SB 404: Hazardous materials: metal shredding facilities.
- Session Year: 2025-2026
- House: Senate
- Latest Version Date: 2025-09-17
Current Status:
Failed
(2026-03-02: Veto sustained.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting, as provided. The bill would require the department to take final action on a permit application by an existing facility within 3 years, as provided. The bill would require the department to post on its internet website general information about each metal shredding facility that has applied for or obtained a permit, and to conduct at least one site visit to the applicants facility after receipt of the permit application. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and certified under penalty of law, including criminal penalties, as specified. The bill would require the DTSC to have primary responsibility for enforcing these provisions, would require the DTSC to conduct an annual compliance evaluation inspection of each metal shredding facility, and would authorize the DTSC to refer violations to a district attorney or the Attorney General for prosecution. The bill would also require the DTSC to inform the local health officer and the director of environmental health of a county, city, or district within 15 days after the DTSC becomes aware of any unlawful disposal of materials, as provided, and of any enforcement action against a metal shredding facility as a result of that unlawful disposal. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would also require the owner or operator of a metal shredding facility to provide written notice to the department at least 60 days before transferring ownership or operation of the facility. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would authorize the DTSC to adopt regulations for the operation of metal shredding facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require, beginning in the 202627 fiscal year, the rates established by the DTSC to be reviewed and increased or decreased annually, as provided. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using emergency procedures, as specified. The bill would require a person who applies for a metal shredding facility permit to enter into a written agreement with the department pursuant to which that person would be required to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as provided. The bill would require the Controller to establish a new and separate Metal Shredding Facility subaccount to be administered by the Director of Toxic Substances Control and would require all fees collected to be placed into that subaccount and made available for expenditure by the DTSC solely for the purpose of implementation and administration of these provisions, upon appropriation by the Legislature.
Existing law requires the DTSC to require metal shredding facilities to monitor hazardous waste constituents requested by the DTSC and to report the results of that monitoring to the DTSC. Existing law also requires the DTSC to collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste. Existing law requires, on or before July 1, 2027, the DTSC to develop a procedure for community notification of the public for the area in which the metal shredding facility is located if that monitoring indicates any release of light fibrous material. In addition, existing law requires, on or before January 1, 2027, an air pollution control district or an air quality management district the jurisdiction of which includes metal shredding facilities, in consultation with the DTSC and the Office of Environmental Health Hazard Assessment (OEHHA), to develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities. Existing law authorizes any reasonable regulatory costs incurred by the DTSC in implementing, and requires that the OEHHAs costs to implement, the above-described duties be reimbursed from a subaccount established in the Hazardous Waste Control Account for the deposit of fees from metal shredding facilities.
This bill would limit the scope of those provisions to metal shredding facilities that are subject to the other provisions of the bill and would provide for the reimbursement of those costs from the Metal Shredding Facility Subaccount.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting, as provided. The bill would require the department to take final action on a permit application by an existing facility within 3 years, as provided. The bill would require the department to post on its internet website general information about each metal shredding facility that has applied for or obtained a permit, and to conduct at least one site visit to the applicants facility after receipt of the permit application. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and certified under penalty of law, including criminal penalties, as specified. The bill would require the DTSC to have primary responsibility for enforcing these provisions, would require the DTSC to conduct an annual compliance evaluation inspection of each metal shredding facility, and would authorize the DTSC to refer violations to a district attorney or the Attorney General for prosecution. The bill would also require the DTSC to inform the local health officer and the director of environmental health of a county, city, or district within 15 days after the DTSC becomes aware of any unlawful disposal of materials, as provided, and of any enforcement action against a metal shredding facility as a result of that unlawful disposal. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would also require the owner or operator of a metal shredding facility to provide written notice to the department at least 60 days before transferring ownership or operation of the facility. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would authorize the DTSC to adopt regulations for the operation of metal shredding facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require, beginning in the 202627 fiscal year, the rates established by the DTSC to be reviewed and increased or decreased annually, as provided. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using emergency procedures, as specified. The bill would require a person who applies for a metal shredding facility permit to enter into a written agreement with the department pursuant to which that person would be required to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as provided. The bill would require the Controller to establish a new and separate Metal Shredding Facility subaccount to be administered by the Director of Toxic Substances Control and would require all fees collected to be placed into that subaccount and made available for expenditure by the DTSC solely for the purpose of implementation and administration of these provisions, upon appropriation by the Legislature.
Existing law requires the DTSC to require metal shredding facilities to monitor hazardous waste constituents requested by the DTSC and to report the results of that monitoring to the DTSC. Existing law also requires the DTSC to collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste. Existing law requires, on or before July 1, 2027, the DTSC to develop a procedure for community notification of the public for the area in which the metal shredding facility is located if that monitoring indicates any release of light fibrous material. In addition, existing law requires, on or before January 1, 2027, an air pollution control district or an air quality management district the jurisdiction of which includes metal shredding facilities, in consultation with the DTSC and the Office of Environmental Health Hazard Assessment (OEHHA), to develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities. Existing law authorizes any reasonable regulatory costs incurred by the DTSC in implementing, and requires that the OEHHAs costs to implement, the above-described duties be reimbursed from a subaccount established in the Hazardous Waste Control Account for the deposit of fees from metal shredding facilities.
This bill would limit the scope of those provisions to metal shredding facilities that are subject to the other provisions of the bill and would provide for the reimbursement of those costs from the Metal Shredding Facility Subaccount.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting, as provided. The bill would require the department to take final action on a permit application by an existing facility within 3 years, as provided. The bill would require the department to post on its internet website general information about each metal shredding facility that has applied for or obtained a permit, and to conduct at least one site visit to the applicants facility after receipt of the permit application. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and certified under penalty of law, including criminal penalties, as specified. The bill would require the DTSC to have primary responsibility for enforcing these provisions, would require the DTSC to conduct an annual compliance evaluation inspection of each metal shredding facility, and would authorize the DTSC to refer violations to a district attorney or the Attorney General for prosecution. The bill would also require the DTSC to inform the local health officer and the director of environmental health of a county, city, or district within 15 days after the DTSC becomes aware of any unlawful disposal of materials, as provided, and of any enforcement action against a metal shredding facility as a result of that unlawful disposal. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would also require the owner or operator of a metal shredding facility to provide written notice to the department at least 60 days before transferring ownership or operation of the facility. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would authorize the DTSC to adopt regulations for the operation of metal shredding facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require, beginning in the 202627 fiscal year, the rates established by the DTSC to be reviewed and increased or decreased annually, as provided. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using emergency procedures, as specified. The bill would require a person who applies for a metal shredding facility permit to enter into a written agreement with the department pursuant to which that person would be required to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as provided. The bill would require the Controller to establish a new and separate Metal Shredders Shredding Facility Account subaccount to be administered by the Director of Toxic Substances Control and would require all fees collected to be placed into that account subaccount and made available for expenditure by the DTSC solely for the purpose of implementation and administration of these provisions, upon appropriation by the Legislature.
Existing law requires the DTSC to require metal shredding facilities to monitor hazardous waste constituents requested by the DTSC and to report the results of that monitoring to the DTSC. Existing law also requires the DTSC to collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste. Existing law requires, on or before July 1, 2027, the DTSC to develop a procedure for community notification of the public for the area in which the metal shredding facility is located if that monitoring indicates any release of light fibrous material. In addition, existing law requires, on or before January 1, 2027, an air pollution control district or an air quality management district the jurisdiction of which includes metal shredding facilities, in consultation with the DTSC and the Office of Environmental Health Hazard Assessment (OEHHA), to develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities. Existing law authorizes any reasonable regulatory costs incurred by the DTSC in implementing, and requires that the OEHHAs costs to implement, the above-described duties be reimbursed from a subaccount established in the Hazardous Waste Control Account for the deposit of fees from metal shredding facilities.
This bill would limit the scope of those provisions to metal shredding facilities that are subject to the other provisions of the bill and would provide for the reimbursement of those costs from the Metal Shredding Facility Subaccount.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting, as provided. The bill would require the department to take final action on a permit application by an existing facility within 3 years, as provided. The bill would require the department to post on its internet website general information about each metal shredding facility that has applied for or obtained a permit, and to conduct at least one site visit to the applicants facility after receipt of the permit application. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would also require the owner or operator of a metal shredding facility to provide written notice to the department at least 60 days before transferring ownership or operation of the facility. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would authorize the DTSC to adopt regulations for the operation of metal shredding facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using emergency procedures, as specified. The bill would require a person who applies for a metal shredding facility permit to enter into a written agreement with the department pursuant to which that person would be required to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as provided. The bill would require the Controller to establish a new and separate Metal Shredders Facility Account and would require all fees collected to be placed into that account and made available for expenditure by the DTSC solely for the purpose of implementation and administration of these provisions, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting, as provided. The bill would require the department to take final action on a permit application by an existing facility within 3 years, as provided. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would also require the owner or operator of a metal shredding facility to provide written notice to the department at least 60 days before transferring ownership or operation of the facility. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would authorize the DTSC to adopt regulations for the operation of metal shredding facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using emergency procedures, as specified. The bill would require a person who applies for a metal shredding facility permit to enter into a written agreement with the department pursuant to which that person would be required to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as provided. The bill would require the Controller to establish a new and separate Metal Shredders Facility Account and would require all fees collected to be placed into that account and made available for expenditure by the DTSC solely for the purpose of implementation and administration of these provisions, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting or solicit comment from the community on the completed application materials, meeting, as provided. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and be certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would require authorize the DTSC to adopt regulations for the operation of metal shredding facilities. facilities as necessary to implement the requirements of the bill. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using the same emergency procedures, as specified. The bill would require the Controller to establish a new and separate subaccount in the Hazardous Waste Control Account Metal Shredders Facility Account and would require all fees collected to be placed into that subaccount, to be account and made available for expenditure by the DTSC for purposes solely for the purpose of implementation and administration of the provisions of the bill, these provisions, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting or solicit comment from the community on the completed application materials, as provided. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and be certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would require the DTSC to adopt regulations for the operation of metal shredding facilities. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, with the exception of information that is submitted to the department under a claim of trade secrecy or business confidentiality and that has been determined by the department to be exempt from disclosure, as provided. except as otherwise required pursuant to existing law.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using the same emergency procedures, as specified. The bill would require the Controller to establish a separate subaccount in the Hazardous Waste Control Account and would require all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC for purposes of implementation and administration of the provisions of the bill, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
Existing constitutional provisions require that a statute that limits the right of access to the meetings of public bodies or the writings of public officials and agencies be adopted with findings demonstrating the interest protected by the limitation and the need for protecting that interest.This bill would make legislative findings to that effect.The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within the DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions and provisions. The bill would establish a comprehensive scheme for the regulation of metal shredding facilities. facilities that would be administered by the DTSC pursuant to authority separate from laws governing the control of hazardous waste. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from the DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would require, before a decision is made to approve or deny the application, the DTSC to hold a public meeting or solicit comment from the community on the completed application materials, as provided. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and be certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to the DTSC any release or threatened release of a hazardous substance and certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to the DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would authorize the DTSC to enforce these provisions by revoking permits and by other specified means. The bill would require the department to develop, on or before July 1, 2027, a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring indicates any release of light fibrous material, and to develop, on or before January 1, 2027, related regulations, as provided. The bill would require the DTSC to adopt regulations for the operation of metal shredding facilities. The bill would require the DTSC to post information provided by owners and operators regarding a metal shredding facility on the departments internet website in a manner that is readily accessible to the public, with the exception of information that is submitted to the department under a claim of trade secrecy or business confidentiality and that has been determined by the department to be exempt from disclosure, as provided.
Existing law authorizes the DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or the DTSCs management standards for metal shredding facilities, as provided. Existing law requires the DTSC to adopt regulations necessary to administer the fee and authorizes the DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC upon appropriation by the Legislature.
This bill would instead require the DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require the DTSC to adopt regulations necessary to administer the fee and would authorize the DTSC to adopt the regulations using the same emergency procedures, as specified. The bill would require the Controller to establish a separate subaccount in the Hazardous Waste Control Account and would require all fees collected to be placed into that subaccount, to be available for expenditure by the DTSC for purposes of implementation and administration of the provisions of the bill, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
Existing constitutional provisions require that a statute that limits the right of access to the meetings of public bodies or the writings of public officials and agencies be adopted with findings demonstrating the interest protected by the limitation and the need for protecting that interest.
This bill would make legislative findings to that effect.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law authorizes the Department of Toxic Substances Control (DTSC), in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations to establish management standards for metal shredding facilities for hazardous waste management activities within DTSCs jurisdiction, as provided. Existing law provides that treated metal shredder waste that is managed in accordance with those regulations is deemed to be solid waste, and not hazardous waste, as provided.
This bill would repeal those provisions and would establish a comprehensive scheme for the regulation of metal shredding facilities. The bill would prohibit an owner or operator from operating a metal shredding facility, as defined, in the state unless they have a permit from DTSC or are deemed to have a permit. The bill would prescribe the requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, and for transporting certain materials related to metal shredding, as specified. The bill would provide that certain materials related to metal shredding are not hazardous waste if they meet specified requirements. The bill would require any report required to be submitted by a metal shredding facility pursuant to a permit issued to be signed by the owner or operator and be certified under penalty of law, including criminal penalties, as specified. Because the bill would expand the scope of a crime, the bill would impose a state-mandated local program. The bill would require an owner or operator of a metal shredding facility to report to DTSC any release or threatened release of a hazardous substance and certain emergency situations, as specified. The bill would require an owner or operator of a metal shredding facility to submit to DTSC a closure plan and a cost estimate for closing the metal shredding facility, as specified. The bill would authorize DTSC to enforce these provisions by revoking permits and by other specified means. The bill would require the department to develop, on or before July 1, 2027, a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring indicates any release of light fibrous material, and to develop, on or before January 1, 2027, related regulations, as provided. The bill would require DTSC to adopt regulations for the operation of metal shredding facilities.
Existing law authorizes DTSC to collect an annual fee from all metal shredding facilities subject to the requirements of hazardous waste control laws or DTSCs management standards for metal shredding facilities, as provided. Existing law requires DTSC to adopt regulations necessary to administer the fee and authorizes DTSC to adopt those regulations using emergency procedures, as provided. Existing law requires the Controller to establish a separate subaccount in the Hazardous Waste Control Account and for all fees collected to be placed into that subaccount, to be available for expenditure by DTSC upon appropriation by the Legislature.
This bill would instead require DTSC to impose an annual fee on all metal shredding facilities subject to the provisions of this bill, as specified. The bill would require DTSC to adopt regulations necessary to administer the fee and would authorize DTSC to adopt the regulations using the same emergency procedures, as specified. The bill would require the Controller to establish a separate subaccount in the Hazardous Waste Control Account and would require all fees collected to be placed into that subaccount, to be available for expenditure by DTSC for purposes of implementation and administration of the provisions of the bill, upon appropriation by the Legislature.
The bill would include findings that changes proposed by this bill address a matter of statewide concern rather than a municipal affair and, therefore, apply to all cities, including charter cities.
Existing constitutional provisions require that a statute that limits the right of access to the meetings of public bodies or the writings of public officials and agencies be adopted with findings demonstrating the interest protected by the limitation and the need for protecting that interest.
This bill would make legislative findings to that effect.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry, and to individual facilities based on their size and nature of operations, while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Protects public health and the environment and all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(b)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(c)Department means the Department of Toxic Substances Control.
(d)Effective date means the date that this chapter becomes operative.
(e)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(f)Feeder yard means a metal recycling facility that collects, sorts, or processes scrap metal, through means other than the use of a hammer mill, from which scrap metal is sold to customers or transferred to a metal shredding facility for further processing and recycling.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
(s)Small metal shredding facility means a facility that processes no more than 250 tons per day or 65,000 tons per year of metallic feedstock materials using a stationary hammer mill and meets each of the following conditions:
(1)The facility does not shred whole end-of-life vehicles, whole agricultural equipment, or whole white goods.
(2)The facility does not conduct on-site chemical treatment of metal shredder residue.
(3)The facility does not conduct any activity that requires the use of an on-site thermal oxidizer.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities. However, this chapter does not alter or override the authority of the department or a unified program agency, as defined in Section 25404, to regulate hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the effective date, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the effective date, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Care Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations or to a specific provision of Chapter 6.5 (commencing with Section 25100) shall be understood to apply the technical requirements of those regulations or standards to metal processing operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a unified program agency, as defined in Section 25404, or the authority of a local environmental health department that is not a unified program agency to regulate any activity at a metal shredding facility that falls within the scope of the agencys jurisdiction under existing law.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
25095.8.(a)Except as otherwise expressly defined in this chapter or regulations implementing this chapter, all terms in this chapter that are defined in Article 2 (commencing with Section 25110) of Chapter 6.5 or its implementing regulations shall have the meanings provided in Article 2 (commencing with Section 25110) of Chapter 6.5 and its implementing regulations.
(b)Any reference in this chapter to a requirement of Chapter 6.5 (commencing with Section 25100) or to the regulations in Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations applies to metal processing operations authorized pursuant to this chapter.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and the schedule for any interim measures or controls issued pursuant to subdivision (h) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Without exception, the facility shall have developed and shall continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply to the department for a permit pursuant to this chapter no later than six months following submittal of the notice of intent, except a small metal shredding facility shall apply for a permit no later than one year following submittal of the notice of intent. In all cases, the application shall include all of the following information:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, as specified in paragraph (3) of subdivision (a) of Section 25095.13 including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A plan for the prevention, detection, and response to fires that includes, at a minimum, provisions for the continuous monitoring of stockpiles of shredder feedstock and metal shredder aggregate for increases in temperature, periodic fire patrols, regular watering of feedstock and aggregate piles, availability of adequate water supplies, water pressure and fire-fighting equipment at the facility, maintenance of fire lanes, and operator training in fire prevention, detection, and response.
(D)A closure plan.
(E)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill.
(F)An inventory management plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(G)A facility security plan consistent with the requirements of Section 66265.14 of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(N)A training plan that addresses each of the following areas:
(i)Prevention of releases of metal shredder aggregate, including light fibrous material, and metal shredder residue.
(ii)Fire prevention, detection, and suppression.
(iii)Response to natural disasters, such as earthquakes, wildfires, and floods.
(iv)Emergency response procedures and notification.
(v)Inventory management.
(3)The department shall post all information provided by the owner or operator of a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. For purposes of this subdivision, the department shall consider an application to be complete if it includes each of the plans and other information specified in subdivision (a). Failure of the owner or operator to provide a complete permit application within one year shall be grounds for the department to initiate denial of the application, subject to the following:
(A)The three-year period for review of an application may be extended as necessary for completion of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) process.
(B)If the department does not complete the permit process and issue the permit within three years, the department shall provide written notice to the public, setting forth an explanation for the delay, and shall conduct a public meeting upon request.
(C)If the owner or operator of a facility has timely submitted a complete application and responded to any additional requests for information from the department, the facility may continue to operate, subject to all requirements applicable to the facility under this chapter, pending final action on its permit application even if the department does not complete the permit review process within the timeframe specified in this paragraph.
(5)The owner or operator shall comply with the provisions of each plan required under paragraph (2) as approved by the department and incorporated into the permit for the facility. The department shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(6)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(7)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, and the specific terms and conditions to be included in the permit, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(8)The department shall also conduct at least one site visit to the applicants facility after receipt of the permit application.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance, using a form of communication preferred by the community, and be held in an accessible location at a convenient time. The applicant shall invite the department and other regulatory agencies with jurisdiction over the metal shredding facility.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process, including the owners or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
(i)The department shall post on its internet website general information about each metal shredding facility that has applied for or obtained a permit under this chapter, including without limitation the facilitys current permit status, a schedule for issuance of a draft permit and associated public meetings and opportunity for public comment periods, and a summary of the facilitys compliance history subsequent to the effective date.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments final permit decision, subject to all of the following requirements specified in this section. Failure to meet the requirements of this section shall be subject to enforcement under Article 8 (commencing with Section 25095.60).
(a)(1)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with, including without limitation provisions applicable to management of metal shredder aggregate, light fibrous material, and metal shredder residue, and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(2)Plans shall be submitted along with the permit application required in subdivision (b) of Section 25095.10.
(b)On or before the effective date, the owner or operator complies with the requirements set forth in subdivision (b) of Section 25095.13. A copy of the fire response plan shall be submitted to the department within seven days of the effective date and shall be subject to review and approval of the department after consultation with the facility and the local fire department of the jurisdiction where the facility is located.
(c)On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(d)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations, except that a small metal shredding facility may submit the financial assurance mechanism within 90 days after the permit application is submitted.
(e)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(f)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all hazardous wastes generated at the facility.
(g)The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department, a unified program agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste or hazardous waste constituents.
(3)Metal shredder residue.
(4)Chemically treated metal shredder residue.
(h)The owner or operator complies with the following standards:
(1)Containment areas shall be in good condition; if there is a leak, contents shall be immediately transferred.
(2)Accumulation areas shall be inspected at least weekly.
(3)Containment areas shall be visibly labeled with contents and start date of accumulation. If labeling is infeasible, a record of the start dates of accumulation shall be maintained and made available to the public upon request.
(4)Incompatible materials shall not be kept together.
(5)All emergency equipment shall be regularly tested or maintained according to manufacturer standards.
(6)Employees shall have unimpeded access to emergency materials.
(7)There shall be at least one person on premises or on call at all times.
(8)Personnel training shall be required for emergency procedures for all possible emergencies and prevention requirements and shall include job specific and general awareness training.
(i)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements and a reasonable schedule for compliance with those measures.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)(1)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(2)The owner or operator shall take precautions to prevent accidental ignition or reaction of material that exhibits the characteristics of ignitability or reactivity. While ignitable or reactive material is being handled, the owner or operator shall confine smoking and open flame to specially designated locations. No Smoking signs shall be conspicuously placed wherever there is a hazard from ignitable or reactive material.
(3)The transfer, treatment, storage, or disposal of ignitable or reactive material shall be conducted so that it does not do any of the following:
(A)Generate extreme heat or pressure, fire or explosion, or violent reaction.
(B)Produce uncontrolled toxic mists, fumes, dusts, or gases in sufficient quantities to threaten human health or the environment.
(C)Produce uncontrolled flammable fumes or gases in sufficient quantities to pose a risk of fire or explosions.
(D)Damage the structural integrity of the device or facility containing the material.
(E)Any other activity similar to those listed in subparagraphs (A) to (D), inclusive, that threatens human health or the environment.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(M)Materials requiring special handling, as defined in Section 42167 of the Public Resources Code.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100) and its implementing regulations.
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(H)Records of offsite transportation of metal shredder aggregate and CTMSR.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with all of the following:
(1)Subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(2)The contingency plan as required in subparagraph (C) of paragraph (1) of subdivision (d).
(3)As applicable, Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(4)Article 16 (commencing with Section 66265.370) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
(g)The owner or operator of a metal shredding facility shall provide written notice to the department at least 60 days before transferring ownership or operation of the facility.
(h)The owner or operator shall prevent the unknowing entry, and prevent unauthorized entry, of persons or livestock onto the active portion of the facility.
(i)For any new construction at a facility located in a 100-year floodplain or within the maximum high tide, the facility shall take all reasonable and feasible precautions to prevent washout of any hazardous materials.
(j)For any new construction at a facility, the facility shall take all reasonable and feasible precautions to withstand the maximum credible earthquake.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A copy of a general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations, and, as applicable, complies with the specific requirements in subdivision (i) of Section 66264.193, and Sections 66264.195, 66264.226, 66264.273, 66264.303, 66264.602, 66264.1033, 66264.1052, 66264.1053, 66264.1058, 66264.1084, 66264.1085, 66264.1086, 66265.1088, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material and metal shredder residue may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of shredder feedstock and metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (E) of paragraph (2) of subdivision (b).
(5)Standards for the installation and maintenance of paving with concrete, steel plate, or other surfacing materials approved by the department that are designed to prevent infiltration and to collect and route water to a water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Procedures for response to incipient fires and access to adequate water, water pressure, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments, the unified program agency, if other than the fire department, and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)Monitoring of temperatures on all feedstock and metal shredder aggregate piles, using an infrared camera or other equivalent equipment that continuously monitors the temperature of feedstock and aggregate piles and provides an alarm or other indication of temperature increases outside normal range.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles, including typical periods of breakdown, maintenance, and repair. The following limits shall apply:
(i)No individual stockpile of feedstock shall exceed the amount of material that can be processed within a 24-hour period.
(ii)No individual pile of metal shredder aggregate shall exceed the amount of material that can be processed within a 48-hour period.
(iii)No individual pile of feedstock or metal shredder aggregate shall remain inactive for more than 48 hours except during periods when the facility is closed or not operating. Periods of breakdown, maintenance and repair, or under other circumstances specified in the facilitys approved inventory management plan, shall not be included in calculating the 48-hour period. A pile shall not be considered inactive if the majority of the material in the pile is removed over a period of 48 hours. In the event of an incident that is required to be reported to the department under Section 25095.31, the department may reduce the number of hours that a pile of feedstock or metal shredder aggregate may remain inactive until the owner or operator demonstrates to the satisfaction of the department and the local fire department that the risk of fire has been mitigated.
(iv)During any period of breakdown and associated repair that exceeds 72 hours, the feedstock and metal shredder aggregate piles shall be subject to additional controls as specified in the facilitys approved inventory management plan. Any shredder feedstock accepted by the facility during a period of breakdown, maintenance, or repair exceeding 72 hours shall be managed in accordance with the facilitys approved inventory management plan.
(v)All feedstock and metal shredder aggregate piles shall be subject to continuous 24-hour onsite surveillance, including when the facility is not operating, and such other additional controls specified in the facilitys approved fire response plan. All electronic surveillance data shall be maintained for a period of at least 14 days following any incident that is required to be reported to the department under Section 25095.31.
(F)Provisions for capture and management of fire suppression water as necessary to prevent discharge into storm drains or runoff into surface water.
(G)Requirement for at least one person to be present at the facility or on call at all times.
(3)The department, in coordination with the local fire department of the jurisdiction where the metal shredding facility is located, shall review a facilitys fire response plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)Except as provided in subdivision (d), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains substantial compliance with this chapter and the owner or operator provides the department with written notice of these changes within 30 days of making the changes. The department shall post the notice on the section of its internet website that provides information regarding metal shredding facilities.
(c)The department shall evaluate the information provided in the notice from the facility pursuant to this subdivision, as well as any objections from the public, to assess whether the modification could result in a potentially significant impact on the environment. If the department determines that the modification could have a potentially significant impact on the environment, the owner or operator of the facility shall be required to implement changes to the modification as necessary to mitigate the impact to the extent feasible.
(d)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(e)(1)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(2)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to subdivision (b) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(3)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (1) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be included in the annual report submitted to the department pursuant to Section 25095.14.
(4)Any liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys recycled water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department, the unified program agency, and the local fire department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain liability insurance in accordance with Section 34631.5 of the Vehicle Code. A transporter shall cease to transport metal shredder aggregate upon loss of liability coverage.
(f)The owner or operator of the originating facility shall include in the annual report submitted to the department under Section 25095.14 the total tonnage of metal shredder aggregate that was shipped to another recycling facility for processing during the calendar year, the name of each transporter used for this purpose, the bill of lading numbers, and the total tonnage transported by that transporter during the calendar year, and the name and location of the facilities that processed the material. The department shall handle the information in a manner consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Section 25095.10 or 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The vehicle of railcar used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous materials or wastes that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations, the unified program agency, and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how the equipment and areas used for processing metal shredder aggregate and for treating metal shredder residue will be closed. The description shall identify the maximum extent of the operation during the life of the equipment or area and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of metal shredder aggregate and metal shredder residue in storage and in treatment at any time during the operation of the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate an area, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)The facility has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, the equipment or area, closure of the equipment and area would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department consistent with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
(e)If the facility is required to implement postclosure care following closure of the facility, the owner or operator shall provide a financial assurance mechanism for postclosure using one or more of the financial mechanisms described in Section 66265.145 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The following definitions shall apply for purposes of this article:
(1)Fee rate means the rate to be set by the department for the 202627 fiscal year, as annually adjusted by the Board of Environmental Safety beginning in the 202728 fiscal year and thereafter pursuant to subdivision (b).
(2)Fee schedule means the fee structure established in regulations by the department pursuant to subdivision (b) using the criteria in subdivision (c).
(b)(1)Beginning in the 202728 fiscal year, the rates established by the department shall be reviewed and shall be increased or decreased annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department and the Office of Environmental Health Hazard Assessment to implement this chapter as described in this section.
(2)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations to administer this fee and to establish a fee schedule and rate that is sufficient to cover the departments reasonable costs to implement this chapter and Sections 25150.87 and 41514.6, excluding the costs described in Section 25095.51.
(3)The fee rate shall include, but not be limited to, the costs of fee administration, the costs of collection of the fee, the departments administrative costs, and statewide general administrative costs related to implementation of this chapter and Sections 25150.87 and 41514.6.
(4)The fee rate shall allow for a reserve in the fund each year at an amount sufficient to ensure that all programs funded by the subaccount will not be adversely affected by revenue shortfalls or baseline expenditure adjustments and does not exceed 10 percent of the authorized expenditure levels.
(5)The fees established pursuant to this section shall also be sufficient to cover the Office of Environmental Health Hazard Assessments reasonable costs to implement Sections 25150.87 and 41514.6.
(c)In establishing fee schedule that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (5) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of feedstock that is shredded on an annual basis.
(4)The types of feedstock that are shredded at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(d)The Controller shall establish a new and separate Metal Shredding Facility Subaccount in the Hazardous Waste Control Account. The Metal Shredding Facility Subaccount shall be administered by the Director of Toxic Substances Control. The fees collected pursuant to this section shall be deposited into the Metal Shredding Facility Subaccount and be available for expenditure by the department and the Office of Environmental Health Hazard Assessment, upon appropriation by the Legislature, solely for the purpose of implementation and administration of this chapter and Sections 25150.87 and 41514.6. The Director of Finance, upon request of the Director of Toxic Substances Control, may make a loan from the General Fund to the Metal Shredding Facility Subaccount to meet cash needs. The loan shall be subject to the repayment provisions of Section 16351 of the Government Code and the interest provisions of Section 16314 of the Government Code.
(e)(1)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department or the Board of Environmental Safety pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department or the Board of Environmental Safety, whichever occurs sooner.
(2)Before adopting a regulation pursuant to this section, the department shall hold at least two public hearings regarding the proposed regulation, including one public hearing dedicated to assessing the impact of the proposed regulation on small metal shredding facilities as defined in this chapter.
(f)(1)A metal shredding facility paying an annual fee in accordance with this section is not subject to any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production, transportation, and processing of metal shredder aggregate, the generation, handling, and management, transportation, and disposal of nonhazardous metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is subject to the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
25095.51.(a)(1)(A)A person who applies for a metal shredding facility permit under this chapter shall enter into a written agreement with the department pursuant to which that person shall reimburse the department for the direct costs reasonably incurred by the department in processing the permit application. The fee shall be sufficient to cover the departments review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit. The permit fee shall be established on the basis of the same factors listed in subdivision (b) of Section 25095.50.
(B)The fee shall be in addition to and separate from the annual fee assessed pursuant to Section 25095.50.
(2)An agreement required pursuant to paragraph (1) shall provide for a 25-percent deposit to be made with the submittal of the application. The 25-percent advance payment shall be based upon the departments total estimated costs of processing the application.
(b)(1)Pursuant to Section 21089 of the Public Resources Code, an applicant for a metal shredding facility permit shall also pay all costs incurred by the department for purposes of complying with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), in conjunction with the application.
(2)Paragraph (1) does not apply to projects that are exempt from CEQA.
(c)Funds received pursuant to this section shall be placed in the Metal Shredding Facility Subaccount specified in subdivision (d) of Section 25095.50 and be available for expenditure by the department, upon appropriation by the Legislature, solely for the purposes of implementation and administration of this chapter and Sections 25150.87 and 41514.6.
8.Enforcement25095.60.(a)The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and implementing regulations set forth in Article 3 (commencing with Section 25095.10) of Chapter 22 of Division 4.5 of Title 22 California Code of Regulations may be used to enforce this chapter, including, but not limited to, the authority to conduct inspections and pursue administrative or judicial enforcement for violations of this chapter and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment, and to deny an application for a permit for any of the reasons set forth in paragraph (1) of subdivision (a) of Section 25095.61. These enforcement mechanisms shall apply to violations of this chapter relating to the management of materials listed in subdivision (a) of Sections 25095.20 and 25095.21.
(b)(1)The department may order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, if the owner or operator fails to develop and implement a fire response plan as required by paragraphs (1) and (2) of subdivision (b) of Section 25095.13. The owner or operator may resume shredder operations and receipt of feedstock immediately upon providing written confirmation to the department that the facility is operating in accordance with a fire response plan.
(2)The department may prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. So long as the owner or operator of the facility has developed and is implementing a fire response plan, the facility may continue to conduct metal shredding operations and metal processing operations to reduce the inventory of shredder feedstock or metal shredder aggregate, as appropriate, and may resume receipt of feedstock at the facility immediately upon providing written confirmation to the department compliance with the limitations on pile size and duration have been achieved.
(c)The department shall conduct an annual compliance evaluation inspection of each metal shredding facility regulated under this chapter. The unified program agency or local environmental health official shall be allowed to participate in the inspection.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, modification, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(6)Any person who submitted written comments on the draft permit may file an appeal of the departments final permit decision with the Office of Administrative Hearings, pursuant to Chapter 5 (commencing with Section 11500) of Part I of Division 3 of Title 22 of the Government Code. An appeal filed pursuant to this paragraph shall be limited to those conditions of the final permit that were included in the persons written comments to the department during the public comment period.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)(1)The department shall have primary responsibility for enforcement of the terms of this chapter and may refer violations of this chapter to a district attorney or the Attorney General for prosecution. Notwithstanding this authority, a city attorney, county counsel, district attorney, or the Attorney General may maintain a civil or criminal prosecution consistent with their authority. In addition, nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of any person to maintain any civil action otherwise authorized by law.
(2)The department shall inform the local health officer and the director of environmental health of a county, city, or district, and the unified program agency for the jurisdiction, of any unlawful disposal of materials that are regulated under Section 25095.20 or 25095.21 of this chapter, and of any enforcement action undertaken against a metal shredding facility within the unified program agencys jurisdiction as a result of that unlawful disposal. Notice shall be provided within 15 days after the department becomes aware of the violation, and the department shall coordinate with the unified program agency regarding the violation.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.Section 25150.87 of the Health and Safety Code is amended to read:25150.87.(a)(1)The department shall require metal shredding facilities, as defined in Section 25095.1, that are subject to Section 41514.6 and this section, to do both of the following:
(A)Monitor hazardous waste constituents requested by the department.
(B)Report the results of the monitoring required pursuant to subparagraph (A) to the department. The facilities may also report those results to the local public health department.
(2)The department shall collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste.
(b)All metal shredding facilities subject to this section shall implement the facilitywide fence-line hazardous waste constituent monitoring requirements developed pursuant to this section.
(c)On or before July 1, 2027, the department shall develop a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring pursuant to paragraph (1) of subdivision (a) indicates any release of light fibrous material.
(d)On or before January 1, 2027, the department shall develop regulations to implement, interpret, or make specific this section.
(e)The department shall oversee and enforce the implementation of subdivision (a) pursuant to Article 8 (commencing with Section 25180).
(f)Any reasonable regulatory costs incurred by the department in implementing this section may be reimbursed by the fee on metal shredding facilities imposed pursuant to subdivision (a) of Section 25095.50.
SEC. 7.Section 41514.6 of the Health and Safety Code is amended to read:41514.6.(a)On or before January 1, 2027, a district the jurisdiction of which includes metal shredding facilities, in consultation with the Department of Toxic Substances Control and the Office of Environmental Health Hazard Assessment, shall develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities, as defined in Section 25095.1, that are subject to Section 25095.50 and this section.
(b)The requirements developed pursuant to subdivision (a) shall include, but not be limited to, all of the following:
(1)Development of threshold levels, in consultation with the Office of Environmental Health Hazard Assessment, for airborne contaminants, including, but not limited to, lead, zinc, cadmium, and nickel, at the fence lines of metal shredding facilities that are protective of air quality and public health. The threshold levels shall follow health guidance values adopted by the Office of Environmental Health Hazard Assessment, if available.
(2)Development of threshold levels for community notification of potential adverse impact on public health based on the threshold values developed pursuant to paragraph (1).
(3)Development of actions, in consultation with the Department of Toxic Substances Control, to be taken by metal shredding facilities if threshold levels developed pursuant to paragraph (1) are exceeded, and a method of enforcing those actions.
(4)Development of community notification procedures to inform the public in areas in which the metal shredding facility is located, if the monitoring required pursuant to this subdivision indicates the threshold levels developed pursuant to paragraph (2) were exceeded.
(5)Reporting the results of the monitoring required pursuant to this subdivision to the district and the local public health department.
(c)All metal shredding facilities subject to this section shall implement the facilitywide fence-line air quality monitoring developed pursuant to this section.
(d)On or before July 1, 2027, a district the jurisdiction of which includes metal shredding facilities shall adopt regulations to implement, interpret, or make specific the requirements pursuant to this section.
(e)A district the jurisdiction of which includes metal shredding facilities shall oversee and enforce the compliance of metal shredding facilities with regulations adopted pursuant to subdivision (d).
(f)Any reasonable regulatory costs incurred by a district in implementing this section may be reimbursed pursuant to its fee authority.
(g)The Office of Environmental Health Hazard Assessments costs to implement this section shall be reimbursed from the subaccount established in the Hazardous Waste Control Account pursuant to Section 25095.50.
SEC. 8.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 9.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry, and to individual facilities based on their size and nature of operations, while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Protects public health and the environment and all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(b)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(c)Department means the Department of Toxic Substances Control.
(d)Effective date means the date that this chapter becomes operative.
(e)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(f)Feeder yard means a metal recycling facility that collects, sorts, or processes scrap metal, through means other than the use of a hammer mill, from which scrap metal is sold to customers or transferred to a metal shredding facility for further processing and recycling.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
(s)Small metal shredding facility means a facility that processes no more than 250 tons per day or 65,000 tons per year of metallic feedstock materials using a stationary hammer mill and meets each of the following conditions:
(1)The facility does not shred whole end-of-life vehicles, whole agricultural equipment, or whole white goods.
(2)The facility does not conduct on-site chemical treatment of metal shredder residue.
(3)The facility does not conduct any activity that requires the use of an on-site thermal oxidizer.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities. However, this chapter does not alter or override the authority of the department or a unified program agency, as defined in Section 25404, to regulate hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the effective date, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the effective date, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Care Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations or to a specific provision of Chapter 6.5 (commencing with Section 25100) shall be understood to apply the technical requirements of those regulations or standards to metal processing operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a unified program agency, as defined in Section 25404, or the authority of a local environmental health department that is not a unified program agency to regulate any activity at a metal shredding facility that falls within the scope of the agencys jurisdiction under existing law.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
25095.8.(a)Except as otherwise expressly defined in this chapter or regulations implementing this chapter, all terms in this chapter that are defined in Article 2 (commencing with Section 25110) of Chapter 6.5 or its implementing regulations shall have the meanings provided in Article 2 (commencing with Section 25110) of Chapter 6.5 and its implementing regulations.
(b)(1)Any reference in this chapter to a requirement of Chapter 6.5 (commencing with Section 25100) or to the regulations in Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations applies to metal processing operations authorized pursuant to this chapter.
(2)Any reference in this chapter to a requirement of Chapter 6.5 (commencing with Section 25100) or to the regulations in Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, terms relating to hazardous waste apply to materials listed in Section 25095.20 and 25095.21.3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and the schedule for any interim measures or controls issued pursuant to subdivision (h) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Without exception, the facility shall have developed and shall continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply to the department for a permit pursuant to this chapter no later than six months following submittal of the notice of intent, except a small metal shredding facility shall apply for a permit no later than one year following submittal of the notice of intent. In all cases, the application shall include all of the following information:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, as specified in paragraph (3) of subdivision (a) of Section 25095.13 including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A plan for the prevention, detection, and response to fires that includes, at a minimum, provisions for the continuous monitoring of stockpiles of shredder feedstock and metal shredder aggregate for increases in temperature, periodic fire patrols, regular watering of feedstock and aggregate piles, availability of adequate water supplies, water pressure and fire-fighting equipment at the facility, maintenance of fire lanes, and operator training in fire prevention, detection, and response.
(D)A closure plan.
(E)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill.
(F)An inventory management plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(G)A facility security plan consistent with the requirements of Section 66265.14 of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(N)A training plan that addresses each of the following areas:
(i)Prevention of releases of metal shredder aggregate, including light fibrous material, and metal shredder residue.
(ii)Fire prevention, detection, and suppression.
(iii)Response to natural disasters, such as earthquakes, wildfires, and floods.
(iv)Emergency response procedures and notification.
(v)Inventory management.
(3)The department shall post all information provided by the owner or operator of a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. For purposes of this subdivision, the department shall consider an application to be complete if it includes each of the plans and other information specified in subdivision (a). Failure of the owner or operator to provide a complete permit application within one year shall be grounds for the department to initiate denial of the application, subject to the following:
(A)The three-year period for review of an application may be extended as necessary for completion of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) process.
(B)If the department does not complete the permit process and issue the permit within three years, the department shall provide written notice to the public, setting forth an explanation for the delay, and shall conduct a public meeting upon request.
(C)If the owner or operator of a facility has timely submitted a complete application and responded to any additional requests for information from the department, the facility may continue to operate, subject to all requirements applicable to the facility under this chapter, pending final action on its permit application even if the department does not complete the permit review process within the timeframe specified in this paragraph.
(5)The owner or operator shall comply with the provisions of each plan required under paragraph (2) as approved by the department and incorporated into the permit for the facility. The department shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(6)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(7)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, and the specific terms and conditions to be included in the permit, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(8)The department shall also conduct at least one site visit to the applicants facility after receipt of the permit application.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance, using a form of communication preferred by the community, and be held in an accessible location at a convenient time. The applicant shall invite the department and other regulatory agencies with jurisdiction over the metal shredding facility.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process, including the owner owners or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
(i)The department shall post on its internet website general information about each metal shredding facility that has applied for or obtained a permit under this chapter, including without limitation the facilitys current permit status, a schedule for issuance of a draft permit and associated public meetings and opportunity for public comment periods, and a summary of the facilitys compliance history subsequent to the effective date.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments final permit decision, subject to all of the following requirements specified in this section. Failure to meet the requirements of this section shall be subject to enforcement under Article 8 (commencing with Section 25095.60).
(a)(1)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with, including without limitation provisions applicable to management of metal shredder aggregate, light fibrous material, and metal shredder residue, and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(2)Plans shall be submitted along with the permit application required in subdivision (b) of Section 25095.10.
(b)On or before the effective date, the owner or operator complies with the requirements set forth in subdivision (b) of Section 25095.13. A copy of the fire response plan shall be submitted to the department within seven days of the effective date and shall be subject to review and approval of the department after consultation with the facility and the local fire department of the jurisdiction where the facility is located.
(c)On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(d)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations, except that a small metal shredding facility may submit the financial assurance mechanism within 90 days after the permit application is submitted.
(e)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(f)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all hazardous wastes generated at the facility.
(g)The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department, a unified program agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste or hazardous waste constituents.
(3)Metal shredder residue.
(4)Chemically treated metal shredder residue.
(h)The owner or operator complies with the following standards:
(1)Containment areas shall be in good condition; if there is a leak, contents shall be immediately transferred.
(2)Accumulation areas shall be inspected at least weekly.
(3)Containment areas shall be visibly labeled with contents and start date of accumulation. If labeling is infeasible, a record of the start dates of accumulation shall be maintained and made available to the public upon request.
(4)Incompatible materials shall not be kept together.
(5)All emergency equipment shall be regularly tested or maintained according to manufacturer standards.
(6)Employees shall have unimpeded access to emergency materials.
(7)There shall be at least one person on premises or on call at all times.
(8)Personnel training shall be required for emergency procedures for all possible emergencies and prevention requirements and shall include job specific and general awareness training.
(i)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements and a reasonable schedule for compliance with those measures.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)(1)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(2)The owner or operator shall take precautions to prevent accidental ignition or reaction of material that exhibits the characteristics of ignitability or reactivity. While ignitable or reactive material is being handled, the owner or operator shall confine smoking and open flame to specially designated locations. No Smoking signs shall be conspicuously placed wherever there is a hazard from ignitable or reactive material.
(3)The transfer, treatment, storage, or disposal of ignitable or reactive material shall be conducted so that it does not do any of the following:
(A)Generate extreme heat or pressure, fire or explosion, or violent reaction.
(B)Produce uncontrolled toxic mists, fumes, dusts, or gases in sufficient quantities to threaten human health or the environment.
(C)Produce uncontrolled flammable fumes or gases in sufficient quantities to pose a risk of fire or explosions.
(D)Damage the structural integrity of the device or facility containing the material.
(E)Any other activity similar to those listed in subparagraphs (A) to (D), inclusive, that threatens human health or the environment.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(M)Materials requiring special handling, as defined in Section 42167 of the Public Resources Code.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100) and its implementing regulations.
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(H)Records of offsite transportation of metal shredder aggregate and CTMSR.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with all of the following:
(1)Subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(2)The contingency plan as required in subparagraph (C) of paragraph (1) of subdivision (d).
(3)As applicable, Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(4)Article 16 (commencing with Section 66265.370) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
(g)The owner or operator of a metal shredding facility shall provide written notice to the department at least 60 days before transferring ownership or operation of the facility.
(h)The owner or operator shall prevent the unknowing entry, and prevent unauthorized entry, of persons or livestock onto the active portion of the facility.
(i)For any new construction at a facility located in a 100-year floodplain or within the maximum high tide, the facility shall take all reasonable and feasible precautions to prevent washout of any hazardous materials.
(j)For any new construction at a facility, the facility shall take all reasonable and feasible precautions to withstand the maximum credible earthquake.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A copy of a general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations, and, as applicable, complies with the specific requirements in subdivision (i) of Section 66264.193, and Sections 66264.195, 66264.226, 66264.273, 66264.303, 66264.602, 66264.1033, 66264.1052, 66264.1053, 66264.1058, 66264.1084, 66264.1085, 66264.1086, 66265.1088, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material and metal shredder residue may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of shredder feedstock and metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (E) of paragraph (2) of subdivision (b).
(5)Standards for the installation and maintenance of paving with concrete, steel plate, or other surfacing materials approved by the department that are designed to prevent infiltration and to collect and route water to a water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Procedures for response to incipient fires and access to adequate water, water pressure, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments, the unified program agency, if other than the fire department, and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)Monitoring of temperatures on all feedstock and metal shredder aggregate piles, using an infrared camera or other equivalent equipment that continuously monitors the temperature of feedstock and aggregate piles and provides an alarm or other indication of temperature increases outside normal range.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles, including typical periods of breakdown, maintenance, and repair. The following limits shall apply:
(i)No individual stockpile of feedstock shall exceed the amount of material that can be processed within a 24-hour period.
(ii)No individual pile of metal shredder aggregate shall exceed the amount of material that can be processed within a 48-hour period.
(iii)No individual pile of feedstock or metal shredder aggregate shall remain inactive for more than 48 hours except during periods when the facility is closed or not operating. Periods of breakdown, maintenance and repair, or under other circumstances specified in the facilitys approved inventory management plan, shall not be included in calculating the 48-hour period. A pile shall not be considered inactive if the majority of the material in the pile is removed over a period of 48 hours. In the event of an incident that is required to be reported to the department under Section 25095.31, the department may reduce the number of hours that a pile of feedstock or metal shredder aggregate may remain inactive until the owner or operator demonstrates to the satisfaction of the department and the local fire department that the risk of fire has been mitigated.
(iv)During any period of breakdown and associated repair that exceeds 72 hours, the feedstock and metal shredder aggregate piles shall be subject to additional controls as specified in the facilitys approved inventory management plan. Any shredder feedstock accepted by the facility during a period of breakdown, maintenance, or repair exceeding 72 hours shall be managed in accordance with the facilitys approved inventory management plan.
(v)All feedstock and metal shredder aggregate piles shall be subject to continuous 24-hour onsite surveillance, including when the facility is not operating, and such other additional controls specified in the facilitys approved fire response plan. All electronic surveillance data shall be maintained for a period of at least 14 days following any incident that is required to be reported to the department under Section 25095.31.
(F)Provisions for capture and management of fire suppression water as necessary to prevent discharge into storm drains or runoff into surface water.
(G)Requirement for at least one person to be present at the facility or on call at all times.
(3)The department, in coordination with the local fire department of the jurisdiction where the metal shredding facility is located, shall review a facilitys fire response plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)Except as provided in subdivision (d), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains substantial compliance with this chapter and the owner or operator provides the department with written notice of these changes within 30 days of making the changes. The department shall post the notice on the section of its internet website that provides information regarding metal shredding facilities.
(c)The department shall evaluate the information provided in the notice from the facility pursuant to this subdivision, as well as any objections from the public, to assess whether the modification could result in a potentially significant impact on the environment. If the department determines that the modification could have a potentially significant impact on the environment, the owner or operator of the facility shall be required to implement changes to the modification as necessary to mitigate the impact to the extent feasible.
(d)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(e)(1)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(2)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to subdivision (b) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(3)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (1) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be included in the annual report submitted to the department pursuant to Section 25095.14.
(4)Any liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys recycled water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department, the unified program agency, and the local fire department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain liability insurance in accordance with Section 34631.5 of the Vehicle Code. A transporter shall cease to transport metal shredder aggregate upon loss of liability coverage.
(f)The owner or operator of the originating facility shall include in the annual report submitted to the department under Section 25095.14 the total tonnage of metal shredder aggregate that was shipped to another recycling facility for processing during the calendar year, the name of each transporter used for this purpose, the bill of lading numbers, and the total tonnage transported by that transporter during the calendar year, and the name and location of the facilities that processed the material. The department shall handle the information in a manner consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Section 25095.10 or 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The vehicle of railcar used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous materials or wastes that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations, the unified program agency, and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how the equipment and areas used for processing metal shredder aggregate and for treating metal shredder residue will be closed. The description shall identify the maximum extent of the operation during the life of the equipment or area and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of metal shredder aggregate and metal shredder residue in storage and in treatment at any time during the operation of the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate an area, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)The facility has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, the equipment or area, closure of the equipment and area would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department consistent with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
(e)If the facility is required to implement postclosure care following closure of the facility, the owner or operator shall provide a financial assurance mechanism for postclosure using one or more of the financial mechanisms described in Section 66265.145 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The following definitions shall apply for purposes of this article:
(1)Fee rate means the rate to be set by the department for the 202627 fiscal year, as annually adjusted by the Board of Environmental Safety beginning in the 202728 fiscal year and thereafter pursuant to subdivision (b).
(2)Fee schedule means the fee structure established in regulations by the department pursuant to subdivision (b) using the criteria in subdivision (c).
(b)(1)Beginning in the 202728 fiscal year, the rates established by the department shall be reviewed and shall be increased or decreased annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department and the Office of Environmental Health Hazard Assessment to implement this chapter as described in this section.
(2)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations to administer this fee and to establish a fee schedule and rate that is sufficient to cover the departments reasonable costs to implement this chapter and Sections 25150.87 and 41514.6, excluding the costs described in Section 25095.51.
(3)The fee rate shall include, but not be limited to, the costs of fee administration, the costs of collection of the fee, the departments administrative costs, and statewide general administrative costs related to implementation of this chapter and Sections 25150.87 and 41514.6.
(4)The fee rate shall allow for a reserve in the fund each year at an amount sufficient to ensure that all programs funded by the subaccount will not be adversely affected by revenue shortfalls or baseline expenditure adjustments and does not exceed 10 percent of the authorized expenditure levels.
(5)The fees established pursuant to this section shall also be sufficient to cover the Office of Environmental Health Hazard Assessments reasonable costs to implement Sections 25150.87 and 41514.6.
(c)In establishing fee schedule that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) (5) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of feedstock that is shredded on an annual basis.
(4)The types of feedstock that are shredded at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(d)The Controller shall establish a new and separate Metal Shredding Facility Subaccount in the Hazardous Waste Control Account. The Metal Shredding Facility Subaccount shall be administered by the Director of Toxic Substances Control. The fees collected pursuant to this section shall be deposited into the Metal Shredding Facility Subaccount and be available for expenditure by the department and the Office of Environmental Health Hazard Assessment, upon appropriation by the Legislature, solely for the purpose of implementation and administration of this chapter and Sections 25150.87 and 41514.6. The Director of Finance, upon request of the Director of Toxic Substances Control, may make a loan from the General Fund to the Metal Shredding Facility Subaccount to meet cash needs. The loan shall be subject to the repayment provisions of Section 16351 of the Government Code and the interest provisions of Section 16314 of the Government Code.
(e)(1)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department or the Board of Environmental Safety pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department or the Board of Environmental Safety, whichever occurs sooner.
(2)Before adopting a regulation pursuant to this section, the department shall hold at least two public hearings regarding the proposed regulation, including one public hearing dedicated to assessing the impact of the proposed regulation on small metal shredding facilities as defined in this chapter.
(f)(1)A metal shredding facility paying an annual fee in accordance with this section is not subject to any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production, transportation, and processing of metal shredder aggregate, the generation, handling, and management, transportation, and disposal of nonhazardous metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is subject to the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
25095.51.(a)(1)(A)A person who applies for a metal shredding facility permit under this chapter shall enter into a written agreement with the department pursuant to which that person shall reimburse the department for the direct costs reasonably incurred by the department in processing the permit application. The fee shall be sufficient to cover the departments review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit. The permit fee shall be established on the basis of the same factors listed in subdivision (b) of Section 25095.50.
(B)The fee shall be in addition to and separate from the annual fee assessed pursuant to Section 25095.50.
(2)An agreement required pursuant to paragraph (1) shall provide for a 25-percent deposit to be made with the submittal of the application. The 25-percent advance payment shall be based upon the departments total estimated costs of processing the application.
(b)(1)Pursuant to Section 21089 of the Public Resources Code, an applicant for a metal shredding facility permit shall also pay all costs incurred by the department for purposes of complying with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), in conjunction with the application.
(2)Paragraph (1) does not apply to projects that are exempt from CEQA.
(c)Funds received pursuant to this section shall be placed in the Metal Shredding Facility Subaccount specified in subdivision (d) of Section 25095.50 and be available for expenditure by the department, upon appropriation by the Legislature, solely for the purposes of implementation and administration of this chapter and Sections 25150.87 and 41514.6.
8.Enforcement25095.60.(a)The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and implementing regulations set forth in Article 3 (commencing with Section 25095.10) of Chapter 22 of Division 4.5 of Title 22 California Code of Regulations may be used to enforce this chapter, including, but not limited to, the authority to conduct inspections and pursue administrative or judicial enforcement for violations of this chapter and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment, and to deny an application for a permit for any of the reasons set forth in paragraph (1) of subdivision (a) of Section 25095.61. These enforcement mechanisms shall apply to violations of this chapter relating to the management of materials listed in subdivision (a) of Sections 25095.20 and 25095.21.
(b)(1)The department may order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, if the owner or operator fails to develop and implement a fire response plan as required by paragraphs (1) and (2) of subdivision (b) of Section 25095.13. The owner or operator may resume shredder operations and receipt of feedstock immediately upon providing written confirmation to the department that the facility is operating in accordance with a fire response plan.
(2)The department may prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. So long as the owner or operator of the facility has developed and is implementing a fire response plan, the facility may continue to conduct metal shredding operations and metal processing operations to reduce the inventory of shredder feedstock or metal shredder aggregate, as appropriate, and may resume receipt of feedstock at the facility immediately upon providing written confirmation to the department compliance with the limitations on pile size and duration have been achieved.
(c)The department shall conduct an annual compliance evaluation inspection of each metal shredding facility regulated under this chapter. The unified program agency or local environmental health official shall be allowed to participate in the inspection.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, modification, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(6)Any person who submitted written comments on the draft permit may file an appeal of the departments final permit decision with the Office of Administrative Hearings, pursuant to Chapter 5 (commencing with Section 11500) of Part I of Division 3 of Title 22 of the Government Code. An appeal filed pursuant to this paragraph shall be limited to those conditions of the final permit that were included in the persons written comments to the department during the public comment period.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)(1)The department shall have primary responsibility for enforcement of the terms of this chapter and may refer violations of this chapter to a district attorney or the Attorney General for prosecution. Notwithstanding this authority, a city attorney, county counsel, district attorney, or the Attorney General may maintain a civil or criminal prosecution consistent with their authority. In addition, nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of or of any person to maintain any civil action otherwise authorized by law.
(2)The department shall inform the local health officer and the director of environmental health of a county, city, or district, and the unified program agency for the jurisdiction, of any unlawful disposal of materials that are regulated under Section 25095.20 or 25095.21 of this chapter, and of any enforcement action undertaken against a metal shredding facility within the unified program agencys jurisdiction as a result of that unlawful disposal. Notice shall be provided within 15 days after the department becomes aware of the violation, and the department shall coordinate with the unified program agency regarding the violation.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.Section 25150.87 of the Health and Safety Code is amended to read:25150.87.(a)(1)The department shall require metal shredding facilities, as defined in Section 25095.1, that are subject to Section 41514.6 and this section, to do both of the following:
(A)Monitor hazardous waste constituents requested by the department.
(B)Report the results of the monitoring required pursuant to subparagraph (A) to the department. The facilities may also report those results to the local public health department.
(2)The department shall collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste.
(b)All metal shredding facilities subject to this section shall implement the facilitywide fence-line hazardous waste constituent monitoring requirements developed pursuant to this section.
(c)On or before July 1, 2027, the department shall develop a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring pursuant to paragraph (1) of subdivision (a) indicates any release of light fibrous material.
(d)On or before January 1, 2027, the department shall develop regulations to implement, interpret, or make specific this section.
(e)The department shall oversee and enforce the implementation of subdivision (a) pursuant to Article 8 (commencing with Section 25180).
(f)Any reasonable regulatory costs incurred by the department in implementing this section may be reimbursed by the fee on metal shredding facilities imposed pursuant to subdivision (a) of Section 25095.50.
SEC. 7.Section 41514.6 of the Health and Safety Code is amended to read:41514.6.(a)On or before January 1, 2027, a district the jurisdiction of which includes metal shredding facilities, in consultation with the Department of Toxic Substances Control and the Office of Environmental Health Hazard Assessment, shall develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities, as defined in Section 25095.1, that are subject to Section 25095.50 and this section.
(b)The requirements developed pursuant to subdivision (a) shall include, but not be limited to, all of the following:
(1)Development of threshold levels, in consultation with the Office of Environmental Health Hazard Assessment, for airborne contaminants, including, but not limited to, lead, zinc, cadmium, and nickel, at the fence lines of metal shredding facilities that are protective of air quality and public health. The threshold levels shall follow health guidance values adopted by the Office of Environmental Health Hazard Assessment, if available.
(2)Development of threshold levels for community notification of potential adverse impact on public health based on the threshold values developed pursuant to paragraph (1).
(3)Development of actions, in consultation with the Department of Toxic Substances Control, to be taken by metal shredding facilities if threshold levels developed pursuant to paragraph (1) are exceeded, and a method of enforcing those actions.
(4)Development of community notification procedures to inform the public in areas in which the metal shredding facility is located, if the monitoring required pursuant to this subdivision indicates the threshold levels developed pursuant to paragraph (2) were exceeded.
(5)Reporting the results of the monitoring required pursuant to this subdivision to the district and the local public health department.
(c)All metal shredding facilities subject to this section shall implement the facilitywide fence-line air quality monitoring developed pursuant to this section.
(d)On or before July 1, 2027, a district the jurisdiction of which includes metal shredding facilities shall adopt regulations to implement, interpret, or make specific the requirements pursuant to this section.
(e)A district the jurisdiction of which includes metal shredding facilities shall oversee and enforce the compliance of metal shredding facilities with regulations adopted pursuant to subdivision (d).
(f)Any reasonable regulatory costs incurred by a district in implementing this section may be reimbursed pursuant to its fee authority.
(g)The Office of Environmental Health Hazard Assessments costs to implement this section shall be reimbursed from the subaccount established in the Hazardous Waste Control Account pursuant to Section 25095.50.
SEC. 8.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 9.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry industry, and to individual facilities based on their size and nature of operations, while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Protects public health and the environment and all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter. (b)(a)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)(b)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)(c)Department means the Department of Toxic Substances Control.
(e)(d)Effective date means the date that this chapter becomes operative.
(f)(e)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)(f)Feeder yard means a metal recycling facility that collects, sorts, or processes scrap metal, through means other than the use of a hammer mill, from which scrap metal is sold to customers or transferred to a metal shredding facility for further processing and recycling.
(h)(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(i)(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(j)(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(k)(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(l)(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(m)(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(n)(m)Metal shredding facility means the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(o)(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter. date.
(p)(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(q)(p)Owner means a person who owns a metal shredding facility in whole or in part.
(r)(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(s)(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
(s)Small metal shredding facility means a facility that processes no more than 250 tons per day or 65,000 tons per year of metallic feedstock materials using a stationary hammer mill and meets each of the following conditions:
(1)The facility does not shred whole end-of-life vehicles, whole agricultural equipment, or whole white goods.
(2)The facility does not conduct on-site chemical treatment of metal shredder residue.
(3)The facility does not conduct any activity that requires the use of an on-site thermal oxidizer.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities. However, this chapter does not alter or override the authority of the department or a Unified Program Agency, unified program agency, as defined in Section 25404, to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the effective date of this chapter, date, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the effective date of this chapter, date, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations or to a specific provision of Chapter 6.5 (commencing with Section 25100) shall be understood to apply the technical requirements of the regulation those regulations or standards to metal shredding processing operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a Unified Program unified program Agency, agency, as defined in Section 25404, or the authority of a local environmental health department that is not a Unified Program unified program Agency. agency to regulate any activity at a metal shredding facility that falls within the scope of the agencys jurisdiction under existing law.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
25095.8.(a)Except as otherwise expressly defined in this chapter or regulations implementing this chapter, all terms in this chapter that are defined in Article 2 (commencing with Section 25110) of Chapter 6.5 or its implementing regulations shall have the meanings provided in Article 2 (commencing with Section 25110) of Chapter 6.5 and its implementing regulations.
(b)(1)Any reference in this chapter to a requirement of Chapter 6.5 (commencing with Section 25100) or to the regulations in Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations applies to metal processing operations authorized pursuant to this chapter.
(2)Any reference in this chapter to a requirement of Chapter 6.5 (commencing with Section 25100) or to the regulations in Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, terms relating to hazardous waste apply to materials listed in Section 25095.20 and 25095.21.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and the schedule for any interim measures or controls issued pursuant to subdivision (h) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Without exception, the facility shall have developed and shall continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply to the department for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and intent, except a small metal shredding facility shall apply for a permit no later than one year following submittal of the notice of intent. In all cases, the application shall provide include all of the following information to the department: information:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, plan, as specified in paragraph (3) of subdivision (a) of Section 25095.13 including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A plan for the prevention, detection, and response to fires. fires that includes, at a minimum, provisions for the continuous monitoring of stockpiles of shredder feedstock and metal shredder aggregate for increases in temperature, periodic fire patrols, regular watering of feedstock and aggregate piles, availability of adequate water supplies, water pressure and fire-fighting equipment at the facility, maintenance of fire lanes, and operator training in fire prevention, detection, and response.
(D)A closure plan.
(E)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill.
(F)An inventory management plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(G)A facility security plan consistent with the requirements of Section 66265.14 of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(N)A training plan that addresses each of the following areas:
(i)Prevention of releases of metal shredder aggregate, including light fibrous material, and metal shredder residue.
(ii)Fire prevention, detection, and suppression.
(iii)Response to natural disasters, such as earthquakes, wildfires, and floods.
(iv)Emergency response procedures and notification.
(v)Inventory management.
(3)The department shall post all information provided by the owner or operator of a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. For purposes of this subdivision, the department shall consider an application to be complete if it includes each of the plans and other information specified in subdivision (a). Failure of the owner or operator to provide a complete permit application within one year shall be grounds for the department to initiate denial of the application, subject to the following:
(i)(A)The three-year period for review of an application may be extended as necessary for completion of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) process.
(ii)(B)If the department does not complete the permit process and issue the permit within three years, the department shall provide written notice to the public, setting forth an explanation for the delay, and shall conduct a public meeting upon request.
(iii)(C)If the owner or operator of a facility has timely submitted a complete application and responded to any additional requests for information from the department, the facility may continue to operate, subject to all requirements applicable to the facility under this chapter, pending final action on its permit application even if the department does not complete the permit review process within the timeframe specified in this paragraph.
(5)The owner or operator shall comply with the provisions of each plan required under paragraph (2) as approved by the department and incorporated into the permit for the facility. The department shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(6)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(7)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, and the specific terms and conditions to be included in the permit, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(8)The department shall also conduct at least one site visit to the applicants facility after receipt of the permit application.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance, using a form of communication preferred by the community, and be held in an accessible location at a convenient time. The applicant shall invite the department and other regulatory agencies with jurisdiction over the metal shredding facility.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process, including the owner or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
(i)The department shall post on its internet website general information about each metal shredding facility that has applied for or obtained a permit under this chapter, including without limitation the facilitys current permit status, a schedule for issuance of a draft permit and associated public meetings and opportunity for public comment periods, and a summary of the facilitys compliance history subsequent to the effective date.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the final permit application, decision, subject to all of the following requirements: requirements specified in this section. Failure to meet the requirements of this section shall be subject to enforcement under Article 8 (commencing with Section 25095.60).
(a)(1)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with with, including without limitation provisions applicable to management of metal shredder aggregate, light fibrous material, and metal shredder residue, and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(2)Plans shall be submitted along with the permit application required in subdivision (b) of Section 25095.10.
(b)On or before the effective date, the owner or operator hasdeveloped and implements a written plan for the prevention, detection, and response to fires that meets the requirements of paragraphs (1) and (2) of complies with the requirements set forth in subdivision (b) of Section 25095.13. A copy of the fire response plan shall be submitted to the department within seven days of the effective date and shall be subject to review and approval of the department after consultation with the facility and the local fire department of the jurisdiction where the facility is located.
(c)On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(d)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations. Regulations, except that a small metal shredding facility may submit the financial assurance mechanism within 90 days after the permit application is submitted.
(e)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(f)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes generated at the facility.
(g)The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department, a Unified Program Agency, unified program agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste or hazardous waste constituents.
(3)Metal shredder residue.
(4)Chemically treated metal shredder residue.
(h)The owner or operator complies with the following standards:
(1)Containment areas shall be in good condition; if there is a leak, contents shall be immediately transferred.
(2)Accumulation areas shall be inspected at least weekly.
(3)Containment areas shall be visibly labeled with contents and start date of accumulation. If labeling is infeasible, a record of the start dates of accumulation shall be maintained and made available to the public upon request.
(4)Incompatible materials shall not be kept together.
(5)All emergency equipment shall be regularly tested or maintained according to manufacturer standards.
(6)Employees shall have unimpeded access to emergency materials.
(7)There shall be at least one person on premises or on call at all times.
(8)Personnel training shall be required for emergency procedures for all possible emergencies and prevention requirements and shall include job specific and general awareness training.
(h)(i)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements and a reasonable schedule for compliance with those measures.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)(1)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(2)The owner or operator shall take precautions to prevent accidental ignition or reaction of material that exhibits the characteristics of ignitability or reactivity. While ignitable or reactive material is being handled, the owner or operator shall confine smoking and open flame to specially designated locations. No Smoking signs shall be conspicuously placed wherever there is a hazard from ignitable or reactive material.
(3)The transfer, treatment, storage, or disposal of ignitable or reactive material shall be conducted so that it does not do any of the following:
(A)Generate extreme heat or pressure, fire or explosion, or violent reaction.
(B)Produce uncontrolled toxic mists, fumes, dusts, or gases in sufficient quantities to threaten human health or the environment.
(C)Produce uncontrolled flammable fumes or gases in sufficient quantities to pose a risk of fire or explosions.
(D)Damage the structural integrity of the device or facility containing the material.
(E)Any other activity similar to those listed in subparagraphs (A) to (D), inclusive, that threatens human health or the environment.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(M)Materials requiring special handling, as defined in Section 42167 of the Public Resources Code.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100). 25100) and its implementing regulations.
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(H)Records of offsite transportation of metal shredder aggregate and CTMSR.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision all of the following:
(1)Subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(2)The contingency plan as required in subparagraph (C) of paragraph (1) of subdivision (d).
(3)As applicable, Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(4)Article 16 (commencing with Section 66265.370) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
(g)The owner or operator of a metal shredding facility shall provide written notice to the department at least 60 days before transferring ownership or operation of the facility.
(h)The owner or operator shall prevent the unknowing entry, and prevent unauthorized entry, of persons or livestock onto the active portion of the facility.
(i)For any new construction at a facility located in a 100-year floodplain or within the maximum high tide, the facility shall take all reasonable and feasible precautions to prevent washout of any hazardous materials.
(j)For any new construction at a facility, the facility shall take all reasonable and feasible precautions to withstand the maximum credible earthquake.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A copy of a general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations. Regulations, and, as applicable, complies with the specific requirements in subdivision (i) of Section 66264.193, and Sections 66264.195, 66264.226, 66264.273, 66264.303, 66264.602, 66264.1033, 66264.1052, 66264.1053, 66264.1058, 66264.1084, 66264.1085, 66264.1086, 66265.1088, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material and metal shredder residue may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of shredder feedstock and metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (E) of paragraph (2) of subdivision (b).
(5)Standards for the installation and maintenance of paving with concrete, steel plate, or other surfacing materials approved by the department that are designed to prevent infiltration and to collect and route water to a water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Procedures for response to incipient fires and access to adequate water, water pressure, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments departments, the unified program agency, if other than the fire department, and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)Monitoring of temperatures on all feedstock and metal shredder aggregate piles, using an infrared camera or other equivalent equipment that continuously monitors the temperature of feedstock and aggregate piles and provides an alarm or other indication of temperature increases outside normal range.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles, including typical periods of breakdown, maintenance, and repair. The following limits shall apply:
(i)No individual stockpile of feedstock shall exceed the amount of material that can be processed within a 24-hour period.
(ii)No individual pile of metal shredder aggregate shall exceed the amount of material that can be processed within a 48-hour period.
(iii)No individual pile of feedstock or metal shredder aggregate shall remain inactive for more than 48 hours except during periods when the facility is closed or not operating. Periods of breakdown, maintenance and repair, or under other circumstances specified in the facilitys approved inventory management plan, shall not be included in calculating the 48-hour period. A pile shall not be considered inactive if the majority of the material in the pile is removed over a period of 48 hours. In the event of an incident that is required to be reported to the department under Section 25095.31, the department may reduce the number of hours that a pile of feedstock or metal shredder aggregate may remain inactive until the owner or operator demonstrates to the satisfaction of the department and the local fire department that the risk of fire has been mitigated.
(iv)During any period of breakdown and associated repair that exceeds 72 hours, the feedstock and metal shredder aggregate piles shall be subject to additional controls as specified in the facilitys approved inventory management plan. Any shredder feedstock accepted by the facility during a period of breakdown, maintenance, or repair exceeding 72 hours shall be managed in accordance with the facilitys approved inventory management plan.
(iii)(v)All feedstock and metal shredder aggregate piles shall be subject to continuous 24-hour onsite surveillance, including when the facility is not operating, and such other additional controls specified in the facilitys approved fire response plan. All electronic surveillance data shall be maintained for a period of at least 14 days following any incident that is required to be reported to the department under Section 25095.31.
(F)Provisions for capture and management of fire suppression water as necessary to prevent discharge into storm drains or runoff into surface water.
(G)Requirement for at least one person to be present at the facility or on call at all times.
(3)The department, in coordination with the local fire department of the jurisdiction where the metal shredding facility is located, shall review a facilitys fire response plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)Except as provided in subdivision (d), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains substantial compliance with this chapter and the owner or operator provides the department with written notice of these changes within 30 days of making the changes. The department shall post the notice on the section of its internet website that provides information regarding metal shredding facilities.
(c)The department shall evaluate the information provided in the notice from the facility pursuant to this subdivision, as well as any objections from the public, to assess whether the modification could result in a potentially significant impact on the environment. If the department determines that the modification could have a potentially significant impact on the environment, the owner or operator of the facility shall be required to implement changes to the modification as necessary to mitigate the impact to the extent feasible.
(d)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(e)(1)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(2)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to subdivision (b) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(3)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (1) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with included in the annual report submitted to the department pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys recycled water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department department, the unified program agency, and the local fire department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department. liability insurance in accordance with Section 34631.5 of the Vehicle Code. A transporter shall cease to transport metal shredder aggregate upon loss of liability coverage.
(f)The owner or operator of the originating facility shall include in the annual report submitted to the department under Section 25095.14 the total tonnage of metal shredder aggregate that was shipped to another recycling facility for processing during the calendar year, the name of each transporter used for this purpose, the bill of lading numbers, and the total tonnage transported by that transporter during the calendar year, and the name and location of the facilities that processed the material. The department shall handle the information in a manner consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Section 25095.10 or 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container vehicle of railcar used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous materials or wastes that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations Regulations, the unified program agency, and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit the equipment and areas used for processing metal shredder aggregate and for treating metal shredder residue will be closed. The description shall identify the maximum extent of the operation during the life of the unit, equipment or area and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material metal shredder aggregate and metal shredder residue in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, an area, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit The facility has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit the equipment or area, closure of the equipment and area would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance consistent with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
(e)If the facility is required to implement postclosure care following closure of the facility, the owner or operator shall provide a financial assurance mechanism for postclosure using one or more of the financial mechanisms described in Section 66265.145 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement all aspects of this chapter, other than costs incurred in connection with the departments review and issuance of metal shredding facility permits. The fees established pursuant to this section shall also be sufficient to reimburse the departments reasonable cost to implement Sections 25150.87 and 41514.6, as applicable to metal shredding facilities, subject to this chapter. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department as described in this section.25095.50.(a)The following definitions shall apply for purposes of this article:
(1)Fee rate means the rate to be set by the department for the 202627 fiscal year, as annually adjusted by the Board of Environmental Safety beginning in the 202728 fiscal year and thereafter pursuant to subdivision (b).
(2)Fee schedule means the fee structure established in regulations by the department pursuant to subdivision (b) using the criteria in subdivision (c).
(b)(1)Beginning in the 202728 fiscal year, the rates established by the department shall be reviewed and shall be increased or decreased annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department and the Office of Environmental Health Hazard Assessment to implement this chapter as described in this section.
(2)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations to administer this fee and to establish a fee schedule and rate that is sufficient to cover the departments reasonable costs to implement this chapter and Sections 25150.87 and 41514.6, excluding the costs described in Section 25095.51.
(3)The fee rate shall include, but not be limited to, the costs of fee administration, the costs of collection of the fee, the departments administrative costs, and statewide general administrative costs related to implementation of this chapter and Sections 25150.87 and 41514.6.
(4)The fee rate shall allow for a reserve in the fund each year at an amount sufficient to ensure that all programs funded by the subaccount will not be adversely affected by revenue shortfalls or baseline expenditure adjustments and does not exceed 10 percent of the authorized expenditure levels.
(5)The fees established pursuant to this section shall also be sufficient to cover the Office of Environmental Health Hazard Assessments reasonable costs to implement Sections 25150.87 and 41514.6.
(b)(c)In establishing the amount of a fee fee schedule that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal feedstock that is processed shredded on an annual basis.
(4)The types of scrap metal feedstock that are processed shredded at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations. (c)(d)The Controller shall establish a new and separate account, the Metal Shredders Facility Account. Metal Shredding Facility Subaccount in the Hazardous Waste Control Account. The Metal Shredding Facility Subaccount shall be administered by the Director of Toxic Substances Control. The fees collected pursuant to this section shall be deposited into the Metal Shredders Shredding Facility Account Subaccount and be available for expenditure by the department, department and the Office of Environmental Health Hazard Assessment, upon appropriation by the Legislature, solely for the purpose of implementation and administration of this chapter and Sections 25150.87 and 41514.6. The Director of Finance, upon request of the Director of Toxic Substances Control, may make a loan from the General Fund to the Metal Shredding Facility Subaccount to meet cash needs. The loan shall be subject to the repayment provisions of Section 16351 of the Government Code and the interest provisions of Section 16314 of the Government Code.
(d)(e)(1)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department or the Board of Environmental Safety pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, department or the Board of Environmental Safety, whichever occurs sooner.
(2)Before adopting a regulation pursuant to this section, the department shall hold at least two public hearings regarding the proposed regulation, including one public hearing dedicated to assessing the impact of the proposed regulation on small metal shredding facilities as defined in this chapter.
(e)(f)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from is not subject to any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production production, transportation, and processing of metal shredder aggregate and aggregate, the generation, handling, treatment, and management, transportation, and disposal of untreated or treated nonhazardous metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from subject to the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
25095.51.(a)(1)(A)A person who applies for a metal shredding facility permit under this chapter shall enter into a written agreement with the department pursuant to which that person shall reimburse the department for the direct costs reasonably incurred by the department in processing the permit application. The fee shall be sufficient to cover the departments review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit. The permit fee shall be in addition to the annual fee assessed pursuant to Section 25095.50 and shall be established on the basis of the same factors listed in subdivision (b) of Section 25095.50.
(B)The fee shall be in addition to and separate from the annual fee assessed pursuant to Section 25095.50.
(2)An agreement required pursuant to paragraph (1) shall provide for a 25-percent deposit to be made with the submittal of the application. The 25-percent advance payment shall be based upon the departments total estimated costs of processing the application.
(b)(1)Pursuant to Section 21089 of the Public Resources Code, an applicant for a metal shredding facility permit shall also pay all costs incurred by the department for purposes of complying with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), in conjunction with the application.
(2)Paragraph (1) does not apply to projects that are exempt from CEQA.
(c)Reimbursements Funds received pursuant to this section shall be placed in the Metal Shredders Facility Account established pursuantto Metal Shredding Facility Subaccount specified in subdivision (d) of Section 25095.50 and be available for expenditure by the department, upon appropriation by the Legislature. Legislature, solely for the purposes of implementation and administration of this chapter and Sections 25150.87 and 41514.6.
8.Enforcement25095.60.(a)The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations set forth in Article 3 (commencing with Section 25095.10) of Chapter 22 of Division 4.5 of Title 22 California Code of Regulations may be used to enforce this chapter, including, but not limited to, the authority to conduct inspections and pursue administrative or judicial enforcement for violations of this chapter and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment, and to deny an application for a permit for any of the reasons set forth in paragraph (1) of subdivision (a) of Section 25095.61. These enforcement mechanisms shall apply to violations of this chapter relating to the management of materials listed in subdivision (a) of Section 25095.20. Sections 25095.20 and 25095.21.
(b)(1)The department may order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, if the owner or operator fails to develop and implement a fire response plan as required by paragraphs (1) and (2) of subdivision (b) of Section 25095.13. The owner or operator may resume shredder operations and receipt of feedstock immediately upon providing written confirmation to the department that the facility is operating in accordance with a fire response plan.
(2)The department may prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. So long as the owner or operator of the facility has developed and is implementing a fire response plan, the facility may continue to conduct metal shredding operations and metal processing operations to reduce the inventory of shredder feedstock or metal shredder aggregate, as appropriate, and may resume receipt of feedstock at the facility immediately upon providing written confirmation to the department compliance with the limitations on pile size and duration have been achieved.
(c)The department shall conduct an annual compliance evaluation inspection of each metal shredding facility regulated under this chapter. The unified program agency or local environmental health official shall be allowed to participate in the inspection.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, modification, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(6)Any person who submitted written comments on the draft permit may file an appeal of the departments final permit decision with the Office of Administrative Hearings, pursuant to Chapter 5 (commencing with Section 11500) of Part I of Division 3 of Title 22 of the Government Code. An appeal filed pursuant to this paragraph shall be limited to those conditions of the final permit that were included in the persons written comments to the department during the public comment period.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)A (1)The department shall have primary responsibility for enforcement of the terms of this chapter and may refer violations of this chapter to a district attorney or the Attorney General for prosecution. Notwithstanding this authority, a city attorney, county counsel, district attorney, or the Attorney General may maintain a civil or criminal prosecution to enforce this chapter, consistent with existing law and without need for a referral from the department. prosecution consistent with their authority. In addition, nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of or of any person to maintain any civil action otherwise authorized by law.
(2)The department shall inform the local health officer and the director of environmental health of a county, city, or district, and the unified program agency for the jurisdiction, of any unlawful disposal of materials that are regulated under Section 25095.20 or 25095.21 of this chapter, and of any enforcement action undertaken against a metal shredding facility within the unified program agencys jurisdiction as a result of that unlawful disposal. Notice shall be provided within 15 days after the department becomes aware of the violation, and the department shall coordinate with the unified program agency regarding the violation.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.Section 25150.87 of the Health and Safety Code is amended to read:25150.87.(a)(1)The department shall require metal shredding facilities facilities, as defined in Section 25095.1, that are subject to Section 41514.6 and this section, to do both of the following:
(A)Monitor hazardous waste constituents requested by the department.
(B)Report the results of the monitoring required pursuant to subparagraph (A) to the department. The facilities may also report those results to the local public health department.
(2)The department shall collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste.
(b)All metal shredding facilities subject to this section shall implement the facilitywide fence-line hazardous waste constituent monitoring requirements developed pursuant to this section.
(c)On or before July 1, 2027, the department shall develop a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring pursuant to paragraph (1) of subdivision (a) indicates any release of light fibrous material.
(d)On or before January 1, 2027, the department shall develop regulations to implement, interpret, or make specific this section.
(e)The department shall oversee and enforce the implementation of subdivision (a) pursuant to Article 8 (commencing with Section 25180).
(f)Any reasonable regulatory costs incurred by the department in implementing this section may be reimbursed by the fee on metal shredding facilities imposed pursuant to subdivision (a) of Section 25150.84. 25095.50.
SEC. 7.Section 41514.6 of the Health and Safety Code is amended to read:41514.6.(a)On or before January 1, 2027, a district the jurisdiction of which includes metal shredding facilities, in consultation with the Department of Toxic Substances Control and the Office of Environmental Health Hazard Assessment, shall develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities, as defined in Section 25150.82, 25095.1, that are subject to Section 25150.84 25095.50 and this section.
(b)The requirements developed pursuant to subdivision (a) shall include, but not be limited to, all of the following:
(1)Development of threshold levels, in consultation with the Office of Environmental Health Hazard Assessment, for airborne contaminants, including, but not limited to, lead, zinc, cadmium, and nickel, at the fence lines of metal shredding facilities that are protective of air quality and public health. The threshold levels shall follow health guidance values adopted by the Office of Environmental Health Hazard Assessment, if available.
(2)Development of threshold levels for community notification of potential adverse impact on public health based on the threshold values developed pursuant to paragraph (1).
(3)Development of actions, in consultation with the Department of Toxic Substances Control, to be taken by metal shredding facilities if threshold levels developed pursuant to paragraph (1) are exceeded, and a method of enforcing those actions.
(4)Development of community notification procedures to inform the public in areas in which the metal shredding facility is located, if the monitoring required pursuant to this subdivision indicates the threshold levels developed pursuant to paragraph (2) were exceeded.
(5)Reporting the results of the monitoring required pursuant to this subdivision to the district and the local public health department.
(c)All metal shredding facilities subject to this section shall implement the facilitywide fence-line air quality monitoring developed pursuant to this section.
(d)On or before July 1, 2027, a district the jurisdiction of which includes metal shredding facilities shall adopt regulations to implement, interpret, or make specific the requirements pursuant to this section.
(e)A district the jurisdiction of which includes metal shredding facilities shall oversee and enforce the compliance of metal shredding facilities with regulations adopted pursuant to subdivision (d).
(f)Any reasonable regulatory costs incurred by a district in implementing this section may be reimbursed pursuant to its fee authority.
(g)The Office of Environmental Health Hazard Assessments costs to implement this section shall be reimbursed from the subaccount established in the Hazardous Waste Control Account pursuant to Section 25150.84. 25095.50.
SEC. 6.SEC. 8.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.SEC. 9.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Protects public health and the environment and all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feeder yard means a metal recycling facility that collects, sorts, or processes scrap metal, through means other than the use of a hammer mill, from which scrap metal is sold to customers or transferred to a metal shredding facility for further processing and recycling.
(g)(h)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)(i)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)(j)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)(k)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)(l)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)(m)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)(n)Metal shredding facility means the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)(o)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)(p)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)(q)Owner means a person who owns a metal shredding facility in whole or in part.
(q)(r)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)(s)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities. However, this chapter does not alter or override the authority of the department or a Unified Program Agency, as defined in Section 25404, to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative effective date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative effective date of this chapter, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a Unified Program Agency, as defined in Section 25404, or the authority of a local environmental health department that is not a Unified Program Agency.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and the schedule for any interim measures or controls issued pursuant to subdivision (h) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Without exception, the facility shall have developed and shall continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A plan for the prevention, detection, and response to fires.
(D)A closure plan.
(E)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill.
(F)An inventory management plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(G)A facility security plan consistent with the requirements of Section 66265.14 of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(3)The department shall post all information provided by the owner or operator of a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. For purposes of this subdivision, the department shall consider an application to be complete if it includes each of the plans and other information specified in subdivision (a). Failure of the owner or operator to provide a complete permit application within one year shall be grounds for the department to initiate denial of the application, subject to the following:
(i)The three-year period for review of an application may be extended as necessary for completion of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) process.
(ii)If the department does not complete the permit process and issue the permit within three years, the department shall provide written notice to the public, setting forth an explanation for the delay, and shall conduct a public meeting upon request.
(iii)If the owner or operator of a facility has timely submitted a complete application and responded to any additional requests for information from the department, the facility may continue to operate, subject to all requirements applicable to the facility under this chapter, pending final action on its permit application even if the department does not complete the permit review process within the timeframe specified in this paragraph.
(5)The owner or operator shall comply with the provisions of each plan required under paragraph (2) as approved by the department and incorporated into the permit for the facility. The department shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(6)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(7)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, and the specific terms and conditions to be included in the permit, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(8)The department shall also conduct at least one site visit to the applicants facility after receipt of the permit application.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance advance, using a form of communication preferred by the community, and be held in an accessible location at a convenient time. The applicant shall invite the department and other regulatory agencies with jurisdiction over the metal shredding facility.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process, including the owner or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
(i)The department shall post on its internet website general information about each metal shredding facility that has applied for or obtained a permit under this chapter, including without limitation the facilitys current permit status, a schedule for issuance of a draft permit and associated public meetings and opportunity for public comment periods, and a summary of the facilitys compliance history subsequent to the effective date.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, subject to all of the following requirements:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(b)On or before the effective date, the owner or operator has developed and implements a written plan for the prevention, detection, and response to fires that meets the requirements of paragraphs (1) and (2) of subdivision (b) of Section 25095.13. A copy of the fire response plan shall be submitted to the department within seven days of the effective date and shall be subject to review and approval of the department after consultation with the facility and the local fire department of the jurisdiction where the facility is located.
(c)On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(d)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(e)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(f)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes generated at the facility.
(g)The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department, a Unified Program Agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste or hazardous waste constituents.
(3)Metal shredder residue.
(4)Chemically treated metal shredder residue.
(h)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements and a reasonable schedule for compliance with those measures.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(M)Materials requiring special handling, as defined in Section 42167 of the Public Resources Code.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(H)Records of offsite transportation of metal shredder aggregate and CTMSR.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
(g)The owner or operator of a metal shredding facility shall provide written notice to the department at least 60 days before transferring ownership or operation of the facility.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of shredder feedstock and metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (E) of paragraph (2) of subdivision (b).
(5)Standards for the installation and maintenance of paving with concrete, steel plate, or other surfacing materials approved by the department that are designed to prevent infiltration and to collect and route water to a water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Procedures for response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)Monitoring of temperatures on all feedstock and metal shredder aggregate piles, using an infrared camera or other equivalent equipment that continuously monitors the temperature of feedstock and aggregate piles and provides an alarm or other indication of temperature increases outside normal range.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles, including typical periods of breakdown, maintenance, and repair. The following limits shall apply:
(i)No individual stockpile of feedstock shall exceed the amount of material that can be processed within a 24-hour period.
(ii)No individual pile of metal shredder aggregate shall exceed the amount of material that can be processed within a 48-hour period.
(iii)All feedstock and metal shredder aggregate piles shall be subject to continuous 24-hour onsite surveillance, including when the facility is not operating, and such other additional controls specified in the facilitys approved fire response plan.
(3)The department, in coordination with the local fire department of the jurisdiction where the metal shredding facility is located, shall review a facilitys fire response plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1) Throughput increases and increases in maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2) Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3) Changes in design of processing equipment and conveyance systems.
(4) Changes in operations and methods of operation.
(5) Installation and modification of processing and other equipment and conveyance systems.
(6) Repair and replacement of processing and other equipment and conveyance systems.
(7) Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8) Construction of new structures and enclosures and changes to structures and enclosures.
(9) Installation and modification of abatement equipment and emission control systems.
(10) Installation of and modifications to water reuse and recycling systems.
(11) Installation of and repair to paving.
(12) Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)Except as provided in subdivision (d), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains substantial compliance with this chapter and the owner or operator provides the department with written notice of these changes within 30 days of making the changes. The department shall post the notice on the section of its internet website that provides information regarding metal shredding facilities.
(c)The department shall evaluate the information provided in the notice from the facility pursuant to this subdivision, as well as any objections from the public, to assess whether the modification could result in a potentially significant impact on the environment. If the department determines that the modification could have a potentially significant impact on the environment, the owner or operator of the facility shall be required to implement changes to the modification as necessary to mitigate the impact to the extent feasible.
(d)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(e)(1)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(2)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to subdivision (b) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(3)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (1) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department and the local fire department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Section 25095.10 or 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous materials or wastes that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
(e)If the facility is required to implement postclosure care following closure of the facility, the owner or operator shall provide a financial assurance mechanism for postclosure using one or more of the financial mechanisms described in Section 66265.145 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement all aspects of this chapter, other than costs incurred in connection with the departments review and issuance of metal shredding facility permits. The fees established pursuant to this section shall also be sufficient to reimburse the departments reasonable cost to implement Sections 25150.87 and 41514.6, as applicable to metal shredding facilities, subject to this chapter. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department as described in this section.
(b)In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal that is processed on an annual basis.
(4)The types of scrap metal that are processed at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(c)The Controller shall establish a new and separate account, the Metal Shredders Facility Account. The fees collected pursuant to this section shall be deposited into the Metal Shredders Facility Account and be available for expenditure by the department, upon appropriation by the Legislature, solely for the purpose of implementation and administration of this chapter and Sections 25150.87 and 41514.6.
(d)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(e)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
25095.51.(a)(1)A person who applies for a metal shredding facility permit under this chapter shall enter into a written agreement with the department pursuant to which that person shall reimburse the department for the direct costs reasonably incurred by the department in processing the application. The fee shall be sufficient to cover the departments review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit. The permit fee shall be in addition to the annual fee assessed pursuant to Section 25095.50 and shall be established on the basis of the same factors listed in subdivision (b) of Section 25095.50.
(2)An agreement required pursuant to paragraph (1) shall provide for a 25-percent deposit to be made with the submittal of the application. The 25-percent advance payment shall be based upon the departments total estimated costs of processing the application.
(b)(1)Pursuant to Section 21089 of the Public Resources Code, an applicant for a metal shredding facility permit shall also pay all costs incurred by the department for purposes of complying with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), in conjunction with the application.
(2)Paragraph (1) does not apply to projects that are exempt from CEQA.
(c)Reimbursements received pursuant to this section shall be placed in the Metal Shredders Facility Account established pursuant to Section 25095.50 and be available for expenditure by the department, upon appropriation by the Legislature.
8.Enforcement25095.60.(a)The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to pursue administrative or judicial enforcement for violations of this chapter and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment, and to deny an application for a permit for any of the reasons set forth in paragraph (1) of subdivision (a) of Section 25095.61. These enforcement mechanisms shall apply to violations of this chapter relating to the management of materials listed in subdivision (a) of Section 25095.20.
(b)(1)The department may order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, if the owner or operator fails to develop and implement a fire response plan as required by paragraphs (1) and (2) of subdivision (b) of Section 25095.13. The owner or operator may resume shredder operations and receipt of feedstock immediately upon providing written confirmation to the department that the facility is operating in accordance with a fire response plan.
(2)The department may prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. So long as the owner or operator of the facility has developed and is implementing a fire response plan, the facility may continue to conduct metal shredding operations and metal processing operations to reduce the inventory of shredder feedstock or metal shredder aggregate, as appropriate, and may resume receipt of feedstock at the facility immediately upon providing written confirmation to the department compliance with the limitations on pile size and duration have been achieved.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(6)Any person who submitted written comments on the draft permit may file an appeal of the departments final permit decision with the Office of Administrative Hearings, pursuant to Chapter 5 (commencing with Section 11500) of Part I of Division 3 of Title 22 of the Government Code. An appeal filed pursuant to this paragraph shall be limited to those conditions of the final permit that were included in the persons written comments to the department during the public comment period.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of a A city attorney, county counsel, district attorney, or the Attorney General to may maintain a civil or criminal prosecution to enforce this chapter, consistent with existing law and without need for a referral from the department. In addition, nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of or of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Is protective of Protects public health and the environment and all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities, however facilities. However, this chapter does not alter or override the authority of the department or a Unified Program Agency, as defined in Section 25404, to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative date of this chapter, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a certified unified program agency, Unified Program Agency, as defined in Section 25404. 25404, or the authority of a local environmental health department that is not a Unified Program Agency.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and the schedule for any interim measures or controls issued pursuant to subdivision (g) (h) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Without exception, the facility shall have developed and shall continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A plan for the prevention, detection, and response to fires.
(C)(D)A closure plan.
(D)A current closure cost estimate.(E)A corrective action cost estimate, if any.(F)(E)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill.
(G)(F)An inventory management plan. plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(G)A facility security plan consistent with the requirements of Section 66265.14 of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(3)The department shall post all information provided by the owner or operator of a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall approve, modify, or deny the application. The take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. For purposes of this subdivision, the department shall consider an application to be complete if it includes each of the plans and other information specified in subdivision (a). Failure of the owner or operator to provide a complete permit application within one year shall be grounds for the department to initiate denial of the application, subject to the following:
(i)The three-year period for review of an application may be extended as necessary for completion of the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) process.
(ii)If the department does not complete the permit process and issue the permit within three years, the department shall provide written notice to the public, setting forth an explanation for the delay, and shall conduct a public meeting upon request.
(iii)If the owner or operator of a facility has timely submitted a complete application and responded to any additional requests for information from the department, the facility may continue to operate, subject to all requirements applicable to the facility under this chapter, pending final action on its permit application even if the department does not complete the permit review process within the timeframe specified in this paragraph.
(5)The owner or operator shall comply with the provisions of each plan required under paragraph (2) as approved by the department and incorporated into the permit for the facility. The department shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(5)(6)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(6)(7)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, and the specific terms and conditions to be included in the permit, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h) (1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance and be held in an accessible location at a convenient time.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process, including the owner or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, subject to all of the following requirements:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(b)The On or before the effective date, the owner or operator has developed and implements a written plan for the prevention, detection, and suppression of response to fires that meets the requirements of paragraphs (1) and (2) of subdivision (b) of Section 25095.13. A copy of the fire response plan shall be submitted to the department within seven days of the effective date and shall be subject to review and approval of the department after consultation with the facility and the local fire department of the jurisdiction where the facility is located.
(c)On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13.
(c)(d)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(d)(e)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(e)(f)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes. wastes generated at the facility.
(f)(g)The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department department, a Unified Program Agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following outside the boundaries of the facility: into air, soil, or surface water that could threaten human health or the environment:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste. waste or hazardous waste constituents.
(3)Hazardous waste constituents.(4)(3)Metal shredder residue.
(5)(4)Chemically treated metal shredder residue.
(g)(h)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements. requirements and a reasonable schedule for compliance with those measures.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(H)Records of offsite transportation of metal shredder aggregate and CTMSR.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
(g)The owner or operator of a metal shredding facility shall provide written notice to the department at least 60 days before transferring ownership or operation of the facility.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of shredder feedstock and metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (G) (E) of paragraph (2) of subdivision (b) of Section 25095.10. (b).
(5)Standards for the installation and maintenance of paving with concrete surfacing, concrete, steel plate, or other surface that is surfacing materials approved by the department that are designed to prevent infiltration and to collect and route water that drains to a process a water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Maintenance of appropriate Procedures for response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)The monitoring Monitoring of temperatures on all feedstock, feedstock and metal shredder aggregate piles, and equipment relating to metal processing operations using an infrared camera or other equivalent. equivalent equipment that continuously monitors the temperature of feedstock and aggregate piles and provides an alarm or other indication of temperature increases outside normal range.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles, including typical periods of breakdown, maintenance, and repair. The following limits shall apply:
(i)No individual stockpile of feedstock shall exceed the amount of material that can be processed within a 24-hour period.
(ii)No individual pile of metal shredder aggregate shall exceed the amount of material that can be processed within a 48-hour period.
(iii)All feedstock and metal shredder aggregate piles shall be subject to continuous 24-hour onsite surveillance, including when the facility is not operating, and such other additional controls specified in the facilitys approved fire response plan.
(3)The department department, in coordination with the local fire department of the jurisdiction where the metal shredding facility is located, shall review a metal shredding facility fire suppression facilitys fire response plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents. Actions taken by the department pursuant to this paragraph are exempt from Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1) Throughput increases and increases in maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2) Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3) Changes in design of processing equipment and conveyance systems.
(4) Changes in operations and methods of operation.
(5) Installation and modification of processing and other equipment and conveyance systems.
(6) Repair and replacement of processing and other equipment and conveyance systems.
(7) Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8) Construction of new structures and enclosures and changes to structures and enclosures.
(9) Installation and modification of abatement equipment and emission control systems.
(10) Installation of and modifications to water reuse and recycling systems.
(11) Installation of and repair to paving.
(12) Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)(1)Except as provided in paragraph (2), subdivision (d), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains substantial compliance with this chapter and the owner or operator provides the department with written notice of these changes within 30 days of making the changes. The department shall post the notice on the section of its internet website that provides information regarding metal shredding facilities and shall consider any information from the public in evaluating the potential impact of the proposed modification. facilities.
(c)The department shall evaluate the information provided in the notice from the facility pursuant to this subdivision, as well as any objections from the public, to assess whether the modification could result in a potentially significant impact on the environment. If the department determines that the modification could have a potentially significant impact on the environment, the owner or operator of the facility shall be required to implement changes to the modification as necessary to mitigate the impact to the extent feasible.
(2)(d)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(3)(e)(1)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(4)(2)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to paragraph (1) subdivision (b) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(5)(3)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (3) (1) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surface surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department and the local fire department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Section 25095.10 or 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous substances materials or wastes that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
(e)If the facility is required to implement postclosure care following closure of the facility, the owner or operator shall provide a financial assurance mechanism for postclosure using one or more of the financial mechanisms described in Section 66265.145 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement this chapter all aspects of this chapter, other than costs incurred in connection with the departments review and issuance of metal shredding facility permits. The fees established pursuant to this section shall also be sufficient to reimburse the departments reasonable cost to implement Sections 25150.87 and 41514.6, as applicable to metal shredding facilities. facilities, subject to this chapter. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department to implement this chapter, as applicable to metal shredding facilities. In as described in this section.
(b)In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal that is processed on an annual basis.
(4)The types of scrap metal that are processed at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(b)(c)The Controller shall establish a new and separate account, the Metal Shredders Facility Account. The fees collected pursuant to this section shall be deposited into the Metal Shredders Facility Account and be available for expenditure by the department, upon appropriation by the Legislature, solely for the purpose of implementation and administration of this chapter. chapter and Sections 25150.87 and 41514.6.
(c)(d)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(d)(e)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
25095.51.(a)(1)A person who applies for a metal shredding facility permit under this chapter shall enter into a written agreement with the department pursuant to which that person shall reimburse the department for the direct costs reasonably incurred by the department in processing the application. The fee shall be sufficient to cover the departments review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit. The permit fee shall be in addition to the annual fee assessed pursuant to Section 25095.50 and shall be established on the basis of the same factors listed in subdivision (b) of Section 25095.50.
(2)An agreement required pursuant to paragraph (1) shall provide for a 25-percent deposit to be made with the submittal of the application. The 25-percent advance payment shall be based upon the departments total estimated costs of processing the application.
(b)(1)Pursuant to Section 21089 of the Public Resources Code, an applicant for a metal shredding facility permit shall also pay all costs incurred by the department for purposes of complying with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code), in conjunction with the application.
(2)Paragraph (1) does not apply to projects that are exempt from CEQA.
(c)Reimbursements received pursuant to this section shall be placed in the Metal Shredders Facility Account established pursuant to Section 25095.50 and be available for expenditure by the department, upon appropriation by the Legislature.
8.Enforcement25095.60.(a)The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to pursue administrative or judicial enforcement for violations of this chapter and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment. environment, and to deny an application for a permit for any of the reasons set forth in paragraph (1) of subdivision (a) of Section 25095.61. These enforcement mechanisms shall apply to violations of this chapter relating to the management of materials listed in subdivision (a) of Section 25095.20.
(b)(1)The department may order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, if the owner or operator fails to develop and implement a fire response plan as required by paragraphs (1) and (2) of subdivision (b) of Section 25095.13. The owner or operator may resume shredder operations and receipt of feedstock immediately upon providing written confirmation to the department that the facility is operating in accordance with a fire response plan.
(2)The department may prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in subparagraph (E) of paragraph (2) of subdivision (b) of Section 25095.13. So long as the owner or operator of the facility has developed and is implementing a fire response plan, the facility may continue to conduct metal shredding operations and metal processing operations to reduce the inventory of shredder feedstock or metal shredder aggregate, as appropriate, and may resume receipt of feedstock at the facility immediately upon providing written confirmation to the department compliance with the limitations on pile size and duration have been achieved.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action, action and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of a city attorney, county counsel, district attorney, or the Attorney General to maintain a civil or criminal prosecution or of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves both all of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Is protective of all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
(3)Does not cause disproportionate and potentially discriminatory impacts on local communities, consistent with Title VI of the federal Civil Rights Act of 1964 (Public Law 88-352) and Section 11135 of the Government Code.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site and all contiguous properties under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard, yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard, yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
(e)A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities, however this chapter does not alter or override the authority of the department to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative date of this chapter, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a certified unified program agency, as defined in Section 25404.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter chapter, including the provisions of a compliance plan approved by the department pursuant to subdivision (a) of Section 25095.11 and any interim measures or controls issued pursuant to subdivision (g) of Section 25095.11, may continue to operate pending final action on a permit application as specified in this section. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)(A)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(B)Before taking final action to issue a permit for a metal shredding facility under this chapter, the department shall determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammermill hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A closure plan.
(D)A current closure cost estimate.
(E)A corrective action cost estimate, if any.
(F)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammermill. hammer mill.
(G)An inventory management plan.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance for closure and third-party liability consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(M)A compliance plan and schedule if required pursuant to subdivision (a) of Section 25095.11.
(3)The department shall post all information provided by the owner or operator of an existing a metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall approve, modify, or deny the application. The department may impose shall impose any additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(5)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(6)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate aggregate, and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility. facility, if chemical treatment of residue is included in the permit application. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammermill hammer mill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance and be held in an accessible location at a convenient time.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process. process, including the owner or operators implementation of any interim measures or controls required by the department pursuant to Section 25095.11. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall solicit comment from the community on the completed application materials and hold a public meeting or solicit commentfrom the community on the completed application materials. meeting. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, if all subject to all of the following requirements are met: requirements:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with. with and has developed and implemented a plan and schedule approved by the department for achieving compliance with the provisions of this chapter.
(b)The owner or operator has developed and implements a written plan for the prevention, detection, and suppression of fires that meets the requirements of subdivision (b) of Section 25095.13.
(c)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(d)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(e)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes.
(f)The owner or operator shall maintain operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by the department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment that are in effect or are otherwise required by the department on or before the effective date of this chapter: outside the boundaries of the facility:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste.
(3)Hazardous waste constituents.
(4)Metal shredder residue.
(5)Chemically treated metal shredder residue.
(g)The owner or operator shall be subject to any interim measures or controls established by the department during consideration of the permit application that are necessary for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for those interim requirements.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control or other means, control, including, but not limited to, technologies or equipment taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (G) of paragraph (2) of subdivision (b) of Section 25095.10.
(5)Standards for the installation and maintenance of paving with concrete surfacing, steel plate, or other surface that is designed to prevent infiltration and to collect and route water that drains to a process water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Maintenance of appropriate response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)The monitoring of temperatures on all feedstock, metal shredder aggregate piles, and equipment relating to metal processing operations using an infrared camera or other equivalent.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles. cycles, including typical periods of breakdown, maintenance, and repair.
(3)The department may require shall review a metal shredding facility to update its fire suppression plan on an annual basis and require the owner or operator to update the plan if necessary based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents. Actions taken by the department pursuant to this paragraph are exempt from Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in retention ponds, sumps, tanks, and associated piping or other engineered retention units to minimize ponding free-standing water at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristic characteristics of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in operating rate. maximum operating rate that are authorized or approved by an air quality management district or air pollution control district.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)(1)Except as provided in paragraph (2), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains compliance with this chapter and the owner or operator shall provide provides the department with written notice of these changes within 30 days of making the changes. The department may evaluate the information provided in the notice from the facilityunder this subdivision to assess shall post the notice on the section of its internet website that provides information regarding metal shredding facilities and shall consider any information from the public in evaluating the potential impact of the proposed modification.
(2)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall notify thepublic when it approves modifications pursuant to this subdivision. provide notice of the proposed modification to the public and shall comply with the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code) in its review of the project.
(3)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(4)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to paragraph (1) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(5)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (3) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surface designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Sections Section 25095.10 or 25095.11 25095.11, the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a), (a) and any other provision of this chapter, metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations. Regulations, if it exhibits a characteristic of hazardous waste specified in those regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator demonstrates to the satisfaction of the department, on an annual basis, determines, as prescribed in Section 66262.11 of Title 22 of the California Code of Regulations, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristic characteristics of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous substances that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement this chapter as applicable to metal shredding facilities. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department to implement this chapter, as applicable to metal shredding facilities. In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal that is processed on an annual basis.
(4)The types of scrap metal that are processed at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(b)The Controller shall establish a new and separate subaccount in the Hazardous Waste Control account, the Metal Shredders Facility Account. The fees collected pursuant to this section shall be deposited into the subaccount Metal Shredders Facility Account and be available for expenditure by the department, upon appropriation by the Legislature, solely for purposes the purpose of implementation and administration of this chapter.
(c)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(d)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
8.Enforcement25095.60.The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a significant danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action, and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves both of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Is protective of all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site and all contiguous properties under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard, a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard, metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities, however this chapter does not alter or override the authority of the department to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative date of this chapter, any nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025, or the authority of a certified unified program agency, as defined in Section 25404.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter may continue to operate pending final action on a permit application as specified in this section. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammermill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A closure plan.
(D)A current closure cost estimate.
(E)A corrective action cost estimate, if any.
(F)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammermill.
(G)An inventory management plan.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(3)The department shall post all information provided by the owner or operator of an existing metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, with the exception of information that is submitted to the department under a claim of trade secrecy or business confidentiality and that has been determined by the department to be exempt from disclosure consistent with exceptions or exemptions under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall approve, modify, or deny the application. The department may impose additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(5)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(6)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammermill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance and be held in an accessible location at a convenient time.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall hold a public meeting or solicit comment from the community on the completed application materials. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, if all of the following requirements are met:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with.
(b)The owner or operator has developed and implements a written plan for the prevention, detection, and suppression of fires that meets the requirements of subdivision (b) of Section 25095.13.
(c)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(d)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(e)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes.
(f)The owner or operator shall maintain all existing practices and controls designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment that are in effect or are otherwise required by the department on or before the effective date of this chapter:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste.
(3)Hazardous waste constituents.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control or other means, taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified after completion of the load check process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (G) of paragraph (2) of subdivision (b) of Section 25095.10.
(5)Standards for the installation and maintenance of paving with concrete surfacing, steel plate, or other surface that is designed to prevent infiltration and to collect and route water that drains to a process water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Maintenance of appropriate response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)The monitoring of temperatures on all feedstock, metal shredder aggregate piles, and equipment relating to metal processing operations using an infrared camera or other equivalent.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles.
(3)The department may require a metal shredding facility to update its fire suppression plan on an annual basis based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents. Actions taken by the department pursuant to this paragraph are exempt from Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in sumps, tanks, and associated piping or other engineered retention units to minimize ponding at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristic of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in operating rate.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)(1)Except as provided in paragraph (2), the changes described in subdivision (a) may be made without seeking prior approval from the department if the metal shredding facility maintains compliance with this chapter and the owner or operator shall provide the department with written notice of these changes within 30 days of making the changes. The department may evaluate the information provided in the notice from the facility under this subdivision to assess the potential impact of the proposed modification.
(2)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall notify the public when it approves modifications pursuant to this subdivision.
(3)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(4)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to paragraph (1) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(5)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (3) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surface designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Sections 25095.10 or 25095.11 the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California and is operated in accordance with the law of the state where the receiving facility is located.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Notwithstanding subdivision (a), metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation under Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator demonstrates to the satisfaction of the department, on an annual basis, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristic of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous substances that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement this chapter as applicable to metal shredding facilities. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department to implement this chapter, as applicable to metal shredding facilities. In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions, if any, developed pursuant to paragraph (4) of subdivision (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal that is processed on an annual basis.
(4)The types of scrap metal that are processed at the facility.
(5)The nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(b)The Controller shall establish a separate subaccount in the Hazardous Waste Control Account. The fees collected pursuant to this section shall be deposited into the subaccount and be available for expenditure by the department, upon appropriation by the Legislature, solely for purposes of implementation and administration of this chapter.
(c)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(d)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
8.Enforcement25095.60.The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a significant danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action, and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.The Legislature finds and declares that Section 1 of this act, which adds Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code, imposes a limitation on the publics right of access to the meetings of public bodies or the writings of public officials and agencies within the meaning of Section 3 of Article I of the California Constitution. Pursuant to that constitutional provision, the Legislature makes the following findings to demonstrate the interest protected by this limitation and the need for protecting that interest:In order to protect proprietary business information from public disclosure, it is necessary for that information to remain confidential.SEC. 8.SEC. 7.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)The Legislature finds and declares all of the following:
(a)(1)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(b)(2)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(c)(3)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(d)(4)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities that operate in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(e)(5)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(f)Nothing in this chapter is intended to(6)This chapter does not alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
(7)This chapter does not impair the rights of any person under any state or federal law.
(b)It is the intent of the Legislature that this chapter be implemented in a manner that achieves both of the following:
(1)Promotes the economic viability of all metal shredding facilities, regardless of size, so as to ensure the continued capacity of the state to manage the large volume of scrap metal that is produced in California every year.
(2)Is protective of all communities, including those that have been designated as disadvantaged or vulnerable pursuant to state law.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the shredding and processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site and all contiguous properties under the control of the owner or operator of a facility that uses a shredding technique, stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard, a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.Reserved. The following facilities are not subject to this chapter:
(a)Facilities that shred only e-waste subject to regulation under Chapter 23 (commencing with Section 66273.1) of Division 4.5 of Title 22 of the California Code of Regulations.
(b)Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping.
(c)Facilities that shred only automotive tires.
(d)A feeder yard, metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities, however this chapter does not alter or override the authority of the department to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative date of this chapter, any nonhazardou nonhazardous waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025. 39025, or the authority of a certified unified program agency, as defined in Section 25404.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter may continue to operate pending final action on a permit application as specified in this section. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammermill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A closure plan.
(D)A current closure cost estimate.
(E)A corrective action cost estimate, if any.
(F)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammermill.
(G)An inventory management plan.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(3)The department shall post all information provided by the owner or operator of an existing metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, with the exception of information that is submitted to the department under a claim of trade secrecy or business confidentiality and that has been determined by the department to be exempt from disclosure under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall approve, modify, or deny the application. The department may impose additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(5)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(6)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammermill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance and be held in an accessible location at a convenient time.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility and before a decision is made to approve or deny the application, the department shall hold a public meeting or solicit comment from the community on the completed application materials. The facility, and before the public meeting described in paragraph (5), the department shall schedule periodic progress meetings to inform the community of the status of the permitting process. Meetings shall be held pursuant to this paragraph at least once per year and shall be noticed and convened as specified in paragraph (2).
(5)Before a decision is made to approve or deny the application, the department shall hold a public meeting or solicit comment from the community on the completed application materials. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(5)(6)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, if all of the following requirements are met:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with.
(b)The owner or operator has developed and implements a written plan for the prevention, detection, and suppression of fires that meets the requirements of subdivision (b) of Section 25095.13.
(c)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(d)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(e)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes.
(f)The owner or operator shall maintain all existing practices and controls designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment that are in effect or are otherwise required by the department on or before the effective date of this chapter:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste.
(3)Hazardous waste constituents.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be designed, constructed, maintained, maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by using all appropriate, reasonably available, implementing all reasonable and feasible operational or engineering methods. methods of control or other means, taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified in after completion of the load check and rejected. process and that were unknowingly accepted by the facility. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (G) of paragraph (2) of subdivision (b) of Section 25095.10.
(5)Standards for the installation and maintenance of paving with concrete surfacing, steel plate, or other surface that is designed to prevent infiltration and to collect and route water that drains to a process water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Maintenance of appropriate response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)The monitoring of temperatures on all feedstock, metal shredder aggregate piles, and equipment relating to metal processing operations using an infrared camera or other equivalent.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles.
(3)The department may require a metal shredding facility to update its fire suppression plan on an annual basis based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents. Actions taken by the department pursuant to this paragraph are exempt from Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in sumps, tanks, and associated piping or other engineered retention units to minimize ponding at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristic of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in operating rate.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)(1)Except as provided in paragraph (2), the changes described in subdivision (a) may only be made without seeking prior approval from the department if the metal shredding facility maintains compliance with this chapter and the owner or operator shall provide the department with 30 days advance written notice of these changes. changes within 30 days of making the changes. The department may evaluate the information provided in the notice from the facility under this subdivision to assess the potential impact of the proposed modification.
(2)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall notify the public when it approves modifications pursuant to this subdivision.
(3)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(4)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the notice provided pursuant to paragraph (1) or the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(5)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (3) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surface designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Sections 25095.10 or 25095.11 the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)Either one of the following:
(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California, is owned or operated by the same person that produced the metal shredder aggregate in the State of California, California and is operated in accordance with the law of the state where the receiving facility is located. For purposes of this subparagraph, person also includes a corporate parent, corporate subsidiary, or a subsidiary of the same corporate parent.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Any metal shredder aggregate that is transported offsite and that does not comply with subparagraph (B) of paragraph (2) of subdivision (a) of this section shall be subject to regulation under chapter 6.5 and implementing Title 22 of the California Code of Regulations.(c)(b)Notwithstanding subdivision (a), metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation under Chapter 6.5 (commencing with Section 25100) and implementing Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.21.(a)Untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste as defined in Section 66261.101 of Title 22 of the California Code of Regulations shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of Chapter 6.5 (commencing with Section 25100) and implementing regulations. Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
(h)The owner or operator of a metal shredding facility shall not be required to treat metal shredder residue and shall be exempt from this section if the owner or operator demonstrates to the satisfaction of the department, on an annual basis, that the metal shredder residue generated at the facility does not exhibit any state or federal characteristic of hazardous waste, as prescribed in Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous substances that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.(a)(1) The department shall require metal shredding facilities to do both of the following:(A)Monitor hazardous waste constituents requested by the department.(B)Report the results of the monitoring required pursuant to subparagraph (A) to the department. The facilities may also report those results to the local public health department.(2)The department shall collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste.(b)All metal shredding facilities subject to this section shall implement the facilitywide fence-line hazardous waste constituent monitoring requirements developed pursuant to this section.(c)On or before July 1, 2027, the department shall develop a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring pursuant to paragraph (1) of subdivision (a) indicates any release of light fibrous material.(d)On or before January 1, 2027, the department shall develop regulations to implement, interpret, or make specific this section.(e)The department shall oversee and enforce the implementation of subdivision (a) pursuant to Article 8 (commencing with Section 25180).(f)Any reasonable regulatory costs incurred by the department in implementing this section may be reimbursed by the fee on metal shredding facilities imposed pursuant to subdivision (a) of Section 25095.50.25095.32.[RESERVED]
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement this chapter as applicable to metal shredding facilities. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department to implement this chapter, as applicable to metal shredding facilities. In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions conditions, if any, developed pursuant to paragraph (1) (4) of subdivision (a) (b) of Section 25095.10.
(2)The size of the facility.
(3)The volume of scrap metal that is processed on an annual basis.
(4)The types of scrap metal that are processed at the facility.
(3)(5)The type and amount nature of metal processing operations occurring at the facility.
(6)Whether the facility conducts chemical stabilization of metal shredder residue.
(4)(7)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(b)The Controller shall establish a separate subaccount in the Hazardous Waste Control Account. The fees collected pursuant to this section shall be deposited into the subaccount and be available for expenditure by the department, upon appropriation by the Legislature, solely for purposes of implementation and administration of this chapter.
(c)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(d)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
8.Enforcement25095.60.The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a significant danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action, and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.The Legislature finds and declares that Section 1 of this act, which adds Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code, imposes a limitation on the publics right of access to the meetings of public bodies or the writings of public officials and agencies within the meaning of Section 3 of Article I of the California Constitution. Pursuant to that constitutional provision, the Legislature makes the following findings to demonstrate the interest protected by this limitation and the need for protecting that interest:
In order to protect proprietary business information from public disclosure, it is necessary for that information to remain confidential.
SEC. 8.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
The Legislature finds and declares all of the following:
(a)Metal shredding facilities are essential to a thriving circular economy in the State of California because they provide an efficient, reliable, and effective means of recycling the millions of tons of recyclable metal, including end-of-life vehicles and household appliances, that are generated annually in the state.
(b)Metal shredding facilities enable the recycling of end-of-life metal products and other metal-containing materials by reducing them in size and facilitating the recovery of ferrous and nonferrous metals and other recyclable commodities. These activities conserve energy and natural resources and support the states goal of reducing the emissions of greenhouse gases and combating climate change.
(c)Metal shredding facilities differ in important respects from waste management facilities. For this reason, regulation and oversight of metal shredding facilities are most appropriately addressed through requirements that are specific to the metal shredding industry while fully protecting human health and the environment. It is the intent of the Legislature that metal shredding facilities be regulated pursuant to this chapter and not Chapter 6.5 (commencing with Section 25100).
(d)The purpose of this chapter is to establish operating standards and other requirements applicable to metal shredding facilities and to resolve ongoing legal disputes over the regulatory status of metal shredding facilities in the state. The department, the metal shredding industry, and neighboring communities would all benefit from clear, enforceable requirements to govern oversight of metal shredding facilities and their operations and to proactively protect public health and the environment.
(e)Metal shredding operations have the potential to release hazardous materials and impact neighboring communities and the environment if the materials are not properly managed.
(f)Nothing in this chapter is intended to alter or override the authority of any other federal, state, or local agency with jurisdiction to regulate the activities of a metal shredding facility in accordance with any other applicable law.
2.Definitions and General Provisions25095.1.For purposes of this chapter, the following definitions apply:
(a)Ancillary hazardous waste means any hazardous waste generated at the facility other than metal shredder residue managed pursuant to this chapter.
(b)Chemically treated metal shredder residue or CTMSR means the waste generated from the shredding and processing of metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described in this chapter.
(c)Corrective action means all actions necessary to mitigate any public health or environmental threat resulting from a release into the environment of hazardous substances from an operating or closed metal shredding facility and to restore the environmental conditions as necessary to protect human health and the environment.
(d)Department means the Department of Toxic Substances Control.
(e)Effective date means the date that this chapter becomes operative.
(f)Existing metal shredding facility means a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this chapter is signed into law by the Governor.
(g)Feedstock means material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder. Feedstock is often referred to as light iron or tin.
(h)Light fibrous material means a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, that is susceptible to dispersal into the environment.
(i)Metal processing operations means the stockpiling and handling of metal shredder aggregate, the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate, and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
(j)Metal products means all ferrous and nonferrous metals that have been removed from metal shredder aggregate or from metal shredder residue.
(k)Metal shredder aggregate means the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include (1) metals that have been removed from metal shredder aggregate, or (2) metal shredder residue. Metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
(l)Metal shredder residue means waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris, that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
(m)Metal shredding facility means the entire site and all contiguous properties under the control of the owner or operator of a facility that uses a shredding technique, such as a hammer mill to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. Metal shredding facility does not include a feeder yard, a metal crusher, or a metal baler if that facility does not conduct metal shredding operations.
(n)New metal shredding facility means a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this chapter.
(o)Operator means the person responsible for the overall operation and management of a metal shredding facility.
(p)Owner means a person who owns a metal shredding facility in whole or in part.
(q)Person means any of the following:
(1)An individual, trust, firm, joint stock company, business concern, partnership, limited liability company, association, or corporation, including, but not limited to, a governmental corporation.
(2)A city, county, district, commission, the state, and any department, agency, or political subdivision thereof.
(3)An interstate body.
(4)The federal government and any department or agency thereof, to the extent permitted by law.
(r)Scrap metal has the same meaning as provided in Section 66260.10 of Title 22 of the California Code of Regulations.
25095.2.Reserved.
25095.3.Metal shredding facilities that are subject to regulation and comply with this chapter are not hazardous waste facilities, however this chapter does not alter or override the authority of the department to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 (commencing with Section 25100) and Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations.
25095.4.(a)On the operative date of this chapter, the departments Official Policy and Procedure 88-6, titled Auto Shredder Waste Policy and Procedures dated November 21, 1988, is hereby repealed.
(b)On the operative date of this chapter, any nonhazardou waste determination issued by the department or its predecessor, the State Department of Health Services, to any metal shredding facility pursuant to Section 66260.200(f) of Title 22 of the California Code of Regulations is hereby repealed.
25095.5.A citation or reference in this chapter to a requirement of the regulations in Division 4.5 (commencing with Section 66260.1) of Title 22 of the California Code of Regulations shall be understood to apply the technical requirements of the regulation to metal shredding operations authorized pursuant to this chapter. All citations or references to those requirements shall be to the provision as it read on the effective date.
25095.6.This chapter does not limit the authority of a local air pollution control district or air quality management district, as defined in Section 39025.
25095.7.The department may adopt regulations as necessary to implement this chapter, and thereafter may update and revise the regulations from time to time, consistent with this chapter. The department shall adopt regulations to implement Section 25095.50, relating to the imposition of fees on metal shredding facilities.
3.Permits and Operations25095.10.(a)(1)Except as provided in paragraph (2), a metal shredding facility shall not operate in California, unless it has a permit issued by the department.
(2)On and after the effective date, an existing metal shredding facility operating in compliance with the requirements of this chapter may continue to operate pending final action on a permit application as specified in this section. Except as provided in this section, nothing herein shall prevent the department from taking enforcement action pursuant to Article 8 (commencing with Section 25095.60) before issuance of a final permit.
(3)Any permit approved by the department pursuant to this chapter shall include a reference to all permits issued to the facility by other environmental regulatory agencies. Any action taken by the department pursuant to this chapter shall be consistent with the requirements imposed by those regulatory agencies. The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
(4)Any permit action shall consider the conclusions and recommendations set forth in a community emissions reduction program prepared pursuant to Section 44391.2 and any other health risk assessment conducted by a local air district pursuant to the Air Toxics Hot Spots Information and Assessment Act of 1987 (Part 6 (commencing with Section 44300) of Division 26) or other applicable law. If an air quality health risk assessment has not been conducted, the owner or operator of the facility shall conduct an analysis of equivalent scope and depth as approved by the local air district.
(5)Each permit issued under this chapter shall set forth inspection, entry, monitoring, compliance certification, and reporting requirements to assure compliance with the permit terms and conditions. Any report required to be submitted by a metal shredding facility pursuant to a permit issued under this chapter shall be signed by the owner or operator and shall be certified under penalty of law in the manner specified in Section 66270.11 of Title 22 of the California Code of Regulations.
(b)(1)A person who submitted a hazardous waste facility permit application pursuant to Chapter 6.5 (commencing with Section 25100) to treat metal shredder residue before the effective date may withdraw that application and conduct those treatment operations pursuant to this chapter.
(2)Within 30 days of the effective date, the owner or operator of an existing metal shredding facility shall submit a notice of intent to apply for a permit. Thereafter, the owner or operator of an existing metal shredding facility shall apply for a permit pursuant to this chapter no later than six months following submittal of the notice of intent and shall provide all of the following information to the department:
(A)A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose.
(B)A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammermill and all downstream metal processing equipment where light fibrous material is likely to accumulate.
(C)A closure plan.
(D)A current closure cost estimate.
(E)A corrective action cost estimate, if any.
(F)A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammermill.
(G)An inventory management plan.
(H)A preparedness and prevention plan consistent with the requirements of Article 3 (commencing with Section 66265.30) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(I)A contingency plan consistent with the requirements of Article 4 (commencing with Section 66265.50) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(J)A flood plain map, if applicable.
(K)Evidence of financial assurance consistent with the requirements of Article 8 (commencing with Section 66265.140) of Chapter 15 of Division 4.5 of Title 22 of the California Code of Regulations.
(L)A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility.
(3)The department shall post all information provided by the owner or operator of an existing metal shredding facility pursuant to paragraph (2) on the departments internet website in a manner that is readily accessible to the public, with the exception of information that is submitted to the department under a claim of trade secrecy or business confidentiality and that has been determined by the department to be exempt from disclosure under the California Public Records Act (Division 10 (commencing with Section 7920.000) of Title 1 of the Government Code).
(4)The department shall review the permit application submitted pursuant to paragraph (2) of subdivision (b) as expeditiously as possible and shall approve, modify, or deny the application. The department may impose additional facility-specific conditions that are necessary to ensure compliance with this chapter and for the protection of human health and the environment. The department shall provide the owner or operator of the metal shredding facility with written findings explaining the basis for any such conditions.
(5)In reviewing any plan submitted pursuant to subparagraph (L) of paragraph (2), the department may request additional information from the owner or operator as necessary to determine the legitimacy of the offsite metal processing operations described in the plan, and may require modifications to the plan, or disapprove the plan, if the department determines that the receiving facility is not engaged in legitimate metal recycling.
(6)In considering an application for a metal shredding facility permit submitted pursuant to this subdivision, the department shall consider the site-specific aspects of the metal shredding facility, including, but not limited to:
(A)The nature of the surrounding community and environment.
(B)The results of any community-specific assessment.
(C)The facility size, location, and configuration.
(D)The equipment, enclosures, and infrastructure.
(E)The specific metal processing operations conducted at the metal shredding facility, including types of feedstocks and annual throughput.
(F)Other relevant site-specific characteristics.
(c)(1)The owner or operator of a new metal shredding facility shall submit an application to the department for a permit and shall not commence operations at the new metal shredding facility until the department issues a permit.
(2)The application shall consist of both of the following:
(A)All the information described in paragraph (2) of subdivision (b).
(B)Any other information requested by the department relating to construction or operation of the new metal shredding facility.
(d)(1)The approval of an application for an existing or new metal shredding facility shall be considered a discretionary decision subject to the California Environmental Quality Act ((CEQA) Division 13 (commencing with Section 21000) of the Public Resources Code). Nothing in this chapter is intended to modify, restrict, or expand the provisions of CEQA as applied to metal shredding facilities.
(2)The department may require an applicant for a metal shredding facility permit to submit additional information in support of an application.
(e)A permit issued pursuant to this section shall authorize the storage and processing of metal shredder aggregate and the onsite chemical treatment of metal shredder residue conducted at the metal shredding facility. A metal shredding facility that begins chemical treatment of metal shredder residue for the first time after the effective date shall notify the department no later than 30 days before commencement of treatment operations at the facility and shall provide the department with all information required by this chapter relating to the chemical treatment operations within 120 days of commencement of operations. This section does not require a permit for the operation of a hammermill or other equipment used at a metal shredding facility that does not involve the handling of metal shredder aggregate or chemical treatment of metal shredder residue.
(f)(1)Any permit for a metal shredding facility approved under this chapter shall be for a fixed term of 10 years, unless the department determines that a shorter term is necessary to protect human health, safety, or the environment or based on the compliance history of the facility.
(2)At least two years before the expiration of a permit, the owner or operator of a metal shredding facility intending to renew the facilitys permit shall submit a complete application for permit renewal, pursuant to this section, that has been updated to reflect the current operations of the facility.
(3)The department shall review the information and either determine the submission is complete or request additional information from the owner or operator. If the application to renew the permit is submitted before the end of the fixed term, the permit shall be deemed extended until the department has taken final action to renew or deny the renewal application and the owner or operator has exhausted all applicable rights of appeal.
(4)When prioritizing pending renewal applications for review and in determining the need for any new conditions on a renewed permit, the department shall consider any input received from the public.
(g)The department shall consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency in reviewing the facilitys application for permit renewal and in considering the need for additional conditions to be included in the permit.
(h)(1)The requirements of this subdivision apply to all permit applicants.
(2)Before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant shall hold at least one public meeting, or other community engagement activity approved by the department, to inform the community of metal processing activities and any potential impacts to nearby communities and solicit questions and input from the public. The applicant shall prepare a sign-in sheet for the meeting and allow all attendees an opportunity to provide their names and addresses. The public meeting or community engagement activity shall be noticed to the community at least 30 days in advance and be held in an accessible location at a convenient time.
(3)The applicant shall submit a summary of the meeting or activity described in paragraph (2), and a list of attendees and their addresses voluntarily provided pursuant to paragraph (2), if any, and copies of any written comments or materials submitted, if any, to the department as a part of the permit application or application for permit renewal. The summary of the pre-application meeting or activity shall be inclusive of, but not limited to, all of the following:
(A)A summary of the metal shredding facilitys communications to the public about proposed or then current metal processing activities and their potential impacts on nearby communities.
(B)A summary of public input and questions.
(C)Responses to public input and questions and how public input has informed the application materials, if applicable.
(4)After the submission of a complete permit application or application for permit renewal for a facility and before a decision is made to approve or deny the application, the department shall hold a public meeting or solicit comment from the community on the completed application materials. The public comment period shall be open for a minimum of 45 days. The department shall respond to all public comments within 60 days of the close of the public comment period. The public comments and the departments responses to the comments shall be included in the administrative record for the permit proceeding and in the departments notice of its intended decision to approve or deny the permit.
(5)Before initiating a public outreach process, the department and the owner or operator of a metal shredding facility shall solicit and incorporate feedback from the surrounding community to determine a locally appropriate process for community engagement.
25095.11.Notwithstanding Section 25095.10, an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this chapter as of the effective date may continue to operate pending the departments review and approval or denial of the permit application, if all of the following requirements are met:
(a)The owner or operator identifies in its application each provision of this chapter that the facility is unable to immediately comply with.
(b)The owner or operator has developed and implements a written plan for the prevention, detection, and suppression of fires that meets the requirements of subdivision (b) of Section 25095.13.
(c)The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to Section 25095.41, including, but not limited to, both of the following:
(1)The owner or operator submits to the department a cost estimate and closure plan as part of the permit application.
(2)Within 30 days after the permit application is submitted, the owner or operator submits to the department a financial assurance mechanism that is equivalent to the requirements set forth in Sections 66264.143 and 66264.147 of Title 22 of the California Code of Regulations.
(d)The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to Section 25095.30, or otherwise meets the requirements in Section 25095.30 and initiates any required actions identified in the preliminary endangerment assessment.
(e)The owner or operator complies with the standards set forth in Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations with respect to all ancillary hazardous wastes.
(f)The owner or operator shall maintain all existing practices and controls designed to prevent the possibility of any unplanned sudden or nonsudden release of any of the following into air, soil, or surface water that could threaten human health or the environment that are in effect or are otherwise required by the department on or before the effective date of this chapter:
(1)In-process materials or components thereof, including metal shredder aggregate and light fibrous material.
(2)Hazardous waste.
(3)Hazardous waste constituents.
25095.12.The owner or operator of a metal shredding facility shall operate the metal shredding facility in accordance with all of the following requirements:
(a)The metal shredding facility shall be designed, constructed, maintained, and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or nonsudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by using all appropriate, reasonably available, and feasible operational or engineering methods.
(b)(1)The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
(A)RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations, and non-RCRA hazardous waste, as defined in Section 66261.101 of Title 22 of the California Code of Regulations.
(B)Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection.
(C)Radioactive materials.
(D)Petroleum-based wastes, including, but not limited to, used oil as defined in Section 25250.1, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances.
(E)Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components.
(F)Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights.
(G)Military ordnance, except ordnance designated specifically as Material Designated as Safe (MDAS).
(H)Explosives, explosive residues, fireworks, and other incendiary materials.
(I)Regulated electronic waste.
(J)Mercury containing devices.
(K)Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries.
(L)Compressed gas cylinders and propane canisters, unless empty and disabled.
(2)The inbound source control policy shall contain all of the following:
(A)A written description of the load checking protocol designed to prevent materials or wastes identified in paragraph (1) from being shredded at the facility. Incoming feedstock subject to load checking shall not be shredded until the load-checking process has been completed.
(B)A written description of the process for rejecting loads, specific materials, or wastes that contain the materials or wastes identified in paragraph (1).
(C)A plan and template documents used to demonstrate that load checks are conducted and that materials or wastes identified in paragraph (1) are not accepted.
(D)A requirement to maintain all documentation related to the inbound source control policy and load checking the facility for at least five years and provide the documentation to the department upon request.
(E)A written description of a process to make a waste determination pursuant to Section 66262.11 of Title 22 of the California Code of Regulations for any of the materials or wastes listed in paragraph (1) that are identified in the load check and rejected. Any waste determined to be a hazardous waste shall be considered generated at the metal shredding facility and shall be managed as a hazardous waste in accordance with Chapter 6.5 (commencing with Section 25100).
(c)The owner or operator of the metal shredding facility shall develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in Section 42167 of the Public Resources Code, including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to Section 25212.
(d)(1)The owner or operator of the metal shredding facility shall maintain all of the following documents at the metal shredding facility:
(A)A written inspection schedule meeting the substantive requirements of subdivision (b) of Section 66265.15 of Title 22 of the California Code of Regulations.
(B)A written description of training documents, including a syllabus or outline, of the type and amount of both introductory and continuing training that has been given to each person at the metal shredding facility.
(C)A contingency plan that contains the information specified in Section 66265.52 of Title 22 of the California Code of Regulations.
(D)A copy of any local air quality management district or air pollution control district permit and other governmental permits or approvals required for operation of the metal shredding facility equipment.
(E)The closure plan required under Section 25095.40.
(F)A copy of documents related to any environmental investigation and any cleanup or other remediation measures implemented at the facility within the last five years.
(G)The housekeeping plan prepared pursuant to Section 25095.13.
(2)The owner or operator shall make the documents described in paragraph (1) available at the metal shredding facility to the department, the United States Environmental Protection Agency, or a local governmental agency upon request.
(e)The owner or operator of a metal shredding facility shall comply with subdivision (b) of Section 66265.142 of Title 22 of the California Code of Regulations.
(f)The owner or operator of a metal shredding facility shall provide notice to the department of an imminent or actual emergency situation, as required by Section 66265.56 of Title 22 of the California Code of Regulations.
25095.13.The owner or operator of a metal shredding facility shall develop and comply with plans and minimum standards relating to each of the following aspects of the metal processing operation:
(a)The control of releases, including, but not limited to:
(1)Plans for complying with applicable local air quality management district or air pollution control district regulations and permit requirements, including the requirements of any approved emissions minimization plan or comparable plan required by applicable regulations.
(2)A housekeeping plan that is approved by the department and that does all of the following:
(A)Details all measures to control dispersal of metal shredder aggregate and its constituents, including light fibrous material, and metal shredder residue and constituents. Those measures shall include, but are not limited to, mechanical and manual sweeping, washing or cleaning of equipment and structures to remove accumulated debris, application of water using water trucks, sprinklers, spray bars, deluge systems or other dust suppression equipment, fencing, and enclosures.
(B)Specifies the frequency for each measure detailed pursuant to subparagraph (A).
(C)Addresses the disposition of residuals generated from cleaning, including, but not limited to, debris, sweepings, rinse water, and any other material that does not contain recoverable ferrous or nonferrous metal.
(D)Requires the completion of written logs of all housekeeping activities. The written logs shall be maintained in accordance with Section 25095.12.
(E)Requires the management of any light fibrous material that has been released from the facility to be subject to regulation under Chapter 6.5 (commencing with Section 25100).
(3)A metal shredding facility inspection plan that is approved by the department. The metal shredding facility inspection plan shall include all of the following:
(A)Inspection of all facilities and equipment that is used to manage metal shredder aggregate.
(B)A general inspection schedule that complies, with the specific requirements in Sections 66264.174, 66264.195, 66264.254, 66265.403, and 66264.1101 of Title 22 of the California Code of Regulations.
(C)All areas where the deposition of metal shredder aggregate, including light fibrous material may occur, including accessible areas within 500 feet of the metal shredding facilitys property boundary or further as determined by the department.
(4)An inventory management plan, that is approved by the department, to prevent accumulation of metal shredder aggregate and treated or untreated metal shredder residue in excess of the limitations set forth in subparagraph (G) of paragraph (2) of subdivision (b) of Section 25095.10.
(5)Standards for the installation and maintenance of paving with concrete surfacing, steel plate, or other surface that is designed to prevent infiltration and to collect and route water that drains to a process water management system. The paving shall be inspected quarterly and repaired as needed. The results of the paving inspections and any paving repairs shall be submitted to the department with the annual report and as requested by the department.
(b)(1)A separate written plan for the prevention, detection, and suppression of fires. The plan shall comply with all of the following:
(A)Be shared with local emergency responders.
(B)Be used to monitor metal shredding facility operations for evidence of incipient fire.
(C)Establish procedures for responding to fires of different duration and severity.
(D)Be activated in response to any incident at the metal shredding facility that falls within the scope of the plan.
(2)The plan shall include all of the following:
(A)Maintenance of appropriate response to incipient fires and access to adequate water, firefighting foam, and other supplies at the metal shredding facility that can be used in responding to an incipient or larger fire.
(B)Training of metal shredding facility personnel in the proper use of fire-response equipment and procedures and notification requirements.
(C)Coordination with local fire departments and other first responders as necessary to support maximum effectiveness in responding to an emergency at the metal shredding facility.
(D)The monitoring of temperatures on all feedstock, metal shredder aggregate piles, and equipment relating to metal processing operations using an infrared camera or other equivalent.
(E)Inventory management provisions necessary to prevent the accumulation of feedstock or metal shredder aggregate at the facility in quantities that exceed the reasonable holding capacity of the facility and that cannot be processed within normal operating cycles.
(3)The department may require a metal shredding facility to update its fire suppression plan on an annual basis based on changes in technology or fire prevention practices, or the facilitys compliance history and history of fire, explosion, or release of hazardous waste or hazardous waste constituents. Actions taken by the department pursuant to this paragraph are exempt from Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code.
(c)Stormwater management and control, including, but not limited to:
(1)Containment of stormwater in sumps, tanks, and associated piping or other engineered retention units to minimize ponding at the metal shredding facility.
(2)A stormwater testing plan to identify if stormwater exhibits any characteristic of toxicity as described in Section 66261.24 of Title 22 of the California Code of Regulations.
(3)Compliance with the metal shredding facilitys stormwater pollution prevention plan and spill prevention, control, and countermeasures plan.
(4)Discharge of stormwater in accordance with the general permit for discharges of stormwater associated with industrial activities or waste discharge requirements issued by a regional water quality control board, including sampling requirements.
25095.14.(a)Subject to subdivision (b), the owner or operator of a metal shredding facility may make the following physical or operational changes to the metal shredding facility without seeking prior approval from the department:
(1)Throughput increases and increases in operating rate.
(2)Increases in efficiency of metal processing operations, including, without limitation, sizing, separation, sorting, removal, and recovery.
(3)Changes in design of processing equipment and conveyance systems.
(4)Changes in operations and methods of operation.
(5)Installation and modification of processing and other equipment and conveyance systems.
(6)Repair and replacement of processing and other equipment and conveyance systems.
(7)Decommissioning and removal of equipment and conveyance systems that are no longer in use.
(8)Construction of new structures and enclosures and changes to structures and enclosures.
(9)Installation and modification of abatement equipment and emission control systems.
(10)Installation of and modifications to water reuse and recycling systems.
(11)Installation of and repair to paving.
(12)Any other changes to the metal shredding facility unrelated to the storage or processing of metal shredder aggregate and metal shredder residue.
(b)(1)Except as provided in paragraph (2), the changes described in subdivision (a) may only be made without seeking prior approval from the department if the metal shredding facility maintains compliance with this chapter and the owner or operator shall provide the department with 30 days advance written notice of these changes. The department may evaluate the information provided in the notice from the facility under this subdivision to assess the potential impact of the proposed modification.
(2)The owner or operator of a metal shredding facility that proposes to modify the metal shredding facility in a manner that could result in a significant environmental impact from operations that were not considered by the department in reviewing the information submitted pursuant to this article shall provide the department with 60 days advance written notice of the modification and shall not implement the modification without approval from the department. The department shall notify the public when it approves modifications pursuant to this subdivision.
(3)On or before July 1 of each year, the owner or operator of a metal shredding facility shall submit an annual report to the department describing the material physical or operational changes, if any, made to the metal shredding facility during the previous calendar year relating to the management of metal shredder aggregate or metal shredder residue.
(4)Upon request by the department, the metal shredding facility shall be required to provide additional information about the nature or extent of changes described in the annual report as necessary to demonstrate the metal shredding facilitys ongoing compliance with applicable regulations.
(5)Physical changes to the metal shredding facilitys ongoing operations that are reported to the department in compliance with paragraph (3) may be reviewed and modified by the department as necessary to ensure compliance with the requirements of this chapter.
25095.15.(a)The owner or operator of a metal shredding facility shall manage all metal shredder aggregate during metal processing operations as necessary to achieve the following minimum standards:
(1)All outdoor equipment used for processing metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(2)All outdoor equipment used for the conveyance of metal shredder aggregate from one location within the metal shredding facility to another location within the metal shredding facility shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment.
(3)All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment.
(b)Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
(1)The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure.
(2)The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate.
(3)The floor shall be constructed of concrete surfacing, steel plate, or other surface designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system. The floor shall be inspected on a quarterly basis and repaired as needed. The results of the inspections and any repairs to the floor shall be submitted to the department with the annual report submitted pursuant to Section 25095.14.
(4)Any free liquids that drain from materials stored inside the enclosure shall be collected and routed to the metal shredding facilitys water management system.
(c)Trommel or augers shall be located in a building or otherwise covered or enclosed so as to minimize the possibility of releases.
(d)Subject to written approval by the department, stockpiling of metal shredder aggregate outside the confines of an enclosure required by subdivision (b) may be allowed for limited periods of time if all of the following conditions are met:
(1)The activity is necessary to accommodate unforeseen circumstances or operational disruptions that prevent the material from being stored inside an enclosure. These unforeseen circumstances or operational disruptions shall have been outside the reasonable control of the facility. The facility shall use best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling of metal shredder aggregate.
(2)The operator provides written notice to the department at least 24 hours before the need to store material outside arises.
(3)The operator conducts watering or other dust control measures to minimize the possibility of the release of light fibrous material from the stockpile into the environment.
(4)The outdoor stockpiling activity is conducted for 10 or fewer consecutive operating days.
(5)The outdoor stockpiling activity does not begin until approval is provided by the department. The department may rescind the temporary approval for outdoor stockpiling if the facility is not using best efforts to remedy any unforeseen circumstances or operational disruptions that necessitate outdoor stockpiling.
(e)The requirements of this section shall also apply to the management of untreated and treated metal shredder residue.
25095.16.(a)Metal shredder aggregate that is transported to an offsite metal shredding facility or metal recycling facility for purposes of processing shall be tarped or otherwise contained during shipment and transported in a manner that minimizes the possibility of release into the environment.
(b)The metal shredder aggregate shall be shipped directly to the offsite metal processing facility and shall not be handled at any interim location or held at any publicly accessible interim location for more than four hours unless required by hours of service or other applicable law or held by a rail transporter for reasons outside the control of the person arranging for transport.
(c)Each shipment of metal shredder aggregate by truck or rail shall be identified by a standard bill of lading or other shipping document that complies with applicable United States Department of Transportation requirements and that contains all of the following:
(1)The quantity, by weight, of metal shredder aggregate being transported.
(2)The name, physical and mailing addresses, and telephone number of the metal shredding facility that produced the metal shredder aggregate.
(3)The name, physical and mailing addresses, and telephone number of the metal processing facility that will process the metal shredder aggregate.
(4)The date the shipment of metal shredder aggregate leaves the originating metal shredding facility.
(5)The date the shipment of metal shredder aggregate is scheduled to arrive at the receiving metal processing facility.
(6)The name of the transporter that shipped the metal shredder aggregate from the originating metal shredding facility to the receiving metal processing facility.
(d)The originating metal shredding facility shall retain a copy of all shipping documents onsite, in either paper or electronic form, for a period of at least three years. The three-year record retention period may be extended at the direction of the department during the course of any unresolved enforcement action regarding the shipments.
(e)Transporters shall obtain and maintain an appropriate amount and type of insurance as approved by the department.
4.Classification of Materials25095.20.(a)If managed in accordance with this chapter, including any plans approved by the department and any additional conditions imposed by the department pursuant to Sections 25095.10 or 25095.11 the following materials are not waste, as defined in Section 25124, and shall not be subject to regulation under Chapter 6.5 (commencing with Section 25100) of this division or Division 4.5 (commencing with Section 66250) of Title 22 of the California Code of Regulations:
(1)Scrap metal.
(2)Metal shredder aggregate that is managed in either of the following ways:
(A)The metal shredder aggregate is stored and processed at the same metal shredding facility that produced the metal shredder aggregate.
(B)The metal shredder aggregate is transferred to another metal shredding facility or metal recycling facility within federal Standard Industrial Classification Code 5093 for the purpose of processing or further processing the metal shredder aggregate to separate and remove ferrous or nonferrous metals, subject to all of the following:
(i)(I)The receiving facility is located in the State of California and operates in accordance with the requirements of this chapter.
(II)The receiving facility is located in a state other than the State of California, is owned or operated by the same person that produced the metal shredder aggregate in the State of California, and is operated in accordance with the law of the state where the receiving facility is located. For purposes of this subparagraph, person also includes a corporate parent, corporate subsidiary, or a subsidiary of the same corporate parent.
(ii)Before transportation offsite, the metal shredder aggregate is managed in accordance with the requirements of the plan approved by the department under subparagraph (L) of paragraph (2) of subdivision (b) of Section 25095.10.
(iii)The receiving facility keeps records of the amount of ferrous and nonferrous metal recovered from the metal shredder aggregate and makes this information available to the department upon request.
(iv)The metal shredder aggregate is transported in accordance with the requirements of Section 25095.16.
(3)Intermediate metal products that are subject to further processing to improve product quality.
(4)Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility.
(5)Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
(b)Any metal shredder aggregate that is transported offsite and that does not comply with subparagraph (B) of paragraph (2) of subdivision (a) of this section shall be subject to regulation under chapter 6.5 and implementing Title 22 of the California Code of Regulations.
(c)Notwithstanding subdivision (a), metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation under Chapter 6.5 (commencing with Section 25100) and implementing Title 22 of the California Code of Regulations.
25095.21.(a)Chemically treated metal shredder residue is not hazardous waste if all of the following conditions are met:
(1)Unless an alternative treatment recipe is approved by the department, untreated metal shredder residue shall be treated with at least 0.7 gallons of silicate solution per short ton of the untreated metal shredder residue and cement by weight equal to 8.5 percent of the weight of the untreated metal shredder residue.
(2)Metal shredding facilities shall document, on a weekly basis, how many tons of metal shredder residue was treated and how much silicate solution and cement were used in the treatment of the untreated metal shredder residue to comply with paragraph (1).
(3)The chemically treated metal shredder residue does not meet the definition of RCRA hazardous waste, as defined in Section 66261.100 of Title 22 of the California Code of Regulations.
(4)Immediately after waste stabilization, and at all times before offsite transportation and disposal, chemically treated metal shredder residue shall be managed in a manner that prevents releases of chemically treated metal shredder residue outside of a designated accumulation area. The designated accumulation area shall meet the requirements of either of the following:
(A)A self-supporting structure that meets all of the following requirements:
(i)The structure shall be fully or partially enclosed with a floor, at least three walls, and a roof to prevent exposure of the chemically treated metal shredder residue to the elements, including surface transport by precipitation runoff, contamination of soil and groundwater, and wind dispersal outside the enclosure.
(ii)The structure shall be constructed of man-made materials of sufficient strength and thickness to support themselves, the waste contents, any personnel and heavy equipment that operate within the unit, and the stresses of daily operation, such as the movement of personnel, wastes, and handling of equipment within the structure.
(iii)The designated accumulation area shall be labeled or marked clearly with the words Chemically Treated Metal Shredder Residue or CTMSR. The metal shredding facility shall comply with accumulation time limits as required in Section 66262.17 of Title 22 of the California Code of Regulations.
(B)A containment building that meets the requirements of either of the following:
(i)Article 29 (commencing with Section 66264.1100) of Chapter 14 of Title 22 of the California Code of Regulations.
(ii)Article 29 (commencing with Section 66265.1100) of Chapter 15 of Title 22 of the California Code of Regulations.
(b)Chemically treated metal shredder residue shall not be transported to, and shall not be disposed of at, any location other than one of the following:
(1)A composite-lined portion of a solid waste landfill unit that meets all requirements applicable to disposal of municipal solid waste in California after October 9, 1993, based on State Water Resources Control Board Resolution No. 93-62.
(2)A solid waste landfill or other facility that is regulated by waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code for discharges of designated waste, as defined in Section 13173 of the Water Code, or that allows for the discharge of chemically treated metal shredder residue. The discharge of chemically treated metal shredder residue includes its use as an alternative daily cover or for other beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.
(3)Any other landfill or location that is authorized by law to receive chemically treated metal shredder residue for disposal or beneficial use.
(c)The transporter of chemically treated metal shredder residue shall comply with all of the following conditions:
(1)Chemically treated metal shredder residue shall be contained and covered during shipment and transported in a manner that prevents any release into the environment.
(2)The transporter shall comply with all applicable United States Department of Transportation shipping requirements.
(3)The container used to transport chemically treated metal shredder residue shall lack evidence of leakage, spillage, or damage that could cause releases under reasonably foreseeable conditions.
(4)The transporter of chemically treated metal shredder residue shall not transport chemically treated metal shredder residue to a place other than a landfill approved to receive chemically treated metal shredder residue, as described in subdivision (b).
(5)The chemically treated metal shredder residue is not held at any publicly accessible interim location for more than four hours, unless required by other provisions of law, before disposal.
(6)If an unauthorized release of chemically treated metal shredder residue occurs during transportation, the transporter shall immediately contain all releases of chemically treated metal shredder residue and residues from chemically treated metal shredder residue into the environment and determine whether any material resulting from that release is a hazardous waste and, if so, shall manage the hazardous waste in compliance with all applicable requirements of this division. The transporter of chemically treated metal shredder residue is considered the generator of any hazardous waste resulting from the release and is subject to the requirements of Chapter 12 (commencing with Section 66262.10) of Division 4.5 of Title 22 of the California Code of Regulations.
(d)Each shipment of chemically treated metal shredder residue shall be accompanied by a shipping document containing all of the following information:
(1)The quantity, by weight in short tons, of chemically treated metal shredder residue being transported.
(2)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(3)The name, physical and mailing addresses, and telephone number of the destination landfill.
(4)The date the shipment of chemically treated metal shredder residue leaves the metal shredding facility.
(5)The date the shipment of chemically treated metal shredder residue arrives at the destination landfill.
(6)The name and telephone number of the transporter who shipped the chemically treated metal shredder residue from the metal shredding facility to the destination landfill.
(e)The metal shredding facility shall retain onsite a copy of all documentation produced pursuant to this section for at least three years from the date that the chemically treated metal shredder residue that is the subject of the documentation was generated. The department may request the information identified in subdivision (d) in the form of a summary log or a copy of each individual shipping document. The three-year record retention period is automatically extended during the course of any unresolved enforcement action regarding chemically treated metal shredder residue management activity or as requested by the department.
(f)The generating metal shredding facility shall, on or before February 1 of the following year, submit to the department, at the address specified in subdivision (g) of this section, a written annual report containing all of the following information:
(1)The name, physical and mailing addresses, and telephone number of the generating metal shredding facility.
(2)The name, telephone number, and email address of the contact person at the generating metal shredding facility who should be contacted regarding management, transportation, and disposal of chemically treated metal shredder residue.
(3)The name, physical and mailing address, and telephone number for each of the landfills to which the generating metal shredding facility shipped chemically treated metal shredder residue during the previous calendar year.
(4)The total cumulative quantity of chemically treated metal shredder residue, by weight in short tons, shipped to all landfills, and the respective quantity of chemically treated metal shredder residue, by weight in short tons, shipped to each landfill, during the previous calendar year.
(5)The United States Environmental Protection Agency identification number of the generating metal shredding facility.
(g)The metal shredding facility shall provide a copy of any relevant document identified in subdivision (e) upon receipt of a request from the department. Annual reports submitted to the department pursuant to subdivision (f) shall be sent to the following address: Department of Toxic Substances Control, CTMSR Reporting Staff, P.O. Box 806, Sacramento, CA 95812-0806, with the words Attention: CTMSR Annual Report prominently displayed on the front of the envelope.
5.Reporting25095.30.(a)Except as otherwise provided in subdivision (c), within one year after the effective date, the owner or operator of a metal shredding facility shall conduct a preliminary endangerment assessment, as defined in Section 78095, and submit it to the department. The preliminary endangerment assessment shall be conducted in accordance with the most current department guidance manual for evaluating hazardous substance release sites and shall include an evaluation of process areas or locations where releases of materials containing hazardous constituents may have or have occurred, a conceptual site model, and site-specific human health and ecological screening evaluations.
(b)The owner or operator of a metal shredding facility shall conduct appropriate corrective action as needed to address releases of hazardous substances that pose a significant threat to human health or the environment. This subdivision does not prohibit the department from issuing a corrective action order under Section 25187 subsequent to any investigation of the metal shredding facility.
(c)The owner or operator of a metal shredding facility may demonstrate compliance with this section by providing evidence to the department that, within the last five years, the metal shredding facility has completed an assessment of the metal shredding facility pursuant to an order issued by the department, a regional water quality control board, or any other federal, state, or local agency and is implementing, or has implemented, any corrective action requirements imposed by the agency.
25095.31.(a)The owner or operator of a metal shredding facility shall provide the department with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder. This notice shall be in addition to any notice that is required to be made to the Office of Emergency Services pursuant to Section 66265.56 of Title 22 of the California Code of Regulations and any other agency under applicable law.
(b)The owner or operator of a metal shredding facility shall establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility as specified in Section 66265.56 of Title 22 of the California Code of Regulations.
(c)The department shall evaluate how to apply to metal shredding facilities its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in subdivisions (b) and (c) of Section 25200.21.
25095.32.(a)(1) The department shall require metal shredding facilities to do both of the following:
(A)Monitor hazardous waste constituents requested by the department.
(B)Report the results of the monitoring required pursuant to subparagraph (A) to the department. The facilities may also report those results to the local public health department.
(2)The department shall collect and analyze light fibrous material at the fence lines to determine the potential for release of hazardous waste.
(b)All metal shredding facilities subject to this section shall implement the facilitywide fence-line hazardous waste constituent monitoring requirements developed pursuant to this section.
(c)On or before July 1, 2027, the department shall develop a procedure for community notification of the public for the area in which the metal shredding facility is located, if monitoring pursuant to paragraph (1) of subdivision (a) indicates any release of light fibrous material.
(d)On or before January 1, 2027, the department shall develop regulations to implement, interpret, or make specific this section.
(e)The department shall oversee and enforce the implementation of subdivision (a) pursuant to Article 8 (commencing with Section 25180).
(f)Any reasonable regulatory costs incurred by the department in implementing this section may be reimbursed by the fee on metal shredding facilities imposed pursuant to subdivision (a) of Section 25095.50.
6.Closure25095.40.(a)The owner or operator of a metal shredding facility shall have a written closure plan.
(1)The written closure plan shall address all of the following:
(A)The closure and removal of all feedstock, metal shredder aggregate, and treated and untreated metal shredder residue.
(B)The decontamination of equipment and operating areas used for processing metal shredder aggregate.
(C)The treatment of metal shredder residue and management of chemically treated metal shredder residue.
(2)The written closure plan shall include all of the following:
(A)A description of how each authorized unit will be closed. The description shall identify the maximum extent of the operation during the life of the unit, and how all of the following requirements will be met, if applicable:
(i)Section 66265.114 of Title 22 of the California Code of Regulations.
(ii)Subdivisions (a), (b), and paragraphs (1) and (2) of subdivision (c) of Section 66265.197 of Title 22 of the California Code of Regulations.
(iii)Section 66265.404 of Title 22 of the California Code of Regulations.
(B)An estimate of the maximum inventory of material in storage and in treatment at any time during the operation of an authorized unit at the metal shredding facility.
(C)A description of the steps needed to remove or decontaminate a unit, equipment, or structure during partial and final closure, including, but not limited to, procedures for cleaning equipment and removing contaminated soils, methods for sampling and testing surrounding soils, and criteria for determining the extent of decontamination required.
(D)An estimate of the expected year of closure and a schedule for final closure. The schedule for final closure shall include, at minimum, the total time required to close each authorized unit.
(3)The written closure plan shall be subject to approval by the department.
(4)An amendment to the written closure plan shall be done in compliance with subdivision (c) of Section 66265.112 of Title 22 of the California Code of Regulations.
(b)The metal shredder facility shall maintain compliance with both of the following requirements regarding closure:
(1)Subdivisions (a) and (b) of Section 66265.111 of Title 22 of the California Code of Regulations, in the same manner as those provisions apply to metal shredding facilities.
(2)Section 66265.114 of Title 22 of the California Code of Regulations.
(c)Within 90 days after processing the final volume of metal shredder aggregate, the owner or operator shall commence closure of the metal shredding facility in accordance with the written closure plan.
(d)The owner or operator shall complete closure activities in accordance with the written closure plan within 180 days after processing the final volume of metal shredder aggregate unless the owner or operator demonstrates to the department any of the following:
(1)The activities required to complete the closure will require longer than 180 days to complete.
(2)An authorized unit has the capacity to process additional metal shredder aggregate.
(3)There is a reasonable likelihood that a person other than the owner or operator will recommence operation of a unit, closure of the unit would be incompatible with the operation of the metal shredding facility, and the owner or operator has taken and will continue to take all steps necessary to prevent threats to human health and the environment.
(e)The owner or operator shall notify the department and any other agencies having jurisdiction over the closure project at least 15 days before completion of closure.
(f)The owner or operator shall remain in compliance with all applicable requirements of this chapter until the owner or operator submits to the department or authorized agency a certification signed by the owner or operator and by an independent, professional engineer registered in California that closure has been completed in accordance with the written closure plan and that the written closure plan meets or exceeds the applicable requirements of this chapter.
25095.41.(a)The owner or operator shall provide a closure cost estimate to the department in accordance with Section 66265.142 of Title 22 of the California Code of Regulations and based on all of the following factors:
(1)The cost of transporting any unprocessed metal shredder aggregate and metal shredder residue to another metal shredding facility for processing or disposal.
(2)The cost of decontaminating all areas and equipment used for storage and processing of metal shredder aggregate.
(3)The cost of decontaminating all areas and equipment used for treatment and storage of treated or untreated metal shredder residue.
(4)The cost for all closure sampling and analysis confirming decontamination sufficiently meets closure performance standards.
(5)The cost of disposition of the maximum amount of metal shredder aggregate and metal shredder residue that may be present at the metal shredding facility at the time of closure.
(6)The cost of closure certification.
(b)For the purpose of calculating the closure cost estimate, the owner or operator may apply the fair market value of any remaining feedstock and metal shredder aggregate against the estimated cost of closure. In addition, the owner or operator may take into consideration metal shredding facility structures, equipment, and other assets that may continue to be used, sold to third parties, or salvaged for scrap value. The closure cost estimate shall also be determined based on the site-specific aspects of the metal shredding facility, including, without limitation, those site-specific aspects specified in Section 25095.40.
(c)The owner or operator shall provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in Section 66265.143 of Title 22 of the California Code of Regulations.
(d)The owner or operator shall provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility. The owner or operator shall have and maintain liability coverage for sudden accidental occurrences in the amount of at least one million dollars ($1,000,000) per occurrence with an annual aggregate of at least two million dollars ($2,000,000), exclusive of legal defense costs. The owner or operator may satisfy the requirements of this subdivision through a financial mechanism identified in Section 66265.147 of Title 22 of the California Code of Regulations.
7.Fees25095.50.(a)The department shall collect an annual fee on all metal shredding facilities that are subject to the requirements of this chapter. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the departments reasonable costs to implement this chapter as applicable to metal shredding facilities. The fee schedule established by the department may be adjusted annually by the Board of Environmental Safety as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department to implement this chapter, as applicable to metal shredding facilities. In establishing the amount of a fee that may be imposed on a metal shredding facility pursuant to this section, the department shall consider all of the following factors as they relate to the departments reasonable oversight costs:
(1)The facility-specific permit conditions developed pursuant to paragraph (1) of subdivision (a) of Section 25095.10.
(2)The size of the facility.
(3)The type and amount of metal processing operations occurring at the facility.
(4)Any compliance costs borne by the facility pursuant to state and federal environmental quality regulations.
(b)The Controller shall establish a separate subaccount in the Hazardous Waste Control Account. The fees collected pursuant to this section shall be deposited into the subaccount and be available for expenditure by the department, upon appropriation by the Legislature, solely for purposes of implementation and administration of this chapter.
(c)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and, for purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.
(d)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from any of the following fees set forth in Chapter 6.5 (commencing with Section 25100), with respect to the production and processing of metal shredder aggregate and the generation, handling, treatment, transportation, and disposal of untreated or treated metal shredder residue:
(A)A fee imposed pursuant to Section 25205.7.
(B)A facility fee imposed pursuant to Section 25205.2.
(C)A fee imposed pursuant to Section 25205.5.
(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any hazardous waste generated and handled by the metal shredding facility that are ancillary to metal processing operations at the metal shredding facility.
8.Enforcement25095.60.The authority granted to the department in Article 8 (commencing with Section 25180) of Chapter 6.5 and its implementing regulations may be used to enforce this chapter, including, but not limited to, the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
25095.61.(a)(1)The department may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this chapter. A denial, revocation, or suspension shall be based on at least one of the following:
(A)Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment.
(B)An owner or operators failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time.
(C)A determination, supported by substantial evidence, that the permitted activity poses a significant danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation. In such situations, the department shall either deny, modify, suspend, or revoke a permit. Any modifications made by the department shall be consistent with and necessary to ensure compliance with the requirements of this chapter.
(D)Any cause specified in Section 25186.
(2)The department shall provide notice of any adverse action it proposes to be taken to the owner or operator of the metal shredding facility by certified mail with return receipt requested or by personal service.
(3)An owner or operator who wishes to appeal that adverse action shall appeal by submitting a letter to the department, within 10 days of receipt of notice of the adverse action, and requesting a hearing.
(4)Except as provided in paragraph (5), proceedings to appeal any decision made by the department under this chapter, including without limitation required modifications to any plan or other information submitted pursuant to Section 25095.10 and the imposition of site-specific conditions or other operating requirements applicable to a metal shredding facility, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Before initiating an appeal, the owner or operator of a facility shall meet and confer with the department in a good faith effort to resolve the dispute.
(5)Proceedings to appeal the departments decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this chapter shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
(b)An authorization to operate pursuant to this chapter is contingent upon the accuracy of information contained in the notifications and other documents required to be maintained.
(c)Nothing in this chapter, and no action taken by the department pursuant to this chapter, shall be construed as a limitation on the right of any person to maintain any civil action otherwise authorized by law.
SEC. 2.Section 25117 of the Health and Safety Code is amended to read:25117.(a)Except as provided in subdivision (d), hazardous waste means a waste that meets any of the criteria for the identification of a hazardous waste adopted by the department pursuant to Section 25141.
(b)Hazardous waste includes, but is not limited to, RCRA hazardous waste.
(c)Unless expressly provided otherwise, hazardous waste also includes extremely hazardous waste and acutely hazardous waste.
(d)Hazardous waste does not include a material that is not hazardous waste pursuant to Section 25095.20 or hazardous waste pursuant to Section 25095.21.
(e)Notwithstanding subdivision (a), in any criminal or civil prosecution brought by a city attorney, county counsel, district attorney, or the Attorney General for violation of this chapter, when it is an element of proof that the person knew or reasonably should have known of the violation, or violated the chapter willfully or with reckless disregard for the risk, or acted intentionally or negligently, the element of proof that the waste is hazardous waste may be satisfied by demonstrating that the waste exhibited the characteristics set forth in subdivision (b) of Section 25141.
SEC. 3.Section 25150.82 of the Health and Safety Code is repealed.25150.82.(a)The Legislature finds and declares that this section is intended to address the unique circumstances associated with the operation of metal shredding facilities, and the generation and management of wastes generated by metal shredding facilities. The Legislature further declares that this section does not set a precedent applicable to the management, including disposal, of other hazardous wastes.(b)For purposes of this section, metal shredding facility means an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to facilitate the separation and sorting of ferrous metals, nonferrous metals, and other recyclable materials from nonrecyclable materials that are components of the end-of-life vehicles, appliances, and other forms of scrap metal. Metal shredding facility does not include a feeder yard, a metal crusher, or a metal baler, if that facility does not otherwise conduct metal shredding operations.(c)The department, in consultation with the Department of Resources Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, may adopt regulations establishing management standards for metal shredding facilities for hazardous waste management activities within the departments jurisdiction as an alternative to the requirements specified in this chapter and the regulations adopted pursuant to this chapter, if the department does all of the following:(1)Prepares an analysis of the activities to which the alternative management standards will apply pursuant to subdivision (d). The department shall first prepare the analysis as a preliminary analysis and make it available to the public at the same time that the department gives notice, pursuant to Section 11346.4 of the Government Code, that it proposes to adopt the alternative management standards. The department shall include in the notice a statement that the department has prepared a preliminary analysis and a statement concerning where a copy of the preliminary analysis can be obtained. The information in the preliminary analysis shall be updated and the department shall make the analysis available to the public as a final analysis not less than 10 working days before the date that the regulation is adopted.(2)Demonstrates at least one of the conclusions set forth in paragraphs (1) to (4), inclusive, of subdivision (e).(3)Imposes, as may be necessary, conditions and limitations as part of the alternative management standards that ensure that the hazardous waste management activity to which the alternative management standards will apply will not pose a significant potential hazard to human health or safety or to the environment.(d)Before the department gives notice of a proposal to adopt the alternative management standards pursuant to subdivision (c), and before the department adopts the regulation, the department shall do all of the following:(1)Evaluate the operative environmental and public health regulatory oversight of metal shredding facilities, identifying activities that need to be addressed by the alternative management standards, or other advisable regulatory or statutory changes.(2)Evaluate the hazardous waste management activities.(3)Prepare, as required by paragraph (1) of subdivision (c), an analysis that addresses all of the following aspects of the activity, to the extent that the alternative management standards can affect these aspects of the activity:(A)The types of hazardous waste and the estimated amounts of each hazardous waste that are managed as part of the activity and the hazards to human health or safety or to the environment posed by reasonably foreseeable mismanagement of those hazardous wastes and their hazardous constituents. The estimate of the amounts of each hazardous waste that are managed as part of the activity shall be based upon information reasonably available to the department.(B)The complexity of the activity, and the amount and complexity of operator training, equipment installation and maintenance, and monitoring that are required to ensure that the activity is conducted in a manner that safely and effectively manages each hazardous waste.(C)The chemical or physical hazards that are associated with the activity and the degree to which those hazards are similar to, or different from, the chemical or physical hazards that are associated with the production processes that are carried out in the facilities that produce the hazardous waste that is managed as part of the activity.(D)The types of accidents that might reasonably be foreseen to occur during the management of particular types of hazardous waste streams as part of the activity, the likely consequences of those accidents, and the reasonably available actual accident history associated with the activity.(E)The types of locations where hazardous waste management activities associated with metal shredding and management of treated metal shredder waste may be carried out and the types of hazards or risks that may be posed by proximity to the land uses described in Section 25227. The estimate of the number of locations where the activity may be carried out shall be based upon information reasonably available to the department.(e)The department shall not give notice proposing the adoption of, and the department shall not adopt, a regulation pursuant to subdivision (c) unless it first demonstrates at least one of the following, using the information developed in the analysis prepared pursuant to subdivision (d) and any other information available to the department:(1)The requirements that the alternative management standards replace are not significant or important in either of the following situations:(A)Preventing or mitigating potential hazards to human health or safety or to the environment posed by the activity.(B)Ensuring that the activity is conducted in compliance with other applicable requirements of this chapter and the regulations adopted pursuant to this chapter.(2)A requirement is imposed and enforced by another public agency that provides protection of human health and safety and the environment that is as effective as, and equivalent to, the protection provided by the requirement, or requirements, that the alternative management standards replace.(3)Conditions or limitations imposed as part of the alternative management standards will provide protection of human health and safety and the environment equivalent to the requirement, or requirements, that the alternative management standards replace.(4)Conditions or limitations imposed as part of the alternative management standards accomplish the same regulatory purpose as the requirement, or requirements, that the alternative management standards replace, but at less cost or with greater administrative convenience, and without increasing potential risks to human health or safety or to the environment.(f)The department shall not adopt alternative management standards pursuant to this section if those standards are less stringent than the standards that would otherwise apply under the federal act.(g)Nothing in the alternative management standards authorized by this section is intended to duplicate or conflict with other laws, rules, or regulations adopted by other state agencies or affected local air quality management districts. The department shall, as much as possible, align the alternative management standards with the laws, rules, and regulations of other state agencies or affected local air quality management districts.(h)The owner or operator of a metal shredding facility, or solid waste disposal facility that has accepted treated metal shredder waste, that may be subject to the alternative management standards shall provide to the department all information and data determined by the department to be relevant to the evaluation and preparation of the analysis required by subparagraphs (A) to (E), inclusive, of paragraph (3) of subdivision (d).(i)The alternative management standards adopted by the department pursuant to this section may, to the extent it is consistent with the standards that would otherwise apply under the federal act, allow for treated metal shredder waste to be classified and managed as nonhazardous waste, provided that the analysis prepared pursuant to subdivision (d) demonstrates that classification and management as hazardous waste is not necessary to prevent or mitigate potential hazards to human health or safety or to the environment posed by the treated metal shredder waste.(j)(1)The disposal of treated metal shredder waste shall be regulated pursuant to this chapter and the regulations adopted pursuant to this chapter, unless alternative management standards are adopted by the department pursuant to this section.(2)If the alternative management standards adopted by the department pursuant to this section result in treated metal shredder waste being classified as nonhazardous waste, the material may be managed in either of the following manners:(A)It may be used at a unit described in subparagraph (B) as alternative daily cover or for beneficial reuse pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section.(B)It may be placed in a unit that meets the waste discharge requirements issued pursuant to Division 7 (commencing with Section 13000) of the Water Code that allow for discharges of designated waste, as defined in Section 13173 of the Water Code, or of treated metal shredder waste.(3)This section does not limit the disposal or use of treated metal shredder waste as alternative daily cover pursuant to Section 41781.3 of the Public Resources Code and the regulations adopted to implement that section, or for other authorized beneficial uses if that disposal or use is at a facility meeting the requirements of subparagraph (B) of paragraph (2), is made under the authority of the hazardous waste determinations governing metal shredder waste issued by the department before January 1, 2014, and is made before the department does either of the following:(A)Rescinds, in accordance with applicable law, the conditional nonhazardous waste classifications issued pursuant to subdivision (f) of Section 66260.200 of Title 22 of the California Code of Regulations with regard to treated metal shredder waste.(B)Completes the adoption of alternative management standards pursuant to this section.(k)The department shall complete the analysis described in paragraph (1) of subdivision (c) and subsequent regulatory action before January 1, 2018. All hazardous waste classifications and policies, procedures, or guidance issued by the department before January 1, 2014, governing or related to the generation, treatment, and management of metal shredder waste or treated metal shredder waste shall be inoperative and have no further effect on January 1, 2018, if the department completes its analysis pursuant to subdivision (c) and takes one of the following actions:(1)Rescinds the conditional nonhazardous waste classifications issued pursuant to subdivision (f) of Section 66260.200 of Title 22 of the California Code of Regulations with regard to that waste.(2)Adopts alternative management standards pursuant to this section.(l)The authority of the department to adopt original regulations pursuant to this section shall remain in effect only until January 1, 2018, unless a later enacted statute, which is enacted before January 1, 2018, deletes or extends that date. This subdivision does not invalidate any regulation adopted pursuant to this section before the expiration of the departments authority.(m)A regulation adopted pursuant to this section on or before January 1, 2018, shall continue in force and effect after that date, until repealed or revised by the department.SEC. 4.Section 25150.84 of the Health and Safety Code is repealed.25150.84.(a)The department shall collect an annual fee from all metal shredding facilities that are subject to the requirements of this chapter or to the alternative management standards adopted pursuant to Section 25150.82. The department shall establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse the costs of the department and the Office of Environmental Health Hazard Assessment to implement this chapter and Section 41514.6, as applicable to metal shredding facilities. The fee schedule established by the department may be updated periodically as necessary and shall provide for the assessment of no more than the reasonable and necessary costs of the department and the Office of Environmental Health Hazard Assessment to implement this chapter and Section 41514.6, as applicable to metal shredding facilities.(b)The Controller shall establish a separate subaccount in the Hazardous Waste Control Account. The fees collected pursuant to this section shall be deposited into the subaccount and be available for expenditure by the department or Office of Environmental Health Hazard Assessment upon appropriation by the Legislature.(c)A regulation adopted pursuant to this section may be adopted as an emergency regulation in accordance with Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, and for the purposes of that chapter, including Section 11349.6 of the Government Code, the adoption of these regulations is an emergency and shall be considered by the Office of Administrative Law as necessary for the immediate preservation of the public peace, health, safety, and general welfare. Notwithstanding Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 3 of Title 2 of the Government Code, an emergency regulation adopted by the department pursuant to this section shall be filed with, but not be repealed by, the Office of Administrative Law and shall remain in effect for a period of two years or until revised by the department, whichever occurs sooner.(d)(1)A metal shredding facility paying an annual fee in accordance with this section shall be exempt from the following fees as the fees pertain to metal shredding activities and the generation, handling, management, transportation, and disposal of metal shredder waste:(A)A fee imposed pursuant to Section 25205.7.(B)A disposal fee imposed pursuant to Section 25174.1 until July 1, 2022.(C)A facility fee imposed pursuant to Section 25205.2.(D)A fee imposed pursuant to Section 25205.5.(E)A transportable treatment unit fee imposed pursuant to Section 25205.14 until July 1, 2022, and Section 25205.2 on and after July 1, 2022.(2)A metal shredding facility is not exempt from the fees listed in paragraph (1) for any other hazardous waste the metal shredding facility generates and handles.SEC. 5.Section 25150.86 of the Health and Safety Code is repealed.25150.86.Treated metal shredder waste that is managed in accordance with the alternative management standards adopted by the department pursuant to Section 25180.82 and that is accepted by a solid waste landfill or other authorized location for disposal or for use as alternative daily cover or other beneficial use shall thereafter be deemed to be a solid waste for purposes of this chapter and Section 40191 of the Public Resources Code.SEC. 6.The Legislature finds and declares that metal shredding facilities are essential to a thriving circular economy in the State of California and the regulation of those facilities is a matter of statewide concern and is not a municipal affair as that term is used in Section 5 of Article XI of the California Constitution. Therefore, Section 1 of this act adding Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code applies to all cities, including charter cities.
SEC. 7.The Legislature finds and declares that Section 1 of this act, which adds Chapter 6.4 (commencing with Section 25095) to Division 20 of the Health and Safety Code, imposes a limitation on the publics right of access to the meetings of public bodies or the writings of public officials and agencies within the meaning of Section 3 of Article I of the California Constitution. Pursuant to that constitutional provision, the Legislature makes the following findings to demonstrate the interest protected by this limitation and the need for protecting that interest:
In order to protect proprietary business information from public disclosure, it is necessary for that information to remain confidential.
SEC. 8.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
|
Date
|
Status
|
|---|---|
| Mar 2, 2026 | Veto sustained. |
| Mar 2, 2026 | Stricken from file. |
| Oct 13, 2025 | In Senate. Consideration of Governor's veto pending. |
| Oct 13, 2025 | Vetoed by the Governor. |
| Sep 23, 2025 | Enrolled and presented to the Governor at 2 p.m. |
| Sep 13, 2025 | Assembly amendments concurred in. (Ayes 35. Noes 0. Page 3034.) Ordered to engrossing and enrolling. |
| Sep 13, 2025 | In Senate. Concurrence in Assembly amendments pending. |
| Sep 12, 2025 | Read third time. Passed. (Ayes 65. Noes 1. Page 3426.) Ordered to the Senate. |
| Sep 4, 2025 | Ordered to third reading. |
| Sep 4, 2025 | Read third time and amended. |
| Sep 4, 2025 | Read second time. Ordered to third reading. |
| Sep 3, 2025 | Read second time and amended. Ordered to second reading. |
| Sep 2, 2025 | From committee: Do pass as amended. (Ayes 11. Noes 0.) (August 29). |
| Aug 20, 2025 | August 20 set for first hearing. Placed on APPR. suspense file. |
| Jul 17, 2025 | Read second time and amended. Re-referred to Com. on APPR. |
| Jul 16, 2025 | From committee: Do pass as amended and re-refer to Com. on APPR. (Ayes 6. Noes 1.) (July 15). |
| Jul 7, 2025 | From committee with author's amendments. Read second time and amended. Re-referred to Com. on E.S & T.M. |
| Jun 5, 2025 | Referred to Com. on E.S & T.M. |
| May 29, 2025 | In Assembly. Read first time. Held at Desk. |
| May 29, 2025 | Read third time. Passed. (Ayes 36. Noes 0. Page 1337.) Ordered to the Assembly. |
| May 27, 2025 | Read second time. Ordered to third reading. |
| May 23, 2025 | From committee: Do pass as amended. (Ayes 6. Noes 0. Page 1199.) (May 23). |
| May 23, 2025 | Read second time and amended. Ordered to second reading. |
| May 16, 2025 | Set for hearing May 23. |
| May 5, 2025 | May 5 hearing: Placed on APPR. suspense file. |
| Apr 25, 2025 | Set for hearing May 5. |
| Apr 22, 2025 | Re-referred to Com. on APPR. |
| Apr 22, 2025 | Withdrawn from committee. |
| Apr 21, 2025 | From committee with author's amendments. Read second time and amended. Re-referred to Com. on JUD. |
| Apr 3, 2025 | From committee: Do pass and re-refer to Com. on JUD. (Ayes 7. Noes 0. Page 634.) (April 2). Re-referred to Com. on JUD. |
| Mar 24, 2025 | From committee with author's amendments. Read second time and amended. Re-referred to Com. on E.Q. |
| Mar 11, 2025 | Set for hearing April 2. |
| Mar 11, 2025 | March 19 set for first hearing canceled at the request of author. |
| Mar 7, 2025 | Set for hearing March 19. |
| Feb 26, 2025 | Referred to Coms. on E.Q. and JUD. |
| Feb 18, 2025 | From printer. May be acted upon on or after March 17. |
| Feb 14, 2025 | Introduced. Read first time. To Com. on RLS. for assignment. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Sep 13, 2025 | Unfinished Business SB404 Caballero et al. Concurrence | Senate Floor |
Passed |
|
| Sep 12, 2025 | Unfinished Business SB404 Caballero et al. Concurrence | Senate Floor |
Passed |
|
| Sep 12, 2025 | SB 404 Caballero Senate Third Reading By Blanca Rubio | Assembly Floor |
Passed |
|
| Aug 29, 2025 | Do pass as amended. | Assembly Standing Committee on Appropriations |
Passed |
|
| Jul 15, 2025 | Do pass as amended and be re-referred to the Committee on [Appropriations] | Assembly Standing Committee on Environmental Safety and Toxic Materials |
Passed |
|
| May 29, 2025 | Senate 3rd Reading SB404 Caballero et al. | Senate Floor |
Passed |
|
| May 23, 2025 | Do pass as amended | Senate Standing Committee on Appropriations |
Passed |
|
| May 5, 2025 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Apr 2, 2025 | Do pass, but first be re-referred to the Committee on [Judiciary] | Senate Standing Committee on Environmental Quality |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| a coalition of environmental justice organizations | ** Against | |
| Action Now | ** Against | |
| ACTIVE RECYCLING CO | ** Support | |
| Advantage Scrap Metal | ** Support | |
| Alameda County Office Of Education | ** Against | |
| American Dismantling Auto Parts | ** Support | |
| American HVAC Manufacturing | ** Support | |
| Arcata Scrap & Salvage | ** Support | |
| Asian Industry B2b | ** Against | |
| Auto Dismantlers Association | ** Support | |
| Beacon House Association of San Pedro | ** Support | |
| BobCo Metals | ** Support | |
| Boys & Girls Clubs of The Los Angeles Harbor | ** Support | |
| California African American Chamber Of Commerce | ** Against | |
| California Association of Environmental Health Administrators | ** Against | |
| California Black Chamber of Commerce | ** Against | |
| California Clothing Recyclers | ** Against | |
| California Communities Against Toxics | ** Against | |
| California Council For Environmental & Economic Balance (Cceeb) | ** Support | |
| California Council of the Plumbing, Heating and Piping Industry | ** Support | |
| California Hispanic Chambers Of Commerce | ** Support | |
| California Metal Recyclers Coalition | ** Support | |
| California Police Chiefs Association | ** Support | |
| California Professional Firefighters | ** Support | |
| California Safe Schools | ** Against | |
| California Small Business Association | ** Against | |
| California State Association Of Electrical Workers | ** Support | |
| California State Council Of Laborers | ** Support | |
| California State Pipe Trades Council | ** Support | |
| California Steel Industries, Inc. | ** Support | |
| California Strategies & Advocacy, LLC | ** Support | |
| Camarillo Recycling | ** Against | |
| Caravan Manufacturing | ** Support | |
| Cargill, Inc. | ** Against | |
| Cargill, Incorporated | ** Against | |
| Carson Chamber of Commerce | ** Support | |
| Central City Association Of Los Angeles | ** Support | |
| City of Los Angeles Councilmember, Tim McOsker | ** Support | |
| Clean Air Coalition of North Whittier and Avocado Heights | ** Against | |
| Clean Harbors | ** Against | |
| Coalition of California Utility Employees | ** Support | |
| Coalition of environmental justice organizations | ** Against | |
| Comite Civico Del Valle | ** Against | |
| Comite Pro Uno | ** Against | |
| County Of Alameda | ** Against | |
| Cr&R | ** Support | |
| Del Amo Action Committee | ** Against | |
| Dominguez & Sons Trucking | ** Support | |
| Earthjustice | ** Against | |
| East Yard Communities for Environmental Justice | ** Against | |
| Ecology Recycling Services | ** Support | |
| Eel River Transportation and Salvage | ** Support | |
| Express Auto Dismantlers | ** Support | |
| Garden Grove Chamber Of Commerce | ** Support | |
| G & O Truck Parts | ** Against | |
| Grand Vision Foundation | ** Support | |
| Greater Stockton Chamber of Commerce | ** Against | |
| Greenaction for Health and Environmental Justice | ** Against | |
| INTERNATIONAL LONGSHORE & WAREHOUSE UNION LOCAL 13 | ** Support | |
| INTERNATIONAL LONGSHORE & WAREHOUSE UNION LOCAL 63 | ** Support | |
| INTERNATIONAL LONGSHORE & WAREHOUSE UNION LOCAL 94 | ** Support | |
| JM Auto Dismantlers | ** Support | |
| Kramar's Iron and Metal Co. | ** Against | |
| Kramar's Iron & Metal Co. (Kramar) | ** Against | |
| Latino Caucus Of California Counties | ** Support | |
| Law Offices of Steven A. Fabbro | ** Support | |
| Legacy Hauling & Dismantlers | ** Support | |
| Lincoln Heights Community Coalition | ** Against | |
| Los Angeles Unified School District | ** Against | |
| National Federation Of Independent Business | ** Against | |
| Natural Resources Defense Council | ** Against | |
| Oakland Athletics | ** Against | |
| Office of the District Attorney of San Joaquin County | ** Support | |
| Pacific Auto Recycling Center | ** Against | |
| Pacific Auto Recycling Center (PARC) | ** Against | |
| PACIFIC STEEL GROUP (PSG) | ** Support | |
| PCEJ Action | ** Against | |
| Peace Officers Research Association of California (PORAC) | ** Support | |
| Penkor General Contractors | ** Support | |
| People's Collective for Environmental Justice | ** Against | |
| Philippine Action Group for the Environment | ** Against | |
| Port of Los Angeles | ** Support | |
| Pro SE Services | ** Support | |
| R&B Equipment | ** Support | |
| Recology Waste Zero | ** Support | |
| Recycled Materials Association - West Coast Chapter | ** Support | |
| Redondo Beach Chamber of Commerce | ** Support | |
| Republic Services, Inc. | ** Support | |
| Resource Recovery Coalition Of California | ** Support | |
| Rincon San Luiseno Band of Indians | ** Support | |
| San Francisco Baykeeper | ** Against | |
| San Joaquin County Sheriff - Public Administrator Patrick Withrow | ** Support | |
| san joaquin partnership | ** Support | |
| South Bay Association of Chambers of Commerce | ** Support | |
| South Bay Fabrication | ** Support | |
| South Colton Diversity Committee | ** Support | |
| SR Metals | ** Support | |
| Standard Iron & Metals Co. | ** Support | |
| State Of California Auto Dismantlers Association | ** Support | |
| Strength Based Community Change | ** Support | |
| Superior Storage Tanks | ** Support | |
| Supervisor Janice Hahn | ** Support | |
| United Chambers of Commerce of the San Fernando Valley | ** Against | |
| Universal Service Recycling | ** Against | |
| Universal Service Recycling Inc | ** Against | |
| UNIVERSAL SERVICE RECYCLING, INC. | ** Against | |
| Universal Service Recycling, Inc. (Universal) | ** Against | |
| Valley Industry and Commerce Association (VICA) | ** Against | |
| Waste Management | ** Support | |
| Western States Council Sheet Metal, Air, Rail And Transportation | ** Support | |
| West Oakland Environmental Indicators Project | ** Against | |
| West Oakland Environmental Indicators Project | ** Support | |
| Westside Recycling | ** Support | |
| Westside Self Service Auto Dismantlers | ** Support | |
| Wilmington Chamber of Commerce | ** Support |
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | SB 404 |
VETO
Bill No: SB 404
Author: Caballero (D), et al.
Enrolled: 9/17/25
Vote: 27
SENATE ENVIRONMENTAL QUALITY COMMITTEE: 7-0, 4/2/25
AYES: Blakespear, Dahle, Gonzalez, Hurtado, Menjivar, Padilla, Pérez
NO VOTE RECORDED: Valladares
SENATE APPROPRIATIONS COMMITTEE: 6-0, 5/23/25
AYES: Caballero, Seyarto, Cabaldon, Grayson, Richardson, Wahab
NO VOTE RECORDED: Dahle
SENATE FLOOR: 36-0, 5/29/25
AYES: Allen, Alvarado-Gil, Archuleta, Arreguín, Ashby, Becker, Blakespear, Cabaldon, Caballero, Cervantes, Cortese, Dahle, Durazo, Gonzalez, Grayson, Grove, Hurtado, Jones, Laird, McGuire, McNerney, Niello, Ochoa Bogh, Padilla, Pérez, Richardson, Rubio, Seyarto, Smallwood-Cuevas, Stern, Strickland, Umberg, Valladares, Wahab, Weber Pierson, Wiener
NO VOTE RECORDED: Choi, Limón, Menjivar, Reyes
SENATE FLOOR: 35-0, 9/13/25
AYES: Allen, Alvarado-Gil, Archuleta, Arreguín, Ashby, Becker, Blakespear, Cabaldon, Caballero, Cervantes, Cortese, Dahle, Durazo, Grayson, Grove, Hurtado, Jones, Laird, Limón, McGuire, McNerney, Niello, Ochoa Bogh, Padilla, Pérez, Reyes, Richardson, Rubio, Seyarto, Smallwood-Cuevas, Stern, Strickland, Umberg, Weber Pierson, Wiener
NO VOTE RECORDED: Choi, Gonzalez, Menjivar, Valladares, Wahab
ASSEMBLY FLOOR: 65-1, 9/12/25 - See last page for vote
SUBJECT: Hazardous materials: metal shredding facilities
SOURCE: Author
DIGEST:
This bill establishes a new regulatory structure at the Department of Toxic Substances Control for metal shredding facilities.
ANALYSIS:
Existing law:
1) Defines a “metal shredding facility” as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to help separate and sort ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials.
2) Allows DTSC in consultation with the Department of Resources Recycling and Recovery (CalRecycle), the State Water Resources Control Board (SWRCB), and local air districts to adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL).
3) Precludes DTSC from adopting management standards that are less stringent than standards set by federal law.
4) Allows waste from a metal shredder (known as metal shredder residue or MSR) to be classified and managed as nonhazardous waste, provided certain standards are met. Such nonhazardous waste can be used as alternative daily cover or for beneficial reuse, or it may be disposed of if it complies with regulations in the Water Code.
5) Allows DTSC to assess a fee on metal shredding facilities to cover the cost of the program.
6) Deems treated MSR managed under the standards set in law is solid waste when it is accepted by a solid waste landfill or other authorized location for disposal or for use as alternative daily cover or other beneficial use.
This bill:
1) Prohibits a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
2) Provides metal shredding facilities regulated under this bill are not hazardous waste facilities, but does not alter or override the authority of DTSC or a CUPA to regulate ancillary hazardous waste generated at a metal shredding facility.
3) Makes it clear local air pollution control districts, air quality management districts, CUPAs, and local environmental health departments do not lose any authority to regulate metal shredding facilities.
4) Authorizes DTSC to adopt, update and revise regulations to implement this bill.
5) Authorizes an existing metal shredding facility operating in compliance with this bill, to continue to operate pending final action on a permit application. Facilities must have developed and continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile volume and duration set forth in this bill. DTSC is permitted to take enforcement action against a non-compliant facility prior to issuing a final permit.
6) Requires DTSC, before issuing a permit, to determine the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
7) Requires DTSC to impose any additional facility-specific conditions necessary to ensure compliance with this bill and for the protection of human health and the environment.
8) Requires an applicant, before submitting a permit application or application for permit renewal, to hold at least one public meeting, or other community engagement activity approved by DTSC, to inform the community of metal processing activities and any potential impacts to nearby communities – and to solicit questions and input from the public.
9) Authorizes a metal shredding facility to make certain physical or operational changes to the facility without getting prior approval from DTSC.
10) Subjects metal shredder aggregate, including light fibrous material (LFM), which is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, to regulation as hazardous waste under the Hazardous Waste Control Law (HWCL), if it exhibits a characteristic of hazardous waste.
11) Requires a metal shredding facility to provide DTSC with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder.
12) Requires a metal shredding facility to establish an effective means of providing public notice to members of the surrounding community when a fire or other incident that poses a threat to human health or the environment outside of the facility takes place.
13) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this bill.
14) Exempts from the definition of hazardous waste, under the HWCL: chemically treated metal shredder residue (if treated according to the provisions of this bill); scrap metal; metal shredder aggregate (managed in accordance with the requirements of this bill); intermediate metal products that are subject to further processing to improve product quality; finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and, nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
Background
California Hazardous Waste Control Law (HWCL). The HWCL is the state's program that implements and enforces federal hazardous waste laws in California and directs DTSC to oversee and implement the state’s hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management lifecycle of hazardous waste, from generation, to management, transportation, and ultimately disposal into a state or federal authorized facility.
What Do Metal Shredders Do & Produce? DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials. There are about 10 metal shredding operations in the state today.
The Late 1980s to Today – A Brief History of Metal Shredding Regulation. Based on the hazardous characteristics of MSR, metal shredding facilities do generate hazardous waste and – prior to the late 1980s – were subject to hazardous waste requirements, including permitting, transportation and disposal.
However, in the late 1980s, in an effort to relax the requirements on metal shredding facilities, the Department of Health Services (DHS) – the predecessor of DTSC – determined treating MSR using chemical stabilization techniques could effectively eliminate the harm posed by MSR. As a result, this waste was determined – when properly treated – to no longer pose a significant hazard to human health and safety, livestock, and wildlife.
Following this determination, seven metal shredding facilities applied for and were granted nonhazardous waste classification letters by DHS, and later DTSC, as long as they used the metal treatment fixation technologies approved by the state. Known as “f letters,” these classifications ultimately allowed treated MSR to be handled, transported, and disposed of as non-hazardous waste in class III landfills (i.e., solid (non-hazardous) waste landfills).
SB 1249 (Hill, Chapter 756, Statutes of 2014). Following concerns about metal shredder safety, SB 1249 was enacted. The bill gave DTSC the authority to develop alternative management standards (different from a hazardous waste facility permit) if, after evaluating metal shredding facilities, DTSC determined alternative management standards would still protect the public and the environment.
SB 1249 gave DTSC a timeframe to develop and adopt alternative management standards that may have led to the elimination of the “f letter” process, but DTSC never adopted any standards and the authority to do so sunset under the terms of SB 1249.
Cue The Lawyers – Part One. More than a decade before the enactment of SB 1249, DTSC issued “Official Policy/Procedures #88-6 Auto Shredder Waste Policy and Procedures” – better known as OPP #88-6 – in November 1988. The policy classified metal shredder aggregate as in-process material, not a waste that needed to be regulated under the state’s HWCL.
More than 30 years after it was established – and 7 years after the passage of SB 1249 – OPP #88-6 was unilaterally administratively rescinded by DTSC in October 2021. DTSC stated the policy was inexact, self-contradictory and in conflict with federal and state law.
One month later, in November 2021, Pacific Auto Recycling Center (PARC) filed a complaint against DTSC asking for OPP #88-6 to be re-instated. PARC argued the DTSC policy was actually a regulation under the state’s Administrative Procedure Act (APA) and as such, DTSC couldn’t simply erase OPP #88-6 without going through the APA’s regulatory process.
In June 2023, the trial court agreed with PARC, ordered DTSC to re-instate OPP #88-6, and stated DTSC needed to go through the APA if it wished to rescind OPP #88-6.
Cue The Lawyers – Part 2. In November 2021, the Institute of Scrap Recycling Industries (ISRI) and several individual companies filed suit against DTSC following its adoption of emergency regulations to remove metal shredder aggregate – the ferrous and non-ferrous metals that are recycled – from the definition of scrap metal, which effectively subjected the material to the state’s HWCL.
In March 2022, the court granted ISRI’s request to prevent the regulation from taking effect but did not rule on the underlying merits of the case and after the injunction was granted, DTSC allowed the emergency regulation to expire. The remaining claims on the merits have been consolidated with a different 2019 case pending before the court and is expected to go to trial in late 2026.
Comments
1) I Fought The Law. If SB 404 becomes law, it would effectively end the litigation referenced in the “Background” section of this analysis, as well as other related lawsuits. This bill repeals OPP #88-6 and because SB 404 defines metal shredder aggregate as scrap metal and not hazardous waste, this bill also nullifies DTSC’s since-expired emergency regulation that sought to remove metal shredder aggregate from the definition of scrap metal.
2) Making Shredded MSR Non-Hazardous. As noted in the “Background” section, DHS – DTSC’s predecessor – determined in the 1980s that then-current metal treatment fixation technologies could lower the soluble concentrations of metals in MSR, making this treated waste “insignificant” as a hazard to human health and safety, livestock, and wildlife. Following that determination, a number of metal shredding facilities applied for and received nonhazardous waste determinations – known as “f letters” – from DHS, and later DTSC. As such, their treated MSR is regulated as nonhazardous waste provided they use the approved metal fixation treatment formulas and technologies to deal with their MSR.
This bill eliminates the “f-letter” process and allows chemically treated MSR to be used beneficially as alternative daily cover or otherwise disposed of in authorized solid waste landfills provided they adhere to or exceed the MSR treatment fixation technology standards set in this bill. Those that cannot meet the standards may alternatively handle MSR as hazardous waste.
3) Metal Shredder Aggregate, MSR, & DTSC Permitting. While this is a bit of an oversimplification, it may be helpful to think of metal shredding facilities as producing two main end products – metal shredder aggregate and MSR.
The metal shredder aggregate consists of the ferrous and nonferrous materials that are recycled and sold, while the MSR is just that – residue and waste that must be properly disposed of in accordance with standards set forth by this bill.
Under current law, DTSC, CalRecycle, the SWRCB, local air districts, and CUPAs can all adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the HWCL.
4) The Bottom Line – A Triple Venn Diagram. At its core, SB 404 deals with three different items or concepts that do overlap in places:
- Regulation of MSR. This is likely the least contentious portion of this bill. SB 404 states that if a facility treats MSR according to the standards set in this bill, that facility does not have to be classified as a hazardous waste facility. However, if a facility chooses not to treat MSR according to those standards, it can still operate but it does have to operate this portion of its business under a hazardous waste facility permit.
- Resolution of Lawsuits. SB 404 resolves a number of lawsuits involving DTSC, the metal shredding industry, and entities arguing they were impacted by a metal shredding facility. This includes not just the lawsuits mentioned in the “Background” section of this analysis, but a number of others, including some involving the former Oakland A’s. Opinions on whether this bill’s resolution of these suits is appropriate vary and likely depend on whether a party views itself as likely to win in court and/or achieve a better regulatory outcome via the courts and/or is in a position to garner attorneys fees should it prevail in court.
- Regulation of Metal Shredder Aggregate. This appears to be the most contentious part of SB 404.
Some opponents argue since this bill defines metal shredder aggregate as scrap metal, DTSC should not be involved in the regulatory process. They are further concerned adding a DTSC permitting process on top of the existing processes required by regional water boards, air districts, fire authorities, CUPAs, and others will complicate the permitting process without adding any value.
Other opponents argue the opposite side of the same coin, fearing under this bill DTSC is losing regulatory authority it has now and is not given enough new authority – or specific direction – to regulate entities, protect environmentally sensitive communities, and more.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: Yes
According to the Assembly Appropriations Committee, DTSC estimates ongoing costs of up to $1.6 million, though those costs will be reimbursed by permit fees the bill allows DTSC to charge. The Department of Justice (DOJ) anticipates costs of an unknown, but potentially significant, related to representing, litigating and doing enforcement work on behalf of DTSC.
Auto Dismantlers Association
Beacon House Association of San Pedro
Boys & Girls Clubs of The Los Angeles Harbor
California Council for Environmental & Economic Balance (CCEEB)
California Metal Recyclers Coalition
California Police Chiefs Association
California Professional Firefighters
California State Association of Electrical Workers
California State Council of Laborers
California State Pipe Trades Council
California Steel Industries, INC.
California Strategies & Advocacy, LLC
Central City Association of Los Angeles
Ecology Recycling Services
Grand Vision Foundation
Latino Caucus of California Counties
Pacific Steel Group (PSG)
Peace Officers Research Association of California (PORAC)
Recology Waste Zero
Recycled Materials Association - West Coast Chapter
Republic Services, Inc.
Resource Recovery Coalition of California
Rincon San Luiseno Band of Indians
South Colton Diversity Committee
Strength Based Community Change
Waste Management
Western States Council Sheet Metal, Air, Rail and Transportation
Wilmington Chamber of Commerce
OPPOSITION: (Verified 10/15/25)
Cargill, Inc.
Kramar's Iron and Metal Co.
Natural Resources Defense Council
Oakland Athletics
Pacific Auto Recycling Center
People's Collective for Environmental Justice
San Francisco Baykeeper
Universal Service Recycling, Inc.
Valley Industry and Commerce Association (VICA)
West Oakland Environmental Indicators Project
GOVERNOR'S VETO MESSAGE:
The bill would establish a comprehensive regulatory program for metal shredding facilities to be administered by the Department of Toxic Substances Control (DTSC) and would require metal shredding facilities to obtain a permit from DTSC.
I support the author's intent to create a uniform structure for permitting metal shredding facilities in California. These facilities are critical to maintaining supply chain stability, recycling millions of end-of-life vehicles, household appliances, and other metallic items produced, used, and discarded annually in California. Unless recycled, these metal materials would overwhelm available landfill capacity, creating a massive accumulation of damaged and abandoned cars, appliances, and other items.
However, this bill lacks clear definitions regarding the materials processed at these facilities, including what "hazardous waste" requirements are applicable. Without this clarity, this bill is not as protective, places a significant burden on DTSC, and cannot be successfully implemented.
I encourage the author to work closely with DTSC and interested parties to remedy this issue, as well as ensure that any future legislation requires metal shredding facilities operate, and be permitted to operate, in a health-protective manner.
For these reasons, I cannot sign this bill.
ASSEMBLY FLOOR: 65-1, 9/12/25
AYES: Addis, Aguiar-Curry, Ahrens, Alanis, Alvarez, Arambula, Ávila Farías, Bains, Bauer-Kahan, Boerner, Calderon, Caloza, Carrillo, Chen, Connolly, Davies, Dixon, Elhawary, Fong, Gabriel, Gallagher, Gipson, Jeff Gonzalez, Mark González, Hadwick, Harabedian, Hart, Hoover, Irwin, Jackson, Johnson, Kalra, Krell, Lee, Lowenthal, Macedo, McKinnor, Nguyen, Ortega, Pacheco, Papan, Patel, Patterson, Pellerin, Petrie-Norris, Quirk-Silva, Ramos, Ransom, Celeste Rodriguez, Michelle Rodriguez, Rogers, Blanca Rubio, Schiavo, Sharp-Collins, Solache, Soria, Stefani, Tangipa, Valencia, Wallis, Ward, Wicks, Wilson, Zbur, Rivas
NOES: Ellis
NO VOTE RECORDED: Bennett, Berman, Bonta, Bryan, Castillo, DeMaio, Flora, Garcia, Haney, Lackey, Muratsuchi, Sanchez, Schultz, Ta
Prepared by: Evan Goldberg / E.Q. / (916) 651-4108, Heather Walters / E.Q. / (916) 651-4108
10/15/25 16:43:12
**** END ****
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | SB 404 |
UNFINISHED BUSINESS
Bill No: SB 404
Author: Caballero (D), et al.
Amended: 9/4/25
Vote: 21
SENATE ENVIRONMENTAL QUALITY COMMITTEE: 7-0, 4/2/25
AYES: Blakespear, Dahle, Gonzalez, Hurtado, Menjivar, Padilla, Pérez
NO VOTE RECORDED: Valladares
SENATE APPROPRIATIONS COMMITTEE: 6-0, 5/23/25
AYES: Caballero, Seyarto, Cabaldon, Grayson, Richardson, Wahab
NO VOTE RECORDED: Dahle
SENATE FLOOR: 36-0, 5/29/25
AYES: Allen, Alvarado-Gil, Archuleta, Arreguín, Ashby, Becker, Blakespear, Cabaldon, Caballero, Cervantes, Cortese, Dahle, Durazo, Gonzalez, Grayson, Grove, Hurtado, Jones, Laird, McGuire, McNerney, Niello, Ochoa Bogh, Padilla, Pérez, Richardson, Rubio, Seyarto, Smallwood-Cuevas, Stern, Strickland, Umberg, Valladares, Wahab, Weber Pierson, Wiener
NO VOTE RECORDED: Choi, Limón, Menjivar, Reyes
ASSEMBLY FLOOR: 47-1, 9/12/25 – Roll call vote not available
SUBJECT: Hazardous materials: metal shredding facilities
SOURCE: Author
DIGEST:
This bill establishes a new regulatory structure at the Department of Toxic Substances Control for metal shredding facilities.
Assembly Amendments
1) Create a definition of a “small metal shredding facility” and limit the activities such facilities can conduct;
2) Clarify metal shredding facilities operating with an interim permit must have a fire prevention and response plan, and must comply with volume limits in the shredded material and feedstock piles;
3) Require facilities to have training plans to ensure employees can properly respond to fire and other emergency situations;
4) Clarify the timeline the Department of Toxic Substances Control (DTSC) must adhere to when it receives a permit application;
5) Clarify the ability of a certified uniform program agency (CUPA) to enforce the law is not impacted by this bill;
6) Impose limits on the volume of material that can be kept in feedstock and metal shredder aggregate piles to the amount of material that can be processed in a 24-hour period (feedstock piles) and a 48-hour period (aggregate piles);
7) Give DTSC more authority to deny or condition proposed facility modifications;
8) Provide further clarification on how DTSC can set and raise the fees charged to metal shredding facilities, as well as how the money is collected, where it is deposited, and how it can be spent;
9) Clarify DTSC’s enforcement authority, including its ability to suspend permits for an operator’s failure to adhere to the law;
10) Clarify all metal shredding facilities must implement fence-line air quality monitoring systems as required elsewhere in law; and
11) Include a number of other technical and clarifying changes.
ANALYSIS:
Existing law:
1) Defines a “metal shredding facility” as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to help separate and sort ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials.
2) Allows DTSC in consultation with the Department of Resources Recycling and Recovery (CalRecycle), the State Water Resources Control Board (SWRCB), and local air districts to adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL).
3) Precludes DTSC from adopting management standards that are less stringent than standards set by federal law.
4) Allows waste from a metal shredder (known as metal shredder residue or MSR) to be classified and managed as nonhazardous waste, provided certain standards are met. Such nonhazardous waste can be used as alternative daily cover or for beneficial reuse, or it may be disposed of if it complies with regulations in the Water Code.
5) Allows DTSC to assess a fee on metal shredding facilities to cover the cost of the program.
6) Deems treated MSR managed under the standards set in law is solid waste when it is accepted by a solid waste landfill or other authorized location for disposal or for use as alternative daily cover or other beneficial use.
This bill:
1) Prohibits a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
2) Provides metal shredding facilities regulated under this bill are not hazardous waste facilities, but does not alter or override the authority of DTSC or a CUPA to regulate ancillary hazardous waste generated at a metal shredding facility.
3) Makes it clear local air pollution control districts, air quality management districts, CUPAs, and local environmental health departments do not lose any authority to regulate metal shredding facilities.
4) Authorizes DTSC to adopt, update and revise regulations to implement this bill.
5) Authorizes an existing metal shredding facility operating in compliance with this bill, to continue to operate pending final action on a permit application. Facilities must have developed and continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile volume and duration set forth in this bill. DTSC is permitted to take enforcement action against a non-compliant facility prior to issuing a final permit.
6) Requires DTSC, before issuing a permit, to determine the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
7) Requires DTSC to impose any additional facility-specific conditions necessary to ensure compliance with this bill and for the protection of human health and the environment.
8) Requires an applicant, before submitting a permit application or application for permit renewal, to hold at least one public meeting, or other community engagement activity approved by DTSC, to inform the community of metal processing activities and any potential impacts to nearby communities – and to solicit questions and input from the public.
9) Authorizes a metal shredding facility to make certain physical or operational changes to the facility without getting prior approval from DTSC.
10) Subjects metal shredder aggregate, including light fibrous material (LFM), which is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, to regulation as hazardous waste under the Hazardous Waste Control Law (HWCL), if it exhibits a characteristic of hazardous waste.
11) Requires a metal shredding facility to provide DTSC with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder.
12) Requires a metal shredding facility to establish an effective means of providing public notice to members of the surrounding community when a fire or other incident that poses a threat to human health or the environment outside of the facility takes place.
13) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this bill.
14) Exempts from the definition of hazardous waste, under the HWCL: chemically treated metal shredder residue (if treated according to the provisions of this bill); scrap metal; metal shredder aggregate (managed in accordance with the requirements of this bill); intermediate metal products that are subject to further processing to improve product quality; finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and, nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
Background
California Hazardous Waste Control Law (HWCL). The HWCL is the state's program that implements and enforces federal hazardous waste laws in California and directs DTSC to oversee and implement the state’s hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management lifecycle of hazardous waste, from generation, to management, transportation, and ultimately disposal into a state or federal authorized facility.
What Do Metal Shredders Do & Produce? DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials. There are about 10 metal shredding operations in the state today.
The Late 1980s to Today – A Brief History of Metal Shredding Regulation. Based on the hazardous characteristics of MSR, metal shredding facilities do generate hazardous waste and – prior to the late 1980s – were subject to hazardous waste requirements, including permitting, transportation and disposal.
However, in the late 1980s, in an effort to relax the requirements on metal shredding facilities, the Department of Health Services (DHS) – the predecessor of DTSC – determined treating MSR using chemical stabilization techniques could effectively eliminate the harm posed by MSR. As a result, this waste was determined – when properly treated – to no longer pose a significant hazard to human health and safety, livestock, and wildlife.
Following this determination, seven metal shredding facilities applied for and were granted nonhazardous waste classification letters by DHS, and later DTSC, as long as they used the metal treatment fixation technologies approved by the state. Known as “f letters,” these classifications ultimately allowed treated MSR to be handled, transported, and disposed of as non-hazardous waste in class III landfills (i.e., solid (non-hazardous) waste landfills).
SB 1249 (Hill, Chapter 756, Statutes of 2014). Following concerns about metal shredder safety, SB 1249 was enacted. The bill gave DTSC the authority to develop alternative management standards (different from a hazardous waste facility permit) if, after evaluating metal shredding facilities, DTSC determined alternative management standards would still protect the public and the environment.
SB 1249 gave DTSC a timeframe to develop and adopt alternative management standards that may have led to the elimination of the “f letter” process, but DTSC never adopted any standards and the authority to do so sunset under the terms of SB 1249.
Cue The Lawyers – Part One. More than a decade before the enactment of SB 1249, DTSC issued “Official Policy/Procedures #88-6 Auto Shredder Waste Policy and Procedures” – better known as OPP #88-6 – in November 1988. The policy classified metal shredder aggregate as in-process material, not a waste that needed to be regulated under the state’s HWCL.
More than 30 years after it was established – and 7 years after the passage of SB 1249 – OPP #88-6 was unilaterally administratively rescinded by DTSC in October 2021. DTSC stated the policy was inexact, self-contradictory and in conflict with federal and state law.
One month later, in November 2021, Pacific Auto Recycling Center (PARC) filed a complaint against DTSC asking for OPP #88-6 to be re-instated. PARC argued the DTSC policy was actually a regulation under the state’s Administrative Procedure Act (APA) and as such, DTSC couldn’t simply erase OPP #88-6 without going through the APA’s regulatory process.
In June 2023, the trial court agreed with PARC, ordered DTSC to re-instate OPP #88-6, and stated DTSC needed to go through the APA if it wished to rescind OPP #88-6.
Cue The Lawyers – Part 2. In November 2021, the Institute of Scrap Recycling Industries (ISRI) and several individual companies filed suit against DTSC following its adoption of emergency regulations to remove metal shredder aggregate – the ferrous and non-ferrous metals that are recycled – from the definition of scrap metal, which effectively subjected the material to the state’s HWCL.
In March 2022, the court granted ISRI’s request to prevent the regulation from taking effect but did not rule on the underlying merits of the case and after the injunction was granted, DTSC allowed the emergency regulation to expire. The remaining claims on the merits have been consolidated with a different 2019 case pending before the court and is expected to go to trial in late 2026.
Comments
1) I Fought The Law. If this bill becomes law, it would effectively end the litigation referenced in the “Background” section of this analysis, as well as other related lawsuits. This bill repeals OPP #88-6 and because it defines metal shredder aggregate as scrap metal and not hazardous waste, this bill also nullifies DTSC’s since-expired emergency regulation that sought to remove metal shredder aggregate from the definition of scrap metal.
2) Making Shredded MSR Non-Hazardous. As noted in the “Background” section, DHS – DTSC’s predecessor – determined in the 1980s that then-current metal treatment fixation technologies could lower the soluble concentrations of metals in MSR, making this treated waste “insignificant” as a hazard to human health and safety, livestock, and wildlife. Following that determination, a number of metal shredding facilities applied for and received nonhazardous waste determinations – known as “f letters” – from DHS, and later DTSC. As such, their treated MSR is regulated as nonhazardous waste provided they use the approved metal fixation treatment formulas and technologies to deal with their MSR.
This bill eliminates the “f-letter” process and allows chemically treated MSR to be used beneficially as alternative daily cover or otherwise disposed of in authorized solid waste landfills provided they adhere to or exceed the MSR treatment fixation technology standards set in this bill. Those that cannot meet the standards may alternatively handle MSR as hazardous waste.
3) Metal Shredder Aggregate, MSR, & DTSC Permitting. While this is a bit of an oversimplification, it may be helpful to think of metal shredding facilities as producing two main end products – metal shredder aggregate and MSR.
The metal shredder aggregate consists of the ferrous and nonferrous materials that are recycled and sold, while the MSR is just that – residue and waste that must be properly disposed of in accordance with standards set forth by this bill.
Under current law, DTSC, CalRecycle, the SWRCB, local air districts, and CUPAs can all adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the HWCL.
4) The Bottom Line – A Triple Venn Diagram. At its core, SB 404 deals with three different items or concepts that do overlap in places:
- Regulation of MSR. This is likely the least contentious portion of this bill. SB 404 states that if a facility treats MSR according to the standards set in this bill, that facility does not have to be classified as a hazardous waste facility. However, if a facility chooses not to treat MSR according to those standards, it can still operate but it does have to operate this portion of its business under a hazardous waste facility permit.
- Resolution of Lawsuits. SB 404 resolves a number of lawsuits involving DTSC, the metal shredding industry, and entities arguing they were impacted by a metal shredding facility. This includes not just the lawsuits mentioned in the “Background” section of this analysis, but a number of others, including some involving the former Oakland A’s. Opinions on whether this bill’s resolution of these suits is appropriate vary and likely depend on whether a party views itself as likely to win in court and/or achieve a better regulatory outcome via the courts and/or is in a position to garner attorneys fees should it prevail in court.
- Regulation of Metal Shredder Aggregate. This appears to be the most contentious part of SB 404.
Some opponents argue since this bill defines metal shredder aggregate as scrap metal, DTSC should not be involved in the regulatory process. They are further concerned adding a DTSC permitting process on top of the existing processes required by regional water boards, air districts, fire authorities, CUPAs, and others will complicate the permitting process without adding any value.
Other opponents argue the opposite side of the same coin, fearing under this bill DTSC is losing regulatory authority it has now and is not given enough new authority – or specific direction – to regulate entities, protect environmentally sensitive communities, and more.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: Yes
According to the Assembly Appropriations Committee, DTSC estimates ongoing costs of up to $1.6 million, though those costs will be reimbursed by permit fees the bill allows DTSC to charge. The Department of Justice (DOJ) anticipates costs of an unknown, but potentially significant, related to representing, litigating and doing enforcement work on behalf of DTSC.
SUPPORT: (Verified 9/6/25)
Auto Dismantlers Association
Beacon House Association of San Pedro
Boys & Girls Clubs of The Los Angeles Harbor
California Council for Environmental & Economic Balance
California Metal Recyclers Coalition
California Police Chiefs Association
California Professional Firefighters
California State Association of Electrical Workers
California State Council of Laborers
California State Pipe Trades Council
California Steel Industries, INC.
California Strategies & Advocacy, LLC
Central City Association of Los Angeles
Ecology Recycling Services
Grand Vision Foundation
Latino Caucus of California Counties
Pacific Steel Group (PSG)
Peace Officers Research Association of California
Recology Waste Zero
Recycled Materials Association - West Coast Chapter
Republic Services, Inc.
Resource Recovery Coalition of California
Rincon San Luiseno Band of Indians
South Colton Diversity Committee
Strength Based Community Change
Waste Management
Western States Council Sheet Metal, Air, Rail and Transportation
Wilmington Chamber of Commerce
OPPOSITION: (Verified 9/6/25)
Cargill, Inc.
Kramar's Iron and Metal Co.
Natural Resources Defense Council
Oakland Athletics
Pacific Auto Recycling Center
People's Collective for Environmental Justice
San Francisco Baykeeper
Universal Service Recycling, Inc.
Valley Industry and Commerce Association
West Oakland Environmental Indicators Project
Prepared by: Evan Goldberg / E.Q. / (916) 651-4108, Heather Walters / E.Q. / (916) 651-4108
9/12/25 22:12:23
SENATE THIRD READING
STR Bill Id:SB 404
Author:(Caballero)
As Amended Ver:September 4, 2025
Majority vote
SUMMARY
Requires the owner or operator of a metal shredding facility to obtain a permit from the Department of Toxic Substances Control (DTSC). Prohibits a metal shredding facility from operating in the state without a permit, as specified. Provides that local and state regulators retain enforcement authority with respect to metal shredding facilities, as that authority exists under current law.
Major Provisions
1) Prohibits, unless otherwise specified, a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
2) Provides that metal shredding facilities that are subject to regulation and comply with the requirements of this bill are not hazardous waste facilities; however, further provides that this bill does not alter or override the authority of DTSC or a Unified Program Agency, to regulate ancillary hazardous waste generated at a metal shredding facility.
3) Provides that this bill does not limit the authority of a local air pollution control district or air quality management district, or the authority of a Unified Program Agency, or the authority of a local environmental health department that is not a Unified Program Agency.
4) Authorizes DTSC to adopt regulations as necessary to implement this bill, and thereafter to update and revise the regulations from time to time, consistent with the requirements of this bill.
5) Authorizes on and after the effective date of this bill an existing metal shredding facility, operating in compliance with the requirements of this bill, to continue to operate pending final action on a permit application as specified in this bill. Requires, without exception, the facility to have developed and continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in this bill. Provides that nothing herein shall prevent DTSC from taking enforcement action before issuance of a final permit.
6) Requires DTSC, before taking final action to issue a permit for a metal shredding facility under this bill, to determine, on the basis of substantial evidence, that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
7) Requires DTSC to impose any additional facility-specific conditions that are necessary to ensure compliance with this bill and for the protection of human health and the environment.
8) Requires, before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant to hold at least one public meeting, or other community engagement activity approved by DTSC, to inform the community of metal processing activities and any potential impacts to nearby communities and to solicit questions and input from the public.
9) Authorizes the owner or operator of a metal shredding facility to make specified physical or operational changes to the metal shredding facility without seeking prior approval from DTSC.
10) Requires metal shredder aggregate, including light fibrous material, which is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, to be subject to regulation as hazardous waste under the Hazardous Waste Control Law (HWCL), if it exhibits a characteristic of hazardous waste.
11) Requires the owner or operator of a metal shredding facility to provide DTSC with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder.
12) Requires the owner or operator of a metal shredding facility to establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility.
13) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this bill.
14) Exempts from the definition of hazardous waste, under the HWCL: chemically treated metal shredder residue (if treated according to the provisions of this bill); scrap metal; metal shredder aggregate (managed in accordance with the requirements of this bill); intermediate metal products that are subject to further processing to improve product quality; finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and, nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
COMMENTS
California Hazardous Waste Control Law (HWCL): The HWCL is the state's program that implements and enforces federal hazardous waste law in California and directs DTSC to oversee and implement the state's hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management of hazardous waste, including hazardous waste generation, management, transportation, and ultimately disposal into a state or federally authorized facility.
Metal shredder facilities: California law defines a "metal shredding facility" as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to facilitate the separation and sorting of ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials. A "metal shredding facility" does not include a feeder yard, a metal crusher, or a metal baler, if that facility does not otherwise conduct metal shredding operations. As such, most scrap metal recycling facilities would not be subject to any proposed regulations meant to manage the waste generated from metal shredding facilities.
Metal shredder waste: The shredding of scrap metal (e.g., end-of-life vehicles) results in a mixture of recyclable materials (e.g., ferrous metals and nonferrous metals) and non-recyclable material (i.e., metal shredder waste). Aggregate is generated after the initial separation of ferrous metals and consists of nonferrous metals that can be further recovered and metal shredder waste. Metal shredder waste consists mainly of glass, fiber, rubber, automobile fluids, dirt, and plastics in automobiles and household appliances that remain after the recyclable metals have been removed. Because scrap metal contains regulated hazardous constituents, it can contaminate and ultimately cause metal shredder waste to exhibit a characteristic of hazardous waste for toxicity.
Legislation to address impacts of metal shredding facilities: In 2014, Senator Jerry Hill introduced SB 1249 (Chapter 756), based in part on concerns about metal shredder safety due to recent fires at metal shredding facilities in his district, but also in response to the historic concerns about metal shredding facilities and their potential impact on the environment. The intent of the bill was that the conditional nonhazardous waste classifications, as documented through the historical "f letters," be revoked and that metal shredding facilities be thoroughly evaluated and regulated to ensure adequate protection of human health and the environment. SB 1249 was signed by the Governor and authorized DTSC to develop alternative management standards (different from a hazardous waste facility permit) if, after a comprehensive evaluation of metal shredding facilities, DTSC determined that alternative management standards were warranted.
DTSC's evaluation of metal shredding facilities: As part of SB 1249, DTSC conducted a multi-year evaluation of metal shredding facilities, issuing a draft report in 2018 and then issuing a final report in August of 2021 titled, "Evaluation and Analysis of Metal Shredding Facilities and Metal Shredder Wastes." According to the final report:
"DTSC reviewed hazardous waste management activities, current regulatory environmental oversight, and the history of releases, contamination, and enforcement actions at metal shredding facilities in California. DTSC also reviewed the current disposal practices of chemically treated metal shredder waste at municipal solid waste landfills to identify the potential for migration of contaminants to groundwater, surface water, and the air. The study team found numerous examples of accidents, improper storage of hazardous wastes, soil contamination, and releases of hazardous wastes that impacted the environment and surrounding communities at metal shredding facilities.
DTSC and other agencies have taken several enforcement actions against metal shredding facilities in response to these types of incidents. DTSC's efforts have allowed for it to gain a more thorough understanding of metal shredder operations, as well as of the ambiguities within the existing regulatory framework under which metal recyclers, including shredding facilities, have historically operated. Based on this evaluation, DTSC has determined that the point of generation of hazardous waste is at the shredder itself, meaning that various downstream activities performed at the facilities would be subject to the Hazardous Waste Control Law. Under the Hazardous Waste Control Law, entities who conduct hazardous waste treatment, storage, or disposal are required to apply for and receive a form of authorization from DTSC in order to operate. Based on the results of its evaluation and DTSC's updated understanding of these activities, metal shredding facilities would require a form of authorization from DTSC to continue to operate in the same manner."
This bill: SB 404 creates a regulatory structure in state law for metal shredding facilities. There are currently nine metal shredding facilities in the state, some operating under regulatory authorization from the 1980s and 1990s. Some facilities began the permitting process for a full hazardous waste facility permit and others may have less certain authorization. Having one clear regulatory structure for all metal shredding facilities in the state makes sense. Clear rules will be helpful for state and local regulators and facilities, and will help set the regulatory standard for future metal recycling facilities in the state.
According to the Author
"Metal shredding facilities recycle millions of end-of-life vehicles, household appliances, and other metallic items produced, used, and discarded annually in California. Unless recycled, these metal materials would rapidly overwhelm all available landfill capacity, creating a massive accumulation of damaged and abandoned cars, appliances, and other items.
Metal shredding poses environmental concerns to surrounding communities because the shredding process has the potential to release particulate materials and has a risk of causing fire. The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by the California Department of Toxics and Substances Control (DTSC). Without a comprehensive regulatory framework, DTSC on their own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation.
SB 404 will resolve this uncertainty, allow the pending litigation to be dismissed, and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC's authority. This bill will ensure that California remains a sustainability leader in "reducing, reusing and recycling" by fostering the recycling of scrap metal into new metal products, while at the same time protecting adjoining communities from environmental pollution."
Arguments in Support
According to the California Metal Recyclers Coalition:
"Metal shredding facilities provide an essential public service to many sectors of the economy, including state and municipal governments, California businesses and residents by providing a safe, reliable and environmentally responsible means of recycling the vast quantities of recyclable metal-containing materials that are generated in the state every day. These facilities successfully recycle millions of end-of-life vehicles, trucks, busses, household appliances, steel beams, rebar and other metallic construction materials, and thousands of other items ranging in size from a backyard barbeque to sections of the old San Francisco-Oakland Bay Bridge. More than ever, these facilities provide the only feasible and cost-effective means of dealing with the huge number of burned vehicles, household appliances and other metal items that are damaged or destroyed by the wildfires which are sweeping though our communities with distressing frequency.
These recycling operations produce thousands of tons of recycled ferrous and non-ferrous metal commodities that are sold to steel plants, smelters and foundries around the world to be used in the manufacturing of new products.
SB 404 solves a problem that has threatened the economic viability of metal shredding facilities for almost a decade—the lack of clarity around how these critical facilities should be regulated. Because scrap metal is exempt from regulation under the Hazardous Waste Control Law, facilities that recycle these valuable materials fall outside the permitting program administered by the Department of Toxic Substances Control (DTSC). This bill would establish a new regulatory program tailored specifically to this industry that would be administered by DTSC under new authority. Significant improvement has been achieved over the past few years, and the regulatory framework established by SB 404 will ensure that these important facilities continue to operate safely and in an environmentally protective manner. The operating and performance standards have been discussed at length with DTSC and are supported by members of the industry. California's metal shredders and DTSC agree that a comprehensive regulatory program that recognizes the unique nature and importance of scrap metal is in the best interest of the industry and the state."
Arguments in Opposition
According to a coalition of environmental justice organizations:
"The undersigned organizations respectfully oppose Senate Bill 404 (Caballero), which deprives communities near certain hazardous waste facilities of necessary human health and environmental protections required by California's hazardous waste laws. The bill's effort to create a separate, less comprehensive regulatory regime for metal shredding facilities does not solve, and may even exacerbate, these threats.
Metal shredder aggregate is hazardous waste and must be regulated as such under the hazardous waste law. Contrary to the bill's overly complicated approach, California should regulate metal shredding facilities under the existing hazardous waste requirements, including by promptly requiring the facilities to obtain hazardous waste permits with conditions necessary to protect human health and the environment. The Department of Toxic Substances Control ("DTSC") should then be directed to develop additional requirements, within the existing hazardous waste legal framework, tailored to address the ongoing problems we've seen at metal shredding facilities—including fires and dispersal of heavy metals into surrounding communities.
While this particular bill addresses metal shredding facilities, the approach it takes is part of a problematic trend that deprives overburdened communities of protection from the dangers of hazardous waste mismanagement. California should prioritize moving forward with available authority and under the existing framework to safeguard its communities and environment from toxic pollution. While we agree with the need to address the threats posed by metal shredding facilities to communities, this bill as written moves in the opposite direction."
According to Universal Service Recycling, Inc. (Universal), Pacific Auto Recycling Center (PARC), and Kramar's Iron & Metal Co. (Kramar):
"[Universal, PARC, and Kramar], three small businesses that have recycled metals in California for decades, are regrettably opposed to SB 404 unless it is amended to eliminate the duplicative, overly burdensome, and costly requirements it would impose on our businesses.
Metal shredding and recycling is a critical circular economy and environmental protection measure in California. Small metal recyclers assist in the statewide recovery of valuable secondary metals, separating and bundling them into compact and transportable bales that can be sold as raw materials for manufacturing new metal products, such as rebar used for building and transportation projects. Small metal recyclers also play an important role in the cleanup process that follows natural disasters, such as the catastrophic wildfires that impacted Los Angeles communities earlier this year, and also support local economies in disadvantaged communities for the many jobbers who collect and sell scrap metal to our facilities.
One of our primary concerns is that, despite properly defining "metal shredder aggregate" as a material in process and not a waste, the bill then goes on to create a surrogate hazardous waste permitting program for metal shredder aggregate. This approach greatly expands the Department of Toxic Substances Control's (DTSC) jurisdiction beyond management of hazardous waste into management of an entire production process, and an entire business operation. It would authorize DTSC to regulate valuable secondary materials that are still in process in the same way they regulate hazardous waste. We have significant concerns about expanding DTSC's jurisdiction into a production process, and in particular, the authority given to DTSC in Article 8 to entirely shut down a business without due process.
We urge the Committee to request that the author reconsider our proposed amendments because they focus the bill on activities within DTSC's jurisdiction - on the management of hazardous waste and providing regulatory certainty for the onsite treatment of hazardous waste that occurs at some large metal shredding facilities."
FISCAL COMMENTS
According to the Assembly Appropriations Committee, enactment of this bill could cost DTSC approximately $1.6 million annually and four positions to cover its oversight and regulatory costs. The bill requires that all of DTSC's costs be reimbursed by an annual fee imposed on metal shredding facilities, as well as via a reimbursement agreement to cover the department's direct costs related to processing permit applications.
VOTES
SENATE FLOOR: 36-0-4
YES: Allen, Alvarado-Gil, Archuleta, Arreguín, Ashby, Becker, Blakespear, Cabaldon, Caballero, Cervantes, Cortese, Dahle, Durazo, Gonzalez, Grayson, Grove, Hurtado, Jones, Laird, McGuire, McNerney, Niello, Ochoa Bogh, Padilla, Pérez, Richardson, Rubio, Seyarto, Smallwood-Cuevas, Stern, Strickland, Umberg, Valladares, Wahab, Weber Pierson, Wiener
ABS, ABST OR NV: Choi, Limón, Menjivar, Reyes
ASM ENVIRONMENTAL SAFETY AND TOXIC MATERIALS: 6-1-0
YES: Connolly, Bauer-Kahan, Castillo, Lee, McKinnor, Papan
NO: Ellis
ASM APPROPRIATIONS: 11-0-4
YES: Wicks, Arambula, Calderon, Caloza, Elhawary, Fong, Mark González, Ahrens, Pacheco, Pellerin, Solache
ABS, ABST OR NV: Sanchez, Dixon, Ta, Tangipa
UPDATED
VERSION: September 4, 2025
CONSULTANT: Josh Tooker / E.S. & T.M. / (916) 319-3965 FN: 0001717
SENATE THIRD READING
STR Bill Id:SB 404
Author:(Caballero)
As Amended Ver:July 17, 2025
Majority vote
SUMMARY
Requires the owner or operator of a metal shredding facility to obtain a permit from the Department of Toxic Substances Control (DTSC). Prohibits a metal shredding facility from operating in the state without a permit, as specified. Provides that local and state regulators retain enforcement authority with respect to metal shredding facilities, as that authority exists under current law.
Major Provisions
1) Prohibits, unless otherwise specified, a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
2) Provides that metal shredding facilities that are subject to regulation and comply with the requirements of this bill are not hazardous waste facilities; however, further provides that this bill does not alter or override the authority of DTSC or a Unified Program Agency, to regulate ancillary hazardous waste generated at a metal shredding facility.
3) Provides that this bill does not limit the authority of a local air pollution control district or air quality management district, or the authority of a Unified Program Agency, or the authority of a local environmental health department that is not a Unified Program Agency.
4) Authorizes DTSC to adopt regulations as necessary to implement this bill, and thereafter to update and revise the regulations from time to time, consistent with the requirements of this bill.
5) Authorizes on and after the effective date of this bill an existing metal shredding facility, operating in compliance with the requirements of this bill, to continue to operate pending final action on a permit application as specified in this bill. Requires, without exception, the facility to have developed and continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in this bill. Provides that nothing herein shall prevent DTSC from taking enforcement action before issuance of a final permit.
6) Requires DTSC, before taking final action to issue a permit for a metal shredding facility under this bill, to determine, on the basis of substantial evidence, that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities.
7) Requires DTSC to impose any additional facility-specific conditions that are necessary to ensure compliance with this bill and for the protection of human health and the environment.
8) Requires, before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant to hold at least one public meeting, or other community engagement activity approved by DTSC, to inform the community of metal processing activities and any potential impacts to nearby communities and to solicit questions and input from the public.
9) Authorizes the owner or operator of a metal shredding facility to make specified physical or operational changes to the metal shredding facility without seeking prior approval from DTSC.
10) Requires metal shredder aggregate, including light fibrous material, which is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, to be subject to regulation as hazardous waste under the Hazardous Waste Control Law (HWCL), if it exhibits a characteristic of hazardous waste.
11) Requires the owner or operator of a metal shredding facility to provide DTSC with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder.
12) Requires the owner or operator of a metal shredding facility to establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility.
13) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this bill.
14) Exempts from the definition of hazardous waste, under the HWCL: chemically treated metal shredder residue (if treated according to the provisions of this bill); scrap metal; metal shredder aggregate (managed in accordance with the requirements of this bill); intermediate metal products that are subject to further processing to improve product quality; finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and, nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
COMMENTS
California Hazardous Waste Control Law (HWCL): The HWCL is the state's program that implements and enforces federal hazardous waste law in California and directs DTSC to oversee and implement the state's hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management of hazardous waste, including hazardous waste generation, management, transportation, and ultimately disposal into a state or federally authorized facility.
Metal shredder facilities: California law defines a "metal shredding facility" as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to facilitate the separation and sorting of ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials. A "metal shredding facility" does not include a feeder yard, a metal crusher, or a metal baler, if that facility does not otherwise conduct metal shredding operations. As such, most scrap metal recycling facilities would not be subject to any proposed regulations meant to manage the waste generated from metal shredding facilities.
Metal shredder waste: The shredding of scrap metal (e.g., end-of-life vehicles) results in a mixture of recyclable materials (e.g., ferrous metals and nonferrous metals) and non-recyclable material (i.e., metal shredder waste). Aggregate is generated after the initial separation of ferrous metals and consists of nonferrous metals that can be further recovered and metal shredder waste. Metal shredder waste consists mainly of glass, fiber, rubber, automobile fluids, dirt, and plastics in automobiles and household appliances that remain after the recyclable metals have been removed. Because scrap metal contains regulated hazardous constituents, it can contaminate and ultimately cause metal shredder waste to exhibit a characteristic of hazardous waste for toxicity.
Legislation to address impacts of metal shredding facilities: In 2014, Senator Jerry Hill introduced SB 1249 (Chapter 756), based in part on concerns about metal shredder safety due to recent fires at metal shredding facilities in his district, but also in response to the historic concerns about metal shredding facilities and their potential impact on the environment. The intent of the bill was that the conditional nonhazardous waste classifications, as documented through the historical "f letters," be revoked and that metal shredding facilities be thoroughly evaluated and regulated to ensure adequate protection of human health and the environment. SB 1249 was signed by the Governor and authorized DTSC to develop alternative management standards (different from a hazardous waste facility permit) if, after a comprehensive evaluation of metal shredding facilities, DTSC determined that alternative management standards were warranted.
DTSC's evaluation of metal shredding facilities: As part of SB 1249, DTSC conducted a multi-year evaluation of metal shredding facilities, issuing a draft report in 2018 and then issuing a final report in August of 2021 titled, "Evaluation and Analysis of Metal Shredding Facilities and Metal Shredder Wastes." According to the final report:
"DTSC reviewed hazardous waste management activities, current regulatory environmental oversight, and the history of releases, contamination, and enforcement actions at metal shredding facilities in California. DTSC also reviewed the current disposal practices of chemically treated metal shredder waste at municipal solid waste landfills to identify the potential for migration of contaminants to groundwater, surface water, and the air. The study team found numerous examples of accidents, improper storage of hazardous wastes, soil contamination, and releases of hazardous wastes that impacted the environment and surrounding communities at metal shredding facilities.
DTSC and other agencies have taken several enforcement actions against metal shredding facilities in response to these types of incidents. DTSC's efforts have allowed for it to gain a more thorough understanding of metal shredder operations, as well as of the ambiguities within the existing regulatory framework under which metal recyclers, including shredding facilities, have historically operated. Based on this evaluation, DTSC has determined that the point of generation of hazardous waste is at the shredder itself, meaning that various downstream activities performed at the facilities would be subject to the Hazardous Waste Control Law. Under the Hazardous Waste Control Law, entities who conduct hazardous waste treatment, storage, or disposal are required to apply for and receive a form of authorization from DTSC in order to operate. Based on the results of its evaluation and DTSC's updated understanding of these activities, metal shredding facilities would require a form of authorization from DTSC to continue to operate in the same manner."
This bill: SB 404 creates a regulatory structure in state law for metal shredding facilities. There are currently nine metal shredding facilities in the state, some operating under regulatory authorization from the 1980s and 1990s. Some facilities began the permitting process for a full hazardous waste facility permit and others may have less certain authorization. Having one clear regulatory structure for all metal shredding facilities in the state makes sense. Clear rules will be helpful for state and local regulators and facilities, and will help set the regulatory standard for future metal recycling facilities in the state.
According to the Author
"Metal shredding facilities recycle millions of end-of-life vehicles, household appliances, and other metallic items produced, used, and discarded annually in California. Unless recycled, these metal materials would rapidly overwhelm all available landfill capacity, creating a massive accumulation of damaged and abandoned cars, appliances, and other items.
Metal shredding poses environmental concerns to surrounding communities because the shredding process has the potential to release particulate materials and has a risk of causing fire. The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by the California Department of Toxics and Substances Control (DTSC). Without a comprehensive regulatory framework, DTSC on their own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation.
SB 404 will resolve this uncertainty, allow the pending litigation to be dismissed, and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC's authority. This bill will ensure that California remains a sustainability leader in "reducing, reusing and recycling" by fostering the recycling of scrap metal into new metal products, while at the same time protecting adjoining communities from environmental pollution."
Arguments in Support
According to the California Metal Recyclers Coalition:
"Metal shredding facilities provide an essential public service to many sectors of the economy, including state and municipal governments, California businesses and residents by providing a safe, reliable and environmentally responsible means of recycling the vast quantities of recyclable metal-containing materials that are generated in the state every day. These facilities successfully recycle millions of end-of-life vehicles, trucks, busses, household appliances, steel beams, rebar and other metallic construction materials, and thousands of other items ranging in size from a backyard barbeque to sections of the old San Francisco-Oakland Bay Bridge. More than ever, these facilities provide the only feasible and cost-effective means of dealing with the huge number of burned vehicles, household appliances and other metal items that are damaged or destroyed by the wildfires which are sweeping though our communities with distressing frequency.
These recycling operations produce thousands of tons of recycled ferrous and non-ferrous metal commodities that are sold to steel plants, smelters and foundries around the world to be used in the manufacturing of new products.
SB 404 solves a problem that has threatened the economic viability of metal shredding facilities for almost a decade—the lack of clarity around how these critical facilities should be regulated. Because scrap metal is exempt from regulation under the Hazardous Waste Control Law, facilities that recycle these valuable materials fall outside the permitting program administered by the Department of Toxic Substances Control (DTSC). This bill would establish a new regulatory program tailored specifically to this industry that would be administered by DTSC under new authority. Significant improvement has been achieved over the past few years, and the regulatory framework established by SB 404 will ensure that these important facilities continue to operate safely and in an environmentally protective manner. The operating and performance standards have been discussed at length with DTSC and are supported by members of the industry. California's metal shredders and DTSC agree that a comprehensive regulatory program that recognizes the unique nature and importance of scrap metal is in the best interest of the industry and the state."
Arguments in Opposition
According to a coalition of environmental justice organizations:
"The undersigned organizations respectfully oppose Senate Bill 404 (Caballero), which deprives communities near certain hazardous waste facilities of necessary human health and environmental protections required by California's hazardous waste laws. The bill's effort to create a separate, less comprehensive regulatory regime for metal shredding facilities does not solve, and may even exacerbate, these threats.
Metal shredder aggregate is hazardous waste and must be regulated as such under the hazardous waste law. Contrary to the bill's overly complicated approach, California should regulate metal shredding facilities under the existing hazardous waste requirements, including by promptly requiring the facilities to obtain hazardous waste permits with conditions necessary to protect human health and the environment. The Department of Toxic Substances Control ("DTSC") should then be directed to develop additional requirements, within the existing hazardous waste legal framework, tailored to address the ongoing problems we've seen at metal shredding facilities—including fires and dispersal of heavy metals into surrounding communities.
While this particular bill addresses metal shredding facilities, the approach it takes is part of a problematic trend that deprives overburdened communities of protection from the dangers of hazardous waste mismanagement. California should prioritize moving forward with available authority and under the existing framework to safeguard its communities and environment from toxic pollution. While we agree with the need to address the threats posed by metal shredding facilities to communities, this bill as written moves in the opposite direction."
According to Universal Service Recycling, Inc. (Universal), Pacific Auto Recycling Center (PARC), and Kramar's Iron & Metal Co. (Kramar):
"[Universal, PARC, and Kramar], three small businesses that have recycled metals in California for decades, are regrettably opposed to SB 404 unless it is amended to eliminate the duplicative, overly burdensome, and costly requirements it would impose on our businesses.
Metal shredding and recycling is a critical circular economy and environmental protection measure in California. Small metal recyclers assist in the statewide recovery of valuable secondary metals, separating and bundling them into compact and transportable bales that can be sold as raw materials for manufacturing new metal products, such as rebar used for building and transportation projects. Small metal recyclers also play an important role in the cleanup process that follows natural disasters, such as the catastrophic wildfires that impacted Los Angeles communities earlier this year, and also support local economies in disadvantaged communities for the many jobbers who collect and sell scrap metal to our facilities.
One of our primary concerns is that, despite properly defining "metal shredder aggregate" as a material in process and not a waste, the bill then goes on to create a surrogate hazardous waste permitting program for metal shredder aggregate. This approach greatly expands the Department of Toxic Substances Control's (DTSC) jurisdiction beyond management of hazardous waste into management of an entire production process, and an entire business operation. It would authorize DTSC to regulate valuable secondary materials that are still in process in the same way they regulate hazardous waste. We have significant concerns about expanding DTSC's jurisdiction into a production process, and in particular, the authority given to DTSC in Article 8 to entirely shut down a business without due process.
We urge the Committee to request that the author reconsider our proposed amendments because they focus the bill on activities within DTSC's jurisdiction - on the management of hazardous waste and providing regulatory certainty for the onsite treatment of hazardous waste that occurs at some large metal shredding facilities."
FISCAL COMMENTS
According to the Assembly Appropriations Committee, enactment of this bill could cost DTSC approximately $1.6 million annually and four positions to cover its oversight and regulatory costs. The bill requires that all of DTSC's costs be reimbursed by an annual fee imposed on metal shredding facilities, as well as via a reimbursement agreement to cover the department's direct costs related to processing permit applications.
VOTES
SENATE FLOOR: 36-0-4
YES: Allen, Alvarado-Gil, Archuleta, Arreguín, Ashby, Becker, Blakespear, Cabaldon, Caballero, Cervantes, Cortese, Dahle, Durazo, Gonzalez, Grayson, Grove, Hurtado, Jones, Laird, McGuire, McNerney, Niello, Ochoa Bogh, Padilla, Pérez, Richardson, Rubio, Seyarto, Smallwood-Cuevas, Stern, Strickland, Umberg, Valladares, Wahab, Weber Pierson, Wiener
ABS, ABST OR NV: Choi, Limón, Menjivar, Reyes
ASM ENVIRONMENTAL SAFETY AND TOXIC MATERIALS: 6-1-0
YES: Connolly, Bauer-Kahan, Castillo, Lee, McKinnor, Papan
NO: Ellis
ASM APPROPRIATIONS: 11-0-4
YES: Wicks, Arambula, Calderon, Caloza, Elhawary, Fong, Mark González, Ahrens, Pacheco, Pellerin, Solache
ABS, ABST OR NV: Sanchez, Dixon, Ta, Tangipa
UPDATED
VERSION: July 17, 2025
CONSULTANT: Josh Tooker / E.S. & T.M. / (916) 319-3965 FN: 0001498
Date of Hearing: August 20, 2025
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
SBPCA Bill Id:SB 404
Author:(Caballero) – As Amended Ver:July 17, 2025
Policy Committee: | Environmental Safety and Toxic Materials | Vote: | 6 - 1 |
|
| ||
|
|
Urgency: No State Mandated Local Program: Yes Reimbursable: No
SUMMARY:
This bill establishes a new regulatory structure at the Department of Toxic Substances Control (DTSC) for metal shredding facilities, separate from laws governing the control of hazardous waste.
Specifically, this bill, among other things:
1) Provides that a metal shredding facility that is subject to regulation and complies with the requirements of this bill is not a hazardous waste facility. However, further provides that this bill does not alter or override the authority of DTSC or a Unified Program Agency to regulate ancillary hazardous waste generated at a metal shredding facility in accordance with Chapter 6.5 of Title 22 of the California Code of Regulations (the state’s hazardous waste control law (HWCL)).
2) Requires DTSC to adopt regulations related to the imposition of fees on metal shredding facilities, allows DTSC to use emergency regulations for this purpose, and authorizes the department to adopt and update regulations as necessary to implement the remaining provisions of this bill.
3) Requires a metal shredding facility to receive a permit from DTSC to operate in the state and specifies numerous requirements and procedures, including, among other things, requirements for obtaining a permit, for being deemed to have a permit, for operating a metal shredding facility, for managing metal shredder aggregate, for transporting certain materials related to metal shredding, for providing notice, and for maintaining a closure plan.
4) Requires DTSC, among many other things, to hold a public meeting before making a decision to approve or deny an application, to take final action on a permit application by an existing facility within three years, as provided, to post on its website general information about each metal shredding facility that has applied for or obtained a permit, and to conduct at least one site visit to the applicant’s facility after receipt of a permit application.
5) Requires DTSC to collect an annual fee from each metal shredding facility subject to the requirements of this bill at a rate sufficient to reimburse the department’s reasonable costs to implement all aspects of this bill, other than costs incurred in connection with DTSC’s review and issuance of metal shredding facility permits. Requires the fee established pursuant to this bill be deposited in the Metal Shredders Facility Account (MSFA) and to be sufficient to reimburse the department’s reasonable costs to implement AB 2851 (Bonta), Chapter 743, Statutes of 2024 (related to fence-line air quality monitoring at metal shredding facilities), as provided. Allows DTSC’s Board of Environmental Safety (BES) to annually adjust fees, and specifies factors DTSC must consider in establishing the fee amount. Exempts a metal shredding facility paying an annual fee in accordance with this bill from certain existing fees, except as specified.
6) Requires a person who applies for a metal shredding facility permit under this bill to enter into a written agreement with DTSC to reimburse the department for the direct costs reasonably incurred by the department in processing the application, as specified. Requires this agreement to provide for a 25% advance payment. Requires an applicant for a metal shredding facility permit to also pay all costs incurred by DTSC for purposes of complying with the California Environmental Quality Act (CEQA).
7) Provides that certain authority granted to DTSC in Chapter 6.5 and its implementing regulations may be used to enforce this bill, as specified. Authorizes DTSC, under specified conditions, to order the temporary cessation of shredder operations, prohibit the receipt of additional shredder feedstock by the facility, and prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis. Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under specified conditions.
FISCAL EFFECT:
1) DTSC estimates ongoing costs of up to $1.6 million (MSFA, other funds) and four positions to cover is oversight and regulatory costs. The bill requires that all of DTSC’s costs be reimbursed by an annual fee imposed on metal shredding facilities, as well as via a reimbursement agreement to cover the department’s direct costs related to processing permit applications. DTSC notes its cost estimates are based on the workload related to its oversight of metal shredding facilities currently operating in the state, and that an increase in the number of facilities seeking permits may necessitate additional resources. The bill does not include a fund source for startup and initial implementation costs; DTSC would need a loan from a different fund for this purpose, which it would reimburse after sufficient revenues accumulate in the MSFA.
2) The Department of Justice (DOJ) anticipates costs of an unknown, but potentially significant, amount (Legal Services Revolving Fund, General Fund) related to client (DTSC) representation, litigation, and enforcement-related work.
3) Cost pressures (Trial Court Trust Fund, General Fund) of an unknown amount to the courts to adjudicate civil or criminal actions authorized by this bill. Actual costs will depend on the number of cases filed and the amount of court time needed to resolve each case. It generally costs approximately $1,000 to operate a courtroom for one hour. Although courts are not funded on the basis of workload, increased pressure on the Trial Court Trust Fund may create a demand for increased funding for courts from the General Fund. The fiscal year 2025-26 state budget provides $82 million ongoing General Fund to the Trial Court Trust Fund for court operations.
COMMENTS:
1) Purpose. According to the author:
The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by [DTSC]. Without a comprehensive regulatory framework, DTSC on their own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation. SB 404 will resolve this uncertainty, allow the pending litigation to be dismissed, and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC’s authority.
2) Background. DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials. There are currently nine metal shredding facilities in the state, some operating under regulatory authorization from the 1980s and 1990s. As discussed at length in the Assembly Environmental Safety and Toxic Materials Committee’s analysis of this bill, some facilities began the permitting process for a full hazardous waste facility permit and others may have less certain authorization.
Among others in support of the bill, the California Metal Recyclers Coalition argues this bill “solves a problem that has threatened the economic viability of metal shredding facilities for almost a decade—the lack of clarity around how these critical facilities should be regulated.” Because scrap metal is exempt from regulation under the HWCL, facilities that recycle these materials fall outside DTSC’s permitting program. The coalition argues this bill establishes a new regulatory program tailored specifically to this industry that would be administered by DTSC under new authority. The coalition writes the state’s metal shredders and DTSC “agree that a comprehensive regulatory program that recognizes the unique nature and importance of scrap metal is in the best interest of the industry and the state."
Among others in opposition, a coalition of environmental justice organizations argues this bill “deprives communities near certain hazardous waste facilities of necessary human health and environmental protections required by California’s hazardous waste laws,” and that “the bill’s effort to create a separate, less comprehensive regulatory regime for metal shredding facilities does not solve, and may even exacerbate, these threats.” Specifically, the coalition writes:
Metal shredder aggregate is hazardous waste and must be regulated as such under the hazardous waste law. Contrary to the bill’s overly complicated approach, California should regulate metal shredding facilities under the existing hazardous waste requirements, including by promptly requiring the facilities to obtain hazardous waste permits with conditions necessary to protect human health and the environment. [DTSC] should then be directed to develop additional requirements, within the existing hazardous waste legal framework, tailored to address the ongoing problems we’ve seen at metal shredding facilities—including fires and dispersal of heavy metals into surrounding communities.
Clean Harbors, which operates several permitted hazardous waste facilities in the state, asserts that, absent mention of a specific fund source in the bill to fund DTSC’s startup costs, it is highly likely the department will rely on the Hazardous Waste Facility Account (HWFA) for a loan before it begins assessing the annual fee on metal shredding facilities. The HWFA is funded by facility fees paid by the state’s existing permitted hazardous waste facilities for DTSC’s oversight activities at those facilities. In August 2024, the BES voted to raise the rates for, among other things, the facility fee, to create a 5% reserve in DTSC’s main funding accounts. Clean Harbors requests that any HWFA expenditures to support implementation of this bill be reimbursed by the metal shredding facilities that opt into the new regulatory program proposed by this bill.
3) Prior Legislation. SB 1234 (Allen), of the 2023-2024 Legislative Session, would have similarly established a new regulatory structure at DTSC for metal shredding facilities. SB 1234 was held on this committee’s suspense file.
Analysis Prepared by: Nikita Koraddi / APPR. / (916) 319-2081
Date of Hearing: July 15, 2025
ASSEMBLY COMMITTEE ON ENVIRONMENTAL SAFETY AND TOXIC MATERIALS
Damon Connolly, Chair
SBPCA Bill Id:SB 404
Author:(Caballero) – As Amended Ver:May 23, 2025
SENATE VOTE: 36-0
SUBJECT: Hazardous materials: metal shredding facilities
SUMMARY: Requires the owner or operator of a metal shredding facility to obtain a permit from the Department of Toxic Substances Control (DTSC). Prohibits a metal shredding facility from operating in the state without a permit. Includes within the permit: requirements for managing various wastes within and leaving the facility, measures to prevent fires; and measures to reduce impacts to communities near the facility. Provides that local and state regulators retain enforcement authority with respect to metal shredding facilities, as that authority exists under current law. Specifically, this bill:
1) Defines "ancillary hazardous waste" as any hazardous waste generated at the facility, other than metal shredder residue managed pursuant to this bill.
2) Defines "chemically treated metal shredder residue" or "CTMSR" as the waste generated from the processing of shredded metallic materials, which may include, but is not limited to, end-of-life vehicles, appliances, and other metal-containing items, by a metal shredding facility where recoverable ferrous or nonferrous metals have been removed and the remaining metal shredder residue has been treated by a waste stabilization process, as described.
3) Defines "existing metal shredding facility" as a metal shredding facility that is conducting metal shredding and metal processing operations as of the date that the act adding this bill is signed into law by the Governor.
4) Defines "feedstock" as material received by a metal shredding facility before shredding and processing, including, but not limited to, end-of-life vehicles, household appliances, or other forms of light gauge metal suitable for processing in a metal shredder.
5) Defines "light fibrous material" as a fibrous mixture of nonmetallic materials, including, but not limited to, synthetic fabric and carpet fibers, and entrained metallic particles, often representing the lightest fraction of metal shredder aggregate produced from the shredding of end-of-life vehicles and other metallic items, which is susceptible to dispersal into the environment.
6) Defines "metal processing operations" as the stockpiling and handling of metal shredder aggregate; the operations undertaken to separate, sort, and remove ferrous or nonferrous scrap metal from metal shredder aggregate; and the treatment and storage of metal shredder residue. Metal processing operations does not include shredding, crushing, baling, shearing, cutting, or other metal recycling operations unrelated to the handling of metal shredder aggregate.
7) Defines "metal shredder aggregate" as the mixture of shredded metallic and nonmetallic materials that is produced by the shredding of metallic feedstock and that is subsequently processed for the purpose of separating, sorting, and removing ferrous metals, nonferrous metals, or other recyclable commodities from nonrecyclable materials. Metal shredder aggregate does not include metals that have been removed from metal shredder aggregate, or metal shredder residue.
8) Provides that metal shredder aggregate is an in-process material and is not a waste or a hazardous waste.
9) Defines "metal shredder residue" as waste comprising shredded plastics, rubber, glass, foam, fabric, carpet, wood, dirt, or other debris that remains after recoverable ferrous and nonferrous metals or other recyclable commodities have been separated and removed from metal shredder aggregate. Metal shredder residue does not include chemically treated metal shredder residue.
10) Defines "metal shredding facility" as the entire site under the control of the owner or operator of a facility that uses a stationary or mobile shredder, such as a hammer mill or other shredding technique, to process end-of-life vehicles, appliances, or other metallic feedstock materials in order to facilitate the separation, sorting, or removal of recoverable ferrous or nonferrous metals from nonrecyclable materials. "Metal shredding facility" does not include a feeder yard or other scrap metal recycling facility that operates a metal crusher, a metal shear, or a metal baler if that facility does not conduct metal shredding operations.
11) Defines "new metal shredding facility" as a metal shredding facility that had not commenced metal shredding and metal processing operations as of the effective date of this bill.
12) Exempts the following facilities from regulation under the requirements of this bill:
a) Facilities that shred only electronic waste (e-waste);
b) Facilities that shred wood or wood products that may contain ancillary metal components, including, but not limited to, screws, bolts, metal ties, and metal strapping;
c) Facilities that shred only automotive tires;
d) A feeder yard or other scrap metal recycling facility that operates a metal crusher, metal shear, or metal baler if that facility does not conduct metal shredding operations; and,
e) A metal shredding facility that processes exclusively nonferrous metals that do not contain any nonmetallic materials and whose operations do not produce any metal shredder aggregate or result in the generation of metal shredder residue.
13) Provides that metal shredding facilities that are subject to regulation and comply with the requirements of this bill are not hazardous waste facilities. However, further provides that this bill does not alter or override the authority of DTSC or a Unified Program Agency, to regulate ancillary hazardous waste generated at a metal shredding facility.
14) Provides that this bill does not limit the authority of a local air pollution control district or air quality management district, or the authority of a Unified Program Agency, or the authority of a local environmental health department that is not a Unified Program Agency.
15) Authorizes DTSC to adopt regulations as necessary to implement this bill, and thereafter to update and revise the regulations from time to time, consistent with the requirements of this bill.
16) Requires DTSC to adopt regulations relating to the imposition of fees on metal shredding facilities.
17) Prohibits, unless otherwise specified, a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
18) Authorizes on and after the effective date an existing metal shredding facility, operating in compliance with the requirements of this bill, to continue to operate pending final action on a permit application as specified in this bill. Requires, without exception, the facility to have developed and continuously implement a fire prevention, detection, and response plan and comply with the limitations on pile size and duration set forth in this bill. Provides that nothing herein shall prevent DTSC from taking enforcement action before issuance of a final permit.
19) Requires any permit approved by DTSC pursuant to this bill to include a reference to all permits issued to the facility by other environmental regulatory agencies. Requires DTSC to evaluate how to apply, to metal shredding facilities, its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations as described in existing law (Health and Safety Code (HSC) § 25200.21(b-c))
20) Requires DTSC to determine, on the basis of substantial evidence, that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities, before taking final action to issue a permit for a metal shredding facility under this bill.
21) Requires, within 30 days of the effective date of this bill, the owner or operator of an existing metal shredding facility to submit a notice of intent to apply for a permit. Thereafter, requires the owner or operator of an existing metal shredding facility to apply for a permit pursuant to this bill no later than six months following submittal of the notice of intent and to provide all of the following information to DTSC:
a) A description of the metal processing operations conducted at the metal shredding facility, including all equipment used for this purpose;
b) A metal shredding facility inspection plan, including, without limitation, inspection of the area surrounding the hammer mill and all downstream metal processing equipment where light fibrous material is likely to accumulate;
c) A plan for the prevention, detection, and response to fires;
d) A closure plan;
e) A metal shredding facility housekeeping plan that includes, but is not limited to, daily cleanup of light fibrous material that is susceptible to dispersal beyond the hammer mill;
f) An inventory management plan that includes procedures that will be implemented to ensure compliance with the limitations on pile size and duration set forth in this bill;
g) Evidence of financial assurance for closure and third-party liability consistent with the requirements of existing regulations;
h) A plan describing any offsite or out-of-state transportation and processing of metal shredder aggregate and metal shredder residue, including, but not limited to, the estimated amount of material that is transported, the identity and federal Standard Industrial Classification code of the receiving facility, the estimated amounts of metals that are recovered from the material that is transported offsite, the required insurance, and any other information requested by the department to evaluate whether metal recycling operations are being conducted at the receiving facility; and,
i) A compliance plan and schedule if required pursuant to the requirements of this bill.
22) Requires DTSC to review the permit application as expeditiously as possible and take final action to approve, modify, or deny the application within three years after the application has been determined to be complete. Provides that failure of the owner or operator to provide a complete permit application within one year shall be grounds for DTSC to initiate denial of the application, subject to specified conditions.
23) Requires DTSC to impose any additional facility-specific conditions that are necessary to ensure compliance with this bill and for the protection of human health and the environment.
24) Requires DTSC, in considering an application for a metal shredding facility permit submitted pursuant to this bill, and the specific terms and conditions to be included in the permit, to consider the site-specific aspects of the metal shredding facility, including, but not limited to:
a) The nature of the surrounding community and environment;
b) The results of any community-specific assessment;
c) The facility size, location, and configuration;
d) The equipment, enclosures, and infrastructure;
e) The specific metal processing operations conducted at the metal shredding facility, including types of feedstock and annual throughput; and,
f) Other relevant site-specific characteristics.
25) Requires the owner or operator of a new metal shredding facility to submit an application to DTSC for a permit and prohibits the owner or operator from commencing operations at the new metal shredding facility until DTSC has approved a permit.
26) Requires DTSC, in reviewing a facility's application for permit renewal, to consider the compliance history of the metal shredding facility, including the requirements of any permit issued by any other agency.
27) Requires, before the submission of a permit application or application for permit renewal for a metal shredding facility, the applicant to hold at least one public meeting, or other community engagement activity approved by DTSC, to inform the community of metal processing activities and any potential impacts to nearby communities and to solicit questions and input from the public.
28) Authorizes an owner or operator of a metal shredding facility that has submitted a permit application and is unable to comply with all the requirements of this bill as of the effective date to continue to operate pending DTSC's review and approval or denial of the permit application, subject to all of the following requirements:
a) The owner or operator identifies in its application each provision of this bill that the facility is unable to immediately comply with and has developed and implemented a plan and schedule approved by DTSC for achieving compliance with the provisions of this bill;
b) On or before the effective date, the owner or operator has developed and implements a written plan for the prevention, detection, and response to fires that meets the requirements of this bill. Requires that a copy of the fire response plan be submitted to DTSC within seven days of the effective date, and subject to review and approval of DTSC after consultation with the facility and the local fire department of the jurisdiction where the facility is located;
c) On or before the effective date, the owner or operator complies with the limitations on pile size and duration set forth in this bill;
d) The owner or operator initiates, diligently pursues, and implements financial assurance for closure and third-party liability as required pursuant to this bill, including, but not limited to, both of the following:
i) The owner or operator initiates and diligently pursues to completion a preliminary endangerment assessment, as required pursuant to this bill and initiates any required actions identified in the preliminary endangerment assessment; and
ii) The owner or operator, at a minimum, maintains all existing practices and controls that are in effect or otherwise required by DTSC, a Unified Program Agency, or a local environmental health department on or before the effective date, that are designed to prevent the possibility of any unplanned sudden or non-sudden release of any of in-process materials; hazardous waste; metal shredder residue; or, chemically treated metal shredder residue, into air, soil, or surface water that could threaten human health or the environment; and,
e) The owner or operator shall be subject to any interim measures or controls established by DTSC during consideration of the permit application that are necessary for the protection of human health and the environment.
29) Requires the owner or operator of a metal shredding facility to operate the metal shredding facility in accordance with all of the following requirements:
a) The metal shredding facility shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or non-sudden release of in-process materials or components thereof, including metal shredder aggregate and light fibrous material, into air, soil, or surface water that could threaten human health or the environment by implementing all reasonable and feasible operational or engineering methods of control, including, but not limited to, technologies or equipment, taking into consideration the size, configuration, and location of the facility, the characteristics of the materials handled, and other relevant factors;
b) The owner or operator of the metal shredding facility shall develop and follow an inbound source control policy designed to prevent the shredding of any of the following materials or wastes at the facility:
i) Federal Resources Conservation and Recovery Act (RCRA) hazardous waste, and non-RCRA hazardous waste;
ii) Asbestos and asbestos-containing materials, except incidental asbestos-containing material that may be contained inside equipment and is not visible upon inspection;
iii) Radioactive materials;
iv) Petroleum-based wastes, including, but not limited to, used oil, gasoline, and diesel, but not including non-free-flowing residual quantities of such wastes contained in depolluted vehicles or appliances;
v) Polychlorinated biphenyls (PCB) materials and wastes, including, but not limited to, capacitors, electrical transformers, and transformer components;
vi) Fluorescent light ballasts, fluorescent lamps, neon, and high-intensity or mercury vapor lights;
vii) Military ordnance, except ordnance designated specifically as Material Designated as Safe;
viii)Explosives, explosive residues, fireworks, and other incendiary materials;
ix) Regulated electronic waste;
x) Mercury containing devices;
xi) Batteries, including, but not limited to, lead-acid batteries and lithium-ion batteries; and,
xii) Compressed gas cylinders and propane canisters, unless empty and disabled.
30) Requires the owner or operator of the metal shredding facility to develop and implement procedures for any depollution operations that are conducted at the metal shredding facility involving the removal of automotive fuels, lubricating oils, refrigerants, and materials that require special handling, as defined in existing law (Public Resources Code (PRC) § 42167), including procedures for the proper management of those materials or wastes that are removed during depollution operations, pursuant to existing law (HSC § 25212).
31) Authorizes the owner or operator of a metal shredding facility to make specified physical or operational changes to the metal shredding facility without seeking prior approval from DTSC.
32) Requires the owner or operator of a metal shredding facility to manage all metal shredder aggregate, untreated and treated metal shredder residue during metal processing operations as necessary to achieve the following minimum standards:
a) All outdoor equipment used for processing or conveyance of metal shredder aggregate shall be enclosed or covered and designed, operated, and maintained to minimize the possibility of the release of light fibrous material into the environment;
b) All vehicles used for the outdoor transfer of metal shredder aggregate shall be loaded and unloaded in a manner that minimizes the possibility of the release of metal shredder aggregate, including light fibrous material into the environment; and,
c) Metal shredder aggregate shall be stored or accumulated inside a structure that protects the material from exposure to the elements and minimizes the possibility of the release of light fibrous material into the environment. At a minimum, the structure shall meet all of the following requirements:
i) The structure shall be enclosed with a floor, roof, and walls sufficient to protect the metal shredder aggregate from exposure to the elements and to contain the metal shredder aggregate and any process residues that are managed in the structure;
ii) The roof shall completely cover all areas used for storage or accumulation of metal shredder aggregate; and,
iii) The floor shall be constructed of concrete surfacing, steel plate, or other surfacing material approved by the department designed to prevent infiltration and collect and route any water that drains from the metal shredder aggregate to a process water management system.
33) Provides that, if managed in accordance with this bill, including any plans approved by DTSC and any additional conditions imposed by DTSC, the following materials are not waste, and shall not be subject to regulation the HWCL:
a) Scrap metal;
b) Metal shredder aggregate that is managed according to specified requirements;
c) Intermediate metal products that are subject to further processing to improve product quality;
d) Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and,
e) Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
34) Requires metal shredder aggregate, including light fibrous material, which is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, to be subject to regulation as hazardous waste under the HWCL, if it exhibits a characteristic of hazardous waste.
35) Requires untreated metal shredder residue that meets the definition of a non-RCRA hazardous waste to be chemically treated in accordance with the requirements of this bill or managed in accordance with all applicable requirements of the HWCL. Chemically treated metal shredder residue is not hazardous waste if all of the specified conditions are met.
36) Provides that the owner or operator of a metal shredding facility is not required to treat metal shredder residue.
37) Requires, within one year after the effective date of this bill, the owner or operator of a metal shredding facility to conduct a preliminary endangerment assessment, and to submit it to DTSC. Requires the owner or operator of a metal shredding facility to conduct appropriate corrective action as needed to address releases of hazardous materials or wastes that pose a significant threat to human health or the environment.
38) Requires the owner or operator of a metal shredding facility to provide DTSC with immediate notice of a fire or other incident at the metal shredding facility that requires the assistance of a local fire department or other first responder.
39) Requires the owner or operator of a metal shredding facility to establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility.
40) Requires the owner or operator of a metal shredding facility to have a written closure plan, subject to approval by DTSC, which covers how to safely close the facility including a closure cost estimate.
41) Requires the owner or operator to provide a financial assurance mechanism for closure of the metal shredding facility using one or more of the financial mechanisms described in regulations within the authority of the HWCL. Additionally requires the owner or operator to provide a financial assurance mechanism for bodily injury and property damage to third parties caused by sudden accidental occurrences arising from operations of the metal shredding facility.
42) Requires DTSC, via regulations, including emergency regulations, adopted by DTSC, to collect an annual fee on all metal shredding facilities that are subject to the requirements of this bill, to reimburse DTSC's reasonable costs to implement all aspects of this bill, other than costs connected to review of a facility's permit.
43) Requires a person who applies for a metal shredding facility permit under this bill to enter into a written agreement with DTSC, such that the person will reimburse DTSC for the direct costs reasonably incurred by DTSC in processing the application. Requires the facility to reimburse DTSC's costs sufficient to cover DTSC's review of the permit application, the conduct of public meetings and notices associated with the permit process, and preparation of the permit.
44) Provides that the enforcement authority granted to DTSC under the HWCL and its implementing regulations may be used to enforce the provisions of this bill, including, but not limited to, the authority to pursue administrative or judicial enforcement for violations of this bill and any implementing regulations, to suspend the authorization of any metal shredding facility that has been determined based on substantial evidence to pose an imminent and substantial endangerment to human health or the environment, and to deny an application for a permit for any of the reasons set forth in this bill.
45) Authorizes DTSC to order the temporary cessation of shredder operations and may prohibit the receipt of additional shredder feedstock by the facility, under specified conditions.
46) Authorizes DTSC to prohibit the receipt of shredder feedstock at a metal shredding facility on a temporary basis if the owner or operator exceeds the limitations relating to pile size and duration set forth in this bill.
47) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility under this bill. A denial, revocation, or suspension shall be based on at least one of the following:
a) Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment;
b) An owner or operator’s failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time;
c) A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation; or,
d) Any cause specified in HSC § 25186 under the HWCL (which allows for denial, revocation, etc. if a person violates one of the state or federal environmental laws or regulations listed within the HWCL).
48) Requires DTSC, if DTSC takes an action to deny, revoke, or suspend a permit under this bill, to provide notice of the proposed action to the owner or operator of the metal shredding facility by certified mail, with return receipt requested or by personal service.
49) Authorizes an owner or operator who wishes to appeal that action [to deny, revoke or suspend a permit] to appeal by submitting a letter to DTSC, within 10 days of receipt of notice of the action and requesting a hearing.
50) Provides that, except for permit decisions, proceedings to appeal any decision made by DTSC under this bill, shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code. Requires, before initiating an appeal, the owner or operator of a facility to meet and confer with DTSC in a good faith effort to resolve the dispute.
51) Provides that proceedings to appeal DTSC's decision concerning the denial, revocation or suspension of a permit to operate a metal shredding facility pursuant to this bill shall be conducted in accordance with Chapter 5 (commencing with Section 11500) of Part 1 of Division 3 of Title 2 of the Government Code.
52) Provides that nothing in this bill, and no action taken by DTSC pursuant to this bill, shall be construed as a limitation on the right of a city attorney, county counsel, district attorney, or the Attorney General to maintain a civil or criminal prosecution or of any person to maintain any civil action otherwise authorized by law.
53) Exempts from the definition of hazardous waste, under the HWCL:
a) Chemically treated metal shredder residue (if treated according to the provisions of this bill);
b) Scrap metal;
c) Metal shredder aggregate (managed in accordance with the requirements of this bill);
d) Intermediate metal products that are subject to further processing to improve product quality;
e) Finished ferrous and nonferrous metal commodities that are separated or removed from metal shredder aggregate at a metal shredding facility; and,
f) Nonmetallic recyclable items recovered from metal shredder aggregate for which a market exists.
EXISTING LAW:
1) Requires DTSC to enforce the standards within the HWCL and the regulations adopted by DTSC pursuant to the HWCL. (HSC § 25180)
2) Authorizes DTSC to deny, suspend, or revoke any permit, registration, or certificate applied for, or issued pursuant to, the HWCL. Includes within this authority the ability of DTSC to deny, suspend, or revoke any permit, registration, or certificate applied for any violation of various state and federal environmental laws and regulations further specified. (HSC § 25186)
3) Authorizes DTSC to issue permits for the use and operation of one or more hazardous waste management units at a facility that meets the standards adopted pursuant to the HWCL. (HSC § 25200 (a))
4) Requires DTSC to impose conditions on each permit specifying the types of hazardous wastes that may be accepted for transfer, storage, treatment, or disposal. (HSC § 25200 (a))
5) Requires DTSC, on or before January 1, 2018, to adopt regulations establishing or updating criteria used for the issuance of a new or modified permit or renewal of a permit, which may include criteria for the denial or suspension of a permit; how to address cumulative impacts to nearby populations of a facility; and, minimum setback distances from sensitive receptors. (HSC § 25200.21)
6) Creates within DTSC the Board of Environmental Safety (Board), consisting of five voting members; requires the Board to set regulatory fees; hear and decide appeals of hazardous waste facility permit decisions; provide opportunities for public hearings on permitted or remediation sites; review and consider for approval the director of DTSC's annual priorities; conduct an analysis of DTSC's regulatory fee structure; and conduct an analysis of DTSC's programs. (HSC § 25125)
7) Authorizes DTSC, in consultation with the Department of Resources, Recycling and Recovery, the State Water Resources Control Board, and affected local air quality management districts, to adopt regulations establishing management standards for metal shredding facilities for hazardous waste management activities within DTSC's jurisdiction as an alternative to the requirements specified in the HWCL (this authority expired on January 1, 2018). (HSC § 25150.82 (c))
8) Authorizes DTSC to collect an annual fee from all metal shredding facilities that are subject to the requirements of the HWCL or to the alternative management standards adopted pursuant to HSC § 25150.82. Requires DTSC to establish and adopt regulations necessary to administer this fee and to establish a fee schedule that is set at a rate sufficient to reimburse DTSC's costs to implement the HWCL as applicable to metal shredder facilities. Authorizes the fee schedule established by DTSC to be updated periodically as necessary and requires the assessment to be no more than the reasonable and necessary cost of DTSC to implement the HWCL, as applicable to metal shredder facilities. (HSC § 25150.84 (a))
9) Defines "metal shredding facility" as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to facilitate the separation and sorting of ferrous metals, nonferrous metals, and other recyclable materials from nonrecyclable materials that are components of the end-of-life vehicles, appliances, and other forms of scrap metal. "Metal shredding facility" does not include a feeder yard, a metal crusher, or a metal baler, if that facility does not otherwise conduct metal shredding operations. (HSC § 25150.82 (b))
10) Prohibits materials that require special handling (MRSH) that are contained in major appliances from being disposed of at a solid waste facility and requires them to be removed from major appliances in which they are contained prior to the appliance being crushed, baled, shredded, sawed or sheared apart, disposed of, or otherwise processed in a manner that could result in the release or prevent the removal of materials that require special handling. Once removed, these MRSH shall be managed as a hazardous waste and any violations related to the management of MRSH are subject to the violations in the HWCL. (HSC § 25212)
11) Requires materials that require special handling to be removed from major appliances and vehicles in which they are contained prior to crushing for transport or transferring to a baler or shredder for recycling. (PRC § 42175)
12) Defines "vehicle" as any device used for transportation. Vehicle includes bicycles, airplanes, and other transportation devices not used on highways, and automobiles and other vehicles, as defined in Section 670 of the Vehicle Code. (PRC § 42165)
13) Defines "major appliance" as any domestic or commercial device, including, but not limited to, a washing machine, clothes dryer, hot water heater, dehumidifier, conventional oven, microwave oven, stove, refrigerator, freezer, air-conditioner, trash compactor, and residential furnace. (PRC § 42166)
FISCAL EFFECT: Unknown.
COMMENTS:
Need for the bill: According to the author:
"Metal shredding facilities recycle millions of end-of-life vehicles, household appliances, and other metallic items produced, used, and discarded annually in California. Unless recycled, these metal materials would rapidly overwhelm all available landfill capacity, creating a massive accumulation of damaged and abandoned cars, appliances, and other items.
Metal shredding poses environmental concerns to surrounding communities because the shredding process has the potential to release particulate materials and has a risk of causing fire. The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by the California Department of Toxics and Substances Control (DTSC). Without a comprehensive regulatory framework, DTSC on their own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation.
SB 404 will resolve this uncertainty, allow the pending litigation to be dismissed, and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC’s authority. This bill will ensure that California remains a sustainability leader in "reducing, reusing and recycling" by fostering the recycling of scrap metal into new metal products, while at the same time protecting adjoining communities from environmental pollution."
California Hazardous Waste Control Law (HWCL): The HWCL is the state's program that implements and enforces federal hazardous waste law in California and directs DTSC to oversee and implement the state's hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management of hazardous waste, including hazardous waste generation, management, transportation, and ultimately disposal into a state or federally authorized facility.
DTSC's hazardous waste management permitting program: DTSC is responsible for administering the hazardous waste facility permitting program established under the HWCL and the federal RCRA. The core activities of the permitting program include: review of RCRA and non-RCRA hazardous waste permit applications to ensure safe design and operation; issuance and denial of operating permits; issuance of post-closure permits; approval and denial of permit modifications; issuance and denial of emergency permits; review and approval of closure plans; oversight of approved closure plans; and, ensuring a public process on the permitting of hazardous waste facilities.
DTSC's hazardous waste management enforcement program: DTSC's inspection and enforcement responsibilities include its delegated authority under RCRA, California's HWCL, and state laws pertaining to toxics in packaging, toxic substances in consumer products, and disposal of universal wastes, such as electronic waste. Core activities of DTSC's hazardous waste management program include routine and targeted compliance inspections. Routine compliance inspections involve review of submitted data and reports, as well as physical observation, testing, and evaluation of regulated facilities. Targeted compliance inspections involve review of specific units or processes in response to focused concerns or to inform permitting decisions, as well as analysis of current and historical compliance.
Metal shredder facilities: California law defines a "metal shredding facility" as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to facilitate the separation and sorting of ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials. A "metal shredding facility" does not include a feeder yard, a metal crusher, or a metal baler, if that facility does not otherwise conduct metal shredding operations. As such, most scrap metal recycling facilities would not be subject to any proposed regulations meant to manage the waste generated from metal shredding facilities.
Metal shredder waste: The shredding of scrap metal (e.g., end-of-life vehicles) results in a mixture of recyclable materials (e.g., ferrous metals and nonferrous metals) and non-recyclable material (i.e., metal shredder waste). Aggregate is generated after the initial separation of ferrous metals and consists of nonferrous metals that can be further recovered and metal shredder waste. Metal shredder waste consists mainly of glass, fiber, rubber, automobile fluids, dirt, and plastics in automobiles and household appliances that remain after the recyclable metals have been removed. Because scrap metal contains regulated hazardous constituents, it can contaminate and ultimately cause metal shredder waste to exhibit a characteristic of hazardous waste for toxicity. In a 2002 draft report on auto shredder waste, DTSC showed that metal shredder waste often exceeded the soluble threshold limit concentrations (STLCs) for lead, cadmium, and zinc.
Non-hazardous waste classification granted to metal shredding facilities: Based on the hazardous characteristics of metal shredder waste, in many instances, metal shredding facilities are hazardous waste generators and are thus subject to hazardous waste requirements, including permitting, transportation, and disposal. In the late 1980s, in an effort to relieve metal shredding facilities of these requirements, the Department of Health Services (DHS) (the predecessor of DTSC) determined that the metal treatment fixation technologies were capable of lowering the soluble concentrations of metal shredder waste such that the treated metal shredder waste was rendered insignificant as a hazard to human health and safety, livestock, and wildlife. Seven metal shredding facilities applied for and were granted nonhazardous waste classification letters by DHS, and later DTSC, if they used the metal treatment fixation technologies. The authority to issue these classifications is found in subdivision (f) of Section 66260.200 of Title 22 of the California Code of Regulations, and these determinations are now known as "f letters." These classifications ultimately allowed treated metal shredder waste to be handled, transported, and disposed of as non-hazardous waste in class III landfills (i.e., solid (nonhazardous) waste landfills).
Legislation to address impacts of metal shredding facilities: In 2014, Senator Jerry Hill introduced SB 1249 (Chapter 756), based in part on concerns about metal shredder safety due to recent fires at metal shredding facilities in his district, but also in response to the historic concerns about metal shredding facilities and their potential impact on the environment. The intent of the bill was that the conditional nonhazardous waste classifications, as documented through the historical "f letters," be revoked and that metal shredding facilities be thoroughly evaluated and regulated to ensure adequate protection of human health and the environment. SB 1249 was signed by the Governor and authorized DTSC to develop alternative management standards (different from a hazardous waste facility permit) if, after a comprehensive evaluation of metal shredding facilities, DTSC determined that alternative management standards were warranted.
DTSC's implementation of SB 1249: DTSC's implementation of SB 1249 included: conducting a comprehensive evaluation of metal shredding facilities and metal shredder waste; determining if alternative management standards specific to metal shredding facilities could be developed to ensure that the management, treatment, and disposal practices related to metal shredder waste are protective of human health and the environment; preparing an analysis of activities to which the alternative standards will apply, made available to the public before any regulations were adopted; and, adopting emergency regulations establishing a fee schedule to reimburse DTSC's costs for the evaluation, analysis, and regulatory development for metal shredding facilities.
As part of this implementation, in January 2015, DTSC developed a three-year work plan to implement SB 1249. The work plan includes development of a treatability study on metal shredder wastes to demonstrate the highest level of treatment that can be achieved with current technology, and an assessment of the potential for treated or untreated metal shredder waste to migrate off-site and impact residents or business occupants in the areas surrounding metal shredding facilities and landfills that accept metal shredder waste.
As part of the work plan, DTSC approved air monitoring summary reports for metal shredding facilities located in Bakersfield, Redwood City, and Terminal Island. Air sampling was conducted at the facilities during October 2016 to assess the potential for offsite emissions associated with the metal shredding operations.
DTSC's evaluation of metal shredding facilities: As part of SB 1249, DTSC conducted a multi-year evaluation of metal shredding facilities, issuing a draft report in 2018 and then issuing a final report in August of 2021 titled, "Evaluation and Analysis of Metal Shredding Facilities and Metal Shredder Wastes." According the final report:
"The Department of Toxic Substances Control (DTSC) is pleased to present this Evaluation and Analysis of Metal Shredding Facilities and Metal Shredder Wastes (Final Report). This Final Report incorporates feedback received after initial posting of the Draft Report in 2018, summarizes recent enforcement actions taken since 2018, provides an analysis of the DTSC-directed treatability study, incorporates information learned by DTSC during the course of its community workshops and stakeholder consultation group meetings, and revises terminology where appropriate. DTSC reviewed hazardous waste management activities, current regulatory environmental oversight, and the history of releases, contamination, and enforcement actions at metal shredding facilities in California.
Additionally, DTSC coordinated with metal shredding facilities on a treatability study to identify the highest level of treatment that could be achieved to stabilize metals of concern on metal shredder waste with current technology. DTSC also reviewed the current disposal practices of chemically treated metal shredder waste at municipal solid waste landfills to identify the potential for migration of contaminants to groundwater, surface water, and the air. The study team found numerous examples of accidents, improper storage of hazardous wastes, soil contamination, and releases of hazardous wastes that impacted the environment and surrounding communities at metal shredding facilities.
DTSC and other agencies have taken several enforcement actions against metal shredding facilities in response to these types of incidents. DTSC’s efforts have allowed for it to gain a more thorough understanding of metal shredder operations, as well as of the ambiguities within the existing regulatory framework under which metal recyclers, including shredding facilities, have historically operated. Based on this evaluation, DTSC has determined that the point of generation of hazardous waste is at the shredder itself, meaning that various downstream activities performed at the facilities would be subject to the Hazardous Waste Control Law. Under the Hazardous Waste Control Law, entities who conduct hazardous waste treatment, storage, or disposal are required to apply for and receive a form of authorization from DTSC in order to operate. Based on the results of its evaluation and DTSC's updated understanding of these activities, metal shredding facilities would require a form of authorization from DTSC to continue to operate in the same manner.
DTSC’s analysis demonstrates that the disposal of chemically treated metal shredder residue as nonhazardous waste in municipal solid waste landfills, including its use as alternative daily cover, has not resulted in harm to human health or safety or to the environment, based on the limited data available to DTSC. Additionally, the analysis demonstrates that chemically treated metal shredder residue has not contributed to the solubilization and migration of heavy metals from solid waste landfills via leaching into soil or groundwater, surface water contamination, or windborne dispersion. Thus, while various protections and requirements related to the management of chemically treated metal shredder residue (CTMSR) during its transportation to landfills may need to be developed to ensure the safety of human health and the environment, DTSC has concluded that it is not necessary that metal shredder residue that has been appropriately chemically treated, managed, and transported, to be disposed of as a hazardous waste to prevent or mitigate potential hazards to human health or safety or to the environment."
Implementation of SB 673 (Lara, Chapter 611, Statutes of 2015): SB 673 was signed into law in 2015, creating an opportunity for DTSC to improve the permit process for hazardous waste facilities. Implementation of SB 673 provided DTSC with an opportunity to address long standing environmental justice concerns stemming from the location, operation, and expansion of hazardous waste facilities. The provisions of SB 673 provided for stronger permit criteria to further protect communities and consider "the vulnerability of, and existing health risks, to nearby populations" when issuing new or modified permits and permit renewals. DTSC's efforts to implement SB 673 included dividing the regulations into two tracts. One tract has been implemented and it deals with incorporating past violations into permitting decisions. This is also known as the violation scoring procedure. The remaining piece of SB 673 has yet to be implemented and requires DTSC to evaluate community vulnerability, health risks, and setback distances into its permitting processes.
This bill: SB 404 requires DTSC to evaluate how to incorporate the part of SB 673 dealing with community vulnerability and minimum setbacks distances into its permitting of metal shredding facilities. However, SB 404 does not include, and some stakeholders have requested that it include, DTSC's violation scoring procedure into its permitting of metal shredding facilities.
Recent legislation dealing with metal shredding facilities: Last year the legislature enacted and the Governor signed AB 2851 (Bonta, Chapter 743, Statutes of 2024), which requires DTSC, in consultation with local air pollution control districts and air quality management districts, to develop and implement facility-wide fence-line air quality monitoring at metal shredding facilities. It is important to note that the funding for AB 2851 comes from fees from metal shredders detailed under the HWCL. While this bill strikes that section dealing with metal shredder fees in the HWCL, it reenacts the same fee authority in a new section in SB 404. Therefore, there is no impact to the funding of AB 2851 from this bill.
Key details contained in SB 404: This bill creates an entirely new permitting structure for metal shredding facilities. While there are aspects of this bill that are similar to or consistent with the requirements for hazardous waste facilities under the HWCL, the permits under this bill are completely new in the state. Below are some key aspects contained within SB 404:
1) Clarifies that this bill does not limit the authority of a local air pollution control district or air quality management district, or the authority of a Unified Program Agency, or the authority of a local environmental health department that is not a Unified Program Agency.
2) Prohibits, unless otherwise specified, a metal shredding facility from operating in California, unless it has a permit issued by DTSC.
3) Requires DTSC to evaluate how to apply, to metal shredding facilities, its policies relating to environmental justice and the protection of vulnerable communities or sensitive receptors and other sensitive locations, as described in existing law (HSC § 25200.21(b-c))
4) Requires DTSC to determine, on the basis of substantial evidence, that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities, before approving or denying a permit under this bill.
5) Requires DTSC to impose any additional facility-specific conditions that are necessary to ensure compliance with this bill and for the protection of human health and the environment.
6) Requires the metal shredding facility, before they submit a permit application to DTSC, to hold at least one public meeting, approved by DTSC, to inform the community about the metal shredding facility and any potential impacts to nearby communities.
7) Authorizes a metal shredding facility to make specified physical or operational changes to the metal shredding facility without seeking prior approval from DTSC.
8) Clarifies that metal shredder aggregate, including light fibrous material, that is either released into the environment during transportation, or released beyond the property boundaries of the metal shredding facility, shall be subject to regulation as hazardous waste under the HWCL.
9) Requires the metal shredding facility, within one year of the effective date of this bill, to conduct an on-site investigation to determine if there have been any releases to the environment. Requires the facility to conduct cleanup of any releases that pose a significant threat to human health or the environment. Clarifies that DTSC still has its authority under the HWCL to order any investigation and cleanup as necessary.
10) Requires the metal shredding facility to establish an effective means of providing public notice to members of the surrounding community upon the occurrence of a fire or other incident that poses a threat to human health or the environment outside of the facility.
11) Requires the owner or operator to provide a financial assurance mechanism for closure of the metal shredding facility and for bodily injury and property damage. (note: financial assurance is a mechanism under the HWCL that allows DTSC to access funding, provided by the facility, to safely close the facility or perform other cleanup as necessary, in the event the facility was no longer operating or bankrupt)
12) Clarifies that DTSC can use any authority it has under the HWCL to enforce the provisions of this bill.
13) Authorizes DTSC to order the temporary shutdown of shredding operations or prohibit the receipt of shredder feedstock under certain circumstances.
14) Authorizes DTSC to deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility based on at least one of the following:
a) Noncompliance with a condition of the applicable permit that results in a significant threat to human health or the environment;
b) An owner or operator’s failure in the application or during the approval process to disclose fully all relevant facts or a misrepresentation of any relevant fact at any time;
c) A determination, supported by substantial evidence, that the permitted activity poses a danger to human health or the environment that can only be addressed by permit denial, modification, suspension, or revocation; or,
d) Any cause specified in HSC § 25186 under the HWCL. (in short: this means a permit could be denied, suspended, etc. if the facility violates any one of the state and federal environmental laws and regulations listed in this referenced code section).
Stakeholder engagement and recent amendments to this bill: Over the course of the legislative process, this bill has undergone significant revisions pursuant to stakeholder conversations and engagement among the Author, sponsors, and opposition. Amendments taken have intended to address the following issues: preservation of authority of local agencies (CUPAs, local health officers, and public attorneys); enhancing permit requirements to reduce impacts to communities; improve public participation in the permitting of metal shredding facilities; issues specific to smaller metal shredders; improvements to the prevention of fires at metal shredding facilities; more specific enforcement options; clarifying that the fees paid by metal shredders under this bill will also be available to implement AB 2851; and provisions to deal with the prevention of off-site releases.
However, even though the bill has been substantially amended as mentioned above, stakeholders continue to raise the following issues (note: this is notan exhaustive list): whether or not metal shredding facilities should be regulated as hazardous waste facilities; issues specific to small metal shredders; the definition of "ancillary hazardous waste," a term used in the bill; authority of local agencies; what is and is not regulated under the bill; issues dealing with enforcement of the provisions of this bill (and how they relate to enforcement under existing law); the allowance in the bill for metal shredding facilities to make changes to their operations without seeking approval from DTSC; how to address a facility's past violations in the permit authorized with this bill; and the ability for the public to appeal a metal shredding facility permit.
This bill: SB 404 creates a regulatory structure in state law for metal shredding facilities. There are currently nine metal shredding facilities in the state, some operating under regulatory authorization from the 1980s and 1990s. Some facilities began the permitting process for a full hazardous waste facility permit and others may have less certain authorization. These facilities are an important piece of the metal recycling infrastructure in California. However, having one clear regulatory structure for all metal shredding facilities in the state makes sense. Having clear rules will be helpful for state and local regulators and facilities, and will help set the regulatory standard for future metal recycling facilities in the state.
Potential Amendments: The Committee and Author may wish to consider amending the bill per the following:
1) Require DTSC to conduct at least one site visit to a metal shredding facility after receiving the application for a permit for a metal shredding facility;
2) Require DTSC to post on its internet website information about each metal shredding facility including a description of the facility, permit status, public notices/meetings; permit milestones; and the facilities enforcement history;
3) Authorize any person to appeal a metal shredder facility permit;
4) Define what a feeder yard is;
5) Clarify the authority of public attorneys to bring an action under this bill; and
6) Other technical and clarifying changes.
Arguments in support: According to the California Metal Recyclers Coalition:
"Metal shredding facilities provide an essential public service to many sectors of the economy, including state and municipal governments, California businesses and residents by providing a safe, reliable and environmentally responsible means of recycling the vast quantities of recyclable metal-containing materials that are generated in the state every day. These facilities successfully recycle millions of end-of-life vehicles, trucks, busses, household appliances, steel beams, rebar and other metallic construction materials, and thousands of other items ranging in size from a backyard barbeque to sections of the old San Francisco-Oakland Bay Bridge. More than ever, these facilities provide the only feasible and cost-effective means of dealing with the huge number of burned vehicles, household appliances and other metal items that are damaged or destroyed by the wildfires which are sweeping though our communities with distressing frequency.
These recycling operations produce thousands of tons of recycled ferrous and non-ferrous metal commodities that are sold to steel plants, smelters and foundries around the world to be used in the manufacturing of new products.
SB 404 solves a problem that has threatened the economic viability of metal shredding facilities for almost a decade—the lack of clarity around how these critical facilities should be regulated. Because scrap metal is exempt from regulation under the Hazardous Waste Control Law, facilities that recycle these valuable materials fall outside the permitting program administered by the Department of Toxic Substances Control (DTSC). This bill would establish a new regulatory program tailored specifically to this industry that would be administered by DTSC under new authority. Significant improvement has been achieved over the past few years, and the regulatory framework established by SB 404 will ensure that these important facilities continue to operate safely and in an environmentally protective manner. The operating and performance standards have been discussed at length with DTSC and are supported by members of the industry. California’s metal shredders and DTSC agree that a comprehensive regulatory program that recognizes the unique nature and importance of scrap metal is in the best interest of the industry and the state."
Arguments in opposition: According to a coalition of environmental justice organizations:
"The undersigned organizations respectfully oppose Senate Bill 404 (Caballero), which deprives communities near certain hazardous waste facilities of necessary human health and environmental protections required by California’s hazardous waste laws. The bill’s effort to create a separate, less comprehensive regulatory regime for metal shredding facilities does not solve, and may even exacerbate, these threats.
Metal shredder aggregate is hazardous waste and must be regulated as such under the hazardous waste law. Contrary to the bill’s overly complicated approach, California should regulate metal shredding facilities under the existing hazardous waste requirements, including by promptly requiring the facilities to obtain hazardous waste permits with conditions necessary to protect human health and the environment. The Department of Toxic Substances Control ("DTSC") should then be directed to develop additional requirements, within the existing hazardous waste legal framework, tailored to address the ongoing problems we’ve seen at metal shredding facilities—including fires and dispersal of heavy metals into surrounding communities.
While this particular bill addresses metal shredding facilities, the approach it takes is part of a problematic trend that deprives overburdened communities of protection from the dangers of hazardous waste mismanagement. California should prioritize moving forward with available authority and under the existing framework to safeguard its communities and environment from toxic pollution. While we agree with the need to address the threats posed by metal shredding facilities to communities, this bill as written moves in the opposite direction."
According to Universal Service Recycling, Inc. (Universal), Pacific Auto Recycling Center (PARC), and Kramar’s Iron & Metal Co. (Kramar):
"[Universal, PARC, and Kramar], three small businesses that have recycled metals in California for decades, are regrettably opposed to SB 404 unless it is amended to eliminate the duplicative, overly burdensome, and costly requirements it would impose on our businesses.
Metal shredding and recycling is a critical circular economy and environmental protection measure in California. Small metal recyclers assist in the statewide recovery of valuable secondary metals, separating and bundling them into compact and transportable bales that can be sold as raw materials for manufacturing new metal products, such as rebar used for building and transportation projects. Small metal recyclers also play an important role in the cleanup process that follows natural disasters, such as the catastrophic wildfires that impacted Los Angeles communities earlier this year, and also support local economies in disadvantaged communities for the many jobbers who collect and sell scrap metal to our facilities.
One of our primary concerns is that, despite properly defining “metal shredder aggregate” as a material in process and not a waste, the bill then goes on to create a surrogate hazardous waste permitting program for metal shredder aggregate. This approach greatly expands the Department of Toxic Substances Control’s (DTSC) jurisdiction beyond management of hazardous waste into management of an entire production process, and an entire business operation. It would authorize DTSC to regulate valuable secondary materials that are still in process in the same way they regulate hazardous waste. We have significant concerns about expanding DTSC’s jurisdiction into a production process, and in particular, the authority given to DTSC in Article 8 to entirely shut down a business without due process.
We urge the Committee to request that the author reconsider our proposed amendments because they focus the bill on activities within DTSC’s jurisdiction - on the management of hazardous waste and providing regulatory certainty for the onsite treatment of hazardous waste that occurs at some large metal shredding facilities."
Related legislation:
1) SB 1234 (Allen, 2024). Would have established permitting requirements for new and existing metal shredding facilities. Would have required an owner or operator of an existing metal shredding facility, within 120 days after the effective date of this bill, to submit to the DTSC, for review and approval, specified information that is required for a metal shredding facility permit. This bill was held on the suspense file in the Assembly Appropriations Committee.
2) AB 2851 (Bonta, Chapter 743, Statutes of 2024). Requires DTSC, in consultation with local air pollution control districts and air quality management districts, to develop and implement facility-wide fence-line air quality monitoring at metal shredding facilities.
2) SB 158 (Committee on Budget and Fiscal Review, Chapter 73, Statutes of 2021). Enacted several policy reforms to the programs overseen by DTSC, stabilized DTSC's funding, and created the Board.
3) SB 673 (Lara, Chapter 611, Statutes of 2015). Revised DTSC's permitting process and public participation requirements for hazardous waste facilities.
4) SB 1249 (Hill, Chapter 756, Statutes of 2014). Authorizes DTSC to adopt regulations establishing alternative management standards for hazardous waste management activities at metal shredding facilities until January 1, 2018.
REGISTERED SUPPORT / OPPOSITION:
Support
Active Recycling Co.
Advantage Scrap Metal
American Dismantling Auto Parts
American HVAC Manufacturing
Arcata Scrap & Salvage
Beacon House Association of San Pedro
BobCo Metals
Boys & Girls Clubs of the Los Angeles Harbor
California Council for Environmental & Economic Balance
California Council of the Plumbing, Heating and Piping Industry
California Hispanic Chambers of Commerce
California Metal Recyclers Coalition
California Police Chiefs Association
California Professional Firefighters
California State Association of Electrical Workers
California State Council of Laborers
California State Pipe Trades Council
Caravan Manufacturing
Carson Chamber of Commerce
Central City Association of Los Angeles
City of Los Angeles Councilmember Tim McOsker
Coalition of California Utility Employees
CR&R
Dominguez & Sons Trucking
Ecology Recycling Services
Eel River Transportation and Salvage
Express Auto Dismantlers
Garden Grove Chamber of Commerce
Grand Vision Foundation
International Longshore & Warehouse Union Local 13
International Longshore & Warehouse Union Local 63
International Longshore & Warehouse Union Local 94
JM Auto Dismantlers
Latino Caucus of California Counties
Law Offices of Steven A. Fabbro
Legacy Hauling & Dismantlers
Office of the District Attorney of San Joaquin County
Pacific Steel Group
Peace Officers Research Association of California
Penkor General Contractors
Port of Los Angeles
Pro SE Services
R&B Equipment
Recology Waste Zero
Recycled Materials Association - West Coast Chapter
Redondo Beach Chamber of Commerce
Republic Services
Resource Recovery Coalition of California
San Joaquin County Sheriff - Public Administrator Patrick Withrow
San Joaquin Partnership
South Bay Association of Chambers of Commerce
South Bay Fabrication
SR Metals
Standard Iron & Metals Co.
State of California Auto Dismantlers Association
Strength Based Community Change
Superior Storage Tanks
Supervisor Janice Hahn
The Rincon San Luiseno Band of Indians
Waste Management
Western States Council Sheet Metal, Air, Rail and Transportation
Westside Recycling
Westside Self Service Auto Dismantlers
Wilmington Chamber of Commerce
Opposition
Action Now
Alameda County Office of Education
Asian Industry B2B
California African American Chamber of Commerce
California Association of Environmental Health Administrators
California Black Chamber of Commerce
California Clothing Recyclers
California Communities Against Toxics
California Safe Schools
California Small Business Association
Camarillo Recycling
Cargill
Clean Air Coalition of North Whittier and Avocado Heights
Clean Harbors Environmental Services
County of Alameda
Comite Civico Del Valle
Comite Pro Uno
Del Amo Action Committee
EarthJustice
East Yard Communities for Environmental Justice
G & O Truck Parts
GreenAction for Health and Environmental Justice
Greater Stockton Chamber of Commerce
Kramar's Iron and Metal Co
Lincoln Heights Community Coalition
Los Angeles Unified School District
National Federation of Independent Business
Natural Resources Defense Council
Pacific Auto Recycling Center
PCEJ Action
Philippine Action Group for the Environment
San Francisco Baykeeper
United Chambers of Commerce of the San Fernando Valley
Universal Service Recycling
Valley Industry and Commerce Association
West Oakland Environmental Indicators Project
700 Individuals
Analysis Prepared by: Josh Tooker / E.S. & T.M. / (916) 319-3965
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | SB 404 |
THIRD READING
Bill No: SB 404
Author: Caballero (D), et al.
Amended: 5/23/25
Vote: 21
SENATE ENVIRONMENTAL QUALITY COMMITTEE: 7-0, 4/2/25
AYES: Blakespear, Dahle, Gonzalez, Hurtado, Menjivar, Padilla, Pérez
NO VOTE RECORDED: Valladares
SENATE APPROPRIATIONS COMMITTEE: 6-0, 5/23/25
AYES: Caballero, Seyarto, Cabaldon, Grayson, Richardson, Wahab
NO VOTE RECORDED: Dahle
SUBJECT: Hazardous materials: metal shredding facilities
SOURCE: Author
DIGEST:
This bill establishes a new regulatory structure for metal shredding facilities.
ANALYSIS:
Existing law:
- Defines a “metal shredding facility” as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to help separate and sort ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials. (Health & Safety Code (HSC) §25150.82).
- Allows the Department of Toxics Substance Control (DTSC) in consultation with the Department of Resources Recycling and Recovery (CalRecycle), the State Water Resources Control Board (SWRCB), and local air districts to adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL). (HSC §25150.82).
- Precludes DTSC from adopting management standards that are less stringent than standards set by federal law. (HSC §25150.82).
- Allows waste from a metal shredder (known as metal shredder residue or MSR) to be classified and managed as nonhazardous waste, provided certain standards are met. Such nonhazardous waste can be used as alternative daily cover or for beneficial reuse, or it may be disposed of if it complies with regulations in the Water Code. (HSC §25150.82).
- Allows DTSC to assess a fee on metal shredding facilities to cover the cost of the program. (HSC §25150.84).
- Deems that treated MSR managed under the standards set in law is deemed to be solid waste when it is accepted by a solid waste landfill or other authorized location for disposal or for use as alternative daily cover or other beneficial use. (HSC §25150.86).
This bill:
- Repeals existing law.
- Makes a number of legislative findings and declarations.
- Defines a number of terms and expands the definition of “metal shredding facility.”
- States metal shredding facilities that are subject to and comply with this bill cannot be defined as hazardous waste facilities.
- Specifies certain facilities regulated under specific other statutes are not covered by this bill.
- Repeals a 1988 policy adopted by DTSC titled “Auto Shredder Waste Policy and Procedures” and repeals any nonhazardous waste determination previously issued to any metal shredding facility under regulations adopted by DTSC.
- States this bill will not limit the authority of air districts or certified uniformed program agencies (CUPAs).
- Requires all metal shredding facilities to receive a permit from DTSC to continue operating in the state and sets up timelines to apply for a permit, along with detailed requirements for what each permit application should contain. DTSC also must determine on the basis of substantial evidence that operation of the facility does not pose a significant threat to public health or the environment and will not cause disproportionate and potentially discriminatory impacts on local communities before issuing a permit.
- Requires each permit to be valid for 10 years, unless DTSC adopts a shorter time period for a given facility, and requires facilities to apply for a permit renewal two years before their permit expires.
- Requires permit applicants to hold public meetings and report on those meetings to DTSC, and requires DTSC to, once a facility submits a permit application, hold progress meetings at least once a year to inform the community of the status of the permitting process.
- Allows a metal shredding facility that has submitted a permit application but is not currently in full compliance with the requirements established by this bill to continue operating under certain conditions pending DTSC’s decision on the permit application. However, the applicant must develop and implement a DTSC-approved plan for achieving compliance with this bill in order to continue operating before a permit can be issued.
- Requires permit holders and applicants to develop a number of different policies – including fire and stormwater management plans – adhere to a number of different standards, and maintain a number of specific documents in order to ensure the safety of the operation.
- Allows a facility owner to make certain changes to the facility without getting pre-approval from DTSC, provided the owner notifies DTSC 30 days before or after making the changes. DTSC must post the notice on its Internet website and consider any information from the public in evaluating the potential impact of the proposed modification. This authority does not allow a facility to increase production (also known as “throughput”) beyond the limits authorized or approved by an air quality management district or an air pollution control district. The owner must provide an annual report to DTSC summarizing any changes that are made.
- Allows metal shredder aggregate to be stockpiled outside an enclosure for limited periods of time if certain standards are met and approved by DTSC.
- Sets standards for tracking and transporting metal shredder aggregate.
- States chemically treated MSR is not hazardous waste if certain standards are met.
- Sets standards for transporting and disposing of chemically-treated MSR.
- Exempts a metal shredding facility from the requirement to treat MSR if the facility can demonstrate to DTSC each year the waste generated at the facility does not exhibit any state or federal characteristic of hazardous waste.
- Requires, within one year after this bill takes effect, the owner or operator of a metal shredding facility to conduct a preliminary endangerment assessment and submit it to DTSC.
- Requires the owner or operator of a metal shredding facility to have a written closure plan – approved by DTSC – that addresses a number of specific items.
- Requires DTSC to collect an annual fee on all metal shredding facilities subject to this law.
- Requires the State Controller to establish a new Metal Shredders Facility Account. Fees collected pursuant to this bill must be deposited into the account and be available for expenditure by the department, upon appropriation by the Legislature, solely to implement and administer this chapter.
- Grants DTSC the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
- States DTSC may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility based on a number of detailed circumstances.
Background
California Hazardous Waste Control Law (HWCL). The HWCL is the state's program that implements and enforces federal hazardous waste laws in California and directs DTSC to oversee and implement the state’s hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management lifecycle of hazardous waste, from generation, to management, transportation, and ultimately disposal into a state or federal authorized facility.
What Do Metal Shredders Do & Produce? DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials.
When items are shredded, what is produced is a mix of:
- Ferrous metals that can be recycled;
- Non-ferrous metals that can be recycled;
- Potentially recyclable non-metallic commodities (e.g., plastic); and
- MSR, which is waste that cannot be recycled, though under certain circumstances, it can be put to use as daily cover in solid waste landfills.
How Many Metal Shredders Are There In California? There are 8 metal shredding companies in California operating at 10 locations in the state (one company – SA Recycling – has three locations).
The Late 1980s to Today – A Brief History of Metal Shredding Regulation. Based on the hazardous characteristics of MSR, metal shredding facilities do generate hazardous waste and – prior to the late 1980s – were subject to hazardous waste requirements, including permitting, transportation and disposal.
However, in the late 1980s, in an effort to relax the requirements on metal shredding facilities, the Department of Health Services (DHS) – the predecessor of DTSC – determined treating MSR using chemical stabilization techniques could effectively eliminate the harm posed by MSR. As a result, this waste was determined – when properly treated – to no longer pose a significant hazard to human health and safety, livestock, and wildlife.
Following this determination, seven metal shredding facilities applied for and were granted nonhazardous waste classification letters by DHS, and later DTSC, as long as they used the metal treatment fixation technologies approved by the state. Known as “f letters,” these classifications ultimately allowed treated MSR to be handled, transported, and disposed of as non-hazardous waste in class III landfills (i.e., solid (non-hazardous) waste landfills).
SB 1249 (Hill, Chapter 756, Statutues of 2014). Following concerns about metal shredder safety, SB 1249 was enacted into law. The bill gave DTSC the authority to develop alternative management standards (different from a hazardous waste facility permit) if, after evaluating metal shredding facilities, DTSC determined alternative management standards would still protect the public and the environment.
SB 1249 gave DTSC a timeframe to develop and adopt alternative management standards that may have led to the elimination of the “f letter” process, but DTSC never adopted any standards and the authority to do so sunset under the terms of SB 1249.
Cue The Lawyers – Part One. More than a decade before the enactment of SB 1249, DTSC issued “Official Policy/Procedures #88-6 Auto Shredder Waste Policy and Procedures” – better known as OPP #88-6 – in November 1988. The policy classified metal shredder aggregate as in-process material, not a waste that needed to be regulated under the state’s HWCL.
More than 30 years after it was established – and 7 years after the passage of SB 1249 – OPP #88-6 was unilaterally administratively rescinded by DTSC in October 2021. DTSC stated the policy was inexact, self-contradictory and in conflict with federal and state law.
One month later, in November 2021, Pacific Auto Recycling Center (PARC) filed a complaint against DTSC asking for OPP #88-6 to be re-instated. PARC argued the DTSC policy was actually a regulation under the state’s Administrative Procedure Act (APA) and as such, DTSC couldn’t simply erase OPP #88-6 without going through the APA’s regulatory process.
In June 2023, the trial court agreed with PARC, ordered DTSC to re-instate OPP #88-6, and stated DTSC needed to go through the APA if it wished to rescind OPP #88-6.
Cue The Lawyers – Part 2. In November 2021, the Institute of Scrap Recycling Industries (ISRI) and several individual companies filed suit against DTSC following its adoption of emergency regulations to remove metal shredder aggregate – the ferrous and non-ferrous metals that are recycled – from the definition of scrap metal, which effectively subjected the material to the state’s HWCL.
In March 2022, the court granted ISRI’s request to prevent the regulation from taking effect but did not rule on the underlying merits of the case and after the injunction was granted, DTSC allowed the emergency regulation to expire. The remaining claims on the merits have been consolidated with a different 2019 case pending before the court and is expected to go to trial in late 2026.
Comments
- Purpose of Bill. According to the author, “Metal shredding poses environmental concerns to surrounding communities because the shredding process has the potential to release particulate materials and has a risk of causing fire. The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by DTSC. Without a comprehensive regulatory framework, DTSC on its own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation.
“SB 404 will settle this ambiguity resolve this uncertainty, end the litigation and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC’s authority. This bill will ensure that California remains a sustainability leader in “reducing, reusing and recycling” by fostering the recycling of scrap metal into new metal products, while at the same time protecting adjoining communities from environmental pollution.”
- I Fought The Law. If passed by the Legislature and signed into law, SB 404 would effectively end the litigation referenced in the “Background” section of this analysis, as well as other related lawsuits. This bill repeals OPP #88-6 and because SB 404 defines metal shredder aggregate as scrap metal and not hazardous waste, this bill also nullifies DTSC’s since-expired emergency regulation that sought to remove metal shredder aggregate from the definition of scrap metal.
- Making Shredded MSR Non-Hazardous. As noted in the “Background” section, DHS – DTSC’s predecessor – determined in the 1980s that then-current metal treatment fixation technologies could lower the soluble concentrations of metals in MSR, making this treated waste “insignificant” as a hazard to human health and safety, livestock, and wildlife. Following that determination, a number of metal shredding facilities applied for and received nonhazardous waste determinations – known as “f letters” – from DHS, and later DTSC. As such, their treated MSR is regulated as nonhazardous waste provided they use the approved metal fixation treatment formulas and technologies to deal with their MSR.
This bill eliminates the “f-letter” process and allows chemically treated MSR to be used beneficially as alternative daily cover or otherwise disposed of in authorized solid waste landfills provided they adhere to or exceed the MSR treatment fixation technology standards set in this bill. Those that cannot meet the standards may alternatively handle MSR as hazardous waste.
- Metal Shredder Aggregate, MSR, & DTSC Permitting. While this is a bit of an oversimplification, it may be helpful to think of metal shredding facilities as producing two main end products – metal shredder aggregate and MSR.
The metal shredder aggregate consists of the ferrous and nonferrous materials that are recycled and sold, while the MSR is just that – residue and waste that must be properly disposed of in accordance with standards set forth by this bill.
Under current law, DTSC, CalRecycle, the SWRCB, local air districts, and CUPAs can all adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL).
Some opponents to this bill argue this bill is unnecessary and/or duplicative of current law in part because:
- Having DTSC regulate the metal shredder aggregate is somewhat nonsensical since this bill defines the aggregate as scrap metal and not a hazardous waste;
- All metal shredding facilities have to receive permits from and operate according to rules set by the SWRCB regarding stormwater discharge and other permits, air districts, and CUPAs; and
- This bill specifically states it doesn’t limit the authority of the air districts or CUPAs.
Proponents feel having one state entity – DTSC – responsible for permitting a facility will provide regulatory certainty, as well as address concerns raised by DTSC and community groups regarding the oversight of these facilities.
- The Bottom Line – A Triple Venn Diagram. At its core, SB 404 deals with three different items or concepts that do overlap in places:
- Regulation of MSR. This is likely the least contentious portion of this bill. SB 404 states that if a facility treats MSR according to the standards set in this bill, that facility does not have to be classified as a hazardous waste facility. However, if a facility chooses not to treat MSR according to those standards, it can still operate but it does have to operate this portion of its business under a hazardous waste facility permit.
- Resolution of Lawsuits. SB 404 resolves a number of lawsuits involving DTSC, the metal shredding industry, and entities arguing they were impacted by a metal shredding facility. This includes not just the lawsuits mentioned in the “Background” section of this analysis, but a number of others, including some involving the former Oakland A’s. Opinions on whether this bill’s resolution of these suits is appropriate vary and likely depend on whether a party views itself as likely to win in court and/or achieve a better regulatory outcome via the courts and/or is in a position to garner attorneys fees should it prevail in court.
- Regulation of Metal Shredder Aggregate. This appears to be the most contentious part of SB 404.
Some opponents argue since this bill defines metal shredder aggregate as scrap metal, DTSC should not be involved in the regulatory process. They are further concerned that adding a DTSC permitting process on top of the existing processes required by regional water boards, air districts, fire authorities, CUPAs, and others will just complicate the permitting process without adding any value.
Other opponents argue the opposite side of the same coin, fearing under this bill DTSC is losing regulatory authority it has now and is not given enough new authority – or specific direction – to regulate entities, protect environmentally sensitive communities, and more.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: Yes
According to the Senate Appropriations Committee, the bill will result in ongoing costs, potentially in the low millions of dollars every year to DTSC from the Hazardous Waste Facility Account (HWFA) for increased oversight and regulatory workload. These costs may be offset by fee revenue, since the bill requires DTSC’s costs to be reimbursed by metal shredders through an annual fee paid into the HWFA.
SUPPORT: (Verified 5/24/25)
Beacon House Associatin of San Pedro
Boys & Girls Clubs of The Los Angeles Harbor
California Council for Environmental & Economic Balance
California Metal Recyclers Coalition
California Police Chiefs Association
California Professional Firefighters
California State Association of Electrical Workers
California State Council of Laborers
California State Pipe Trades Council
California Steel Industries, INC.
California Strategies & Advocacy, LLC
Central City Association of Los Angeles
Ecology Recycling Services
Grand Vision Foundation
Latino Caucus of California Counties
Pacific Steel Group (PSG)
Peace Officers Research Association of California (PORAC)
Recology Waste Zero
Recycled Materials Association - West Coast Chapter
Republic Services INC.
Resource Recovery Coalition of California
Rincon San Luiseno Band of Indians; the
South Colton Diversity Committee
State of California Auto Dismantlers Association,
Strength Based Community Change
Waste Management
Western States Council Sheet Metal, Air, Rail and Transportation
Wilmington Chamber of Commerce
OPPOSITION: (Verified 5/24/25)
Cargill, Incorporated
Kramar's Iron and Metal Co.
Natural Resources Defense Council
Oakland Athletics
Pacific Auto Recycling Center
People's Collective for Environmental Justice
San Francisco Baykeeper
Universal Service Recycling, INC.
Valley Industry and Commerce Association (VICA)
West Oakland Environmental Indicators Project
Prepared by: Evan Goldberg / E.Q. / (916) 651-4108
5/27/25 12:20:09
SENATE COMMITTEE ON
Senator Anna Caballero, Chair
2025 - 2026 Regular Session
SB 404 (Caballero) - Hazardous materials: metal shredding facilities
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
This bill would establish a new regulatory structure for metal shredding facilities.
*********** ANALYSIS ADDENDUM – SUSPENSE FILE ***********
The following information is revised to reflect amendments
adopted by the committee on May 23, 2025
Fiscal Impact:
- Ongoing costs, potentially in the low millions of dollars annually (Hazardous Waste Facility Account [HWFA]) to DTSC for increased oversight and regulatory workload. Staff notes that these costs would be offset by fee revenue—SB 404 would require that all of DTSC’s costs be reimbursed by metal shredders through an annual fee to be deposited in the HWFA.
Author Amendments:
Authors amendments would establish the Metal Shredders Facility Account, among other things.
-- END --
SENATE COMMITTEE ON
Senator Anna Caballero, Chair
2025 - 2026 Regular Session
SB 404 (Caballero) - Hazardous materials: metal shredding facilities
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
This bill would establish a new regulatory structure for metal shredding facilities.
Fiscal Impact:
- The Department of Toxic Substances Control (DTSC) estimates ongoing costs of up to $3.8 million (Hazardous Waste Facility Account [HWFA]) and 11 position for increased oversight and regulatory workload. Staff notes that these costs would be offset by fee revenue—SB 404 would require that all of DTSC’s costs be reimbursed by metal shredders through an annual fee to be deposited in the HWFA.
Background:
California Hazardous Waste Control Law (HWCL). The HWCL is the state's program that implements and enforces federal hazardous waste laws in California and directs DTSC to oversee and implement the state’s hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management lifecycle of hazardous waste, from generation, to management, transportation, and ultimately disposal into a state or federal authorized facility.
Metal shredding. DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials.
When items are shredded, what is produced is a mix of:
- Ferrous metals that can be recycled;
- Non-ferrous metals that can be recycled;
- Potentially recyclable non-metallic commodities (e.g., plastic); and
- Metal shredder residue (MSR), which is waste that cannot be recycled, though under certain circumstances, it can be put to use as daily cover in solid waste landfills.
Metal shredders in California. There are 8 metal shredding companies in California operating at 10 locations in the state (one company – SA Recycling – has three locations).
Under current law, DTSC, CalRecycle, the SWRCB, local air districts, and CUPAs can all adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the HWCL.
Proposed Law:
This bill would establish a new regulatory structure for metal shredding facilities. Specifically, it would:
- Repeal existing law.
- Make a number of legislative findings and declarations.
- Define a number of terms and expand the definition of “metal shredding facility” to include the entire site and all contiguous properties under the control of the owner or operator who processes end-of-life vehicles, appliances, or other metallic feedstock materials to separate, sort, or remove recoverable ferrous or nonferrous metals from non-recyclable materials.
- Clearly state metal shredding facilities that are subject to and comply with this bill cannot be defined as hazardous waste facilities.
- Specify that facilities regulated under the state’s e-waste shredding law, facilities that shred wood, and facilities that shred tires would not be covered by this measure, nor would this measure cover feeder yards, metal crushers, metal shearers, or metal balers if those facilities do not conduct metal shredding operations.
- Repeal a specific 1988 policy adopted by DTSC titled “Auto Shredder Waste Policy and Procedures” and repeals any nonhazardous waste determination previously issued to any metal shredding facility under regulations adopted by DTSC.
- State that it will not limit the authority of air districts or certified uniformed program agencies (CUPAs).
Permits & Operations
- Require all metal shredding facilities to receive a permit from DTSC to continue operating in the state and sets up timelines to apply for a permit, along with detailed requirements for what each permit application should contain.
- Require each permit to be valid for 10 years, unless DTSC adopts a shorter time period for a given facility, and requires facilities to apply for a permit renewal two years before their permit expires.
- Require permit applicants to hold public meetings and report on those meetings to DTSC.
- Require DTSC to, once a facility submits a permit application, hold progress meetings at least once a year to inform the community of the status of the permitting process.
- Allow a metal shredding facility that has submitted a permit application but is not currently in full compliance with the requirements established by this bill to continue operating under certain conditions pending DTSC’s decision on the permit application.
- Require permit holders and applicants to develop a number of different policies, adhere to a number of different standards, and maintain a number of specific documents in order to ensure the safety of the operation.
- Require the facility owner or operator to develop a written plan for the prevention, detection, and suppression of fires – and share that plan with local emergency responders.
- Require the facility owner or operator to develop a stormwater management and control plant that includes specific provisions.
- Allow a facility owner to make certain changes to the facility without getting pre-approval from DTSC, provided the owner notifies DTSC 30 days before or after making the changes. The owner must provide an annual report to DTSC summarizing any changes that are made.
- Require all facilities to adhere to certain minimum construction standards.
- Allow metal shredder aggregate to be stockpiled outside the confines of an enclosure for limited periods of time if certain standards are met and approved by DTSC.
- Set standards for tracking and transporting metal shredder aggregate.
Classification of Materials
- State chemically treated MSR is not hazardous waste if certain standards are met.
- Set standards for transporting and disposing of chemically-treated MSR.
- Exempt a metal shredding facility from the requirement to treat MSR if the facility can demonstrate to DTSC each year – and DTSC agrees – that the waste generated at the facility does not exhibit any state or federal characteristic of hazardous waste.
Reporting
- Require, within one year after this bill takes effect, the owner or operator of a metal shredding facility to conduct a preliminary endangerment assessment and submit it to DTSC.
Closure
- Require the owner or operator of a metal shredding facility to have a written closure plan – approved by DTSC – that addresses a number of specific items.
Fees
- Require DTSC to collect an annual fee on all metal shredding facilities subject to this law. Require DTSC to establish and adopt regulations to administer the fee and set a fee schedule sufficient to reimburse its reasonable costs to implement the law. Allow for the fee schedule to be adjusted annually.
- Require the State Controller to establish a separate subaccount in the Hazardous Waste Control Account. Require that the fees collected pursuant to this bill be deposited into the subaccount and be available for expenditure by the department, upon appropriation by the Legislature, solely to implement and administer this chapter.
Enforcement
- Grant DTSC the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
- State DTSC may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility based on a number of detailed circumstances.
Related Legislation:
SB 1234 (Allen, 2024) contained language similar to what is found in SB 404. The language was inserted into SB 1234 in the Assembly and approved by the Assembly Environmental Safety and Toxic Materials Committee on a 7-0 vote, but the bill was held in the Assembly Appropriations Committee.
AB 2851 (Bonta, Chapter 743, Statutes of 2024) requires an air district – when it has a metal shredding facility in its district – to develop requirements for facility-wide fence-line air quality monitoring at those facilities. It also directs DTSC to require metal shredding facilities to monitor and report any hazardous waste constituents requested by the department.
Staff Comments:
All of SB 404’s activities would be funded by the HWFA, which is an existing subaccount under the Hazardous Waste Control Account (HWCA), used for regulatory and oversight responsibilities of DTSC authorized facilities. DTSC's regulatory costs would be considered in setting the metal shredding facilities fee rate, including the costs previously authorized in DTSC’s Metal Shredder Initiative (3960-084-BCP-2022-MR) and costs associated with the implementation of AB 2851 (Chaptered - 9/27/2024). DTSC notes that all cost estimates are based on the oversight of the shredders that currently operate in the state. An increase in the number of metal shredders seeking permits may result in an increase in resources required to provide oversight.
-- END --
SENATE COMMITTEE ON ENVIRONMENTAL QUALITY
Senator Blakespear, Chair
2025 - 2026 Regular
Bill No: SB 404
Author: | Caballero | ||
Version: | 3/24/2025 | Hearing Date: | 4/2/2025 |
Urgency: | No | Fiscal: | Yes |
Consultant: | Evan Goldberg | ||
SUBJECT: Hazardous materials: metal shredding facilities
DIGEST: Establishes a new regulatory structure for metal shredding facilities.
ANALYSIS:
Existing law:
1) Defines a “metal shredding facility” as an operation that uses a shredding technique to process end-of-life vehicles, appliances, and other forms of scrap metal to help separate and sort ferrous metals, nonferrous metals, and other recyclable materials from non-recyclable materials. (Health & Safety Code (HSC) §25150.82).
2) Allows the Department of Toxics Substance Control (DTSC) in consultation with the Department of Resources Recycling and Recovery (CalRecycle), the State Water Resources Control Board (SWRCB), and local air districts to adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL). (HSC §25150.82).
3) Precludes DTSC from adopting management standards that are less stringent than standards set by federal law. (HSC §25150.82).
4) Allows waste from a metal shredder (known as metal shredder residue or MSR) to be classified and managed as nonhazardous waste, provided certain standards are met. Such nonhazardous waste can be used as alternative daily cover or for beneficial reuse, or it may be disposed of if it complies with regulations in the Water Code. (HSC §25150.82).
5) Allows DTSC to assess a fee on metal shredding facilities to cover the cost of the program. (HSC §25150.84).
6) Deems that treated MSR managed under the standards set in law is deemed to be solid waste when it is accepted by a solid waste landfill or other authorized location for disposal or for use as alternative daily cover or other beneficial use. (HSC §25150.86).
This bill:
- Repeals existing law.
- Makes a number of legislative findings and declarations.
- Defines a number of terms and expands the definition of “metal shredding facility” to include the entire site and all contiguous properties under the control of the owner or operator who processes end-of-life vehicles, appliances, or other metallic feedstock materials to separate, sort, or remove recoverable ferrous or nonferrous metals from non-recyclable materials.
- Clearly states metal shredding facilities that are subject to and comply with this bill cannot be defined as hazardous waste facilities.
- Specifies facilities regulated under the state’s e-waste shredding law, facilities that shred wood, and facilities that shred tires are not covered by this measure, nor are feeder yards, metal crushers, metal shearers, or metal balers if those facilities do not conduct metal shredding operations.
- Repeals a specific 1988 policy adopted by DTSC titled “Auto Shredder Waste Policy and Procedures” and repeals any nonhazardous waste determination previously issued to any metal shredding facility under regulations adopted by DTSC.
- States the bill will not limit the authority of air districts or certified uniformed program agencies (CUPAs).
Permits & Operations
8) Requires all metal shredding facilities to receive a permit from DTSC to continue operating in the state and sets up timelines to apply for a permit, along with detailed requirements for what each permit application should contain.
9) Requires each permit to be valid for 10 years, unless DTSC adopts a shorter time period for a given facility, and requires facilities to apply for a permit renewal two years before their permit expires.
10) Requires permit applicants to hold public meetings and report on those meetings to DTSC.
11) Requires DTSC to, once a facility submits a permit application, hold progress meetings at least once a year to inform the community of the status of the permitting process.
12) Allows a metal shredding facility that has submitted a permit application but is not currently in full compliance with the requirements established by this bill to continue operating under certain conditions pending DTSC’s decision on the permit application.
13) Requires permit holders and applicants to develop a number of different policies, adhere to a number of different standards, and maintain a number of specific documents in order to ensure the safety of the operation.
14) Requires the facility owner or operator to develop a written plan for the prevention, detection, and suppression of fires – and share that plan with local emergency responders.
15) Requires the facility owner or operator to develop a stormwater management and control plant that includes specific provisions.
16) Allows a facility owner to make certain changes to the facility without getting pre-approval from DTSC, provided the owner notifies DTSC 30 days before or after making the changes. The owner must provide an annual report to DTSC summarizing any changes that are made.
17) Requires all facilities to adhere to certain minimum construction standards.
18) Allows metal shredder aggregate to be stockpiled outside the confines of an enclosure for limited periods of time if certain standards are met and approved by DTSC.
19) Sets standards for tracking and transporting metal shredder aggregate.
Classification of Materials
20) States chemically treated MSR is not hazardous waste if certain standards are met.
21) Sets standards for transporting and disposing of chemically-treated MSR.
22) Exempts a metal shredding facility from the requirement to treat MSR if the facility can demonstrate to DTSC each year – and DTSC agrees – that the waste generated at the facility does not exhibit any state or federal characteristic of hazardous waste.
Reporting
23) Requires, within one year after this bill takes effect, the owner or operator of a metal shredding facility to conduct a preliminary endangerment assessment and submit it to DTSC.
Closure
24) Requires the owner or operator of a metal shredding facility to have a written closure plan – approved by DTSC – that addresses a number of specific items.
Fees
25) Requires DTSC to collect an annual fee on all metal shredding facilities subject to this law. DTSC must establish and adopt regulations to administer the fee and set a fee schedule sufficient to reimburse its reasonable costs to implement the law. The fee schedule may be adjusted annually.
26) Requires the State Controller to establish a separate subaccount in the Hazardous Waste Control Account. The fees collected pursuant to this bill must be deposited into the subaccount and be available for expenditure by the department, upon appropriation by the Legislature, solely to implement and administer this chapter.
Enforcement
27) Grants DTSC the authority to suspend the authorization of any metal shredding facility that has been determined to pose an imminent and substantial endangerment to human health or the environment.
28) States DTSC may deny, revoke, or suspend a permit authorizing the operation of a metal shredding facility based on a number of detailed circumstances.
Background
California Hazardous Waste Control Law (HWCL). The HWCL is the state's program that implements and enforces federal hazardous waste laws in California and directs DTSC to oversee and implement the state’s hazardous waste laws and regulations. Any person who stores, treats, or disposes of hazardous waste must obtain a permit from DTSC. The HWCL covers the entire management lifecycle of hazardous waste, from generation, to management, transportation, and ultimately disposal into a state or federal authorized facility.
What Do Metal Shredders Do & Produce? DTSC defines a metal shredder as an entity that processes end-of-life vehicles, appliances, and other forms of scrap metal, separates recyclable materials from non-recyclable materials, and then sells the recyclable materials and disposes of the non-recyclable materials.
When items are shredded, what is produced is a mix of:
- Ferrous metals that can be recycled;
- Non-ferrous metals that can be recycled;
- Potentially recyclable non-metallic commodities (e.g., plastic); and
- Metal shredder residue (MSR), which is waste that cannot be recycled, though under certain circumstances, it can be put to use as daily cover in solid waste landfills.
Examples of ferrous metals – which make up the bulk of what shredders handle but have the least amount of value by weight – include stainless steel, carbon steel, mild steel, iron, and cast/wrought iron.
Examples of nonferrous metals – which make up a lower percentage of what shredders handle but have the most amount of value by weight – include copper, aluminum, brass, lead, tin, titanium, zinc, nickel, gold, silver, platinum, and cobalt.
Examples of MSR – which have no market value and must be properly disposed of – include glass, fiber, rubber, wood, dirt, and plastic.
How Many Metal Shredders Are There In California? There are 8 metal shredding companies in California operating at 10 locations in the state (one company – SA Recycling – has three locations).
The Late 1980s to Today – A Brief History of Metal Shredding Regulation. Based on the hazardous characteristics of MSR, metal shredding facilities do generate hazardous waste and – prior to the late 1980s – were subject to hazardous waste requirements, including permitting, transportation and disposal.
However, in the late 1980s, in an effort to relax the requirements on metal shredding facilities, the Department of Health Services (DHS) – the predecessor of DTSC – determined treating MSR using chemical stabilization techniques could effectively eliminate the harm posed by MSR. As a result, this waste was determined – when properly treated – to no longer pose a significant hazard to human health and safety, livestock, and wildlife.
Following this determination, seven metal shredding facilities applied for and were granted nonhazardous waste classification letters by DHS, and later DTSC, as long as they used the metal treatment fixation technologies approved by the state. Known as “f letters,” these classifications ultimately allowed treated MSR to be handled, transported, and disposed of as non-hazardous waste in class III landfills (i.e., solid (non-hazardous) waste landfills).
SB 1249 (Hill) of 2014. Following concerns about metal shredder safety, SB 1249 (Hill, 2014) was enacted into law. The bill gave DTSC the authority to develop alternative management standards (different from a hazardous waste facility permit) if, after evaluating metal shredding facilities, DTSC determined alternative management standards would still protect the public and the environment.
SB 1249 gave DTSC a timeframe to develop and adopt alternative management standards that may have led to the elimination of the “f letter” process, but DTSC never adopted any standards and the authority to do so sunset under the terms of SB 1249.
Cue The Lawyers – Part One. More than a decade before the enactment of SB 1249, DTSC issued “Official Policy/Procedures #88-6 Auto Shredder Waste Policy and Procedures” – better known as OPP #88-6 – in November 1988. The policy classified metal shredder aggregate as in-process material, not a waste that needed to be regulated under the state’s HWCL.
More than 30 years after it was established – and 7 years after the passage of SB 1249 – OPP #88-6 was unilaterally administratively rescinded by DTSC in October 2021. DTSC stated the policy was inexact, self-contradictory and in conflict with federal and state law.
One month later, in November 2021, Pacific Auto Recycling Center (PARC) filed a complaint against DTSC asking for OPP #88-6 to be re-instated. PARC argued the DTSC policy was actually a regulation under the state’s Administrative Procedure Act (APA) and as such, DTSC couldn’t simply erase OPP #88-6 without going through the APA’s regulatory process.
In June 2023, the trial court agreed with PARC, ordered DTSC to re-instate OPP #88-6, and stated DTSC needed to go through the APA if it wished to rescind OPP #88-6, writing in part:
“Based on the industry’s more than 30-year reliance on OPP #88-6, allowing the rescission of OPP #88-6 to remain in effort would increase the costs of scrap metal recycling, thereby causing significant disruption to an issue of critical environmental importance to California.
“Further, DTSC did not consider the industry’s reliance when rescinding OPP #88-6. None of the portions of the August 2021 final evaluation cited by respondents mentions OPP #88-6 or demonstrates any consideration of the impact of rescission on the industry, including the impact on operating costs and viability to scrap metal recyclers. Rather, DTSC determined that metal shredder aggregate was a hazardous waste, which disposal must be regulated. (AR349-51.) DTSC did not consider the relevant factor of the scrap metal recycling industry’s reliance on OPP #88-6.
“Under the circumstances described above, even though OPP #88-6 was adopted without compliance with the APA, DTSC was required to comply with APA rulemaking requirements before rescinding OPP #88-6. Pending compliance with the APA, OPP #88-6 must be reinstated.”
DTSC has appealed this decision to the California Court of Appeal, which put the reinstatement of OPP #88-6 on hold. The appeal is currently scheduled for an April 22, 2025, hearing.
Cue The Lawyers – Part 2. In November 2021, the Institute of Scrap Recycling Industries (ISRI) and several individual companies filed suit against DTSC following its adoption of emergency regulations to remove metal shredder aggregate – the ferrous and non-ferrous metals that are recycled – from the definition of scrap metal, which effectively subjected the material to the state’s HWCL.
In March 2022, the court granted ISRI’s request to prevent the regulation from taking effect, ruling:
“The Court finds that Petitioners are likely to prevail on the merits of their claim that the facts recited by DTSC … do not constitute an emergency within the meaning of the Administrative Procedure Act, and that on balance, in the circumstances of this case, the harm to Petitioners if the injunction is not granted is greater than the harm to DTSC if the injunction is granted.”
The court did not rule on the underlying merits of the case and after the injunction was granted, DTSC allowed the emergency regulation to expire. The remaining claims on the merits have been consolidated with a different 2019 case in which ISRI and several individual companies charged DTSC with attempting to require metal shredding companies to obtain hazardous waste treatment facility permits for metal processing operations and regulate such metal processing operations as hazardous waste in violation of the law. That case is pending before the court and is expected to go to trial in late 2026.
Comments
- Purpose of Bill. According to the author, “Metal shredding facilities recycle millions of end-of-life vehicles, household appliances, and other metallic items produced, used, and discarded annually in California. Unless recycled, these metal materials would rapidly overwhelm all available landfill capacity, creating a massive accumulation of damaged and abandoned cars, appliances, and other items.
“Metal shredding poses environmental concerns to surrounding communities because the shredding process has the potential to release particulate materials and has a risk of causing fire. The current framework for hazardous waste does not include metal shredding facilities and therefore the facilities are not required to obtain a permit and are not regulated by the California Department of Toxics and Substance Control (DTSC). Without a comprehensive regulatory framework, DTSC on its own has begun to regulate the industry on a facility-by-facility basis using a hazardous waste enforcement framework, creating an uncertain and inconsistent legal environment, which has resulted in litigation.
“SB 404 will settle this ambiguity resolve this uncertainty, end the litigation and ensure comprehensive and robust oversight and enforcement of metal shredding facilities under DTSC’s authority. This bill will ensure that California remains a sustainability leader in “reducing, reusing and recycling” by fostering the recycling of scrap metal into new metal products, while at the same time protecting adjoining communities from environmental pollution.”
- I Fought The Law. If passed by the Legislature and signed into law, SB 404 would effectively end the litigation referenced in the “Background” section of this analysis, as well as other related lawsuits. The bill repeals OPP #88-6 and because SB 404 defines metal shredder aggregate as scrap metal and not hazardous waste, the bill also nullifies DTSC’s since-expired emergency regulation that sought to remove metal shredder aggregate from the definition of scrap metal.
- Making Shredded MSR Non-Hazardous. As noted in the “Background” section, DHS – DTSC’s predecessor – determined in the 1980s that then-current metal treatment fixation technologies could lower the soluble concentrations of metals in MSR, making this treated waste “insignificant” as a hazard to human health and safety, livestock, and wildlife. Following that determination, a number of metal shredding facilities applied for and received nonhazardous waste determinations – known as “f letters” – from DHS, and later DTSC. As such, their treated MSR is regulated as nonhazardous waste provided they use the approved metal fixation treatment formulas and technologies to deal with their MSR.
This bill eliminates the “f-letter” process and allows chemically treated MSR to be used beneficially as alternative daily cover or otherwise disposed of in authorized solid waste landfills provided they adhere to or exceed the MSR treatment fixation technology standards set in the bill. Those that cannot meet the standards may – based on the March 24, 2025, amendments to the bill –alternatively handle MSR as hazardous waste (see Comment 6).
4) Metal Shredder Aggregate, MSR, & DTSC Permitting. While this is a bit of an oversimplification, it may be helpful to think of metal shredding facilities as producing two main end products – metal shredder aggregate and MSR.
The metal shredder aggregate consists of the ferrous and nonferrous materials that are recycled and sold, while the MSR is just that – residue and waste that must be properly disposed of in accordance with standards set forth by the bill.
SB 404 declares metal shredder aggregate is not waste but is an in-process material.
The bill also declares that when MSR is treated in accordance with the standards in the bill, it does not require a hazardous waste permit to be transported or disposed of, thus eliminating the need for the “f-letter” process.
5) Metal Shredder Aggregate – Should DTSC Regulate It? Under current law, DTSC, CalRecycle, the SWRCB, local air districts, and CUPAs can all adopt regulations to set management standards for metal shredding facilities. These standards are used to regulate these facilities in lieu of standards set out in the Hazardous Waste Control Law (HWCL).
Three opponents to the bill – Universal Service Recycling (Universal), Pacific Auto Recycling Center (PARC), and Kramar’s Iron & Metal Co. (Kramar) – identify themselves as small businesses that have shredded and recycled metal in California for a number of years.
They argue this portion of the bill is unnecessary and/or duplicative of current law in part because;
- Having DTSC regulate the metal shredder aggregate is somewhat nonsensical since the bill defines the aggregate as scrap metal and not a hazardous waste;
- All metal shredding facilities have to receive permits from and operate according to rules set by the SWRCB regarding stormwater discharge and other permits, air districts, and CUPAs; and
- The bill specifically states it doesn’t limit the authority of the air districts or CUPAs.
Proponents feel having one state entity – DTSC – responsible for permitting a facility will provide regulatory certainty, as well as address concerns raised by DTSC and community groups regarding the oversight of these facilities.
6) MSR – What If A Facility Can’t Or Doesn’t Want To Meet The Bill’s Treatment Standards? SB 404 states for a metal shredding facility to receive a permit to continue to operate in California, it must treat MSR in a specific manner if it wants the waste to be classified as non-hazardous.
In a March 13, 2025, letter to the Committee, Universal, PARC, and Kramar state they do not chemically treat MSR and as such, are currently regulated by DTSC as a hazardous waste generator. They do not want to be required to treat MSR under the standards set by the bill in order to receive a permit and would prefer to remain under the current regulatory regime set by DTSC for hazardous waste generators.
This issue may have been addressed by the March 24, 2025, author’s amendments to the bill. Page 27, Lines 23-28, specifically state:
“Untreated metal shredder residue … shall be chemically treated in accordance with this section or managed in accordance with all applicable requirements of …” existing law and regulation related to hazardous waste (emphasis added)
7) The Bottom Line – A Triple Venn Diagram. At its core, SB 404 deals with three different items or concepts that do overlap in places:
- Regulation of MSR. This is likely the least contentious portion of the bill. SB 404 states that if a facility treats MSR according to the standards set in the bill, that facility does not have to be classified as a hazardous waste facility. However, if a facility chooses not to treat MSR according to those standards, it can still operate but it does have to operate this portion of its business under a hazardous waste facility permit.
- Resolution of Lawsuits. SB 404 resolves a number of lawsuits involving DTSC, the metal shredding industry, and entities arguing they were impacted by a metal shredding facility. This includes not just the two lawsuits mentioned in the “Background” section of this analysis, but a number of others, including some involving the former Oakland A’s. Opinions on whether the bill’s resolution of these suits is appropriate vary and likely depend on whether a party views itself as likely to win in court and/or achieve a better regulatory outcome via the courts and/or is in a position to garner attorneys fees should it prevail in court.
- Regulation of Metal Shredder Aggregate. This appears to be the most contentious part of SB 404.
Some opponents argue since the bill defines metal shredder aggregate as scrap metal, DTSC should not be involved in the regulatory process. They are further concerned that adding a DTSC permitting process on top of the existing processes required by regional water boards, air districts, fire authorities, CUPAs, and others will just complicate the permitting process without adding any value.
Other opponents argue the opposite side of the same coin, fearing under the bill DTSC is losing regulatory authority it has now and is not given enough new authority – or specific direction – to regulate entities, protect environmentally sensitive communities, and more.
8) Open Issues. As with many large bills attempting to set up an entirely new regulatory structure, there are a number of questions and issues the Committee may wish to encourage the author to continue working toward resolving should the bill be approved today. Among those:
- Does the regulatory structure established by this bill allow DTSC to protect communities and members of the public who will be impacted by the operation of a metal shredding facility?
- While the bill states it does not limit the authority of water districts, air districts, and CUPAs, does it allow DTSC to add related regulations on top of what those entities require? If so, is that appropriate?
- Similarly, is the language in the bill clear that it does not alter or reduce any enforcement authority currently held by water districts, air districts, CUPAs and other local entities?
- Should the bill specify the amount of time DTSC has to review and approve – or reject – a permit application?
- Should the bill be more detailed in terms of the conditions DTSC can require a permit applicant to meet – especially if an applicant has a history of violations – or is the open-ended structure of the bill that gives DTSC flexibility appropriate?
- Should there be more clarity around how DTSC can impose requirements on facilities that apply for a permit yet don’t meet the standards set forth in the bill? While SB 404 requires an applicant to put forth a plan to meet the standards the bill creates, there are no deadlines for coming into compliance and it’s not clear DTSC can set deadlines for an applicant to meet.
- Does the bill allow a metal shredding operation to expand its capacity beyond what is allowed under a DTSC-issued permit without having to get approval from DTSC and/or provide public notice prior to such an expansion?
- Are the public notice and hearing requirements sufficient?
- The bill requires a facility to “minimize” the release of light fibrous material (LFM) by “implementing all reasonable and feasible operational or engineering methods.” Is that standard high enough to prevent LFM from being released or should facilities be required to implement something akin to the “best available control technology” (BACT), which is something air boards often require in other contexts?
- Should the regulations governing how metal shredder aggregate can be transported be more detailed and/or should DTSC be directed to develop that detail via the regulatory process?
DOUBLE REFERRAL:
If this measure is approved by the Senate Environmental Quality Committee, the do pass motion must include the action to re-refer the bill to the Senate Judiciary Committee.
Related/Prior Legislation
SB 1234 (Allen, 2024) contained language similar to what is found in SB 404. The language was inserted into SB 1234 in the Assembly and approved by the Assembly Environmental Safety and Toxic Materials Committee on a 7-0 vote, but the bill was held in the Assembly Appropriations Committee without a vote.
AB 2851 (Bonta, Chapter 743, Statutes of 2024) requires an air district – when it has a metal shredding facility in its district – to develop requirements for facility-wide fence-line air quality monitoring at those facilities. It also directs DTSC to require metal shredding facilities to monitor and report any hazardous waste constituents requested by the department.
SOURCE:
California Metal Recyclers Coalition
SUPPORT:
Beacon House Association of San Pedro
Boys & Girls Clubs of The Los Angeles Harbor
California Metal Recyclers Coalition
California Professional Firefighters
California State Association of Electrical Workers
California State Council of Laborers
California State Pipe Trades Council
California Steel Industries, Inc.
California Strategies & Advocacy, LLC
Central City Association of Los Angeles
Ecology Recycling Services
Grand Vision Foundation
Latino Caucus of California Counties
Pacific Steel Group (PSG)
Peace Officers Research Association of California (PORAC)
Recology Waste Zero
Recycled Materials Association - West Coast Chapter
Republic Services Inc.
Resource Recovery Coalition of California
Rincon San Luiseno Band of Indians
South Colton Diversity Committee
State of California Auto Dismantlers Association
Strength Based Community Change
Waste Management
Western States Council Sheet Metal, Air, Rail and Transportation
Wilmington Chamber of Commerce
OPPOSITION:
Cargill, Inc.
Kramar's Iron and Metal Co.
Pacific Auto Recycling Center
Universal Service Recycling, Inc.
Valley Industry and Commerce Association (VICA)
-- END --
Bill Author
Bill Co-Author(s):