AB 584: Firearms dealers and manufacturers: secure facilities.
- Session Year: 2025-2026
- House: Assembly
- Latest Version Date: 2025-07-14
Current Status:
Passed
(2025-07-14: Chaptered by Secretary of State - Chapter 40, Statutes of 2025.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Existing law defines a secure facility, for purposes of requirements for firearms dealers to store firearms when the dealer is not open for business, as a building that, among other requirements, has perimeter doorways with specified characteristics, including that the doorway is a windowless or windowed steel security door equipped with both a dead bolt and a doorknob lock, as specified, or a metal grate that is padlocked and affixed to the licensees premises, as specified. Existing law defines a secure facility, for purposes of requirements for firearms manufacturers to store manufactured firearms and barrels, as a facility that has perimeter doorways with additional specified characteristics, including that the doorway has hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door or that are installed so that they cannot be removed when the doors are closed and locked.
Under existing law, failure to comply with these requirements is grounds for the forfeiture or revocation of a license or the imposition of a civil fine, as specified.
This bill would expand the definition of a secure facility for the entities described above to allow a doorway with a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door, as specified.
Existing law defines a secure facility, for purposes of requirements for firearms dealers to store firearms when the dealer is not open for business, as a building that, among other requirements, has perimeter doorways with specified characteristics, including that the doorway is a windowless or windowed steel security door equipped with both a dead bolt and a doorknob lock, as specified, or a metal grate that is padlocked and affixed to the licensees premises, as specified. Existing law defines a secure facility, for purposes of requirements for firearms manufacturers to store manufactured firearms and barrels, as a facility that has perimeter doorways with additional specified characteristics, including that the doorway has hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door or that are installed so that they cannot be removed when the doors are closed and locked.
Under existing law, failure to comply with these requirements is grounds for the forfeiture or revocation of a license or the imposition of a civil fine, as specified.
This bill would expand the definition of a secure facility for the entities described above to allow a doorway with a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door, as specified.
Existing law defines a secure facility, for purposes of requirements for firearms dealers to store firearms when the dealer is not open for business, as a building that, among other requirements, has perimeter doorways with specified characteristics, including that the doorway is a windowless or windowed steel security door equipped with both a dead bolt and a doorknob lock, as specified, or a metal grate that is padlocked and affixed to the licensees premises, as specified. Existing law defines a secure facility, for purposes of requirements for firearms manufacturers to store manufactured firearms and barrels, as a facility that has perimeter doorways with additional specified characteristics, including that the doorway has hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door or that are installed so that they cannot be removed when the doors are closed and locked.
Under existing law, failure to comply with these requirements is grounds for the forfeiture or revocation of a license or the imposition of a civil fine, as specified.
This bill would expand the definition of a secure facility for the entities described above to allow a doorway with a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door, as specified.
Existing law defines a secure facility, for purposes of requirements for firearms dealers to store firearms when the dealer is not open for business, as a building that, among other requirements, has perimeter doorways with specified characteristics, including that the doorway is a windowless or windowed steel security door equipped with both a dead bolt and a doorknob lock, as specified, or a metal grate that is padlocked and affixed to the licensees premises, as specified. Existing law defines a secure facility, for purposes of requirements for firearms manufacturers to store manufactured firearms and barrels, as a facility that has perimeter doorways with additional specified characteristics, including that the doorway has hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door or that are installed so that they cannot be removed when the doors are closed and locked.
Under existing law, failure to comply with these requirements is grounds for the forfeiture or revocation of a license or the imposition of a civil fine, as specified.
This bill would expand the definition of a secure facility for the entities described above to allow a doorway with a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door, as specified.
As used in Section 26890, secure facility means a building that meets all of the following specifications:
(a)All perimeter doorways shall meet one of the following:
(1)A windowless steel security door equipped with both a dead bolt and a doorknob lock.
(2)A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(b)All windows are covered with steel bars.
(c)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(d)Any metal grates have spaces no larger than six inches wide measured in any direction.
(e)Any metal screens have spaces no larger than three inches wide measured in any direction.
(f)All steel bars shall be no further than six inches apart.
SEC. 2.Section 29141 of the Penal Code is amended to read:29141.Except as otherwise provided in Section 29142, as used in this chapter, secure facility means that the facility satisfies all of the following:
(a)The facility is equipped with a burglar alarm with central monitoring.
(b)All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
(c)All perimeter doorways are designed in one of the following ways:
(1)A windowless steel security door equipped with both a deadbolt and a doorknob lock.
(2)A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
(5)Hinges and hasps installed on doors so that they cannot be removed when the doors are closed and locked.
(6)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(d)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(e)No perimeter metal grates are capable of being entered by any person.
(f)Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
(g)Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
(h)Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
(i)Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
As used in Section 26890, secure facility means a building that meets all of the following specifications:
(a)All perimeter doorways shall meet one of the following:
(1)A windowless steel security door equipped with both a dead bolt and a doorknob lock.
(2)A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(b)All windows are covered with steel bars.
(c)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(d)Any metal grates have spaces no larger than six inches wide measured in any direction.
(e)Any metal screens have spaces no larger than three inches wide measured in any direction.
(f)All steel bars shall be no further than six inches apart.
SEC. 2.Section 29141 of the Penal Code is amended to read:29141.Except as otherwise provided in Section 29142, as used in this chapter, secure facility means that the facility satisfies all of the following:
(a)The facility is equipped with a burglar alarm with central monitoring.
(b)All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
(c)All perimeter doorways are designed in one of the following ways:
(1)A windowless steel security door equipped with both a deadbolt and a doorknob lock.
(2)A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
(5)Hinges and hasps installed on doors so that they cannot be removed when the doors are closed and locked.
(6)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(d)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(e)No perimeter metal grates are capable of being entered by any person.
(f)Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
(g)Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
(h)Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
(i)Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
As used in Section 26890, secure facility means a building that meets all of the following specifications:
(a)All perimeter doorways shall meet one of the following:
(1)A windowless steel security door equipped with both a dead bolt and a doorknob lock.
(2)A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall not have exterior hardware that can be used to open the door and shall have protective covers over any external hinges.(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(b)All windows are covered with steel bars.
(c)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(d)Any metal grates have spaces no larger than six inches wide measured in any direction.
(e)Any metal screens have spaces no larger than three inches wide measured in any direction.
(f)All steel bars shall be no further than six inches apart.
SEC. 2.Section 29141 of the Penal Code is amended to read:29141.Except as otherwise provided in Section 29142, as used in this chapter, secure facility means that the facility satisfies all of the following:
(a)The facility is equipped with a burglar alarm with central monitoring.
(b)All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
(c)All perimeter doorways are designed in one of the following ways:
(1)A windowless steel security door equipped with both a deadbolt and a doorknob lock.
(2)A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
(5)Hinges and hasps installed on doors so that they cannot be removed when the doors are closed and locked.
(6)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall not have exterior hardware that can be used to open the door and shall have protective covers over any external hinges.(B)The door shall have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(d)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(e)No perimeter metal grates are capable of being entered by any person.
(f)Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
(g)Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
(h)Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
(i)Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
As used in Section 26890, secure facility means a building that meets all of the following specifications:
(a)All perimeter doorways shall meet one of the following:
(1)A windowless steel security door equipped with both a dead bolt and a doorknob lock.
(2)A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall not have exterior hardware that can be used to open the door and shall have protective covers over any external hinges.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(b)All windows are covered with steel bars.
(c)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(d)Any metal grates have spaces no larger than six inches wide measured in any direction.
(e)Any metal screens have spaces no larger than three inches wide measured in any direction.
(f)All steel bars shall be no further than six inches apart.
SEC. 2.Section 29141 of the Penal Code is amended to read:29141.Except as otherwise provided in Section 29142, as used in this chapter, secure facility means that the facility satisfies all of the following:
(a)The facility is equipped with a burglar alarm with central monitoring.
(b)All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
(c)All perimeter doorways are designed in one of the following ways:
(1)A windowless steel security door equipped with both a deadbolt and a doorknob lock.
(2)A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(3)A metal grate that is padlocked and affixed to the licensees premises independent of the door and doorframe.
(4)Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
(5)Hinges and hasps installed on doors so that they cannot be removed when the doors are closed and locked.
(6)(A)A windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
(B)The door shall not have exterior hardware that can be used to open the door and shall have protective covers over any external hinges.
(C)If the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
(d)Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
(e)No perimeter metal grates are capable of being entered by any person.
(f)Steel bars used to satisfy the requirements of this section are not capable of being entered by any person.
(g)Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
(h)Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
(i)Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe.
|
Date
|
Status
|
|---|---|
| Jul 14, 2025 | Chaptered by Secretary of State - Chapter 40, Statutes of 2025. |
| Jul 14, 2025 | Approved by the Governor. |
| Jul 3, 2025 | Enrolled and presented to the Governor at 11 a.m. |
| Jun 27, 2025 | In Assembly. Ordered to Engrossing and Enrolling. |
| Jun 27, 2025 | Read third time. Passed. Ordered to the Assembly. (Ayes 38. Noes 0. Page 1809.). |
| Jun 24, 2025 | Read second time. Ordered to Consent Calendar. |
| Jun 23, 2025 | From committee: Be ordered to second reading file pursuant to Senate Rule 28.8 and ordered to Consent Calendar. |
| Jun 10, 2025 | From committee: Do pass and re-refer to Com. on APPR. with recommendation: To Consent Calendar. (Ayes 6. Noes 0.) (June 10). Re-referred to Com. on APPR. |
| May 7, 2025 | Referred to Com. on PUB. S. |
| Apr 24, 2025 | In Senate. Read first time. To Com. on RLS. for assignment. |
| Apr 24, 2025 | Read third time. Passed. Ordered to the Senate. (Ayes 75. Noes 0. Page 1279.) |
| Apr 10, 2025 | Read second time. Ordered to Consent Calendar. |
| Apr 9, 2025 | From committee: Do pass. To Consent Calendar. (Ayes 14. Noes 0.) (April 9). |
| Mar 26, 2025 | From committee: Do pass and re-refer to Com. on APPR. with recommendation: To Consent Calendar. (Ayes 9. Noes 0.) (March 25). Re-referred to Com. on APPR. |
| Mar 13, 2025 | Re-referred to Com. on PUB. S. |
| Mar 12, 2025 | From committee chair, with author's amendments: Amend, and re-refer to Com. on PUB. S. Read second time and amended. |
| Feb 24, 2025 | Referred to Com. on PUB. S. |
| Feb 13, 2025 | From printer. May be heard in committee March 15. |
| Feb 12, 2025 | Read first time. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Jun 27, 2025 | Consent Calendar 2nd AB584 Hadwick | Senate Floor |
Passed |
|
| Jun 10, 2025 | Do pass, but first be re-referred to the Committee on [Appropriations] with the recommendation: To Consent Calendar | Senate Standing Committee on Public Safety |
Passed |
|
| Apr 24, 2025 | AB 584 Hadwick Consent Calendar Second Day Regular Session | Assembly Floor |
Passed |
|
| Apr 9, 2025 | Do pass. To Consent Calendar. | Assembly Standing Committee on Appropriations |
Passed |
|
| Mar 25, 2025 | Do pass and be re-referred to the Committee on [Appropriations] with recommendation: To Consent Calendar | Assembly Standing Committee on Public Safety |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| California Rifle and Pistol Association | ** Support |
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | AB 584 |
CONSENT
Bill No: AB 584
Author: Hadwick (R)
Amended: 3/12/25 in Assembly
Vote: 21
SENATE PUBLIC SAFETY COMMITTEE: 6-0, 6/10/25
AYES: Arreguín, Seyarto, Caballero, Cortese, Pérez, Wiener
SENATE APPROPRIATIONS COMMITTEE: Senate Rule 28.8
ASSEMBLY FLOOR: 75-0, 4/24/25 (Consent) - See last page for vote
SUBJECT: Firearms dealers and manufacturers: secure facilities
SOURCE: California Rifle and Pistol Association
DIGEST:
This bill provides licensed firearm dealers with an additional installation option for meeting “secure facility” requirements related to perimeter doors.
ANALYSIS:
Existing law:
- Generally prohibits the sale, lease or transfer of firearms unless the transaction is completed through a dealer licensed by the Department of Justice (DOJ), and establishes various exceptions to this prohibition. (Penal (Pen.) Code, §§ 26500 – 26625)
- Requires firearms licensees to meet various specified requirements prior to obtaining their dealer license, as provided. (Pen. Code, § 26700.)
- Requires DOJ to keep a centralized list of all persons licensed to sell, lease or transfer firearms at retail. (Pen. Code, § 26715, subd. (a).)
- Provides that a license to sell firearms is subject to forfeiture for any violation of a number of specified prohibitions and requirements, with limited exceptions. (Pen. Code, § 26800(a).)
- Requires the DOJ to conduct inspections of all firearms dealers at least once every three years, except as specified, to ensure compliance with certain specified statutes and any other applicable state law, and authorizes DOJ to assess an annual fee not to exceed $115 to cover the cost of maintaining the centralized list of licensees. (Pen. Code, § 26720, subd. (a)(1).)
- Provides that at any time when the licensee is not open for business, all inventory firearms shall be stored in the licensed location and using one of various specified methods as to each particular firearm. (Pen. Code, § 26890.)
- Provides that for the purposes of regulating firearms dealers, “secure facility” means that the facility satisfies all of the following:
- All perimeter doorways shall meet one of the following:
- A windowless steel security door equipped with both a dead bolt and a doorknob lock.
- A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.
- All windows are covered with steel bars.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- Any metal grates have spaces no larger than six inches wide measured in any direction.
- Any metal screens have spaces no larger than three inches wide measured in any direction.
- All steel bars shall be no further than six inches apart. (Pen. Code, § 17110.)
- All perimeter doorways shall meet one of the following:
- Provides that for the purposes of specified provisions related to firearm manufacturers, “secure facility” means that the facility satisfies all of the following:
- The facility is equipped with a burglar alarm with central monitoring.
- All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
- All perimeter doorways are designed in one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock.
- A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.
- Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
- Hinges and hasps installed so that they cannot be removed when the doors are closed and locked.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- No perimeter metal grates are capable of being entered by any person.
- Steel bars that are not capable of being entered by any person.
- Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
- Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
- Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe. (Pen. Code, § 29141.)
This bill:
- Provides that, for the purposes of the definition of “secure facility” that applies to both licensed firearm dealers and certain firearm manufacturers, a “perimeter doorway” may include a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
- States that the windowed or windowless steel door specified above must have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
- Specifies that if the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
Comments
Existing California law includes several explicit security requirements for licensed firearm dealers, including a general requirement that all firearms in the inventory of a licensee be kept at the dealer’s licensed location. Additionally, existing law requires that any time when the licensee is not open for business, all inventory firearms must be stored in the licensed location, and all firearms must be secured using one of the following methods: storage in a “secure facility” that is part of or constitutes the licensee’s business premises, secured by a hardened steel rod or cable, as specified, or stored in a locked fireproof safe or vault on the licensee’s business premises. Licensed firearm manufacturers are subject to a related requirement that they store all manufactured firearms and firearm barrels in a secure facility.
With regard to licensed firearm dealers that elect to store their firearms in a “secured facility” as opposed to one of the other options, existing law sets forth certain specifications that such a facility must meet in order to comply with the requirement. For instance, windows must be covered with steel bars, HVAC system and service openings must be secured with steel bars, metal grating or an alarm system, and all metal grates, screens and bars must meet specific requirements. Further, all perimeter doorways must meet one of three criteria: a windowless steel security door equipped with a dead bolt and doorknob lock, a windowed metal door with similar locking mechanisms and bars or grating over the window if it has an opening greater than 5 inches, or a metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.
The Author argues that “FFLs must comply with the California Penal Code’s definition of a ‘secure facility’ as a condition for a license to sell, lease, or transfer firearms at retail locations in the state of California, [but] this code section has not been updated in more than 25 years. […] FFLs must also comply with the California Fire Code which requires exit doors for commercial buildings to be opened without tight grasping, tight pinching or twisting of the wrist (CA Fire Code Part 3, Chapter 10, 1010.2.2). The combination of both these requirements puts FFLs in the impossible position of complying with one requirement or the other, facing penalties up to license revocation and fines from the California Office of the Attorney General for the former or facing penalties from a Fire Marshall for the latter.”
Seeking to address this conflict, this bill provides licensed firearm dealers and manufacturers with an additional installation option for a perimeter door at their business location that complies with the definition of “secure facility.” Specifically, this bill permits licensees to install a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door. If a licensee elects to install such a door, it must have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting, and if the door is windowed and the window has an opening of more than five inches in any direction, the window must be covered with steel bars or metal grating, as specified.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: No
SUPPORT: (Verified 6/23/25)
California Rifle and Pistol Association (source)
OPPOSITION: (Verified 6/23/25)
None received
ASSEMBLY FLOOR: 75-0, 4/24/25
AYES: Addis, Aguiar-Curry, Ahrens, Alanis, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Bennett, Berman, Boerner, Bonta, Bryan, Calderon, Caloza, Carrillo, Castillo, Connolly, Davies, DeMaio, Dixon, Elhawary, Ellis, Flora, Fong, Gabriel, Garcia, Gipson, Jeff Gonzalez, Mark González, Hadwick, Haney, Hart, Hoover, Irwin, Jackson, Kalra, Krell, Lee, Lowenthal, Macedo, McKinnor, Muratsuchi, Nguyen, Ortega, Pacheco, Papan, Patel, Patterson, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Celeste Rodriguez, Michelle Rodriguez, Rogers, Blanca Rubio, Sanchez, Schiavo, Schultz, Sharp-Collins, Solache, Soria, Stefani, Ta, Tangipa, Valencia, Wallis, Ward, Wicks, Wilson, Zbur, Rivas
NO VOTE RECORDED: Chen, Gallagher, Harabedian, Lackey
Prepared by: Alex Barnett / PUB. S. /
6/26/25 9:02:59
**** END ****
SENATE COMMITTEE ON PUBLIC SAFETY
Senator Jesse Arreguín, Chair
2025 - 2026 Regular
Bill No: AB 584 Hearing Date: June 10, 2025
Author: | Hadwick | ||
Version: | March 12, 2025 | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | AB | ||
Subject: Firearms dealers and manufacturers: secure facilities
HISTORY
Source: California Rifle and Pistol Association
Prior Legislation: AB 1420 (Berman), Ch. 245, Stats. of 2024
SB 241 (Min), Ch. 250, Stats. of 2023
SB 1384 (Min), Ch. 995, Stats. of 2022
AB 1064 (Muratsuchi), held in Assembly Appropriations, 2019
SB 220 (Hill), died on Assembly Floor, 2019
SB 464 (Hill), vetoed by the Governor, 2017
AB 2459 (McCarty), failed in Assembly Privacy, 2016
Support: Unknown
Opposition: None known
Assembly Floor Vote: 75 - 0
PURPOSE
The purpose of this bill is to provide licensed firearm dealers with an additional installation option for meeting “secure facility” requirements related to perimeter doors.
Existing law generally prohibits the sale, lease or transfer of firearms unless the transaction is completed through a dealer licensed by the Department of Justice (DOJ), and establishes various exceptions to this prohibition. (Pen. Code, §§ 26500 – 26625)
Existing law requires a firearms dealer or licensee to meet all the following requirements:
- Have a valid federal firearms license;
- Have any regulatory or business license, or licenses, required by local government;
- Have a valid seller’s permit issued by the California Department of Tax and Fee Administration;
- Have a certificate of eligibility issued by the DOJ, as specified;
- Have a license issued in a specified format; and,
- Be recorded in the DOJ’s centralized list of licensees. (Pen. Code, § 26700.)
Existing law requires DOJ to keep a centralized list of all persons licensed to sell, lease or transfer firearms at retail. (Pen. Code, § 26715, subd. (a).)
Existing law provides that a license to sell firearms is subject to forfeiture for any violation of a number of specified prohibitions and requirements, with limited exceptions. (Pen. Code, § 26800(a).)
Existing law requires the DOJ to conduct inspections of all firearms dealers at least once every three years, except as specified, to ensure compliance with certain specified statutes and any other applicable state law, and authorizes DOJ to assess an annual fee not to exceed $115 to cover the cost of maintaining the centralized list of licensees. (Pen. Code, § 26720, subd. (a)(1).)
Existing law provides that at any time when the licensee is not open for business, all inventory firearms shall be stored in the licensed location and using one of the following methods as to each particular firearm:
- Store the firearm in a secure facility that is a part of, or that constitutes, the licensee’s business premises.
- Secure the firearm with a hardened steel rod or cable of at least one-eighth inch in diameter through the trigger guard of the firearm. The steel rod or cable shall be secured with a hardened steel lock that has a shackle. The lock and shackle shall be protected or shielded from the use of a bolt cutter and the rod or cable shall be anchored in a manner that prevents the removal of the firearm from the premises.
- Store the firearm in a locked fireproof safe or vault in the licensee’s business premises.
Existing law provides that for the purposes of regulating firearms dealers, “secure facility” means that the facility satisfies all of the following:
- All perimeter doorways shall meet one of the following:
- A windowless steel security door equipped with both a dead bolt and a doorknob lock.
- A windowed metal door that is equipped with both a dead bolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.
- All windows are covered with steel bars.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- Any metal grates have spaces no larger than six inches wide measured in any direction.
- Any metal screens have spaces no larger than three inches wide measured in any direction.
- All steel bars shall be no further than six inches apart. (Pen. Code, § 17110.)
Existing law provides that for the purposes of specified provisions related to firearm manufacturers, “secure facility” means that the facility satisfies all of the following:
- The facility is equipped with a burglar alarm with central monitoring.
- All perimeter entries to areas in which firearms are stored other than doors, including windows and skylights, are secured with steel window guards or an audible, silent, or sonic alarm to detect entry.
- All perimeter doorways are designed in one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock.
- A windowed metal door equipped with both a deadbolt and a doorknob lock. If the window has an opening of five inches or more measured in any direction, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.
- Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door.
- Hinges and hasps installed so that they cannot be removed when the doors are closed and locked.
- Heating, ventilating, air-conditioning, and service openings are secured with steel bars, metal grating, or an alarm system.
- No perimeter metal grates are capable of being entered by any person.
- Steel bars that are not capable of being entered by any person.
- Perimeter walls of rooms in which firearms are stored are constructed of concrete or at least 10-gauge expanded steel wire mesh utilized along with typical wood frame and drywall construction. If firearms are not stored in a vault, the facility shall use an exterior
security-type door along with a high security, single-key deadbolt, or other door that is more secure. All firearms shall be stored in a separate room away from any general living area or work area. Any door to the storage facility shall be locked while unattended.
- Perimeter doorways, including the loading dock area, are locked at all times when not attended by paid employees or contracted employees, including security guards.
- Except when a firearm is currently being tested, any ammunition on the premises is removed from all manufactured guns and stored in a separate and locked room, cabinet, or box away from the storage area for the firearms. Ammunition may be stored with a weapon only in a locked safe. (Pen. Code, § 29141.)
Existing law authorizes a licensed firearms manufacturer that produces fewer than 500 firearms a year within California to alternatively maintain a “secure facility” by designing a security plan that is approved by the DOJ or the federal Bureau of Alcohol, Tobacco, Firearms and Explosives, which is then required to be submitted to federal and local authorities, as defined. (Pen. Code, § 29142, subds. (a)-(c).)
This bill provides that, for the purposes of the definition of “secure facility” that applies to both licensed firearm dealers and certain firearm manufacturers, a “perimeter doorway” may include a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
This bill states that the windowed or windowless steel door specified above must have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
This bill specifies that if the door is windowed and the window has an opening of five inches or more measured in any direction, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door.
COMMENTS
- Need for This Bill
According to the Author:
California law currently puts sporting goods stores that sell firearms in an impossible situation between safely securing their business and safely allowing customers to leave in an emergency. The law governing the security of firearms for stores has not been updated in over 25 years and does not reflect updated security door technology. This bill is a common sense solution that resolves a conflict in the law, gives stores another option to safely secure their firearms, and protects the public in an emergency.
- Firearms Dealer Licensing and Secure Facility Requirements
Federal law requires firearms dealers to obtain a license (also known as a “federal firearms license,” or “FFL”) through the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). According to the ATF, as of January 2025, there were 1,573 FFLs issued for firearms dealers and pawnbrokers in California, and a total of 11,126 FFLs in the state.[1] An FFL is necessary but not sufficient for obtaining a firearms dealer license in California. Additional requirements include any business license required by local government, a seller’s permit issued by the California Department of Tax and Fee Administration, a seller’s license issued by the local licensing authority of a local government, a certificate of eligibility (COE) issued by the DOJ (verifying that a background check has taken place), and being recorded on the DOJ’s centralized list of firearms dealers.[2] In California, only individuals that have obtained a valid license through the DOJ may lawfully sell, lease or transfer firearms within the state, subject to limited exceptions.[3]
Existing California law also includes several explicit security requirements for licensed firearm dealers, including a general requirement that all firearms in the inventory of a licensee be kept at the dealer’s licensed location.[4] Additionally, existing law requires that any time when the licensee is not open for business, all inventory firearms must be stored in the licensed location, and all firearms must be secured using one of the following methods: storage in a “secure facility” that is part of or constitutes the licensee’s business premises, secured by a hardened steel rod or cable, as specified, or stored in a locked fireproof safe or vault on the licensee’s business premises.[5] Licensed firearm manufacturers are subject to a related requirement that they store all manufactured firearms and firearm barrels in a secure facility.[6]
With regard to licensed firearm dealers that elect to store their firearms in a “secured facility” as opposed to one of the other options, existing law sets forth certain specifications that such a facility must meet in order to comply with the requirement. For instance, windows must be covered with steel bars, HVAC system and service openings must be secured with steel bars, metal grating or an alarm system, and all metal grates, screens and bars must meet specific requirements. Further, all perimeter doorways must meet one of three criteria: a windowless steel security door equipped with a dead bolt and doorknob lock, a windowed metal door with similar locking mechanisms and bars or grating over the window if it has an opening greater than 5 inches, or a metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe.[7]
The Author argues that “FFLs must comply with the California Penal Code’s definition of a ‘secure facility’ as a condition for a license to sell, lease, or transfer firearms at retail locations in the state of California, [but] this code section has not been updated in more than 25 years. […] FFLs must also comply with the California Fire Code which requires exit doors for commercial buildings to be opened without tight grasping, tight pinching or twisting of the wrist (CA Fire Code Part 3, Chapter 10, 1010.2.2). The combination of both these requirements puts FFLs in the impossible position of complying with one requirement or the other, facing penalties up to license revocation and fines from the California Office of the Attorney General for the former or facing penalties from a Fire Marshall for the latter.”
Seeking to address this conflict, this bill provides licensed firearm dealers and manufacturers with an additional installation option for a perimeter door at their business location that complies with the definition of “secure facility.” Specifically, the bill permits licensees to install a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door. If a licensee elects to install such a door, it must have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting, and if the door is windowed and the window has an opening of more than five inches in any direction, the window must be covered with steel bars or metal grating, as specified.
- Argument in Support
According to the bill’s sponsor, the California Rifle and Pistol Association:
AB 584 helps protect Californians by increasing the safety of firearms dealers and manufacturers from criminal activity by allowing vastly improved security technology to be employed.
Currently the California Penal Code and California Code of Regulations are in conflict in regard to the requirements of security doors. This conflict is currently reducing the security of facilities instead of improving it. This bill will remove the conflicts and thus offer more secure options for firearms dealers and manufacturers.
This bill sets forward options to meet legal requirements will enable firearms dealers and manufacturers to access the latest, safest, and most reliable security options while not compromising the safety of their customers and staff. This bill is a win in the fight to make Californians safer.
-- END –
“Report of Active Firearms Licenses – License Type by State Statistics.” Bureau of Alcohol, Tobacco, Firearms and Explosives. Print date: January 10, 2025. https://www.atf.gov/firearms/docs/undefined/0125-ffl-list-completepdf/download; The vast majority (8,792) of FFLs are registered collectors of curios and relics. ↑
Pen. Code, § 26700. ↑
Pen. Code, § 26500; see Penal Code §§27850 et. seq. for exceptions related to private party transfer. ↑
Pen. Code, § 26885; A related provision requires the business of a licensee to be conducted only in the buildings designated in the license, except in limited cases, see Pen. Code, § 26805. ↑
Pen. Code, § 26890; ↑
Pen. Code, § 29140. ↑
Per Pen. Code § 29141, firearm manufacturers have 2 additional options in securing perimeter doors to their premises in order to meet the definition of “secure facility.” ↑
Date of Hearing: April 9, 2025
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
ABPCA Bill Id:AB 584
Author:(Hadwick) – As Amended Ver:March 12, 2025
Policy Committee: | Public Safety | Vote: | 9 - 0 |
|
| ||
|
|
Urgency: No State Mandated Local Program: No Reimbursable: No
SUMMARY:
This bill allows a licensed firearm dealer to install, in their secure facility used for firearm storage, a type of secure door that complies with Building Code standards.
FISCAL EFFECT:
No significant state costs.
COMMENTS:
- Purpose. This bill is sponsored by the California Rifle and Pistol Association. According to the author:
California law currently puts sporting goods stores that sell firearms in an impossible situation between safely securing their business and safely allowing customers to leave in an emergency. The law governing the security of firearms for stores has not been updated in over 25 years and does not reflect updated security door technology. This bill is a common sense solution that resolves a conflict in the law, gives stores another option to safely secure their firearms, and protects the public in an emergency.
- Background. Under existing law, a licensed firearm dealer must comply with numerous laws and regulations that govern the sale of firearms in California. For example, a firearm dealer must maintain a secure facility in which firearms are stored. The secure facility must meet detailed requirements for its doors, windows, burglar alarms, ventilation grates, and other features, with the goal of ensuring no one can gain unauthorized access to the dealer’s firearms. A firearm dealer who fails to meet these requirements may be subject to suspension or revocation of their license, or a civil fine.
As described in more detail in the analysis of this bill by the Assembly Committee on Public Safety, the existing Penal Code requirements for a secure facility’s doors are in conflict with door safety requirements in the Building Code. This bill permits a firearm dealer to install a type of secure door that satisfies Building Code requirements.
Analysis Prepared by: Annika Carlson / APPR. / (916) 319-2081
Date of Hearing: March 25, 2025
Counsel: Dustin Weber
ASSEMBLY COMMITTEE ON
Nick Schultz, Chair
ABPCA Bill Id:
Author:() – As Ver:
SUMMARY:
Provides firearms businesses with an additional installation option for their perimeter doors that would meet secure facility requirements. Specifically, this bill:
- Allows perimeter doors to include a doorway with a windowed or windowless steel door that is equipped with panic hardware that operates a multipoint lock that bolts into the interior frame of the door.
- Requires the perimeter door to have a latch guard over the bolt closest to the primary locking bolt to protect it from prying or cutting.
- Mandates covering with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge and affixed to the exterior or interior of the door, any windowed door with a window opening of five inches or more.
- Makes technical, nonsubstantive changes.
EXISTING LAW:
- Requires all perimeter doorways at a licensed firearms dealer’s place of business to have one of the following features:
- A windowless steel security door equipped with both a dead bolt and doorknob lock;
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe; or,
- A windowed metal door that is equipped with both a dead bolt and a doorknob lock, and if the window has an opening of five inches or more, the window shall be covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door. (Pen. Code, § 17110, subd. (a)(1)-(3).)
- Requires all perimeter doorways at a licensed firearms manufacturer to be designed in at least one of the following ways:
- A windowless steel security door equipped with both a deadbolt and a doorknob lock;
- A windowed metal door equipped with both a deadbolt and a doorknob lock, and if the window has an opening of five inches or more, the window is covered with steel bars of at least one-half of an inch diameter or metal grating of at least nine gauge affixed to the exterior or interior of the door;
- A metal grate that is padlocked and affixed to the licensee’s premises independent of the door and doorframe;
- Hinges and hasps attached to doors by welding, riveting, or bolting with nuts on the inside of the door; or,
- Hinges and hasps installed on doors so that they cannot be removed when the doors are closed and locked. (Pen. Code, § 29141, subd. (c)(1)-(5).)
- A windowless steel security door equipped with both a deadbolt and a doorknob lock;
- Authorizes a licensed firearms manufacturer that produces fewer than 500 firearms a year within California to alternatively maintain a “secure facility” by designing a security plan that is approved by the Department of Justice or the federal Bureau of Alcohol, Tobacco, Firearms and Explosives, which is then required to be submitted to federal and local authorities, as defined. (Pen. Code, § 29142, subds. (a)-(c).)
FISCAL EFFECT:
Unknown
COMMENTS:
- Author's Statement: According to the author, “California law currently puts sporting goods stores that sell firearms in an impossible situation between safely securing their business and safely allowing customers to leave in an emergency. The law governing the security of firearms for stores has not been updated in over 25 years and does not reflect updated security door technology. This bill is a common sense solution that resolves a conflict in the law, gives stores another option to safely secure their firearms, and protects the public in an emergency.”
- Effect of the Bill: This bill would provide an additional option for firearms dealers and firearms manufacturers to comply with the statute’s perimeter door design requirements.
The impetus for expanding these options is to reconcile an apparent conflict between the Penal Code and the California Building Code (Building Code).
Existing law gives firearms dealers three options and firearms manufacturers five options for perimeter door designs, one of which must be installed for those businesses to maintain a “secure facility.” (Pen. Code, § 17110, subd. (a)(1)-(3) & Pen. Code, § 29141, subd. (c)(1)-(5).)
The Building Code provides that “door handles, pulls, latches, locks and other operating devices on doors required to be accessible shall not require tight grasping, tight pinching or twisting of the wrist to operate.” (Cal. Building Code, pt. 1010.2.2.) The Building Code applies to “the . . . use and occupancy . . . of every building or structure or any appurtenances connected or attached to such buildings or structures.” (Cal. Building Code, pt. 101.2.)
Given the Penal Code’s requirements for dealers and manufacturers to maintain secure facilities, including resilient perimeter doors, and the California Building Code requirements that mandate simple and quick means of egress through the same doors, there does not appear to be much space currently for firearms businesses to comply simultaneously with our Penal Code and Building Code.
- Safety and Convenience Considerations: This bill would provide an additional perimeter door option for firearms businesses, which would expand the options for these businesses to establish secure facilities under the law.
The safety and convenience of perimeter doors at firearms businesses is implicated by the secure facility requirements in the Penal Code and the easy means of egress requirements in the Building Code. While scientific research on the relative safety and convenience of multipoint locking doors appears scarce, a small amount of evidence exists showing that multipoint locks provide some additional measure of safety to the user, though the type and extent of those safety protections are unknown.
The patent for multipoint locking doors was granted in June 1999.[1] The patent classification described these doors as, “Arrangements of simultaneously actuated bolts or other securing devices at well-separated positions on the same wing with two sliding bars moved in opposite directions when fastening or unfastening with crank pins and connecting rods.”[2] The patent abstract states that the multipoint locking door “provides greater security for a door or panel being secured thereby…”[3] The only supporting scientific research located that corroborated this claim came from a research paper in 2016 where the authors wrote, “A multipoint lock is a useful lock which can provide more security and is more convenient for the user.”[4] Conclusive evidence was not located to establish whether “more convenient to the user” means that these types of doors are necessarily compliant with California building and fire codes.
It is not possible with the scientific research available to state conclusively whether these multipoint locking doors provide additional security relative to already approved perimeter doors and whether the added convenience is sufficient for our building codes, but there is at least some evidence showing improved safety and convenience with multipoint locking doors. None of the available research showed that multipoint locking doors were less safe or less convenient compared to common alternatives.
- Argument in Support: According to the California Rifle and Pistol Association (CRPA), which is also the bill’s sponsor, “On behalf of the California Rifle & Pistol Association Inc. (CRPA), its members and supporters throughout California, I write to express our strong support of Assembly Bill 584 (AB 584). CRPA, founded in 1875, works tirelessly to defend the civil and constitutional rights of individuals who choose to responsibly own and use firearms. CRPA promotes the recreational shooting sports, and provides safety, education, and skills training to enable all persons a more enjoyable and safe recreational experience. AB 584 helps protect Californians by increasing the safety of firearms dealers and manufacturers from criminal activity by allowing vastly improved security technology to be employed.
“Currently the California Penal Code and California Code of Regulations are in conflict in regard to the requirements of security doors. This conflict is currently reducing the security of facilities instead of improving it. This bill will remove the conflicts and thus offer more secure options for firearms dealers and manufacturers.
“This bill sets forward options to meet legal requirements will enable firearms dealers and manufacturers to access the latest, safest, and most reliable security options while not compromising the safety of their customers and staff. This bill is a win in the fight to make Californians safer. For the foregoing reasons the California Rifle and Pistol Association Inc. stands in strong support of AB 584.”
- Related Legislation:
- SB 53 (Blakespear), Chapter 542, Statutes of 2024, requires a person who possesses a firearm in a residence to keep the firearm securely stored when the firearm is not being carried or readily controlled by the person or another lawful authorized user.
- SB 368 (Portantino), Chapter 251, Statutes of 2023, requires a licensed firearms dealer to accept for storage a firearm transferred by an individual to prevent it from being accessed or used during periods of crisis or heightened risk, and authorizes a licensed firearms dealer to accept for storage a firearm for a lawful purpose not otherwise stated in the law.
- Prior Legislation:
- SB 376 (Portantino), Chapter 738, Statutes of 2019, requires licensure for anybody manufacturing 50 or more firearms.
- SB 220 (Hill), of the 2019-20 Legislative Session, would have required firearms dealers to secure and store their firearms using one of several specified methods, including storing firearms behind a steel roll-down door or security gate. SB 220 died on the inactive file in the Assembly.
REGISTERED SUPPORT / OPPOSITION:
Support
California Rifle and Pistol Association, INC.
Opposition
None on file.
Analysis Prepared by:
Quesada, “Three Point Lock Mechanism” (June 15, 1999) United States Patent and Trademark Office <https://patentcenter.uspto.gov/applications/09005593> [as of Mar. 18. 2025]. ↑
Ibid. ↑
Ibid. ↑
Hsing-Hui, Design of the Transmission Mechanism Used in a Multipoint Mortise Lock (Dec. 2016) Transactions of The Canadian Society for Mechanical Engineering <https://www.researchgate.net/publication/316961158_Design_of_the_transmission_mechanism_used_in_a_multipoint_mortise_lock> [as of Mar. 18, 2025]. ↑
Bill Author
Bill Co-Author(s):