SB 671: Pedestrian crossing signals.
- Session Year: 2025-2026
- House: Senate
- Latest Version Date: 2025-10-03
Current Status:
Passed
(2025-10-03: Chaptered by Secretary of State. Chapter 326, Statutes of 2025.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Under existing law, a pedestrian control signal showing a WALK or approved Walking Person symbol means a pedestrian may proceed across the roadway in the direction of the signal. Under existing law, a pedestrian facing a flashing DONT WALK or WAIT or approved Upraised Hand symbol with a countdown signal, as specified, means a pedestrian may start crossing the roadway in the direction of the signal but requires the pedestrian to finish crossing prior to the display of the steady DONT WALK or WAIT or approved Upraised Hand symbol, as specified.
Upon the first placement or replacement of a traffic-actuated signal, as specified, existing law requires that traffic-actuated signal to be installed and maintained to detect bicycle or motorcycle traffic on the roadway. For these purposes, existing law defines a traffic-actuated signal as an official traffic signal, as specified, that displays one or more of its indications in response to traffic detected by mechanical, visual, electrical, or other means. Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, existing law requires that the traffic-actuated signal to be installed and maintained to have a leading pedestrian interval (LPI) and include the installation, activation, and maintenance of an accessible pedestrian signal (APS) and detector that complies with certain sections of the California Manual on Uniform Traffic Control Devices (CA MUTCD).
At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, this bill would require the walk indication and other visual signals to comply with CA MUTCD. The bill would require these pedestrian signal heads to have an APS pushbutton or touch-free APS that activates WALK or DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats. The bill would require touch-free APS to be installed at new signalized pedestrian crossings on capital projects on the state highway system, encroachment projects, and highway maintenance-funded projects, as specified. The bill would require, as soon as practicable, all existing state-owned or -operated traffic signals located in certain areas to be identified and recorded in the Department of Transportation management system (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. The bill would require LPIs to be implemented at these existing state-owned or -operated traffic signals locations at the next opportunity for regularly scheduled operational reviews. The bill would require local agencies to report the implementation of LPIs at locations where local agencies are operating state-owned traffic-actuated signals so these locations can be included in the TMS inventory database. By placing new requirements on local agencies, this bill would create a state-mandated local program.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that, if the Commission on State Mandates determines that the bill contains costs mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
Under existing law, a pedestrian control signal showing a WALK or approved Walking Person symbol means a pedestrian may proceed across the roadway in the direction of the signal. Under existing law, a pedestrian facing a flashing DONT WALK or WAIT or approved Upraised Hand symbol with a countdown signal, as specified, means a pedestrian may start crossing the roadway in the direction of the signal but requires the pedestrian to finish crossing prior to the display of the steady DONT WALK or WAIT or approved Upraised Hand symbol, as specified.
Upon the first placement or replacement of a traffic-actuated signal, as specified, existing law requires that traffic-actuated signal to be installed and maintained to detect bicycle or motorcycle traffic on the roadway. For these purposes, existing law defines a traffic-actuated signal as an official traffic signal, as specified, that displays one or more of its indications in response to traffic detected by mechanical, visual, electrical, or other means. Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, existing law requires that the traffic-actuated signal to be installed and maintained to have a leading pedestrian interval (LPI) and include the installation, activation, and maintenance of an accessible pedestrian signal (APS) and detector that complies with certain sections of the California Manual on Uniform Traffic Control Devices (CA MUTCD).
At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, this bill would require the walk indication and other visual signals to comply with CA MUTCD. The bill would require these pedestrian signal heads to have an APS pushbutton or touch-free APS that activates WALK or DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats. The bill would require touch-free APS to be installed at new signalized pedestrian crossings on capital projects on the state highway system, encroachment projects, and highway maintenance-funded projects, as specified. The bill would require, as soon as practicable, all existing state-owned or -operated traffic signals located in certain areas to be identified and recorded in the Department of Transportation management system (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. The bill would require LPIs to be implemented at these existing state-owned or -operated traffic signals locations at the next opportunity for regularly scheduled operational reviews. The bill would require local agencies to report the implementation of LPIs at locations where local agencies are operating state-owned traffic-actuated signals so these locations can be included in the TMS inventory database. By placing new requirements on local agencies, this bill would create a state-mandated local program.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that, if the Commission on State Mandates determines that the bill contains costs mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
Under existing law, a pedestrian control signal showing a WALK or approved Walking Person symbol means a pedestrian may proceed across the roadway in the direction of the signal. Under existing law, a pedestrian facing a flashing DONT WALK or WAIT or approved Upraised Hand symbol with a countdown signal, as specified, means a pedestrian may start crossing the roadway in the direction of the signal but requires the pedestrian to finish crossing prior to the display of the steady DONT WALK or WAIT or approved Upraised Hand symbol, as specified.
Upon the first placement or replacement of a traffic-actuated signal, as specified, existing law requires that traffic-actuated signal to be installed and maintained to detect bicycle or motorcycle traffic on the roadway. For these purposes, existing law defines a traffic-actuated signal as an official traffic signal, as specified, that displays one or more of its indications in response to traffic detected by mechanical, visual, electrical, or other means. Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, existing law requires that the traffic-actuated signal to be installed and maintained to have a leading pedestrian interval (LPI) and include the installation, activation, and maintenance of an accessible pedestrian signal (APS) and detector that complies with certain sections of the California Manual on Uniform Traffic Control Devices (CA MUTCD).
At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, this bill would require the walk indication and other visual signals to comply with CA MUTCD. The bill would require these pedestrian signal heads to have an APS pushbutton or touch-free APS that activates WALK or DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats. The bill would require touch-free APS to be installed at new signalized pedestrian crossings on capital projects on the state highway system, encroachment projects, and highway maintenance-funded projects, as specified. The bill would require, as soon as practicable, all existing state-owned or -operated traffic signals located in certain areas to be identified and recorded in the Department of Transportation management system (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. The bill would require LPIs to be implemented at these existing state-owned or -operated traffic signals locations at the next opportunity for regularly scheduled operational reviews. The bill would require local agencies to report the implementation of LPIs at locations where local agencies are operating state-owned traffic-actuated signals so these locations can be included in the TMS inventory database. By placing new requirements on local agencies, this bill would create a state-mandated local program.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that, if the Commission on State Mandates determines that the bill contains costs mandated by the state, reimbursement for those costs shall be made pursuant to the statutory provisions noted above.
(a)As used in this section, the following terms have the following definitions:
(1)Accessible pedestrian signal or APS means an integrated device that communicates information about the WALK and DONT WALK intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision.
(2)Leading pedestrian interval or LPI means an official traffic control signal that advances the WALK signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.
(3)Pedestrian hybrid beacon means a special type of hybrid beacon used to warn and control traffic at an unsignalized location to assist pedestrians in crossing a street or highway at a marked crosswalk. Following an actuation by a pedestrian, a pedestrian hybrid beacon face shall display to motorists and bicyclists a flashing CIRCULAR YELLOW signal indication, followed by a steady CIRCULAR YELLOW signal indication, followed by both steady CIRCULAR RED signal indications during the pedestrian walk interval and followed by alternating flashing CIRCULAR RED signal indications during the pedestrian change interval. Upon termination of the pedestrian change interval, the pedestrian hybrid beacon faces shall revert to a dark, not illuminated, condition. When a pedestrian makes an actuation, they shall wait for a WALK signal to appear on the pedestrian head in order to proceed. After the countdown, a DONT WALK signal appears, and the pedestrian hybrid beacon has to be activated again to initiate a WALK signal.
(4)Replaced or replacement means the relocation or exchange in place of all existing signal poles at an intersection with new signal poles.
(5)A traffic-actuated signal is an official traffic control signal, as specified in Section 445, that displays one or more of its indications in response to the presence of traffic detected by mechanical, visual, electrical, or other means.
(6)Caltrans means the Department of Transportation.
(b)Upon the first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, the traffic-actuated signal shall, to the extent feasible and in conformance with professional traffic engineering practice, be installed and maintained to detect lawful bicycle or motorcycle traffic on the roadway.
(c)Cities, counties, and cities and counties shall not be required to comply with the provisions contained in subdivision (b) until the Department of Transportation, in consultation with these entities, has established uniform standards, specifications, and guidelines for the detection of bicycles and motorcycles by traffic-actuated signals and related signal timing.
(d)(1)At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, the walk indication and other visual signals, including, but not limited to, LPIs and countdown pedestrian signals, shall comply with the California Manual on Uniform Traffic Control Devices (CA MUTCD), 4E.11. These pedestrian signal heads shall have an APS pushbutton or touch-free APS that activates WALK and DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats, including, but not limited to, audible tones, speech messages, and vibrotactile surfaces. These features shall be activated, maintained, and available at all times of the day.
(2)(A)Touch-free APS shall be installed at new signalized pedestrian crossings on capital projects on the state highway system, defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects according to the following schedule:
(i)Capital outlay support projects that have a ready to list date.
(ii)Capital outlay support projects that are in construction before October 18, 2021.
(iii)Encroachment permit projects that have been approved on or after October 18, 2021.
(iv)Highway maintenance-funded projects that have a ready to list date on or after October 18, 2021.
(B)(i)When a touch-free APS is installed at an existing signalized pedestrian crossing, or in response to a federal Americans with Disability Act (ADA) access request, on capital projects on the state highway system, all APS at that location shall be upgraded to touch-free APS.
(ii)The installation of touch-free APS shall not require the upgrading of other ADA components, including, but not limited to, curb ramps or sidewalks, unless those components are disturbed.
(3)When performing maintenance and repair activities on capital projects on the state highway system, as defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects, the maintenance and repair shall consider using touch-free APS.
(4)Unsignalized pedestrian crossings at signalized intersections, including, but not limited to, intersections with free-right turns, may remain unsignalized.
(e)(1)Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, the traffic-actuated signal shall be installed and maintained to have an LPI and a touch-free APS, in compliance with the California Manual on Uniform Traffic Control Devices (CA MUTCD). The touch-free APS shall be activated.
(2)Caltrans shall implement LPIs on existing state-owned or -operated traffic-actuated signals capable of being implemented with remote installation or in-person programming when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the traffic-actuated signal is in any of the following areas, unless prohibited by the CA MUTCD:
(A)A residential district, as determined by Section 22507.5.
(B)A business district, as defined in Sections 235 and 240.
(C)A business activity district, as defined in Section 22358.9.
(D)A safety corridor, as defined in Section 2B.13 of the CA MUTCD.
(E)A school zone, as defined in Section 1A.13.185 of the CA MUTCD.
(F)Areas with a high concentration of pedestrians and cyclists, as defined in Section 2B.13 and Table 2B.106(CA) of the CA MUTCD.
(3)(A)As soon as practicable, all existing state-owned or -operated traffic signals located in the areas described in subparagraphs (A) to (F), inclusive, of paragraph (2) shall be identified and recorded in the Caltrans Management System (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. LPIs shall be implemented at these existing state-owned or -operated traffic signal locations at the next opportunity for regularly scheduled operational reviews. Traffic signals that have been implemented with LPIs shall be recorded in the TMS inventory database.
(B)As soon as practicable, Caltrans district signal operations units shall formally notify, in writing, local agencies operating state-owned traffic-actuated signals in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), about the opportunity to implement LPI on the signals. Additionally, these local agencies shall report their implementation of LPIs at these locations to Caltrans so the locations can be included in the TMS inventory database.
(C)For existing traffic signals not in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), Caltrans shall follow the same criteria for implementing LPIs in paragraph (2).
(4)Depending on the physical location and traffic conditions, locations where LPIs have been implemented pursuant to this subdivision may restrict turns on red using illuminated blank out signs and enhanced signing. LPIs are to be implemented at existing signals with touch-free APS and pedestrian countdown signals.
SEC. 2.If the Commission on State Mandates determines that this act contains costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
(a)As used in this section, the following terms have the following definitions:
(1)Accessible pedestrian signal or APS means an integrated device that communicates information about the WALK and DONT WALK intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision.
(2)Leading pedestrian interval or LPI means an official traffic control signal that advances the WALK signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.
(3)Pedestrian hybrid beacon means a special type of hybrid beacon used to warn and control traffic at an unsignalized location to assist pedestrians in crossing a street or highway at a marked crosswalk. Following an actuation by a pedestrian, a pedestrian hybrid beacon face shall display to motorists and bicyclists a flashing CIRCULAR YELLOW signal indication, followed by a steady CIRCULAR YELLOW signal indication, followed by both steady CIRCULAR RED signal indications during the pedestrian walk interval and followed by alternating flashing CIRCULAR RED signal indications during the pedestrian change interval. Upon termination of the pedestrian change interval, the pedestrian hybrid beacon faces shall revert to a dark, not illuminated, condition. When a pedestrian makes an actuation, they shall wait for a WALK signal to appear on the pedestrian head in order to proceed. After the countdown, a DONT WALK signal appears, and the pedestrian hybrid beacon has to be activated again to initiate a WALK signal.
(4)Replaced or replacement means the relocation or exchange in place of all existing signal poles at an intersection with new signal poles.
(5)A traffic-actuated signal is an official traffic control signal, as specified in Section 445, that displays one or more of its indications in response to the presence of traffic detected by mechanical, visual, electrical, or other means.
(6)Caltrans means the Department of Transportation.
(b)Upon the first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, the traffic-actuated signal shall, to the extent feasible and in conformance with professional traffic engineering practice, be installed and maintained to detect lawful bicycle or motorcycle traffic on the roadway.
(c)Cities, counties, and cities and counties shall not be required to comply with the provisions contained in subdivision (b) until the Department of Transportation, in consultation with these entities, has established uniform standards, specifications, and guidelines for the detection of bicycles and motorcycles by traffic-actuated signals and related signal timing.
(d)(1)At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, the walk indication and other visual signals, including, but not limited to, LPIs and countdown pedestrian signals, shall comply with the California Manual on Uniform Traffic Control Devices (CA MUTCD), 4E.11. These pedestrian signal heads shall have an APS pushbutton or touch-free APS that activates WALK and DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats, including, but not limited to, audible tones, speech messages, and vibrotactile surfaces. These features shall be activated, maintained, and available at all times of the day.
(2)(A)Touch-free APS shall be installed at new signalized pedestrian crossings on capital projects on the state highway system, defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects according to the following schedule:
(i)Capital outlay support projects that have a ready to list date.
(ii)Capital outlay support projects that are in construction before October 18, 2021.
(iii)Encroachment permit projects that have been approved on or after October 18, 2021.
(iv)Highway maintenance-funded projects that have a ready to list date on or after October 18, 2021.
(B)(i)When a touch-free APS is installed at an existing signalized pedestrian crossing, or in response to a federal Americans with Disability Act (ADA) access request, on capital projects on the state highway system, all APS at that location shall be upgraded to touch-free APS.
(ii)The installation of touch-free APS shall not require the upgrading of other ADA components, including, but not limited to, curb ramps or sidewalks, unless those components are disturbed.
(3)When performing maintenance and repair activities on capital projects on the state highway system, as defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects, the maintenance and repair shall consider using touch-free APS.
(4)Unsignalized pedestrian crossings at signalized intersections, including, but not limited to, intersections with free-right turns, may remain unsignalized.
(e)(1)Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, the traffic-actuated signal shall be installed and maintained to have an LPI and a touch-free APS, in compliance with the California Manual on Uniform Traffic Control Devices (CA MUTCD). The touch-free APS shall be activated.
(2)Caltrans shall implement LPIs on existing state-owned or -operated traffic-actuated signals capable of being implemented with remote installation or in-person programming when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the traffic-actuated signal is in any of the following areas, unless prohibited by the CA MUTCD:
(A)A residential district, as determined by Section 22507.5.
(B)A business district, as defined in Sections 235 and 240.
(C)A business activity district, as defined in Section 22358.9.
(D)A safety corridor, as defined in Section 2B.13 of the CA MUTCD.
(E)A school zone, as defined in Section 1A.13.185 of the CA MUTCD.
(F)Areas with a high concentration of pedestrians and cyclists, as defined in Section 2B.13 and Table 2B.106(CA) of the CA MUTCD.
(3)(A)As soon as practicable, all existing state-owned or -operated traffic signals located in the areas described in subparagraphs (A) to (F), inclusive, of paragraph (2) shall be identified and recorded in the Caltrans Management System (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. LPIs shall be implemented at these existing state-owned or -operated traffic signal locations at the next opportunity for regularly scheduled operational reviews. Traffic signals that have been implemented with LPIs shall be recorded in the TMS inventory database.
(B)As soon as practicable, Caltrans district signal operations units shall formally notify, in writing, local agencies operating state-owned traffic-actuated signals in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), about the opportunity to implement LPI on the signals. Additionally, these local agencies shall report their implementation of LPIs at these locations to Caltrans so the locations can be included in the TMS inventory database.
(C)For existing traffic signals not in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), Caltrans shall follow the same criteria for implementing LPIs in paragraph (2).
(4)Depending on the physical location and traffic conditions, locations where LPIs have been implemented pursuant to this subdivision may restrict turns on red using illuminated blank out signs and enhanced signing. LPIs are to be implemented at existing signals with touch-free APS and pedestrian countdown signals.
SEC. 2.If the Commission on State Mandates determines that this act contains costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
(a)A traffic-actuated signal As used in this section, the following terms have the following definitions:
(1)Accessible pedestrian signal or APS means an integrated device that communicates information about the WALK and DONT WALK intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision.
(2)Leading pedestrian interval or LPI means an official traffic control signal that advances the WALK signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.
(3)Pedestrian hybrid beacon means a special type of hybrid beacon used to warn and control traffic at an unsignalized location to assist pedestrians in crossing a street or highway at a marked crosswalk. Following an actuation by a pedestrian, a pedestrian hybrid beacon face shall display to motorists and bicyclists a flashing CIRCULAR YELLOW signal indication, followed by a steady CIRCULAR YELLOW signal indication, followed by both steady CIRCULAR RED signal indications during the pedestrian walk interval and followed by alternating flashing CIRCULAR RED signal indications during the pedestrian change interval. Upon termination of the pedestrian change interval, the pedestrian hybrid beacon faces shall revert to a dark, not illuminated, condition. When a pedestrian makes an actuation, they shall wait for a WALK signal to appear on the pedestrian head in order to proceed. After the countdown, a DONT WALK signal appears, and the pedestrian hybrid beacon has to be activated again to initiate a WALK signal.
(4)Replaced or replacement means the relocation or exchange in place of all existing signal poles at an intersection with new signal poles.
(5)A traffic-actuated signal is an official traffic control signal, as specified in Section 445, that displays one or more of its indications in response to the presence of traffic detected by mechanical, visual, electrical, or other means.
(6)Caltrans means the Department of Transportation.
(b)Upon the first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, the traffic-actuated signal shall, to the extent feasible and in conformance with professional traffic engineering practice, be installed and maintained to detect lawful bicycle or motorcycle traffic on the roadway.
(c)Cities, counties, and cities and counties shall not be required to comply with the provisions contained in subdivision (b) until the Department of Transportation, in consultation with these entities, has established uniform standards, specifications, and guidelines for the detection of bicycles and motorcycles by traffic-actuated signals and related signal timing.
(d)(1)Upon the first placement or replacement of a state-owned or operated traffic-actuated signal, a traffic-actuated signal shall be installed and maintained to have a leading pedestrian interval, and shall include the installation, activation, and maintenance of an accessible pedestrian signal and detector that complies with sections 4E.08 to 4E.13 of the California Manual on Uniform Traffic Control Devices in effect on December 31, 2022.(2)An existing state-owned or operated traffic-actuated signal capable of being implemented with remote installation or in-person programming shall have a leading pedestrian interval programmed when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the traffic-actuated signal is in any of the following areas:(A)A residential district.(B)A business district.(C)A business activity district.(D)A safety corridor.(E)A school zone.(F)An area with a high concentration of pedestrians and cyclists, as determined by the Department of Transportation pursuant to Section 22358.7.(3)The requirements in paragraphs (1) and (2) do not apply when prohibited by the California Manual on Uniform Traffic Control Devices.(4)As used in this subdivision, a leading pedestrian interval means an official traffic control signal that advances the WALK signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.(5)As used in this subdivision, an accessible pedestrian signal and detector means an integrated device that communicates information about the WALK and DONT WALK intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision.(d)(1)At crosswalks with state-owned or -operated traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads, the walk indication and other visual signals, including, but not limited to, LPIs and countdown pedestrian signals, shall comply with the California Manual on Uniform Traffic Control Devices (CA MUTCD), 4E.11. These pedestrian signal heads shall have an APS pushbutton or touch-free APS that activates WALK and DONT WALK intervals and other visual signals at signalized intersections in nonvisual formats, including, but not limited to, audible tones, speech messages, and vibrotactile surfaces. These features shall be activated, maintained, and available at all times of the day.
(2)(A)Touch-free APS shall be installed at new signalized pedestrian crossings on capital projects on the state highway system, defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects according to the following schedule:
(i)Capital outlay support projects that have a ready to list date.
(ii)Capital outlay support projects that are in construction before October 18, 2021.
(iii)Encroachment permit projects that have been approved on or after October 18, 2021.
(iv)Highway maintenance-funded projects that have a ready to list date on or after October 18, 2021.
(B)(i)When a touch-free APS is installed at an existing signalized pedestrian crossing, or in response to a federal Americans with Disability Act (ADA) access request, on capital projects on the state highway system, all APS at that location shall be upgraded to touch-free APS.
(ii)The installation of touch-free APS shall not require the upgrading of other ADA components, including, but not limited to, curb ramps or sidewalks, unless those components are disturbed.
(3)When performing maintenance and repair activities on capital projects on the state highway system, as defined in Section 300 of the Streets and Highways Code, encroachment permit projects, and highway maintenance-funded projects, the maintenance and repair shall consider using touch-free APS.
(4)Unsignalized pedestrian crossings at signalized intersections, including, but not limited to, intersections with free-right turns, may remain unsignalized.
(e)(1)Upon the first placement or replacement of a state-owned or -operated traffic-actuated signal, the traffic-actuated signal shall be installed and maintained to have an LPI and a touch-free APS, in compliance with the California Manual on Uniform Traffic Control Devices (CA MUTCD). The touch-free APS shall be activated.
(2)Caltrans shall implement LPIs on existing state-owned or -operated traffic-actuated signals capable of being implemented with remote installation or in-person programming when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the traffic-actuated signal is in any of the following areas, unless prohibited by the CA MUTCD:
(A)A residential district, as determined by Section 22507.5.
(B)A business district, as defined in Sections 235 and 240.
(C)A business activity district, as defined in Section 22358.9.
(D)A safety corridor, as defined in Section 2B.13 of the CA MUTCD.
(E)A school zone, as defined in Section 1A.13.185 of the CA MUTCD.
(F)Areas with a high concentration of pedestrians and cyclists, as defined in Section 2B.13 and Table 2B.106(CA) of the CA MUTCD.
(3)(A)As soon as practicable, all existing state-owned or -operated traffic signals located in the areas described in subparagraphs (A) to (F), inclusive, of paragraph (2) shall be identified and recorded in the Caltrans Management System (TMS) inventory database to assist future annual operational review requirements and coordination with local agencies for delegated signals. LPIs shall be implemented at these existing state-owned or -operated traffic signal locations at the next opportunity for regularly scheduled operational reviews. Traffic signals that have been implemented with LPIs shall be recorded in the TMS inventory database.
(B)As soon as practicable, Caltrans district signal operations units shall formally notify, in writing, local agencies operating state-owned traffic-actuated signals in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), about the opportunity to implement LPI on the signals. Additionally, these local agencies shall report their implementation of LPIs at these locations to Caltrans so the locations can be included in the TMS inventory database.
(C)For existing traffic signals not in areas described in subparagraphs (A) to (F), inclusive, of paragraph (2), Caltrans shall follow the same criteria for implementing LPIs in paragraph (2).
(4)Depending on the physical location and traffic conditions, locations where LPIs have been implemented pursuant to this subdivision may restrict turns on red using illuminated blank out signs and enhanced signing. LPIs are to be implemented at existing signals with touch-free APS and pedestrian countdown signals.
SEC. 2.If the Commission on State Mandates determines that this act contains costs mandated by the state, reimbursement to local agencies and school districts for those costs shall be made pursuant to Part 7 (commencing with Section 17500) of Division 4 of Title 2 of the Government Code.
CORRECTIONS: TextPage 7.|
Date
|
Status
|
|---|---|
| Oct 3, 2025 | Chaptered by Secretary of State. Chapter 326, Statutes of 2025. |
| Oct 3, 2025 | Approved by the Governor. |
| Sep 3, 2025 | Enrolled and presented to the Governor at 11 a.m. |
| Aug 28, 2025 | In Senate. Ordered to engrossing and enrolling. |
| Aug 28, 2025 | Read third time. Passed. (Ayes 74. Noes 0. Page 2776.) Ordered to the Senate. |
| Aug 21, 2025 | Read second time. Ordered to consent calendar. |
| Aug 20, 2025 | From committee: Do pass. Ordered to consent calendar. (Ayes 15. Noes 0.) (August 20). |
| Jul 15, 2025 | From committee: Do pass and re-refer to Com. on APPR. with recommendation: To consent calendar. (Ayes 16. Noes 0.) (July 14). Re-referred to Com. on APPR. |
| May 12, 2025 | Referred to Com. on TRANS. |
| Apr 24, 2025 | In Assembly. Read first time. Held at Desk. |
| Apr 24, 2025 | (Corrected April 25). |
| Apr 24, 2025 | Read third time. Passed. (Ayes 37. Noes 0. Page 887.) Ordered to the Assembly. |
| Apr 22, 2025 | Read second time. Ordered to consent calendar. |
| Apr 21, 2025 | From committee: Be ordered to second reading pursuant to Senate Rule 28.8 and ordered to consent calendar. |
| Apr 10, 2025 | Set for hearing April 21. |
| Apr 9, 2025 | From committee: Do pass and re-refer to Com. on APPR. with recommendation: To consent calendar. (Ayes 15. Noes 0. Page 711.) (April 8). Re-referred to Com. on APPR. |
| Apr 1, 2025 | Set for hearing April 8. |
| Mar 5, 2025 | Referred to Com. on TRANS. |
| Feb 21, 2025 | From printer. May be acted upon on or after March 23. |
| Feb 20, 2025 | Introduced. Read first time. To Com. on RLS. for assignment. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| Aug 28, 2025 | SB 671 Cervantes Consent Calendar Second Day Regular Session | Assembly Floor |
Passed |
|
| Aug 20, 2025 | Do pass. To Consent Calendar. | Assembly Standing Committee on Appropriations |
Passed |
|
| Jul 14, 2025 | Do pass and be re-referred to the Committee on [Appropriations] with recommendation: To Consent Calendar | Assembly Standing Committee on Transportation |
Passed |
|
| Apr 24, 2025 | Consent Calendar 2nd SB671 Cervantes | Senate Floor |
Passed |
|
| Apr 8, 2025 | Do pass, but first be re-referred to the Committee on [Appropriations] with the recommendation: To Consent Calendar | Senate Standing Committee on Transportation |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| California Council Of The Blind | ** Support | |
| California Disability Services Association | ** Support | |
| California Long Term Care Ombudsman Association | ** Support | |
| California State Council on Developmental Disabilities | ** Support | |
| County of Santa Clara | ** Support | |
| Disability Rights California | ** Support | |
| Streets for All | ** Support |
Date of Hearing: August 20, 2025
ASSEMBLY COMMITTEE ON APPROPRIATIONS
Buffy Wicks, Chair
SBPCA Bill Id:SB 671
Author:(Cervantes) – As Introduced Ver:February 20, 2025
Policy Committee: | Transportation | Vote: | 16 - 0 |
|
| ||
|
|
Urgency: No State Mandated Local Program: Yes Reimbursable: Yes
SUMMARY:
This bill requires the Department of Transportation (Caltrans) to install touch-free accessible pedestrian signals (APS) at signalized pedestrian crossings on capital projects on the state highway system, encroachment permit projects and highway maintenance-funded projects.
The bill also requires local agencies to report to Caltrans on the implementation of leading pedestrian interval (LPI) installations where those local agencies are operating state-owned signals.
FISCAL EFFECT:
Caltrans describes this bill as creating the following work for it:
- Establishing the means to track the status of LPI at delegated state-owned and locally operated signals.
- Reporting local agency progress in the Transportation Management System inventory database.
- Maintaining an inventory of new touch-free APS.
- Educating the public on use of the APS system.
While this work appears substantial, Caltrans nonetheless contends it creates minor costs that Caltrans could absorb without additional staff or funding resources. This committee, therefore, expect Caltrans will not request additional resources to implement this bill.
Costs to local agencies to report to Caltrans on the implementation of LPI installations are likely to be minimal.
COMMENTS:
- Purpose. The author notes the challenges faced by individuals with visual impairments in crossing busy intersections and intends this bill to lead to the more-widespread installation of touch-free APS, which the author describes as enabling those with vision loss to “know when they can safely cross the street by translating the warning lights into audio information.”
- Background. According to Caltrans, a touch-free APS is a device that allows a pedestrian the option to place a "call" to cross the street by either using the pedestrian push button or by waving their hand in front of the touch-free APS. On June 24, 2021, Caltrans issued Operations Policy Directive number 21-06 that calls for both of the following:
- Touch-free APS shall be installed at new signalized pedestrian crossings on the state highway system for capital projects, encroachment permit projects, and highway maintenance-funded projects.
- When a touch-free APS is installed at an existing signalized pedestrian crossing, or in response to an access request pursuant to the Americans with Disabilities Act, on the state highway system, all APS at that location shall be upgraded to touch-free APS.
This bill is consistent with the existing Caltrans policy directive. The bill is supported by Disability Rights California, which asserts:
Since the bill only requires accessible pedestrian signals to be installed under the same policies already in effect, SB 671 would not require the allocation of additional funding, nor does it cause any financial hardship on behalf of local counties or cities.
There is no opposition registered against this bill.
Analysis Prepared by: Jay Dickenson / APPR. / (916) 319-2081
Date of Hearing: July 14, 2025
ASSEMBLY COMMITTEE ON TRANSPORTATION
Lori D. Wilson, Chair
SBPCA Bill Id:SB 671
Author:(Cervantes) – As Introduced Ver:February 20, 2025
SENATE VOTE: 37-0
SUBJECT: Pedestrian crossing signals
SUMMARY: Codifies the California Department of Transportation’s (Caltrans) existing policy that requires touch-free accessible pedestrian signals (APS) to be installed at signalized pedestrian crossings on capital projects on the state highway system, encroachment permit projects, and highway maintenance-funded projects. Specifically, this bill:
- Requires Caltrans, on crosswalks with state-owned or -operated traffic-actuated signals, to install and maintain an APS pushbutton or touch-free APS on the pedestrian signal heads that activates “WALK” and “DON’T WALK” intervals and other visual signals at signalized intersections in nonvisual formats.
- Requires these features to be activated, maintained, and available at all times of the day.
- Directs Caltrans to install touch-free APS on new signalized pedestrian crossings on the state highways system and to consider installing touch-free APS when conducting maintenance and repair projects.
- Adds touch-free APS installation to the existing requirements for the installation of LPIs during the first placement of or maintenance of state-owned or operated traffic signals in specified locations.
- Requires Caltrans to catalogue existing state-owned or -operated traffic signals located in specified areas to be identified and recorded in the Caltrans Management System inventory database.
- Allows unsignalized pedestrian crossings at signalized intersections, including, but not limited to, intersections with free-right turns, to remain unsignalized.
- Creates a state-local mandate.
EXISTING LAW:
- Requires Caltrans to maintain appropriate signs, signals, and other traffic control devices on both state highways and, with the consent of local authorities, maintain city streets and county roads. (Vehicle Code Section (VEH) 21350.
- Specifies when Leading Pedestrian Intervals (LPI) must be installed, including during the first placement or replacement of a state-owned or operated traffic actuated signal and when maintenance work is done at a signalized intersection in a residential district, business district, business activity district, safety corridor, school zone, or an area with a high concentration of pedestrians and cyclists. (VEH 21450.5)
- Defines an “accessible pedestrian signal and detector” as an integrated device that communicates information about the “WALK” and “DON’T WALK” intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision. (VEH 21450.5)
- Defines a “leading pedestrian interval” as an official traffic control signal that advances the “WALK” signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic. (VEH 21450.5)
FISCAL EFFECT: Pursuant to Senate Rule 28.8, negligible state costs.
COMMENTS: An APS is an integrated device that communicates information about the “Walk” and “Don’t Walk” intervals at signalized intersections in non-visual formats like audible tones and viobractile surfaces for pedestrians who are blind or have low vision. Since 2011, the Manual on Uniform Traffic Control Devices (MUTCD) has required APS provide both audible and vibrotactile surfaces. The MUTCD provides uniform standards and specifications for all official traffic control devices in California. It is largely based on the federal MUTCD, which sets national standards to inform uniformity across the country. Non-compliance with the MUTCD can result in a loss of federal funding.
In 2020, out of fear of the COVID-19 virus, Santa Clara installed California’s first touch free APS crossing the street to Santa Clara Valley Medical Center. The APS devices were activated by waiving your hand in front of them instead of touching the device. Caltrans expedited their use as a pilot within two months.
This bill codifies Caltrans’ existing policies on the installation of APS. Caltrans initially established the requirement that touch-free APS must be installed and activated at signalized pedestrian crossings on the state highway system as a public health safety enhancement to minimize the spread of contact-related pathogens in June of 2021. The policy encompassed new signalized pedestrian crossings and all pedestrian signals in the nearby vicinity of a new installation.
According to the author. “For individuals with visual impairments, crossing busy intersections can present daunting challenges. APS enables Californians with vision loss to know when they can safely cross the street by translating the warning lights into audio information. Accessible pedestrian signals are activated by holding the push button for 3-5 seconds and providing auditory, visual, and vibrotactile cues indicating when it’s safe to cross the street. These signals empower individuals with visual impairments to navigate intersections independently, enhancing their safety and promoting greater independence in their everyday lives. This bill would codify into state law: ‘Where stated-owned or operated, traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads are provided at crosswalks, the walk indication and other visual signals, such as leading pedestrian intervals (LPIs) and countdown pedestrian signals. All pedestrian signal heads shall have an accessible pedestrian signal (APS) pushbutton or touch-free APS that activates WALK and DON’T WALK intervals and other visual signals at signalized intersections in non-visual formats, including audible tones, speech messages, and vibrotactile surfaces, complying with the California Manual on Uniform Traffic Control Devices (MUTCD), which specifies where these devices are to be located, the accessibility features they are to possess, and how they function. The accessible features that are required by the MUTCD shall be installed, activated, maintained, and available at all times of the day.’”
California Council for the Blind, the sponsor of this bill, argues “It is estimated that each day close to 1.3 million Californians with significant vision loss cross the street, more than 1 hundred thousand of which are considered legally blind. As our population ages, vision loss is becoming more and more common. Many older adults have trouble living independently because of orientation and mobility challenges. For individuals with visual impairments, crossing busy intersections can present such daunting challenges. APS enable Californians with vision loss to know when they can safely cross the street by translating the warning lights into audio information. Accessible pedestrian signals are activated by holding down the push button for 3-5 seconds, after which they provide auditory, visual, and vibrotactile cues that indicate when it’s safe to cross the street. These signals empower individuals with visual impairments to navigate intersections independently, enhance their safety and promote greater independence in their everyday lives. This bill would codify existing policies of the California Department of Transportation specifying that when a signal owned or operated by Caltrans is being repaired, replaced, or newly installed, the signal must contain an accessible pedestrian signal. Since the bill only requires accessible pedestrian signals to be installed under the same policies already in effect, SB671 would not require the allocation of additional funding, nor does it cause any financial hardship on behalf of local counties or cities.”
Previous legislation. AB 2264 (Bloom), Chapter 496, Statutes of 2022 required installation and maintenance of traffic-actuated signals with leading pedestrian intervals.
SB 672 (Fuller), Chapter 432, Statutes of 2017 extended requirement of cities and counties, upon first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, to install those signals that detect motorcycle and bicycle traffic on the roadway indefinitely.
AB 1581 (Fuller), Chapter 337, Statutes of 2007 required cities and counties, upon first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, to install those signals that detect motorcycle and bicycle traffic on the roadway, until January 1, 2018.
REGISTERED SUPPORT / OPPOSITION:
Support
California Council of the Blind
California Disability Services Association
California Long Term Care Ombudsman Association
California State Council on Developmental Disabilities
County of Santa Clara
Disability Rights California
Streets for All
Opposition
None on file
Analysis Prepared by: David Sforza / TRANS. / (916) 319-2093
SENATE RULES COMMITTEE Office of Senate Floor Analyses (916) 651-1520 Fax: (916) 327-4478 | SB 671 |
CONSENT
Bill No: SB 671
Author: Cervantes (D)
Introduced: 2/20/25
Vote: 21
SENATE TRANSPORTATION COMMITTEE: 15-0, 4/8/25
AYES: Cortese, Strickland, Archuleta, Arreguín, Blakespear, Cervantes, Dahle, Gonzalez, Grayson, Limón, Menjivar, Richardson, Seyarto, Umberg, Valladares
SENATE APPROPRIATIONS COMMITTEE: Senate Rule 28.8
SUBJECT: Pedestrian crossing signals
SOURCE: California Council for the Blind
DIGEST:
This bill requires installation and maintenance of traffic-actuated signals with touch-free Accessible Pedestrian Signals (APS) and directs the California Department of Transportation (Caltrans) to catalogue existing state-owned or operated traffic signals located in specified areas.
ANALYSIS:
Existing law:
- Requires Caltrans to maintain appropriate signs, signals, and other traffic control devices on both state highways and, with the consent of local authorities, maintain city streets and county roads.
- Specifies when Leading Pedestrian Intervals (LPI) must be installed, including during the first placement or replacement of a state-owned or operated traffic actuated signal and when maintenance work is done at a signalized intersection in a residential district, business district, business activity district, safety corridor, school zone, or an area with a high concentration of pedestrians and cyclists.
- Defines an “accessible pedestrian signal and detector” as an integrated device that communicates information about the “WALK” and “DON’T WALK” intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision. Defines a “leading pedestrian interval” as an official traffic control signal that advances the “WALK” signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.
This bill:
- Requires Caltrans, on crosswalks with state-owned or -operated traffic-actuated signals, to install and maintain an APS pushbutton or touch-free APS on the pedestrian signal heads that activates “WALK” and “DON’T WALK” intervals and other visual signals at signalized intersections in nonvisual formats.
- Requires these features to be activated, maintained, and available at all times of the day.
- Directs Caltrans to install touch-free APS on new signalized pedestrian crossings on the state highways system and to consider installing touch-free APS when conducting maintenance and repair projects.
- Adds touch-free APS installation to the existing requirements for the installation of LPIs during the first placement of or maintenance of state-owned or operated traffic signals in specified locations.
- Requires Caltrans to catalogue existing state-owned or operated traffic signals located in specified areas to be identified and recorded in the Caltrans Management System inventory database.
Comments
- Purpose of the bill. According to the author, “For individuals with visual impairments, crossing busy intersections can present daunting challenges. APS enables Californians with vision loss to know when they can safely cross the street by translating the warning lights into audio information. Accessible pedestrian signals are activated by holding the push button for 3-5 seconds and providing auditory, visual, and vibrotactile cues indicating when it’s safe to cross the street. These signals empower individuals with visual impairments to navigate intersections independently, enhancing their safety and promoting greater independence in their everyday lives. This bill would codify into state law: ‘Where stated-owned or operated, traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads are provided at crosswalks, the walk indication and other visual signals, such as leading pedestrian intervals (LPIs) and countdown pedestrian signals. All pedestrian signal heads shall have an accessible pedestrian signal (APS) pushbutton or touch-free APS that activates WALK and DON’T WALK intervals and other visual signals at signalized intersections in non-visual formats, including audible tones, speech messages, and vibrotactile surfaces, complying with the California Manual on Uniform Traffic Control Devices (MUTCD), which specifies where these devices are to be located, the accessibility features they are to possess, and how they function. The accessible features that are required by the MUTCD shall be installed, activated, maintained, and available at all times of the day.’”
- Caltrans is working on it. This bill codifies Caltrans’ existing policies on the installation of LPI and APS. Caltrans initially established the requirement that touch-free APS must be installed and activated at signalized pedestrian crossings on the state highway system as a public health safety enhancement to minimize the spread of contact-related pathogens in June of 2021. The policy encompassed new signalized pedestrian crossings and all pedestrian signals in the nearby vicinity of a new installation.
The following year the Legislature passed AB 2264 (Bloom, Chapter 496, Statutes of 2022), which mandated the installation of LPIs when state-owned or operated traffic-actuated signals are installed or replaced. It also required LPIs to be installed when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the signal is in a residence, business, or business activity district, a safety corridor, or an area with a high concentration of pedestrians and cyclists. Caltrans’ guidance for the implementation of AB 2264 directed the Caltrans to implement active accessible pedestrian signals and touch-free detectors during the work to install the LPIs.
Then, in February of 2024, Caltrans issued Traffic Operations Policy Directive 24-01, which provides comprehensive direction to the department to broadly install touch-free APS and LPIs at signalized intersections across the state highway system. This bill pulls its language directly from that memo, seeking to codify Caltrans existing policy. Because the provisions of the bill mirror Caltrans’ current policy, it is reasonable to assume that the bill would not create significant new obligations for Caltrans and that it is aligned with the department’s determined best practices for traffic signals.
- Leading Pedestrian Intervals. An LPI is a signal-timing tool that can reduce vehicle-pedestrian crashes. At signalized intersections, LPIs give pedestrians the opportunity to enter an intersection 3 to 7 seconds before vehicles are given a green indication. With this head start, pedestrians can better establish their presence in the crosswalk before vehicles proceed to make their turn. LPI provides the benefits of increased visibility of crossing pedestrians, reduced conflicts between pedestrians and vehicles, and increased likelihood of motorists yielding to pedestrians. LPI have been installed across the country, providing an ample amount of data to demonstrate its effectiveness. A study from State College, Pennsylvania, conducted over a period of three years, found a reduction in pedestrian-vehicle crashes of 46%. A U.S. Department of Federal Highway Administration review of studies from Chicago, Illinois, New York City, New York, and Charlotte North Carolina with over 100 treated intersection found 13% reduction in total pedestrian-vehicle crashes for all cities combined. Finally, a study in Austin, Texas surveyed residents and found that 87% of those surveyed expressed feeling safer crossing the street when an LPI was installed.
- Accessible Pedestrian Signals. An APS is a device that communicates information about the “WALK” and “DON'T WALK” intervals at signalized intersections in non-visual formats (i.e., audible tones and vibrotactile surfaces) to pedestrians who are blind or have low vision. Touch-free APS allows the pedestrian the option to place a "call" to cross the street by either using the pedestrian push button or by waving their hand in front of the touch-free APS. APS can provide information to pedestrian, including:
- Existence of and location of the pushbutton;
- Beginning of the WALK interval;
- Direction of the crosswalk and location of the destination curb;
- Intersection street names in Braille, raised print, or through speech messages;
- Intersection signalization with a speech message; and,
- Intersection geometry through tactile maps and diagrams, or through speech messages.
Related/Prior Legislation
AB 2264 (Bloom, Chapter 496, Statutes of 2022). Required installation and maintenance of traffic-actuated signals with leading pedestrian intervals.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: Yes
SUPPORT: (Verified 04/22/25)
California Council of The Blind (Source)
California Long Term Care Ombudsman Association
Disability Rights California
California State Council on Developmental Disabilities
Streets for All
OPPOSITION: (Verified 04/22/25)
Prepared by: Isabelle LaSalle / TRANS. / (916) 651-4121
4/23/25 16:26:38
**** END ****
SENATE COMMITTEE ON TRANSPORTATION
Senator Dave Cortese, Chair
2025 - 2026 Regular
Bill No: Hearing Date: 04/08/2025
Author: | Cervantes | ||
Version: | 2/20/2025 Introduced | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | Isabelle LaSalle | ||
SUBJECT:
DIGEST: This bill requires installation and maintenance of traffic-actuated signals with touch-free Accessible Pedestrian Signals (APS) and directs the California Department of Transportation (Caltrans) to catalogue existing state-owned or -operated traffic signals located in specified areas.
ANALYSIS:
Existing law:
- Requires Caltrans to maintain appropriate signs, signals, and other traffic control devices on both state highways and, with the consent of local authorities, maintain city streets and county roads.
- Specifies when Leading Pedestrian Intervals (LPI) must be installed, including during the first placement or replacement of a state-owned or operated traffic actuated signal and when maintenance work is done at a signalized intersection in a residential district, business district, business activity district, safety corridor, school zone, or an area with a high concentration of pedestrians and cyclists.
- Defines an “accessible pedestrian signal and detector” as an integrated device that communicates information about the “WALK” and “DON’T WALK” intervals at signalized intersections in nonvisual formats, including audible tones, speech messages, and vibrotactile surfaces, to pedestrians who are blind or have low vision.
- Defines a “leading pedestrian interval” as an official traffic control signal that advances the “WALK” signal for three to seven seconds while the red signal halting traffic continues to be displayed on parallel through or turning traffic.
This bill:
- Requires Caltrans, on crosswalks with state-owned or -operated traffic-actuated signals, to install and maintain an APS pushbutton or touch-free APS on the pedestrian signal heads that activates “WALK” and “DON’T WALK” intervals and other visual signals at signalized intersections in nonvisual formats.
- Requires these features to be activated, maintained, and available at all times of the day.
- Directs Caltrans to install touch-free APS on new signalized pedestrian crossings on the state highways system and to consider installing touch-free APS when conducting maintenance and repair projects.
- Adds touch-free APS installation to the existing requirements for the installation of LPIs during the first placement of or maintenance of state-owned or operated traffic signals in specified locations.
- Requires Caltrans to catalogue existing state-owned or -operated traffic signals located in specified areas to be identified and recorded in the Caltrans Management System inventory database.
COMMENTS:
- Purpose of the bill. According to the author, “For individuals with visual impairments, crossing busy intersections can present daunting challenges. APS enables Californians with vision loss to know when they can safely cross the street by translating the warning lights into audio information. Accessible pedestrian signals are activated by holding the push button for 3-5 seconds and providing auditory, visual, and vibrotactile cues indicating when it’s safe to cross the street. These signals empower individuals with visual impairments to navigate intersections independently, enhancing their safety and promoting greater independence in their everyday lives. This bill would codify into state law: ‘Where stated-owned or operated, traffic-actuated signals and pedestrian hybrid beacons with pedestrian signal heads are provided at crosswalks, the walk indication and other visual signals, such as leading pedestrian intervals (LPIs) and countdown pedestrian signals. All pedestrian signal heads shall have an accessible pedestrian signal (APS) pushbutton or touch-free APS that activates WALK and DON’T WALK intervals and other visual signals at signalized intersections in non-visual formats, including audible tones, speech messages, and vibrotactile surfaces, complying with the California Manual on Uniform Traffic Control Devices (MUTCD), which specifies where these devices are to be located, the accessibility features they are to possess, and how they function. The accessible features that are required by the MUTCD shall be installed, activated, maintained, and available at all times of the day.’”
- Caltrans is working on it. This bill codifies Caltrans’ existing policies on the installation of LPI and APS. Caltrans initially established the requirement that touch-free APS must be installed and activated at signalized pedestrian crossings on the state highway system as a public health safety enhancement to minimize the spread of contact-related pathogens in June of 2021. The policy encompassed new signalized pedestrian crossings and all pedestrian signals in the nearby vicinity of a new installation.
The following year the Legislature passed AB 2264 (Bloom, Chapter 496, Statutes of 2022), which mandated the installation of LPIs when state-owned or operated traffic-actuated signals are installed or replaced. It also required LPIs to be installed when maintenance work is done on the intersection in which the traffic-actuated signal is located, if the signal is in a residence, business, or business activity district, a safety corridor, or an area with a high concentration of pedestrians and cyclists. Caltrans’ guidance for the implementation of AB 2264 directed the Caltrans to implement active accessible pedestrian signals and touch-free detectors during the work to install the LPIs.
Then, in February of 2024 Caltrans issued Traffic Operations Policy Directive 24-01, which provides comprehensive direction to the department to broadly install touch-free APS and LPIs at signalized intersections across the state highway system. This bill pulls its language directly from that memo, seeking to codify Caltrans existing policy. Because the provisions of the bill mirror Caltrans’ current policy, it is reasonable to assume that the bill would not create significant new obligations for Caltrans and that it is aligned with the department’s determined best practices for traffic signals.
- Leading Pedestrian Intervals. An LPI is a signal-timing tool that can reduce vehicle-pedestrian crashes. At signalized intersections, LPIs give pedestrians the opportunity to enter an intersection 3 to 7 seconds before vehicles are given a green indication. With this head start, pedestrians can better establish their presence in the crosswalk before vehicles proceed to make their turn. LPI provides the benefits of increased visibility of crossing pedestrians, reduced conflicts between pedestrians and vehicles, and increased likelihood of motorists yielding to pedestrians. LPI have been installed across the country, providing an ample amount of data to demonstrate its effectiveness. A study from State College, Pennsylvania, conducted over a period of three years, found a reduction in pedestrian-vehicle crashes of 46%. A U.S. Department of Federal Highway Administration review of studies from Chicago, Illinois, New York City, New York, and Charlotte North Carolina with over 100 treated intersection found 13% reduction in total pedestrian-vehicle crashes for all cities combined. Finally, a study in Austin, Texas surveyed residents and found that 87% of those surveyed expressed feeling safer crossing the street when an LPI was installed.
- Accessible Pedestrian Signals. An APS is a device that communicates information about the “WALK” and “DON'T WALK” intervals at signalized intersections in non-visual formats (i.e., audible tones and vibrotactile surfaces) to pedestrians who are blind or have low vision. Touch-free APS allows the pedestrian the option to place a "call" to cross the street by either using the pedestrian push button or by waving their hand in front of the touch-free APS. APS can provide information to pedestrian, including:
- Existence of and location of the pushbutton;
- Beginning of the WALK interval;
- Direction of the crosswalk and location of the destination curb;
- Intersection street names in Braille, raised print, or through speech messages;
- Intersection signalization with a speech message; and,
- Intersection geometry through tactile maps and diagrams, or through speech messages.
- Support. Writing in support, California Council for the Blind states, “It is estimated that each day close to 1.3 million Californians with significant vision loss cross the street, more than 1 hundred thousand of which are considered legally blind. As our population ages, vision loss is becoming more and more common. Many older adults have trouble living independently because of orientation and mobility challenges. For individuals with visual impairments, crossing busy intersections can present such daunting challenges. APS enable Californians with vision loss to know when they can safely cross the street by translating the warning lights into audio information. Accessible pedestrian signals are activated by holding down the push button for 3-5 seconds, after which they provide auditory, visual, and vibrotactile cues that indicate when it’s safe to cross the street. These signals empower individuals with visual impairments to navigate intersections independently, enhance their safety and promote greater independence in their everyday lives. This bill would codify existing policies of the California Department of Transportation specifying that when a signal owned or operated by Caltrans is being repaired, replaced, or newly installed, the signal must contain an accessible pedestrian signal. Since the bill only requires accessible pedestrian signals to be installed under the same policies already in effect, SB671 would not require the allocation of additional funding, nor does it cause any financial hardship on behalf of local counties or cities.”
Related/previous Legislation:
AB 2264 (Bloom, Chapter 496, Statutes of 2022) required installation and maintenance of traffic-actuated signals with leading pedestrian intervals.
SB 672 (Fuller, Chapter 432, Statutes of 2017) extended requirement of cities and counties, upon first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, to install those signals that detect motorcycle and bicycle traffic on the roadway indefinitely.
AB 1581 (Fuller, Chapter 337, Statutes of 2007) required cities and counties, upon first placement of a traffic-actuated signal or replacement of the loop detector of a traffic-actuated signal, to install those signals that detect motorcycle and bicycle traffic on the roadway, until January 1, 2018.
FISCAL EFFECT: Appropriation: No Fiscal Com.: Yes Local: Yes
POSITIONS: (Communicated to the committee before noon on Wednesday, April 2, 2025.)
SUPPORT:
California Council of The Blind (Sponsor)
Disability Rights California
Streets for All
OPPOSITION:
None received.
-- END --
Bill Author
Bill Co-Author(s):