Knowingly files an attestation containing false information. The filing of a civil action under this section shall not preclude potential criminal prosecution for perjury, as defined.
- Sells, offers to sell, or transfers for consideration a three-dimensional printer in California that is not equipped with firearm blocking technology.
- States that a person who has suffered harm in California as a result of a violation of this section may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek compensatory damages as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- Provides that the Attorney General, a county counsel, or a city attorney may bring an action in a court of competent jurisdiction to establish that a person has violated this section, and may seek a civil penalty not to exceed $25,000 for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law.
- States that a prevailing plaintiff shall be entitled to recover reasonable attorney’s fees and costs.
- States that the remedies provided by this section are cumulative and shall not be construed as restricting any other rights, causes of action, claims, or defenses available under any other law.
- States that the DOJ may promulgate regulations and develop forms and publications necessary to implement this title.
- Provides that it is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a three-dimensional printer with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of a three-dimensional printer identified on the DOJ’s list of three-dimensional printers eligible for sale in California, as described. States that a violation of this section is a misdemeanor and does not preclude prosecution under any other law providing for a greater penalty.
- Defines “department” as the Department of Justice.
- Defines “firearm” as a device, designed to be used as a weapon, from which is expelled through a barrel, a projectile by the force of an explosion or other form of combustion.
- Defines “firearm blocking technology” as hardware, firmware, or other integrated technological measures capable of ensuring a three-dimensional printer will not proceed to any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defines “firearm blueprint detection algorithm” as a software service that evaluates three-dimensional printing files, whether in the form of stereolithography (STL) files or other computer-aided design files or geometric code, to determine if the files can be used to program a three-dimensional printer to produce a firearm or illegal firearm parts, and flag any such files to prevent their use to manufacture a firearm or illegal firearm parts.
- Defines “firearm precursor part” as any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted.
- Defines “firmware design” as integration of a firearms blueprint detection algorithm directly into a three-dimensional printer’s firmware, such that any geometric code received by the printer must be evaluated by the algorithm before the printer will proceed to print, and such that the printer will reject print jobs identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defines “illegal firearm parts” as a firearm precursor part and any part designed and intended for use in converting a semiautomatic weapon into a machine gun, including, but not limited to, a pistol convertor.
- Defines “integrated pre-print software design” as a limitation of a three-dimensional printer’s operation to accept geometric code for printing exclusively from a single slicer or other preprint software, which may be the manufacturer’s proprietary software, and integration of a firearms blueprint detection algorithm into that preprint software, such that any STL file or other computer-aided design file must be evaluated by the algorithm before the software will proceed to produce geometric code, and such that the software will not produce geometric code for files that are identified by the algorithm because they would direct the printer to print firearms or illegal firearm parts.
- Defines “pistol convertor” as any device or instrument that when installed in or attached to the rear of the slide of a semiautomatic pistol, replaces the backplate, and interferes with the trigger mechanism and thereby enables the pistol to shoot automatically more than one shot by a single function of the trigger. A pistol converter includes, but is not limited to, a pistol converter manufactured using a three-dimensional printer, as defined.
- Defines “software controls process” means a system designed to stop a three-dimensional printer from initiating any print job unless the underlying three-dimensional printing file has been evaluated by a firearms blueprints detection algorithm and determined not to be a printing file that would produce a firearm or illegal firearm parts.
- Defines “three-dimensional printer” as a computer-aided manufacturing device capable of producing a three-dimensional object from a three-dimensional digital model through an additive manufacturing process that involves the layering of two-dimensional cross sections formed of a resin or similar material that are fused together to form a three-dimensional object.
EXISTING LAW:
- Authorizes a civil action to be brought against a person who knowingly distributes or causes to be distributed, by any means including the internet, any digital firearm manufacturing code to any other person in this state who is not a federally licensed firearms manufacturer, member of the Armed Forces of the United States or the National Guard, while on duty and acting within the scope and course of employment, or any law enforcement agency or forensic laboratory. (Civ. Code, § 3273.61, subd. (a).)
- Authorizes the Attorney General, county counsel, or city attorney to bring an action in any court of competent jurisdiction to establish that a person has violated specified laws and may seek a civil penalty not to exceed twenty-five thousand dollars ($25,000) for each violation, as well as injunctive relief sufficient to prevent the person and any other defendant from further violating the law. (Civ. Code, § 3273.61, subd. (c)(2).)
- Establishes that a person shall not sell, offer to sell, transfer, advertise, or market a CNC milling machine or three-dimensional printer in a manner that knowingly or recklessly causes another person in this state to engage in prohibited conduct, or in a manner that otherwise knowingly or recklessly aids, abets, promotes, or facilitates prohibited conduct. (Civ. Code, § 3273.62, subd. (a).)
- Provides that there shall be a rebuttable presumption that a person is engaged in defined prohibited conduct if both of the following are true:
- The person offers to sell, advertises, or markets a CNC milling machine or three-dimensional printer in a manner that, under the totality of the circumstances, is targeted at purchasers seeking to manufacture firearms or that otherwise affirmatively promotes the machine or printer’s utility in manufacturing firearms, regardless of whether the machine or printer is otherwise described or classified as having any other capabilities.
- The person sells or transfers the CNC milling machine or three-dimensional printer without verifying that a purchaser or transferee in this state is a federally licensed firearms manufacturer or not otherwise prohibited from purchasing or using the machine or printer to manufacture firearms. (Civ. Code, § 3273.62, subd. (b).)
- States that it is unlawful to knowingly, willfully, or recklessly cause another person to engage in the unlawful manufacture of firearms, or to knowingly, willfully, or recklessly aid, abet, promote, or facilitate the unlawful manufacture of firearms. (Civ. Code, § 3273.625, subd. (a).)
- Defines the “unlawful manufacture of firearms” to include any of the following:
- The manufacture of a firearm by a minor, or by a person who is prohibited from owning or possessing firearms under California law.
- The manufacture of four or more firearms within the state in the same calendar year by an individual who is not licensed to manufacture firearms.
- The manufacture of any firearm using a three-dimensional printer or computer numerical control (CNC) milling machine by an individual who is not licensed to manufacture firearms.
- The manufacture of a firearm by a person who is not a federally licensed firearms manufacturer, for the purpose of selling or transferring ownership of that firearm to another person who is not a federally licensed firearms manufacturer.
- The manufacture of a firearm for the purpose of selling, loaning, or transferring the firearm to another person, with the intent to complete the sale, loan, or transfer without a required background check on the transferee initiated by a licensed firearms dealer.
- The manufacture of defined arms. (Civ. Code, § 3273.625, subd. (b).)
- Defines “firearm accessory” as an attachment or device designed or adapted to be inserted into, affixed onto, or used in conjunction with a firearm that is designed, intended, or functions to increase a firearm’s rate of fire or to increase the speed at which a person may reload a firearm or replace the magazine, or any other attachment or device described that may render a firearm an assault weapon when inserted into, affixed onto, or used in conjunction with a firearm. The term firearm accessory also includes any other device, tool, kit, part, or parts set that is clearly designed and intended for use in manufacturing firearms. (Civ. Code, § 3273.50, subd. (c).)
- Defines “firearm-related product” as a firearm, ammunition, a firearm precursor part, a firearm component, firearm manufacturing machine, and a firearm accessory that meets any of the following conditions:
- The item is sold, made, or distributed in California.
- The item is intended to be sold or distributed in California.
- The item is or was possessed in California and it was reasonably foreseeable that the item would be possessed in California. (Civ. Code, § 3273.50, subd. (d).)
- Defines “firearm manufacturing machine” as a three-dimensional printer, as defined, a computer numerical control (CNC) milling machine, or a similar machine, that is marketed or sold as or is reasonably designed or intended to be used to manufacture or produce firearms, firearm components, or firearm accessories. (Civ. Code, § 372.50, subd. (g).)
- Defines “digital firearm manufacturing code” as any digital instructions in the form of computer-aided design files, computer-aided manufacturing files, or other code or instructions stored and displayed in electronic format as a digital model that may be used to program a CNC milling machine, a three-dimensional printer, or a similar machine, to manufacture or produce any of the following:
- A firearm, including a completed frame or receiver or a firearm precursor part.
- A large-capacity magazine.
- A large-capacity magazine conversion kit.
- A machinegun.
- A multiburst trigger activator.
- A silencer.
- A firearm accessory.
- A firearm barrel. (Civ. Code, § 3273.60, subd. (a).)
- Defines “federally licensed firearms manufacturer” as a person, firm, corporation, or other entity that holds a valid license to manufacture firearms issued pursuant to defined federal law and regulations. (Civ. Code, § 3273.60, subd. (b).)
FISCAL EFFECT:
Unknown
COMMENTS:
- Author's Statement: According to the author, “California has set a standard for the country in creating commonsense gun regulations and gun violence prevention work. AB 2047 continues this work by requiring that all three-dimensional printers sold in California are equipped with firearm blocking features to prohibit the printing of dangerous gun parts. Specifically, it requires that they have a firearm detection algorithm and software controls that identifies files that would produce guns and illegal gun parts and block such printing requests.
“There is alarming data showing that 3D-printed firearms have become an escalating public safety threat. A report from Everytown for Gun Safety shows that recoveries of 3D-printed guns increased by 1,000 percent between 2020 and 2024. Just last month, Santa Rosa police seized three 3D printers along with 167 firearms- including 150 guns with obliterated serial numbers- in an illegal ghost gun manufacturing operation that left weapons easily accessible to a young child.
“As technology evolves, it’s important that consumer protections change with it to ensure the safety of our communities.”
- Effect of the Bill: AB 2047 is a comprehensive bill that intends to slow or proscribe the proliferation of firearms software used with three-dimensional printers (3DP) to produce unserialized firearms, otherwise known as ghost guns.
This bill would require various actions by the DOJ, or another designated agency, to address the spread and use of firearms software. AB 2047 would require, among other things, DOJ or another agency to: 1) engage in an investigation of known firearm blueprint design files and existing firearm blueprint detection algorithms, 2) publish written guidance on performance standards for persons or entities engaged in the creation of firearm blueprint detection algorithms to be certified for use by 3DP manufacturers, 3) prepare written guidance on performance standards to accept applications for certification of firearms blueprint detection algorithms and begin issuing certifications of algorithms that meet or exceed defined performance standards, and 4) publish written guidance on how to 3DP’s with firearm blocking technology.
AB 2047 also requires: 1) any business that produces or manufactures 3DP’s for sale or transfer in California to submit to DOJ an attestation for each make and model of printer they intend to make available for sale or transfer in California, 2) DOJ to publish a list of all the makes and models of 3DP’s whose manufacturers have submitted complete self-attestations, and 3) prohibitions on the sale or transfer of 3DP’s that are not equipped with firearm blocking technology, except as specified. This bill would also make it a misdemeanor to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a 3DP with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of 3DP’s identified on DOJ’s list of 3DP’s eligible for sale in California.
There is a possible, minor drafting concern with how this provision is constructed the author may wish to consider reworking. Section 29187(a) of the bill reads, “It is unlawful to knowingly disable, deactivate, uninstall, or otherwise circumvent any firearm blocking technology installed in a [3DP] with intent to manufacture firearms or to distribute, sell, or transfer for consideration in California one or more modified versions of a [3DP] . . . .” It is unclear whether the state of mind word, “knowingly,” is intended to apply to the prohibited conduct after the word “or.” The prohibited conduct after “or” is “distribute, sell, or transfer for consideration in California one or more modified versions of a 3DP[.]” Due to the way this section is constructed it is unclear whether “knowingly” would apply to, for example, distribution of an unlawfully modified 3DP in California. Additionally, the lack of parallel language that reads, “with the intent to manufacture firearms” after the “or” could similarly lead to unintentional applications of the statute. Without requiring a person to “knowingly” distribute, sell, or transfer a modified 3DP, combined with the lack of matching language stating, “with the intent to manufacture firearms,” an individual who intentionally or knowingly disabled firearm blocking technology to print ghost guns would be subject to the same penalty as a person who unknowingly transferred a modified 3DP to a recycler willing to pay for an old 3D printer to scrap it for sellable parts.
Additionally, public safety concerns have quickly developed as the manufacture of untraceable firearms has moved beyond professionally licensed manufacturers and responsible, law-abiding hobbyists into the production of ghost guns for use in crime. The ongoing battle to reduce or eliminate ghost guns has proven difficult. A recent report found a dramatic increase in ghost guns recovered in recent years.[1] The report noted that from 2019-2021, there was a 592% increase in the number of ghost guns recovered as a result of criminal activity, which represented 70% of the entire increase in guns recovered during the same period.[2] From 2021-23, however, there was a 23% decrease in ghost gun recoveries.[3] The reduction in ghost gun recoveries accounted for 73% of the overall reduction in crime guns recovered from 2021-23.[4] While this could be an early sign of regulatory efficacy, a concerning number of ghost guns continue showing up in crime.[5]
By placing additional regulations around 3DP and firearms software manufacturers, AB 2047 could help continue the progress California has made in reducing the incidence of ghost guns used in crime.
- The Bruen Analysis: AB 2047 may interfere with some protected Second Amendment conduct, though the current constitutional test suggests a Second Amendment violation is unlikely with this bill.
To be subject to Second Amendment scrutiny, a law must first infringe on plain text Second Amendment conduct. (New York State Rifle & Pistol Association, Inc. v. Bruen, (2022) 597 U.S. 1, 17.) Justifying a law or regulation that purports to place restrictions on protected Second Amendment conduct requires the government to demonstrate the law is “consistent with the nation’s historical tradition of firearms regulation.” (Id. at p. 24.) A firearms regulation is constitutional if the government establishes the proposed law is “relevantly similar” to historical laws, regulations, and traditions. (Id. at p. 29.)
AB 2047 arguably does not infringe on plain text Second Amendment conduct. The Court has provided meaningful room to continue regulating the commercial sale of arms since Heller. (See, e.g., District of Columbia v. Heller (2008) 554 U.S. 626-27, McDonald v. City of Chicago (2010) 561 U.S. 742, 787.) This bill seems to be primarily aimed at regulating commercial conduct. AB 2047 makes room for an individual to be charged with a misdemeanor for deactivating firearm blocking software, but this course of conduct must be evaluated using the plain text of the Second Amendment and it seems strained to suggest that an individual has a plain text constitutional right to possess software to use with 3DP’s. Even if we assume, as many courts have done in cases involving a Second Amendment challenge that an individual has a plain text Second Amendment right to possess software to manufacture firearms, and that right is impacted by AB 2047, it seems unlikely a law prohibiting only one means of unlicensed firearms manufacture would be struck down under Bruen.
American history does not appear to have much to offer in the way of ghost guns. One of the reasons for this could be the process for manufacturing and acquiring ghost guns significantly differs from processes used historically to manufacture and acquire firearms.[6] The firearms manufacturing process can be analogized in principle, but there is no clear indication that the Second Amendment encompasses an individual right to manufacture firearms. It is also not clear from the case law whether courts would consider 3DP manufactured firearms as sufficiently analogous to the dangerous or unusual weapons prohibited during the key historical timeframes, particularly when personal historical self-manufacture was not necessarily uncommon.[7] The greater prevalence of unregulated manufacture likely will produce less reliable firearms, which may prove unconstitutionally dangerous. Ultimately, the nexus between the software prohibitions and 3DP manufacturer restrictions relative to individual Second Amendment rights may be too attenuated to implicate the Second Amendment.
The Court to this point appears not to have found Second Amendment concerns with regulating ghost guns. AB 2047 only indirectly touches ghost guns, instead focusing much of its regulatory aim at software. Given the above, it appears unlikely AB 2047 draws fatal Second Amendment scrutiny.
- The Dormant Commerce Clause: This bill would impact certain out-of-state businesses by establishing requirements for 3DP manufacturers and sellers of certain 3DP software. Because this would create a disadvantage for certain out-of-state commerce, the bill’s constitutionality under the Constitution’s Commerce Clause may be an issue.
The dormant Commerce Clause is a constitutional rule read into the Commerce Clause. The Supreme Court has interpreted the Commerce Clause to infer a constitutional rule that state laws putting unreasonable restrictions on interstate commerce, even in areas where Congress has not regulated, are unconstitutional. (Nat’l Pork Producers Council v. Ross (2023) 598 U.S. 356, 357.) It is possible for a state law to discriminate against interstate commerce “either on its face or in practical effect.” (Maine v. Taylor (1986) 477 U.S. 131, 138.) If a showing is made that the law discriminates against interstate commerce, the proponents must demonstrate that the statute serves a legitimate local purpose and that purpose cannot be equally served by available nondiscriminatory means. (Ibid.)
On its face, it is unclear whether AB 2047 unconstitutionally discriminates against interstate commerce. The purpose of the bill is to enhance public safety for Californians by placing prohibitions on firearms software for 3DP’s. The author expects this will enhance public safety by reducing the proliferation of ghost guns, which could then reduce the number of those guns used in crimes. AB 2047 would produce some amount of discrimination against interstate commerce because out-of-state retailers of 3DP’s and firearms software no longer would be able to sell those products to California consumers. Whether this law rises to the level of an “undue” burden, however, is debatable, since the law provides a remedy for 3DP manufacturers to sell to Californians by installing and attesting to their products being incapable of operating the prohibited software.
The key questions here may then be whether AB 2047’s purpose is legitimate, and if that purpose otherwise can be accomplished by available, nondiscriminatory means. The nature and legitimacy of the bill appear sound. Public safety concerns are a widely accepted and foundational purpose for state regulation. Ghost guns are a documented public safety concern. Whether there are available, nondiscriminatory means to achieve this objective likely presents the greatest constitutional concern for this bill under the dormant Commerce Clause. Certainly, California can and does regulate numerous acts related to ghost guns and while we have seen some improvement in reduced recovery rates of ghost guns in crime, the issue stubbornly persists in communities across the State. While a dormant Commerce Clause concern is possible, it seems unlikely to be fatal to the bill.
- Argument in Support: According to Brady United Against Gun Violence, “The Firearm Printing Prevention Act, which will combat the emerging crisis of 3D printed firearms by requiring that every 3D printer sold in our state comes with technology that will block 3D print jobs for firearms and illegal firearm parts that turn pistols into machine guns (machinegun-conversion devices, commonly called “switches” or “MCDs”).
“Rapid evolution in the printing industry in recent years has radically increased the threat from 3D printed firearms. Over the past decade, 3D printers have improved in capabilities, dropped in price, and exploded in popularity. Entry-level models now cost as little as $250 and are capable of printing the critical components of firearms. Anyone with internet access can find thousands of digital instructional files for guns and illegal gun parts online.
“California’s status as the state with the strongest gun laws makes 3D printing all the more appealing for people prohibited from owning firearms. In 2025, domestic abusers, teenagers, and large-scale criminal suppliers were found manufacturing 3D-printed firearms in California. Just in February 2026:
- Law enforcement in Santa Rosa seized over 165 guns and 3D printers from a 22-year-old ghost guns manufacturer.
- Victor Valley sheriffs arrested two men with a 3D-printed assault rifle, over 130 Polymer80 jigs (ghost gun making tools), 3D printer materials and a 3D printing guide for different firearms.
- A San Jose teen was caught with 27 finished or near-finished 3D-printed firearms, including DIY machine guns, and two 3D printers.
“3D-printed firearms undermine our state’s entire gun safety apparatus. Skip-the-background-check gun printing upends the entire system of gun safety laws - circumventing California’s laws that seek to ensure guns don’t end up in the hands of people with dangerous histories and that extremely dangerous weapons don’t end up in our state.
“The good news is: the technology already exists to equip printers to identify and block these dangerous print jobs—this new legislation will simply ensure that printer manufacturers actually deploy these solutions and stop the spread of DIY firearms before it accelerates any further. The Firearm Printing Prevention Act is an upstream solution that builds on California’s legacy of combating emerging firearm threats, like the first wave of ghost guns and DIY machine guns.
“California has taken early steps to prohibit personal manufacturing of firearms with a 3D printer and created pathways to civil liability for people who aid and abet illegal 3D firearm manufacturing. While those recent laws have focused on prohibition and deterrence, AB 2047 provides an opportunity for prevention using new technology to stop 3D gun printing at its source. We can’t fully address this emerging threat to our foundational gun laws and public safety without this intervention at the manufacturing stage.
“We can help prevent illegal guns flowing into California communities and thwart gun traffickers trying to flout California’s strong gun safety laws by ensuring that all 3D printers sold on the California household consumer retail market have firearm printing blocking technology installed. For these reasons, we strongly support AB 2047 and we urge the legislature to stand with us in combatting the emerging threat of 3D-printed firearms.”
- Argument in Opposition: According to the National Rifle Association Institute for Legislative Action, “On the outset, the NRA has consistently opposed efforts to ban or restrict the use of 3D printing technology as it relates to the lawful exercise of the right to keep and bear arms. AB 2047 represents a significant expansion of such efforts, establishing an unprecedented regulatory regime that conditions the sale and use of 3D printers on state-approved software designed to detect and block firearm-related digital files.
“As a matter of policy, this approach raises significant constitutional and practical concerns. The bill implicates the Second Amendment by placing prospective restrictions on self-manufacture of firearms. By conditioning access to commonly available tools on government-imposed technology, the bill further burdens and prohibits the ability of law-abiding individuals to exercise a constitutional right.
“AB 2047 also raises serious First Amendment concerns. By mandating the use of state-approved filtering mechanisms to monitor and restrict digital files and code, the bill extends regulation into areas of protected expression. Requiring manufacturers to embed such controls, and penalizing their circumvention, introduces a government directed role in regulating the dissemination and use of information.
“In addition, the bill’s reliance on evolving detection standards, that are not required to achieve complete accuracy, creates a substantial risk of overbreadth, potentially restricting lawful and unrelated digital content. At the same time, individuals’ intent on unlawful activity remain unlikely to be deterred by software-based restrictions that can be modified or circumvented.
“For those reasons, we respectably encourage that the Committee reject Assembly Bill 2047.”
- Related Legislation:
- AB 1589 (Chen) would exempt from the prohibition on possessing silencers specified level I reserve peace officers. AB 1589 is pending hearing in the Assembly Appropriations Committee.
- AB 1615 (Nguyen) would authorize a peace officer employed by a county probation department and using an unsafe handgun as a service weapon to satisfy the above-described training requirement by completion of the firearm portion of a training course prescribed by POST and who qualifies with the handgun, as specified, at least every 3 months. AB 1615 is pending hearing in the Assembly Appropriations Committee.
- SB 1220 (Hurtado) would prohibit a person who is convicted on or after January 1, 2027, of defined laws, from owning, purchasing, receiving, or having in their possession or under their custody or control any firearm within 10 years of the conviction. SB 1220 is pending hearing in the Senate Public Safety Committee.
- Prior Legislation:
- AB 1127 (Gabriel), Chapter 572, Statutes of 2025, prohibited a licensed firearms dealer from selling, offer for sale, exchange, give, transfer, or deliver any semiautomatic convertible pistol, except as specified.
- AB 1263 (Gipson), Chapter 636, Statutes of 2025, prohibited a person from knowingly or willfully causing another person to engage in the unlawful manufacture of firearms or knowingly or willfully aiding, abetting, prompting, or facilitating the unlawful manufacture of firearms, including the manufacture of assault weapons or .50 BMG rifles or the manufacture of any firearm using a 3DP printer or CNC milling machine, as specified.
- AB 97 (Rodriguez), Chapter 233, Statutes of 2023, required the DOJ to collect and report specified information, including, among other things, the number and disposition of arrests made for violations of manufacturing a firearm or assembling a firearm from unserialized components.
- AB 1089 (Gipson), Chapter 243, Statutes of 2023, required anybody who uses a 3DP or CNC milling machine to manufacture a firearm to be a state-licensed manufacturer.
- AB 1420 (Berman), Chapter 245, Statutes of 2023, authorized the DOJ to conduct inspections and assess a fine for any violation of provisions relating to regulation of those licenses, for violations of specified provisions regulating the sale of secondhand firearms.
- AB 1594 (Ting), Chapter 98, Statutes of 2022, prohibited a firearm industry member from manufacturing, marketing, importing, offering for wholesale sale, or offering for retail sale a firearm-related product that is abnormally dangerous and likely to create an unreasonable risk of harm to public health and safety in California
- AB 1621 (Gipson), Chapter 76, Statutes of 2022, redefined a firearm precursor part as any forging, casting, printing, extrusion, machined body or similar article that has reached a stage in manufacture where it may readily be completed, assembled or converted to be used as the frame or receiver of a functional firearm, or that is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted.
- AB 2156 (Wicks), Chapter 142, Statutes of 2022, expanded the firearms manufacturing prohibition to prohibit any person, regardless of federal licensure, from manufacturing firearms in the state without being licensed by the state.
REGISTERED SUPPORT / OPPOSITION:
Support
Everytown for Gun Safety Action Fund (Sponsor)
Moms Demand Action for Gun Sense in America (Sponsor)
Students Demand Action for Gun Sense in America (Sponsor)
Beverly Hills High School Students Demand Action
Brady California
Brady Campaign
CA Moms Demand Action
California Moms Demand Action
California Police Chiefs Association
Cft – a Union of Educators & Classified Professionals, Aft, Afl-cio
Chapman University Students Demand Action
Consumer Protection Policy Center/usd School of Law
Former City Attorney Mike Feuer, City of Los Angeles
Giffords
Newtown Action Alliance
San Diego City Attorney's Office
Students Demand Action At UC Davis
Ucla Students Demand Action
Youth Alive!
57 Private Individuals
Oppose
ACLU California Action
California Rifle and Pistol Association, INC.
Gun Owners of California, INC.
National Rifle Association - Institute for Legislative Action
4 Private Individuals
Analysis Prepared by:
California’s Fight Against the Ghost Gun Crisis: Progress and New Challenges, California Department of Justice (Oct. 2024) <https://oag.ca.gov/system/files/media/ogvp-report-ghost-guns.pdf> [as of Mar. 18, 2026]. ↑
Ibid. ↑
Ibid. ↑
Ibid. ↑
Ibid. ↑
Kopel & Greenlee, The History on Bans of Types of Arms Before 1900 (2024) University of Denver Journal of Legislation <https://scholarship.law.nd.edu/jleg/vol50/iss2/3/> [as of Mar. 18, 2026]. ↑
Greenlee, J. The American Tradition of Self-Made Arms (2023) 54 St. Mary’s University Law Journal <https://commons.stmarytx.edu/cgi/viewcontent.cgi?article=2119&context=thestmaryslawjournal> [as of Mar. 16, 2026]. ↑
Discussed in Hearing
Senate Floor
Assembly Floor
Senate Standing Committee on Appropriations
Senate Standing Committee on Public Safety
Senate Standing Committee on Judiciary
Assembly Floor
Assembly Standing Committee on Judiciary
Assembly Standing Committee on Public Safety
Bill Author
Bill Co-Author(s):