SB 455: Electric bicycles.
- Session Year: 2025-2026
- House: Senate
- Latest Version Date: 2025-04-21
Current Status:
Failed
(2026-02-02: Returned to Secretary of Senate pursuant to Joint Rule 56.)
Introduced
In Committee
Awaiting First Chamber Vote
Passed First Chamber
In Committee
Awaiting Second Chamber Vote
Passed Second Chamber
Enacted
Existing law governs the operation of motor vehicles and other devices, including, among other things, motor-driven cycles and motorized bicycles or mopeds. A violation of the Vehicle Code is a crime.
This bill would revise the definitions of the above-described devices and refer to motorized bicycles as mopeds or low-power mopeds, as specified. The bill would, commencing July 1, 2026, require manufacturers and distributors of low-power mopeds to apply an etching, an engraving, or a label that is permanently affixed to each low-power moped that contains, among other things, a statement that the device is a low-power moped and not an electric bicycle. The bill would set forth provisions governing the operation of low-power mopeds, including, among other things, licensing and helmet requirements. The bill would exempt low-power mopeds from being classified as motor vehicles, thereby exempting these devices from specified financial responsibility, registration, and license plate requirements. The bill would authorize a local authority to regulate the parking and operation of low-power mopeds on local streets and highways, as specified. Because a violation of these provisions would be a crime, the bill would impose a state-mandated local program.
Existing law defines an electric bicycle as a bicycle equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power, and requires electric bicycles to comply with specified equipment and manufacturing requirements. Existing law also governs the operation of electric bicycles and requires manufacturers and distributors of electric bicycles to apply a label that is permanently affixed to each electric bicycle that contains, among other things, the classification number of the electric bicycle, as specified. Existing law prohibits specified vehicles from being advertised, sold, offered for sale, or labeled as electric bicycles, including a vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone or to have motor power of more than 750 watts. Existing law prohibits the sale of a product or device that can modify the speed capability of an electric bicycle such that it no longer meets the definition of an electric bicycle. A violation of the Vehicle Code is a crime.
This bill would, commencing July 1, 2026, revise the labeling requirements described above to require manufacturers and distributors to apply an etching, an engraving, or label that is permanently affixed skyward on the frame of the to each electric bicycle and that contains additional information, including the brand name and manufacturer or distributor of the electric bicycle. The bill would revise the above-described list of vehicles prohibited from being advertised, sold, offered for sale, or labeled as electric bicycles, as specified, and include on the list, among other things, a vehicle that is capable of providing assistance when the bicycle reaches a speed exceeding 28 miles per hour. The bill would require any incident report filed by a peace officer for an injury or crash involving an electric bicycle to include all of the information provided in the etching, engraving, or label described above or to indicate that a marking was not available. The bill would, commencing January 1, 2026, require any product or device sold in the previous 5 years as an electric bicycle that no longer meets the definition of electric bicycle as of January 1, 2026, to be subject to a written customer notification by the retailer or manufacturer that includes among other things, notification that the product or device no longer meets the definition of an electric bicycle under state law. Because the bill would impose new requirements for electric bicycles, the violation of which would be a crime, the bill would impose a state-mandated local program.
The bill would also prohibit 2-wheeled or 3-wheeled devices from operating on any highway or public right-of-way unless the device meets the definition of a device that is explicitly defined in, and authorized for use on a highway or public right-of-way by, the Vehicle Code. The bill would authorize 2-wheeled or 3-wheeled devices that do not meet the above requirements to only be operated on private property or in off-highway environments, as specified. Because a violation of these provisions would be a crime, the bill would impose a state-mandated local program.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law defines an electric bicycle as a bicycle equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power, and requires electric bicycles to comply with specified equipment and manufacturing requirements. Existing law requires manufacturers and distributors of electric bicycles to apply a label that is permanently affixed to each electric bicycle that contains, among other things, the classification number of the electric bicycle, as specified. Existing law prohibits specified vehicles from being advertised, sold, offered for sale, or labeled as electric bicycles, including a vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone or to have motor power of more than 750 watts. Existing law prohibits the sale of a product or device that can modify the speed capability of an electric bicycle such that it no longer meets the definition of an electric bicycle. A violation of the Vehicle Code is a crime.
This bill would, commencing July 1, 2026, revise the labeling requirements described above to require manufacturers and distributors to apply an etching, engraving, or label that is permanently affixed skyward on the frame of the electric bicycle and contains additional information, including the brand name and manufacturer or distributor of the electric bicycle. The bill would revise the above-described list of vehicles prohibited from being advertised, sold, offered for sale, or labeled as electric bicycles, as specified, and include on the list, among other things, a vehicle that is capable of providing assistance when the bicycle reaches a speed exceeding 28 miles per hour. The bill would require any incident report filed by a peace officer for an injury or crash involving an electric bicycle to include all of the information provided in the etching, engraving, or label described above or to indicate that a marking was not available. The bill would, commencing January 1, 2026, require any product or device sold in the previous 5 years as an electric bicycle that no longer meets the definition of electric bicycle as of January 1, 2026, to be subject to a written customer notification by the retailer or manufacturer that includes among other things, notification that the product or device no longer meets the definition of an electric bicycle under state law. Because the bill would impose new requirements for electric bicycles, the violation of which would be a crime, the bill would impose a state-mandated local program.
The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
This bill would provide that no reimbursement is required by this act for a specified reason.
Existing law defines and regulates the use of an electric bicycle, motorcycle, motor-driven cycle, motorized bicycle or moped, and motorized quadricycle or tricycle. A violation of the provisions regulating the use of these devices is generally an infraction, unless otherwise provided.This bill would state the intent of the Legislature to enact legislation relating to electric motorcycles and electric bicycles.Existing law defines and regulates the use of an electric bicycle, motorcycle, motor-driven cycle, motorized bicycle or moped, and motorized quadricycle or tricycle. A violation of the provisions regulating the use of these devices is generally an infraction, unless otherwise provided.
This bill would state the intent of the Legislature to enact legislation relating to electric motorcycles and electric bicycles.
(a)An electric bicycle is a bicycle equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power.
(1)A class 1 electric bicycle, or low-speed pedal-assisted electric bicycle, is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, except as provided in paragraph (4), that ceases to provide assistance when the bicycle reaches the speed of 20 miles per hour, and that is not capable of providing assistance to reach speeds greater than 20 miles per hour.
(2)A class 2 electric bicycle, or low-speed throttle-assisted electric bicycle, is a bicycle equipped with a motor that may be used exclusively to propel the bicycle, and that is not capable of providing assistance when the bicycle reaches the speed of 20 miles per hour.
(3)A class 3 electric bicycle, or speed pedal-assisted electric bicycle, is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, except as provided in paragraph (4), and that ceases to provide assistance when the bicycle reaches the speed of 28 miles per hour, and equipped with a speedometer.
(4)A class 1 or class 3 electric bicycle may have start assistance or a walk mode that propels the electric bicycle on motor power alone, up to a maximum speed of 3.7 miles per hour.
(b)A person riding an electric bicycle, as defined in this section, is subject to Article 4 (commencing with Section 21200) of Chapter 1 of Division 11.
(c)(1)On and after January 1, 2017, and until July 1, 2026, manufacturers and distributors of electric bicycles shall apply a label that is permanently affixed, in a prominent location, to each electric bicycle. The label shall contain the classification number, top assisted speed, and motor wattage of the electric bicycle, and shall be printed in Arial font in at least 9-point type.
(2)On and after July 1, 2026, manufacturers and distributors of electric bicycles shall apply an etching, an engraving, or a label that is permanently affixed to each electric bicycle. The marking shall be positioned skyward on the frame and contain the brand name, manufacturer or distributor, classification number, top assisted speed, and motor wattage of the electric bicycle, and shall be printed in Arial font in at least 9-point type.
(d)The following vehicles are not electric bicycles under this code and shall not be advertised, sold, offered for sale, or labeled as electric bicycles:
(1)A vehicle with motor power of more than 750 watts.
(2)A vehicle with no more than three wheels powered by an electric motor that is intended by the manufacturer to be modifiable to attain a speed greater than 20 miles per hour on motor power alone.
(3)A vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone.
(4)A vehicle that is modified to have its operable pedals removed.
(5)A vehicle that is capable of providing assistance when the vehicle reaches a speed exceeding 28 miles per hour.
(6)A vehicle that meets the definitions of Sections Section 400, 405, or 406. 406, or 406.5.
SEC. 2.Section 405 of the Vehicle Code is amended to read:405.(a)A motor-driven cycle is any motorcycle with a motor that displaces less than 150 cubic centimeters. A motor-driven cycle does not include a motorized bicycle, as defined in Section 406. meets either of the following requirements:
(1)Gas powered and displaces less than 150 cubic centimeters.
(2)Electric powered with a maximum output of less than 10,000 watts and is capable of reaching speeds greater than 40 miles per hour.
(b)A motor-driven cycle may have pedals.
(c)A motor-driven cycle does not include a moped, as defined in Section 406, or a low-power moped, as defined in Section 406.5.
SEC. 3.Section 406 of the Vehicle Code is amended to read:406.(a)A motorized bicycle or moped is a two-wheeled or three-wheeled device having fully operative pedals for propulsion by human power, or having no pedals if powered solely by electrical energy, and an automatic transmission and a motor that produces less than 4 gross brake horsepower and is device, with or without operative pedals, that has an automatic transmission and a motor capable of propelling the device at a maximum speed of not more than 30 miles per hour on level ground. ground that meets either of the following requirements:
(1)The motor is gas powered and produces greater than 3 gross brake horsepower, but less than 4 gross brake horsepower.
(2)The motor is electrically powered with a potential output of greater than 2,250 watts, but less than 3,000 watts.
(b)Every manufacturer of a motorized bicycle or moped, as defined in this section, shall provide a disclosure to buyers that advises buyers that their existing insurance policies may not provide coverage for these bicycles and that they should contact their insurance company or insurance agent to determine if coverage is provided. The disclosure shall meet both of the following requirements:
(1)The disclosure shall be printed in not less than 14-point boldface type on a single sheet of paper that contains no information other than the disclosure.
(2)The disclosure shall include the following language in capital letters:
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS BICYCLE. TO DETERMINE IF COVERAGE IS PROVIDED YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.
(c)Any reference in this code to motorized bicycle shall be deemed to refer to a moped, as defined in this section, unless the device being referenced meets the definition of a low-powered moped, as defined in Section 406.5, in which case the reference to motorized bicycle shall be deemed to refer to a low-power moped.
SEC. 4.Section 406.5 is added to the Vehicle Code, to read:406.5.(a)A low-power moped is a two-wheeled or three-wheeled device, with or without operative pedals, and has a motor capable of propelling the device at a maximum speed of not more than 30 miles per hour on level ground and meets either of the following requirements:
(1)The motor is gas powered and produces less than 3 gross brake horsepower.
(2)The motor is electrically powered with a potential output of 2,250 watts or less.
(b)On and after July 1, 2026, manufacturers and distributors of low-power mopeds shall apply an etching, an engraving, or a label that is permanently affixed to each low-power moped. The marking shall be positioned skyward on the frame and contain the brand name, manufacturer or distributor, top assisted speed, motor wattage, and the line this is a low-power moped, not an electric bicycle, and shall be printed in Arial font in at least 9-point type.
(c)A low-power moped does not include an electric bicycle, as defined in Section 312.5.
SEC. 2.SEC. 5.Section 21065 is added to the Vehicle Code, to read:21065.Any incident report filed by a peace officer for an injury or crash involving an electric bicycle shall include all of the information provided on the marking described in subdivision (c) of Section 312.5. If the electric bicycle does not have the marking, the incident report shall indicate that a marking was not available.
SEC. 6.Article 5.4 (commencing with Section 21240) is added to Chapter 1 of Division 11 of the Vehicle Code, to read:5.4.Operation of Low-Power Mopeds21240.A person shall meet the following requirements to operate a low-power moped:
(a)If under 18 years of age, the person possesses a valid class M1 or M2 license.
(b)If 18 years of age or older, the person possesses a valid drivers license of any class.
21241.Every person operating a low-power moped upon a highway has all the rights and is subject to all the provisions applicable to the driver of a vehicle by this division, including, but not limited to, provisions concerning driving under the influence of alcoholic beverages or drugs, and by Division 10 (commencing with Section 20000), Division 17 (commencing with Section 40000.1), and Division 18 (commencing with Section 42000), except those provisions that, by their very nature, can have no application.
21242.A person operating a low-power moped is not subject to the provisions of this code relating to financial responsibility, registration, and license plate requirements, and, for those purposes, a low-power moped is not a motor vehicle.
21243.This article does not prevent a local authority, by ordinance, from regulating the parking and operation of low-power mopeds on local streets and highways if that regulation is not in conflict with this code.
21244.(a)A person shall only operate a low-power moped upon a highway subject to the following requirements:
(1)The posted speed limit is 35 miles per hour or less.
(2)The low-speed moped is capable of sustaining a speed that is within five miles of the posted speed limit.
(b)A low-power moped shall not be operated on sidewalks, paths, trails, or Class I, Class II, or Class IV bikeways.
21245.Any person operating a low-power moped upon a highway shall ride as close as practicable to the right-hand curb or right edge of the roadway, except under the following situations:
(a)When preparing for, and taking, a left turn.
(b)When preparing for, and taking, a U-turn.
21246.The operator of a low-power moped shall not operate a low-power moped without wearing a properly fitted and fastened bicycle helmet that meets the standards described in Section 21212.
SEC. 7.Article 9 (commencing with Section 21310) is added to Chapter 1 of Division 11 of the Vehicle Code, to read:9.Unauthorized Devices21310.(a)Notwithstanding any other law, a two-wheeled or three-wheeled device shall not operate on any highway or public right-of-way unless the device meets a definition of a device that is explicitly defined in Division 1 (commencing with Section 100) and is explicitly authorized for use on a highway or public right-of-way pursuant to this code.
(b)A two-wheeled or three-wheeled device that does not meet the requirements described in subdivision (a) shall only be operated on private property or in off-highway environments, subject to all relevant local, state, and federal laws.
SEC. 3.SEC. 8.Section 24016 of the Vehicle Code is amended to read:24016.(a)An electric bicycle described in subdivision (a) of Section 312.5 shall meet the following criteria:
(1)Comply with the equipment and manufacturing requirements for bicycles adopted by the United States Consumer Product Safety Commission (16 C.F.R. 1512.1, et seq.).
(2)Operate in a manner so that the electric motor is disengaged or ceases to function when the brakes are applied, or operate in a manner such that the motor is engaged through a switch or mechanism that, when released or activated, will cause the electric motor to disengage or cease to function.
(b)A person operating an electric bicycle is not subject to the provisions of this code relating to financial responsibility, drivers licenses, registration, and license plate requirements, and an electric bicycle is not a motor vehicle.
(c)Every manufacturer of an electric bicycle shall certify that it complies with the equipment and manufacturing requirements for bicycles adopted by the United States Consumer Product Safety Commission (16 C.F.R. 1512.1, et seq.).
(d)A person shall not tamper with or modify an electric bicycle described in subdivision (a) of Section 312.5 so as to change the speed capability of the bicycle, unless the bicycle continues to meet the definition of an electric bicycle under subdivision (a) of Section 312.5 and the person appropriately replaces the label indicating the classification required in subdivision (c) of Section 312.5.
(e)A person shall not sell a product or device that can modify the speed capability of an electric bicycle such that it no longer meets the definition of an electric bicycle under subdivision (a) of Section 312.5.
(f)Commencing January 1, 2026, any product or device sold in the previous five years as an electric bicycle that no longer meets the definition of electric bicycle pursuant to Section 312.5 as of January 1, 2026, shall be subject to customer notification by the retailer or manufacturer of that product. The retailer or manufacturer shall provide written notification to affected customers, including by email, that the product or device no longer meets the definition of an electric bicycle under state law. If the product meets the current definition of another type of device under this code, the notice shall include that information and inform the customer that they may be required to meet additional legal requirements, including, but not limited to, registration and licensing.
SEC. 4.SEC. 9.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
(a)An electric bicycle is a bicycle equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power.
(1)A class 1 electric bicycle, or low-speed pedal-assisted electric bicycle, is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, except as provided in paragraph (4), that ceases to provide assistance when the bicycle reaches the speed of 20 miles per hour, and that is not capable of providing assistance to reach speeds greater than 20 miles per hour.
(2)A class 2 electric bicycle, or low-speed throttle-assisted electric bicycle, is a bicycle equipped with a motor that may be used exclusively to propel the bicycle, and that is not capable of providing assistance when the bicycle reaches the speed of 20 miles per hour.
(3)A class 3 electric bicycle, or speed pedal-assisted electric bicycle, is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, except as provided in paragraph (4), and that ceases to provide assistance when the bicycle reaches the speed of 28 miles per hour, and equipped with a speedometer.
(4)A class 1 or class 3 electric bicycle may have start assistance or a walk mode that propels the electric bicycle on motor power alone, up to a maximum speed of 3.7 miles per hour.
(b)A person riding an electric bicycle, as defined in this section, is subject to Article 4 (commencing with Section 21200) of Chapter 1 of Division 11.
(c)(1)On and after January 1, 2017, and until July 1, 2026, manufacturers and distributors of electric bicycles shall apply a label that is permanently affixed, in a prominent location, to each electric bicycle. The label shall contain the classification number, top assisted speed, and motor wattage of the electric bicycle, and shall be printed in Arial font in at least 9-point type.
(2)On and after July 1, 2026, manufacturers and distributors of electric bicycles shall apply an etching, engraving, or a label that is permanently affixed to each electric bicycle. The marking shall be positioned skyward on the frame and contain the brand name, manufacturer or distributor, classification number, top assisted speed, and motor wattage of the electric bicycle, and shall be printed in Arial font in at least 9-point type.
(d)The following vehicles are not electric bicycles under this code and shall not be advertised, sold, offered for sale, or labeled as electric bicycles:
(1)A vehicle with motor power of more than 750 watts.
(1)(2)A vehicle with two or no more than three wheels powered by an electric motor that is intended by the manufacturer to be modifiable to attain a speed greater than 20 miles per hour on motor power alone or to attain more than 750 watts of power. alone.
(2)(3)A vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone or to have motor power of more than 750 watts. alone.
(3)(4)A vehicle that is modified to have its operable pedals removed.
(5)A vehicle that is capable of providing assistance when the vehicle reaches a speed exceeding 28 miles per hour.
(6)A vehicle that meets the definitions of Sections 400, 405, or 406.
SEC. 2.Section 21065 is added to the Vehicle Code, to read:21065.Any incident report filed by a peace officer for an injury or crash involving an electric bicycle shall include all of the information provided on the marking described in subdivision (c) of Section 312.5. If the electric bicycle does not have the marking, the incident report shall indicate that a marking was not available.
SEC. 3.Section 24016 of the Vehicle Code is amended to read:24016.(a)An electric bicycle described in subdivision (a) of Section 312.5 shall meet the following criteria:
(1)Comply with the equipment and manufacturing requirements for bicycles adopted by the United States Consumer Product Safety Commission (16 C.F.R. 1512.1, et seq.).
(2)Operate in a manner so that the electric motor is disengaged or ceases to function when the brakes are applied, or operate in a manner such that the motor is engaged through a switch or mechanism that, when released or activated, will cause the electric motor to disengage or cease to function.
(b)A person operating an electric bicycle is not subject to the provisions of this code relating to financial responsibility, drivers licenses, registration, and license plate requirements, and an electric bicycle is not a motor vehicle.
(c)Every manufacturer of an electric bicycle shall certify that it complies with the equipment and manufacturing requirements for bicycles adopted by the United States Consumer Product Safety Commission (16 C.F.R. 1512.1, et seq.).
(d)A person shall not tamper with or modify an electric bicycle described in subdivision (a) of Section 312.5 so as to change the speed capability of the bicycle, unless the bicycle continues to meet the definition of an electric bicycle under subdivision (a) of Section 312.5 and the person appropriately replaces the label indicating the classification required in subdivision (c) of Section 312.5.
(e)A person shall not sell a product or device that can modify the speed capability of an electric bicycle such that it no longer meets the definition of an electric bicycle under subdivision (a) of Section 312.5.
(f)Commencing January 1, 2026, any product or device sold in the previous five years as an electric bicycle that no longer meets the definition of electric bicycle pursuant to Section 312.5 as of January 1, 2026, shall be subject to customer notification by the retailer or manufacturer of that product. The retailer or manufacturer shall provide written notification to affected customers, including by email, that the product or device no longer meets the definition of an electric bicycle under state law. If the product meets the current definition of another type of device under this code, the notice shall include that information and inform the customer that they may be required to meet additional legal requirements, including, but not limited to, registration and licensing.
SEC. 4.No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
SECTION 1.It is the intent of the Legislature to enact legislation relating to electric motorcycles and electric bicycles.It is the intent of the Legislature to enact legislation relating to electric motorcycles and electric bicycles.
|
Date
|
Status
|
|---|---|
| Feb 2, 2026 | Returned to Secretary of Senate pursuant to Joint Rule 56. |
| May 23, 2025 | May 23 hearing: Held in committee and under submission. |
| May 16, 2025 | Set for hearing May 23. |
| May 12, 2025 | May 12 hearing: Placed on APPR. suspense file. |
| May 2, 2025 | Set for hearing May 12. |
| Apr 29, 2025 | From committee: Do pass and re-refer to Com. on APPR. (Ayes 15. Noes 0. Page 919.) (April 28). Re-referred to Com. on APPR. |
| Apr 21, 2025 | From committee with author's amendments. Read second time and amended. Re-referred to Com. on TRANS. |
| Apr 10, 2025 | Set for hearing April 28. |
| Apr 2, 2025 | Re-referred to Com. on TRANS. |
| Mar 25, 2025 | From committee with author's amendments. Read second time and amended. Re-referred to Com. on RLS. |
| Feb 26, 2025 | Referred to Com. on RLS. |
| Feb 20, 2025 | From printer. May be acted upon on or after March 22. |
| Feb 19, 2025 | Introduced. Read first time. To Com. on RLS. for assignment. To print. |
|
Date
|
Description
|
Location
|
Votes
|
|
|---|---|---|---|---|
| May 12, 2025 | Placed on suspense file | Senate Standing Committee on Appropriations |
Passed |
|
| Apr 28, 2025 | Do pass, but first be re-referred to the Committee on [Appropriations] | Senate Standing Committee on Transportation |
Passed |
This list shows positions taken on this bill by organizations on the date displayed, which is linked to the original source.
Positions by individuals are not included.
|
Organization
|
Position
|
Date
|
|---|---|---|
| Active San Gabriel Valley | ** Support | |
| Bike Culver City | ** Support | |
| Bike East Bay | ** Support | |
| Bike Long Beach | ** Support | |
| California Orthopedic Association | ** Support | |
| Car-Lite Long Beach | ** Support | |
| Circulate San Diego | ** Support | |
| Costa Mesa Alliance for Better Streets | ** Support | |
| E-BikeAccess.org | ** Support | |
| East Bay for Everyone | ** Support | |
| Everybody's Long Beach | ** Support | |
| Families for Safe Streets San Diego | ** Support | |
| Glendale Yimby | ** Support | |
| Long Beach Bike Co-op | ** Support | |
| Los Angeles Walks | ** Support | |
| Napa County Bicycle Coalition | ** Support | |
| Norwalk Unides | ** Support | |
| Remake Irvine Streets for Everyone | ** Support | |
| San Diego County Bicycle Coalition | ** Support | |
| San Francisco Bicycle Coalition | ** Support | |
| Streets Are For Everyone | ** Support | |
| Streets for All | ** Support | |
| Strong Towns Artesia | ** Support | |
| Strong Towns Santa Barbara | ** Support |
SENATE COMMITTEE ON
Senator Anna Caballero, Chair
2025 - 2026 Regular Session
SB 455 (Blakespear) - Electric bicycles
Version: | Policy Vote: |
Urgency: | Mandate: |
Hearing Date: | Consultant: |
Bill Summary:
SB 455 would change the definition of “mopeds” and “motor-driven cycles,” create a new vehicle classification of “low-powered moped,” and add labeling and noticing requirements for manufacturers and retailers of electric bicycles (E-bikes).
Fiscal Impact:
- The Department of Motor Vehicles (DMV) indicates that it could incur one-time costs to make legacy IT systems modifications to enable the department to receive violations of new Vehicle Code provisions created by the bill and report violations on offenders’ driving records, which could include assignment of Negligent Operator Treatment System points. These costs are unknown, but potentially significant because DMV is undertaking an Enterprise Modernization Project (the Digital eXperience Platform, or DXP). Coordinating implementation of the bill with DXP might delay implementation, potentially increase DXP costs, or may require DMV to build a temporary solution outside the core legacy systems at a significant cost. DMV costs to modify its website, publications, and manuals to account for revised definitions and requirements in the bill would likely be relatively minor. Staff notes that DMV would be unable to make the necessary programming changes by the January 1, 2026 operative date of this bill. (Motor Vehicle Account)
- The California Highway Patrol (CHP) indicates that any enforcement costs would be minor and absorbable. (Motor Vehicle Account)
- Unknown, potentially reimbursable local law-enforcement costs related to provisions that require a peace officer to record specified information from an E-bike label when filling out an incident report for an injury or crash involving an E-Bike. It is unclear whether any local agency would seek state-reimbursement for any incremental costs related to recording this additional information on incident reports. State-reimbursement of any local costs would be subject to a determination by the Commission on State Mandates, should a local agency file a claim. (General Fund)
Background:
Existing law defines an E-bike as a bicycle equipped with fully operable pedals and an electric motor of less than 750 watts. Existing law specifies three categories of E-bikes, including low-speed pedal assisted E-bikes (Class 1), low-speed throttle-assisted E-bikes (Class 2), and speed pedal-assisted E-bikes (Class 3). Classes 1 and 2 E-bikes cease to provide assistance when they reach 20 mph, and Class 3 E-bikes cease to provide assistance when they reach 28 mph. Existing law requires manufacturers and distributors of E-bikes to apply a permanently affixed label that contains the classification number, top assisted speed, and motor wattage. Existing law prohibits the sale of a product or device that can modify the speed capability of an E-bike such that it no longer meets the definition of an E-bike.
Existing law defines a “motorized bicycle” or “moped” as a two-wheeled or three-wheeled device having fully operative pedals for propulsion by human power, or having no pedals if powered solely by electrical energy, and an automatic transmission and a motor that produces less than 4 gross brake horsepower and is capable of propelling the device at a maximum speed of not more than 30 miles per hour on level ground. Exiting law also defines a “motor-driven cycle” as any motorcycle with a motor that displaces less than 150 cubic centimeters. A motor-driven cycle does not include a “motorized bicycle.”
Proposed Law:
SB 455 would make numerous changes to these classifications to explicitly exclude certain vehicles from the definition of an E-bike and create a new classification of “low-powered moped.” Among other things, this bill would:
- Explicitly exclude from the definition of E-bike a vehicle capable of exceeding 28mph without pedal assistance, a motorcycle, a motor driven cycle, and a low-power moped, as specified.
- Revise the definition of a moped to exclude devices that produce 3 gross brake horsepower or less and devices electrically powered with a potential output of 2,250 watts or less. These lower powered devices would be classified under a new definition for “low-powered mopeds.”
- Establish new requirements for the operation of these newly classified devices, including requirements for operators under the age of 18 to have a motorcycle license, while adults could operate a low powered moped with any driver’s license. All operators must wear a bicycle helmet, and these devices would be limited to roads with a speed limit of 35mph or less, and would be prohibited from operation on bike lanes and sidewalks.
- Specify that operators of low-power mopeds are subject to all provisions applicable to a driver under the Vehicle Code, but they are not subject to provisions relating to financial responsibility, registration, and license plate requirements, and for those specific purposes, a low-power moped is not a motor vehicle.
- Revise the labeling requirements for E-bikes to require an etching, engraving, or permanently affixed label that contains specified information, including the brand name and manufacturer, in addition to existing labeling content.
- Require any incident report filed by a peace officer for an injury or crash involving an E-bike to include all the information provided on an E-bike’s label or etching.
- Require any product or device sold as an E-bike in the last five years that would no longer qualify as an E-bike under the bill to be subject to a written customer notification by the retailer or manufacturer that the device no longer meets the definition of an E-bike, as specified.
Related Legislation:
SB 381 (Min), Chap. 869/2023, required the Mineta Transportation Institute at San Jose State University, in consultation with relevant stakeholders, to conduct a study on E-bikes to inform of efforts to improve the safety of all users of the transportation system and report to the Legislature by January 1, 2026.
Staff Comments:
This bill amends numerous definitions in existing law to address problems associated with certain out-of-class (overpowered) E-bikes by clearly distinguishing between E-bikes, low-powered mopeds, motorized bicycles/mopeds, and motor-driven cycles. SB 455 would ban from public roads any device not specifically captured under one of the classifications of devices, and would only authorize undefined devices to be used on private roads or in off-highway environments. Devices are currently on the market—primarily from online retailers—that allow riders to travel at speeds greater than that of a legal E-bike (i.e. over 28 mph with pedal assist). Some of these devices are illegally advertised as E-bikes, but have top speeds listed at 40 or 50 mph. Manufacturers of legal E-bikes contend that these out-of-class devices do not have appropriate safety features necessary for their top speeds, and argue that these too-fast, “rogue e-vehicles” are circumventing California law, endangering riders, and propagating misplaced suspicion on legal E-bikes.
The Motor Vehicle Account (MVA) is the primary funding source for the California Highway Patrol and DMV. The Legislative Analyst’s Office (LAO) published a report last year as part of its analysis of the Governor’s proposed 2024-25 Budget entitled “Insolvency Risks for Environmental and Transportation Special Funds” that includes an evaluation of the MVA. The report notes that between 2018-19 and 2023-24, MVA revenues have increased by $714 million while expenditures have increased by about $1 billion, and since 2021-22, annual expenditures have exceeded yearly revenues, resulting in a structural imbalance. The MVA is expected to fully exhaust its reserves in in 2025-26, with expenditures expected to exceed available resources by roughly $140 million. Staff notes that the Governor’s proposed 2025-26 Budget would address the issue on a one-time basis by transferring $85 million from the Air Pollution Control Fund and $81 million from the Greenhouse Gas Reduction Fund to the MVA to support the California Air Resources Board's Mobile Source Program, which has received MVA support in the past. Absent further actions to address the MVA fund condition, approving any new proposals that would increase MVA expenditures would exacerbate the current structural imbalance of the fund.
-- END --
SENATE COMMITTEE ON TRANSPORTATION
Senator Dave Cortese, Chair
2025 - 2026 Regular
Bill No: SB 455 Hearing Date: 04/28/2025
Author: | Blakespear | ||
Version: | 4/21/2025 Amended | ||
Urgency: | No | Fiscal: | Yes |
Consultant: | Isabelle LaSalle | ||
SUBJECT: Electric bicycles
DIGEST: This bill changes the definitions of mopeds and motor-driven cycles, creates a new classification of low-powered moped, and adds labeling and noticing requirements for manufacturers and retailers of electric bicycles (e-bikes).
ANALYSIS:
Existing law:
- Defines an e-bike as a bicycle equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power. (VEH §312.5)
- Defines a class 1 e-bike as a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, that ceases to provide assistance when the bicycle reaches the speed of 20 miles per hour (mph), and is not capable of providing assistance to reach speeds greater than 20 miles per hour. (VEH 312.5)
- Defines a class 2 e-bike as a bicycle equipped with a motor that may be used exclusively to propel the bicycle, and that is not capable of providing assistance when the bicycle reaches the speed of 20 mph. (VEH 312.5)
- Defines a class 3 electric bicycle as a bicycle equipped with a motor that provides assistance only when the rider is pedaling, that is not capable of exclusively propelling the bicycle, and that ceases to provide assistance when the bicycle reaches the speed of 28 mph, and equipping with a speedometer. (VEH 312.5)
- Prohibits the following vehicles from being sold as an electric bicycle: vehicles with two or three wheels powered by an electric motor that is intended by the manufacturer to be modifiable to attain a speed greater than 20 miles per hour on motor power alone or to attain more than 750 watts of power, a vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone or to have motor power of more than 750 watts, and a vehicle that is modified to have its operable pedals removed. (VEH §312.5)
- Requires manufactures and distributors of electric bicycles to apply a label that is permanently affixed, in a prominent location, to each electric bicycle. The label shall contain the classification number, top assisted speed, and motor wattage of the electric bicycle, and shall be printed in Arial font in at least 9-point type. (VEH 312.5)
- Defines a “motorcycle” as a motor vehicle having a seat or saddle for the use of the rider, designed to travel on not more than three wheels in contact with the ground. (VEH §400)
- Defines a “motorized bicycle” or “moped” as a two-wheeled or three-wheeled device having fully operative pedals for propulsion by human power, or having no pedals if powered solely by electrical energy, and an automatic transmission and a motor that produces less than 4 gross brake horsepower and is capable of propelling the device at a maximum speed of not more than 30 miles per hour on level ground. (VEH §406)
- Defines a “motor-driven cycle” as any motorcycle with a motor that displaces less than 150 cubic centimeters. A motor-driven cycle does not include a motorized bicycle, as defined in Section 406. (VEH §405)
- Defines a “motorized scooter” as any two-wheeled device that has handlebars, has either a floorboard that is designed to be stood upon when riding or a seat and footrests in place of the floorboard, and is powered by an electric motor. This device may also be designed to be powered by human propulsion. (VEH §407.5)
This bill:
- Narrows the definition of a moped to exclude devices with less than 3 gross brake horsepower or less than 2,250 watts of potential output.
- Clarifies that the definition of a “motor-driven cycle” includes vehicles with pedals and expands the definition to include power and speed limitations for electric motor-driven cycles.
- Clarifies devices that are not included in the definition of e-bikes.
- Creates the new classification of a “low-powered moped” that has less than 3 gross horsepower or 2,250 watts. Limits what streets “low-power mopeds” can be used on and specifies age, helmet, and licensing requirements for their use.
- Prohibits a two-wheeled or three-wheeled device from operating on any public road unless the device meets a definition of a device that is explicitly defined in the Vehicle Code. Allows these devices to be operate in off-highway environment.
- Expands the requirement that manufacturers and distributors of electric bicycles and low-powered mopeds apply labels to these devices to include the brand name and manufacturer or distributor and requires that the label be positioned skyward on the frame. Further requires a low-powered moped’s label to state: “this is a low-power moped, not an electric bicycle.”
- Requires that any incident report filed by a peace officer for an injury or crash involving an e-bike must include all of the information provided on the e-bike’s label.
- Requires a retailer or manufacturer of a device sold in the previous five years as an electric bicycle that no longer meets the definition of electric bicycle to provide written notification to affected customers, including by email, that the product or device no longer meets the definition of an electric bicycle.
COMMENTS:
- Purpose of the bill. According to the author, “E-bikes have become a popular mode of transportation for people, including those looking to move away from car dependency; unfortunately, some “e-bikes” are actually mopeds or motorcycles because of their speed and power. Cities in my district have tried to tackle these out-of-class e-bikes, but statewide reform is needed. Unlike e-bikes, these devices are not safe for children to ride, and they should not be driven on sidewalks or bike lanes. SB 455 creates a new vehicle category of low-power moped, subjecting them greater safety regulations than e-bikes, and clarifies that they are not e-bikes. It also improves labeling requirements and data collection to better understand what types of devices are involved in collisions and how many people get injured by them.”
- What’s an e-bike? Electric bicycles, or e-bikes, look like regular bicycles but include an electric motor and battery. These bikes are rapidly growing in popularity. The global e-bike market size was valued at $43.59 billion in 2023. The market is projected to grow from $50.14 billion in 2024 to $148.70 billion by 2032.[1] In California, e-bikes must be equipped with fully operable pedals and an electric motor that does not exceed 750 watts of power. The fastest e-bikes are class three, with a maximum pedal assisted speed of 28 mph. A bicycle that is capable of going faster than 20 mph using a throttle alone or faster than 28 mph because of pedal assist is not an e-bike under California law.
Current law protects consumers from false adverting pertaining to misclassified or out-of-class e-bikes. Specifically, it is illegal to advertise or sell any of the following vehicles as e-bikes:
- A vehicle with two or three wheels powered by an electric motor that is intended by the manufacturer to be modifiable to attain a speed greater than 20 miles per hour on motor power alone or to attain more than 750 watts of power.
- A vehicle that is modified to attain a speed greater than 20 miles per hour on motor power alone or to have motor power of more than 750 watts.
- A vehicle that is modified to have its operable pedals removed.
- Benefits of e-bikes and other devices. Emissions from the transportation sector, the state’s largest source of greenhouse gases (GHGs), are still on the rise despite statewide GHG emission reduction efforts and increasingly ambitious targets. According to California Air Resources Board (ARB)’s GHG emission inventory, the transportation sector emissions have grown to 41% of California’s total emissions as of 2017. A 2018 Legislative Analyst’s Office report found that roughly 90% of the transportation sector’s emissions were from on-road sources – 69% passenger vehicles and 22% heavy-duty vehicles. Within the transportation sector, measures to reduce GHG emissions include requiring the use of low carbon fuels, cleaner vehicles, and strategies to promote sustainable communities, and improved transportation choices that reduce growth in the number of vehicle miles traveled (VMT).
Mode shift – getting people out of their cars and onto public transit and active transportation – is an important component of success. Electric bicycles are an increasingly popular option for reducing personal car trips. According to the US Bureau of Transportation statistics, more than half of all trips in the US are under three miles. According to the University of Oxford study The Climate Change Mitigation Effects of Daily Active Travel in Cities, riding a bike just once a day can slash an individual’s transportation emissions by 67%. Furthermore, according to a survey from Transport for London, 28% of respondent e-bike riders reported that they bought their e-bike as a substitute for a car.
- Classification of bike-like devices. The California Vehicle Code classifies an array of vehicles and devices that range from motorcycles to e-bikes. SB 455 makes numerous changes to these classifications. The most powerful device this bill amends the definition of is a motor-driven cycle, which is similar to a motorcycle, but with a smaller engine. Drivers must register a motor-driven cycle and must have a motorcycle license (M1) to drive one. SB 455 adds new specifications to encompass electric motor-driven cycles, capping their allowable speed at 40 mph and maximum output at less than 10,000 watts.
The most significant changes to an existing definition in this bill are to mopeds, also known as motorized bicycles. Mopeds are currently defined as having a maximum speed of 30 mph. They have 2-3 wheels and an electric motor with an automatic transmission that produces less than 4 gross brake horsepower. Some mopeds have pedals so they can be ridden when the motor is off. Drivers must have a motorcycle license (M1 or M2) to drive a moped. Drivers must also be at least 16 years old to drive a moped, and must wear a helmet while they ride. SB 455 narrows the definition to exclude devices with lower horsepower or lower watts. Specifically, devices producing 3 gross brake horsepower or less and devices electrically powered with a potential output 2,250 watts or less would be recategorized under a new classification in this bill.
- Creation of a low-power moped. SB 455 seeks to create a new category of device called a low-power moped. The intent of this change is to subsume some devices that otherwise could be considered out-of-class (and thus illegal) e-bikes. The bill also seeks to address confusion brought on by the broad overuse of the term “e-bike” to refer to devices that could be mopeds. Low-power mopeds would be similar to mopeds in appearance and speed (30 mph), but would have lower horsepower or output watts than regular mopeds.
The bill sets numerous requirements on the operation of these newly reclassified devices. Drivers under the age of 18 would need an M1 or M2 license to operate the low-power moped, but adults would only need a driver’s license. These devices would be limited to roads with posted speed limits of 35 mph or less and prohibited from bike lanes and sidewalks.
As written, the bill requires operators to ride as close as practicable to the right-hand curb or right edge of the roadway. This requirement may cause confusion about where low-power mopeds should ride if they must be as far to the right-hand curb as possible, but not in the bike lane. The author may wish to consider clarifying that low-power mopeds must operate in the traffic lane.
- Undefined devices banned. This bill clarifies what vehicles and devices should not be considered e-bikes under current law. Among other clarifying changes, the bill specifies that a device that is capable of providing assistance when the device reaches a speed exceeding 28 mph would not be an e-bike. The bill also clarifies that motorcycles, motor-driven cycles, mopeds, and low-power moped are not e-bikes. According to the author’s office, out-of-class e-bikes are often called e-bikes by media, law enforcement, and members of the public. These clarifications may reduce the misuse of the term e-bike, potentially reducing misplaced safety concerns about true e-bikes.
As written, SB 455 would ban from public roads any device not specifically captured under one of the classifications of devices. The bill would authorize undefined devices use only on private roads or in off-highway environments. Devices are currently on the market—primarily from online retailers—that allow riders to travel at speeds greater than that of a legal e-bike (i.e. over 28 mph with pedal assist). Some of these devices are illegally advertised as e-bikes, but have top speeds listed at 40 or 50 mph. Manufactures of true (legal) e-bikes contend that these out-of-class devices do not have appropriate safety features necessary for their top speeds. For example, these devices may be equipped with brakes designed for a regular bicycle and not a motorized device. The manufactures of legal e-bikes argue that these too-fast, “rogue e-vehicles” are circumventing California law, endangering riders, and propagating misplaced suspicion on legal e-bikes.
- Customer noticing requirements. Last year, the Legislature passed SB 1271 (Min, Chapter 891, Statutes of 2024) which modified the definition of an e-bike to make it clear that it cannot be capable of going speeds greater than 20 miles per hour (class 1 or 2) or 28 miles per hour on pedal assist (class 3). With these changes, and, to a lesser extent, with the changes in SB 455, some devices that were legally sold as e-bikes may no longer be legal e-bikes under California law. To address these changes, this bill requires manufactures and retailers to send affected customers a notice informing them that their device no longer meets the definition of an electric bicycle under state law. Furthermore, if the product meets the current definition of another type of device, the notice must include that information and inform the customer that they may be required to meet additional legal requirements, such as registration and licensing. This provision raises a number of questions. For example, what if the retailer does not have the contact information for a customer? Additionally, some manufactures raise concerns about the appropriateness of a requirement to provide legal advice to a customer.
- Law enforcement reporting. In addition to the new reclassification of electric devices, SB 455 adds labeling requirements to low-powered mopeds and expands existing labeling requirements for e-bikes. These labels would need to be positioned skyward on the frame and contain the brand name, manufacturer or distributor, classification number, top assisted speed, and motor wattage. The label on low-power mopeds would additionally need to state: “this is a low-power moped, not an electric bicycle.” The information on the new and expanded labels would then be required to be reported by law enforcement in incident reports for an injury or crash involving an electric bicycle.
- Is the bill premature? In 2023, the Legislature passed SB 381 (Min, Chapter 869, Statutes of 2023), which required the Mineta Transportation Institute at San Jose State University, in consultation with relevant stakeholders, to conduct a study on electric bicycles and the safety of riders and pedestrians by January 1, 2026. The author may wish to consider waiting until the results of the study are available before making substantive changes to the definitions of electric devices in current law.
Related/Previous Legislation:
SB 586 (Jones, 2025) -- Would define an eMoto as an electric two-wheeled device built on a bicycle infrastructure that does not have pedals or an engine number, designates eMotos as off-highway vehicles (OHV), and develops guidelines and training for their usage. This bill passed out of this committee 14-0 and is currently pending in the Senate Appropriations Committee.
AB 875 (Muratsuchi, 2025) -- Would authorize a peace officer to either impound a bicycle with an electric motor capable of going speeds greater than what is permitted by an e-bike or a class 3 e-bike if the person operating it is under the age of 16. This bill is currently pending in the Assembly Transportation Committee.
AB 545 (Davies, 2025) -- Would add applications to the list of products that a person cannot sell to modify the speed capability of an electric bicycle (e-bike) such that it no longer meets the statutory definition of an e-bike. This bill is currently pending in the Assembly Appropriations Committee.
SB 1271 (Min, Chapter 791, Statutes of 2024) -- Prohibited a person from selling, leasing, renting or offering for sale, lease or rent an e-bike unless the battery has been tested by an accredited testing laboratory for compliance with certain standards and modifies the definition of an e-bike.
SB 381 (Min, Chapter 869, Statutes of 2023) -- Requires the Mineta Transportation Institute at San Jose State University, in consultation with relevant stakeholders, to conduct a study on electric bicycles and the safety of riders and pedestrians by January 1, 2026.
AB1909 (Friedman, Chapter 343, Statutes of 2022) -- Removed the authority for local governments to prohibit electric bicycles on bicycle paths or lanes.
AB 1946 (Boerner, Chapter 147, Statutes of 2022) -- Required the California Highway Patrol to develop statewide safety and training programs based on evidence-based practices for uses of e-bikes.
FISCAL EFFECT: Appropriation: Fiscal Com.: Local:
POSITIONS: (Communicated to the committee before noon on Wednesday, April 23, 2025.)
SUPPORT:
Active San Gabriel Valley
Bike Culver City
Bike East Bay
Bike Long Beach
California Orthopedic Association
Car-lite Long Beach
Circulate San Diego
Costa Mesa Alliance for Better Streets
East Bay for Everyone
Everybody's Long Beach
Families for Safe Streets San Diego
Glendale Yimby
Long Beach Bike Co-op
Los Angeles Walks
Napa County Bicycle Coalition (napa Bike)
Norwalk Unides
Remake Irvine Streets for Everyone (RISE)
San Diego County Bicycle Coalition
San Francisco Bicycle Coalition
Streets are for Everyone (SAFE)
Streets for All
Strong Towns Artesia
Strong Towns Santa Barbara
Ebikeaccess.org (Support if amended)
OPPOSITION:
Peopleforbikes (Oppose unless amended)
ARGUMENTS IN SUPPORT:
Writing in support, Streets are For Everyone states, “We urge you to support SB 455, legislation designed to improve safety and clarity around electric bicycles (e-bikes) in our communities. As e-bikes become increasingly popular, clear regulations and better information are essential for protecting riders, pedestrians, and other road users….SB 455 provides straightforward solutions to real-world problems arising from the rapid growth of e-bike usage. By improving data collection, consumer transparency, and vehicle classification, SB 455 makes transportation safer and simpler for all Californians.”
ARGUMENTS IN OPPOSITION:
Writing in opposition, PeopleforBikes states, “I write to you on behalf of PeopleForBikes to express our position on SB 455 of OPPOSE UNLESS AMENDED. This bill as proposed to be amended would unnecessarily burden manufacturers of electric bicycles. PeopleForBikes also suggests that further definitional and regulatory changes are needed for the proposed new motor vehicle class of ‘low-power moped.’… Because their sellers often confusingly claim these products are “street legal e-bikes” or Class 2 electric bicycles, consumers are being deceived into buying E-motos thinking that they are electric bicycles and therefore exempt from motor vehicle requirements or worse: able to be operated by underaged youth on busy public streets…. Let’s be clear: more regulation of electric bicycles - as proposed in SB 455 - will not fix the E-moto problem. These additional requirements should be removed from the bill.”
-- END --
https://www.fortunebusinessinsights.com/electric-e-bike-market-102022 ↑
Discussed in Hearing
Senate Standing Committee on Transportation
Bill Author
Bill Co-Author(s):